Priklopnik sedeža z delovno ploščadjo

KÄSSBOHRER K.SFS M Mega Plattform Auflieger Sofort Verfügba

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, barva: bela, Leto izdelave: 2023, Oprema: ABS, New, disc brakes, 1st axle liftable, 3rd axle steering, flatbed body with 1,500 mm steel cab protector, 800 mm high aluminium side and rear panels, 4 pairs of 90 mm side holes for stanchions, 1 pair of front holes, 1 pair of rear holes, holes on cab protector for stanchions when not in use, 12 stanchions of 1,200 mm each, side load securing hooks, through toolbox for timber, PVC toolbox, spare wheel holder, ferry hooks, brake pad wear kit Kfsdpfxek Af Tlo Ab Uoa

Stanje: novo, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Delivery time: approx. 3-4 months after receipt of order! NEW VEHICLE Kässbohrer Platform Lightweight SPS 3 # Unladen weight: 6,100 kg # Fifth wheel load: 15,000 kg Kfedpfx Abeivw Dve Uja # BPW axles with disc brakes # 1st axle as lift axle # Jost landing gear 24t # Wabco 4S/2M EBS with RSS # 2 x 7-pin and 1 x 15-pin electrical connectors # 24V Aspöck lighting system # Tires: 6 x 385/65 R 22.5 premium brand # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Oversize transport equipment (4x galvanized oversize marker boards with LEDs + 1x rotating beacon) # Stainless steel toolbox mounted on the right in direction of travel # 6x2 Jost container locks, flush-mounted # Stake pocket holders mounted on front wall + 20 stakes (1500 mm) # 4 rows of stake pockets # 10 x 2 stake pockets in frame # 7 x 2 lashing rings 4t on platform # 108 tie-down points on outer frame, each 2t # Front wall with Code XL certificate! # Chassis KTL coated and painted RAL 3020 Traffic Red # Front wall RAL 3020 Traffic Red ----Subject to errors, changes, and prior sale! Location: KTH-Trailer GmbH in 47574 Goch / Germany

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Our complete range of vehicles with immediate and short-term availability can be found on our website. Extract from the specification. Full equipment list available on request. Kodpfeugqvfox Ab Usfa Chassis: * Welded construction using high-quality steel profiles with through cross members, designed for high point loads * Underrun nose width approx. 700 mm * Outer frame as UNP profile * Scuff plate approx. 8mm * Neck height at the front approx. 130 mm Towing Equipment * 2-inch kingpin Underrun Protection * Bolted version, compliant with EC regulations Side Impact Protection * According to EC, made from anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-sided operation on front right Axles * 3 x 9 t air suspension axle units * 22.5" disc brakes * Total stroke approx. 180 mm * Lifting and lowering device operated by rotary slide valve Braking System * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Non-interchangeable coupling heads permanently mounted on the front crossmember, without connecting line to the truck Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET120 * Brand of our choice * Tyre pressure monitoring (TPMS) via EBS CAN bus system Mudguards * According to EC Spare Wheel Carrier * Not included Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.0 t * Holes for lashing straps in the outer frame at approx. 400-600 mm intervals Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Inner cladding with phenolic resin plywood, approx. 9 mm, height approx. 1,250 mm Floor * Approx. 28 mm hardwood floor set into the outer frame using galvanized omega steel profiles Lighting System * According to EC, 24 volt, with multi-chamber lights * LED side marker lights * LED position lights, white, front * LED outline marker lights, rear * License plate lights * Lane marker lights, LED * 1x15- and 2x7-pin socket connectors on the front crossmember Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Holder for rotating beacon including rotating beacon * 2 rubber buffer stops at rear * Foldable and extendable access ladder at the rear right (without platform) * 1 open mesh box, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, located behind the axles Paintwork * Front wall: single RAL color of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + single RAL color of your choice * Side protection: aluminium anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Wheel rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in outer frame, evenly distributed * 4 rows of stanchion pockets transversely to loading area * 20 pieces of stanchions made of galvanized tube 80/50, total length approx. 1,200 mm * Magazine for 20 plug-in stanchions on inside of front wall * Container locks for 1 x 40’ and 2 x 20’ containers, flush with the rear * Container locks for 1 x 20’ container centered * Work light at lamp bracket (activated in reverse gear) * 2 stainless steel toolboxes, approx. 600x500x500 mm, 1 eac

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VAVJS1339PH522406, lastna masa: 8.520 kg, največja dovoljena obremenitev: 30.480 kg, skupna masa: 39.000 kg, prva registracija: 01/2024, dolžina tovornega prostora: 13.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5, barva: rumena, Leto izdelave: 2024, Oprema: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL FLATBED SEMI-TRAILER RH230 – forced-steered Two identical vehicles available – Optionally including Volvo FM 370 tractor unit (year 2018) Vehicle IDs: VAVJS1339PH522406 + VAVJS1339PH522408 Mileage 7,700 km - WEIGHTS Gross weight (technical): 39 t Axle assembly load (technical): 27 t Fifth-wheel load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Total width max. 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Fifth-wheel height unladen approx. 1,130 mm CHASSIS - Welded steel frame construction - Reinforced for 20 t center load over 4 m loading length - Frame height at front approx. 230 mm - 2" replaceable kingpin - Frame for unladen fifth-wheel height approx. 1,120 mm – approx. 1,200 mm with air-suspended tractor unit - 4 mm perforated outer frame, hole center distance approx. 100 mm, slotted holes 50/30 mm, for lashing 3.5 t per lashing point - 10 pairs of 5 t lashing rings, recessed and foldable, can also be folded outward - 8 pairs of square tube inserts with plug-in housings for stake pockets 80x80 mm, on both sides of the outer frame - 6 square tube inserts with plug-in housings for stake pockets 80x80 mm, crosswise over entire width, max. tensile load 2000 daN AXLES - BPW EcoDisc axles with disc brakes, diameter 430 mm (22.5" disc) - Load capacity 9 t/axle, on-road version - 1st axle rigid - 2nd and 3rd axles with bogie assembly for forced steering STEERING Kedpfx Aexq S H Isb Usfa - Tridec TR forced steering on two turntable-steered axles, designed for heavy duty - Self-actuating forced steering, front saddle turntable with steering wedge - Transmission via two steering rods, rear axle mount with bogie assembly - Central lubrication points for steering at the front saddle turntable and rear on the bogie - Axle lift on 1st axle, automatically raises/lowers depending on weight, speed-limited start assist BRAKING SYSTEM / SUSPENSION - EBS system 2S2M, one axle with sensor - RSS/RSP – stability program - Spring-actuated parking brake on 2 axles - Aluminum air tanks - Brake/air connectors with Quattromatic quick coupling - EBS/ABS socket at front - Air suspension with lift and lowering device, total stroke approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load indicator via EBS CAN-bus signal for display in the driver’s cab - Wabco SmartBoard for data readout via display (mileage, axle assembly load, brake diagnostics, etc.) FLOOR - 27 mm phenolic plywood floor with steel hat-profile rails above the longitudinal beams - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminum forklift protection rail bolted on both sides of the outer frame - Aluminum forklift protection rail rear crosswise - Enclosed SPECIAL steel toolbox by Schoch, black coated, approx. 3,340 mm long, approx. 2,480 mm wide, approx. 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides - Galvanized steel toolbox / single-color painted lid - 8 detachable hardwood cross beams approx. 100/100 mm, with steel edging, fixable in plug-in housings in the outer frame Very good condition, German registration certificates, immediately available.

Stanje: novo, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 1.300 mm, Oprema: ABS, NEW VEHICLE Kässbohrer Extendable Platform Trailer SPA X3 Delivery time: Approx. 4 months after receipt of order! # Kingpin load: 18,000 kg # Fifth wheel height: 1,150 mm # Extendable by 3,500 mm Axles / Brake system: # BPW axles with 22.5" disc brakes # 3rd axle is self-steering # 1st axle is a lift axle # WABCO braking system 4S/3M # 6 x branded tires 385/65 R22.5" on steel rims # Jost landing legs 24t # Electrical connections: 2 x 7-pin and 1 x 15-pin # 24V Aspöck lighting system # 2 plastic wheel chocks Equipment: # Non-detachable sliding table, 300 mm long # 30 mm hardwood floor # Oversize transport kit (4x galvanized LED marker boards + 1 rotating beacon) # Stainless steel toolbox 1,000 x 500 x 500 mm, mounted right-hand side in driving direction # 6x2 retractable container locks # Stake holders mounted under chassis + 18 stakes, 100 x 50 mm # 6 rows of stake pockets # 10 x 2 stake pockets in the frame # 7 x 2 lashing rings (13.4t), 8 x 2 lashing rings (8t), 108 external lashing points (2t each) # Front wall 1,500 mm high with Code XL certificate! # Chassis KTL-coated and painted RAL 3020 traffic red Kedjrvf Dkepfx Ab Usfa # Front wall RAL 3020 traffic red ----Errors, omissions and prior sale excepted! Location: KTH-Trailer GmbH in Goch

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm Kedpfx Aewvzg Rsb Uefa * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)

Stanje: novo, največja dovoljena obremenitev: 98.290 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.750 mm, Oprema: ABS, Our complete stock of vehicles, including immediately and soon-available models, can be found on our website. Extract from the equipment features. Full specification available on request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm * 2 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings at the center of the gooseneck (LC 10,600 daN) * Suitable for tractor units: 6 x 4 or 8 x 4 2-Axle Front Bogie: * Pin-and-eye coupling front and rear. Length: approx. 2,970 mm * Bogie width: approx. 2,750 mm * 1 pair of external frame lashing rings (LC 10,000 daN) * 2 pairs of central beam lashing rings (LC 10,000 daN) Loading Platform: * 6-axle extendable loading platform with pin-and-eye coupling at front and rear bevel approx. 500 mm x 8°, length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * 7 pairs of lashing rings along the central beam (LC 10,000 daN) Pendulum Axle 2-Axle Front Bogie: * PENDULUM AXLE, all axles hydro-mechanically forcibly steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinder with shutoff valves and locking pins for securing in lifted position * Axle load technical: up to 13,740 kg (30 km/h) * Hydraulic axle balance Kjdpfx Ajxn E I Hsb Uefa Pendulum Axle 6-Axle Loading Platform: * PENDULUM AXLE, all axles hydro-mechanically forcibly steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinder with shutoff valves and locking pins for securing in lifted position * Axle load technical: up to 13,740 kg (30 km/h) * Hydraulic axle balance Tyres: * 24 x brand at our discretion (M+S) 245/70 R17.5 load index 143/141L (146/146F) Paintwork: * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection * Final painting with two layers of 2K top coat, single-colour in RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) Options included: * Truck hydraulic connection with flow regulator (20 l/min), incl. support arm for supply lines, tractor unit tank must be minimum 80 L * With MAX Trailer coupling parts, otherwise customer to supply coupling parts ex works * 3.5-inch kingpin * Steel front bulkhead approx. 400 mm high * Removable ALU side panels and tailgate on gooseneck, approx. 400 mm high, anodized finish * Socket for cable remote control operation of rear steering at gooseneck, with pushbutton controls and axle tracking indicator (without installation on tractor unit) * Control lever at gooseneck protected by foldable cover * Gooseneck operation illuminated with on/off switch * BEKA-MAX centralized lubrication for one gooseneck with normal grease NLGI-2 * Hydraulic couplings from gooseneck to low bed with screw couplings * BEKA-MAX centralized lubrication for 2-axle bogie with normal grease NLGI-2 * Stake pocket rails transversely mounted in loading floor for stakes approx. 100 x 50 mm * Bogie surface with integrated sand coating for anti-slip protection * Hydraulic coupling pin * BEKA-MAX centralized lubrication for loading platform with normal grease NLGI-2 * Loading platform surface with integrated sand coating for anti-slip protection * 9 pairs of stake pockets for stakes approx. 1

Stanje: rabljeno, največja dovoljena obremenitev: 37.535 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: * Extendable loading platform with pneumatically actuated locking mechanism Ksdpfx Abjxgk U Ns Usfa * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Follow-up steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Braking System: * Braking system compliant with EU regulations with EBS-E (2S2M) without interconnecting lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and long-lasting corrosion protection for the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-colour top coat finish in RAL 3002 carmine red * Silver rims * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings at the galvanised front connection panel * 4 wheel chocks with holders * 2-inch kingpin * Yellow reflector tape according to EU regulations, at the sides, on the extension, and rear of trailer * European reflector plates (red-yellow) at the rear of the trailer * Loading platform equipped with approx. 30 mm thick wooden floor, enclosed in omega profiles * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted to the inside of the front wall * 1 spare wheel holder under the loading platform, left side in the direction of travel, without spare wheel * 1 mudflap at the rear of the trailer * Manual and description on USB stick * One bracket for a warning beacon at the rear of the trailer * On the gooseneck and rear panel, each left and right, a bracket for warning boards including socket * 80 km/h speed label at rear and on both sides * Load manometer for axle load determination including load diagram * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the loading floor, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * Stainless steel toolbox, approx. 600 x 350 x 600 mm, under the loading platform, left side in direction of travel * 4 pairs of stake pocket rails mounted lengthwise on the loading platform, for plug-in stakes 80 x 50 mm * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading status * 2 LED reverse lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation)

Stanje: novo, največja dovoljena obremenitev: 32.340 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and soon available vehicles on our website. Excerpt from the equipment. Full specification on request. Chassis: * Welded construction made from high-quality steel profiles with punched profile cross-members, designed for high point loads Towing device: * 2-inch king pin Landing legs: * 2 x 12 t landing legs with compensating foot and one-sided operation on the right in driving direction Axles: * 3 x 9 t air suspension axle units * Disc brakes * Manufacturer: SAF, with disc brakes approx. 430 x 45 mm * ABS * Centrally aligned wheel studs, 10-hole with ET 120 * Total air suspension travel approx. 200 mm, of which raise approx. 140 mm and lower approx. 60 mm, controlled by rotary slide valve with detent function Brake system: * Two-line compressed air brake system according to EU regulations with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Non-interchangeable coupling heads securely mounted to the front cross-member, without connecting line to the tractor unit Tyres: * 6-x 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, manufacturer of our choice Mudguards: * According to EU regulations, ? PVC mudguards in front of and behind the axle units Spare wheel carrier: * 1 piece double basket with mounting material for one spare wheel with ET 120 Load securing: * 9 pairs of folding lashing rings, evenly distributed, traction approx. 8.0 t * 8 pairs of folding lashing rings, evenly distributed, traction approx. 2.5 t * In the outer frame approx. every 500 mm a hole for tie-down straps Front wall: * Reinforced steel structure, fixed * Interior lined with approx. 9 mm phenolic-coated plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame Lighting system: * According to EU regulations, 24 Volt, with multi-chamber lights * LED side marker lights Kfedpfxowx Db As Ab Usa * LED position lights white front * LED contour lights rear * Licence plate lights * 1x 15- and 2x 7-pin sockets at the front cross-member Equipment: * ECE 70 warning plate * Bracket for rotating beacon (without beacon) Painting: * Chassis and front wall sandblasted, primed, and painted in one colour * Chassis: RAL 3002 carmine red * Dropsides: anodised * Dropside stanchions: RAL 3002 carmine red * SSV: Aluminium anodised * Hubs: Cataphoretic dip primed (KTL) * Rear underrun guard: white (RAL 9010) * Mounted parts: galvanised/KTL black * Rims: silver Accessories: * First axle liftable, with fully-automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly spaced * 4 rows of stanchion pockets across the loading platform * 20 stanchions made of galvanised tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions inside front wall * Dropsides: 5 x 250 mm aluminium hollow profile dropsides and rear wall, anodised, foldable and removable, detachable Kinnegrip stanchions * Dropside and stanchion magazine: left and right under chassis slide-in rails for dropsides and stanchions * Container locks for 1 x 40? and 2 x 20? containers rear flush, container locks for 1 x 20? container in the middle * Worklight at lamp bracket * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm * Air suspension Safety: ABS * EBS * Disc brakes Extras: Rental possible

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website. Extract from the equipment. Complete equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads * Underrun beam approx. 700 mm wide * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm * Neck height at the front approx. 130 mm Coupling Equipment * 2-inch king pin Underrun Protection * Bolted version according to EC regulations Side Impact Protection * According to EC regulations, made from anodised aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR) Axles * 3 x 9 t air suspension axles with disc brakes, 22.5" * Total lift approx. 180 mm * Lifting and lowering device via rotary valve Brake System * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Mudguards * According to EC regulations Spare Wheel Carrier None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t * In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles Lighting System * According to EC regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED outline lights rear * Licence plate lights * Lane marker lights, LED * 1x15- and 2x7-pin plug sockets at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning signs * Bracket for rotating beacon, incl. rotating beacon * 2 rear rubber buffer stops * Access ladder rear right, foldable and extendable (without platform) Kfedpfx Abow U H Sbe Usa * 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: single-colour RAL as per request * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single-colour RAL as per request * Centre stanchions: single-colour RAL as per request * Side underrun protection: aluminium, anodised * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised/KTL black * Rims: silver Contour Marking * Complete, yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm * Internal magazine for 20 plug-in stanchions on the front wall * 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion