Prikolica z zamenljivo nadgradnjo

WECON 4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt

Stanje: rabljeno, največja dovoljena obremenitev: 13.200 kg, skupna masa: 16.000 kg, prva registracija: 04/2016, dolžina tovornega prostora: 7.040 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 38 m³, skupna širina: 2.550 mm, skupna višina: 2.450 mm, Leto izdelave: 2016, WECON Curtainsider SLIDING CURTAIN PLATFORM BDF Swap Body Duke Type WPR 715 SG Year of manufacture First German owner! 4 units of WPR 715 SG with the following specifications: WECON Standard Sliding Curtain Swap Body Duke Type WPR 715 SG External Dimensions: Body length: 7,150 mm Body width: 2,550 mm Internal Dimensions: Body length: 7,040 mm Body width: 2,480 mm Unladen weight: 2,590 kg Gross permitted weight: 16,000 kg Internal height: 2,200 mm with sliding roof included External height: 2,450 mm (corner height 2,450 mm = C 00) Side loading height: 2,120 mm Rear loading height: 2,165 mm Forklift pockets at rear integrated in the floor frame Reinforced zinc tubes for piggyback forklift transport Mount for chain securing required on the body --> Center tunnel limited due to reinforced design Suitable for continuous operation! Chassis: Frame made of quality galvanized steel, frame height 215 mm 4 container corner fittings at 20' basis, 4 grab edges according to EN 284, wheel clearance 120 mm Flooring for swap bodies: Multi-laminated plywood floor approx. 25 mm thick, suitable for forklift use, axle load up to 5,460 kg Landing legs fixed, parking height 1,320 mm, galvanized finish 15 pairs of lashing rings. Distribution: from VK STW to the middle, 1st pair at approx. 400mm, then equal distribution for the rest One pair of lashing rings mounted on the inside of the front wall post, 1,000 mm above the floor Pallet stop edge one-sided, 30 mm high, left in direction of travel, normal curtain side Lashing options through elongated holes (approx. 15 x 30 mm), distance between holes approx. 200 mm Loading height reduced by 30 mm Front wall: Smooth, bolted steel bulkhead, full height cassette design (cassettes galvanized) Birch plywood on the inside of the front wall, 1,500 mm high, 12 mm thick Internal front wall with impact protection: 300 mm high galvanized steel plate Rear portal: Smooth double wing door, sandwich construction, 4 internal locking bars, 4 hinges per door leaf Left side wall: sliding curtain as per DIN EN 12641-2: Quality 890 g/m², webbing spacing 500 x 600 mm, tear resistance: vertical 24 kN, horizontal 13 kN. Stainless steel belt buckle with pressure lock 1 center post, symmetrically placed, left in direction of travel. Posts each with 3 rows of slat sockets included and one row of collection pockets (approx. 600 mm high) on the floor 8 pcs aluminum drop-in slats, left in the direction of travel, approx. 100 mm high WECON RAPIDO RIGHT: vertical steel profiles fixed to the side curtain, guided in top and bottom rails on rollers - Vertical curtain tensioners eliminated - Center posts eliminated - Horizontal drop-in slats eliminated Fixed tarpaulin roof as standard sliding canopy (can only be locked in place) Roof with parallel rails, width between rails approx. 2,370 mm, distance lower edge of rail to lower edge of roof hoop approx. 90 mm Coating: Chassis and landing legs hot-dip galvanized, body parts dip-primed and powder-coated in common RAL color Roof tarpaulin: RAL 9010 (pure white) Side curtain: RAL 9010 (pure white) Front wall: RAL 9010 (pure white) Rear portal: RAL 9010 (pure white) Ksdpfsu Uxr Rox Ab Usnf TÜV Certificate Code XL included Certificate confirms cargo securing effect of the body. Requirement according to VDI 2700, EN 283, EN 12195 Part 1-2000, ADR and others

