Rezervoar

O.ME.P.S. SILOS CM27 3-OSIOWY NACZEPA CYSTERNA ...

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2018, Oprema: ABS, Unladen weight: 4,220 kg Lhedpfx Adowqph Sogoi Payload: 35,080 kg Gross vehicle weight (GVW): 39,300 kg

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting Ledpel Sl Izofx Adgjhi ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.495 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prostornina tovornega prostora: 60 m³, skupna dolžina: 13.060 mm, skupna širina: 2.530 mm, vzmetenje: zrak, velikost pnevmatike: 385/65, stanje pnevmatik: 100 odstotek, odmik od tal: 4.000 mm, Leto izdelave: 2026, NOVO TAKOJ DOBAVLJIVO Kassbohrer Silo 60 m³ – SSK 60 Silo za prevoz MOKE, ŽITARIC, SLADKORJA, RIŽA, ŽITARIC, PLASTIKE Prostornina 60 m³ Ledpfx Adezcaaujgshi Dolžina 13.060 mm Lastna masa 6.495 kg BPW osi, 1. dvižna 5 vzdrževalnih odprtin Storz končni spoj Aluminijasta platišča Pnevmatsko dvigalo ograje Elektropoliran izpustni stožec

Stanje: novo, največja dovoljena obremenitev: 96.500 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 26.900 mm, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Hydraulically lift/lowerable and detachable gooseneck, approx. 3,650 mm long * For tractor units: 6x4 or 8x4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for supply line suspension; the tractor unit tank must have at least 80 l capacity * With MAX Trailer coupling units; otherwise, coupling units to be provided ex works by the customer * Gantry with winch for spare wheel mounted at the front of the gooseneck * 3.5-inch king pin * Steel front wall approx. 400 mm high * Removable aluminium side and rear boards on the gooseneck, approx. 400 mm high, anodised finish * Control lever on the gooseneck protected by a folding cover * Operator area lighting at gooseneck, with on/off switch * One 7-pin socket each at the left and right rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for one gooseneck with standard NLGI-2 grease * Hydraulic connections from the gooseneck to the low-bed via screw couplings * Access steps on the gooseneck * Four warning panels extendable by approx. 1,000 mm (approx. 423 x 423 mm) each, with one LED position lamp and bracket for beacon * Mounting adapters for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 hp) at 3,000 rpm * Hydraulic connecting lines between powerpack and connector plate at the gooseneck * One LED worklight left and right on the rear plate of the gooseneck, individually switchable * Radio remote control for: - Operating the powerpack, start/stop of diesel engine. - Operating remote steering (in addition to cable remote), with 2 LED indicator lights on receiver for single-track control. - Lift/lower gooseneck. - Lift/lower suspension of running gear 2-axle front module: * Bolt-eye coupling front and rear. Length: approx. 2,970 mm. Module width: approx. 2,750 mm * BEKA-MAX central lubrication system for 2-axle module with standard NLGI-2 grease (not connected to steering rods) * One 7-pin socket each at the left and right rear of the front module for warning signs * Platform surface with sand coating as slip protection * Yellow reflective tape in accordance with EU regulations at the sides, on the extension, and at the rear of the trailer * One 7-pin socket for warning signs, left and right on the front module, in the axle area * Extendable outriggers approx. 230 mm per side for the 2-axle module Ljdszahp Sopfx Adgshi * 1 pair M42 threaded blocks between the axles of the front module * 1 pair brackets for plug-in warning panels in the stake pockets of the exterior frame of the loading area Loading platform: * 6-axle, double telescopic loading platform with bolt-eye coupling at the front and rear chamfer approx. 500 mm x 8° * Platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Base width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the platform with standard NLGI-2 grease * Platform surface with sand coating as slip protection * 11 pairs of recessed lashing rings in the external frame of the loading platform, foldable outwards (LC 10,000 daN) * Permanently welded intermediate table, approx. 500 mm long * 1 pa...

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 5.980 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, dolžina tovornega prostora: 10.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.000 mm, prostornina tovornega prostora: 52 m³, skupna dolžina: 11.350 mm, skupna širina: 2.550 mm, skupna višina: 3.536 mm, vzmetenje: zrak, velikost pnevmatike: 385/65, stanje pnevmatik: 100 odstotek, Leto izdelave: 2026, NOV TAKOJ NA VOLJO Aluminijasto ogrodje Aluminijasta kad 52 m³ Lastna masa 5.980 kg SAF osi, 1. dvižna, 3. krmiljena Lhedjzbxuzopfx Adgoi Aluminijasta platišča ALCOA Boke višine 2,00 m Dno debeline 8 mm Zadnja vrata z dvojnim odpiranjem NOVO VOZILO VISOKE KAKOVOSTI IZDELAVE CENA LE NA LOKACIJI

Stanje: rabljeno, največja dovoljena obremenitev: 32.780 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2023, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 11.418 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.390 mm, prostornina tovornega prostora: 65 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2023, Oprema: ABS, * Podest z dostopno stopnico in nagibno ploščjo * 1. os dvigljiva * Portalna krilna vrata s dozirnikom za žito ----* LED zadnje luči * Aluminijaste škatle za shranjevanje * Zaščita podvozja * Litje platišč ----* JOST osi z diskovimi zavornimi sistemi Ledpfxoy Ubnxs Adgjhi * HIDRAVLIČNI SISTEM HYVA * Wabco SmartBoard enota * Wabco Trailer EBS-E ----* Dimenzije pnevmatik: 385/65R22,5 * Tehnično največja dovoljena masa: 39000 kg * Lastna masa: 6220 kg * Skupna dolžina: 12830 mm * Medosna razdalja: 8760 mm * Rok za tehnični pregled: 07.2026 ----Številka vozila/Vehicle: 12083----Pridržujemo si pravico do sprememb in napak.----Oglasna sporočila in različni napisi so bili digitalno odstranjeni.-----Z veseljem vam bomo pomagali pri vseh formalnostih, ki so povezane z nakupom vozila. Poročajte nam o svojih željah in predlogih, in poskrbeli bomo za vse. Med drugim vam lahko za doplačilo ponudimo naslednje storitve:----Prevzem vašega starega vozilaPregled TÜV/tehnični pregledCelovit postopek izvozaPomaganje pri pridobivanju financiranjaUrejanje izvoznih registracijskih tablicTransport vozilRegistracija vozilReševalne akcije in transport vozil----?VAŠA VTS EKIPA