Stas Prekucnik nakup rabljenega (111)

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Duedofi Nmpspfx Acfsu Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.880 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, traction aid, and electric operation, raising and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with unilateral operation, braking system according to EEC standards, two-line system, spring actuators acting on two axles, EBS electronic brake system by Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system in accordance with StVZO regulations, 2 five-chamber tail lights (Aspöck type), 24-volt system, aluminum tipper body, Edbro brand hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, continuous sealing rubber, spindle locks on the rear door; tipper body optionally also available with mud-tight seal! Duodpfx Aeu Dvw Sscfeu Combination tailgate, split 2/3-1/3, with grain chute and automatic pneumatic locking. FURTHER EQUIPMENT AVAILABLE ON REQUEST COLOR FREELY CHOICEABLE +€590 delivery costs Also available in versions Z9-Z13 *Images and offers subject to change*

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Dujdpfx Acegcw Rijfou Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: novo, največja dovoljena obremenitev: 28.840 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.660 mm, širina tovornega prostora: 2.250 mm, višina nakladalnega prostora: 2.350 mm, prostornina tovornega prostora: 50 m³, Oprema: ABS, STRONG & LIGHT, now also available for heavy-duty applications, from 40 m³ loading volume and 6,600 kg. High-quality aluminium chassis with high-strength steel body, ACTUAL 7,160 KG. Chassis with 3x 9t DCA axles, equipped with 430 mm disc brakes, 6x steel rims, 1st axle as a lift axle with starting aid, aluminium drop-down landing legs (can be decoupled when loaded), foldable underrun protection, digital load gauge for axle load indication, toolbox, access ladder. Body made from HB450 steel sheets, floor 5 mm thick, side walls and rear doors made from 4 mm HB450 steel sheets. Rear doors split 1/2 - 1/2 with a grain chute on the right, rear doors can be unlocked from the rear, doors sealed with round steel bar (optionally with rubber seal – mud-tight), roll tarp with central support tube, aluminium splash guard to protect the roof tarpaulin during loading, platform mounted on the frame, EdBro tipping cylinder with long casing, loading height = 3,650 mm. Duedpfxjhfiqcj Acfeu (The vehicles shown are partly equipped with special options) Further equipment details and a comprehensive vehicle quotation are available upon request. Various loading volumes, vehicle lengths, and heights are possible. Painting and equipment according to customer specifications. +€500 delivery charge Offers and images are subject to change.

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2019, * Dvižna os * ALU platišča * JOST osi * Pomikajoča cerada Dodpfx Acsw Rit Tofouu * Lastna teža: 7.760 kg -----Interna številka vozila: 10296----Pridržujemo si pravico do napak in vmesne prodaje Podpora preko WhatsAppa na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa.

Stanje: novo, največja dovoljena obremenitev: 30.050 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.664 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 52 m³, Leto izdelave: 2025, Braking System: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes * Brake pad wear indicator (not connected) ----Axles: * 3 x 9 t SAF axles * 1st and 3rd axles are automatic lift axles, controlled via the EBS-E system ----Suspension: * Air suspension with lifting and lowering function (automatic lowering during tipping – can be manually blocked via SmartBoard or by switch on the chassis) ----Electrics / Lighting: * Tire pressure monitoring system (Wabco Trailerpulse) * Wabco Smart-Board * Start assist activated via button in the truck – no truck-side installation required – as well as by pressing the brake pedal three times * 2 x 7-pin and 1 x 15-pin sockets * Aspöck LED lighting * 2 LED reversing lights (activated via reverse gear) * 1 LED work light each on the side at the support legs ----General Equipment: * Aluminum air tanks * Weweler crank landing gear * Side underrun protection * Folding underrun guard with handle * Speedline Diamond aluminum rims * 1 x plastic toolbox on left side approx. 860 x 520 x 500 mm * Air blow gun with 16 m hose reel in toolbox * Closed single plastic mudguards * 1 dust bag incl. holder on right side * 3m aluminum ladder stored on right above mudguards * Shovel and broom holders on left above mudguards * Load pressure gauge mounted at the front of the chassis * Access steps and standing platform mounted at the front of the frame ----Chassis: * Aluminum chassis frame ----Tipping Body: * Aluminum rear tipping trough – rectangular – with smooth side walls * Hyva hydraulic ram, 250 bar * Straight 4 mm aluminum front wall * Steps mounted on inside of the left front wall of the body * Smooth side walls inside and outside * Double-walled 600 mm sidewall profiles – 30 mm thick – 3 mm inside and 2 mm outside * Side wall profiles continuously welded inside, 90° corners with right-angled profile between floor and side walls – ensures the full floor width can be used * Top rail 90 mm wide * 6 mm wear-resistant aluminum floor with 110 Brinell quality * Combination double-wing rear doors – upright, with double hinges and reinforcement profiles, each with grain shoot and all-round rubber seal * When doors are open, they are fixed by chains to lie flat against the side walls * Fourfold lower door locking hooks automatically open during tipping – can be pneumatically locked using valve on the frame ----Roll Cover: Duedpfx Acewgg Uzefju * Roll tarp – in RAL 9005 deep black – with three side tension belts * Trapezoidal tarp support 150 mm high on front wall and rear tailgate ----Load Volume: * Load volume 51.8 m³ ----Fifth Wheel Height: * Fifth wheel height 1,150 mm ----Info: * Superstructure and chassis painted with acrylic paint in RAL 9005 deep black * --Permissible gross weight of 39,000 kg technically possible-- * New vehicle without initial registration, with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2017, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 13.179 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.800 mm, Oprema: ABS, * Stas premična tla * Pokrivna ponjava * ALU platišča Duedpfx Acoxu Th Uefeu * SAF osi * Lastna teža: 7790 kg * Leto izdelave: Interna številka vozila: 11498-----Pridržane so napake in vmesna prodaja

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 13.435 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.690 mm, * JOST axles * Air suspension Dujdpfov Hlwijx Acfeu * Lift axle * Wabco SmartBoard * Storage box * Aluminum rims * Tarpaulin cover -----Internal vehicle number: 10290----Subject to errors and prior sale.

Stanje: rabljeno, lastna masa: 11.245 kg, skupna masa: 36.000 kg, Leto izdelave: 2009, Oprema: ABS, STAS/ALU/TIPPER Dusdjvdrt Sjpfx Acfou Year of manufacture: 10/2009 2 axles Gross weight: 36,000 kg Unladen weight: 11,245 kg ABS

Stanje: novo, največja dovoljena obremenitev: 28.240 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.820 mm, prostornina tovornega prostora: 91 m³, Oprema: ABS, Stock No. 5559 New vehicle in stock – available immediately! Purchase, rental, or rent-to-own options available by arrangement! Side tarpaulin retrofittable at extra cost! Stas 91 m² moving floor trailer / 10 mm flat floor / TÜV load certification ---- * Manufacturer: Stas * Model: BIOSTAR - Moving Floor * First registration: - (new vehicle) * Colour: Galvanized chassis, body RAL 7016 silver grey, tarpaulin SIO 7340 * Volume: approx. 91m³ (13.50 m length x 2.475 m width x 2.64–2.82 m height) * Gross weight: 36,000 kg * Unladen weight (vehicle registration): 7,760 kg * Payload: 28,240 kg * Axles: 3x SAF axles / 1st axle liftable / traction aid / disc brakes * Tyres: 385/65 R22.5 new on Speedline Diamond aluminium rims * Wheelbase: 7.85 m * Suspension: ECAS air suspension with raise/lower function * ABS / EBS * Cargo Floor CF 500 SL-C with remote control and control box rear left * 21 floor boards, 10 mm flat * 12 pairs of recessed lashing rings in the floor * End caps made of welded aluminium * Complete discharge wall with brushes and stainless steel handles * Service door in the front wall Duedpfev Emk Usx Acfeu * Swing doors (50/50) with pneumatic locking * 2x locking rods * Pivoting cross member for door closure * Hydraulic connections at the front with 3 m hoses and * Connection possibility below the body without hoses * Operating platform with access front left * Fifth wheel height: 1,150 mm * Single wheel arches * Full-load support legs * Rear aluminium lighting guard (single-piece, foldable) * Roll tarp (900g/m²) with tension belts * Steel roof bows, folding, and lengthwise tension belts * 1x toolbox rear left * 1x aluminium ladder, 3.80 m long * Load pressure gauge * Smartboard * TPMS tyre pressure monitoring system * Aluminium underrun protection bumper at rear * 1x pull-out ladder, rear right * 2x LED work lights in front of the axles * 2x LED reversing lights, rear * 1x LED work light front wall, inside * 2 x 3-function lights in the top door cross member New vehicle in stock – available immediately! Purchase, rental, or rent-to-own options available by arrangement! Note regarding possible errors in the listing: Despite careful preparation, errors may have occurred in the text or specifications. We assume no liability for errors, changes, or intermediate sales. Information provided without guarantee. Please contact us to verify details or for further questions.

Stanje: novo, največja dovoljena obremenitev: 29.560 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Oprema: ABS, Stock no. 5640 Purchase, rent, or rent with a purchase option by arrangement! Approx. 60m³ STAS agricultural moving floor trailer with integrated grain hopper / service door, etc. ---- * Manufacturer: STAS * Model: FARMSTAR – Agricultural Moving Floor Trailer * First registration: - (new vehicle) * Colour: Chassis RAL 9005, Body RAL 7001, Tarpaulin SIO 7500 * Capacity: approx. 60m³ (10.60m long x 2.48m wide x 2.30m high) * Axles: 3x SAF axles / 1st axle lift axle + traction aid / disc brakes * Tyres: 385/65 R22.5 with Speedline Diamond aluminium rims * Wheelbase: 6.25 m * Suspension: Air suspension with raise and lower function * Gross weight: 36,000 kg * Unladen weight (manufacturer’s spec): 6,440 kg * Payload: 29,560 kg * ABS / EBS * CARGO FLOOR CF 500 SL-C with radio remote control and rear left operating console * 21-board floor system, 6 mm ribbed * Welded aluminium end caps * Rear closure plate in aluminium * Integrated grain hopper * Additional guides under the floor profiles * Residue discharge wall with brushes and stainless steel handles * Front wall made of aluminium plank profiles * Service door in front wall * Side walls with smooth finish inside and out (grain specification), fully welded * Observation window on left rear side wall * Swing doors (50/50) * 4x locking rods Dodpfxjxl Ntuj Acfjuu * Swivelling cross member at the door closure * Hydraulic connections front with 3 m hoses and * Connection possibility under body without hoses * Pressure 1" female * Return 1" female * Operator’s platform with steps front left and right * Fifth wheel height: 1,150 mm * Single wheel mudguards * Heavy-duty landing legs * Rolling tarpaulin (900g/m²) with quick-lock system * Foldable aluminium roof bows * Foldable aluminium rear light protection * Aluminium air tanks * 1x toolbox front left * 1x toolbox rear right * Shovel and broom holder left * 1x aluminium step ladder, 2x 8-steps, mounted right * 1x extendable ladder at rear, right side * Smartboard * TPMS tyre pressure monitoring system * 5-chamber LED tail lights * 2x LED work lights in front of axles * 2x LED reversing lights rear * 1x LED work light, front wall interior * 2 x 3-function lamps installed in upper door cross member Purchase, rent, or rent with a purchase option by arrangement! Notice regarding possible errors in the listing: Despite careful creation of the listing, there may occasionally be errors in the text or details provided. We accept no liability for errors, changes, or prior sale. All information is without guarantee. Please contact us to verify details or for further inquiries.