Odprta prikolica

SCHMITZ CARGOBULL Krone WK 7.3 RSTG / Textil

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, barva: bela, 7.82 BDF Krone smooth-sided swap body, used (Multiple units available) Color: White Support height: 1120 mm The swap body is watertight, and the roller shutter door operates smoothly. External dimensions (approx., mm): Length 7820, Width 2550, Height 2925 Internal dimensions (approx., mm): Length 7700, Width 2480, Height 2700 Door openings (mm): Width 2370, Height 2530 Lashing: Keyhole slotted Maximum permissible gross weight for approval/operation: 16,000 kg Intermodal suitable, incl. railway codification according to DIN EN 13044 Railway approval Code XL (for rail transport over 120 km/h) Floor frame: 195 mm high substructure including floor; rectangular tube longitudinal beams with cross members and outer frame as a welded assembly, with bottom-mounted guide tunnel 4 container corner castings, 20' basis, symmetrical overhangs 4 grab bar strips 7 pairs of lashing rings mounted laterally in rubbing strip Floor: Type: BO WST 27 mm thick, water-resistant bonded phenolic plywood floor, strength per DIN EN 283; suitable for floor loads up to max. 5,460 kg forklift axle load 2 ventilation openings at the front end in the floor (per GGVS) Csdpfsvxbfmex Agtehc Box structure: Construction type: AB WST Internal height: 2700 mm Portal opening height (internal): 2525 mm Total height: 2925 mm Corner height: 2900 mm Closed superstructure Side walls: smooth, made of galvanized steel cassette panels Roof: trapezoidal-profiled steel sheet, construction height: 25 mm 2 ventilators per side wall Rubbing strip and side wall with cutouts Interior anti-collision guard for forklift, three-sided, approx. 300 mm high Front wall: smooth, galvanized steel cassette panels Interior front wall: 21 mm phenolic plywood, 750 mm high, above that a continuous 12 mm plywood panel Exterior front wall: offset at top (optimized for curving) Rear wall: roller shutter (clear width 2370 mm), with DB Train Plus approval, rollers replaceable Flat steel anti-collision protection for roller shutter guide rails Side walls fully lined with keyhole perforated plates on the inside 13 steel guide rails recessed left and right for double-deck load beams 13 aluminum load beams for double-deck loading Horizontal steel anti-collision protection on the rear profile, left and right Note: Actual dimensions and specific details may vary slightly due to ongoing product improvements.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 3.400 kg, 7.82 m BDF Krone Smooth-Side Swap Body, used (Multiple units available) The exterior of the swap body, including the roof, is painted in the customer’s choice of color (standard RAL shade). The subframe and parts of the support legs are not painted; these areas are not visible once placed on the ground. Parking height: 1320 mm Cedpfxevn Scno Agtshc The swap body is watertight and the roller shutter door operates smoothly. External dimensions (approx. in mm): Length 7820 / Width 2550 / Height 2750 Internal dimensions (approx. in mm): Length 7650 / Width 2480 / Height 2500 Door openings (in mm): Width 2370 / Height 2600 Lashing: Keyhole type Tare weight: 3000 kg Max payload: 13,000 kg Max gross weight: 16,000 kg Note: Actual dimensions and other specific details may vary slightly from the above specifications due to ongoing product improvements.

Stanje: rabljeno, barva: bela, skupna masa: 16.000 kg, lastna masa: 2.860 kg, prostornina tovornega prostora: 46,2 m³, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 7.300 mm, višina nakladalnega prostora: 2.550 mm, Swap body, smooth steel BDF system, 7,450 mm long, new paint in Premium Plus condition. Used steel smooth-sided swap body, BDF system, 7,450 mm length, rear with aluminum roller shutter door. Interior features keyhole system in the side walls. PREMIUM-PLUS refurbishment: - Premium 2K paint finish – high gloss – here in RAL 9010 white - Chassis sandblasted, primed, and repainted in body color - New roller door cables - New rubber seals on roller door - New support legs – fixed or telescopic - Body fully overhauled with new UVV inspection - Roof perimeter painted 40 cm, remaining area misted Cedpouzlxmjfx Agtehc - Grey painted rubbing strip - New galvanized access ladder - New galvanized ventilated panels installed after painting - Full-length lower lateral contour marking - Rear corner contour markings All values provided are approximate in mm and kg. Offer is subject to prior sale and changes without notice. Prices are net ex location D-59558 Lippstadt-Rixbeck. For more items, please visit . .

Stanje: rabljeno, največja dovoljena obremenitev: 13.200 kg, skupna masa: 16.000 kg, prva registracija: 06/2018, dolžina tovornega prostora: 7.040 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 38 m³, skupna širina: 2.550 mm, skupna višina: 2.450 mm, Leto izdelave: 2018, WECON Curtainsider SLIDING TARPAULIN FLATBED BDF Swap Body Model: Duke Type WPR 715 SG Year of Manufacture: 06/2018 German first ownership! 4 units WPR 715 SG with the following equipment: - WECON standard sliding curtain swap body, Duke type WPR 715 SG External dimensions: - Body length: 7,150 mm - Body width: 2,550 mm Internal dimensions: - Body length: 7,040 mm - Body width: 2,480 mm - Unladen weight: 2,590 kg - Gross permissible weight: 16,000 kg - Internal height: 2,200 mm with sliding roof included - External height: 2,450 mm (corner height 2,450 mm = C 00) - Side loading height: 2,120 mm - Rear loading height: 2,165 mm Rear forklift pockets integrated into the floor frame - Reinforced zinc pipes version suitable for carrying a truck-mounted forklift - Mounting bracket for chain securing required on the superstructure - Center tunnel usability limited by reinforced version - Designed for continuous operation Chassis: - Quality steel construction, galvanized, height 215 mm - 4x container corner castings on 20’ basis, 4 grabbing edges according to EN 284, wheel clearance 120 mm - Floor: multi-glued laminated hardwood, approx. 25 mm thick, drivable by forklift, suitable for axle loads up to 5,460 kg - Fixed support legs, drop-off height 1,320 mm, galvanized - 15 pairs of lashing rings. Layout: From VK STW to mid 1st pair of lashing rings approx. 400 mm, then evenly spaced - 1 pair of lashing rings mounted on the inside of the front stanchion, 1,000 mm above top edge of floor - One-sided 30 mm high pallet stop ledge on left in driving direction, standard tarpaulin side - Lashing points via elongated holes (approx. 15 x 30 mm), spacing approx. 200 mm - Loading height is reduced by 30 mm Front wall: - Smooth bolted steel front wall, full height cassette construction (cassettes galvanized) - Plywood panel on inside of front wall, 1,500 mm high, 12 mm thick - Internal front wall with collision guard consisting of 300 mm high galvanized steel sheet - Rear portal: double-wing smooth sandwich doors, 4 internal rotary bolt locks, 4 hinges per door leaf. Left side wall: - Sliding tarpaulin according to DIN EN 12641-2: quality 890 g/m², belt grid 500 x 600 mm, tensile strength vertical 24 kN, horizontal 13 kN. Stainless steel belt lock with pressure safety catch. - 1 center stanchion, arranged symmetrically (left side in driving direction) - Stanchions with 3 rows of slat pockets including and 1 row of collection pockets (approx. 600 mm high) at the bottom - 8 aluminium slats, approx. 100 mm high, on the left in the driving direction - Wecon RAPIDO RIGHT: vertical steel profiles attached to the side curtain guided on rollers in upper and lower rails - No vertical tarp tensioners - No center stanchions - No horizontal slats - Fixed tarpaulin roof, designed as standard sliding roof, fixed position only. Roof with parallel running rails, spacing between rails approx. 2,370 mm, distance from lower edge of rail to lower edge of roof bow approx. 90 mm Coating: - Chassis and support legs hot-dip galvanized, superstructure parts immersion primed and powder coated in standard RAL color - Roof tarpaulin: RAL 9010 (pure white) - Side tarpaulin: RAL 9010 (pure white) Chsdpfx Aev Rtx Ajgtjc - Front wall: RAL 9010 (pure white) - Rear portal: RAL 9010 (pure white) TÜV Certificate Code XL included The certificate confirms the cargo securing capacity of the body construction. Requirements according to VDI 2700, EN 283, EN 12195 part 1-2000, ADR and E

Stanje: rabljeno, Leto izdelave: 2013, barva: bela, skupna masa: 16.000 kg, največja dovoljena obremenitev: 15.999 kg, lastna masa: 1 kg, prostornina tovornega prostora: 50 m³, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 7.300 mm, višina nakladalnega prostora: 2.770 mm, prva registracija: 10/2013, skupna dolžina: 7.300 mm, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: registracija tovornjaka, Številka vozila za povpraševanja: 41820 Krone, izmenljiva platforma/kontejner * Letnik: 2013 * 7,45 * Fiksna streha * Potrdilo o varnosti pri razkladanju DIN EN 12642, koda XL * Rollo vrata * Izvedba s tekstilno prevleko * Dvojna nosilna konstrukcija * Podporna opora, teleskopska * Primerno za prevoz po železnici – primerno za dvig z dvigalom * Ostalo * Skupna teža: 16.000 kg * Prazna teža: 1 kg * Nosilnost: 15.999 kg * Dovoljena skupna teža: 16.000 kg Chodpjz Hum Hsfx Agtjc * Notranje mere: D=7300 mm, Š=2480 mm, V=2770 mm * Notranja prostornina*: 50 m3 * Mere vogalnih pritrdil E=5853 mm * Mere izreza 799 mm * Višina za odlaganje: 1120 mm * Število paletnih mest: 18 * Krone izmenljiva platforma 745 * Notranja višina 2770 mm * Tekstilna perforirana pločevina z zložljivimi mizicami Izjava o omejitvi odgovornosti: Pridržujemo si pravico do sprememb, predhodne prodaje in napak. Dodatne slike in videoposnetke najdete na naši spletni strani. Naša obsežna ponudba storitev vključuje, na primer: * Nakup/prodaja/najem gospodarskih vozil * Hitro in enostavno financiranje * Priprava vseh (izvoznih) dokumentov * Naročilo izvoznih registrskih tablic * Priprava vozila: nove ponjave, nalepke, barvanje itd. * Profesionalno natovarjanje/pritrditev tovora * Tehnični pregledi TÜV, storitve za odobritve * Prevoz gospodarskih vozil Za dodatne informacije se obrnite na naše usposobljeno osebje, ki vam bo z veseljem svetovalo.

Stanje: rabljeno, prevoženi kilometri: 1.001 km, prva registracija: 01/2006, lastna masa: 2.780 kg, največja dovoljena obremenitev: 13.220 kg, skupna masa: 16.000 kg, barva: bela, voznikova kabina: drugo, vrsta prenosa: drugo, dolžina tovornega prostora: 7.320 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 2.270 mm, Leto izdelave: 2006, Vehicle location: Bovenden, doors Chjdpfx Agou T Ihxetsc Body: Swap body with swing doors ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: rabljeno, prva registracija: 01/1999, skupna širina: 2.550 mm, Glavne značilnosti Notranja referenčna številka: 26139T Model vozila: 1999 WB, tovorno vozilo s kovinsko nadgradnjo in roletnimi vrati Znamka vozila: Drugo Kategorija izdelka: Menjalna platforma s kovinsko nadgradnjo Rabljen / Nov / Predstavitven vozilo: Rabljen Datum prve registracije: 15.01.1999 Teže in mere Cedpfxez Hpuls Agtjhc Širina vozila: 2550

Stanje: rabljeno, največja dovoljena obremenitev: 13.460 kg, skupna masa: 16.000 kg, prva registracija: 01/2012, dolžina tovornega prostora: 7.280 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.625 mm, prostornina tovornega prostora: 47 m³, skupna širina: 2.550 mm, skupna višina: 2.900 mm, Leto izdelave: 2012, Št. vozila G0123213_MUSTER – Proizvajalec: Krone. * Drsna ponjava na strehi Cjdoz A Rkmepfx Agtjhc * Konturirana oznaka bok/zadek * Certifikat za obremenjenost Code-XL * Portalna vrata z dvojnimi vrtljivimi zapahi (znotraj) * Stranska drsna ponjava * Dostopno z viličarjem * Teleskopske podporne noge * Pripravljeno za nakladanje na železnico * Možnosti za pritrditev tovora LASI KODA XL!!! Več kosov na voljo! Dobavni rok po dogovoru! Multi Lock zunanji okvir. Nova ponjava. Jeklene vstavne letve z vgrajeno kombinirano zatezno tirnico (reža/luknja). Tehnično pripravljen za uporabo brez dodatnih popravil. Delno prebarvano. Podvozje z znaki uporabe. UVV veljaven. Mere so okvirne. Ponudba je neobvezujoča, vmesna prodaja pridržana, cene neto iz lokacije D-59302 Oelde. Dodatni podatki po dogovoru po telefonu ali e-pošti:

Stanje: rabljeno, največja dovoljena obremenitev: 15.460 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2017, dolžina tovornega prostora: 7.330 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.540 mm, Leto izdelave: 2017, Oprema: ABS, * Kögel AW 18 * Flatbed with tarpaulin * BDF * Swap body * Body manufacturer: Kögel * Year of manufacture: 2010 * SAF axles Chsdpfxeyv Ugwj Agtsc * Disc brakes * Air suspension * Tires: see pictures * Permissible total weight: 18,000 kg * Unladen weight: 2,540 kg * Payload: 15,460 kg * Immediately available * Subject to prior sale and errors Do you have any questions? Please contact us for quick support, also directly via WhatsApp: We offer: Net purchase for companies within the EU with a valid VAT ID number, as well as for customers from non-EU countries. Leasing and financing options. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to the port. All prices listed on Kleinanzeigen are gross prices and already include the statutory VAT of 19%.