Faymonville Multimax Plus (Neugerät) nakup rabljenega (5.043)

Stanje: novo, največja dovoljena obremenitev: 38.370 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 960 mm, širina tovornega prostora: 254 mm, Leto izdelave: 2026, Proizvajalec: Faymonville Tip: Multimax Plus Leto izdelave: 2026 Vrsta izdelka: Novo Podatki: Gosji vrat, dolžina x širina: 3,70 x 2,48 m Tovornična površina, dolžina x širina: 9,60 x 2,54 m Število osi: 3 Nosilnost: 38.370 kg Lastna teža: +/- 11.130 kg Dovoljena skupna masa: 49.500 kg Oprema: BPW osi in vzmetenje, 1. in 2. os fiksni, 3. os vodilna. 3. os z elektro-magnetno blokado za vzvratno vožnjo, samodejno ob vzvratnem prestavljanju in ročno aktiviranje. Tehnična osna obremenitev: 12.000 kg. Nanesen peskani premaz na pokrivnih pločevinah gosjega vratu ter na prehodih med vratom in dvigovalnim ležiščem, med dvigovalnim ležiščem in tovorno površino ter med tovorno površino in rampami. 1 rezervno kolo z nosilcem pod tovorno površino desno pred osmi. Izrezi v zunanjem okviru tovorne površine in dvigovalnega ležišča za obešanje zateznih trakov (LC 2.000 daN). Dodatna oprema: električna vitla, cca 5.400 kg vlečne sile, z daljinskim upravljanjem. Jeklenica cca 24 m dolga, premer cca 9,5 mm, vključno z valjčkom za pritisk vrvi. Montaža vitla spredaj znotraj na gosjem vratu. 1 INOX zaščitna omarica za električno vitlo 5.400 kg, cca 825 x 340 x 390 mm (D x Š x V), ravna izvedba, z 1 pokrovom zgoraj in izrezom za kabel vitla. 1 INOX orodjarna, cca 620 x 300/180 x 950 mm (D x V x G), montirani levo in desno pod tovorno površino pred osmi, zadaj poševni. WABCO Smart Board sistem. Podatki o osni obremenitvi so veljavni le, ko je vozilo v nominalni višini vožnje, sicer so možna odstopanja. Smart Board ima števec prevoženih kilometrov. 1. os s pomočjo pri speljevanju. Razbremenitev zračnih blazin do 30 km/h in do 130% legalne osne obremenitve na preostalih oseh. Upravljanje preko zavornega pedala v vlečnem vozilu. Odlagalna površina za mostne elemente ramp pred osmi. Tsdpfxszdmi Rj Af Hea Informacija: vzorčne slike Opomba: Lokacija: Essen, takoj na voljo.

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Celotno zalogo vozil, ki so na voljo takoj in v kratkem roku, najdete na naši spletni strani - ge.de. Izvleček iz opreme. Celotna oprema na zahtevo. GOSJA VRAT: Tsdpfsy Auhhjx Af Hea * Gosja vrat v SNT dizajnu za optimizacijo dolžine tovornega prostora, dolžina približno 3.700 mm, zadnji del s poševnostjo približno 1.000 mm x 6° * Za SZM (prikolico z menjalnikom): 4 x 2 in 6 x 2 * ASPÖCK-UNIBOX * Na gosji vrati in zadnji poševnosti rešetkasta površina z 5 mm jekleno ojačitvijo * 2-palčna kraljevska vlečna glava * Vodilna plošča na gosji vrati za priklopno ploščo, približno 500 mm široka * Okrogla vtičnica NATO na priključni letev spredaj (Maeler & Kaege VG 96 917) * Na gosji vrati 1 par vstavljivih aluminijastih stranskih platen, približno 400 mm visoke, v anodizirani izvedbi * 1 LED delovna luč, nameščena na levi in desni strani sprednje stene na vrhu, upravljanje preko vklopno/izklopnega stikala (upravljanje delovnih luči iz SZM v tem primeru ni mogoče) TOVORNI PROSTOR: * Tovorni prostor, dolžina približno 9.600 mm, z poševnostjo na zadnji strani približno 900 mm x 6° * Tovorni prostor za gosjo vratjo je hidravlično dvigljiv in spuščljiv, dolžina približno 3.000 mm, nosilnost do približno 9.000 kg * Na dvižni platformi in tovarnem prostoru neprekinjena rešetkasta površina z približno 5 mm jekleno podlago kot dodatna ojačitev, zasnovana za točkovno obremenitev PNEVMATIKE: 235/75 R 17.5 3PMSF, dvojne pnevmatike. Proizvajalec po naši izbiri * Sistem za nadzor tlaka v pnevmatikah (TPMS) v skladu z ECE R 141 OSI: * BPW osi in vzmetenje, 1. in 2. os fiksni, 3. os z zadnjim krmiljenjem * 3. os z elektromagnetno blokado za vzvratno vožnjo, ki se aktivira preko vzvratne prestave in ročno * 1. os z asistenco pri speljevanju * Tehnična obremenitev osi: 12.000 kg na os * Zračno vzmetenje z ventilom za dvig in spuščanje HIDRAVLIČNE RAMPE: * 1 par dvodelnih jeklenih ramp AXS z rešetkasto površino, dolžina približno 4.920 mm in širina približno 900 mm * Hidravlično odpirajoče se konice ramp * Rampe je mogoče posamično hidravlično premikati približno 235 mm navzven in približno 365 mm navznoter * Luči na zunanji strani konic ramp, stikalo poleg upravljanja ramp * Varnostno zaklepanje ramp v vožnji s hitro zaporo * Premazana peskana površina na zunanjem okvirju rampe in na konici rampe * Mehanske opore v obliki padajoče cevi, nameščene ob straneh ramp za podporo pri priključitvi na nakladalne rampe * Upravljalni ventili za hidravlične rampe na desni strani vozila ZAVORNI SISTEM: Zavorni sistem proizvajalca WABCO EBS-E v skladu z uredbami EU OBLIKOVANJE POVRŠINE: * HRM-metalizacija celotnega šasije vozila z ZINACOR 850 (85 % cink/15 % aluminij) za zagotavljanje najboljše zaščite pred korozijo LAKIRANJE: * Prikolica karminsko rdeča (RAL 3002) * Platišča srebrno siva * Stranske platne aluminijaste naravne barve * Pestne osi po proizvajalcu osi * Tabela z lučmi čisto bela (RAL 9010) OPREMA: * Sprednja stena iz jekla, vstavljiva, približno 1.600 mm visoka, vključno s priključno letev za oskrbovalne vodnike za SZM, nameščena približno 1.000 mm od spodnjega roba zunanjega okvirja * Možnost pritrditve pritrdilnih verig na notranji strani sprednje stene, levo in desno, vključno z aluminijasto kadjo pod njimi, na levi in desni strani za shranjevanje verig ali vrvnih zateg * Za sprednjo steno je privijana plošča DELIGNIT debeline približno 12 mm * 2 para privijačnih pritrdilnih obročev dodatno (LC 5.000 daN) * Električni vitel, vlečna sila približno 5.400 kg, z brezžičnim d

Stanje: rabljeno, največja dovoljena obremenitev: 35.600 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Izvleček – oprema: Gooseneck prikolica: Gooseneck prikolica v izvedbi SNT za optimizacijo dolžine tovornega prostora, dolžina približno 3.700 mm. Gooseneck prikolica na zadnji strani s poševnim robom približno 1.000 mm x 6°. Težavna obremenitev sedla: 18.000 kg Za SZM (posebno vozilo za prevoz): 4 x 2 in 6 x 2 Tovorni prostor: Raztegljiv tovorni prostor, dolžina približno 9.600 mm, s poševnim robom na zadnji strani približno 900 mm x 6°. Tovorni prostor za gooseneck prikolico je hidravlično dvigljiv in spuščljiv, dolžina približno 3.000 mm. Nosilnost do približno 9.000 kg Rampe: DR-10-900-4920-GR-HV-AXS Par dvodelnih jeklenih ramp AXS s dolžino približno 4.920 mm in širino približno 900 mm. Odprta rešetkasta površina. Hidravlično zložljivi končni deli ramp. Rampe je mogoče posamično hidravlično premikati približno 235 mm navzven in približno 365 mm navznoter. Maksimalna obremenitev in naklon glede na tehnično specifikacijo: C470319 Maksimalni naklon pri spuščenem tovornem prostoru: približno 9° Osi in vzmetenje: Osi in vzmetenje BPW, 1. in 2. os fiksna, 3. os s sistemom sledenja. Težavna obremenitev osi: 12.000 kg Elektro-magnetna blokada za vzvratno vožnjo, aktivira se prek vzvratne prestave in ročno. Zračno vzmetenje z ventilom za dvig in spuščanje. Komplet orodij za osi. Zavorna naprava: Zavorna naprava blagovne znamke WABCO EBS-E v skladu z direktivami EU. Brez povezovalnega kabla za vlečno enoto. Pnevmatike: 235/75 R 17.5 3PMSF, dvojne pnevmatike. Proizvajalec po naši izbiri. Indeks nosilnosti 143/141J (144/144F) Barvanje: 6-plastna končna obdelava: Celotna jeklena konstrukcija po varjenju peskana. 1 plast osnovne barve na podlagi cinka, 1 plast prajmerja. Končna barva z 2 plastmi 2-komponentne barve (akril), enobarvna v barvi RAL 3002 karmin rdeča, nato zapiranje votlin s posebnim voskom. Platišča v srebrni barvi. Večbarvno in posebno barvanje proti doplačilu. Dodatna oprema (vključno): - ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S in 15-polna. - 24N priključek v skladu s standardom ISO-1185 - 24S priključek v skladu s standardom ISO-3731 - 15-polni priključek v skladu s standardom ISO-12098 - 3 kW elektro-hidravlična enota za upravljanje hidravličnih funkcij, razen hidravličnih vitlov. - Parkirni položaj na gooseneck prikolici za opozorilne table, ko niso v uporabi. - Zunanji nosilec na gooseneck prikolici z luknjami za pritrditev vijakov za pritrdilne obroče. - Prva luknja je približno 200 mm od sprednjega roba, nato približno vsakih 400 mm. - Ena luknja za pritrditev na zadnji zgornji strani zunanjega nosilca gooseneck prikolice za vijak za pritrdilni obroč. - 1 par vijakov za pritrdilne obroče (LC 10.000 daN). - 3 pari vgrajenih pritrdilnih obročev v notranjosti zunanjega nosilca gooseneck prikolice (LC 5.000 daN). - 3 pari vgrajenih pritrdilnih obročev na sredini gooseneck prikolice (LC 5.000 daN). - 1 par vgrajenih pritrdilnih obročev na zadnji strani na sredini gooseneck prikolice (LC 5.000 daN). - Na gooseneck prikolici in poševnem robu rešetkasta površina s približno 5 mm jeklene pločevine za dodatno okrepitev. - 2 palčni kraljevi zatič. - Vodilna plošča na gooseneck prikolici za sedežno ploščo, široka približno 500 mm. - Mehanske podpore sedla z 2-stopenjsko prestavo in ročico. - JOST Modul B - statična preizkusna obremenitev = 50.000 kg - Neprekinjena rešetkasta površina z 5 mm podlago iz jeklene pločevine kot dodatna okrepitev, zasnovana za točkovno obremenitev: Tedpfxezkx Hbj Af Hja - Zaklepanje tovornega prosto

Stanje: novo, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. - Gooseneck in SNT design to optimize the platform length, approx. 3,700 mm long, rear with a chamfer of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic power pack to control hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper section of the outer beams of the gooseneck for a bolted lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the outer beam of the gooseneck (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - The gooseneck and rear chamfer feature grating flooring with 5 mm steel reinforcement - 2-inch king pin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable to supply the electro-hydraulic power pack and/or the electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) - On the gooseneck: 1 pair of detachable aluminum side walls, approx. 400 mm high, anodized finish LOAD PLATFORM: - Load area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° - Loading platform behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered. 3rd axle with electro-magnetic reverse lock activated via reverse gear and manually - Technical axle load: 12,000 kg each Tsdpfx Asyhkquof Hja - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand at our discretion, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel underlay as additional reinforcement, designed for point loads: - on the lift bed - on the load platform - Painted sand coating on the cover plates of the gooseneck as well as transition areas between gooseneck and lift bed, lift bed and load platform, and between load platform and ramps - 1 spare wheel mounting bracket under the load platform, right side before the axles - Cutouts in the outer frame of the platform and lift bed for hooking in tension belts (LC 2,000 daN) - 11 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the platform - 11 pairs of recessed lashing rings along the central girder (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear part of the platform - Control valves for the hydraulic ramps on the right side of the vehicle - 1 pair of foldable mechanical rear supports with one-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a...

Stanje: rabljeno, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2021, skupna širina: 3.000 mm, skupna višina: 3.760 mm, Oprema: ABS, * lastna hidravlična enota * hidravlično pomične nakladalne rampe * 4 hidravlične dodatne opore * hidravlično podaljšljivo nizkotilno prikolico (3000 mm) * razširljivo nakladalno površino (500 mm) * AXION radijsko napravo z daljinskim upravljalnikom * gooseneck prikolica z bočnicami in predalom za shranjevanje * hidravlično krmljene osi ----* Wabco Trailer EBS-E prikolica * SAF osi z bobnastimi zavorami * Wabco SmartBoard enota * nizkotilna prikolica z nastavljivo višino * vzvratna kamera * telematika ----Naslednja dela je podjetje ES-GE Nutzfahrzeuge izvedlo februarja.* Bobni, zavorne obloge in zavorne čeljusti, zavorne gume, puše in nastavitvene matice na vseh 4 osi so bili zamenjani. * Glave vzmetnih palic so bile zamenjane. * Ležaji nosilcev osnih ročic na TwinAxle II so bili zamenjani. * Električna napeljava za osvetlitev je bila popravljena. * Hidravlični akumulator je bil zamenjan. * EBS je bil popravljen. Todpfxszbw N Re Af Hsa * Električna črpalka je bila preverjena. * HD-olje in filter sta bila zamenjana. * Lufta v osi je bila preverjena. * Centralno mazanje je bilo preverjeno. * Ročice vzmetenja so bile popravljene. * Senzorji za nastavitev višine so bili popravljeni. * Razdelilna škatla na sprednji strani je bila popravljena. * Lesena podlaga je bila popravljena. * Pokrovne plošče so bile popravljene. * Rezervoar za stisnjeni zrak je bil ponovno nameščen. * Ležaji koles so bili preverjeni. ----* Dimenzije pnevmatik: 245/70R17,5 * tehnično dovoljena skupna masa: 73000 kg * lastna masa: 14600 kg * skupna dolžina: 13200 - 16200 mm * skupna širina: 2540 - 3000 mm * prevoženi kilometri: 194000 km * naslednji tehnični pregled: 09.2026 ----Številka vozila/Vehicle: 12154----Pridržane pravice glede napak in vmesne prodaje----Oglasna sporočila in različni napisi so bili digitalno odstranjeni.----Z veseljem vam bomo pomagali pri vseh formalnostih, ki nastanejo pri nakupu vozila. Samo sporočite nam vaše želje in predloge, mi pa se bomo potrudili, da vam ugodimo. Med drugim vam lahko proti doplačilu ponudimo naslednje storitve:* Sprejem vašega starega vozila * Izvedba tehničnega pregleda/Sonderuntersuchung (SP) * Celovit postopek izvoza * Posredovanje pri financiranju * Urejanje izvoznih registrskih tablic * Prevoz vozil * Registracija vozil * Odvoz in transport vozil ----Vaša ekipa VTS

Stanje: rabljeno, največja dovoljena obremenitev: 49.900 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, naslednji pregled (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single extendable loading deck, wheel recess, with rear chamfer and loading ramps Dimension B 11,300 mm Unladen weight 15,100 kg STZ-L Gooseneck - robust steel welded construction - formed loading area 3,900 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) - ball-bearing turntable saddle plate with replaceable 2" king pin and adjustable steering wedge Tsdjy Iq Tdepfx Af Hoa - mechanical landing gear at the front Loading Platform - single telescopic, designed as an outer-inner tube construction with a fixed 300 mm section at the front - 300 mm sliding table on the inner tube, movable and lockable - locking of the extension stages via spring-loaded cylinders and conical pins - 1 pair of wheel recesses behind the 1st axle, depth 410 mm Chassis - 4-axle air-suspended chassis -1st axle is liftable and steered - SAF axle assembly, including three hydromechanically forced steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Raise/lower valve as standard for lowering to a minimum of 805 mm, or raising to a maximum of 1,050 mm - Loading height 860 mm - Excavator boom recess 3,850 mm long, 750 mm wide - Wheel recess behind gooseneck 410 mm deep - Wheel recess behind the 1st axle 410 mm deep Rear End - Design: "500 mm rear chamfer" - Short 1,240 mm rear overhang from the center of the last axle - Hydraulic rear support Loading Ramps - 2-piece loading ramps, length 2,855 mm / 1,415 mm, width 890 mm - Hydraulic ramp adjustment Brake System - 2-line, all-wheel compressed air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special Equipment - Wheel recess - Boom recess - Extendable widenings - Central lubrication system "BekaMax" - Electric power unit with radio remote control Technical Data Gooseneck Loading area (LxW): 3,900 x 2,480 mm 1,000 mm slope for Wirtgen machines Coupling height loaded: 1,250 mm Loading Platform Loading area (LxW): 8,800 x 2,550 mm Extendable by 2,800 mm Stepped up to (LxW): 11,600 x 2,550 mm Steering 1st axle liftable and steered 2nd to 4th axle hydromechanically forced steered (dual-circuit steering) Radio remote control Electric power unit

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2009, Naprodaj je Faymonville MultiMAX 4-osni pol-prikolica nizkoploščad / globoka prikolica iz leta 2009 z dovoljeno skupno maso 71.000 kg. Prikolica ima 4 osi in hidravlične nakladalne rampe. Izjemno primerna je za prevoz gradbenih strojev, delovnih strojev, nakladalnikov, bagrov, goseničarjev in težkih gospodarskih vozil. Proizvajalec: Faymonville Model / Tip: MultiMAX / TL STZ-4AU Vrsta vozila: pol-nizkoploščad / nizkoploščadna polprikolica Prva registracija: 26.02.2009 Št. šasije / VIN: YAFTL409100009798 Število osi: 4 Dovoljena skupna masa: 71.000 kg Lastna masa po homologaciji: 16.800 kg Nosilnost (preračunano): pribl. 54.200 kg Obremenitev na os: 11.500 kg Obremenitev na zatič (pivot): 25.000 kg Dolžina vozila po homologaciji: 17,76 m Tjdpfxszhu A Hs Af Hoa Širina po homologaciji: 2,76 m Barva: bela / bež 4-osna pol-nizkoploščad Hidravlične nakladalne rampe zadaj Razširljiva nakladalna površina / stranske razširitve Globokonosna izvedba za prevoz strojev Podporne noge spredaj Stranska orodjarna / zaboj za shranjevanje Rezervno kolo na labodjem vratu Privezne točke vzdolž nakladalne površine Robusten jeklen okvir Labodji vrat izvedba Osvetlitev in opozorilne table zadaj Primerna za prevoz težkega tovora in gradbenih strojev Krmarjena os = Dodatne informacije = Lastna masa: 16.800 kg Nosilnost: 54.200 kg Skupna dovoljena masa: 71.000 kg

