Stas Prekucnik nakup rabljenega (104)

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Blsdpoy U Syrsfx Amtoi Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2000, skupna dolžina: 10.200 mm, skupna širina: 2.550 mm, skupna višina: 3.500 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 385/65 R22,5, Leto izdelave: 2000, Oprema: ABS, = Dodatne možnosti in oprema = - Listnato vzmetenje = Dodatne informacije = Dimenzija pnevmatik: 385/65 R22,5 Znamka osi: ROR Vzmetenje: Parabolično vzmetenje Lastna masa: 5.880 kg Nosilnost: 32.120 kg DGV: 38.000 kg Bledpozam A Dsfx Amtji Kiper: Zadnji

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.990 kg, največja dovoljena obremenitev: 28.010 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2023, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 2.700 mm, prostornina tovornega prostora: 89 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: bela, Leto izdelave: 2023, Številka objekta # 30572 Cargofloor 10 mm drseča stena Blodpfxsx Art Sj Amtei pnevmatsko zaklepanje vrat Jost osi disk zavore 2x dvižna os pnevmatike 385/65 R 22,5 nadgradnja (notr.): 13.450 x 2.450 x 2.700 mm portalna vrata pomična ponjava platforma z lestvijo Wabco Smart Board z 212.081 km orodjarna delovna luč stranska zaščita proti podvozu nosilec lestve/metle zaščita zadnjih luči dviganje/spuščanje ABS/EBS Jost podporna stojala Leasing ali financiranje možno na zahtevo!!

Stanje: rabljeno, največja dovoljena obremenitev: 27.910 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2014, Oprema: ABS, Nemška prikolica, 1. lastnik, dobro stanje Blsdpfsy Ubg Iox Amtji STAS S 300 ZX Walkingfloor prikolica, CargoFloor tla s kabelskim daljinskim upravljanjem, SAF osi z zavorami na kolutih, 1. os dvižna, portalna vrata z vrtljivim zapahom + pnevmatsko zaklepanje, delovni podest, ponjavnica, 1x plastična orodjarna, nosilec rezervnega kolesa, stopnička zadaj, Wabco SmartBoard, zračno vzmetenje dvig-spust, ABS, EBS, električni priključki 1x 15-polni in 2x 7-polni, itd. Pnevmatike 385 / 65 R 22,5 profil: 14 / 14 / 13 / 11 / 8 / 6 mm Dovoljena skupna masa: 36.000 kg / lastna masa: 8.090 kg / nosilnost: 27.910 kg !!! GOVORIM POLJSKO !!! GOVORIMO ANGLEŠKO !!!

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2005, vzmetenje: zrak, velikost pnevmatike: 385/65, stanje pnevmatik: 40 odstotek, barva: drugo, Leto izdelave: 2005, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje - Kolutne zavore Bljdpfx Amsy Uly Ejtei = Dodatne informacije = Dimenzija pnevmatik: 385/65 Znamka osi: Mercedes Zadnja os 1: Profil pnevmatike: 40% Zadnja os 2: Profil pnevmatike: 30% Zadnja os 3: Profil pnevmatike: 30%

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 06/1995, skupna širina: 2.500 mm, medosna razdalja: 7.060 mm, barva: drugo, Leto izdelave: 1995, Nadgradnja Material: aluminij = Dodatne informacije = Konfiguracija osi Zadnja os 1: Največja dovoljena obremenitev osi: 9.000 kg Zadnja os 2: Največja dovoljena obremenitev osi: 9.000 kg Zadnja os 3: Največja dovoljena obremenitev osi: 9.000 kg Teže Lastna teža: 6.840 kg Nosilnost: 32.160 kg Skupna dovoljena masa: 39.000 kg Funkcionalnost Kiper: zadaj Stanje Tehnično stanje: dobro Vizualno stanje: zelo dobro Poškodbe: nobene Identifikacija Registrska oznaka: OD-66-PN Bljdpfjyy Nvnex Amtsi

Stanje: rabljeno, največja dovoljena obremenitev: 28.155 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2024, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Oprema: ABS, Stas S300CX jekleni kiper v vrhunskem stanju Bjdpfx Amsy I E Ehoteli * SAF osi z zračnim vzmetenjem in kolutnimi zavorami * Prva os je dvižna * Pnevmatske gume 385/65R22.5 * Strešna rolo ponjava * Orodjarna * Rezervoar za vodo * Lestev * Delovni podest z dostopom * Aluminijaste podpornice * Delovne luči * Zadnja vrata z žitnim drsnikom * Smartboard Za več informacij smo vam na voljo.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 05/2021, prostornina tovornega prostora: 92 m³, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, barva: siv, Leto izdelave: 2021, Oprema: ABS, = Additional Options and Equipment = - Alcoa Dura-Bright wheels - Cargo Floor - EBS (Electronic Braking System) - Rear doors - Lifting axle Blsdey Ndnqjpfx Amtji - LED lighting - LED work lights - Alloy wheels - Air suspension - Spare wheel - Rolling tarp cover - Disc brakes = Remarks = Stas Walking Floor Year of manufacture: 07-2021 AS-1 Lift axle AS-3 Lift axle Alcoa Dura-Bright rims Wabco Smartboard 2 stainless steel storage boxes Bulkhead door Spare wheel holder with spare wheel Water tank under chassis = Further Information = Axle configuration Tyre size: 385/65R22.5 Axle make: Mercedes Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; lift axle; max. axle load: 9,000 kg; tyre tread left: 30%; tyre tread right: 30% Rear axle 2: Alloy rims; max. axle load: 9,000 kg; tyre tread left: 30%; tyre tread right: 30% Rear axle 3: Alloy rims; lift axle; max. axle load: 9,000 kg; tyre tread left: 30%; tyre tread right: 30% Weights Unladen weight: 7,890 kg Payload: 34,110 kg Gross vehicle weight: 42,000 kg Condition Technical condition: good Visual condition: very good Damages: none = Company Information = Interested in financing this vehicle? No problem. We can quickly arrange a favourable finance lease agreement for you with a term of 12, 24, 36, 48 or 60 months. All photos and further information can be found at or contact us directly.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 04/2018, prostornina tovornega prostora: 58 m³, skupna dolžina: 11.500 mm, skupna širina: 2.550 mm, skupna višina: 3.830 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 8.710 mm, barva: rdeča, Leto izdelave: 2018, Oprema: ABS, = Further Options and Equipment = - 2x Grain sliders - Alcoa Dura Bright wheels - EBS Bledpfx Ajynanpemtoi - Rear doors - Grain slider - LED lights - LED work lights - Alloy wheels - Steering axle - Air suspension - Roll tarp cover - SAF axles - Disc brakes = Remarks = Stas S300CX Year of construction: 04-2018 AS-3 steering axle 58 m³ volume Alcoa Dura Bright rims 2 grain hatches Wabco Smartboard Storage box LED lighting NL Trailer APK/TUV valid until 20-08-2026 = Further Information = Axle configuration Tyre size: 385/65R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 2: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 3: Alloy rims; Max. axle load: 9,000 kg; Steering; Tyre tread left: 90%; Tyre tread right: 90% Weights Unladen weight: 6,370 kg Payload: 32,630 kg Gross vehicle weight: 39,000 kg Functionality Tipper: Rear Maintenance APK (Technical inspection): valid until 08.2026 Condition Technical condition: very good Visual condition: very good Damages: none Identification Registration: OR-05-GZ Further Information Please contact John Hesselink or Christel Hesselink for more information. = Company Information = Interested in financing this vehicle? No problem. We can arrange an affordable finance lease contract for you, with terms of 12, 24, 36, 48 or 60 months. All photos and further information can be found at or contact us directly.

Stanje: rabljeno, številka stroja/vozila: 1, lastna masa: 8.000 kg, največja dovoljena obremenitev: 30.000 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2005, naslednji pregled (TÜV): 10/2020, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.700 mm, prostornina tovornega prostora: 92 m³, vzmetenje: zrak, velikost pnevmatike: 385.65 r 22.5, barva: rdeča, Leto izdelave: 2005, Oprema: ABS, dvižna zadnja plošča, STAS 92m³ moving floor semi-trailer with 21 slats, ideal for waste transport, equipped with adjustable, sealed hydraulic tailgate and a closed roof covering 2/3 of the trailer. Features 3 disc-braked axles with steerable third axle, front platform, model year 2005, inspected until 31.10.2020. Official dealer: INTERDRIVE SRL, Parma. Bledpfx Aeh I Id Nsmtoi

Stanje: rabljeno, lastna masa: 6.340 kg, skupna masa: 39.000 kg, Leto izdelave: 2002, Oprema: ABS, STAS SA339K/ALU Year of manufacture: 2002 3 axles ABS Bodpfx Amjvdru Ajtjli Air suspension Gross weight: 39,000 kg Unladen weight: 6,340 kg

Stanje: rabljeno, lastna masa: 5.635 kg, skupna masa: 36.000 kg, Leto izdelave: 2015, Oprema: ABS, STAS / ALU / TARPAULIN Year of manufacture: 2015 2 axles Unladen weight: 5,635 kg Gross weight: 36,000 kg ABS EBS Bsdpovdrtlofx Amtoli

Stanje: rabljeno, konfiguracija osi: 3 osi, barva: siv, Leto izdelave: 2000, Stas S 3SA 334K Letnik: 2000 3-osni Zračno vzmetenje Ponjava Bedsyda Tdopfx Amtsli 2 nosilca Lastna teža: 5.260 kg Skupna dovoljena masa: 38.000 kg = Dodatne informacije = Lastna masa: 5.260 kg Nosilnost: 32.740 kg Skupna dovoljena masa: 38.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2015, Oprema: ABS, Stas S3 SA334K Letnik izdelave: 2001 3 osi Zračno vzmetenje Ponjava 2 x podpori Lastna teža: 5.260 kg Dovoljena skupna masa: 39.000 kg Bsdpfxoydarge Amteli = Dodatne informacije = Prazna masa: 5.260 kg Nosilnost: 33.740 kg Skupna dovoljena masa: 39.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2008, Stas S 339 CX Letnik: 2008 3-osni Zračno vzmetenje Ponjava 2 x opori Lastna teža: 4.890 kg Največja dovoljena masa: 39.000 kg = Dodatne informacije = Lastna teža: 4.890 kg Nosilnost: 34.110 kg Bedpfx Aoyc U Uaomtsli Skupna dovoljena masa: 39.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2001, Stas S3 SA334K Letnik izdelave: 2001 3 osi Zračno vzmetenje Ponjava 2 x podpori Lastna teža: 5.260 kg Dovoljena skupna masa: 39.000 kg = Dodatne informacije = Prazna masa: 5.260 kg Bodpfxsyda E Ho Amteli Nosilnost: 33.740 kg Skupna dovoljena masa: 39.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2000, Stas S 3SA 334K Leto izdelave: 2000 3-osni Zračno vzmetenje Ponjava 2 x podporni nogi Lastna teža: 5.260 kg Največja dovoljena masa: 38.000 kg Bledsydb R Rspfx Amtoi = Dodatne informacije = Prazna teža: 5.260 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, barva: siv, Leto izdelave: 2008, Oprema: ABS, Stas S 339 CX Letnik izdelave: 2008 Zračno vzmetenje 3-osni Ponjava 2 x podporni nogi Polkrožni prekucnik = Dodatne informacije = Lastna teža: 6.800 kg Nosilnost: 32.200 kg Bledjydavxopfx Amtsi Dovoljena skupna masa: 39.000 kg

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.636 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39t) Axles and suspension: "Disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with start assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension, Wabco Trailerpulse tire pressure monitoring system with ZF wheel-mounted sensors Blodpofakkcofx Amtoi Tires and wheels: 6 wheels with 385/65 R 22.5 tires (manufacturer's choice), Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120, kingpin screwed into a 10 mm thick plate Landing legs: aluminum drop landing legs, 2 x 10t support load, aluminum pivoting feet used for air suspension Brake system: compliant with E.G. standards, two-line braking system, Wabco EBS electronic system with RSS (Roll Stability Support), spring-actuated braking system acting on two axles with control at the rear, aluminum air tank system, premium modulator Electrical system: compliant with StVZO, with 2 LED five-chamber Aspöck Europoint taillights integrated into aluminum rear, 24V system with 1x 5-pin and 2x 7-pin sockets, LED side marker lights, 2 separate LED work lamps at the rear, 2 LED work lamps at the height of the landing gear, 1 LED work lamp inside front left, operable from outside Superstructure / Body: "Interior fully welded" Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN, aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with top and bottom rails, plank profiles inside fully welded, floor as moving floor system installed over 140 mm aluminum cross beams, floor load approx. 7 t/m², cross beams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles beveled, smooth straight rear wall with 2 aluminum swing doors 50/30 mm thick with 4 locking bars integrated into a welded aluminum rear frame mounted in Teflon and stainless steel bearings; following wall made of reinforced top aluminum rail with Kevlar curtain for complete emptying, side brush seal and additional Kevlar side curtain, integrated discharge chute with foldable closing plate at rear left, externally operable, inspection window rear left, 1 sampling gate per rear door (total 2), service door front left Hydraulic system: "Cargo Floor" moving floor system in the floor with hydraulically driven aluminum profiles on aluminum square tubes with approx. 670 PE-HD gliders, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and model to be specified, operating pressure 190–240 bar max., aluminum end pieces welded into the floor, electric controls at rear left with cable remote in a lockable waterproof box Accessories: PVC mudguards with rubber mud flaps, aluminum spare wheel holder, foldable aluminum side underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m aluminum ladder, roll tarp 680g/m² quality with roll tarpaulin system incl

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Bledpfxsyh S Ais Amtsi Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Bedpfefi Nmwox Amtsli Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 40 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle lift with traction aid and electric operation, raise & lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" king pin bolted into a 10mm plate, mechanical landing gear with single-side operation, braking system per EEC standard, Westinghouse two-line system, spring brakes on two axles and EBS electronic system Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per StVZO with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, Edbro hydraulic system with approx. 2m hydraulic hose, 6 PVC mudguards with rubber mud flaps, lateral underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber seal, spindle locks on the tailgate, prepared for vibrating plate, mud-tight! ADDITIONAL EQUIPMENT AVAILABLE TO ORDER AS REQUESTED COLOR FREELY CHOOSABLE +590€ delivery costs *Pictures and offers non-binding* Bljdou Dvw Eopfx Amtoi

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Bljdpfx Asfi Nmpemtsi Offer and pictures subject to confirmation

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Bledpsgcw Rijfx Amtei Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.880 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, traction aid, and electric operation, raising and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with unilateral operation, braking system according to EEC standards, two-line system, spring actuators acting on two axles, EBS electronic brake system by Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system in accordance with StVZO regulations, 2 five-chamber tail lights (Aspöck type), 24-volt system, aluminum tipper body, Edbro brand hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, continuous sealing rubber, spindle locks on the rear door; tipper body optionally also available with mud-tight seal! Bedpfou Dvw Ssx Amteli Combination tailgate, split 2/3-1/3, with grain chute and automatic pneumatic locking. FURTHER EQUIPMENT AVAILABLE ON REQUEST COLOR FREELY CHOICEABLE +€590 delivery costs Also available in versions Z9-Z13 *Images and offers subject to change*