Humbaur Htk Prikolice nakup rabljenega (553)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, Vehicle Description: • Manufacturer: Humbaur GmbH • Model: HTK-Garant TA G VD • Variant: MF4S • Version: 25 • Commercial Designation: HTK 3500.41 2016 • Vehicle Class: O2 ⸻ Technical Data: • Number of Axles / Wheels: 2 axles / 4 wheels • Axle Distance (1–2): 3,076 mm • Wheelbase: 3,826 mm • Length: 5,482 mm • Width: 2,272 mm • Height: 1,240 mm • Loading Length: 4,102 mm • Rear Overhang: 1,638 mm • Coupling to Rear Distance: 5,445 mm ⸻ Dksdjwyw Hzspfx Adqek Weights: • Unladen Weight (ready to drive): 950 kg • Actual Vehicle Weight: 1,185 kg • Permissible Total Weight (laden): 3,500 kg • Permissible Axle Load per Axle: 1,750 kg (per axle) • Permissible Axle Group: 3,500 kg • Vertical Load at Coupling Point: 150 kg ⸻ Tyres & Wheels: • Tyre Combination (e.g.): 195/50 R13C 104N on rim 6Jx13 ET30 (additional permitted combinations: see remarks under item 52) ⸻ Brake System & Bodywork: • Brake Connection: Mechanical • Bodywork Code: DC10 ⸻ Towing Device: • Approval Mark: E1 55R-011594 • Characteristics: • D-Value: 31 kN • S-Value (Vertical Load): 325 kg ⸻ Maximum Speed: • 100 km/h ⸻ Note on Classification of the Trailer: As this is an HTK (Humbaur Tandem Tipper) with high payload and a tipping loading platform, this trailer is a: Three-way tipper - - - All specifications without guarantee - - - Illustrations may differ - - -

Stanje: novo, lastna masa: 850 kg, največja dovoljena obremenitev: 1.840 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Side Tipper HTK Alu 2700.31 Permissible total weight: 2700 kg Payload: 1850 kg Unladen weight: 850 kg Body dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 745 mm Loading platform hydraulically tiltable via hand pump Tipping angle: rear 42°, side 50° - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized (immersion bath) - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight with additional electric pump - 13-pin plug and reversing light - Sidewalls made of powder-coated, galvanized steel, completely removable Dkodpfx Adsrvgtveqjk - Rear flap with swinging function - 6 lashing rings mounted on platform floor, each with 800 kg lashing capacity, Dekra tested - Support wheel - Slot for aluminium ramps pre-installed for easy retrofitting Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit (transfer) licence plate. We repair trailers of all makes. Additional accessories on request. Technical changes, price changes, and errors excepted. No liability for errors or misprints. Features: automatic reverse function, rubber-sprung axle, independent suspension, tiltable loading platform, support wheel, marker lights, galvanized steel sidewalls, braked, incl. warranty, V-drawbar hot-dip galvanized, chassis and tipping bridge hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump–from 3000 kg permissible total weight with electric pump, 13-pin plug and reversing light, sidewalls powder-coated and fully removable, swinging rear flap, 6 lashing rings with 800 kg capacity each (Dekra certified), slot for aluminium ramps pre-installed for easy retrofitting.

Stanje: novo, lastna masa: 870 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Gross Vehicle Weight: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Internal Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Dksdpferq Ew Tox Adqjk Loading Height: 750 mm Load platform hydraulically tip-able with hand pump and electric pump Tipping angle rear 42°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made from one-piece steel - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible gross weight also with electric pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear panel pendulum-type - 6 lashing rings mounted on bed, 800 kg tensile force each, Dekra certified - Jockey wheel - Stake pocket prepared for retrofitting aluminium ramps Price includes vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun On request, we offer a free temporary registration plate. We repair trailers from all manufacturers. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability is accepted for errors or typographical mistakes. Features: auto-reverse braking, rubber suspension axle, independent wheel suspension, tipper platform, jockey wheel, marker lights, hot-dip galvanized chassis and tipper body, braked, includes warranty, V-drawbar hot-dip galvanized, one-piece steel tipper body, 4-stage hard-chromed tipper cylinder, hand pump, electric pump from 3,000 kg permissible gross weight, 13-pin plug and reversing lights, 350 mm high fully removable aluminium drop sides, pendulum-type rear panel, 6 lashing rings on bed (800 kg tensile force each, Dekra certified), ramp pocket for easy retrofitting of aluminium ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.460 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Permissible Total Weight: 3500 kg Payload: 2315 kg Unladen Weight: 1185 kg Body Dimensions: 4100 x 2100 x 350 mm Tyres: 13 inch Loading Height: 760 mm Load Platform hydraulically tiltable with hand pump and electric pump Tipping Angle rear 45°, lateral 45° with 350 mm aluminium drop-side extension - V-drawbar, hot-dip galvanized - Chassis and tipper platform, hot-dip galvanized Dkedpfx Ajflw Sbodqsk - Tipping platform made of steel, pressed from a single piece - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg total weight electric pump with hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear tailgate, swinging - 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified - Jockey wheel - Plank box prepared for easy retrofit of aluminium planks Price incl. vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical alterations, price changes, and errors excepted. No liability for errors or misprints. Automatic reversing system, rubber suspension axle, independent suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipper platform hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipping platform made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg total weight electric pump with hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, swinging rear tailgate, 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified, plank box prepared for easy retrofit of aluminium planks.