Stanje: rabljeno, prevoženi kilometri: 695.000 km, moč: 324 kW (440,52 KM), prva registracija: 12/2013, vrsta goriva: dizel, lastna masa: 12.380 kg, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 02/2025, zavore: intarder, barva: bela, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: zrak, Oprema: hidravlika, klimatska naprava, računalnik na krovu, spojka prikolice, zapora diferenciala, Manufacturer: MAN - Type/Model: TGS 26.440 (6x2) 17,000 L - 3 compartments - First registration: 11.12.2013 - Mileage: 676,660 km - Number of axles: 3 - Emission class: Euro 5 - Transmission: Automatic - Suspension: Air - Lift axle - Steering axle - Brakes: Disc - Air conditioning - Length: 9,450 mm - Width: 2,550 mm - Height: 3,150 mm - Unladen weight: 12,380 kg - TÜV inspection due: 02/2025 - Body manufacturer: Jansky - Tank material: Stainless steel - Total tank volume: 17,000 L - Tank compartments: 3 - System designation: Jansky Optimate - Stainless steel centrifugal pump - DICO 700 - Sampler (drum cassettes) - Data transfer - CIP cleaning - Sump tray Ksdpeq H Szgsfx Ab Uonf

Stanje: rabljeno, največja dovoljena obremenitev: 13.200 kg, skupna masa: 16.000 kg, prva registracija: 06/2017, dolžina tovornega prostora: 7.040 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 38 m³, skupna širina: 2.550 mm, skupna višina: 2.450 mm, Leto izdelave: 2017, WECON Curtainsider (Sliding Tarp Flatbed) BDF Swap Body Model: Duke Type WPR 715 SG Year of manufacture: 06/2017 German first ownership! 3 units WPR 715 SG with the following equipment: Kodpev Rtyaofx Ab Usnf WECON standard sliding curtain swap body Duke Type WPR 715 SG External dimensions: Body length: 7,150 mm Body width: 2,550 mm Internal dimensions: Internal length: 7,040 mm Internal width: 2,480 mm Unladen weight: 2,590 kg Gross vehicle weight rating: 16,000 kg Internal height: 2,200 mm with sliding roof included External height: 2,450 mm (corner height 2,450 mm = C 00) Side loading height: 2,120 mm Rear loading height: 2,165 mm Forklift pockets at the rear in the floor frame Reinforced zinc tubing version for mounting a truck-mounted forklift. Bracket for chain securing required on the body. --> Reinforced central tunnel variant restricts some functions. Designed for continuous operation! Floor frame: High-quality galvanized steel construction, height 215 mm, four ISO container corners on 20' basis, four gripper edges in accordance with EN 284, wheel recess 120 mm. Flooring of swap body: Multi-bonded laminated floor, approximately 25 mm thick, drivable with forklift, suitable for axle loads up to 5,460 kg Support legs: fixed, parking height 1,320 mm, galvanized version 15 pairs of lashing rings. Distribution: From front wall stanchion to center, first pair of lashing rings approx. 400 mm, then evenly distributed rest of the lashing rings Lashing rings, 1 pair, mounted on the inside stanchion of the bulkhead at 1,000 mm above floor level Pallet stop edge, one-sided, 30 mm high, on left in direction of travel, standard tarp side. Lashing options via elongated holes (approx. 15 x 30 mm), distance between holes approx. 200 mm. Clearance height is reduced by 30 mm. Front wall: smooth, bolted steel front wall, full height with cassette construction (cassettes galvanized) Plywood panel on inside of front wall, 1,500 mm high, 12 mm thick Front wall inside fitted with impact protection, 300 mm high galvanized steel sheet Rear portal: double-leaf doors, smooth sandwich design, 4 internal locking bars, 4 hinges per door leaf. Left side wall sliding curtain per DIN EN 12641-2: Quality 890 g/m², webbing grid 500 x 600 mm, tear strength vertical 24 kN, horizontal 13 kN. Stainless-steel buckle with pressure lock. 1 center stanchion, symmetrically positioned (left in direction of travel) Each stanchion with 3 rows of slat pockets and 1 row of collection pockets (about 600 mm high) on the floor 8 aluminum insert slats, left in direction of travel, approx. 100 mm high Wecon RAPIDO RIGHT: vertical steel profiles attached to the side curtain, guided in upper and lower tracks via rollers. - Vertical curtain tensioners omitted - Center stanchions omitted - Horizontal insert slats omitted Fixed tarpaulin roof as standard sliding roof, only locked in place. Cover with parallel tracks, distance between tracks approx. 2,370 mm, distance from bottom edge of rail to bottom edge of bow approx. 90 mm Coating: Floor frame and support legs hot-dip galvanized, superstructure parts dip-primed and powder-coated in common RAL color, Roof tarp: RAL 9010 (pure white) Side curtain: RAL 9010 (pure white) Front wall: RAL 9010 (pure white) Rear portal: RAL 9010 (pure white) TÜV Certificate Code XL included The certificate confirms the load securing effect provided by the body structure. In line with requirements according to VDI 2700, EN 283, EN 12195 Part 1-2000, ADR and E.

