Unsinn 3 To Tandem Uba 3030-14-1800 Rampen Baumaschinen nakup rabljenega (51.997)

Stanje: rabljeno, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2019, dolžina tovornega prostora: 3.090 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 1.800 mm, prostornina tovornega prostora: 10 m³, * 20560 - ID vozila za telefonska povpraševanja * 3t tandem prikolica, prikolica za gradbene stroje * Tip: UBA 3030-14-1800 * Kroglična kljuka * Inercialna zavora * Nastavljive rampe * Pocinkano * Shranjevalni zaboji * Ponjavni nadgradnja ----naš e-poštni naslov:     naše storitve za vas: Hodpfx Agey Sdv Ts Ijfg       - Pridobitev začasnih ali carinskih tablic       - Prevoz / dostava po celotni EU       - Carinjenje vozil za tretje države Če imate vprašanja v ruskem jeziku, lahko pokličete na naslednjo številko * WhatsApp samo za rusko govoreče: * WhatsApp za angleški, nemški in druge jezike:

Stanje: rabljeno, največja dovoljena obremenitev: 2.680 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 06/2017, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, Unsinn UBA 3536-14-1800: Notranje dimenzije: 3,63 m D x 1,80 m Š x 0,30 m V Hjdpfx Asxdpuvog Iofg * 3500 kg dovoljena skupna masa

Stanje: novo, Three-way tipper with E-pump & cordless screwdriver pump, loading ramps and support stands Manufacturer: Unsinn Type: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3500 kg Unladen weight: approx. 905 kg Payload: approx. 2595 kg (Payload may vary depending on equipment and configuration) Electrohydraulic pump with emergency pump function 'Pumpless', allowing tipping via cordless screwdriver in case of low battery Integrated battery charger with 230 V plug Battery and pump unit are securely stored and protected from dirt in the battery compartment Aluminium loading ramps, 2560 x 300 mm, load capacity 2800 kg per pair Integrated ramp compartment with tensioning device and foldable license plate holder for storing the ramps under the loading platform Robust drop-down support legs Unique, torsion-resistant longitudinal chassis frame for improved driving stability and safety Closed, fully welded and hot-dip galvanized steel frame profile Solid steel floor running the full width of the vehicle Maintenance support for securing the tilted platform Reinforced automatic jockey wheel Maneuvering handle with practical strap reel for easy handling Cargo securing system for increased flexibility and efficiency, DEKRA certified 10 recessed lashing rings mounted in the steel floor Lashing points on and under the loading floor, each rated up to 1500 kg and rotatable 360° Sidewalls fully foldable and removable Rear sidewall, steel-plated, foldable with anti-slip lock for loading ramps Robust cam lever locks on the sidewalls 4 removable steel corner posts Lighting system with 13-pin connector and reverse light Hfodpfx Asy I Eu Neg Isg Including vehicle documents Optional features and accessories for this trailer: - Sidewall extension - Mesh extension - Load securing net - Anti-theft device - Registration of your new trailer with the vehicle registration authority

Stanje: novo, največja dovoljena obremenitev: 2.380 kg, skupna masa: 620 kg, Leto izdelave: 2024, Information in English Unsinn UB 3016-30-14 (previous designation: UBA 3030-14-1600) Premium low-loader for transporting construction machinery, 2,380 kg payload, 3,000 kg gross vehicle weight, Loading area: 3,060 x 1,600 x 300 mm, 2 laterally swiveling and width-adjustable aluminium loading ramps with integrated ground support, Loading ramps can be swiveled to the side, 10 pairs of lashing points, Hfedevw I Tbspfx Ag Iog Spoon rest optional. The construction machine shown is not included in the scope of delivery. Errors and prior sale reserved! Further information External dimensions: 0.00306 x 0.0016 x 0.3 m Country of manufacture: DE Please contact Philip Müller, , p-) for more information.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Vehicle Data – Certificate of Conformity (GTP 35) Manufacturer: Unsinn Fahrzeugtechnik GmbH Type: GTP 35 Variant: 3.V. Version: E.T.M.K.3.R.1 Hsdswywyzjpfx Ag Isfg Trade Name: UDK 3030-14-1750 Vehicle Category: O2 Vehicle Identification Number (VIN): WUF2H5800S0217734 Date of Manufacture: 07.03.2025 Type Approval Location: e12007/4601164*04 Permissible Speed: 140 km/h — Dimensions • Axles: 2 / 4 • Wheelbase: 3292 mm • Axle spacings: • 1st-2nd axle: 2572 mm • 2nd-3rd axle: 720 mm • Length: 4530 mm • Width: 1930 mm • Height: 1100 mm • Distance from centre of coupling to rear: 4492 mm • Loading platform length: 3060 mm • Rear overhang: 1200 mm — Weights • Curb weight (ready-to-drive): 489 kg • Axle 1: 232 kg • Axle 2: 232 kg • Technically permissible total weight: 3000 kg • Axle 1: 1500 kg • Axle 2: 1500 kg • Axle group 1: 3000 kg • Technically permissible drawbar load: 100 kg — Tyres and Rims • Wheel/tyre combination (e.g., standard equipment): 185R14C 104N on 5.5Jx14 ET30 • Permissible combinations according to notes: 195R14C, 185R14C, 185/60R12C, 195/60R12C, 195/50R13C – with various rim sizes (e.g., 5.5Jx14, 6Jx14, 5.5Jx13, etc.) Offset (ET): 25–35 mm — Towing Device • Approval number: E1 55R-011594 Add.02 • Ratings: • D-value: 26.9 kN • Static vertical load (S): 325 kg — Brakes, Body, Equipment • Brake: Mechanical • Body code: DC10 • TPMS (Tyre Pressure Monitoring System): No • Shock absorbers required for 100 km/h approval • Not certified according to UN ECE R 155/156 --- All information subject to change — illustrations may differ —

Stanje: rabljeno, lastna masa: 3.130 kg, največja dovoljena obremenitev: 8.770 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 09/2013, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17.5, Leto izdelave: 2013, Oprema: ABS, Nemško vozilo 2-osni tandem kiper prikolica 3 S – olje Skupna masa: 11.900 kg Nosilnost: 8.770 kg Lastna masa: 3.130 kg Jeklena nadgradnja: 5 m x 2.440 x 500 mm Proizvajalec: Wörmann Velikost pnevmatik: 235/75 R17.5 Dodatne storitve so mogoče! Izvozne tablice (rdeče / 30 dni) Nemčija Kratkoročne tablice (rumene / 5 dni) Nemčija Hfjdoy Eynxopfx Ag Ijg Avstrijske prevozne tablice je mogoče urediti Dostava vozila (proti doplačilu) Podatki na spletu so nezavezujoči opisi. Ne predstavljajo zagotovljenih lastnosti. Prodajalec ni odgovoren za napake, tipkarske napake ali napake pri prenosu podatkov. Vmesna prodaja pridržana. Prodaja samo pravnim osebam. Veljajo izključno naši splošni pogoji poslovanja.

Stanje: rabljeno, lastna masa: 3.450 kg, največja dovoljena obremenitev: 9.450 kg, skupna masa: 13.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2021, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 380 mm, vzmetenje: jeklo, velikost pnevmatike: 245/70 R17.5, Leto izdelave: 2021, Oprema: ABS, Nemško vozilo Znamka: Möslein Tip: DTT 13 Tandemska nizkopodna prikolica, dolžina 5,2 m + klančina 1 m, skupno 6,2 m Premične rampe Listnato vzmetenje Gigant osi Dovoljena skupna masa: 13.000 kg Lastna masa: 3.450 kg Nosilnost: 9.450 kg Velikost pnevmatik: 245/70 R 17,5 Hjdpfjy Eyl Dsx Ag Ijfg Možna dodatna storitev! Izvozne tablice (rdeče / 30 dni) Nemčija Kratkoročne tablice (rumene / 5 dni) Nemčija Možnost posredovanja prevoznih tablic Avstrija Dostava vozil (za doplačilo) Podatki na internetu so neobvezujoč opis. Ne predstavljajo zagotovljenih lastnosti. Prodajalec ne odgovarja za napake, slovnične napake ali napake pri prenosu podatkov. Vmesna prodaja pridržana. Prodaja izključno pravnim osebam. Veljajo izključno naši splošni pogoji.

Stanje: novo, največja dovoljena obremenitev: 16.750 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release mechanism for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lift and lower function * Mounting points in front of bulkhead and rear slope for retrofitting container locks (for 20" containers) * Drawbar with 50 mm flange towing eye, height-adjustable * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lighting * 21 t GVW version with reinforced frame and axles * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood flooring, clamped design * Mounting provision for container locks in front of bulkhead * Bolted smooth sheet front wall * Split steel side walls, trapezoidal profile, foldable with center folding stake * Steel rear panel, insertable between the ramps (bracket for storage inside the front wall when not in use) * Rear stanchions, bolted * Perforated outer frame, bent approx. 45 degrees, 2 t lashing capacity every 480 mm * Optional installation of 3 t folding lashing rings every 600 mm * Profifix lashing rail, longitudinal axis center, lashing capability up to LC 3000 daN * In each front and rear corner: 1 x 10 t lashing ring * Lashing package: each side 2 x 8 t retractable lashing rings in outer frame, various holes for 1.2 t lashing in front and rear cross members * One-piece mechanical grating drive-on ramps with spring system for single-person operation, approx. 3,000 x 620 mm (retractable to 20 mm) * Rear chassis approach angle approx. 860 mm * Drawbar, front wall, tailgate, folding supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoirs and landing gear painted black * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Side wall painting in RAL color of choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion * New vehicle with manufacturer’s warranty Hodpsq Dyu Uofx Ag Iefg * Subject to errors and prior sale * Available from CW 29 / 2026

Stanje: rabljeno, največja dovoljena obremenitev: 11.000 kg, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2013, dolžina tovornega prostora: 5.000 mm, Interna številka: B - 08 Po naročilu stranke Obermeier * ECO Tip 100 * Tristrani prekucnik * Dvoosni * Široke pnevmatike * Nastavljiva vlečna kljuka * Dovoljena skupna masa 11.000 kg * V dobrem stanju Možna menjava staro za novo Financiranje od 3,99 % Pridržujemo si pravico do napak in vmesne prodaje! Podatki v tem oglasu so nezavezujoč opis in ne predstavljajo jamčenih lastnosti. Prodajalec ne prevzema odgovornosti za napake pri tipkanju ali prenosu podatkov. Oprema, navedena v oglasu, je predmet ločenega preverjanja. Vse informacije v oglasih so nezavezujoče! Hsdpfsxvf U Aox Ag Iofg Dostava po celotnem območju Nemčije po dogovoru Delovni čas: ponedeljek do četrtek od 9:00 do 17:00 Petek od 9:00 do 14:00 in po dogovoru!

Stanje: novo, Posebna cena! Vozilo na zalogi iz leta 2023! Brez prve registracije! 9931820 Spustni priklopnik / Priklopnik za motorna kolesa Proizvajalec: Unsinn Tip: UA 2615-14-13 Mere: 2600 x 1550 x 150 mm D.Š.V. Dovoljena skupna masa: 1400 kg Hfedjy I Tfpjpfx Ag Ijg Lastna masa: cca 370 kg Nosilnost: cca 1030 kg Amortizerji na kolesih, vključno z dovoljenjem za 100 km/h Nakladalna površina hidravlično spuščajoča Avtomatsko podporno kolo 6 trdnih privezovalnih ušes na nakladalni površini Obročasta perforirana jeklena ograja – številne dodatne možnosti pritrjevanja 13-polni priključek Obročne luči Vključno z dokumentacijo vozila Možne možnosti in dodatna oprema za ta priklopnik: Rezervno kolo z nosilcem Zaščita proti kraji Registracija novega priklopnika na prometnem uradu

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * External, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right exterior on the bulkhead * Lateral underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet steel bulkhead * Drop sides made of trapezoidal-profiled steel, foldable with drop-side lifting aid * Rear wall made of steel, can be inserted between ramps - storage bracket inside in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing ring * Various holes in the front and rear cross members for 1.2 t lashing points * Profifix lashing rail along the center longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: Hfjdpjq Dyvvofx Ag Isg * Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall * Drop side color in RAL 9010 pure white * Painting of the side walls in any RAL shade available at extra cost ----Information: * --Reinforced and certified body to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 29/2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with compensating unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (tire pressure monitoring system) * LED lighting ----General attachments: * Jost landing leg at the front * Externally mounted, hot-dip galvanized drop-down support legs at the rear * Plastic toolbox, mounted front right on the bulkhead * Side impact protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted bulkhead in smooth sheet metal * Trapezoidal profile steel side walls, foldable with side wall spring assist * Steel rear wall, slidable between the ramps – storage bracket inside the bulkhead when not in use * Screwed-in rear stanchions ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings possible every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear cross members for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis (center), lashing option up to LC 3,000 daN ----Ramps: * Single-piece mechanical mesh approach ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed down to 20 mm) * Rear drive-up angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear panel Hjdpfxsrvvfle Ag Iefg * Side wall color RAL 9010 pure white * Painting of the side walls in a different RAL color available at extra cost ----Information: * --Reinforced and certified construction according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 29/2026

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: Hfjdpfx Aev Eq Evsg Ieg ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm, up to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting ----General Attachments: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Fittings for retrofitting container locks in front of the headboard and rear slope for the transport of 20" containers * Bolted headboard, smooth sheet * Side walls: folding, split once in the middle, made of trapezoidal sheet metal * Steel rear wall, can be inserted between ramp holders, stored in front of the headboard when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing ring in each of the front and rear corners * Various holes in headboard and end beam for 1.2 t lashing options * Profifix lashing rail in longitudinal axis, central, for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm clearance) * Rear approach slope approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, headboard, tailgate, folding supports and drive-on ramps hot-dip galvanized * Axles, springs, air tank, flange towing eye and support winch painted in black * Side wall panels painted in a RAL colour of your choice (except special or metallic paints), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Available from approx. week 30 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes Hfedpfx Aov D Tcbeg Isg ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power plug * LED lighting ----General Fittings: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation before the bulkhead and rear slope for retrofitting container locks for the transport of 20" containers * Bolted bulkhead made of smooth sheet steel * Side walls made of trapezoidal-profiled steel, folding design, divided centrally * Steel rear wall, can be inserted between the ramp brackets, stowed inside in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Slotted outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Optionally, installation of 3 t folding lashing rings every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing point * Various holes for 1.2 t lashing options in the bulkhead and rear crossmember * Profifix lashing rail along the centerline for lashing options up to LC 3000 daN ----Ramps: * One-piece mechanical grid approach ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach slope approx. 860 mm chassis height ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, bulkhead, rear panel, folding supports, and approach ramps hot-dip galvanized * Axles, springs, air tank, flange drawbar eye, and support winch painted in black * Side wall paint in a RAL color of your choice (special or metallic paints not available), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified construction according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. week 30 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring-loaded brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm total length * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at front * Externally mounted, hot-dip galvanized folding support legs at rear * Plastic toolbox, mounted front right exterior on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolt-on smooth sheet steel bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assist * Insertable steel rear wall between ramps – storage bracket for unused rear wall inside in front of bulkhead * Bolt-on rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each corner at front and rear * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps, spring-assisted for single operator use, approx. 2,750 x 600 mm (retractable to 20 mm) * Rear ramp approach slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps and rear wall * Drop side color in RAL 9010 pure white * Side wall paintwork in any RAL color available at extra charge ----Information: * --Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: Hedjxglibopfx Ag Iofg * Available from approx. CW 27/2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: Hfsdexglh Ropfx Ag Ijg * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (tire pressure monitoring system) * LED lighting ----General attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted externally on the front wall * Side underrun protection * Plastic quarter mudguards ----Low-bed platform: * 50 mm softwood floor * Fittings in front of front wall for optional installation of container locks * Bolted smooth sheet metal front wall * Fold-down trapezoidal profile steel side panels with sideboard spring lifters * Steel rear wall, retractable between ramps—when not in use, bracket mounted inside in front of the front wall * Rear stanchions bolted ----Load securing: * Perforated external frame, ca. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * In each of the four corners at front and rear, one 6.3 t lashing ring * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single-person operation, ca. 2,750 x 600 mm (can be collapsed to 20 mm) * Approach angle at the rear approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front wall, loading ramps, and rear wall * Drop side color in RAL 9010 pure white * Painting of the side panels in a RAL color of your choice available at extra cost ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Available from approx. CW 27/2026

Stanje: novo, lastna masa: 450 kg, največja dovoljena obremenitev: 1.550 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.030 mm, širina tovornega prostora: 1.490 mm, višina nakladalnega prostora: 370 mm, prostornina tovornega prostora: 1,8 m³, barva: drugo, gradbena višina: 880 mm, delovna širina: 1.780 mm, Manufacturer: Hapert Model: Flatbed Trailer Alu Azure L-2 Gross Vehicle Weight: 2000 kg Payload: 1550 kg Unladen Weight: 450 kg Bed Dimensions: 2530 x 1290 x 370 mm Tyres: 185/70 R13 Loading Height: 540 mm Standard features: - High aluminum side walls with standard Combi Protect Rail on sides and front Hedpfx Agetmd Uws Isfg - Aluminum tailgate with HAPERT locking system - Engineered drop side hinges for easy attachment of a cargo net - Loading floor height: 52 cm at 2000 kg (2700 & 3000 kg: +3 cm, 3500 kg: +4.5 cm) - 15 mm multiplex wooden floor with anti-slip surface - TÜV-certified load securing system from Hapert: integrated lashing brackets in the side edges - Bolted V-drawbar - Fully welded and fully hot-dip galvanized chassis, suitable for up to 3500 kg gross vehicle weight - Robust, foldable jockey wheel - Numerous extra options available Price includes vehicle registration certificate (Part II and COC documents). We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary license plate for transfer. We repair trailers of all brands. Further accessories available on request. Technical modifications, price changes, and errors reserved. No liability for mistakes or misprints. Features: automatic reversing mechanism, rubber suspension axle, independent wheel suspension, robust foldable jockey wheel, marker lights, fully welded and hot-dip galvanized chassis for up to 3500 kg GVW, braked, includes warranty, high aluminum side walls with standard Combi Protect Rail, aluminum tailgate with HAPERT locking system, engineered drop side hinges for easy cargo net attachment, loading floor height 52 cm at 2000 kg (2700 & 3000 kg: +3 cm, 3500 kg: +4.5 cm), 15 mm multiplex anti-slip wood floor, TÜV-certified load securing system with integrated side-edge lashing points, bolted V-drawbar, many extra options available.

Stanje: rabljeno, največja dovoljena obremenitev: 2.300 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2015, Notr. št.: B - 06 Po naročilu stranke Fliegl Hedpfx Agexvf U Nj Isfg * TTS 30-30 * Nizkopotni polpriklopnik * Rampe * 2-osni * dovoljeno skupna masa 3000 kg * zelo dobro ohranjen, malo uporabljen Možna menjava Financiranje od 3,99 % Napake in vmesna prodaja pridržane! Podatki v tem oglasu so nezavezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti za napake pri vnosu ali prenosu podatkov. Oprema, navedena v oglasu, je treba preveriti ločeno. Vsi podatki v oglasih so nezavezujoči! Dostava po celotni Nemčiji na zahtevo Delovni čas: ponedeljek do četrtek od 9:00 do 17:00 petek od 9:00 do 14:00 ter po dogovoru!

Stanje: rabljeno, največja dovoljena obremenitev: 12.720 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2021, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.360 mm, višina nakladalnega prostora: 1.000 mm, prostornina tovornega prostora: 11 m³, Oprema: ABS, * 9003 - ID vozila za telefonska povpraševanja * SAF osi, zračno vzmetenje, zložljiva zaščita proti podrsanju, delovna ploščad, rolo ponjava, vlečna ušesca Ø 50 mm Hedpfjyca Ulex Ag Iofg * Tristranski kiper, Bordmatik levo, 4x pritrdilne zanke v dnu * Odlično stanje! * Pnevmatske gume 385/65R22,5 (12 mm) ----naš e-poštni naslov:     naša storitev za vas:       - Pridobitev kratkoročnih ali carinskih registrskih tablic       - Prevoz / dostava v celotni EU       - Carinjenje vozil za tretje države Če imate vprašanja v ruskem jeziku, lahko pokličete na naslednjo številko * WhatsApp je samo za govorce ruščine: * WhatsApp za angleščino, nemščino in druge jezike:

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) Hedpsx Hm Rcefx Ag Iofg * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem compensation unit * Height-adjustable drawbar, approx. 300 mm, with 40 mm flange towing ring * Jost mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on the chassis * 15-pin electrical connector * LED tail lights 12/24 V * Bolt-on underrun guard * Plastic quarter mudguards * Net hooks located at the central locking bearing and 2 on the front wall * Chassis made of high-tensile steel * Steel three-way tipper body with reinforced "Strong" side walls (continuous upper side walls, reinforced with internal tube, no central stanchions, foldable with side wall spring lifter) * Bolt-on rear stanchions * Combination steel double-wing rear door, asymmetrical split, can swivel and be locked at 270°, not foldable, with additional pendulum frame for automatic tailgate opening when tipping, locking via galvanized rotary bolt lock at the rear and central locking. Deactivation function for automatic tailgate operation when reverse tipping with open door wing * 1 x 5 t lashing ring in each corner and 4 x 3 t lashing points recessed into the outer frame on each side * 4 mm high-tensile steel floor plate * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired & tracked vehicles * Lockable rear storage compartment recessed below the loading area in the chassis for the ramps * Drawbar, underrun guard, rear stanchion, and rear folding supports hot-dip galvanized * Axles, springs, air tanks, and support winch painted in a black finish * Tires: 358/55 R 19.5 * Side wall coating in a RAL color of your choice (no custom or metallic finishes). Color can be changed up to approx. 6 weeks before completion. * Subject to errors and prior sale. * Available immediately from week 29/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic leaf springs with tandem compensating aggregate * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front-right on chassis * 15-pin power connector * LED rear lights 12/24 V Hfodpex Hm Rijfx Ag Ieg * Bolt-on side underrun protection * Plastic quarter mudguards * Tie-down hooks located at central locking mounts, plus 2 on the front wall * Chassis made of fine grain steel * Steel platform – 3-way tipper body with reinforced strong side walls (continuous upper side walls with internal tube reinforcement – without intermediate posts, side walls foldable with drop side spring assist) * Rear corner posts bolted * Combination steel wing-door rear wall – dual-wing asymmetrical, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping operation, locking via galvanised turning rod lock at the rear and central locking, deactivation function for automatic rear wall operation when tipping backwards with open door * Four 5 t lashing points in the corners, and four 3 t lashing rings recessed in the outer frame on each side * 4 mm steel floor made of fine grain steel * Mounting rail at rear for loading ramps * Reinforced body with cargo lashing certificate * 1 pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tyred & tracked vehicles * Lockable storage compartment at rear under load area recessed in chassis for the ramps * Drawbar, underrun protection, rear corner posts, and rear foldable supports hot-dip galvanized * Axles, springs, air tank and landing gear painted in black * Tyres: 358/55 R 19.5 * Drop sides painted in desired RAL color (no special or metallic finishes) – can be changed up to approx. 6 weeks before completion * Subject to errors and prior sale * Available immediately from calendar week 29/2026 * Example images

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated in underrun protection ----General Attachments: * Landing gear at the front * Fold-out support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Plastic quarter mudguards ----Tipper Body: * Steel 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall, smooth sheet steel * Hardwood pad for excavator bucket bolted to front wall * Continuous, folding drop sides without central stanchion, with sideboard spring assist and manual central locking system * Screwed-in rear stanchions * Combination steel swing doors, asymmetrical 2-leaf rear wall, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping, locking via galvanized rotary bar lock and central locking system, deactivation function for automatic rear wall opening when tipping reverse with open swing doors * 4 mm steel floor plate * Two-step entry left front * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Loading Ramps: Hsdpfx Agevin T Se Iefg * Integrally mounted ramp storage at the rear of the chassis * 1 pair of aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports hot-dip galvanized * Sideboard paintwork in RAL custom color (with exceptions for special or metallic paintwork); can be changed up to approx. 6 weeks prior to delivery * Axles, air tanks, flange drawbar eye, front landing gear painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Brake: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering device, including Ride-Through-Release (RtR) valve and manual lowering function for loading ----Drawbar / Flanged Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flanged drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V fitted in underrun protection ----General Attachments: * Support winch at front * Fold-away rear support legs on the outside * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards ----Tipping Body: Hfodpsvin Ucjfx Ag Iog * Steel pallet – 3-way tipper body made of high-tensile fine grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood strip for excavator bucket screwed onto front wall * Continuous side panels – fold-down without center pillar, with sideboard spring-assist lifters and swinging function via manual central locking * Bolt-on rear stanchions * Combination steel swing doors at rear, 2-leaf, asymmetrically split, able to swing open 270° and lockable (not foldable), including additional swinging frame for automatic rear door opening when tipping; locking by galvanized rotating bar lock and central locking, deactivation function for automatic rear door opening when tipping backwards with opened swing doors * 4 mm steel floor plate * Two-step access on the left front * Rear ramp track for loading ramps ----Load Securing: * One 7 t lashing ring in each corner * Four 3 t lashing eyes recessed in the outer frame on each side ----Loading Ramps: * Recessed ramp compartment at rear of chassis * 1 pair aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear supports hot-dip galvanized * Sideboards painted in any desired RAL colour (excluding special or metallic paints), can be changed up to approx. 6 weeks before completion * Axles, air tanks, flanged drawbar eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Errors and intermediate sale reserved ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: novo, lastna masa: 900 kg, največja dovoljena obremenitev: 3.500 kg, skupna masa: 2.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.350 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,8 m³, barva: drugo, gradbena višina: 1.020 mm, delovna širina: 1.860 mm, Manufacturer: Hapert Model: Cobalt 3-Way Tipper HM-2 Permissible total weight: 3,500 kg Payload: 2,600 kg Tare weight: 900 kg Body dimensions: 3,350 x 1,800 x 300 mm Tyres: 195/50 R13C Loading height: 690 mm With electro-hydraulics and manual emergency pump Incl. ramp package: 2 integrated aluminium loading ramps, 2 crank supports 3-way tipper features: - Fully welded and hot-dip galvanised chassis - Low profile chassis with 195/50 R13 tyres - Robust hydraulic cylinder with electrically operated pump Hfodpetmfh Aofx Ag Isg - Heavy-duty foldable jockey wheel - Galvanised steel sheet on multiplex floor panel - TÜV-approved load securing system - Specially designed sideboard hinges for easy installation of load nets - 4 removable corner stanchions - Aluminium side walls, 30 cm high, with robust integrated locks Price includes vehicle documents (registration certificate part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide free transfer license plates. We service trailers of all makes. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability for misprints or errors. Equipment overview: Hydraulic cylinder with electrically operated pump, reversing automatic system, rubber suspension axle, independent wheel suspension, loading ramp, tiltable loading platform, heavy-duty foldable jockey wheel, clearance lights, galvanised steel sheet on multiplex floor panel, overrun brake, incl. warranty, fully welded and hot-dip galvanised chassis, low profile chassis with 195/50 R13 tyres, TÜV-approved load securing system, specially designed sideboard hinges for easy installation of load nets, 4 removable corner stanchions, aluminium side walls, 30 cm high, with robust integrated locks.

Stanje: novo, lastna masa: 900 kg, največja dovoljena obremenitev: 2.600 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.350 mm, širina tovornega prostora: 1.800 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,8 m³, barva: drugo, gradbena višina: 1.070 mm, delovna širina: 1.860 mm, Manufacturer: Hapert Model: Cobalt 3-Way Tipper HM-2 Ferro Permissible total weight: 3500 kg Payload: 2600 kg Unladen weight: 900 kg Cargo bed dimensions: 3350 x 1800 x 300 mm Tyres: 185 R 14C black steel rims Loading height: 750 mm 3-way tipper - parabolic suspension incl. 100 km/h certification - Chassis fully welded and fully hot-dip galvanized - Robust hydraulic cylinder with electric pump and manual emergency pump - Cargo floor made of hot-dip galvanized steel sheet - TÜV-certified load securing system - 4 removable corner stanchions - Aluminium side walls, 30 cm high, with robust recessed locks - Heavy-duty folding jockey wheel - Aluminium loading ramps integrated underneath the floor, incl. U-profile - Stable foldable crank supports - Separate battery charger supplied - Only genuine BPW parts used - 13-pin connector Price includes vehicle registration certificate (registration document Part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide you with a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical modifications, price changes, and errors excepted. No liability is accepted for mistakes or misprints. Aluminium loading ramps integrated under the floor, robust hydraulic cylinder with electric pump, automatic reverse function, rubber suspension axle, independent wheel suspension, tilting cargo bed, heavy-duty folding jockey wheel, marker lights, cargo floor made of hot-dip galvanized steel sheet, overrun brake, including warranty, chassis fully welded and hot-dip galvanized, TÜV-certified load securing system, 4 removable corner stanchions, aluminium side walls, 30 cm high, with robust recessed locks, incl. U-profile, stable fold-out crank supports, separate battery charger supplied, only genuine BPW parts used, 13-pin connector. Hfedpfx Aotmd U Ejg Iog