Žerjav

KENNIS KRAAN/CRANE/GRUE/KRAN - KENNIS 14 TON/M

Stanje: rabljeno, največja dovoljena obremenitev: 23.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2013, naslednji pregled (TÜV): 01/2025, dolžina tovornega prostora: 19.100 mm, Oprema: ABS, Faymonville 3-Axle Multimax Low Loader F-S43-1AAF First registration: .23 Gross weight: 35,000 kg Technical permitted gross mass: 58,600 kg Unladen weight: 11,500 kg Payload: 23,500 kg SAF axles: 8,000 kg + 8,000 kg + 8,000 kg Max. capacity: 11,200 kg + 11,200 kg + 11,200 kg Kingpin load / fifth wheel load: 11,000 kg Length: 13,675 mm, extendable to 19,475 mm Width: 2,540 mm / Height: 3,270 mm Loading platform: 13,300 mm, extendable to 19,100 mm Wheelbase: 2,900 mm / 1,360 mm Tyres: 245/70R17.5 1st axle liftable / 3rd axle steerable TÜV valid until: Further information available upon request by email! No guarantee for the accuracy of information/errors excepted! Details provided online are non-binding descriptions and do not constitute warranted characteristics. The seller assumes no liability for errors, input mistakes and data transmission errors. Subject to change without notice. Gbsdpfx Asu Ry T Rjfzeg Permanent purchase and sale as well as trade-in and rental of crane and lifting vehicles as well as construction and heavy-duty vehicles.

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin Gbedpok Aht Ujfx Afzjg - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: rabljeno, največja dovoljena obremenitev: 34.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2009, naslednji pregled (TÜV): 07/2024, Oprema: ABS, Further questions are welcome via WhatsApp. Gbsdpfot E Eunex Afzsg

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of permanently integrated wheel wells in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel wells with 15 x 15 mm square climbing strips and lower width extensions - Between the 1st and 2nd axle, one pair of fixed wheel wells with cover, approx. 1,610 x 970 x 400 mm - Recess in both the incline and extending into the loading area for receiving the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) Gsdpfeup U Hzjx Afzobg - 5 pairs of outward-folding lashing rings (LC 5,000 daN) - 2 pairs of outward-folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading area for securing straps. (LC 2,000 daN) - Includes 3-piece removable galvanized covers over the wheel wells – max. point load 3.5 t / piece. Hydraulic Two-piece Steel Ramps: - A pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm with 48 mm thick hardwood overlay - Ramps with hydraulically operated folding sections (up/down), hydraulic lifting system, and hydraulic horizontal adjustment Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock barrier activated via reverse gear and manual control - Air suspension with raise/lower valve - Axle tools - Tyres 235/75 R 17.5 Accessories included: - 2" kingpin - One galvanized steel front wall approx. 400 mm high - One spare wheel with holder mounted in front of the front wall - Yellow-red air couplings on the galvanized connector strip at the front - 4 wheel chocks with holders on the front wall - Rear gooseneck receiver for ALU approach ramps - Galvanised, extendable width extensions, approx. 230 mm per side - Galvanized folding supports under rear incline of the loading area - Rear mounting bracket for rotating beacon at the trailer rear - White reflective tape as per EU regulations on sides, on extension, and rear (red) - Mounts for warning panels on both sides of the gooseneck and rear panel, incl. socket - One mudflap at the trailer rear - European reflective plates (red-yellow) at trailer rear - On the gooseneck, ALU plug-in side and rear walls approx. 2,440 x 400 mm - Rear galvanized removable stanchions (body length approx. 2,560 mm) - 2 pairs WADER container locks in the loading area for one 20 ft or 30 ft container - 3 pairs of stake pockets for plug-in stanchions 100 x 50 mm in loading area outer frame - Removable galvanized intermediate table with 1 pair WADER container locks - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame of loading area incline - Four extendable warning signs approx. 423 x 423 mm with position light, extendable by approx. 400 mm - Mounting for rotating beacon on warning panels - 80 km/h speed stickers at rear and on both sides - Load gauge for axle load determination including load chart - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) using hot finishing Available as an option: - Tool box on the gooseneck