Invepe Plateau Extensible Mega nakup rabljenega (5.829)

Stanje: rabljeno, lastna masa: 10.680 kg, največja dovoljena obremenitev: 53.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2020, skupna dolžina: 20.500 mm, skupna višina: 1.400 mm, vzmetenje: zrak, nosilnost: 42.320 kg, • 1. os dvižna • 3. os samosledilna • Ploščad 2,40 m • Višina ploščadi 1,40 m • Dolžina ploščadi 13,30 m Codpfx Akjx Hky Uocoha • Raztegljiva do 20,50 m • Shranjevalna skrinja • Dolg rešetkast nosilec • Rezervoar za vodo • Konvojski komplet • 10 pritrditvenih obročev • WABCO SmartBoard • 20 aluminijastih količkov po naročilu

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT21801003760, lastna masa: 4.480 kg, največja dovoljena obremenitev: 13.520 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2014, skupna dolžina: 10.020 mm, skupna širina: 2.550 mm, velikost pnevmatike: 445/45 R19,5", barva: siv, Further information Fine-grained steel welded construction 1 gearbox support leg at the front, with straight lower section and one-sided operation on the right in direction of travel Wheel chocks with holder, aluminium side underrun protection, steel rear underrun protection Half-shell mudguards slightly protruding over main frame, rear impact protection buffers Trailer coupling device for tandem trailers Drawbar with tested 50 mm towing eye, freight forwarding version, undercoupling drawbar Axles and Suspension BPW disc brake axles, manufacturer’s choice Air suspension with lift & lower valve Wheels and Tyres 445 / 45 R 19.5, manufacturer’s choice, steel rims, factory silver Brake System 2-line compressed air braking system Spring-loaded parking brake, Duomatic connection at the front, with connecting hose to truck, EBS, Electronic Braking System with EBS connector at the front, with connection cable Brand: Haldex, Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of ABS! Floor: Platform length approx. 7,300 mm, phenolic plywood floor Front wall: Aluminium approx. 1,200 mm, corner stanchions steel in volume version Cjdpsni Udzofx Akcjha Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane-holding lights at the rear 1 x 15-pin connector at the front, with connecting cable Approval / Plates Country of approval: Germany, with Dekra inspection and report 24/7 service hotline, prepared for single-line license plate holders, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT22701003408, lastna masa: 4.800 kg, največja dovoljena obremenitev: 22.200 kg, skupna masa: 27.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2015, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R19,5", barva: rdeča, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross vehicle weight: 27,000 kg Payload approx.: 22,200 kg Axle load: 16,000 kg Fifth wheel load (spec.): 11,000 kg Unladen weight approx.: 4,800 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Coupling height approx.: 950 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis / Semitrailer - Logistics Version Fine-grain steel welded construction, fifth wheel plate with interchangeable 2" kingpin 13 pairs of lashing rings recessed in external frame, each rated at 2.5 t External frame with "load-lock profile" for securing straps 24 t 2-speed landing gear, single-sided operation, straight base, without travel equalizer Wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection Quarter fenders Axles & Suspension 1st axle: SAF drum, 2nd axle: BPW drum, Air suspension Braking System 2-line compressed air brake system Spring-loaded parking brake 2 interchangeable coupling heads at the front, without connecting hose EBS, electronic braking system with EBS socket at the front, without connection cable Warning: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability control system Chjdoy Sk U Aspfx Akcsa Wheels & Tyres 385/55 R19.5, manufacturer at manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights recessed as far as possible 2 white position marker lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin interchangeable sockets at the front, without connection cable Floor Phenolic plywood approx. 30 mm thick, cross joints with omega profile, fitted on longitudinal supports for high point load capacity, suitable for forklift axle load up to max. 7,100 kg Note: Floor deformation due to weather influence possible! Front wall / front corner posts Front wall 1,200 mm high, steel corner posts in volume version, with "viewing windows" Registration / Signs Country of registration: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for single-row license plate holder Warning panel according to ECE - 70 Outline marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: RAL 3002 Carmine Red Landing legs: Black coated Front wall: RAL 3002 Carmine Red Attention, the images shown are archive photos! The vehicle may currently be in use!

