Polpriklopnik kiper

WIELTON Bulk Master 3-Achs-Kippsattelauflieger 47 cbm

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.205 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Overall width: 10,402 mm Internal floor length: 8,585 mm External width: 2,550 mm Overall height up to top frame: 3,550 – 3,600 mm Overall height up to top of tarpaulin: 3,710 – 3,760 mm Track width: 2,040 mm King pin to 2nd axle distance: 6,120 mm Fifth wheel height: 1,200 mm Axle spacing: 1,310 mm Rear overhang: 1,367 mm Floor height: 1,400 – 1,450 mm Max height with body fully tipped: 9,720 – 9,770 mm Technical gross vehicle weight: 42,000 kg Axle load: 8,000 kg Technical axle load: 9,000 kg Fifth wheel load: 12,000 kg Technical fifth wheel load: 15,000 kg Load volume: 47.6 cbm Unladen weight: 6,233 kg Weight stated with an accuracy of +/-3% Axle spacing: 1,310 mm Distance king pin to 2nd axle: 6,120 mm Steel underrun protection Foldable rear underrun protection Chassis frame with lowered gooseneck, longitudinal beams with recessed fifth wheel area Welded, weight-optimized construction made of high-strength S700 steel Side impact protection made from aluminum profiles according to ECE 73 2 plastic wheel chocks Axles and suspension: 1,200 mm fifth wheel height (unladen) Rigid axles 3rd lift axle 1st lift axle SAF disc brake axles 3x 9,000 kg 22.5" INTRADISC CD 2-speed gearbox landing leg, full load (BPW Gen2 FL/SAF Hercules) Full PVC mudguards, 6 pcs Rubber mudflaps with Wielton logo behind third axle 6x steel rims 22.5-11.75 ET=120 Nut protection caps Tyres: 6x tyres 385/65/22.5 standard (Bridgestone/Hankook) Other chassis equipment: Toolbox 44 L (mounted front left on chassis) Water container 30 L (mounted centre left on chassis) Dust bag holder on chassis, 1 pc Dust bag, 2 pcs Shovel and broom mounted on the chassis above the mudguard Extendable rear ladder Internal height: 2,100 mm Double-wing aluminium combi door (½ vertically split) with portal beam Side walls, interior thickness 2.5 mm, fully welded Front wall inclined 20 degrees Pallet-width design 7 mm floor 2 grain discharge slides 2 locking clamps underneath Cross member spacing under floor: 360 mm Polymer body dampers Body extras: Tension chain between side walls Operator platform on chassis frame, access front left (driver's side) PVC rolling tarp 680 g/m² with fastener and aluminium winding tube (vertical rear edge with extension triangle front and rear, centre tube welded into tarp) Braking system/pneumatics: Steel air tanks Spring pressure gauge Automatic lowering during tipping Wabco braking system 2S/2M Chassis painting: Chassis painted RAL 7021 (black grey) Body painting: Body painted RAL 7001 (silver grey) Tarpaulin colour RAL 9006 (white aluminium) Knsdpfowz Autsx Ab Ujf Hydraulics: HYVA hydraulic cylinder, upper eye mounting Hydraulic connection kit 1" Electrics: Partial LED lighting 2x LED reversing lamps 2x 7-pin, 1x 15-pin with EBS connector (no linking cables to tractor unit) Lighting: partial LED, Aspöck-EUROPOINT III 2 LED work lights at landing legs Additional systems: Tipping angle indicator Control line for lift axle from driver’s cab The system is developed for semi-trailers and trailers and is used to monitor the tyre pressure and tyre temperature of the vehicle. Manufacturer: ABERG Connect. The system comprises TPMS sensors (tyre pressure and temperature) mounted to the wheel rims and a device connected to the EBS. Reflective warning panels Partial contour marking with Wielton logo Partial contour marking side: white Partial contour marking rear: red Wielton warning decals Warranty: The manufacturer grants a 24-month warranty on the vehicle.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.205 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Overall width: 10,402 mm Internal floor length: 8,585 mm External width: 2,550 mm Overall height up to top frame: 3,550 – 3,600 mm Overall height up to top of tarpaulin: 3,710 – 3,760 mm Track width: 2,040 mm King pin to 2nd axle distance: 6,120 mm Fifth wheel height: 1,200 mm Axle spacing: 1,310 mm Rear overhang: 1,367 mm Floor height: 1,400 – 1,450 mm Max height with body fully tipped: 9,720 – 9,770 mm Technical gross vehicle weight: 42,000 kg Axle load: 8,000 kg Technical axle load: 9,000 kg Fifth wheel load: 12,000 kg Technical fifth wheel load: 15,000 kg Load volume: 47.6 cbm Unladen weight: 6,233 kg Weight stated with an accuracy of +/-3% Axle spacing: 1,310 mm Distance king pin to 2nd axle: 6,120 mm Steel underrun protection Foldable rear underrun protection Chassis frame with lowered gooseneck, longitudinal beams with recessed fifth wheel area Welded, weight-optimized construction made of high-strength S700 steel Side impact protection made from aluminum profiles according to ECE 73 2 plastic wheel chocks Axles and suspension: 1,200 mm fifth wheel height (unladen) Rigid axles 3rd lift axle 1st lift axle SAF disc brake axles 3x 9,000 kg 22.5" INTRADISC CD 2-speed gearbox landing leg, full load (BPW Gen2 FL/SAF Hercules) Full PVC mudguards, 6 pcs Rubber mudflaps with Wielton logo behind third axle 6x steel rims 22.5-11.75 ET=120 Nut protection caps Tyres: 6x tyres 385/65/22.5 standard (Bridgestone/Hankook) Other chassis equipment: Toolbox 44 L (mounted front left on chassis) Water container 30 L (mounted centre left on chassis) Dust bag holder on chassis, 1 pc Dust bag, 2 pcs Shovel and broom mounted on the chassis above the mudguard Extendable rear ladder Internal height: 2,100 mm Double-wing aluminium combi door (½ vertically split) with portal beam Side walls, interior thickness 2.5 mm, fully welded Front wall inclined 20 degrees Pallet-width design 7 mm floor 2 grain discharge slides 2 locking clamps underneath Cross member spacing under floor: 360 mm Polymer body dampers Body extras: Tension chain between side walls Operator platform on chassis frame, access front left (driver's side) PVC rolling tarp 680 g/m² with fastener and aluminium winding tube (vertical rear edge with extension triangle front and rear, centre tube welded into tarp) Braking system/pneumatics: Steel air tanks Spring pressure gauge Automatic lowering during tipping Wabco braking system 2S/2M Kodpfx Aswz Auyjb Uenf Chassis painting: Chassis painted RAL 7021 (black grey) Body painting: Body painted RAL 7001 (silver grey) Tarpaulin colour RAL 9006 (white aluminium) Hydraulics: HYVA hydraulic cylinder, upper eye mounting Hydraulic connection kit 1" Electrics: Partial LED lighting 2x LED reversing lamps 2x 7-pin, 1x 15-pin with EBS connector (no linking cables to tractor unit) Lighting: partial LED, Aspöck-EUROPOINT III 2 LED work lights at landing legs Additional systems: Tipping angle indicator Control line for lift axle from driver’s cab The system is developed for semi-trailers and trailers and is used to monitor the tyre pressure and tyre temperature of the vehicle. Manufacturer: ABERG Connect. The system comprises TPMS sensors (tyre pressure and temperature) mounted to the wheel rims and a device connected to the EBS. Reflective warning panels Partial contour marking with Wielton logo Partial contour marking side: white Partial contour marking rear: red Wielton warning decals Warranty: The manufacturer grants a 24-month warranty on the vehicle.