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni izrezi * Hidravlične nakladalne rampe, nastavljive po širini * Zračno vzmetenje * Možnost razširitve * Lastna teža: 11.020 kg ----Interna številka vozila: 11010----Napake in vmesna prodaja pridržane. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite udobno preko WhatsAppa Tedpfxewta Alj Af Hoa WhatsApp nemško, angleško -- WhatsApp nemško, angleško, arabsko

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) Tedjy Auh Ijpfx Af Hoa * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Tedpfxorvw U So Af Hsa Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide • Load area locking with conically welded arresting profiles every 250 mm • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon

Stanje: novo, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Further vehicles available – excerpt from the equipment list. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design for optimized loading bed length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Front steel bulkhead, plug-in, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions (excluding hydraulic winches) * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair horizontal lashing rings at the rear section of the gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair removable ALU side boards approx. 400 mm high, anodized finish * On the gooseneck: 1 removable ALU rear board approx. 400 mm high, anodized finish * Over the gooseneck: approx. 40 mm hardwood flooring, over the king pin checker plate covering * 3.5-inch king pin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 2 pairs of suspended lashing rings with retaining spring on the outer beams of the gooseneck (LC 5,000 daN) LOADING BED: * Loading bed, extendable version, length approx. 8,800 mm with chamfer at the rear approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced locking positions, supply lines are protected within the extendable beams and automatically adapt to the respective bed length * BPW axles and suspension, first axle hydraulically steered, all other axles hydro-mechanically forced steered * First axle with electro-magnetic reverse lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each Tedpfx Aexarmasf Hsa * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tyres – manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * Continuous hardwood flooring (approx. 50 mm thick) on the bed and between axles (interrupted), increasing friction coefficient. – Slots for attachable and adjustable bridging elements * At the front of the bed – 1 movable intermediate table approx. 300 mm wide for the large-section telescopic tube, with checker plate covering. – Front and rear slots for attachable and adjustable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed folding lashing rings on the outer frame of the bed (LC 10,000 daN) * Extensions (galvanized), extendable by approx. 230 mm per side (without wooden planks) * 1 pair mechanical rear supports * Remote-controlled steering from front and rear via cable remote control, with single-track control of axles, without installation in the tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Locking of the bed with conically welded retaining profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table approx. 300 mm wide, a mechanical lock for securing the table in the extension * 5 pairs of threaded blocks on the extendable beam for mounting M20 screw rings (LC 5,000 daN) BRAKING SYSTEM

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports Tsdpfx Aergzv Njf Hja * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps Tedpfx Afotx Nwnj Hsa * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 8.000 kg, dovoljena osna obremenitev (os 3): 8.000 kg, prva registracija: 11/2017, skupna dolžina: 135.000 mm, skupna širina: 2.540 mm, skupna višina: 780 mm, barva: črn, Leto izdelave: 2017, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje Tjdpfeyx Hwyox Af Hsa = Dodatne informacije = Konfiguracija osi Zadnja os 1: Največja osna obremenitev: 8000 kg Zadnja os 2: Največja osna obremenitev: 8000 kg; Krmiljena Zadnja os 3: Največja osna obremenitev: 8000 kg; Krmiljena Zadnja os 4: Največja osna obremenitev: 8000 kg; Krmiljena Teže Lastna teža: 14.800 kg Nosilnost: 42.200 kg Skupna dovoljena masa: 57.000 kg Stanje Tehnično stanje: dobro Optično stanje: dobro Poškodbe: nobenih Finančne informacije Cena: Na zahtevo Dodatne informacije Za več informacij se obrnite na David F Middelman.

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Maximum speed: 80 km/h (legal) Gross vehicle weight: 49,500 kg 31,500 kg Fifth wheel load: 18,000 kg Axle load: 31,500 kg 31,500 kg Gooseneck length approx.: 3,900 mm Tedpfoizu Ntjx Af Hja Gooseneck width approx.: 2,480 mm Turning radius king pin to rear approx.: 2,100 mm Coupling height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: ? Loading platform width approx.: 2,540 mm Load height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific legislation: Technical Description Gooseneck: Gooseneck in SNT design to optimize loading platform length, length approx. 3,900 mm, rear with bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4x2 and 6x2. Loading platform: Loading platform approx. 9,600 mm in length with rear bevel approx. 900 mm x 6°. Loading area after gooseneck hydraulically liftable and lowerable, length approx. 3,000 mm, load capacity up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS One pair of two-piece AXS steel ramps, approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Ramps individually hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward. Maximum load and ramp angle according to technical datasheet: C470319 Maximum gradient angle with lowered loading area: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tools. Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion Load index 143/141J (144/144F) Brake System: WABCO EBS-E brake system according to EU regulations. No connecting cable to the tractor unit included. Lighting System: 24V lighting system in "ASPÖCK-NORDIK full LED" version according to EU regulations. (ASS 3) Metallisation: Complete HRM metallisation (High Resistance Metallisation) Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%). 6-Coat Paint Treatment: Entire steel structure shot-blasted after welding. 1 coat zinc-based primer, 1 coat adhesion primer. Topcoat consisting of 2 layers of 2K paint (acrylic) in a single RAL shade of choice, followed by cavity sealing with special wax. Rims in silver. Multi-colour and special coatings available at extra charge. Steel Construction: High-strength fine-grain steel structure. Steel grades: S355J2+N/S355MC (min. yield strength 355MPa) S690QL/S700MC (min. yield strength 690MPa) Welders certified to DIN-EN 287-1. MAG-welding process to EN ISO 4063. Shielding gas M21 according to EN ISO 14175 Front bulkhead made of steel, detachable, approx. 400 mm high Connector strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin configuration deviates from the ISO standard, please inform us. Anderson socket at the front connection strip. Rema 78051-00 & Amp. 150 V. Cable for supplying the electro-hydraulic power unit and/or

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 20.000 kg, največja dovoljena obremenitev: 120.000 kg, konfiguracija osi: 3 osi, stanje pnevmatik: 70 odstotek, barva: rdeča, Leto izdelave: 2006, 3 dvižne in krmilne osi. Hidravlično vzmetenje. Tedpfxsyaaz Hj Af Hja Višinsko nastavljiv vrat. Pomožni bencinski motor Hartz. Neodvisno brezžično krmiljenje. Hidravlične zadnje rampe za strojno obremenitev do 70 ton.

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, skupna dolžina: 13.750 mm, skupna širina: 2.540 mm, Oprema: ABS, Številka vozila: YAFSR3003J0021354 TELESKOPSKA PODALJŠANJE do 8.200 mm NOSILCI ZA KONTEJNERJE WADER za 1 x 20", 2 x 20", 1 x 40", za 45-palčne kontejnerje DE, HU – pregled bo potrebno opraviti SAF osi s bobnastimi zavorami 3 osi, hidravlično-mehansko krmiljene, nameščene na vrtljivi plošči s kabelskim in radijskim daljinskim upravljanjem Samodejno usmerjanje Dimenzije platforme: 13.500 mm – višina nakladalne površine: 1.100 mm Višina sedelne sklopke: 950 – 1.050 mm Polmer obračanja v zadnjo smer: 2.100 mm Reže za nosilce v podu, vključno z nosilci (celovitost ni zagotovljena) NATO vtičnica Elektrohidravlična enota Luči za označevanje širine Todpfx Aozp S Ezsf Hja Orodjarna Centralni sistem za podmazovanje Pnevmatike: 235/75 R 17,5 Nosilec za rezervno kolo, VKLJUČNO z rezervnim kolesom Pridržujemo si pravico do sprememb, vmesne prodaje in napak. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v smislu pogodbenega prava. Odločilna je informacija, navedena v pogodbi o prodaji. Naša ponudba na splošno ne vključuje novega tehničnega pregleda. Če je nov tehnični pregled zaželen, vam z veseljem pripravimo ponudbo naših partnerskih servisnih centrov! Vozilo je lahko opremljeno z reklamami in/ali oznakami. Veljajo naši splošni pogoji dobave in plačila.

Stanje: rabljeno, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, skupna širina: 2.540 mm, skupna višina: 3.380 mm, Oprema: ABS, Številka vozila: YAMT23XX3K0104337 TELESKOPSKO podaljšanje do 7.300 mm ŽEPI ZA KONTEJNERJE WADER za 1 x 20", 2 x 20", 1 x 40", za kontejnerje velikosti 45" DE HU – veljavnost pregleda se izteka Os SAF s kolutnimi zavorami 3 x osi s prisilnim krmiljenjem, hidravlično-mehansko, z upravljanjem s kablom + daljinsko upravljanje Dimenzije platforme: 13.500 mm (od tega 500 mm s poševnim robom) – višina nakladalne površine: 1.100 mm Tir za pritrditev ramp Višina sedla: 950 – 1.050 mm Polmer obračanja v zadnjo smer: 2.100 mm Žepi za podpore v podvoju, vključno s podporami (celovitost ni zagotovljena) Vtičnica NATO – elektrohidravlična enota Luči za poudarjanje širine Orodjarna Centralni sistem za podmazovanje Pnevmatike: 235/75 R 17,5 Todpfxezn Drwj Af Hja Nosilec za rezervno kolo, VKLJUČNO z rezervnim kolesom Pridržujemo si pravico do sprememb, medprodaje in napak. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v pravnem smislu. Odločilna je opis v pogodbi o prodaji. Naša ponudba običajno ne vključuje novega tehničnega pregleda. Če je nov tehnični pregled zaželen, vam z veseljem pripravimo ponudbo naših partnerskih servisnih centrov! Vozilo je lahko opremljeno z reklamami in/ali oznakami. Veljajo naši splošni pogoji dostave in plačila.

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2017, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, skupna dolžina: 13.750 mm, skupna širina: 2.540 mm, skupna višina: 2.730 mm, Oprema: ABS, Številka vozila: YAFSR3005J0021355 TELESKOPSKO PODALJŠAN do 8.200 mm NOSILCI ZA KONTEJNERJE WADER za 1 x 20", 2 x 20", 1 x 40", v izvlečni obliki za 45-palčne kontejnerje DE/HU pregled potreben SAF osi s bobnastimi zavorami 3 osi s prisilnim krmiljenjem, hidravlično-mehansko, nameščene na vrtljivo ploščo z kabelskim upravljanjem in radijskim daljinskim upravljanjem Avtomatsko centriranje Tsdpjznqg Iofx Af Hea Dimenzije platforme: 13.720 mm - višina nakladalne površine: 1.100 mm Višina sedelne sklopke: 950 - 1.050 mm Polmer obračanja nazaj: 2.100 mm Reže za podpore v podu, vključno s podporami (popolnost ni zagotovljena) NATO vtičnica Elektrohidravlična agregatna enota Osvetlitev za povečano širino Orodjarna Centralno mazanje Pnevmatike: 235/75 R 17,5 Nosilec za rezervno kolo SREDIŠČNO nameščeno rezervno kolo Pridržujemo si pravico do sprememb, prodaje medtem in napak. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v smislu pogodbenega prava o nakupu. Odločilna je opis, določen v pogodbi o nakupu. Naša ponudba na splošno ne vključuje novega tehničnega pregleda TÜV. Če želite nov tehnični pregled TÜV, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo je lahko oblepljeno in/ali označeno z oglaševanjem. Veljajo naši splošni pogoji dostave in plačila.

Stanje: rabljeno, največja dovoljena obremenitev: 32.000 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2022, Leto izdelave: 2022, Oprema: ABS, * Faymoville F-S43-1AAF * dvižna platforma * krmilna os * vitel * platišča Alcoa * pnevmatike, približno 80 % preostale življenjske dobe Tjdjznqqgspfx Af Hja * leto proizvodnje 2022 * odlično stanje * delovni čas od ponedeljka do petka: 07:30–12:00, 13:00–18:00, ob sobotah: 07:30–17:00. * E-pošta: * Tel/WhatsApp/Viber: Aleksander Ilić * Tel/WhatsApp/Viber (angleško): Mladen Ilić

Stanje: rabljeno, Leto izdelave: 2007, 2007 | Faymonville STBZ3 | Nizkotilna prikolica 📍 Lokacija: Nemčija 🚛 Dostava je možna do vaše lokacije – uporabite naš kalkulator za oceno stroškov prevoza! 💰 Kupite zdaj za 40.700 EUR ali oddajte ponudbo. Plačilo ob dostavi je na voljo za ugodno provizijo (ob odobritvi)* 👷‍♂️ Preverjeno s strani neodvisnega strokovnjaka 2 kontrolni točki, 2 odobreni ✅, 0 nepravilnosti ℹ️, 0 stroškov ⚠️ 📌 Opomba inšpektorja: Nizkotilna prikolica, ki potrebuje še nekaj popravil karoserije. Opremljena je z lastno hidravlično napravo. 📄 Želite si ogledati celotno poročilo o pregledu, dodatne fotografije ali video? Namig: Referenčna številka »40866 Equippo« se pogosto uporablja pri iskanju dodatnih podrobnosti na spletu. 💡 Zakaj je ta stroj in naša storitev posebna: Todpfxsznmcls Af Hea ✔ Temeljit pregled s strani strokovnjakov ✔ Dostava na gradbišče je možna ✔ Garancija za vračilo denarja ✔ Varne in fleksibilne možnosti plačila 🔄 Razmišljate o drugih možnostih opreme? Ponujamo uporabna orodja in vire za vse lastnike in uporabnike opreme – zlahka dostopne na naši platformi.

Stanje: rabljeno, največja dovoljena obremenitev: 31.100 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2013, Leto izdelave: 2013, Oprema: ABS, * Faymonville F-S43-1ABA nizkopodvozna prikolica * Datum prve registracije: 03-2013 * hidravlično dvigovanje * hidravlično pomična dvojna zložljiva stranska ograja * vključno z vrvnim vitlom z radijskim upravljanjem * 3. os s krmiljenjem * osi SAF * zračna vzmet Tjdpfx Afszq Nups Hsa * bobnasta zavora * največja dovoljena masa: 10.900 kg * največja tehnično dovoljena masa: 31.100 kg * največja dovoljena skupna masa: 42.000 kg * pnevmatike 235 / 75 R 17,5 * več slik in videoposnetkov pošljemo prek aplikacije WhatsApp * Podatki so zgolj informativni in ne zavezujejo, pridržana pravica do spremembe.

Stanje: rabljeno, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, skupna širina: 2.540 mm, skupna višina: 3.380 mm, Oprema: ABS, Številka vozila: YAMT23XX3K0104336 TELESKOPSKO podaljšanje do 7.300 mm Tedpfozmbv Rjx Af Hja ŽEPI ZA KONTEJNERJE WADER za 1 x 20", 2 x 20", 1 x 40", z možnostjo prevoza 45-palčnega kontejnerja Pregled DE HU je potreben SAF osi s kolutnimi zavorami 3 x osi s prisilnim krmiljenjem, hidravlično-mehansko, z nadzorom preko kabla + daljinsko upravljanje Dimenzije platforme: 13.500 mm (od tega 500 mm pod kotom) - višina nakladalne površine: 1.100 mm Nosilna tirnica za rampe (BREZ ramp) Višina sedla: 950 - 1.050 mm Polmer obračanja nazaj: 2.100 mm Žepi za stranske nosilce v dnu, vključno s stranskimi nosilci (ni zagotovljena popolnost) NATO vtičnica – elektro-hidravlična agregatna enota Osvetlitev za povečanje širine Orodjarna Centralni sistem za mazanje Pnevmatike: 235/75 R 17,5 Nosilec za rezervno kolo Z rezervnim kolesom Pridržujemo si pravico do sprememb, prodaje medtem in napak. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v pravnem smislu nakupa. Odločilna je opis, naveden v pogodbi o prodaji. Naša ponudba na splošno ne vključuje novega tehničnega pregleda (TÜV). Če je nov tehnični pregled zaželen, vam z veseljem ponudimo ponudbo naših partnerskih servisov! Vozilo je lahko opremljeno z reklamami in/ali napisom. Veljajo naši splošni pogoji dobave in plačila.

Stanje: rabljeno, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, prva registracija: 10/2019, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, skupna širina: 2.540 mm, skupna višina: 3.380 mm, Oprema: ABS, Številka vozila: YAMT23XXXK0104334 TELESKOPSKO podaljšanje do 7.300 mm NOSILCI ZA KONTEJNERJE WADER za 1 x 20", 2 x 20", 1 x 40", možnost pritrditve 45-palčnih kontejnerjev DE HU – pregled izteče – SP 12.2026 Os SAF s kolutnimi zavorami 3 x vgrajene osi s hidravlično-mehanskim krmiljenjem + upravljanje s kablom in daljinskim upravljanjem Dimenzije platforme: 13.500 mm (od tega 500 mm pod kotom) – višina natovarjanja: 1.100 mm Nosilna palica za nagibne rampe (BREZ ramp) Višina sedla: 950 – 1.050 mm Polmer obračanja v nazaj: 2.100 mm Žepi za podpore na dnu, vključno s podporami (celovitost ni zagotovljena) NATO vtičnica – elektro-hidravlična agregat Osvetlitev za širitev Orodjarna Tedpezlvt Usfx Af Hoa Centralni sistem za podmazovanje Pnevmatike: 235/75 R 17,5 Nosilec za rezervno kolo Z rezervnim kolesom Pridržujemo si pravico do sprememb, prodaje in napak. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v pravnem smislu nakupa. Odločilni sta opis v pogodbi o nakupu. Naša ponudba na splošno ne vključuje novega tehničnega pregleda. Če želite nov tehnični pregled, vam z veseljem ponudimo ponudbo naših partnerskih servisov! Vozilo je lahko oblepljeno in/ali označeno z reklamami. Veljajo naši splošni pogoji dostave in plačila.

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, dolžina tovornega prostora: 13.720 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, Oprema: ABS, Vehicle identification no.: YAFSR3001J0021353 Extendable by 8,200 mm with sliding table Tedpfx Afeyw Dl Ee Hoa Container pockets WADER for 1 x 20", 2 x 20", 1 x 40", extendable to 45" container German MOT (HU) valid until 02/2027 – Safety inspection (SP) until 08/2026 SAF axles with drum brakes 3 hydraulically-mechanically steered axles on turntable with cable control and radio remote control Automatic self-tracking Platform dimensions: 13,720 mm – loading height: 1,100 mm Fifth wheel height: 950 – 1,050 mm Rear steering angle: 2,100 mm Stake pockets in the floor, including stakes (completeness not guaranteed) NATO socket Electro-hydraulic power unit Width marker lighting Toolbox Central lubrication system Tyres: 235/75 R 17.5 Spare wheel holder WITH spare wheel Modifications, prior sale, and errors excepted. This description serves for general vehicle identification and does not constitute a warranty in the legal sense of sale of goods law. The specification in the purchase contract is decisive. Our offer is generally without new TÜV (MOT) approval. If a new TÜV approval is required, we can provide an offer through our partner workshops! The vehicle may be equipped with stickers and/or advertising. Our general terms and conditions of delivery and payment apply.