Stanje: novo, lastna masa: 8.775 kg, največja dovoljena obremenitev: 42.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 20.500 mm, vzmetenje: zrak, nosilnost: 33.225 kg, • Raztegljiv do 20,50 m • Zaklepanje na vsakih 1000 mm • 12 twistlockov • 1x20’, 2x20’, 30’, 40’ • BAWER zaboji, 3 moduli • Polna LED osvetlitev • Višina priklopa 1170 mm • Prednji podaljšek 1,60 m • Komplet za konvoj • 16 jeklenih stebrov, 1,60 m Csdpfxjzkcgfe Akcoha • Lesena tla z jeklenimi omega profili • Perforirani rob UPN 160 • 1. os dvižna • 3. os samousmerjevalna • Smartboard • Delovne LED luči • Rezervno kolo • PVC zaboj • Pritrdilni obroči

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.640 kg, skupna masa: 40.000 kg, prva registracija: 02/2023, dolžina tovornega prostora: 13.510 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 445/45 R 19,5, barva: siv, Leto izdelave: 2023, 3-axle Mega Flatbed Semi-Trailer HeavyTrailer Gross weight: approx. 40,000 kg Fifth-wheel load: approx. 16,000 kg Axle load: approx. 24,000 kg Unladen weight: 6,640 kg Payload: 33,360 kg Length: 13,510 mm Vehicle width: 2,540 mm Coupling height: approx. 980 mm / 1,100 mm Loading height (unladen): 1,080 mm / 1,200 mm Chassis - Chassis frame construction made of welded longitudinal beams and continuous cross members - Wide underrun neck approx. 700 mm - 6 pairs of lashing rings (2,000 kg lashing capacity), welded into outer frame - 6 pairs of stake pockets (80 x 50 mm) in outer frame - 6 pairs of stake pockets (80 x 50 mm) inside on the longitudinal beam - 2 pairs of ferry lashings, painted yellow - 6 pairs of lashing rings (5,000 kg lashing capacity), welded into outer frame - Front wall approx. 2,000 mm high, with sheet metal cladding, bolted design - Large, edged premium rear lamp panel - Rear underrun protection, welded version (rectangular tube) Cjdev Darpspfx Akcsha - Side underrun protection, both sides Support Legs - 24 t telescopic landing gear, single-sided operation, half-moon with base plate Axles/Suspension - 3 axles à 8 t (technically 9 t), disc brakes - Second ride height: Button for 2nd ride height at bracket for raising and lowering (+ approx. 120 mm) - Air suspension, total stroke approx. 300 mm - Lifting and lowering device with 1 rotary slide valve - Holder for lifting/lowering device, bolted version - 6 tyres 445/45 R 19.5 - Wheel mounting via center centering Brakes - Dual-circuit compressed air brake system according to EC Directive 71/320 - With double eyelet valve for brake and spring brake - Test nipple for brake cylinder pressure at front right brake cylinder - Each coupling button red and yellow - Lifting/lowering device mounted at rear left in direction of travel - 2 x approx. 80 l air tanks in steel, painted black (1x brake, 1x lifting/lowering) Lighting System - Lighting system 24 Volt with large multifunction lights - Side marker lights (LED) with reflector - Front position lights, lower, white, one each on left and right - 15-pin plug and socket at front - EBS socket - License plate lighting Floor - 28 mm hardwood floor with galvanized omega steel profiles - Hardwood floor screwed onto the cross members - Omega profiles bolted to head frame Painting - KTL with zinc phosphating plus powder coating - Chassis + front wall: MB 7350 novagrau Accessories - Contour marking for flatbed vehicles - Front wall up to 2,000 mm high, with sheet metal cladding, plug-in type - Bracket for rotating beacon at rear - SmartBoard - ECE marking plate at rear - 4x warning signs, extendable - Access ladder rear right, foldable and extendable at rear - 2x wheel chocks with holder - 2 rubber bumpers at rear corners - Mud flaps at rear - Plastic fenders with anti-spray mud flaps - 4 pairs of container locks with retractable twistlocks, recessed into the floor, including additional cross members - Suitable for accommodating 1x40' and 2x20' containers - Open mesh box longitudinally in direction of travel (600 x 450 x 2,670 mm), galvanized, bolted

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.840 kg, največja dovoljena obremenitev: 21.160 kg, skupna masa: 26.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.050 mm, širina tovornega prostora: 2.550 mm, skupna dolžina: 12.200 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", Customised transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are individually tailored to customer specifications. Chassis: Semi-trailer for freight forwarding Fine-grain steel welded construction, fifth-wheel plate with replaceable 2" kingpin, reinforced attachment point for 'gallows' mount and robust wear plates around the area. Rear coupling rail for aluminium ramps. Outer frame: Slightly tapered, new design with 'Load-Lock profile' for lashing strap attachment. 'Patented Load-Lock-Cross' for lashing strap attachment, cross-member beneath the outer frame, 24 t. 2-speed landing gear, single-sided operation, with straight lower section, without compensating cylinder, free landing leg base or free rear swing clearance approx. 1920 mm, without supports, 2 wheel chocks with holders, aluminium side underrun protection, steel rear underrun protection, quarter-round mudguards in front of and behind each axle, without impact guard, spare wheel holder for 1 spare wheel, with wheel fixing kit, spare wheel matching main tyre brand, steel rim. Chodpfxszb Ikfj Akcja Plastic toolbox with shelf, width=620/height=360/depth=440 mm, lockable with padlock. Axles & Suspension: Drum brake axles, axles/chassis laser-aligned to reduce tyre wear and fuel consumption. Non-steering, air suspension, without lift axle. Brake system: 2-line pneumatic brake system. Colour-coded piping for easier maintenance, spring-loaded parking brake. 2 non-interchangeable coupling heads front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front (no connecting cable). Note: The trailer may only be towed by tractors capable of ensuring ABS efficacy! With raise/lower valve, vehicle stability control. Wheels & Tyres: 205/65 R17.5, make at manufacturer's discretion, rated for 8 t axle load at 80 km/h, steel rims, factory silver. Electrics: 24 Volt, multi-chamber lights, yellow LEDs on the sides, 2 white position lamps at the front, 2 white/red lane-keeping lamps at the rear, 1 x 15-pin socket front (no connecting cable), LED work lamp in angled section (switched via reversing light), if technically feasible, additional LED work lamp at rear, switched via reversing light. Floor: Anti-slip phenolic plywood panels, approx. 30 mm thick, high point load capacity for forklift axle load up to max. 5600 kg. Front wall / Front corner stanchions: 25 mm aluminium box section, 1,350 mm high, steel corner stanchions in volume design. Customised transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown serves as an example. Production and equipment are individually tailored to customer specifications.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801013475, lastna masa: 7.180 kg, največja dovoljena obremenitev: 28.820 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Available in multiple units. Fine-grain steel welded construction, saddle plate with replaceable 2" kingpin, additional splash guard made from sheet metal riveted to the underside floor, in the gooseneck area above the rear axle of the tractor unit as well as above the wheels on the vehicle. Reinforced frame version for vehicle loads up to the outer frame. Outer frame equipped with "Load-Lock profile" approx. every 400 mm for lashing strap attachment, 10 pairs of lashing mushrooms recessed into the outer frame, each rated at 10 tons, 24 ton 2-speed landing gear, single-sided operation, with semi-rounded lower section and straight connection plate, featuring load compensation, foldable rear support, wheel chocks with holder, aluminum side underrun protection, steel underrun protection, quarter-fender mudguards in front of and behind each axle, with additional sheet splash guards over the wheels, fitted with anti-spray mud flaps according to EC standards, 1 plastic toolbox (600 x 425 x 460 mm), lockable. Container locks: 4 pairs of locking recesses embedded in the floor for 2 x 20-foot or 1 x 40-foot container, 4 pairs of container locking adapters (additional cross supports at the front and rear of the container required; the container must be evenly supported across the width; cross supports not included). Ramp attachment bar at rear extension across full width, mechanical rear extension with hand crank extendable by approx. 1,500 mm, lockable every 500 mm, includes extendable underrun protection with lighting. Lane area fitted with Lohr perforated sheet, central area with steel checker plate, storage space for drive-on ramps integrated in rear extension—usable only when rear extension is extended by approximately 1000 mm. For ramp transport with retracted rear extension, ramp storage is located on the right in front of the axles. One pair of ramps, 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg. Electric cable winch, 24 volts, pulling force approx. 8,165 kg, centrally mounted at the very front, operated by remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide rollers. Chodpfsza Aiysx Akcsa Axles & Suspension: SAF or BPW drum-braked axles as selected by the manufacturer, air suspension, first axle with automatic lift axle, additionally electrically operable from the truck, including forced lowering and drive assist. Brake system: 2-line compressed air brake system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, EBS (electronic braking system) with EBS socket at the front (no connection cable provided), with raise & lower valve and fast venting, hold function in lowered position + auto-reset function, vehicle stability system, axle load detection via EBS CAN bus signal. Wheels & Tires: 235 / 75 R 17.5" — brand per manufacturer's choice, twin-mounted steel rims. Electrics: 24 volts, LED multi-chamber lights, side yellow LED lighting, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red lane marker lights at the rear in LED, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, operated via parking light, 2 pairs of double LED-illuminated warning panels extendable to 3,000 mm, 1 additional 7-pin socket (ISO 1724) in the rear underrun protection, 2 side LED work lights (1 each on front left and right). Floor: Lohr perforated stee

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33801012811, lastna masa: 6.350 kg, največja dovoljena obremenitev: 28.650 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", stanje pnevmatik: 100 odstotek, barva: srebrn, multiple units available Chassis fifth wheel forwarding: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin, reinforced frame for vehicle loading, outer frame with "Load-Lock profile" every approx. 400 mm for lashing strap hooks, 10 pairs of lashing mushrooms recessed on top/outside of the outer frame, each rated at 10 t, foldable rear support, 2 wheel chocks with holders, aluminum side underrun protection, galvanized steel rear underrun protection, quarter mudguards in front of 1st axle and behind each axle, with anti-spray flaps behind each axle, 1 spare wheel holder for 1 single wheel, incl. wheel mounting kit, 2 lockable plastic toolboxes, w=600 / h=425 / d=460 mm, container locks: 4 pairs of locks recessed in the floor for 2 x 20 ft or 1 x 40 ft container, front-most position is a recessed fold-down lock, 10 pairs of stanchion pockets recessed in the outer frame, 70 x 40 mm internal dimension, 10 stanchion pockets recessed centrally in the floor, 70 x 40 mm internal dimension, 2 cross tie-down/stanchion rails recessed into the floor spanning the full width to the outer frame (approx. max usable interior width between external stake pockets 2170 mm), about 100 mm high. Includes 20 mm round steel rails at top and bottom, spacing about 60 mm (between rails); bottom end with angled sheet as closure, open downwards halfway. For lashing and inserting stakes up to 80 x 80 mm. Arrangement: Positions 2 and 4 according to Fliegl data sheet, 20 removable stakes, hot-dip galvanized, storage space for aluminium drive-on ramps, ramps can be inserted from the rear, 3 pairs of fold-down lashing points (10 t) in outer frame (1x in front of front wall and 2x at the rear) Axles & Suspension: SAF disc brake axles, air suspension, 1st axle with automatic lift axle, includes forced lowering and start assist, actuated by "brake 3x", axle lift below recommended driving height, therefore no warranty for tire damage Brake system: 2-line compressed air brake system, color-coded routing for easy service, spring-type parking brake, 2 fail-safe coupling heads at front, no connecting line, EBS, electronic braking system with EBS socket at front, no connection cable, with raise & lower valve, 2 driving heights adjustable via manual knob: 1x for coupling height 980 mm, 1x for coupling height 1100 mm, ride height in combination with lift axle; when lift axle is raised, load/overall height increases by 50 mm, vehicle stability control system Wheels and tires: 435/50 R19.5, brand at manufacturer's discretion, steel rims Cjdpfx Aksza Agrjcoha Electrics: 24V, multi-chamber lights, yellow LED side lighting, 2 white LED position lights at the front, 2 white/red lane marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights: 1x each left/right in front frame, 2 additional LED work lights at rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning panels: LED-illuminated and extendable to 4,000 mm, additional 7-pin socket at rear underrun protection Floor: phenolic plywood, approx. 30 mm thick, on longitudinal beams for high point loading, suitable for forklift axle load up to max. 7,100 kg Front wall / corner stanchions: 25 mm aluminum hollow section, 1,350 mm high, steel corner stanchions in volume version, front wall inside also lined with 1,250 mm phenolic plywood, "Crash-Blocker", lower 140 mm inside with steel impact protection, storage compartment for insertable stanchions insi

Stanje: rabljeno, lastna masa: 7.950 kg, največja dovoljena obremenitev: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2012, skupna dolžina: 17.800 mm, skupna širina: 2.550 mm, vzmetenje: zrak, stanje pnevmatik: 40 odstotek, nosilnost: 31.050 kg, • Dolžina 13,73 m • Raztegljiv do 17,80 m • Prva os dvižna Chodpezcg Rgofx Akcsa • Tretja os sledilna • 10 stebrov • Rezervno kolo • Konvojski komplet • Shranjevalne omarice • Delovne LED luči

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT22702011668, lastna masa: 4.800 kg, največja dovoljena obremenitev: 22.200 kg, skupna masa: 27.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2013, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R19,5", barva: rdeča, Attention: The images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross weight: 27,000 kg Payload approx.: 22,200 kg Axle load: 16,000 kg Stated kingpin load: 11,000 kg Unladen weight approx.: 4,800 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Maximum overall width: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth-wheel height approx.: 950 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarding High-tensile fine-grain steel welded construction, fifth wheel plate with interchangeable 2" kingpin 13 pairs of recessed lashing rings in the outer frame, each rated at 2.5 t Outer frame with "Load-Lock profile" for attaching tie-down straps 24 t, 2-speed landing gear, single-sided operation, with straight lower section, without side shift Wheel chocks with holders Side underrun protection made of aluminum Rear underrun protection, galvanized steel Quarter shell mudguards Axles & Suspension BPW disc brake axles Air suspension Chedpfx Ajy Sk Szekcoa Braking System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer must only be towed by tractors that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Wheels and Tires 385/55 R19.5" manufacturer according to factory selection Steel rims, factory silver Electrics 24 Volt, multi-chamber lights Side-mounted yellow LED lighting, set as far inside as possible 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connection cable Floor Approx. 30 mm phenolic resin-coated plywood, cross joints with omega inserts, mounted on longitudinal beams for high point load capacity, suitable for forklift axle load up to max. 7,100 kg Note: Flooring may be subject to warping due to weather conditions! Front Wall/Front Corner Posts 25 mm aluminum hollow section, approx. 1,200 mm high, volume version steel corner posts with 2 "windows" Registration / License Plates Country of registration: Germany With Dekra inspection and expert report 24/7-service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective tape in accordance with ECE R 048, white on sides and red at rear Paintwork Frame: RAL 3002 carmine red Landing legs: Black coated Front wall: RAL 3002 carmine red Attention: The images shown are archive photos! The vehicle may currently be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT22701003406, lastna masa: 4.800 kg, največja dovoljena obremenitev: 22.200 kg, skupna masa: 27.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2013, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R19,5", barva: rdeča, Attention, the images are archive photos! The vehicle may still be in use! Weights and Dimensions: Gross vehicle weight: 27,000 kg Payload approx.: 22,200 kg Aggregate load: 16,000 kg Stated fifth wheel load: 11,000 kg Unladen weight approx.: 4,800 kg +/- build tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-trailer for Forwarders Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin 13 pairs of lashing rings recessed in the outer frame, each rated at 2.5 t Outer frame with “Load-Lock profile” for attaching lashing straps 24 t, 2-speed landing gear, single-sided operation, with straight lower section, without sliding compensation Wheel chocks with holder Side underrun protection made of aluminium Rear underrun protection made of steel Quarter shell mudguards Document box on front bulkhead, left side (mounted at a slight angle) Axles & Suspension BPW disc brake axles Air suspension Braking System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without connector line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The towed vehicle may only be hauled by tractors which ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability system Wheels and Tyres 385/55 R19.5", make at manufacturer’s discretion Steel rims, factory silver Electrics 24 volt, multi-chamber lights (3 sets of old Hella lamps still at factory 2, to be installed if possible), yellow LED side lights installed as far in as possible 2 white position lights at the front, protected by 12 mm round iron crossbars welded above 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable sockets at front, without connection cable Floor Screen-printed plywood approx. 30 mm thick, transverse joints with Omega insert, mounted on longitudinal bearers for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping may occur due to weather exposure! Front Bulkhead/Corner Posts Approx. 1,200 mm high, steel corner posts in volume design Approval / Plates Country of registration: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for single-line number plate holder Warning panel according to ECE - 70 Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: RAL 3002 carmine red Landing legs: black coated Front wall: RAL 3002 carmine red Cedpfx Asy Sk Rqskceha Attention, the images are archive photos! The vehicle may still be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT22702018968, lastna masa: 4.000 kg, največja dovoljena obremenitev: 23.000 kg, skupna masa: 27.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2016, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R19,5", barva: rdeča, The images are archive photos! The vehicle may currently be in use! 2-Axle Flatbed Semi-Trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Permissible/Technical Gross Weight: 27,000 kg Permissible/Technical Payload approx.: 23,000 kg Permissible/Technical Axle Load: 16,000 kg Permissible/Technical Fifth Wheel Load: 11,000 kg Unladen Weight approx.: 4,000 kg +/- building tolerance Overall length approx.: 13,850 mm Max. overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consisting of: Chassis - semi-trailer for transport logistics Fine grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with “Load-Lock Profile” for securing lashing straps. Notice: To attach the straps in combination with sideboards, the sideboards must be opened! 14 pairs of lashing rings, each rated for 2.5 t 24 t two-speed support winch, one-sided operation, with straight lower part, without compensating device Without landing legs Wheel chocks with holder Aluminium side underrun protection, Steel rear underrun protection Quarter shell mudguards Axles & Suspension SAF disc brake axles Air suspension Brake System 2-line compressed air brake system Spring-actuated parking brake 2 fail-safe coupling heads at front, without connecting lines EBS electronic braking system with EBS socket at front, without connection cable Attention: The trailer may only be towed by vehicles that ensure full ABS functionality! With raising/lowering valve Vehicle stability control system Wheels and Tires 385/55 R19.5" – Make as per manufacturer’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, lateral yellow LED lighting 2 white front position lights, protected with round iron 2 white/red lane marker lights at rear 2 x 7-pin fail-safe sockets at front, without connection cable Chodoy Rxmwjpfx Akcja Floor Anti-slip phenolic boards approx. 30 mm thick, cross joints with Omega inserts, on longitudinal supports for high point-load resistance, suitable for forklift axle load up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front Bulkhead / Corner Posts 25 mm aluminium hollow profile, approx. 1,350 mm high, steel corner posts in volume version, with “holes” for forklift drivers Approval / Plates Germany With Dekra inspection and certificate 24/7 service hotline Prepared for single-line number plate holder Warning plate according to ECE - 70 Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Paint Frame: RAL 3002 carmine red Support legs: black coated The images are archive photos! The vehicle may currently be in use!

Stanje: novo, največja dovoljena obremenitev: 25.050 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Skupna masa: 35.000 kg / 48.000 kg Lastna masa: 9.950 kg Nosilnost: 25.050 kg / 38.050 kg Skupna dolžina: 21.000 mm Dolžina nakladalne površine: notranja dolžina ca. 13.500 mm / največja dolžina nakladalne površine 21.000 mm Širina: 2.550 mm Višina nakladalne površine: 950 mm Chsdpfsumha Nsx Akcja Dodatne informacije Novo vozilo iz tekoče proizvodnje, kmalu na voljo Teleskopska zadnja podpora 4 zagozde za podlaganje koles z nosilcem 4 para spuščajočih kontejnerskih zapor v dnu za 1x 40 ft. kontejner ali 2x 20 ft. kontejnerja 1 nosilec rezervnega kolesa za 1 rezervno kolo, z garnituro za pritrditev, v košarici 11 parov žepov za stranice v zunanjem okvirju, primerni za FR-vložne stranice 80x50 mm, vgrajeni poravnano z zunanjim okvirjem, z odprtino za pritrditev pasu ali verige 20 kosov natakljivih stranic B=80 / G=50 / D=1500 mm 1 plastična orodjarna 3 para priveznih ušes po 3,5 t, vgrajenih v stranski okvir – v predelu vratu 13 parov zložljivih priveznih obročev po 10.000 daN, prostoviseče obešenih v profilu stranskega okvirja (primerni tudi za prekomerno široko privezovanje) 1 par zložljivih priveznih obročev po 10.000 daN, vgrajenih ob strani na vmesni podpori Zračno vzmetenje z možnostjo dviga in spuščanja 1. os samodejna dvižna os, dodatno prisilno spuščanje, vključno s pripomočkom za speljevanje z gumbom za upravljanje na polpriklopniku, brez upravljanja iz kabine voznika z ventilom za dvig in spust + funkcija samodejne ponastavitve Kolesa in pnevmatike 235/75 R 17,5" jekleni platišči v dvojni izvedbi, tovarniško srebrni 24 V, večkomorni žarometi, stranska rumena LED osvetlitev 2 sprednji beli pozicijski LED luči 2 zadnji LED luči za označevanje sledi (belo/rdeče) 2 x 7-polna in 1 x 15-polna varnostna vtičnica spredaj, brez priključnega kabla 2 dodatna LED delovna žarometa zadaj, vklop preko vzratne luči 1 odstranljiva opozorilna luč na zaščiti proti podrsu 1 x 7-polna vtičnica zadaj 6 stranskih vtičnic: 2x sprednja stena, 2x podporna noga, 2x zadnji konec (levo + desno), 7-polni 2 delovna žarometa, zgoraj vgrajena v sprednjo steno, vključno s stikalom 2 para table za označevanje prekomerne širine, vsaka s po 2 LED pozicijski lučki na tablo, stransko raztegljive do 3.500 mm, table dodatno nastavljive na nakladalno površino (prilagoditev širine brezstopenjsko) Fiksna jeklena sprednja stena, višina 1.200 mm, z robustnimi jeklenimi vogalnimi stebri brez poševnine v kotih, stransko ravna izvedba 2 luknji za privez zgoraj noter in zunaj v zgornjih kotih sprednje stene Prednji okvir vroče cinkan + zunanji okvir na vidnem delu končna lakirana v RAL 3002 karminsko rdeči barvi Zadnji okvir vroče cinkan + zunanji okvir na vidnem delu končna lakirana v RAL 3002 karminsko rdeči barvi Sprednja stena RAL 3002 karminsko rdeča

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area: - Loading deck in extendable design - Loading deck with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the loading deck's external frame for attaching tension belts Braking system: - Braking system in accordance with EU regulations, with EBS-E (2S2M) Painting: - First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer - High-quality two-component (2K) top coat in solid Novagrey - Rear section metallised and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t) Steel construction: - Steel structure made from high-strength fine grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 15-pin Axles and tyres: - BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function - Hydro-mechanically forced steering - Axle tools - Twin tyres 235/75 R 17.5 Accessories included: - Yellow-red air couplings at the galvanised front connection bar - 4 wheel chocks with holder Chsdpfx Aksl Ux Rwscsa - 2" king pin - Galvanised steel headboard approx. 1600 mm high - White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations - Loading deck with heavy-duty hardwood floor - Rear and front steering by cable - Remote control via push buttons, with single-track monitoring of the axles - With wireless remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck - Galvanised folding supports under the loading deck bevel - Sliding mounting rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the trailer rear - One mud flap at the trailer rear - Mount for a beacon at the trailer rear - Mounts for warning boards including socket on gooseneck and rear panel, each left and right - Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction - Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump - 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section - 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes - Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition - 80 km/h speed stickers at the rear and on both sides - Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light - Beacon mount on the warning boards - Load gauge for axle load determination, including load diagram - HRM metallisation (High Resistance Metallisation) on the external frame - Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying

Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design: Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8° 1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN) 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN) Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Brake system: Brake system as per EU regulations with EBS-E (2S2M) Paintwork: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer High-quality single-colour 2-component (2K) top coat in Nova grey Rear section metallized and painted in RAL 9010 (Pure White) No metallic paint possible Landing gear: JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction from high-tensile fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tyres: BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually Axle tool Tyres: 435/50 R 19.5 Accessories included: At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets 2" kingpin Galvanized steel front wall approx. 1,600 mm high, EN12642-XL White reflective tape to EU standards on the sides, extension section and red at the rear Loading platform with heavy-duty hardwood floor 9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform 1 spare wheel holder under the platform on the right (direction of travel) Galvanized folding supports under the rear slope of the loading area Sliding mounting rails for ALU loading ramps at the rear of the vehicle European reflective plates (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer Cedpfxok Eamme Akcjha Bracket for a rotating beacon at the rear of the semi-trailer At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket One HDPE toolbox 620x360x610 under the platform on the left (direction of travel) 4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container 3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition Speed stickers 80 km/h on the rear and both sides Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards Load gauge including axle load diagram HRM metallization (High Resistance Metallisation) of the outer frame Complete steel structure shot blasted, then specified visible surfaces metallized

Stanje: novo, lastna masa: 8.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.080 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism Cutouts in the outer frame of the loading platform for attaching lashing straps Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity Axles and tires: BPW axles, air-suspended, with disc brakes (430 mm), with lift/lower function Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually Axle tools Tires 385/65 R 22.5 Braking system: WABCO braking system in accordance with EU regulations with EBS-E Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer A high-quality single-color 2-component topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 No metallic paint available Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N / S355MC S690QL / S700MC Electrical system: Electrical system in accordance with EU regulations Lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection bar with 24N, 24S and 15-pin sockets Connection according to ISO Accessories included: Front galvanized connection bar with yellow-red air couplings One galvanized steel front wall approx. 1,600 mm high, EN12642-XL Chjdpfxeikyh Hs Akcoa 4 wheel chocks with holders White reflector tape according to EU regulations on the sides, on the extension, and in red at the rear European reflective plates at the rear of the trailer Loading platform with approx. 30 mm thick hardwood floor enclosed in omega profiles 10 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in the direction of travel Manual and description One holder for a rotating beacon at the rear of the trailer On the gooseneck and each side of the rear plate (left and right), a bracket for warning panels incl. socket Anti-slip sand layer painted onto the central beam 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; the extension includes an additional locking point for one 45ft container 4 pairs of transverse stake pocket rails mounted in the loading platform for plug-in stakes 100 x 50 mm One galvanized holder transversely under the loading platform, 2,390 x 720 x 400 mm Access ladder mounted right-hand side in direction of travel Front axle lift axle with control via TEBS E depending on current axle load and load status Load manometer for determining axle loads, including load chart HRM metallization of the outer frame: complete steel structure shot-blasted, then the defined visible surfaces metallized hot-finished with ZINACOR 850

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles Csdpfoiuy Nlsx Akcoha - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Csdpfxji Dwlwo Akcsha Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, DOBRODOŠLI PODJETJE SMUSZKIEWICZ PONUJA: PRIKLOPNIK SCHWARZMULLER MEGA DATUM PRVE REGISTRACIJE 11.2023 LETNIK 2023 POPOLNA DOKUMENTACIJA V ODLIČNEM TEHNIČNEM IN OPTIČNEM STANJU Oprema: -Multilock -Avtomatsko dvigljivo os -Dvigljiv strešni del, z možnostjo nastavitve višine za vožnjo -Os SAF -Orodjarna -2 nosilca za rezervno kolo -Velik predal pod šasijo zadaj, ki se razteza po celotni širini priklopnika -Aluminijaste letve -Zaščitna pločevina na zadnji plošči tal -Krožna vrv za pritrditev ponjave -Kolesne zavore -Code XL DIN EN 12642 -GUME -435/50 R 19,5 Chedpfszrwacsx Akcja KONTAKT S PRODAJALCEM: CZAREK +48 883 017 300 (govori angleško in poljsko) FABIO +48 883 017 004 (govori francosko, portugalsko in poljsko) SARA +48 883 017 330 (govori rusko, angleško, poljsko, armensko, špansko, italijansko in nemško) MARTYNA +48 883 017 200 (govori angleško in poljsko) HANIA +48 883 017 111 FINANCIRANJE (LEASING, KREDIT) uredimo na licu mesta, čas izvedbe 1–2 dni. Novim strankam pomagamo pri ureditvi financiranja. KONTAKT Z ODDELKOM ZA FINANCIRANJE FINANCIRANJE +48 691 350 350 ZAVAROVANJA +48 691 370 370 ADMINISTRACIJA +48 691 360 360 IMPORTER SMUSZKIEWICZ 62-200 Gniezno, ul. Pałucka 11. Uvozimo vozila za potrebe strank.

Stanje: rabljeno, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.670 mm, širina tovornega prostora: 2.550 mm, prostornina tovornega prostora: 27 m³, barva: siv, Leto izdelave: 2017, Lastna teža: 7.040 kg Nosilnost: 32.960 kg Chodpfx Aoydvatekcja Skupna dovoljena masa: 40.000 kg

Stanje: rabljeno, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, prva registracija: 11/2024, prostornina tovornega prostora: 55 m³, Leto izdelave: 2024, Mega MNL mega lahek prekucnik 55 m3 Csdpfx Aezc S Scekcjha

Stanje: rabljeno, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, prostornina tovornega prostora: 55 m³, Leto izdelave: 2024, Mega MNL, MEGA lahek prekucnik 55 m3 Chodpfx Aezc S Sijkcoa

Stanje: rabljeno, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, prostornina tovornega prostora: 55 m³, Leto izdelave: 2024, Mega MNL mega lahek prekucnik 55 m³ Chjdpezc S Rxjfx Akcja

Stanje: rabljeno, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, prva registracija: 10/2022, prostornina tovornega prostora: 55 m³, Leto izdelave: 2022, Mega MNL, MEGA lahek prekucnik 55 m3 Chsdszc S R Sjpfx Akcea

Stanje: rabljeno, skupna masa: 35.500 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, prostornina tovornega prostora: 55 m³, Leto izdelave: 2024, Mega MNL, MEGA lahek prekucnik 55 m3 Chjdpfx Akszc S Rljcja