Polpriklopnik kiper

WIELTON Bulk Master 3-Achs-Kippsattelauflieger 47 cbm

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.205 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Overall width: 10,402 mm Internal floor length: 8,585 mm External width: 2,550 mm Overall height up to top frame: 3,550 – 3,600 mm Overall height up to top of tarpaulin: 3,710 – 3,760 mm Track width: 2,040 mm King pin to 2nd axle distance: 6,120 mm Fifth wheel height: 1,200 mm Axle spacing: 1,310 mm Rear overhang: 1,367 mm Floor height: 1,400 – 1,450 mm Max height with body fully tipped: 9,720 – 9,770 mm Technical gross vehicle weight: 42,000 kg Axle load: 8,000 kg Technical axle load: 9,000 kg Fifth wheel load: 12,000 kg Technical fifth wheel load: 15,000 kg Load volume: 47.6 cbm Unladen weight: 6,233 kg Weight stated with an accuracy of +/-3% Axle spacing: 1,310 mm Distance king pin to 2nd axle: 6,120 mm Steel underrun protection Ijdpswz Auyjfx Ab Uetr Foldable rear underrun protection Chassis frame with lowered gooseneck, longitudinal beams with recessed fifth wheel area Welded, weight-optimized construction made of high-strength S700 steel Side impact protection made from aluminum profiles according to ECE 73 2 plastic wheel chocks Axles and suspension: 1,200 mm fifth wheel height (unladen) Rigid axles 3rd lift axle 1st lift axle SAF disc brake axles 3x 9,000 kg 22.5" INTRADISC CD 2-speed gearbox landing leg, full load (BPW Gen2 FL/SAF Hercules) Full PVC mudguards, 6 pcs Rubber mudflaps with Wielton logo behind third axle 6x steel rims 22.5-11.75 ET=120 Nut protection caps Tyres: 6x tyres 385/65/22.5 standard (Bridgestone/Hankook) Other chassis equipment: Toolbox 44 L (mounted front left on chassis) Water container 30 L (mounted centre left on chassis) Dust bag holder on chassis, 1 pc Dust bag, 2 pcs Shovel and broom mounted on the chassis above the mudguard Extendable rear ladder Internal height: 2,100 mm Double-wing aluminium combi door (½ vertically split) with portal beam Side walls, interior thickness 2.5 mm, fully welded Front wall inclined 20 degrees Pallet-width design 7 mm floor 2 grain discharge slides 2 locking clamps underneath Cross member spacing under floor: 360 mm Polymer body dampers Body extras: Tension chain between side walls Operator platform on chassis frame, access front left (driver's side) PVC rolling tarp 680 g/m² with fastener and aluminium winding tube (vertical rear edge with extension triangle front and rear, centre tube welded into tarp) Braking system/pneumatics: Steel air tanks Spring pressure gauge Automatic lowering during tipping Wabco braking system 2S/2M Chassis painting: Chassis painted RAL 7021 (black grey) Body painting: Body painted RAL 7001 (silver grey) Tarpaulin colour RAL 9006 (white aluminium) Hydraulics: HYVA hydraulic cylinder, upper eye mounting Hydraulic connection kit 1" Electrics: Partial LED lighting 2x LED reversing lamps 2x 7-pin, 1x 15-pin with EBS connector (no linking cables to tractor unit) Lighting: partial LED, Aspöck-EUROPOINT III 2 LED work lights at landing legs Additional systems: Tipping angle indicator Control line for lift axle from driver’s cab The system is developed for semi-trailers and trailers and is used to monitor the tyre pressure and tyre temperature of the vehicle. Manufacturer: ABERG Connect. The system comprises TPMS sensors (tyre pressure and temperature) mounted to the wheel rims and a device connected to the EBS. Reflective warning panels Partial contour marking with Wielton logo Partial contour marking side: white Partial contour marking rear: red Wielton warning decals Warranty: The manufacturer grants a 24-month warranty on the vehicle.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.205 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Overall width: 10,402 mm Floor length: 8,585 mm Total width: 2,550 mm Overall height to upper frame: 3,550 – 3,600 mm Overall height to tarp peak: 3,710 – 3,760 mm Track width: 2,040 mm King pin to second axle: 6,120 mm Fifth wheel height: 1,200 mm Axle spacing: 1,310 mm Rear overhang: 1,367 mm Floor height: 1,400 – 1,450 mm Maximum height with the body tipped: 9,720 – 9,770 mm Technical gross weight: 42,000 kg Axle load: 8,000 kg Axle load, technical: 9,000 kg Itsdsp Ncb Nspfx Ab Usr Saddle load: 12,000 kg Saddle load, technical: 15,000 kg Loading volume: 47.6 cbm Unladen weight: 6,233 kg Weight stated with an accuracy of +/-3% Axle spacing: 1,310 mm Distance kingpin to 2nd axle: 6,120 mm Steel underrun protection Foldable rear underrun protection Chassis frame with dropped gooseneck, longitudinal beams with recessed fifth wheel plate area Welded structure, weight-optimized using high-grade S700 steel Side impact protection from aluminum profiles in accordance with ECE 73 2 plastic wheel chocks Axles and suspension 1,200 mm unladen fifth wheel height Rigid axles 3rd lift axle 1st lift axle SAF disc brake axles 3x 9,000 kg 22.5 INTRADISC CD 2-speed landing legs, full load (BPW Gen2 FL/SAF Hercules) Full PVC mudguards, 6 pieces Rubber mud flaps with Wielton logo behind third axle 6x steel wheels 22.5–11.75 ET=120 Protective caps for wheel bolts Tyres 6x 385/65/22.5 standard tyres (Bridgestone/Hankook) Other chassis equipment 44 L toolbox (mounted front left on the chassis) 30 L water tank (mounted centre left on the chassis) Mount for dust bag on chassis, 1 pc. Dust bag, 2 pcs. Shovel and broom on chassis above mudguard Extendable rear ladder Internal height: 2,100 mm Double-wing aluminium combination door, aluminium (1/2 ?) vertical with portal crossbeam Side walls, SL internal thickness 2.5 mm, fully welded Front wall inclined at 20 degrees Pallet-width design 7 mm floor 2 grain chutes 2 tension latches at the bottom Transverse beam spacing under the floor: 360 mm Body damping: Polyblock Other superstructure equipment Tension chain between side walls Control stand on chassis frame, access front left (driver’s side) PVC rolling tarp 680 g/m² with quick release and aluminium winding tube (vertical tail with extension triangle at front and rear, centre tube welded into tarp) Braking system/pneumatics Steel air tanks Spring pressure gauge Automatic lowering when tipping Wabco brake system 2S/2M Chassis paintwork Chassis painted RAL 7021 (black grey) Body paintwork Body painted RAL 7001 (silver grey) Tarp colour RAL 9006 (white aluminium) Hydraulics HYVA hydraulic cylinder, upper eye mount Hydraulic connection kit 1" Electrics Partial LED lighting LED reverse lights 2 pcs. 2x 7-pin + 1x 15-pin with EBS connection, without link cables to tractor unit Lighting partial LED Aspöck-EuroPoint III 2 LED work lights on landing legs Additional systems Tipping angle indicator Control line for lift axle from cab The system is designed for semi-trailers and trailers and monitors the vehicle’s tyre pressure and temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors mounted on the rims (monitoring tyre pressure and temperature) and a device connected to the EBS. Reflective warning signs Partial contour marking with Wielton logo Partial side contour marking, white