Nizki nakladalnik

Ozgul LW3 EU 1SS

Stanje: novo, Leto izdelave: 2024, Oprema: ABS, = Further Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Payload (kg): 45,700 Height of 5th Wheel (mm): 1,310 CONSTRUCTION Base Chassis: Heavy-duty, extra-durable, BOX-type chassis design. Fully welded S355 steel chassis. Outer frame made of UPE 240 profile. Chassis Welding: Submerged automatic arc welding. Superstructure Welding: Automated robot welding. Axle (Type): Özkoç Trax or Osman Koç Turkish brand, drum brakes, 3 x 12 ton axles Axle Lifting: 1st axle automatic lift Suspension (Type): Air suspension Steering Axles: 3rd axle self-steering King Pin (Type): 1-position, 1x coupling pin 2” (EU-approved), Çayırova brand Tires: 12+1 units, 245/70 R 17.5, Fulda or Pirelli or Goodyear brands Rims: 12+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brands Landing Gear: Mechanically operated on one side, two-speed, Gos brand Credpfxjxhgz Ij Ad Uoh Brake System: Wabco EBS (4S/3M) with RSS, EC-compliant, with ADR adaptation Brake Chamber: 1 axle with 2 emergency brake chambers 2 axles with 4 service brake chambers Electric System: 24V, 2x7 + 1x15 pin sockets, SAE standard with ADR adaptation, SABA brand • 2 x Rear stop lights • 4 x Side LED lights • 2 x White LED lights • 2 x Front LED lights • 2 x Registration plate lights • 2 x Rotating lights Floor: Above tyres and platform edging covered with chequered sheet and hardwood; the central surface is flat sheet steel Rear Loading Ramps: Hydraulically operated rear ramps with electric pump, cable remote push-button operation, rear ramp length 2,500 mm + 1,500 mm, width 900 mm. All ramps internally and externally sliding hydraulically. Short steel ramps behind the neck. Color: On request Paint Application: Sandblasting, chemical cleaning, HYZINC coating, epoxy primer and two coats of acrylic paint TECHNICAL SPECIFICATIONS Accessories: • 2 x 7 pcs heavy-duty lashing rings (outer frame, mushroom type) • 4 x Certified Expray mud flaps • 1 x Plastic water tank • 2 x Wheel chocks with holders • 2 x 7 Galvanized side extension brackets (250 mm + 250 mm) • 2 x Side protections, aluminium • 1 x Toolbox • 1 x Spare wheel carrier with 1 tyre (on gooseneck) • 2 x Manual support legs at the rear • 2 x Reflective tapes and reflector signs on rear and sides • 2 x Side extension reflectors • Steel front panel (height: 400 mm) • Aluminium side panels on gooseneck section (height: 400 mm) • 1 plate holder on rear ramps or bumper = Further Information = Unladen weight: 12,300 kg CE Marking: yes

Stanje: novo, Leto izdelave: 2024, Oprema: ABS, Further Options and Accessories - Electronic Braking System (EBS) - Lift axle - Spare wheel Notes MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Payload (kg): 45,700 Fifth Wheel Height (mm): 1,310 CONSTRUCTION Base Chassis: Heavy-duty and extra-durable BOX-type chassis, fully welded from S355 steel. The outer frame is a UPE 240 profile. Chassis Welding: Automatic submerged arc welding. Superstructure Welding: Automatic robotic welding. Axle (Type): Özkoç Trax or Osman Koç Turkish brands, drum brakes, 3 x 12 ton axles Axle Lifting: 1st axle automatic lifting Suspension (Type): Air suspension Steering Axles: 3rd axle self-steering King Pin (Type): Single position with 1x coupling pin 2” (EU approved), Çayırova Brand Tires: 12+1 pcs, 245/70 R 17.5, Fulda or Pirelli or Goodyear brand Rims: 12+1 pcs, 6.75 x 17.5 steel rims, Jantas or Ako brand Crsdpfsvg H Hfox Ad Ueh Landing Gear: Mechanically operated on one side, two-speed. Gos brand Brake System: Wabco EBS (4S/3M) with RSS compliant to EC Directive with ADR adaptation Brake Chamber: - 1 axle with 2 x emergency brake chambers - 2 axles with 4 x service brake chambers Electric System: - 24V, 2x7 + 1x15 pin sockets, compliant with SAE standards and ADR adaptation (SABA brand) • 2 x Rear Brake Lights • 4 x Side LED Lights • 2 x White LED Lights • 2 x Front LED Lights • 2 x License Plate Lights • 2 x Rotating Beacons Floor: Areas above tires and edges of the platform covered with chequered steel sheet and hardwood, center surface with flat sheet steel Rear Loading Ramps: Hydraulically operated rear ramps with electric pump, push-button remote control. Ramp length: 2500mm + 1500mm, width: 900mm. All ramps are fully sliding, internal and external hydraulic. Short steel ramps mounted behind the neck. Color: On request Paint Finish: Sandblasting, chemical cleaning, HYZINC coating, epoxy primer, and two layers of acrylic paint TECHNICAL SPECIFICATIONS Accessories: - 2 x 7 heavy-duty lashing rings (mounted on the outer frame, mushroom type) - 4 x Certified Expray mud flaps - 1 x Plastic water tank - 2 x Wheel chocks with holders - 2 x 7 galvanized side extension brackets (250mm + 250mm) - 2 x Side guards, aluminum - 1 x Toolbox - 1 x Spare wheel carrier with 1 tire (mounted on gooseneck) - 2 x Manual rear support legs - 2 x Reflective stripes and reflector signs at rear and sides - 2 x Side extension reflectors - Steel front panel (height: 400mm) - Aluminum side panels on gooseneck section (height: 400mm) - 1 license plate holder on rear ramps or bumper Further Information Unladen weight: 12,300 kg CE marking: yes

Stanje: novo, Leto izdelave: 2024, Oprema: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Lifting axle - Spare wheel = Remarks = MASSES & DIMENSIONS Gross Vehicle Weight (kg): 58,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 36,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 12,300 Loading Platform Height (mm): 920 Payload (kg): 45,700 Height of 5th Wheel (mm): 1,310 CONSTRUCTION Base Chassis Heavy-duty, extra-durable, BOX-type chassis, fully welded S355 steel chassis. The outer frame is made of UPE 240 profile steel. Chassis Welding: Automatic submerged arc welding. Superstructure Welding: Automatic robot welding. Axle (Type): Özkoç Trax or Osman Koç Turkish brand, drum brakes, 3 x 12 ton axles. Axle Lifting: 1st axle, automatic lifting. Suspension (Type): Air suspension. Steering Axle: 3rd axle, self-steering. King Pin (Type): 1 position with single coupling pin, 2" (EU approved), Çayırova brand. Tyres: 12+1 units, 245/70 R17.5, Fulda or Pirelli or Goodyear brand. Rims: 12+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand. Landing Gear: Mechanically operated from one side, two-speed, Gos brand. Brake System: Wabco EBS (4S/3M) with RSS, conforming to EC Directive, with ADR adaptation. Brake Chambers: - 1st axle: 2 emergency brake chambers. - 2nd axle: 4 service brake chambers. Electrical System: 24V, 2 x 7-pin + 1 x 15-pin sockets, per SAE standard, with ADR adaptation, SABA brand. • 2 x Rear stop lights • 4 x Side LED lights • 2 x White LED lights • 2 x Front LED lights • 2 x License plate lights • 2 x Rotating beacon lights Floor: Above the tyres and platform edges are covered with checker plate and hardwood, the central area is flat sheet steel. Rear Loading Ramps: Hydraulically operated rear ramps with electro-hydraulic pump; remote control via cable push-button. Rear ramps length: 2,500 mm + 1,500 mm, width: 900 mm, all ramps have internal and external hydraulic sliding. Short steel ramps behind the gooseneck. Crsdpfx Aovg Idxjd Ujh Colour: On request Paint Application: Sandblasted, chemically cleaned, HYZINC coated, epoxy coated, and finished with two coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories: • 2 rows of 7 heavy-duty, mushroom-type lashing rings mounted on the outer frame • 4 x Certified Expray mud flaps • 1 x Plastic water tank • 2 x Wheel chocks with holders • 2 x 7 galvanized side extension brackets (250 mm + 250 mm) • 2 x Side guards, aluminium • 1 x Toolbox • 1 x Spare wheel carrier with one tyre (on the gooseneck) • 2 x Rear manual support legs • 2 x Reflective tape and reflector sign at the rear and sides • 2 x Side extension reflectors • Steel front panel (height: 400 mm) • Aluminium side panels on gooseneck section (height: 400 mm) • 1 plaque holder on rear ramps or bumper = Further Information = Unladen weight: 12,300 kg CE Marking: Yes