Stanje: rabljeno, skupna masa: 16.000 kg, največja dovoljena obremenitev: 13.140 kg, lastna masa: 2.860 kg, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 7.300 mm, višina nakladalnega prostora: 2.470 mm, obratovalna teža: 2.860 kg, 7.45 BDF steel smooth-wall swap body with roller shutter door, multiple units available. External height: 2.75 m Internal dimensions approx. (L x W x H): 7.30 m x 2.48 m x 2.47 m, standard coupling height. Neutralized (no branding). Custom painting available upon request (additional cost). Loading included in the purchase price; delivery possible at extra charge. Knjdpfxot Dki Ij Ab Ujf Please enquire about delivery costs by providing the destination postal code via email.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, barva: bela, 7.82 BDF Krone smooth-sided swap body, used (Multiple units available) Color: White Support height: 1120 mm The swap body is watertight, and the roller shutter door operates smoothly. External dimensions (approx., mm): Length 7820, Width 2550, Height 2925 Internal dimensions (approx., mm): Length 7700, Width 2480, Height 2700 Door openings (mm): Width 2370, Height 2530 Lashing: Keyhole slotted Maximum permissible gross weight for approval/operation: 16,000 kg Intermodal suitable, incl. railway codification according to DIN EN 13044 Railway approval Code XL (for rail transport over 120 km/h) Floor frame: 195 mm high substructure including floor; rectangular tube longitudinal beams with cross members and outer frame as a welded assembly, with bottom-mounted guide tunnel 4 container corner castings, 20' basis, symmetrical overhangs 4 grab bar strips 7 pairs of lashing rings mounted laterally in rubbing strip Floor: Type: BO WST 27 mm thick, water-resistant bonded phenolic plywood floor, strength per DIN EN 283; suitable for floor loads up to max. 5,460 kg forklift axle load 2 ventilation openings at the front end in the floor (per GGVS) Box structure: Construction type: AB WST Internal height: 2700 mm Portal opening height (internal): 2525 mm Knjdpfxsvxbfmo Ab Uef Total height: 2925 mm Corner height: 2900 mm Closed superstructure Side walls: smooth, made of galvanized steel cassette panels Roof: trapezoidal-profiled steel sheet, construction height: 25 mm 2 ventilators per side wall Rubbing strip and side wall with cutouts Interior anti-collision guard for forklift, three-sided, approx. 300 mm high Front wall: smooth, galvanized steel cassette panels Interior front wall: 21 mm phenolic plywood, 750 mm high, above that a continuous 12 mm plywood panel Exterior front wall: offset at top (optimized for curving) Rear wall: roller shutter (clear width 2370 mm), with DB Train Plus approval, rollers replaceable Flat steel anti-collision protection for roller shutter guide rails Side walls fully lined with keyhole perforated plates on the inside 13 steel guide rails recessed left and right for double-deck load beams 13 aluminum load beams for double-deck loading Horizontal steel anti-collision protection on the rear profile, left and right Note: Actual dimensions and specific details may vary slightly due to ongoing product improvements.

Stanje: rabljeno, prevoženi kilometri: 187.000 km, moč: 471 kW (640,38 KM), prva registracija: 05/2023, lastna masa: 8.227 kg, največja dovoljena obremenitev: 10.773 kg, skupna masa: 19.000 kg, velikost pnevmatike: -, konfiguracija osi: 4x2, zavore: zaviranje z motorjem, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, Leto izdelave: 2023, Oprema: ABS, airbag, klimatska naprava, računalnik na krovu, zapora diferenciala, ref: VO24-1576 We offer for sale a MAN TGX tractor unit—price on request. Additional information: - Aluminum rims - Full air suspension Kodpfjwpw Ttjx Ab Ujnf - Warranty options available - Manufacturer maintenance contract available Configuration: - Axle setup: 6x4 - Tandem axle with reinforced suspension for maximum towing capacity Engine: - D38, 15.2 liters, delivering 640 hp - Maximum torque of 3,000 Nm, guaranteeing impressive performance even under demanding conditions - Euro 6d emissions compliance Transmission: - MAN TipMatic automated gearbox with dedicated modes for heavy loads and challenging terrain - Intelligent gear management for optimal balance between power and fuel efficiency Cab: - GX, high-end XXL version for superior comfort - Interior: Wide bed with premium mattress, heated and ventilated ergonomic leather seats Technology: - Digital dashboard with touchscreen display - Intuitive controls via MAN SmartSelect system - Advanced connectivity and navigation systems On-board technologies: - MAN EfficientCruise predictive cruise control for fuel optimization - Emergency braking assist with obstacle detection - Lane keeping assist and traffic sign recognition system - Cameras and sensors for enhanced 360° visibility Safety & Comfort: - Advanced braking and stability systems (ABS, ESP, ASR) - Multi-zone automatic climate control for optimal comfort - Full LED lighting for maximum visibility, even at night Applications: - Ideal for heavy haulage, industrial assignments, and long-distance transport - Capable of reliably towing extremely heavy loads Contact us for further information. Transmission details:

Stanje: rabljeno, prevoženi kilometri: 341.943 km, moč: 471 kW (640,38 KM), prva registracija: 02/2017, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 07/2024, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, PerformanceLine equipment package!!! Lane-Guard System IV (LGS IV). Gearbox functionality: rocking mode and Efficient. Multifunction steering wheel adjustable in height and tilt, air-suspended and climate-controlled driver comfort seat with lumbar support and heating, air-suspended co-driver comfort seat with lumbar support, shoulder adjustment, and heating. Low-noise specification for Austria. Additional water heater with engine coolant preheating. Heated and electrically adjustable wide-angle rearview mirror, passenger-side reversing system with electric shunting aid. PerformanceLine equipment!!! MAN Media Truck Advanced radio 12V with 7" color display. Engine D3876LF09 – 640 HP / 471 kW EURO 6 SCR 3000 Nm C-R OBD-C, 2-cylinder air compressor 476 cc with Air Pressure Management (APM), MAN TipMatic® Profi transmission software (for road use). Aluminum fuel tanks: 490l right, 250l left, and 80l AdBlue. Fifth wheel coupling JOST JSK 42MK162-Z9J, mounting height 162 mm (incl. 22 mm plate) with long operating handle and integrated lubrication. Ksdpfxorhub Ds Ab Uonf

Stanje: rabljeno, Leto izdelave: 2023, barva: rdeča, skupna masa: 16.000 kg, največja dovoljena obremenitev: 12.880 kg, lastna masa: 3.120 kg, prostornina tovornega prostora: 50 m³, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 7.300 mm, višina nakladalnega prostora: 2.770 mm, prva registracija: 01/2023, skupna dolžina: 7.300 mm, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: registracija tovornjaka, Reference number for inquiries: 69311 Krone, swap body / container * Year of manufacture: 2023 * 7.45 m * Fixed roof * Load securing certificate DIN EN 12642 Code XL * Textile version * Rail-loadable – craneable * Other * Gross weight: 16,000 kg * Unladen weight: 3,120 kg * Payload: 12,880 kg * Permissible total weight: 16,000 kg * Internal dimensions: L=7,300 mm, W=2,480 mm, H=2,770 mm * Internal volume: 50 m³ * Corner fitting distance E=5,853 mm Kedpfxjwa Iafo Ab Uonf * Overhang dimension: 799 mm * Parking height: 1,120 mm * Pallet spaces: 18 * Krone swap body type 745 - damaged Disclaimer: Subject to change, prior sale and errors excepted. You will find more photos and videos on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Preparation of all (export) documentation * Arrangement of export / customs license plates * Vehicle preparation: new tarpaulins, signwriting, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer/transport of commercial vehicles Please ask our trained staff – we will be happy to advise you.

Stanje: rabljeno, barva: bela, skupna masa: 16.000 kg, lastna masa: 2.860 kg, prostornina tovornega prostora: 46,2 m³, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 7.300 mm, višina nakladalnega prostora: 2.550 mm, Swap body, smooth steel BDF system, 7,450 mm long, new paint in Premium Plus condition. Used steel smooth-sided swap body, BDF system, 7,450 mm length, rear with aluminum roller shutter door. Interior features keyhole system in the side walls. PREMIUM-PLUS refurbishment: - Premium 2K paint finish – high gloss – here in RAL 9010 white - Chassis sandblasted, primed, and repainted in body color - New roller door cables - New rubber seals on roller door - New support legs – fixed or telescopic - Body fully overhauled with new UVV inspection - Roof perimeter painted 40 cm, remaining area misted - Grey painted rubbing strip - New galvanized access ladder - New galvanized ventilated panels installed after painting - Full-length lower lateral contour marking - Rear corner contour markings All values provided are approximate in mm and kg. Knjdpfxjuzlxmo Ab Ujf Offer is subject to prior sale and changes without notice. Prices are net ex location D-59558 Lippstadt-Rixbeck. For more items, please visit . .

Stanje: rabljeno, največja dovoljena obremenitev: 13.200 kg, skupna masa: 16.000 kg, prva registracija: 04/2021, dolžina tovornega prostora: 7.040 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 38 m³, skupna širina: 2.550 mm, skupna višina: 2.450 mm, Leto izdelave: 2021, WECON Curtainsider Sliding Tarp Platform BDF Swap Body Duke Type WPR 715 SG Year of manufacture: 04/2021 German first owner! 4 units WPR 715 SG with the following features: WECON standard sliding curtain swap body Duke Type WPR 715 SG Exterior dimensions: Body length: 7,150 mm Body width: 2,550 mm Interior dimensions: Body length: 7,040 mm Body width: 2,480 mm Unladen weight: 2,590 kg Gross permissible weight: 16,000 kg Internal height: 2,200 mm with sliding roof included External height: 2,450 mm (corner height 2,450 mm = C 00) Side loading height: 2,120 mm Rear loading height: 2,165 mm Rear floor storage compartment integrated into chassis frame --> As a result, centering tunnel is reduced Ksdpfov Rtygsx Ab Ujnf Chassis frame: galvanised quality steel construction, frame height 215 mm, 4x container corner castings on 20' basis, 4 grab handles per EN 284, wheel well clearance 120 mm Floor covering on swap bodies: Multi-bonded laminated wood floor, approx. 25 mm thick, suitable for forklift use, maximum axle load of up to 5,460 kg Support legs fixed, standing height 1,320 mm, galvanised version 15 pairs of lashing rings. Allocation: From front bulkhead to center, 1st pair of lashing rings approx. 400mm, then even allocation of the remaining rings Lashing rings, 1 pair, installed on the inner side of the front stanchion, 1,000 mm from upper edge of floor One-sided pallet stop edge, 30 mm high, left in driving direction, normal curtain side. Lashing options via elongated holes (approx. 15 x 30 mm), spacing between holes approx. 200 mm. Pass-through height reduced by 30 mm. Front wall: smooth, bolted steel front wall, full height, cassette design (cassettes galvanised) Anti-slip phenolic plywood plate inside the front wall, 1,500 mm high, 12 mm thick Front wall inside with impact protection, consisting of 300 mm high galvanised steel sheet Rear portal: smooth double-wing sandwich doors, 4 internal locking rods, 4 hinges per door leaf. Left side wall: sliding curtain per DIN EN 12641-2, quality 890 g/m², strap grid 500 x 600 mm, tear resistance: vertical 24 kN, horizontal 13 kN. Stainless-steel belt buckle with pressure locking. 1 centre stanchion, symmetrical arrangement --> driving direction left Stanchions each with 3 rows of slat pockets included, plus one row of collection pockets (approx. 600 mm high) at floor level 8 aluminium slats, driving direction left, approx. 100 mm high Wecon RAPIDO RIGHT: vertical steel profiles attached to the side curtain, guided on top and bottom tracks with rollers. - Vertical curtain tensioners omitted - Centre stanchions omitted - Horizontal insert boards omitted Fixed tarpaulin roof, standard sliding roof version fixed only. Roof with parallel guide rails, gap between rails approx. 2,370 mm, distance bottom edge of rail to lower edge of roof bow approx. 90 mm Coating: chassis frame and support legs hot-dip galvanised, superstructure parts dip-primed and powder-coated in standard RAL colour, Roof tarpaulin: RAL 9010 (pure white) Side curtain: RAL 9010 (pure white) Front wall: RAL 9010 (pure white) Rear portal: RAL 9010 (pure white) TÜV Certificate Code XL included The certificate confirms the load securing capability of the body structure. Requirements per VDI 2700, EN 283, EN 12195 Part 1-2000, ADR and EN 12642 – Code XL are fulfilled. Accessories: steel bumper corners rear, rear access ladder, 2 door retainers A-plate (waste sign) affixed to rear door Condition in line with age and mileage.