Stas Polpriklopniki nakup rabljenega (116)

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Duedpfx Aefi Nmpef Ujl Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2019, * Dvigalna os * ALU platišča Dsdew Rit Tepfx Af Uoul * JOST ose * Drsna ponjava * Lastna teža: 7.760 kg -----Interna številka vozila: 10296----Pridržujemo si pravico do napak in vmesne prodaje

Stanje: novo, največja dovoljena obremenitev: 30.050 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.664 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 52 m³, Leto izdelave: 2025, * Wabco EBS-E (electronic braking system with RSS) * Emergency release unit for spring brake cylinders * Disc brakes * Brake pad wear indicator (not connected) * Tire pressure monitoring system (Wabco Trailerpulse) * Wabco Smart-Board * 3 x 9 t SAF axles * Air suspension with lifting and lowering system (automatic lowering during tipping operation – can be manually locked via SmartBoard or by switch on the chassis) * First and third axles are automatic lift axles, controlled via EBS-E system * Starting aid is activated via a button in the truck – without need for truck-side installation – or by pressing the brake pedal three times * Aluminum air tank Dusdpfx Ajwgg Uzsf Uol * Weweler crank landing gear * Side underrun protection * Foldable underride guard with handle * 2 x 7-pin and 1 x 15-pin sockets * Aspöck LED lighting * 2 LED reversing lights (switched via reverse gear) * One LED worklight on each side in the area of the landing gear * Speedline Diamond aluminum rims * Left side: 1 plastic toolbox approx. 860 x 520 x 500 mm * Air gun with 16 m hose reel in the toolbox * Closed plastic single mudguards * 1 dust bag including holder on the right side * 3 m aluminum leaning ladder stored on the right above the mudguards * Shovel and broom holder on the left above the mudguards * Loading pressure gauge mounted at the front of the chassis * Aluminum chassis frame * Aluminum rear tipper body – rectangular – with smooth side walls * Hyva hydraulic cylinder, 250 bar * Straight 4 mm aluminum front wall * Entry steps mounted inside the body, left side at the front wall * Smooth side walls, inside and out * Double-walled 600 mm side wall profiles – 30 mm thick – 3 mm inside and 2 mm outside * Side wall profiles are continuously welded on the inside, with 90° corners formed with right-angled profiles between floor and side walls – allowing full use of the floor width * Top rail 90 mm wide * 6 mm wear-resistant aluminum floor in 110 Brinell quality * Combination double swing doors – set straight with double door hinges and reinforcement profiles, each with grain sluice and all-round rubber seal * When doors are open, they are secured by chain – keeping the doors as flat as possible against the side walls * 4-point lower door locking hooks open automatically during tipping – can be pneumatically locked via lever on the frame * Roll tarp – in RAL 9005 deep black – with 3 lateral tensioning straps * Trapezoidal tarp support, 150 mm high, at the front wall and tailgate * Access and standing platform mounted at the front on the frame * Loading volume: 51.8 m³ * Superstructure and chassis painted with acrylic finish in RAL 9005 deep black * --Gross vehicle weight technically possible: 39,000 kg-- * Saddle height: 1,150 mm * New vehicle without initial registration, with manufacturer warranty * Subject to errors and prior sale * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 34.200 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.820 mm, prostornina tovornega prostora: 91 m³, Leto izdelave: 2025, Oprema: ABS, Stock no. 5628 New vehicle in stock – available immediately! Purchase, rental, or lease with purchase option by arrangement! Stas 91 m² Moving Floor / 10 mm Ribbed Floor / TÜV Load Certificate / Front Service Door / Galvanised Chassis – Manufacturer: Stas – Model: Biostar – Moving Floor Duodpfoxhbcgox Af Ujl – Year of manufacture: 2025 – Gross technical weight: 42,000 kg – Unladen weight (manufacturer's information): 7,800 kg – Payload: 34,200 kg – Suspension: Air suspension with raise/lower ECAS – Axles: 3x Jost, 1st axle liftable with starting aid / disc brakes – Tyres: 385/65 R22.5 on Speedline Diamond aluminium rims – EBS – Colour: Body white RAL 9010 / Tarp black SIO7999 – Volume: approx. 91 m³ (13.50 m long x 2.47 m wide x 2.82 m high) – Double-wing rear doors with pneumatic locking – Extendable step ladder, right side – Lift axle starting aid via truck button – Smartboard – Telescopic landing legs – PVC toolbox 830 x 500 x 470 mm – 2 LED reversing lights, rear left and right – 2 LED reversing lights on rear supports – 1 LED front wall interior light – Ecoled 2 LED tail lights – Cargo Floor 10 mm ribbed floor CF500SL-C -E Control – Radio remote control – Moving side wall – Rolling tarpaulin with tension belts Panama 900 g/m² – Side protection tarpaulin – Tarpaulin stops – Front service door NEW VEHICLE! Purchase, rental, or lease with purchase option by arrangement! Notice regarding potential errors in this advertisement: Despite careful preparation of this advertisement, errors may occur in the description or details provided. We accept no liability for mistakes, amendments, or interim sales. All information provided is without guarantee. Please contact us to verify details or discuss further questions.

Stanje: rabljeno, največja dovoljena obremenitev: 28.150 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2019, naslednji pregled (TÜV): 11/2025, prostornina tovornega prostora: 92 m³, Leto izdelave: 2019, Oprema: ABS, * Stas 3-axle Walking Floor S300ZX * 10 mm floor * approx. 92 m³ * Radio remote control * Roll tarp * Air suspension * 2x lift axles * Disc brakes * JOST axles Dujdjw H Hprepfx Af Uol * EBS * ABS

Stanje: rabljeno, lastna masa: 6.340 kg, skupna masa: 39.000 kg, Leto izdelave: 2002, Oprema: ABS, STAS SA339K/ALU Year of manufacture: 2002 3 axles ABS Air suspension Djdpfx Aovdru Aof Usul Gross weight: 39,000 kg Unladen weight: 6,340 kg

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.880 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, traction aid, and electric operation, raising and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with unilateral operation, braking system according to EEC standards, two-line system, spring actuators acting on two axles, EBS electronic brake system by Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system in accordance with StVZO regulations, 2 five-chamber tail lights (Aspöck type), 24-volt system, aluminum tipper body, Edbro brand hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, continuous sealing rubber, spindle locks on the rear door; tipper body optionally also available with mud-tight seal! Combination tailgate, split 2/3-1/3, with grain chute and automatic pneumatic locking. Dedpfxeu Dvw Sj Af Uoul FURTHER EQUIPMENT AVAILABLE ON REQUEST COLOR FREELY CHOICEABLE +€590 delivery costs Also available in versions Z9-Z13 *Images and offers subject to change*

Stanje: rabljeno, skupna masa: 39.000 kg, prva registracija: 01/2013, naslednji pregled (TÜV): 07/2025, Oprema: ABS, Volume tipper 59 cubic meters All-aluminium construction Dedpfxovwhvpo Af Uoul Unladen weight: 7,570 kg SAF axles with disc brakes Tyres: 60% tread remaining Good condition Belgian registration Price: €23,900 net

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 01/2001, vzmetenje: jeklo, barva: bež, Leto izdelave: 2001, Brand of axles: ROR Suspension: Leaf suspension Unladen weight: 4,620 kg Payload: 28,380 kg Gross vehicle weight: 33,000 kg Tipper: Rear Djdpfx Aowl Rcmsf Uoul Technical condition: Very good Optical condition: Very good Please contact Thierry Leemans for further information.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2013, dolžina tovornega prostora: 8.400 mm, širina tovornega prostora: 2.390 mm, višina nakladalnega prostora: 1.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 1.310 mm, Leto izdelave: 2013, Tyre size: 385/65R22.5 Suspension: Air suspension Drive: Axle Unladen weight: 5,590 kg Dusdpfswzkx Tox Af Uol Payload: 33,410 kg Gross vehicle weight: 39,000 kg Body manufacturer: STAS Tipping: Rear

Stanje: rabljeno, največja dovoljena obremenitev: 33.110 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2015, prostornina tovornega prostora: 46 m³, Oprema: ABS, Stas 3-axle grain tipper trailer, approx. 46 m³ capacity, portal doors with 2 grain chutes, rollover tarpaulin, platform, air suspension, lift axle, disc brakes, BPW axles, aluminium rims, Wabco SmartBoard, EBS, ABS. Dujdpfow Er Rrox Af Uel

Stanje: rabljeno, lastna masa: 5.635 kg, skupna masa: 36.000 kg, Leto izdelave: 2015, Oprema: ABS, STAS / ALU / TARPAULIN Year of manufacture: 2015 2 axles Unladen weight: 5,635 kg Gross weight: 36,000 kg ABS EBS Dsdpfx Afovdrtle Ueul

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Duedpfx Afegcw Ris Ujl Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: rabljeno, največja dovoljena obremenitev: 29.630 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2012, naslednji pregled (TÜV): 09/2025, prostornina tovornega prostora: 55 m³, Leto izdelave: 2012, Oprema: ABS, * Stas 3-axle grain tipper trailer * Type S300CX * Approx. 55 m³ capacity * Doors * Grain discharge slider * Air suspension * Lift axle * Mercedes axles * Disc brakes * Aluminium rims * Wabco SmartBoard * Roll tarpaulin * Platform Duodowciu Aepfx Af Usl * EBS * ABS

Stanje: novo, največja dovoljena obremenitev: 28.840 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.660 mm, širina tovornega prostora: 2.250 mm, višina nakladalnega prostora: 2.350 mm, prostornina tovornega prostora: 50 m³, Oprema: ABS, STRONG & LIGHT, now also available for heavy-duty applications, from 40 m³ loading volume and 6,600 kg. High-quality aluminium chassis with high-strength steel body, ACTUAL 7,160 KG. Chassis with 3x 9t DCA axles, equipped with 430 mm disc brakes, 6x steel rims, 1st axle as a lift axle with starting aid, aluminium drop-down landing legs (can be decoupled when loaded), foldable underrun protection, digital load gauge for axle load indication, toolbox, access ladder. Body made from HB450 steel sheets, floor 5 mm thick, side walls and rear doors made from 4 mm HB450 steel sheets. Rear doors split 1/2 - 1/2 with a grain chute on the right, rear doors can be unlocked from the rear, doors sealed with round steel bar (optionally with rubber seal – mud-tight), roll tarp with central support tube, aluminium splash guard to protect the roof tarpaulin during loading, platform mounted on the frame, EdBro tipping cylinder with long casing, loading height = 3,650 mm. (The vehicles shown are partly equipped with special options) Further equipment details and a comprehensive vehicle quotation are available upon request. Various loading volumes, vehicle lengths, and heights are possible. Painting and equipment according to customer specifications. Dedpehfiqcsfx Af Ueul +€500 delivery charge Offers and images are subject to change.

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Dedpfxefi Nmws Af Ueul Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection