Schwarzmüller G Prikolice nakup rabljenega (290)

Stanje: rabljeno, največja dovoljena obremenitev: 31.050 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2016, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, skupna višina: 3.650 mm, Oprema: ABS, * Schwarzmüller 4-osni nizkopodni priklopnik z dvojnimi hidravličnimi zložljivimi rampami - visoko priklopljen s 50 mm obročem * Zračno vzmetenje - BPW osi - kolutne zavore - pnevmatike: 245/70R17,5 Cedpfx Aisy Dy Eneperc * Skupna dolžina: 11.900 mm - širina: 2.500 mm (možno do 3.000 mm) - višina: 3.650 mm * Dovoljena skupna masa: 40.000 kg - lastna masa: 8.950 kg - nosilnost: 31.050 kg * Nemško vozilo - nemški prometni list - takoj na voljo - iz prve roke * Leva zadnja hidravlična podporna noga potrebuje popravilo * Za ogled prosimo, da se dogovorite za termin * Kontaktna oseba: gospod Andreas Vogel * Podatki na internetu so nezavezujoči opisi. * Ne predstavljajo zagotovljenih lastnosti. * Prodajalec ne odgovarja za tipkarske ali prenosne napake podatkov. * Pridržujemo si pravico do sprememb, napak in predhodne prodaje.

Stanje: rabljeno, lastna masa: 3.660 kg, največja dovoljena obremenitev: 14.340 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2012, naslednji pregled (TÜV): 12/2025, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, ABS (anti-lock braking system), container locks, underrun protection, side aluminum side guards, twin tires, storage box Cjdpjvy Uz Rofx Aiporc Body: 2-axle roll-off trailer for transporting containers up to 7m, 2x 9t BPW axles, drum brakes! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Stanje: novo, največja dovoljena obremenitev: 32.630 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 57 m³, skupna širina: 2.550 mm, skupna višina: 3.800 mm, Leto izdelave: 2026, Oprema: ABS, SCHWARZMÜLLER 3-Axle GRAIN Tipping Trailer 57m³ 6370kg!! NEW VEHICLE!! Cargo Bulk material, pallet and grain transport Weights Gross weight (technical): 39 t Axle load (technical): 27 t Fifth wheel load (technical): 12 t Unladen weight: 6370kg Dimensions Internal length: approx. 10,500 mm Internal width: approx. 2,470 mm Internal height: approx. 2,200 mm Loading volume: approx. 57 m³ Overall height unladen: approx. 3,800 mm Chassis Steel frame welded construction with rear tipping shaft, low superstructure height (frame height approx. 280 mm) 2" kingpin Frame for coupling height approx. 1,170 mm - 1,250 mm Mechanical steel landing legs, 2 x 12 t, single-sided operation (right-hand side), thrust compensation Axles SAF Intradisc-B9 axles with disc brakes ø430 mm (22.5" disc), axle load 9 t/axle, on-road configuration Axle spacing: 1,310 + 1,310 mm Front axle liftable automatically (raises/lowers depending on weight), additional forced lowering including integrated start assist switch in driver’s cab + operation '3 x brake', socket: PIN 12 Wheels 6 tires 385/65 R 22.5, 160K 6 x aluminium rims 11.75 x 22.5, offset 120 mm, polished, brand per factory choice Brake System/Suspension Brake system per EU directive 71/320 ECE R13, twin-line compressed air brake Knorr brand brake system EBS system 2S2M RSS - Stability control program Spring-loaded parking brake Aluminium air tanks Brake/air connectors: 2 coupling heads EBS/ABS socket at front Electronic air suspension with automatic lowering, inductive switch + lowering lock rotary switch, plus with lift/lower function, cab operation via CAN bus signal + display (TIM) on the trailer Assistance/Safety Systems Axle load indicator via EBS CAN bus signal for display in cab TIM - Trailer Information Module by Knorr, display on chassis SWIT - Schwarzmüller Intelligent Telematics, "BASIC" package Tire pressure monitoring per ECE regulation 141, pressure sensors in wheels Tipping body Aluminium corner body in pallet version = smooth inside and outside, upright front and rear walls Front wall 4 mm with reinforcements Access steps inside tipping body Side walls with hollow profiles 30/3/2 mm and upper stabilizing frame Rear crossbeam = pivoting door stop bar incl. control rod Uniform fixed bearing over front wall and rear crossbeam Crjdjyv S Nispfx Aipec Floor plate 8 mm with close cross-ribbing Side walls welded tight inside Combination rear wall 4 mm = double doors, divided in the middle with rubber seal, 1 external stainless steel rotary latch and holder for open doors, also with pendulum frame with rubber seal Automatic-mechanical 4-hook central locking incl. closing option for sliding discharge One grain slider approx. 400/400 mm per door leaf with side metering lever and splash guard Slider plate stainless steel, unpainted Additional joint, free swinging Tension screws for additional security Hydraulics 1-pipe system with fixed-side screw coupling HDK BG6 High-pressure front ram for rear tipping, tipping angle approx. 48° Tarpaulin Plastic rolling tarp incl. aluminium slat, hand crank + bracket on standing platform Integrated tube in center of tarp ø 60 mm with keder fastening to upper belt (without customs seal) 3 stop brackets and locking for rolled tarp Front and rear with tarp hooks and zigzag lacing 4 pieces of removable or swiveling crossbars

Stanje: rabljeno, lastna masa: 6.580 kg, največja dovoljena obremenitev: 27.420 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2011, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, | Schwarzmüller plato priklopnik | BPW osi z disk zavorami | Letnik 2011 | Nosilec rezervnega kolesa | Škatla za orodje | Pnevmatske gume: 385/65 R22,5 | Pridržujemo si pravico do napak in predhodne prodaje. Cedpfx Aox Uqxmeiporc

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2021, Oprema: ABS, Fahrzeug-Ident-Nr.: VAVKSK339MD477262 RAHMEN STAHL - MULDE ALU mit Blechboden = Eigengewicht: 5.620 kg automatisches Verdeck - Marcolin DE HU fällig - SP 07.2026 Muldenmaße: 7.600 x 2.330 x 1.650 mm Volumen: ca. 28 m³ SAF Achsen mit TROMMELBREMSEN 2 x LIFTACHSE = ACHSE 1 + 3 = LIFTACHSE WabcoSmartControl Stutzfüße kurbelbar - ALU Pendelklappe außenliegend mit Schieber Unterfahrschutz verstellbar Bereifung: 385/65 R 22,5 Alu-Räder Änderungen, Zwischenverkauf und Irrtümer sind ausdrücklich vorbehalten. Die Beschreibung dient der allgemeinen Identifizierung des Fahrzeuges und stellt keine Gewährleistung im kaufrechtlichen Sinne dar. Ausschlaggebend ist die Beschreibung gemäß Kaufvertrag. Crodpfex Ntvwex Aipsc Unser Angebot ist generell ohne neue TÜV-Abnahme. Falls neue TÜV-Abnahme erwünscht, unterbreiten wir Ihnen gerne ein Angebot unserer Partnerwerkstätten! Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. Es gelten unsere allgemeinen Liefer- und Zahlungsbedingungen.

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2021, Oprema: ABS, Fahrzeug-Ident-Nr.: VAVKSK339MD477258 RAHMEN STAHL - MULDE ALU mit Blechboden = Eigengewicht: 5.620 kg automatisches Verdeck - Marcolin DE HU fällig - SP 04.2026 Muldenmaße: 7.600 x 2.330 x 1.650 mm Volumen: ca. 28 m³ SAF Achsen mit TROMMELBREMSEN 2 x LIFTACHSE = ACHSE 1 + 3 = LIFTACHSE WabcoSmartControl Stutzfüße kurbelbar - ALU Pendelklappe außenliegend mit Schieber Unterfahrschutz verstellbar Bereifung: 385/65 R 22,5 Alu-Räder Cjdpfxsx Hb Sbj Aiporc Änderungen, Zwischenverkauf und Irrtümer sind ausdrücklich vorbehalten. Die Beschreibung dient der allgemeinen Identifizierung des Fahrzeuges und stellt keine Gewährleistung im kaufrechtlichen Sinne dar. Ausschlaggebend ist die Beschreibung gemäß Kaufvertrag. Unser Angebot ist generell ohne neue TÜV-Abnahme. Falls neue TÜV-Abnahme erwünscht, unterbreiten wir Ihnen gerne ein Angebot unserer Partnerwerkstätten! Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. Es gelten unsere allgemeinen Liefer- und Zahlungsbedingungen.

Stanje: rabljeno, lastna masa: 5.520 kg, največja dovoljena obremenitev: 32.480 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2017, naslednji pregled (TÜV): 08/2025, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, | Schwarzmüller 3-osna prikolica za les | SAF osi z disk zavorami | Lastna teža: 5520 kg | Nosilnost: 32480 kg | Dvigljiva os | Pnevmatike: 385/65 R22,5 | 10 parov stebrov | Pridržujemo si pravico do napak, vnosnih napak in predhodne prodaje. Crodpfox S N Ubsx Aipoc

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2025, Oprema: ABS, Ongoing no. 12100 ALUMINIUM TIPPER SCHWARZMÜLLER 25m³ 3-axle K-SERIES / ALUMINIUM TIPPER / STEEL LINING 5430 kg Brand/Manufacturer: SCHWARZMÜLLER Initial registration: BRAND NEW VEHICLE Dimensions: 7650 x 2330 x 1470 mm Volume: 25 cbm Permissible total weight: 36,000 kg Unladen weight: 5,370 kg Fifth wheel load: 12,000 kg Air suspension lift/lower function Disc brakes ABS EBS Mileage: 0 km Axle make: SAF HD 430 Lifting axle Superstructure paint: RAL 7001 silver Chassis paint: novagrau tyres: 6 units Tyre condition: 100% Rear axle tyres: 385/65 R 22.5 Aluminum tipper + steel lining Body in 6 mm aluminium + 3 mm continuous wear plate inside to the front With OVERHANGING TAILGATE IDEAL FOR SAND / GRAVEL / EXCAVATED EARTH!!!! SAF 430 mm disc / LIFTING AXLE automatic lowering when tipping high-pressure cylinder at the front fifth wheel height: 1200 mm Fixed supports / aluminium tank LIFTING AXLE Credpfev Hut Tex Aipjc Frame steel / body aluminium !!!!! New version !!!!! All information provided without guarantee, subject to prior sale!! If you have any questions regarding this or other vehicles, please do not hesitate to contact us. If you have any questions for this or any other trailer/car, please call us.

Stanje: rabljeno, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2011, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, Schwarzmüller AZ gradbeni kesonski priklopnik s stranicami Crsdpfx Aowyq Ifsipec Int. št. za povpraševanja: 0725528 * Proizvajalec nadgradnje: Schwarzmüller * Tip: AZ * ABS * 2 osi z zračno vzmetenjem * Aluminijasta zaščita pred naletom * Kolutne zavore * Stranice Notranje mere: * Dolžina: 7.000 mm * Širina: 2.500 mm * Višina: 1.000 mm Pnevmatike: * Prva os: 385 / 65 R 22,5, zračno vzmetenje / 40% * Zadnja os: 385 / 65 R 22,5, zračno vzmetenje / 45% ----Cena: 5.900,- EUR + 19% DDV Za dodatna vprašanja nas lahko kontaktirate na naslednjih telefonskih številkah: Govorimo: nemško, angleško, francosko in ????? Pridržujemo si pravico do napak pri pisanju, sprememb in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 27.050 kg, skupna masa: 33.500 kg, konfiguracija osi: 3 osi, prva registracija: 07/2001, prostornina tovornega prostora: 55 m³, Leto izdelave: 2001, Oprema: ABS, Schwarzmüller 3-axle 55m³ aluminium tipper with tarpaulin Condition: good Cjdpfowm Ukqjx Aipjrc Tyres: 30–60%

Stanje: rabljeno, največja dovoljena obremenitev: 14.100 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2015, Leto izdelave: 2015, Oprema: ABS, Jumbo prikolica Schwarzmüller s platformo in stranskimi deskami Csdpfx Aex Sbwzoipjrc

Stanje: rabljeno, lastna masa: 6.000 kg, največja dovoljena obremenitev: 32.270 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2012, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Schwarzmüller timber semi-trailer 3-axle | BPW axles with disc brakes | Unladen weight 6000 kg | Lift axle | Tyres: 385/65 R22.5 Subject to errors, input mistakes, and prior sale. Crjdpfxewdwp Ds Aipoc

Stanje: rabljeno, lastna masa: 9.300 kg, največja dovoljena obremenitev: 24.700 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2009, skupna višina: 138.400 mm, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5, Oprema: ABS, registracija tovornjaka, Schwarzmüller dropside semi-trailer | Coil well | Hydraulic tilted loading | Tyres: 385/55R22.5 | Edscha sliding roof | Mercedes axles with disc brakes | Lift axle, errors, input mistakes and prior sale reserved. Cjdpfjt Di Icox Aiperc

Stanje: rabljeno, lastna masa: 8.700 kg, največja dovoljena obremenitev: 25.308 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2012, višina nakladalnega prostora: 3.000 mm, vzmetenje: zrak, velikost pnevmatike: 435/50R19,5, Oprema: ABS, Schwarzmüller drop side trailer | Coil well | Hydraulic tilting loading | Tyres: 435/50R19.5 | Edscha sliding roof | 3.0 metre internal height | Mercedes axles with disc brakes Seller: Christopher Glock (German/English) Mobile/Whatsapp | Email: christopher. Entire stock at: Hofgasse 25, A-4063 Hörsching | Subject to errors, input mistakes and prior sale. | Sale to trade customers only. Cjdet Dq Epjpfx Aipjrc

Stanje: novo, lastna masa: 4.300 kg, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 275/70R22,5, Oprema: ABS, Schwarzmüller Jumbo construction material trailer | BPW axles with disc brakes | Pallet box, 2x stainless steel toolboxes | Rear storage compartment 600x400x2,900 mm | Side wall height 1.00 m, front wall height 1.40 m | Loading dimensions: 7.10 m x 2.48 m | XLite aluminum rims | Tires: 275/70R22.5 twin tires | Plastic tarpaulin with rubber straps | Aluminum storage tray and front entry step | Subject to errors, input mistakes, and prior sale. Credpotuwbpsfx Aipoc

Stanje: rabljeno, lastna masa: 8.600 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2019, prostornina tovornega prostora: 60 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, stanje pnevmatik: 100 odstotek, Oprema: ABS, Stas FSS Ferrostar 60m³ steel tipper body | ABS / EBS | SAF axles | Disc brakes | Lift axle | Tyres: 385/65 R 22.5 | Front platform | Rear portal doors | Rolling tarpaulin | Lift-lowering system | Suspension: lift / air / air | Sidewalls and floor made of Hardox 450 | LED work lights | Rear underride protection, foldable | Loading dimensions: | Length: approx. 11,000 mm | Width: approx. 2,430 mm | Height: approx. 2,280 mm | Volume: 60 m³ | Unladen weight: Crsdpfswwld Aex Aipsc

Stanje: rabljeno, lastna masa: 5.730 kg, največja dovoljena obremenitev: 32.270 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2014, naslednji pregled (TÜV): 05/2025, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Schwarzmüller timber trailer, 3-axle | BPW axles with disc brakes | Unladen weight: 5,730 kg | Payload: 32,270 kg | Lifting axle | Technical inspection valid until 05/25 | Tyres: 385/65 R22.5. Subject to error, input mistakes, and prior sale. Crjdpswc Apyofx Aipsc

Stanje: novo, največja dovoljena obremenitev: 23.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete inventory of vehicles available immediately or at short notice on our website. Excerpt of equipment. Full equipment details available upon request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform including sloped frame, corners beveled * Approx. 5,350 mm = low-bed platform – flat loading area * Approx. 850 mm = rear ramp slope * Overall width: approx. 2,550 mm (or approx. 3,000 mm with extensions) * Loaded loading height: approx. 870 mm * When assembling tractor-trailer combinations, compliance with the legally permissible overall height and train length must be observed! Chassis/Frame: * Steel welded construction with front frame cranking and rear bevel * Ramp slope with excavator bucket recess in the center = rear depression between longitudinal beams, approx. 2,300 mm long * Integrated into the outer frame: 5 pairs of approx. 4 t lashing lugs (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out lashing rings, approx. 10 t (4x low-bed, 1x on ramp slope, 2x on raised platform) * Standard ball bearing slewing ring Frame attachments: * Both sides of the low-bed platform equipped with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery being transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, arrangement: 1 pair at the front of the raised platform inside longitudinal beams, 1 pair right and left in the excavator bucket recess at the far rear, 1 pair at the front of the raised platform before the frame cranking, inside beams, 1 pair at the rear of the low-bed before the ramp slope in the bucket recess, left + right Towing device: * Fixed tow bar with swivel coupling eye approx. 40 + 50 mm, cranked design, silent bushing mounting, tow bar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Tow bar length approx. 1,800 mm Support equipment: * 2 automatic folding support legs at the rear Axles: * SAF air-suspension low-loader axles with drum brakes, load capacity 11 t/axle, S-cam brakes approx. 300/200 mm, automatic brake adjusters Wheels: * 12 tires, size 235/75 R 17.5, 141J, brand as per factory selection Brake system/Suspension: * Brake system according to ECE regulation R13 * Two-line air brake system * Manufacturer Wabco, EBS system 4S3M, 1st and 2nd axle equipped with sensors * RSS/RSP Stability Program * Spring-loaded parking brake on 2nd and 3rd axles * Brake/air connection lines with 2 separate couplings (yellow/red) * EBS/ABS connection cable * Air suspension with lift/lowering function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle bump stop on the front axle Assistance/Safety systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS CAN bus signal for display in the driver’s cab (truck must be prepared accordingly, not a calibrated scale) * Tire pressure monitoring per ECE regulation 141, with pressure sensors in the wheels, for display in the cab (display, etc. must be present in the tractor unit) Floor: * Approx. 50 mm softwood flooring, impregnated, protruding approx. 5–10 mm above the top edge of the frame Crsdpfx Aey Aug Rsipsc * Steel chequer plate covers over the wheels Ramps: * 2 foldable, one-piece lightweight steel loading ramps, approx. 2,800 mm long, approx. 750 mm wide, with 35 mm

Stanje: novo, največja dovoljena obremenitev: 30.860 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpts from the equipment specifications. Full equipment details available upon request. Chassis: * Steel welded construction with front frame cranking, chamfered front corners, and rear chamfer, drive-up slope with centrally located excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed, retractable approx. 10 t lashing rings (2x on the raised platform, 1x at the front cranked slope, 3x in the low bed between the wheel recesses, 1x on the drive-up slope) Credpfx Asy Auhnoipec 2 Pairs of Wheel Recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the cranking, including one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN each * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between 3rd and 4th axle, including one-piece drive-over aluminium cover, suitable for transporting wheel loaders with wheelbase approx. 2,700 - 3,600 mm, wheel diameter approx. 1,485 – 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer beam spacing) Frame Attachments: * 5 pairs of stake pockets in the outer frame for rectangular tube stakes approx. 100 x 50 x 5 mm (3x in the low-bed, 2x on the raised platform) * Low-bed platform with extendable width extensions on both sides with softwood planks approx. 50 mm (the track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distributed as follows: 1 pair at the front on the raised platform inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front on the raised platform before the cranking inside the longitudinal beams, 1 pair at the rear of the low-bed before the drive-up slope in the excavator bucket recess left and right Towing Device: * Fixed towing drawbar with approx. 50 mm heavy-duty towing eye, cranked design, silent bushing mounting, drawbar holding spring with tensioner * Truck coupling height from approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support Device: * 2 hydraulic rear supports, operated individually, controls housed in a separate stainless-steel box Axles: * SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, brand Conti HTR2 (tyre load capacity approx. 12 t/axle) Brake System/Suspension: * Brake system per ECE regulation R13, two-line pneumatic system * Brake system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed * RSS/RSP – stability control programme * Spring-loaded parking brake on the 3rd and 4th axles * Aluminium air tanks for total weight 44 t * Brake/air connection lines with two separate coupling heads, yellow/red * EBS/ABS connection cable * Tension rubber as holder for EBS and electrical connectors * Air suspension with lift and lowering device, operated separately at front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/safety systems: * SWIT – Schwarzmüller Intelligent Telematics Floor: * Softwood floor, approx. 50 mm, impreg

Stanje: rabljeno, največja dovoljena obremenitev: 26.760 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2012, naslednji pregled (TÜV): 08/2012, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.800 mm, Leto izdelave: 2012, Oprema: ABS, Prva roka Avstrija, vrhunsko stanje. Protiutež za vlečni viličar spredaj pri čelni steni (glej fotografijo). Fiksna aluminijasta streha, nalagalne palice, tovorni sistem, dvigalna os z zračno vzmetenjem. Crjdjyd Tawjpfx Aipjc

Stanje: rabljeno, največja dovoljena obremenitev: 30.430 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.719 mm, Oprema: ABS, Schwarzmüller SPA 3/E, ULTRALIGHT, letnik 10/2020, SAF osi, 1. in 3. dvigljiva os, premična streha, premična ponjava, portalna vrata, kolutne zavore, ABS, pnevmatike 385/65 R22,5 stanje: 1. os 9 mm, 2. os 8 mm, 3. os 13 mm, višina nakladanja 2719 mm, rezerva. Lastna masa 5570 kg, skupna masa 36.000 kg. Cedpjxfx Nlofx Aiporc Več pod: FB: Dvorak Trucks Czechia UVOZ-IZVOZ-PRODAJA-NAKUP-KOMISIONA PRODAJA TOVORNJAKOV IN GRADBENIH STROJEV SERVIS TOVORNJAKOV SERVIS PNEVMATIK PRALNICA TOVORNJAKOV TAHOGRAF

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 5.780 kg, konfiguracija osi: 3 osi, višina nakladalnega prostora: 2.800 mm, stanje pnevmatik: 40 odstotek, Leto izdelave: 2017, Oprema: ABS, Schwarzmüller J-serija 1 lastnik TÜV veljaven do 03.2027 Alu platišča Letnik 2017 Dobro stanje Delovni čas: pon-pet 07:30-12:00 13:00-18:00, sobota 07:30-17:00. Tel/Whatsapp/Viber: +43 664 861 15 29 Alexandar Ilic Tel/Whatsapp/Viber Angleško: +43 664 928 75 19 Mladen Ilic Codpsyhz T Djfx Aipjrc

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 5.780 kg, konfiguracija osi: 3 osi, višina nakladalnega prostora: 2.800 mm, stanje pnevmatik: 40 odstotek, Leto izdelave: 2017, Oprema: ABS, Schwarzmüller J-serija 1 lastnik Tehnični pregled do 12.2026 Aluminijasta platišča Leto izdelave 2017 V dobrem stanju Codpoyhwr Iefx Aipjrc

Stanje: rabljeno, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 12.400 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2022, Oprema: ABS, 4-AXLE LOW LOADER SEMITRAILER WITH CRANKED PLATFORM Tractor unit data and equipment: 3-axle tractor unit Please check saddle height under the "Dimensions" section! No modifications to the tractor unit required Please note: 5,000 mm = maximum distance from front of tractor unit to center of fifth wheel coupling 1,730 mm = minimum clear front distance from fifth wheel coupling center 2,230 mm = maximum rear turning radius Tractor unit suspension type: air suspension Gross train weight (permitted): 40 t Gross weight (technical): 58 t Axle unit load (technical): 40 t Saddle load (technical): 18 t Approx. 3,500 mm = front cranked platform Approx. 7,970 mm = low bed platform – level loading area Approx. 730 mm = rear ramp slope Overall width approx. 2,550 mm (approx. 3,000 mm with extensions) Loaded loading height approx. 870 mm Unloaded loading height approx. 900 mm With unloaded saddle height approx. 1,250 mm For combined vehicle operation, please observe legal total height and total train length limits! Welded steel construction with front inclined frame crank and rear incline (without central excavator shovel recess) 5 pairs of lashing pockets in the low bed for box stanchions 100 x 50 mm 4 pairs of lashing eyes on the outer frame 2 pairs of 5t lashing rings under the outer frame – between the axles 4 pairs of recessed 4t lashing rings on the cranked platform 7 pairs of recessed, retractable 5t lashing rings (10t technical pull force) in the low bed + 1 pair folding, between 2nd and 3rd axle 1 pair of recessed, retractable 10t lashing rings on front crank slope Pair of recessed, foldable 10t lashing rings on the inside of side member after 2nd axle 1 pair of recessed, foldable 10t lashing rings on the inside of side member after front crank Interchangeable 2" king pin 5 pairs of steel box stanchions 100x50x5 mm, usable height approx. 1,000 mm, hot-dip galvanized, stanchion securing by pressure actuation # Permissible stanchion load 1,000 kg per stanchion with load application point 500 mm above ground Both sides of the low bed platform with extendable widening elements with 50 mm softwood planking (track width of the construction machines to be transported must not exceed outer frame width of 2,550 mm) Mechanical steel support winches, 2 x 12 t, single-sided operation (right), load compensation, manufacturer at factory’s discretion Cedpfxju Uzv Eo Aiperc 2 hydraulic supports at rear – individually operable, controls housed in a separate stainless steel box AF air-suspension low loader axles with drum brakes, load capacity 11 t/axle, S-cam brake 300/200 mm, automatic brake slack adjusters Axle spacing 1,310 + 1,310 + 1,310 mm 3rd and 4th axle as stub axle/friction-steered SAF trailing axles, approx. 20° steering angle, electro-pneumatically controlled reverse lock automatically activated via reverse gear, also switchable from the cab and with release valve on the trailer Start-assist on 1st axle = speed-limited pressure relief, unloadable when loaded, actuation via button in cab Mechanical odometer mounted on 2nd axle, right side in driving direction 16 pcs. Tires 245/70 R 17.5, 146/146F (tire load capacity 12t/axle) 16 pcs. Steel rims 6.75 x 17.5, with offset, silver (tire load capacity 12t/axle) 1 pc. Tire 245/70 R 17.5, 146/146F, make: Conti HTR2 (tire load capacity 12t/axle) 1 pc. Steel rim 6.75 x 17.5, with offset, silver Tread depth: 10-11 mm WIT – Schwarzmüller Intelligent Telematics, "LOCAL TRAC" package ... further details on request! Export pla

Stanje: rabljeno, največja dovoljena obremenitev: 14.050 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2011, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.500 mm, Leto izdelave: 2011, Oprema: ABS, * HUGENTOBLER UL-18 * Prekladalni sistem * Keson s ponjavo * Aluminijasta tla * Dolžina tovornega prostora 7000 mm Csdpfxoyhtnio Aipjrc * Višina tovornega prostora 2500 mm * Aluminijasta platišča * Pnevmatske gume 385/55R22.5 * Nosilnost 14050 kg * Lastna teža 3950 kg * Letnik 2011 * Stanje zelo dobro * Delovni čas od ponedeljka do petka 07:30-12:00 13:00-18:00, sobota 07:30-17:00. * E-naslov: * Tel/Whatsapp/Viber: Alexandar Ilic * Tel/Whatsapp/Viber Angleško: Mladen Ilic