Stas S Polpriklopniki nakup rabljenega (115)

Stanje: rabljeno, največja dovoljena obremenitev: 34.130 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 10.149 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 55 m³, skupna širina: 2.550 mm, skupna višina: 3.822 mm, Leto izdelave: 2024, Oprema: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "X-Shape" First registration: 10/2024, Condition: Like NEW Mileage: 62,270 km Internal dimensions (LxWxH): 10,149 x 2,350/2,450 x 2,285 mm (tapered design in width) Unladen weight: only 7,820 kg Z-chassis in cranked design Continuous 5 mm Hardox steel (HB450) floor Front wall and side walls: 4/3 mm Hardox steel (HB450) Slanted front wall with internal ascent 2-wing portal doors, pneumatic post-unlocking GRAIN SLIDE with dust protection bag Reinforced roof roll tarpaulin HYVA tipping cylinder, Alpha type, suitable for high and low pressure Full-load crank landing gear 2x air vibrators mounted underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a LIFT AXLE with starting aid WABCO Trailer EBS with RSS anti-skid system WABCO Smartboard Automatic tipping lowering device Raise and lower mechanism Tires 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminum rims Hjdpfxjyl Tfvo Af Asi Aluminum access ladder Shovel and broom holder Toolbox on the right 4x LED reversing spotlights RENTING is the new BUYING: with us, immediately available also under FULL-SERVICE RENTAL-----

Stanje: rabljeno, največja dovoljena obremenitev: 29.020 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2005, dolžina tovornega prostora: 10.560 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 1.900 mm, Oprema: ABS, id: 692731 DVIŽNA OS, 50 m³ Za več informacij pokličite: , +????? ?? ????? ???? ????? ???: 420734511212 Hodex Ia Rxopfx Af Aei

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2006, Zračno vzmetenje Dvižna os Hsdpfx Afeyl Navs Aei Takoj pripravljeno za uporabo

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2010, prostornina tovornega prostora: 80 m³, Leto izdelave: 2010, Oprema: ABS, 19.750 EUR neto, SAF osi, kolutne zavore, alu-alu, ponjava, francoska registracija, v dobrem stanju Hedpfx Afjynp Rtj Aoi

Stanje: zelo dobro (rabljeno), številka stroja/vozila: YA9S343A897116027, prva registracija: 05/1997, barva: drugo, Leto izdelave: 1997, = Dodatne informacije = Lastna masa: 8.280 kg Hodpoympz Njfx Af Asi Nosilnost: 25.720 kg Skupna masa: 34.000 kg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2005, prostornina tovornega prostora: 80 m³, Leto izdelave: 2005, Oprema: ABS, 15.750 EUR neto, SAF osi, kolutne zavore, alu-alu, ponjava, francoski dokumenti, v dobrem stanju Hedpfsymuplex Af Aji

Stanje: rabljeno, številka stroja/vozila: YE6SZ339V600R0459, konfiguracija osi: 3 osi, prva registracija: 07/2006, dolžina tovornega prostora: 13.350 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.750 mm, skupna dolžina: 13.950 mm, skupna širina: 2.500 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: drugo, Leto izdelave: 2006, = Další možnosti a příslušenství = - Hydraulika = Poznámky = Podvozek Výška podvozku: 100 cm Výška čepu/ojí: 120 cm Konstrukce Hydraulika: ✓ Nádrž Palivo: ✓ = Další informace = Konfigurace náprav Rozměr pneumatik: 385/65 R22.5 Značka náprav: Mercedes Brzdy: Kotoučové brzdy Pérování: Vzduchové pérování Náprava 1: Vzorek pneu vlevo: 65 %; Vpravo: 10 % Náprava 2: Vzorek pneu vlevo: 75 %; Vpravo: 15 % Náprava 3: Vzorek pneu vlevo: 70 %; Vpravo: 15 % Hmotnosti Provozní hmotnost: 7 960 kg Užitečné zatížení: 31 040 kg Celková hmotnost vozidla: 39 000 kg Funkčnost Značka nástavby: Stas Výška ložné plochy: 110 cm Hsdpfx Asu H Di Isf Aoi Identifikace SPZ: QAZ297 = Informace o firmě = Pro více informací o tomto vozidle volejte nebo pište e-mail: Přehled celého skladu najdete na: Nezapomeňte se přihlásit k odběru našeho newsletteru – každý týden aktualizace nabídky.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2021, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 53 m³, Chassis, Light Version Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width 1,600 mm. Axles and Suspension Disc brakes 430 mm, "off-road version" SAF Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, centrally mounted to the chassis longitudinal beam, 1st axle with liftable air bellows, starting aid function and manual forced lowering, Smart Board info center, lowering valve, front load pressure gauge. Tyres and Wheels on Aluminum Rims 6 wheels with tires 385/65 R 22.5 approx. 50%, 11.75 x 22.5 ET 120, UNI wheel bolts for aluminum rims. Kingpin 2" screwed into an 8 mm thick "light" plate Hsdeyiw T Eopfx Af Asi Landing Legs Support winches, loadable to 2x20 t, with swiveling base for air suspension Brake System Built according to E.G. standards, dual-line Wabco system, spring-actuated parking brake affecting two axles, Wabco EBS-E with RSS (roll stability system), Wabco Smartboard Info Center, aluminum air tank system. Electrical System According to STVZO guidelines, with 3 round three-chamber lamps type Aspöck, 24V system with 2 x 7-pin and 1 x 5-pin sockets, 2 x 7 side outline markers, 2 LED reversing lamps centrally at the rear, 1 round fog lamp, 4 LED work lamps, 1 interior LED lamp, 4 red LED position lamps in the door bar. All air and electrical lines are neatly routed in plastic tubing! Tipper Body / Body “Smooth Design”, Body Interior Fully Welded Aluminum tipper body, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded. Floor 8 mm high-wear-resistant alloy (5383H34/HB 110) with 90-degree profile to the side wall. Front wall 4 mm reinforced, straight design. Tailgate as universal door, straight version, with two half-and-half swing doors and grain chute. Universal door operated automatically-pneumatically, lockable via separate lever, rear portal in aluminum, swing-away, two hold-downs with rubber buffers on the tipper body, fixed to the front wall. Hydraulics, Tipping Cylinder with “Sleeve” Suspension Hydraulic cylinder mounted on the front wall, working pressure 150 bar, Edbro make, with approx. 2.5 m hydraulic hose and quick coupling 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete splash flaps across full vehicle width mounted on underrun protection, no aluminum spare wheel holder, side underrun protection right, foldable version, large toolbox type 860, approx. 3 m aluminum ladder, 3 aluminum swing bars mid, approx. 150 mm raised with additional middle support, roll tarp with central light strip and separate reinforcements in wear areas, approx. 660 g/m² quality, roll tarp system with fast tension closure, surrounding rubber cord at rear edge of tarp with two catch hooks to be fixed on the rear swing bar, catwalk on frame, tarp closure at rear with welded-in rubber cord for water ingress protection, robust foldable underrun protection, 2 "Clear-Pass" mud flaps to EG standard mounted on mudguards, side-mounted on the frame an aluminum grain funnel with drawstring bag, brackets for shovel, broom, and scraper mounted over axles, etc… Unladen weight: 5,950 kg Offer and images subject to change.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2013, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 46 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm Axles and suspension Disc brakes 430 mm "off-road version" SAF-Intradisc light axle assemblies 3 x 9 t with SAF air suspension, central-positioned air bellows on chassis longitudinal member, 3rd axle liftable with starting aid and manual forced lowering, Smart Board info center, lift-lower valve, BVA brake wear indicator Tyres and wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70 % remaining tread, with silver steel rims, 11.75x22.5 ET 120, UNI wheel bolts King pin 2" – screwed into an 8 mm thick plate Landing gear Mechanical landing legs with 2 speeds, 2x20t support load, with swing foot for air suspension, Brake system According to E.E.C. standard, two-line system Wabco, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-stability-system), Wabco Smartboard Info Center, aluminium air reservoir system Electrical system According to German Road Traffic Licensing Regulations (StVZO) with 2 five-chamber lights type Aspöck, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly routed in plastic conduits Tipper body/smooth body design, interior fully welded Aluminium tipper body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded. Floor 6 mm thick high-wear-resistant alloy (5383H34/HB 110), with 45-degree angled profile to side wall. Front wall 4 mm, reinforced, angled design. Rear wall as universal door in straight design, with two-leaf doors (2/3-1/3 split) and one grain slide, ALU round profile welded to seal the door gap on the rear doors, side and bottom. Rear doors partly covered with smooth aluminium sheeting. Universal door operation is automatic-pneumatic with separate lever lock, rear swing bar in aluminium, two hold-downs with rubber buffer fixed to the tipper body at the bulkhead. Hydraulic system Tipping cylinder with "Rotulen"-mounting (light) Hjdpfx Afeyiw T Sj Aoi Hydraulic cylinder mounted at the front wall with 150 bar working pressure, brand Edbro, approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flaps across the entire vehicle width fixed to underrun protection, no spare wheel holder (aluminium), foldable side underrun guard (right), large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing bows approx. 150 mm raised in the centre, an additional centrally mounted bow holder for positioning in total 2 bows to increase loading width, rolling tarpaulin with central light strip and separate reinforcements in wear areas, 660 g/m2 quality with rolling tarp system, all-around elastic rope on rear closure of tarpaulin with two hooks fixed to the swing bow at rear, catwalk on chassis in chassis colour with steps left and right, side tarp closure with quick lock, rear tarp closure with welded elastic rope for water resistance, robust foldable underrun guard in aluminium, 2 "Clear Pass" mud flaps at mudguard to EC standard, side-mounted on frame one aluminium grain funnel with sack, brackets for shovel, broom and scraper mounted above axles, etc. Curb weight: 5,960 kg Offer and images non-binding

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2008, Stas S 339 CX Letnik: 2008 3-osni Zračno vzmetenje Ponjava 2 x opori Lastna teža: 4.890 kg Hsdpfx Ajyc U Uaof Asi Največja dovoljena masa: 39.000 kg = Dodatne informacije = Lastna teža: 4.890 kg Nosilnost: 34.110 kg Skupna dovoljena masa: 39.000 kg

Stanje: novo, največja dovoljena obremenitev: 30.050 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.664 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 52 m³, Leto izdelave: 2025, Braking System: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes * Brake pad wear indicator (not connected) Hodpfx Aowgg Uzsf Aei ----Axles: * 3 x 9 t SAF axles * 1st and 3rd axles are automatic lift axles, controlled via the EBS-E system ----Suspension: * Air suspension with lifting and lowering function (automatic lowering during tipping – can be manually blocked via SmartBoard or by switch on the chassis) ----Electrics / Lighting: * Tire pressure monitoring system (Wabco Trailerpulse) * Wabco Smart-Board * Start assist activated via button in the truck – no truck-side installation required – as well as by pressing the brake pedal three times * 2 x 7-pin and 1 x 15-pin sockets * Aspöck LED lighting * 2 LED reversing lights (activated via reverse gear) * 1 LED work light each on the side at the support legs ----General Equipment: * Aluminum air tanks * Weweler crank landing gear * Side underrun protection * Folding underrun guard with handle * Speedline Diamond aluminum rims * 1 x plastic toolbox on left side approx. 860 x 520 x 500 mm * Air blow gun with 16 m hose reel in toolbox * Closed single plastic mudguards * 1 dust bag incl. holder on right side * 3m aluminum ladder stored on right above mudguards * Shovel and broom holders on left above mudguards * Load pressure gauge mounted at the front of the chassis * Access steps and standing platform mounted at the front of the frame ----Chassis: * Aluminum chassis frame ----Tipping Body: * Aluminum rear tipping trough – rectangular – with smooth side walls * Hyva hydraulic ram, 250 bar * Straight 4 mm aluminum front wall * Steps mounted on inside of the left front wall of the body * Smooth side walls inside and outside * Double-walled 600 mm sidewall profiles – 30 mm thick – 3 mm inside and 2 mm outside * Side wall profiles continuously welded inside, 90° corners with right-angled profile between floor and side walls – ensures the full floor width can be used * Top rail 90 mm wide * 6 mm wear-resistant aluminum floor with 110 Brinell quality * Combination double-wing rear doors – upright, with double hinges and reinforcement profiles, each with grain shoot and all-round rubber seal * When doors are open, they are fixed by chains to lie flat against the side walls * Fourfold lower door locking hooks automatically open during tipping – can be pneumatically locked using valve on the frame ----Roll Cover: * Roll tarp – in RAL 9005 deep black – with three side tension belts * Trapezoidal tarp support 150 mm high on front wall and rear tailgate ----Load Volume: * Load volume 51.8 m³ ----Fifth Wheel Height: * Fifth wheel height 1,150 mm ----Info: * Superstructure and chassis painted with acrylic paint in RAL 9005 deep black * --Permissible gross weight of 39,000 kg technically possible-- * New vehicle without initial registration, with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/1996, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: drugo, Leto izdelave: 1996, Axle configuration Tyre size: 385/65 R22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Axle make: BPW; Tyre tread right: 7 mm Rear axle 2: Axle make: SAF; Tyre tread left: 5 mm; Tyre tread right: 6 mm Rear axle 3: Axle make: SAF; Tyre tread left: 7 mm; Tyre tread right: 8 mm Weights Unladen weight: 7,220 kg Payload: 30,780 kg Gross vehicle weight (GVW): 38,000 kg Hjdpfjygf Acox Af Aoi Condition Damages: none

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2006, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: drugo, Leto izdelave: 2006, Konfiguracija osi Dimenzija pnevmatik: 385/65 R22.5 Znamka osi: BPW Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: profil pnevmatike levo: 10 mm; profil pnevmatike desno: 5 mm Zadnja os 2: profil pnevmatike levo: 10 mm; profil pnevmatike desno: 5 mm Zadnja os 3: profil pnevmatike levo: 12 mm; profil pnevmatike desno: 10 mm Teže Lastna teža: 6.110 kg Nosilnost: 32.890 kg Skupna dovoljena masa: 39.000 kg Stanje Hjdpfx Ajygfl Dsf Asi Poškodbe: nobenih

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2015, prostornina tovornega prostora: 50 m³, Leto izdelave: 2015, Oprema: ABS, 23.500 EUR neto, kolutne zavore, utor za kolute, alu-alu, univerzalna vrata, velika vrata, ponjava, belgijska registracija Hodpfx Afeyd Ab Rj Asi

Stanje: rabljeno, lastna masa: 5.635 kg, skupna masa: 36.000 kg, Leto izdelave: 2015, Oprema: ABS, STAS / ALU / TARPAULIN Hodpsvdrtljfx Af Aji Year of manufacture: 2015 2 axles Unladen weight: 5,635 kg Gross weight: 36,000 kg ABS EBS