Stanje: novo, lastna masa: 1.140 kg, največja dovoljena obremenitev: 2.360 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.240 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Gross Vehicle Weight: 3,500 kg Axles: Tridem Payload: 2,360 kg Unladen Weight: 1,140 kg Body Dimension: 4,100 x 2,100 x 350 mm Tyres: 13 inch Loading Height: 750 mm Load area hydraulically tiltable with hand pump and electric pump Tipping angle rear 45°, side 45° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made from single-piece steel - 4-stage hard-chrome-plated tipping cylinder - Hand pump, from 3,000 kg gross weight with additional electric pump - 13-pin plug and reverse lights - Drop sides made of aluminium, 350 mm high, fully removable - Rear flap is swing-type - Eight lashing rings fitted on the platform, each with 800 kg load capacity, Dekra-tested - Jockey wheel - Ramp tray prepped for easy retrofit of aluminium ramps Dsdpfod T Svtjx Adqokk Price includes vehicle registration document (part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request we can provide a free transfer number plate. We repair trailers from all manufacturers. Additional accessories on request. Subject to technical modifications, price changes, and errors. No liability for typing or printing errors. Reverse automatic, rubber suspension axle, independent suspension, tiltable load area, jockey wheel, marker lights, hot-dip galvanized chassis and tipper platform, braked, incl. warranty, V-drawbar, hot-dip galvanized, tipper platform made from single-piece steel, 4-stage hard-chrome-plated tipping cylinder, hand pump, from 3,000 kg gross weight with electric pump and hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm, fully removable, swing-type rear flap, 8 lashing rings on the platform, 800 kg per lashing ring, Dekra tested, ramp tray prepped for easy retrofit of aluminium ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.240 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: HTK Alu 3500.41 3-Way Tipper Gross Vehicle Weight: 3,500 kg Payload: 2,315 kg Unladen Weight: 1,185 kg Bed Dimensions: 4,100 x 2,100 x 350 mm Tyres: 13-inch Loading Height: 760 mm Load bed hydraulically tiltable with hand pump and electric pump Tipping angle: rear 45°, lateral 45° - V-drawbar, fully hot-dip galvanized - Chassis and tipper platform fully hot-dip galvanized via immersion bath - One-piece steel tipper platform - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible total weight with additional electric pump - 13-pin connector and reversing lights - 350 mm high aluminium drop sides, fully removable - Rear flap can swing - 8 lashing rings mounted on the platform floor, each with a pulling force of 800 kg, Dekra-tested - Jockey wheel - Plank box pre-installed for easy retrofitting of aluminium ramps Price includes vehicle registration document (registration certificate part II and COC papers). We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide free transfer plates. We repair trailers of all manufacturers. Additional accessories available on request. Technical and price changes as well as errors excepted. No liability for errors or misprints. Dkedpfx Adjri Tawsqsk Features: auto-reverse braking system, rubber-sprung axle, independent suspension, tiltable load area, jockey wheel, marker lights, fully hot-dip galvanized chassis and tipper platform, braked, incl. warranty, V-drawbar fully hot-dip galvanized, one-piece steel tipper platform, 4-stage hard-chromed tipping cylinder, hand pump, additional electric pump from 3,000 kg GVW, 13-pin plug and reversing lights, 350 mm high fully removable aluminium drop sides, rear swing flap, 8 lashing rings mounted on the platform floor, pulling force 800 kg per ring, Dekra-certified, plank box pre-installed for easy retrofitting of aluminium ramps.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 740 mm Load platform hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, side: 50° With leaf mesh extension/steel mesh extension 600 mm high, swinging on all 4 sides - V-drawbar hot-dip galvanised - Chassis and tipping platform hot-dip galvanised by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; electric pump with hand pump from 3,000 kg gross weight - 13-pin connector and reversing lights - Side panels made of aluminium, 350 mm high, fully removable - Rear gate, pendulum mounted - 6 lashing rings fitted on platform floor, each ring tested by Dekra for a load capacity of 800 kg Dkodperazlkefx Adqsk - Jockey wheel - Channel for ramps, pre-installed for easy retrofitting of aluminium ramps Price includes vehicle registration documents (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a complimentary transit/temporary licence plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical modifications, price changes and errors excepted. No liability assumed for errors or misprints. Automatic reversing mechanism, rubber spring axle, independent wheel suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipping platform hot-dip galvanised by immersion, braked, includes warranty, V-drawbar hot-dip galvanised by immersion, one-piece steel construction tipping platform, 4-stage hard-chromed tipping cylinder, hand pump, electric pump with hand pump from 3,000 kg gross weight, 13-pin connector and reversing light, aluminium side panels 350 mm high, fully removable, rear gate pendulum mounted, 6 lashing rings on the platform floor (Dekra certified, 800 kg per ring), ramp channel pre-installed for easy retrofitting with aluminium ramps.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 1.335 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.220 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2000.27 Dsdpfx Aegi Sr Sjdqekk Permissible Total Weight: 2,000 kg Payload: 1,335 kg Unladen Weight: 665 kg Body Dimensions: 2,670 x 1,500 x 350 mm Tyres: 13 inch Loading Height: 750 mm Load Area hydraulically tiltable with hand pump Tipping angle: rear 45°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg total weight, electric pump with hand pump - 13-pin connector and reversing lights - Drop sides made from powder-coated, galvanized sheet steel, fully removable - Rear flap with swing function - 6 tie-down rings mounted on bed floor, load capacity 800 kg per ring, DEKRA certified - Jockey wheel - Channel as preparation for aluminium ramps for easy retrofitting Price includes vehicle registration document (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free transit license plate. We repair trailers of all makes. Additional accessories on request. Technical modifications, price changes, and errors reserved. No liability is assumed for errors or misprints. Reverse-automatic, rubber-sprung axle, independent suspension, tiltable load area, jockey wheel, marker lights, galvanized steel sheet, braked, incl. warranty, V-drawbar hot-dip galvanized, chassis and tipping bridge hot-dip galvanized by immersion, tipping bridge made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg total weight electric pump with hand pump, 13-pin connector and reversing lights, powder-coated, fully removable drop sides, rear flap with swing function, 6 tie-down rings mounted on the bed floor, load capacity 800 kg per ring, DEKRA certified, ramp channel prepared for easy retrofitting with aluminum ramps.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyre Size: 13 inch Loading Height: 740 mm Loading platform can be hydraulically tipped with hand pump and electric pump Tipping angle: rear 42°, side 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping bridge, fully hot-dip galvanized by immersion - Tipping bridge made of one-piece steel - 4-stage hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights Dkedsvtf I Uepfx Adqjk - Aluminum side walls, 350 mm high, fully removable - Rear flap is swing- and drop-type - 6 lashing rings mounted on the platform floor, tensile force 800 kg per ring, Dekra approved - Jockey wheel - Shaft for installing aluminum ramps, pre-equipped for easy retrofitting - Black side walls Price includes vehicle documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following brands: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. A free transfer license plate is available upon request. We repair trailers from all manufacturers. Additional accessories available on request. Technical specifications, prices and availability subject to change. No liability for errors or misprints. Features: automatic reverse, rubber suspension axle, independent wheel suspension, tiltable loading platform, jockey wheel, marker lights, chassis and tipping bridge hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipping bridge made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminum side walls, fully removable, swing-type rear flap, 6 lashing rings on the platform floor (800 kg tensile force each, Dekra approved), shaft pre-installed for retrofitting aluminum ramps, black side walls.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.500 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,7 m³, barva: drugo, gradbena višina: 1.210 mm, delovna širina: 2.003 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 3500.37 Permissible gross weight: 3,500 kg Payload: 2,500 kg Unladen weight: 1,000 kg Load bed dimensions: 3,630 x 1,850 x 350 mm Tyres: 13 inch Loading height: 740 mm Load platform hydraulically tipppable with manual pump and electric pump Tipping angle rear 42°, side 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping platforms, fully hot-dip galvanized - One-piece steel tipping platform - 4-stage hard chrome tipping cylinder - Manual pump, and from 3,000 kg permissible gross weight onwards, electric pump with manual pump - 13-pin plug and reversing lights - Aluminium side boards, 350 mm high, fully removable - Swinging rear gate - 8 lashing rings on the bed, pull force 800 kg per ring, Dekra-certified - Support wheel - Plank compartment prepared for aluminium planks for easy retrofitting Price includes vehicle registration certificate (Certificate of Registration Part II and COC papers) Dksdperq Exbjfx Adqek We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, you will receive a free temporary license plate. We repair trailers of all makes. Further accessories on request. Technical modifications, price changes, and errors reserved. No liability is assumed for errors or misprints. Features: automatic reverse, rubber suspension axle, independent suspension, tilting load platform, support wheel, position lights, hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard chrome tipping cylinder, manual pump, from 3,000 kg permissible gross weight electric pump with manual pump, 13-pin plug and reversing lights, aluminium sidewalls 350 mm high, fully removable, swing rear gate, 8 lashing rings on the load bed, pulling force 800 kg per ring, Dekra certified, plank compartment prepped for easy retrofitting of aluminium planks.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 2.025 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2700.27 Gross Vehicle Weight: 2700 kg Payload: 2025 kg Unladen Weight: 675 kg Internal Dimensions: 2670 x 1500 x 350 mm Dkjdpfx Aeri Tbxjdqjk Tyres: 13 inch Loading Height: 725 mm Load bed hydraulically tiltable with hand pump Tipping angle: rear 45°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipping frame, hot-dip galvanized - Tipping platform made of one-piece steel - 4-stage hard-chromed tipping cylinder - Hand pump; for permissible total weight from 3000 kg electric pump with hand pump - 13-pin connector and reversing lights - Drop sides made of powder-coated, galvanized steel plate, completely removable - Rear tailgate with swing function - 6 lashing rings mounted on platform floor, rated for 800 kg per ring, Dekra certified - Jockey wheel - Boarding plank compartment pre-installed for retrofitting aluminium planks Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, you will receive a free temporary registration plate from us. We repair trailers from all manufacturers. Additional accessories upon request. Subject to technical modifications, price changes, and errors. No liability for errors or misprints. Features: Automatic reverse, rubber suspension axle, independent wheel suspension, tilting load area, jockey wheel, marker lights, galvanized steel plate, braked, includes warranty, hot-dip galvanized V-drawbar, hot-dip galvanized chassis and tipping frame, one-piece steel tipping platform, 4-stage hard-chromed tipping cylinder, hand pump (from 3000 kg permissible total weight: electric pump with hand pump), 13-pin connector and reversing lights, powder-coated drop sides, fully removable, rear tailgate with swing function, 6 lashing rings mounted on floor rated at 800 kg each, Dekra certified, boarding plank compartment prepared for easy retrofitting of aluminium boarding planks.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 2.025 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 2700.27 Permissible total weight: 2700 kg Payload: 2025 kg Unladen weight: 675 kg Bed dimensions: 2670 x 1500 x 350 mm Tyres: 13-inch Loading height: 725 mm Load platform hydraulically tipable via manual pump Tipping angle: rear 45°, sides 50° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made of one-piece steel - 4-stage hard-chrome tipping cylinder - Electric pump with emergency hand pump - 13-pin connector and reversing lights - Side panels made of powder-coated, galvanized steel, fully removable - Rear tailgate can be swung - 6 lashing rings mounted on the bed, each with 800 kg load capacity, Dekra certified - Jockey wheel - Lashing trough preinstalled for optional aluminum floor inserts – easy to retrofit Price includes vehicle registration documents (registration certificate Part II and COC papers). We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. You can request a free temporary number plate for transport. We repair trailers of all makes. Additional accessories available on request. Dkodpfx Aori Tb Asdqek Technical modifications, price changes, and errors excepted. We accept no responsibility for mistakes or typographical errors. Features: reversing automatic brake, rubber suspension axle, independent wheel suspension, tipper bed, jockey wheel, marker lights, galvanized steel panels, braked, includes warranty, V-drawbar hot-dip galvanized, chassis and tipper platform hot-dip galvanized, single piece steel tipper platform, 4-stage hard-chrome tipping cylinder, manual pump, from 3000 kg permissible total weight with electric pump and manual pump, 13-pin plug and reversing lights, powder-coated fully removable side panels, swing rear tailgate, 6 lashing rings mounted in bed rated to 800 kg each (Dekra certified), preinstalled trough for easy retrofitting of aluminum floor inserts.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3500 kg Payload: 2512 kg Unladen Weight: 988 kg Body Dimensions: 3140 x 1750 x 350 mm Tyres: 195 50 R13C Loading Height: 740 mm Load Platform hydraulically tiltable via hand pump and electric pump Tipping Angle: rear 42°, lateral 50° With 600 mm high steel side extension panels, pendulum-mounted on all four sides - V-drawbar, hot-dip galvanized immersion - Chassis and tipper frame hot-dip galvanized immersion - Tipper body made from steel, single-piece construction - 4-stage hard-chromed tipping cylinder - Hand pump, electric pump from 3000 kg GVW up, combined with hand pump - 13-pin connector and reversing lights - Removable aluminium side walls, 350 mm high, completely detachable - Rear tailgate pendulum-mounted - 6 lashing rings mounted on the bed, tensile force 800 kg per ring, Dekra certified - Support wheel - Plank compartment pre-installed for easy retrofitting with aluminium planks Price includes vehicle documents (Registration Certificate Part II and COC papers) Dsdpsfbiavjfx Adqskk We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit license plate. We repair trailers of all manufacturers. Additional accessories available upon request. Technical modifications, price changes, and errors excepted. No liability for mistakes or typographical errors. Reversing automatic, rubber-sprung axle, independent suspension, tiltable load platform, support wheel, clearance lights, chassis and tipper frame hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipper body single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg GVW up electric pump with hand pump, 13-pin plug and reversing lights, removable aluminium sidewalls 350 mm high, rear tailgate pendulum-mounted, 6 lashing rings mounted on the platform floor, tensile strength 800 kg per ring, Dekra certified, plank compartment as preparation for easy retrofitting with aluminium planks.

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 750 mm Loading platform hydraulically tiltable, operated by hand pump and electric pump Tipping angle: rear 42°, sides 50° With leaf mesh or steel mesh extension 600 mm high, foldable on all four sides - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight also with electric pump plus hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear flap is pendulum-mounted - 6 lashing rings mounted on the bed, tensile load 800 kg per ring, DEKRA certified - Support wheel - Ramp compartment pre-installed for easy retrofitting with aluminum ramps Dedsktm Suopfx Adqokk Price includes vehicle title (Vehicle Registration Certificate Part II and COC papers). We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transfer license plate. We repair trailers of all makes. Further accessories available on request. Technical changes, price updates, and errors reserved. No liability for misprints or mistakes. Features: reversing automatic brake, rubber torsion axle, independent suspension, tiltable loading platform, support wheel, position lights, chassis and tipping bridge hot-dip galvanized by immersion, braked, incl. warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg permissible total weight also electric pump plus hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, pendulum-mounted rear flap, 6 lashing rings on the bed, tensile load 800 kg per ring, DEKRA certified, ramp compartment pre-installed for easy retrofitting with aluminum ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.100 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,7 m³, barva: drugo, gradbena višina: 1.251 mm, delovna širina: 2.022 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.37 Permissible Gross Weight: 3000 kg Payload: 2100 kg Unladen Weight: 900 kg Body Dimensions: 3630 x 1850 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable via manual pump and electric pump Tipping angle rear 45°, lateral 45° - V-drawbar, fully hot-dip galvanized - Chassis and tipping platform fully hot-dip galvanized - Tipping bridge made from one-piece steel construction Dodpsl Dqldjfx Adqokk - 4-stage hard-chromed tipping cylinder - Manual pump; from 3000 kg gross weight onwards: electric pump with manual backup - 13-pin plug and reversing lights - Aluminum side walls, 350 mm high, fully removable - Rear tailgate can be used as a swinging gate - 8 lashing rings mounted on the bed, tensile force 800 kg per ring, Dekra tested - Jockey wheel - Preparation for aluminum ramps (ramp compartment) for easy retrofitting Price includes registration documents (Certificate of Title Part II and COC papers). We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price modifications, and errors excepted. No liability for errors or misprints. Features: auto-reverse brakes, rubber suspension axle, independent suspension, tiltable loading platform, jockey wheel, marker lights, fully hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from one-piece steel, 4-stage hard-chromed tipping cylinder, manual pump, from 3000 kg gross weight electric pump with manual backup, 13-pin plug and reversing lights, aluminum side walls 350 mm high, fully removable, rear swinging tailgate, 8 lashing rings mounted to the platform with 800 kg tensile load per ring, Dekra approved, ramp compartment as preparation for retrofitting aluminum ramps.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Box Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tipping angle: rear 42°, side 50° Key Features: - V-drawbar, hot-dip galvanised - Chassis and tipping bridge hot-dip galvanised - Tipping bridge made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible gross weight with electric pump and hand pump - 13-pin plug and reversing lights - Side walls made from 350 mm high aluminium, completely removable - Rear tailgate can swing - 6 lashing rings mounted on the platform floor, each with 800 kg pull force, Dekra certified - Support wheel - Channel prepared for easy retrofit of aluminium loading ramps Dkjdpfsrazk Uox Adqsk Price includes vehicle registration document (Registration Certificate Part II and COC papers) We have a large selection of trailers in stock from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price adjustments, and errors excepted. No liability for errors or misprints. Features: Reverse automatic brake, rubber suspension axle, independent wheel suspension, tiltable loading platform, support wheel, marker lights, chassis and tipper platform hot-dip galvanised, braked, including warranty, V-drawbar hot-dip galvanised, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg gross weight with electric pump and hand pump, 13-pin plug and reversing lights, 350 mm high aluminium drop sides, completely removable, swinging rear gate, 6 lashing rings on floor (800 kg pull each, Dekra tested), ramp channel for easy retrofit of aluminium ramps.

Stanje: novo, največja dovoljena obremenitev: 2.500 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.855 mm, višina nakladalnega prostora: 350 mm, Humbaur Three-Way Tipper HTK 3500.37, electrically tipable Permissible total weight: 3,500 kg Internal box dimensions: 363x185x35 cm (LxWxH) Equipment: * Electric tipping function with emergency manual pump * Rear pendulum tailboard * Integrated ramp storage channels * Chassis and tipping bridge welded and hot-dip galvanized * 2 mm galvanized steel floor Dksdpfxjx T Sfxo Adqjk * 6 recessed lashing eyes on the loading area (800 kg per eye) * 350 mm high aluminium drop sides all around, foldable and removable * Automatic jockey wheel * Lighting protected in underride guard * Three-stage telescopic hydraulic cylinder * Tyres: 195/50 R13C * Braked with reverse automatic system * 13-pin plug with reversing lights * Maintenance-free rubber suspension axles with independent wheel suspension Optional accessories (surcharge applies): * 100 km/h speed conversion for €250 incl. VAT * Mesh extension (60 cm) for €1,299 incl. VAT * Aluminium extension sides for €1,099 incl. VAT * Set of crankable rear support legs for €250 incl. VAT * Aluminium loading ramps (2,800 kg load capacity/pair) for €795 incl. VAT * Steel drop sides (black) instead of aluminium for €295 incl. VAT * High tarpaulin and frame available on request Sales, consultation, and collection in Zell by appointment. Attention: Due to the current material shortages at suppliers, the quoted prices for trailers, accessories, and components may vary due to material surcharges. Subject to prior sale and errors. Please enquire about current availability and final prices. Large selection of new car trailers from brands such as Humbaur, Saris, Böckmann, Stema, Pongratz, Hapert, and WM-Meyer available immediately or at short notice. Also available for online ordering. For transport home, we are happy to provide our transfer license plates for €20. Delivery within Germany available at additional cost!

Stanje: novo, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, Humbaur Three-Way Tipper HTK 3000.31, electrically tiltable Permissible total weight: 3,000 kg Internal body dimensions: 314 x 175 x 35 cm (LxWxH) Equipment: * Electrically tiltable with emergency hand pump * Rear pendulum tailboard * Integrated ramp compartments * Chassis and tipping body welded and hot-dip galvanized * 2 mm galvanized steel floor * 6 recessed lashing rings on the loading platform (800 kg per ring) * 350 mm aluminium sideboards, foldable and removable on all sides * Automatic jockey wheel * Lighting protected in underrun guard * 3-stage telescopic cylinder * Tyres: 195/50 R13C * Braked with automatic reverse function * 13-pin connector with reversing light * Maintenance-free rubber suspension axles with independent wheel suspension Optional accessories (subject to surcharge): * 100 km/h upgrade for €250 incl. VAT * Mesh extension (60 cm) for €1,299 incl. VAT * Aluminium extension sideboards for €949 incl. VAT * Set of crankable rear supports for €250 incl. VAT * Aluminium loading ramps (2,800 kg load capacity/pair) for €795 incl. VAT * High cover and frame upon request Sales, consultation and collection in Zell by appointment. Note: Due to the current material shortages at supplier companies, trailer, accessory and component prices may vary because of material cost surcharges. Subject to prior sale and errors. Please enquire regarding availability and final pricing. Dsdpfx Ajx T R Tzsdqekk Always a large selection of new car trailers of the brands Humbaur, Saris, Böckmann, Stema, Pongratz, Excalibur and WM-Meyer available immediately or at short notice. Also available for online order. For home transport, we will be happy to provide you with our transfer license plate for €20. Delivery within Germany available at extra cost!

Stanje: novo, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, Humbaur Three-Way Tipper HTK 3500.41, electrically tiltable Perm. total weight: 3,500 kg Internal bed dimensions: 410 x 210 x 35 cm (L x W x H) The top model among the Humbaur three-way tippers – with optional loading ramps, ideal for transporting excavators, construction machinery, or cars. Also available as the HTK 3500.41 Tridem three-way tipper with 3 axles for an additional €750 incl. VAT (see images). Equipment: * Electric tipping with emergency hand pump * Rear pendulum tailgate * Integrated ramp compartments * Chassis and tipping platform welded and hot-dip galvanized * 2 mm galvanized steel floor * 8 recessed lashing rings on loading area (800 kg per ring) * 350 mm all-round foldable and removable aluminum side boards * Automatic jockey wheel * Lighting protected in underrun guard * 3-stage telescopic cylinder * 195/50 R13C tires * Braked with automatic reverse system * 13-pin plug with reverse light * Maintenance-free rubber spring axles with independent suspension Optional accessories (for a surcharge): * 100 km/h speed conversion for €250 incl. VAT * Mesh extension (60 cm) for €1,399 incl. VAT * Aluminum extension sides for €1,100 incl. VAT * Set of retractable rear supports for €250 incl. VAT (see images) * Aluminum loading ramps (2,800 kg load capacity/pair) for €795 incl. VAT (see images) * Tridem (3-axle) three-way tipper for an additional €750 incl. VAT (see images) Djdpfxox T R Uxo Adqskk Sales, consultation, and pickup in Zell by appointment only. Please note: Due to the current material shortages from suppliers, trailer, accessory, and component prices may fluctuate due to material surcharges. Subject to prior sale and errors. Please inquire about availability and final prices. We always have a large selection of new car trailers from Humbaur, Saris, Böckmann, Stema, Pongratz, Hapert, and WM-Meyer available immediately or at short notice. Also available for online order. For transport home, we can provide transit license plates for €20. Delivery within Germany available for an extra charge!

Stanje: novo, največja dovoljena obremenitev: 2.600 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, Humbaur Three-Way Tipper HTK 3500.31, Electrically Tippable Permissible total weight: 3,500 kg Internal box dimensions: 314 x 175 x 35 cm (L x W x H) Features: * Electrically tippable with emergency hand pump * Rear drop-down pendulum tailgate * Integrated ramp channels * Chassis and tipper bridge welded and hot-dip galvanized * 2 mm galvanized steel floor * 6 recessed lashing eyes on the loading floor (800 kg per eye) * 350 mm high all-around foldable and removable aluminum drop sides * Automatic jockey wheel Dodpfx Aex T Rz Esdqjkk * Lighting protected within underride guard * 3-stage telescopic cylinder * Tyres: 195/50 R13C * Braked with automatic reverse system * 13-pin plug with reverse lights * Maintenance-free rubber spring axles with independent wheel suspension Optional accessories (surcharge): * 100 km/h upgrade for €250 incl. VAT * Mesh sides (60 cm) for €1,299 incl. VAT * Aluminum extension sides for €949 incl. VAT * Set of crankable rear supports for €250 incl. VAT * Aluminum loading ramps (2,800 kg load capacity/pair) for €795 incl. VAT * High tarpaulin and frame available on request Sales, consultation, and collection in Zell by appointment only. Please note: Due to the current shortage of materials from suppliers, prices for trailers, accessories, and components may vary due to surcharges for increased material costs. Subject to prior sale and errors. Please inquire about availability and final prices. Always a large selection of new car trailers from Humbaur, Saris, Böckmann, Stema, Pongratz, Excalibur and WM-Meyer available immediately or at short notice. Also available to order online. For home transport, we are happy to provide our transfer license plate for €20. Delivery within Germany available for an additional charge!

Stanje: novo, lastna masa: 4.000 kg, največja dovoljena obremenitev: 15.000 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2023, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.410 mm, višina nakladalnega prostora: 800 mm, prostornina tovornega prostora: 10 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 r22,5 zoll, Leto izdelave: 2024, Oprema: ABS, HUMBAUR TANDEM THREE-WAY TIPPER "BULK MATERIAL/GRAVEL TIPPER" TYPE: HTK 195024 "Gravel Tipper" => Permissible total weight: 19,000 kg => Payload: approx. 15,000 kg => Curb weight: only approx. 4 tonnes => HOT-DIP GALVANIZED CHASSIS FRAME - Side walls made of HARDOX HB 450, foldable (spring-assisted lifting optional at extra charge; see below) - Rear wall made of HARDOX HB - Front wall made of fine-grain steel - Central three-side locking - Automatic rear wall release - Electronic air suspension - SAF axles, reinforced CD version, drum brakes - Unladen weight only approx. 4,000 kg - Chassis frame hot-dip galvanized by immersion bath - Side walls KTL + powder-coated in white - KNORR braking system - Drawbar head with “roof shape” - Folding underride guard - Body length: approx. 5,010 mm - Internal width: approx. 2,410 mm (pallet width) - Side wall height: approx. 800 mm (steel) - Ø 50 mm DIN towing eye - 15-pin 24V electrical connector (lighting) - 7-pin EBS connector - SVK-BG3 hydraulic quick-coupler - Compressed air couplings: RED/YELLOW OPTIONALLY AVAILABLE AT EXTRA COST: • Side wall spring-lifting per side = €890 net plus VAT => Delivery freight: €2.90 plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and change!* *Price valid ex works D-86368 Gersthofen* Dedjiciupopfx Adqokk *Sale to business customers only!* *Images may differ and are for general orientation only—may show equipment available at extra charge*

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 06/2023, naslednji pregled (TÜV): 06/2024, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 r 17,5, barva: srebrn, Leto izdelave: 2023, Oprema: ABS, nalagalnik, Three-way Tipper HTK Gala 105024 for Rent! Description 1 day: €150 3 days: €420 1 week: €760 1 month: €2,350 HUMBAUR THREE-WAY TIPPER NEW MODEL 2019 (HTK THROUGH-LOADER / SMB AXLES) => INCLUDING THROUGH-LOADER DESIGN => AUTOMATIC REAR PANEL LOCK RELEASE => Chassis frame HOT-DIP GALVANIZED => Bridge frame HOT-DIP GALVANIZED => Side panels HOT-DIP GALVANIZED Equipment: Permissible total weight: 11,900 kg Payload: approx. 9,200 kg Support load: 500 kg Loading area approx. 5,020 x 2,420 mm Steel side panels approx. 450 mm high Side panel lifting springs (lateral panels) Drawbar FIXED mounted, non-adjustable Reinforced 25 t gearbox support winch (static) with load & fast mode 8 flush-mounted 3 t lashing rings in the loading floor 2 foldable and telescopic supports at the rear (hot-dip galvanized) 2-circuit ABS air brake system Central locking on the side and rear Plastic mudguards with anti-spray protection system Tyres: 4 x 235/75 R17.5 inch 15-pin 24-volt electrical connector for the 24-volt lighting 7-pin 24-volt ABS connector Compressed air connections RED and YELLOW Ø 40 mm DIN towing eye Coupling height approx. 800 mm Hydraulic connection: SVK BG plug Optional extras at additional cost: Stronger brake cylinders and control valves as well as EBS Dodpfon Amrvox Adqskk • 2 aluminum drive-on ramps with 8 t load capacity per pair, including ramp storage compartment • Additional cost: net €2,250 plus VAT • 1 plastic toolbox • Additional cost: net €290 plus VAT Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU

Stanje: novo, lastna masa: 10.400 kg, največja dovoljena obremenitev: 4.000 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, prostornina tovornega prostora: 6,1 m³, vzmetenje: jeklo, velikost pnevmatike: 285/70/19,5, medosna razdalja: 1.260 mm, barva: drugo, Leto izdelave: 2023, Oprema: ABS, SAF axles Maintenance-free parabolic suspension with load equalization ABS braking system according to ECE regulations with ALB function ABS plug connection ISO 7638 Spindle-type parking brake 24 Volt lighting system with multi-chamber rear lights and LED side marker lights Dkjdpfxsggikxs Adqok 15-pin connector plug Fixed drawbar Reinforced 12 ton gearbox support winch with load and fast operation Hydraulic three-way tipping system controlled via towing vehicle Hydraulic quick-release coupling SVK BG3 as single-circuit connection Platform floor made from 4 mm fine-grain steel 4 ball-type tipping bearings with 2 interchangeable tipping bolts Steel side walls, 500 mm high Side and rear walls fold-down and removable, also swinging with central locking Optional extras if required: Ramps with 10 t load capacity per pair: €1,950 + VAT Side underrun protection: €365 + 19% VAT etc. If you require additional accessories, please simply call us at the number below. All prices ex works.

Stanje: novo, lastna masa: 4.300 kg, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, prostornina tovornega prostora: 7,3 m³, vzmetenje: zrak, velikost pnevmatike: 435/50 r19,5 zoll, Leto izdelave: 2023, Oprema: ABS, HUMBAUR TANDEM THREE-WAY TIPPER (HTK UNIVERSAL) With AIR SUSPENSION!!! Chassis frame HOT-DIP GALVANIZED Platform frame HOT-DIP GALVANIZED Side panels HOT-DIP GALVANIZED Dkjdpoiciudjfx Adqsk Equipment: Permissible total weight: 18,000 kg Payload: approx. 13,700 kg Support load: 1,000 kg Loading platform approx. 5040 x 2420 mm Steel side panels approx. 600 mm high Side panel lifting springs for the side walls Fixed drawbar Reinforced 25t (static) gearbox support winch with load and fast gear 5 pairs of 6 t lashing rings recessed in the platform floor 2 foldable and telescopic support legs at the rear of the vehicle (hot-dip galvanized) 2-circuit ABS air brake system Integrated compartment for 2 aluminium loading ramps in the chassis frame Central locking system on sides and rear Plastic mudguards with anti-spray system 4 SPHERICAL TIPPING BEARINGS WIDE tyres, 4 x 435/50 R19.5 inch 15-pin 24 Volt electrical connector for 24 Volt lighting 7-pin 24 Volt ABS connector Compressed air connections RED/YELLOW Ø 50 mm DIN towing eye Coupling height approx. 790 - 1050 mm Hydraulic connection: SVK BG3 plug We optionally offer at extra charge: • 2 aluminium loading ramps, approx. 3570 x 400 mm, load capacity per pair 10,000 kg • Surcharge: net €2,650 plus VAT • 1x plastic toolbox mounted under the loading platform • Surcharge: net €330 plus VAT • Grilles over the rear lights • Surcharge: net €190 plus VAT => Freight costs for delivery: €2.90 plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes!* *Price valid ex D-86368 Gersthofen* *Sale to business customers only!* *Images may differ and are for general guidance only => may include/show optional equipment at extra charge*

Stanje: novo, največja dovoljena obremenitev: 7.500 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.035 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, skupna širina: 2.550 mm, skupna višina: 1.475 mm, Leto izdelave: 2026, Oprema: ABS, * Humbaur three-way tipper * HTK 10 50 24 Dkedpfx Adsqnrtasqjk * Year of manufacture: 2026 * GVW: 10,500 kg * Payload: 7,500 kg * Unladen weight: 3,000 kg * Overall dimensions: 6960 x 2550 x 1475 mm * Deck dimensions: 5035 x 2420 x 500 mm * Steel drop sides: 500 mm high * Infinitely height-adjustable drawbar * 10 recessed lashing rings * 2 rear supports * Electrical and air brake connections on the drawbar * Ramp storage compartment with 2 aluminium loading ramps integrated into the chassis frame * 8 t loading ramps available for an extra charge of €1,499 IMPORTANT NOTICE! PLEASE READ CAREFULLY! We expressly reserve the right of prior sale, as this item is also being offered on other platforms. We strongly recommend an inspection and check to avoid any misunderstandings regarding the condition and suitability for the buyer. Inspections and checks can be arranged at any time by appointment and are expressly encouraged! Images are similar and may show optional equipment subject to an extra charge. Specified internal dimensions are approximate. TRADE-IN POSSIBLE FOR ALMOST ANYTHING!! EXCHANGE DEALS AND TRADE-UPS POSSIBLE!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax: