Feldbinder Polpriklopniki nakup rabljenega (133)

Stanje: novo, konfiguracija osi: 3 osi, prostornina tovornega prostora: 35 m³, skupna širina: 2.550 mm, skupna višina: 3.940 mm, Leto izdelave: 2026, Oprema: ABS, O.ME.P.S Silo Trailer – Type: CM 35 (Horizontal Silo) Axles and Suspension: Disc brakes 22.5", SAF axle assemblies 3x 9t with air suspension, axle spacing is 2 x 1310 mm, raising and lowering valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring, first axle liftable without tractor equipment, third axle liftable with Wabco Optiturn. Dedex Nufyspfx Adqekk Wheels and Tyres: 6 wheels with 385/65 R22.5 tyres, as per manufacturer’s selection mounted on Alcoa Ultra One aluminium rims, size 11.75x22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic braking system with RSS, in accordance with standard 98/12/CE - ECE R13/09, brake pad wear indicator connected. Landing Legs: Mechanical landing legs with two speeds, 2x 20t support load with pivoting foot. Electrical System: All lighting in LED design, 24 Volt electrical installation consisting of: a 15-pin socket mounted in front of the fifth wheel on the chassis beam, yellow side marker lights in the required number, rear position lights, front marker lights, rear license plate lights, lighting as per standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights mounted at the height of the pivot bearing in aluminium brackets as per standard 97/28/CE-2007/35/CE, 2 rotatable LED work lights on the upper left and right sides of the container, yellow warning light at the rear mounted at hose pipe level, 2x reverse lights in the underrun protection, 2x reverse lights at support leg height (each can be switched off on the energy console). Tank Construction: A horizontal tank made of aluminium alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). A single-chamber tank with 35,000 ltr. capacity, tank warranty: 24 months from delivery. Kingpin 2” as per standard 94/20/CE. Operating Parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80°C. Filling Options: 3 manholes DN 450 with hinged and foldable domed covers. Dome covers are closed pressure-tight with 4 wing nuts each, support for domed covers on top for storage, rain gutter in front closed – rear open. Material Outlet: 2 material discharge cones with synthetic fabric as a fluidization insert, individual discharge pipes DN 100 made of steel routed to the rear, 2 pinch valves DN 100 AKO in the pipes, final ball valve DN 100 with ring nozzle, remote control for the final ball valve and Storz A coupling at the end of discharge line. Air Piping: One 2.5” stainless steel air manifold installed on the RIGHT operating side. The airline is routed forward, up to the end of the silo with non-return valve and connecting hose DN 65 for compressor with Storz-B coupling. The air manifold has ball valves for top air, auxiliary air and fluidization. Top air 2” at rear right, PRESSURE PIPE INLET REAR RIGHT, external air connection Storz C at air pipe rear RIGHT, pneumatic connection with blow-off gun and spiral hose on top walkway in the area of the access ladder, 1x vibrator on top of the tank, air line at the top centre of the walkway for cleaning with pistol, air line at the bottom in the storage box for cleaning with pistol. Ladder and Access: 1 aluminium ladder is mounted at the rear left of the vehicle, 1 pneumatic aluminium safety scissor railing with locking system connected to the brake, 1 alumin...

Stanje: novo, prostornina tovornega prostora: 60 m³, skupna širina: 2.550 mm, skupna višina: 3.930 mm, Leto izdelave: 2026, Oprema: ABS, OMEPS Tipping Silo Semi-Trailer----Type: CR 60 Chassis: Two fully automatic welded I-beam main longitudinal members with welded cross members, chassis width 1,400 mm, 2" kingpin; tipping cylinder: Hyva Axles and Suspension: Disc brakes 22.5", SAF axle assemblies 3x 9t with air suspension, axle spacing 2 x 1310 mm; lift and lower valve, loading pressure gauge mounted at the top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring; 1st axle liftable without tractor unit, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with 385/65 R22.5 tires, brand at manufacturer’s discretion, on Alcoa Dura Bright aluminum rims, 11.75x22.5 offset 120 Braking System: EBS 4S/2M WABCO pneumatic braking system with RSS, according to standard 98/12/CE - ECE R13/09; connected brake pad wear indicator Landing Gear: Mechanical landing gear with two speeds, 2x 20t carrying capacity with tilting feet; rear with crank supports Electrical System: All lights in LED version; 24 volt electrical installation consisting of: One 15-pin socket in front of the fifth wheel mounted on the chassis beam, yellow side marker lamps as required, rear position lamps, front marker lamps, rear license plate lamps, lights according to standard 97/28/CE-2007/35/CE; 2 multi-chamber lamps at the height of the turntable mounted in aluminum brackets according to standard 97/28/CE-2007/35/CE; 1 LED work lamp on the tank; yellow warning lamp at the rear, mounted at the height of the hose pipes; 2x reversing lights on the underrun protection, 2x reversing lights at the height of the support legs (each switchable on the energy console) Dksdpfx Adox Nugdjqek Tank Specifications: A horizontal tank fabricated from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn); single-chamber tank with 60,000 liters capacity, tank warranty: 24 months from delivery Operating Parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE; wall thickness approx. 5 mm; test pressure 3.0 bar, operating pressure 2.0 bar; operating temperature -40°C to +80°C Loading Options: 5 manholes DN 450 with pivoting and foldable dome covers; each secured pressure-tight with 4 wing nuts; rubber supports for dome cover storage on top; rain gutter closed at the front, open at the rear Material Discharge: 1 material outlet cone DN 800 made of stainless steel, foldable, with INOX disc for loosening; material outlet cone can pivot laterally; shut-off valve DN 150 with white seal; connection: STORZ-A Air Piping: A 2.5'' stainless steel air collection pipe installed on the right operator side; a 4" stainless steel air distribution pipe mounted at the rear of the tank; air valves (shut-off valves) in stainless steel; top air and air connection hoses with 2" STORZ couplings; micron filter; vacuum valve on top of tank; 1x vibrator 1 meter in front of the turntable Ladder and Walkway: 1 aluminum ladder mounted rear left on the vehicle; 1 aluminum safety scissor rail with a separate folding ladder part deployable from below and a parking brake when opened; 1 aluminum safety walkway guided on the left along the top of the tank; anti-slip coating on the tank Delivery Hose Storage: 4 hose pipe holders, 5 m length DN 200 made of aluminum, with 4 hoses DN 100 and STORZ couplings; hose holder with compressor hose D.76 Accessories: The side underrun protection is in anodized aluminum version

Stanje: novo, skupna širina: 2.550 mm, skupna višina: 3.960 mm, Leto izdelave: 2026, Oprema: ABS, O.ME.P.S Tipping Silo Semi-Trailer – Type: CR 47 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva. Axles and Suspension: 22.5" disc brakes, SAF axle assemblies 3x 9t with air suspension, axle spacing 2 x 1,310 mm, lift and lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tyre pressure monitoring, first axle liftable (without tractor unit equipment), third axle liftable with Wabco Optiturn. Wheels and Tyres: 6 wheels with tyres size 385/65 R22.5, manufacturer’s choice on Alcoa Dura-Bright aluminium rims, size 11.75 x 22.5 ET 120. Braking System: EBS 4S/2M WABCO compressed air brake system with RSS, in accordance with Standard 98/12/CE - ECE R13/09, brake wear indicator connected. Landing Gear: Mechanical landing gear with two speeds, 2x 20t support load with swiveling foot, without rear support. Electrical System: All lights in LED design, 24 Volt electrical installation consisting of: a 15-pin socket mounted in front of the skid plate on the chassis member, yellow side marker lights in required quantity, rear position lights, front outline lights, rear license plate lights, lights according to Standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights at the pivot bearing mounted in aluminium as per Standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at the rear (mounted at hose tube height), 2x reverse lamps on underrun protection, 2x reverse lamps at support height (each individually switchable from the energy console). Dksdpfxox Nuftj Adqok Tank Design: A horizontal tank made of aluminium alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-compartment tank with 47,000 litre capacity, tank warranty: 24 months from delivery. Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Filling Options: 4 manholes DN 450 with swiveling and folding domed covers. Each cover is pressure-tight with 4 wing nuts, rubber support for domed covers on top for storage, rain rail closed to the front – open at the rear. Discharge: 1 discharge cone DN 800 made of stainless steel (INOX), foldable with INOX disc for discharge aid, discharge cone can swing laterally, shut-off valve DN 150 with white seal, connection STORZ-A. Compressed Air Piping: A 2.5" stainless steel air manifold mounted on the right-hand side, a 4" stainless steel air distribution pipe at the rear of the tank, air valves (shut-off valves) in INOX, top air hose and air connection hoses with 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m before the pivot bearing. Ladder and Walkway: 1 aluminium ladder mounted at the rear left of the vehicle, 1 aluminium safety scissor railing with a separate deployable ladder section and parking brake when open, 1 aluminium safety catwalk on the left upper side of the tank, anti-slip coating on the tank. Hose Storage: 4 hose tube containers, 5 m long, DN 200 made of aluminium with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76. Accessories: The side underrun protection is made of anodised aluminium finish...

Stanje: rabljeno, lastna masa: 3.800 kg, največja dovoljena obremenitev: 14.200 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/1999, prostornina tovornega prostora: 31 m³, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: rumena, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Location: Bovenden, 2 axles, BPW axles, turntable steering, air suspension, ABS (anti-lock braking system), underrun protection, side aluminium underrun protection. Dksdsvhkitopfx Adqek Body: 2-axle silo trailer for powdered and free-flowing goods with 4x domed lids, approx. 31m³. Pressure vessel inspection renewed in June 2022! Next external inspection due: 03/2024! Next internal inspection due: 03/2026! ACCESSORY SPECIFICATIONS SUBJECT TO CHANGE, Errors, prior sale and amendments excepted!

Stanje: rabljeno, največja dovoljena obremenitev: 27.700 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2002, prostornina tovornega prostora: 57 m³, skupna širina: 2.550 mm, skupna višina: 3.995 mm, Oprema: ABS, Feldbinder KIP 57.3 silos za prahove in sipke materiale s 3 osmi, cca 60 m³ Dksdpfx Aotvh T Todqok Nosilnost: 27.700 kg Os: SAF Zavore: bobnaste Podporne točke: 4x !!! Ponudimo lahko tudi ležeč Feldbinder priklopnik !!! Z veseljem vam pomagamo tudi pri financiranju/leasingu preko naših partnerjev. Vse informacije brez garancije. Pridržujemo si pravico do napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 14.000 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2009, naslednji pregled (TÜV): 06/2025, Oprema: ABS, Feldbinder HEUT 31.2 2-axle silo trailer, BPW axles, disc brakes, air suspension, 4x sliding covers, ABS Unladen weight: 4,000 kg Dedpfxjvud Hxe Adqjkk Gross permitted weight: 18,000 kg

Stanje: rabljeno, največja dovoljena obremenitev: 29.900 kg, skupna masa: 37.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2009, prostornina tovornega prostora: 45 m³, Leto izdelave: 2009, Oprema: ABS, * Feldbinder three-axle tipping silo with compressor and tipping hydraulics system * Volume: 45 m³ * Air suspension * Lift axle * SAF axles * Aluminium rims Dksdpfxswqmddo Adqsk * EBS (Electronic Braking System) * ABS (Anti-lock Braking System)

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 10/2008, barva: drugo, Leto izdelave: 2008, Os 1: levo 8 mm, desno 8 mm Os 2: levo 8 mm, desno 8 mm Os 3: levo 10 mm, desno 10 mm = Dodatne informacije = Dkedpfexvy S Njx Adqsk Lastna masa: 6.500 kg