Prikolica z nizko platformo

MÜLLER-MITTELTAL T3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp

Stanje: novo, skupna masa: 30.000 kg, največja dovoljena obremenitev: 23.830 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning signs front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash protection * Reflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable revolving beacon at the rear * Drawbar with 40 mm towing eye, height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included) with additional lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant drop-down and swiveling lashing rings, loadable in all directions and recessed into the outer frame – load capacity in corners 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3-meter total width (not in the rear taper) * Widening planks stored in the center of the loading area * Excavator arm trough above rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides in the excavator trough) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm Kdjdjl Thxdjpfx Ab Tou * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --technically permissible total weight 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from CW 38/2025

Stanje: novo, skupna masa: 30.000 kg, največja dovoljena obremenitev: 23.830 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic suspension * Mechanical rear axle equalizer * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign panels front and rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel skirts, each with spray protection * Side and rear contour marking tape (reflective) * Flip-top lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle Ksdpfx Abol Th Ado Tedu * 15-pin electrical connector * 4 stake pockets per side (stakes not included), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV folding and lowering lashing rings, loadable in all directions and recessed in the outer frame – corners rated at 13.4 t, otherwise 10 t * 6 pairs mechanical folding outriggers for 3 m overall width (not included on the rear slope) * Widening boards stored in the center of the load area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the excavator arm rest) * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), laterally adjustable * Load area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach ramp) * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Technically possible gross vehicle weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from CW 38/2025