Es-Ge Tandemanhänger - Bordwände, Cv nakup rabljenega (15.727)

Stanje: novo, največja dovoljena obremenitev: 15.825 kg, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles, including units available for immediate or short-term delivery, on our website. Excerpt from equipment specification. Full equipment details available upon request. Chassis: * Steel welded construction made of welded longitudinal beams and punched Z-cross members, close cross member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly under the load floor, two insertion slots for one ramp each, with locking plate in the rear header frame Underride guard: * According to EC regulations Front landing gear: * Single-sided operated landing legs Rear support: * Two adjustable drop legs Axles: * 2 x 10 t air suspension axle assemblies, manufacturer SAF, drum brakes approx. 300 x 200 mm, hub-centered wheel fixing for twin tyres, ABS, total air suspension travel approx. 200 mm (raise approx. 140 mm, lower approx. 60 mm), operated by hand lever with ratchet function Tyres: * 8 units, 235/75R 17.5 – make as per our choice, on steel rims 6.75 x 17.5, fitted with offset Splash protection: * PVC spray guards in front of and behind axles, EC compliant Load securing: * On the outer frame approx. every 150 mm a hole for lashing straps, tensile strength approx. 2.5 t (lashings can be hooked in with side walls closed, bevelled outer frame) * 6 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 8 t * Stake pockets for removable stanchions 80/50: 3 pairs of stake pockets on the outer frame, evenly distributed Brake system: * Compressed air brake system according to EC regulations with EBS * Two spiral hoses as connection to the towing vehicle with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame Front wall: * Made from 25 mm removable front board Lighting system: Bodpfxoy Auhbj Al Hslg * Lighting in accordance with EC regulations, 24 volt, multi-chamber tail lights, number plate lights, side marker lights and lane control lights at the rear, connection plate on the left of the drawbar including connection cable with 15-pin and two 7-pin plugs Accessories: * 2 wheel chocks with holders * Removable warning beacon at the rear * Additional 40 mm coupling device supplied (max. GVW 13,500 kg) * Rear extension approx. 800 mm including underride guard, extendable loading platform with load capacity approx. 2 t, locking positions every approx. 200 mm * Mechanically adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolt-on towing eye approx. 50 mm as per DIN 74053 * 4 rows of crosswise stake pockets evenly distributed across the loading platform * 12 removable stanchions made of galvanized pipe, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for one 20’ container, container locks extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair aluminum ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 pieces of 25 mm side walls and a rear wall made of anodized aluminum hollow profiles, approx. 600 mm high, foldable and removable, removable Kinnegrip stanchions (internal width approx. 2,480 mm), includes side wall holder at front wall Paintwork: * Chassis shot-blasted, cleaned, and hot-dip galvanized to latest standards * Structure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized & RAL 3002 carmine red * Side walls: RAL 3002 carmine

Stanje: novo, največja dovoljena obremenitev: 16.180 kg, skupna masa: 20.500 kg, konfiguracija osi: 2 osi, skupna širina: 2.480 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and soon-available stock on our website. Excerpt from the features list. Full specification available on request. Chassis: * Welded steel construction with welded longitudinal beams and perforated Z-cross members, closely spaced cross members for high floor load capacity * Ramp compartment: between the longitudinal beams, behind the axle assembly underneath the loading floor, two insertion pockets for one each loading ramp, with locking plate in the rear headframe Underrun Protection: * According to EU regulations Landing Gear: * Front: landing legs with one-sided operation * Rear: two adjustable drop supports Axles: * 2 x 10 t air suspension axle assembly, manufacturer SAF, drum brakes approx. 300 x 200 mm, center-aligned for twin tires, ABS, total air suspension stroke approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), operated via hand lever with detent function Tires: * 8-fold, 235/75 R17.5 – our choice of brand. Mounted on 6.75x17.5 wheels with offset Spray Protection: * PVC, in front of and behind the axles, according to EU regulations Load Securing: * On outer frame, approx. every 150 mm, a hole for lashing straps, tensile strength approx. 2.5 t * 6 pairs of foldable lashing rings evenly distributed, tensile strength approx. 8 t Blsdpfx Alsy Auf To Hjg * Stake pockets for slip-in stakes 80/50: 3 pairs of stake pockets in the outer frame, evenly distributed Brake System: * Compressed air brake system as per EU standards with EBS * Two spirals as connection to the towing vehicle with red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor sunk into the outer frame Lighting System: * Lighting system as per EU standards, 24 volts, multi-chamber tail lights, license plate lights, side marker and track marker lights at the rear, connection plate on the left drawbar, incl. interconnection cable with 15-pin and 2 x 7-pin connectors Accessories: * 2 wheel chocks with holder * Removable flashing beacon at the rear * 40 mm towing device supplied (max. gross weight 13,500 kg) * Rear extension approx. 800 mm including underrun protection, extendable loading platform with load capacity approx. 2 t, locking positions every 200 mm * Mechanically length-adjustable rigid drawbar, 6 x approx. 100 mm, with bolted towing eye approx. 50 mm as per DIN 74053 * 4 rows of crosswise stake pockets across the load floor, evenly distributed * 12 galvanized steel stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20’ container * Container locks for 1 x 20’ container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Paintwork: * Chassis shot-blasted, cleaned, and high-quality hot-dip galvanized to the latest technical standards * Superstructure parts cleaned, primed, and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 9011 graphite black * Outer frame: hot-dip galvanized + RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Add-on parts: galvanized / KTL black

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website. Extract from the equipment. Complete equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads * Underrun beam approx. 700 mm wide * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm * Neck height at the front approx. 130 mm Coupling Equipment * 2-inch king pin Underrun Protection * Bolted version according to EC regulations Side Impact Protection * According to EC regulations, made from anodised aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR) Axles * 3 x 9 t air suspension axles with disc brakes, 22.5" * Total lift approx. 180 mm * Lifting and lowering device via rotary valve Brake System * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Mudguards * According to EC regulations Spare Wheel Carrier None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t * In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles Bledpfsw U H Sbsx Al Hjg Lighting System * According to EC regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED outline lights rear * Licence plate lights * Lane marker lights, LED * 1x15- and 2x7-pin plug sockets at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning signs * Bracket for rotating beacon, incl. rotating beacon * 2 rear rubber buffer stops * Access ladder rear right, foldable and extendable (without platform) * 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: single-colour RAL as per request * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single-colour RAL as per request * Centre stanchions: single-colour RAL as per request * Side underrun protection: aluminium, anodised * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised/KTL black * Rims: silver Contour Marking * Complete, yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm * Internal magazine for 20 plug-in stanchions on the front wall * 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion

Stanje: novo, največja dovoljena obremenitev: 32.155 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, with immediately and short-term available vehicles, on our website. Excerpt from the equipment. Complete equipment details on request. Chassis: * Welded construction made from high-quality steel profiles with punched cross-members. Designed for high point loads. Coupling Device: * Fifth wheel plate with 2-inch kingpin. Underrun Protection: * In accordance with EC regulations, bolted design. Side Protection: * In accordance with EC regulations. Landing Legs: * 2 x 12 t landing legs with compensating foot and single-side operation (right side in driving direction). Axles: * 3 x 9 t air-suspension axle assemblies, SAF make, with disc brakes approx. 430 x 45 mm, centrally aligned wheel connection ET120, ABS, total air suspension lift approx. 180 mm (lift approx. 110 mm, lower approx. 70 mm). * Air suspension control via manual regulator with stop function. Bljdpjy Auhzsfx Al Hjg Steering: * Last axle steered automatically by rod linkage. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Brake System: * Dual-circuit compressed air brake system in accordance with EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, swap-proof coupling heads fixed to the front cross member, without connecting line to the truck. * Manufacturer: Wabco. Tyres: * 6 x, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 rims – brand of our choice. Incl. tyre pressure monitoring, tyre pressure display in driver’s cab (pre-installed by chassis manufacturer). Mudguards: * In accordance with EC, 1/4 PVC fenders in front of and behind the axle assembly. Load Securing: * 9 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 8.0 t each). * 8 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 2.5 t each). * On the outer frame, holes every approx. 500 mm for lashing straps (lashing straps can be hooked in with side boards closed; chamfered outer frame). Stanchion Pockets: * 10 pairs of stanchion sockets on the outer frame, evenly distributed. * 4 rows of stanchion sockets across the loading area. * Plug-in stanchions: 20 pieces, galvanized pipe approx. 80/50 mm, total length approx. 1,000 mm. * Rack inside front wall for 20 plug-in stanchions. Front Wall: * Reinforced steel construction, fixed, lined inside with approx. 9 mm phenolic plywood (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor fitted into the outer frame. Sideboards: * 4 x 250 mm side boards and rear wall made from anodized aluminium hollow profiles, folding down and removable, removable Kinnegrip stanchions. * Sideboard and stanchion magazine: under the chassis. * Insertion rails for sideboards and stanchions on left and right. Lighting System: * In accordance with EC, 24 volt with multi-chamber lamps, LED side marker lamps, LED position lights front white, LED contour lights rear, number plate lights. * 1 x 15-pin and 2 x 7-pin socket connectors on front cross member. Equipment: * Wheel chocks with double holder. * Warning signs according to ECE 70. * Work spotlight on lamp bracket (actuated via reverse gear). * Bracket for beacon at rear, including beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paintwork: * Chassis and front wall cleaned by sandblasting, primed and top-coated in single colour. * Chassis: hot-dip galvanized + RAL colour of your choice. * Front wall: RAL colour of your choice. * Sideboards: anod

Stanje: rabljeno, največja dovoljena obremenitev: 32.610 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, naslednji pregled (TÜV): 11/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with those available immediately and at short notice on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with through crossmembers, designed for high point loads Coupling System: * 2-inch kingpin Underrun Protection: * Bolted design, compliant with EC regulations Side Guard: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and single-sided operation, positioned FR right Axles: * 3 x 9 t air suspension axle units * Disc brakes * Make: Gigant Brake System: * Two-line air brake system complying with EC, featuring EBS and RSS, automatic load-dependent braking force distribution * Spring brake cylinders as parking brake * Mix-up-proof coupling heads permanently mounted on the front beam, without connecting line to tractor unit * Make: Wabco Tyres: * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Holder: * 1 double basket with mounting kit for a spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.5 t * Outer frame drilled approx. every 500 mm for lashing straps Front Wall: * Reinforced steel construction, fixed * Interior covered with approx. 9 mm phenolic overlay plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Lighting System: * EC compliant, 24 volt, with multi-chamber tail lights * LED side marker lights * LED front position lights (white) * LED rear outline lights * Number plate lights * 1x 15-pin and 2x 7-pin sockets on front beam Painting: * Chassis and front wall cleaned by sandblasting, primed, and painted in solid color * Chassis: RAL 3002 carmine red * SSV: aluminum anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Rims: silver Incl. special equipment: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * 20 stakes made from galvanized tube 80/50, total length approx. 1,000 mm * Interior of the front wall with magazine for 20 plug-in stakes * Container locks for 1 x 40' and 2 x 20' containers, flush with rear * Container locks for 1 x 20' container centered * Work lamp on lamp bracket (activated via reverse gear) Bljdpfx Aljwyhy Es Heg * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Our complete range of vehicles with immediate and short-term availability can be found on our website. Extract from the specification. Full equipment list available on request. Chassis: * Welded construction using high-quality steel profiles with through cross members, designed for high point loads * Underrun nose width approx. 700 mm * Outer frame as UNP profile * Scuff plate approx. 8mm * Neck height at the front approx. 130 mm Towing Equipment * 2-inch kingpin Underrun Protection * Bolted version, compliant with EC regulations Side Impact Protection * According to EC, made from anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-sided operation on front right Axles * 3 x 9 t air suspension axle units * 22.5" disc brakes * Total stroke approx. 180 mm * Lifting and lowering device operated by rotary slide valve Braking System * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Non-interchangeable coupling heads permanently mounted on the front crossmember, without connecting line to the truck Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET120 * Brand of our choice * Tyre pressure monitoring (TPMS) via EBS CAN bus system Mudguards * According to EC Spare Wheel Carrier * Not included Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.0 t * Holes for lashing straps in the outer frame at approx. 400-600 mm intervals Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Inner cladding with phenolic resin plywood, approx. 9 mm, height approx. 1,250 mm Floor * Approx. 28 mm hardwood floor set into the outer frame using galvanized omega steel profiles Lighting System * According to EC, 24 volt, with multi-chamber lights * LED side marker lights * LED position lights, white, front Bledougqvfspfx Al Heg * LED outline marker lights, rear * License plate lights * Lane marker lights, LED * 1x15- and 2x7-pin socket connectors on the front crossmember Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Holder for rotating beacon including rotating beacon * 2 rubber buffer stops at rear * Foldable and extendable access ladder at the rear right (without platform) * 1 open mesh box, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, located behind the axles Paintwork * Front wall: single RAL color of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + single RAL color of your choice * Side protection: aluminium anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Wheel rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in outer frame, evenly distributed * 4 rows of stanchion pockets transversely to loading area * 20 pieces of stanchions made of galvanized tube 80/50, total length approx. 1,200 mm * Magazine for 20 plug-in stanchions on inside of front wall * Container locks for 1 x 40’ and 2 x 20’ containers, flush with the rear * Container locks for 1 x 20’ container centered * Work light at lamp bracket (activated in reverse gear) * 2 stainless steel toolboxes, approx. 600x500x500 mm, 1 eac

Stanje: rabljeno, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2014, Leto izdelave: 2014, Oprema: ABS, * ES-GE 3-STL nizkopodna prikolica * Prva registracija: 04-2014 Bljdpoy Hzmrjfx Al Hjg * ABS * Kolesne vdolbine * Krmilna os * Lastna teža: 7.690 kg * Več slik in videoposnetkov prek WhatsApp * Podatki brez garancije, vmesna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 69.060 kg, skupna masa: 84.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2013, naslednji pregled (TÜV): 07/2026, skupna širina: 2.540 mm, Oprema: ABS, Celotno zalogo vozil, ki so na voljo takoj ali v kratkem času, najdete na naši spletni strani. Izvleček iz opreme. Celoten seznam opreme je na voljo na zahtevo. • Šasija iz visokokakovostnih QSTE drobnozrnatega jekla, s centralnim nosilcem, ni teleskopska • Pritrdilne zanke, pritrdilna sila približno 100 kN na zanko, zložljive • 4 pari žepov za stebre v območju nakladalnih stojal, približno 80 x 80 mm • Hidravlične opore (elektro-hidravlične) • 6 x 11.000 kg (tehnično), SAF osi • Zračno vzmetenje • 1. os vodilna, 2. os toga Bjdpfx Aloy Ikbho Hjlg • 3. – 6. os prisilno vodene • Tridec krmiljenje • Dodatno krmiljenje • Nato vtičnica • 1. os dvižna • Pnevmatike 265/70R19.5 • 3,5-palčni zatič, zamenljiv • Wabco ABS/EBS zavore • Jeklena sprednja stena, približno 400 mm visoka • 2 stranski steni na labodjem vratu • Barvanje enobarvno v RAL 3000 rdeči barvi

Stanje: rabljeno, lastna masa: 9.140 kg, največja dovoljena obremenitev: 28.860 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2007, dolžina tovornega prostora: 11.600 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: v tranzitu / na poti, 2 osi, zračno vzmetenje, zadnja os vodilna, ABS (protiblokirni sistem), razširljiv do 3 m, pritrdilna ušesa, hidravlične rampe, zadnja podpora, stranska aluminijasta zaščita, podpore, dvojna montaža pnevmatik. Nadgradnja: 2-osna nizkopodna polprikolica s hidravličnimi rampami. Vse informacije brez garancije, ker je polprikolica v tranzitu! Podatki o dodatni opremi brez garancije, spremembe, vmesna prodaja in napake pridržane! Bedpeyzgndsfx Al Holg

Stanje: rabljeno, Leto izdelave: 2000, ES-GE 4.vod-25-40.4-h13. Baujahr: 2000. 10 t SAF-Achsen. Eigengewicht: 16.840 kg. Blodjy Ay Efspfx Al Hjg Nutzlast: 45.660 kg. Gesamtgewicht: 62.500 kg. Sattellast: 22.500 kg. 2-fach ausziehbar: 10,4 Meter + 9,3 Meter = insgesamt 19,7 Meter ausziehbar. Hydraulik funktioniert über NATO-Anschluss vom Zugfahrzeug. Lenkachse: 4 gelenkte Achsen. Luftfederung. Werkzeugkästen. Maße Ladefläche: L: 16.000 mm. B: 2.550 mm. H: 1.500 mm. Sattelhöhe: 1.250 mm. Bereifung: 275/70R22,5, Profil 80%. Deutscher Auflieger! ID NR: 487. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für sämtliche Inserate, Angebote und Preisangaben sowie für alle mit Heinhuis abgeschlossenen Verträge und vorausgehenden Verhandlungen. Mit jeglicher Form der Kontaktaufnahme akzeptieren Sie die Geltung dieser Allgemeinen Geschäftsbedingungen und bestätigen, dass Sie deren Inhalt zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2000 Leergewicht: 16.840 kg Zuladung: 45.660 kg zulässiges Gesamtgewicht: 62.500 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für mehr Informationen: WhatsApp:

Stanje: novo, največja dovoljena obremenitev: 39.070 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from specifications. Complete specification available upon request. Chassis: * Welded construction made of high-quality steel profiles with punched cross-members. Designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling Device: * 2-inch kingpin (also suitable for 3.5-inch reception) Underride Guard: * In accordance with EC regulations, bolted design Side Impact Protection: * In accordance with EC regulations Landing Legs: * 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S foot Axles: * 3 x 9 t air suspension axle assembly, manufacturer: SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted 10-hole wheels, offset 120 mm, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary valve with locking function, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted on lifting/lowering device bracket Bljdpfjyz E T Ssx Al Heg * Smartboard/TIM/Infocenter, no TPMS display Lift Axle: * First axle liftable, fully automatic load-dependent lift control, starting aid via button in the cab (15-pin socket PIN12). Button in cab is not included in delivery Brake System: * Two-line compressed air brake system according to EC guidelines with EBS and RSS, automatic load-sensing, spring-loaded cylinders as parking brake, non-reversible coupling heads fixed to front cross-member, without connecting line to motor vehicle, Wabco brand Tyres: * 6-fold, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand of our choice), offset 120 mm * Basic version tyre pressure monitoring, connected to the EBS CAN bus system * Tyre pressure display in the cab (pre-installed by tractor manufacturer) Mudguards: * In accordance with EC, PVC mudguards (semi-shell) over all axles * Mud flaps with anti-spray Load Securing: * 8 pairs of welded hook plates in the outer frame (tensile strength approx. 3 t) * 6 pairs of lashing rings on the sides of the outer frame, evenly distributed (tensile strength approx. 10 t) Stake Sockets/Posts: * 5 pairs of stake sockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake sockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 removable posts made of galvanized square tubing, approx. 80 x 80 x 4 mm, stop at bottom Front Wall: * Bolted front wall, approx. 1,200 mm high, panelled with sheet metal Stake Magazine: * Magazine for removable posts inside front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting System: * EC-compliant, 24 volt with multi-chamber lights, LED side marker lights, LED front position lights white, LED rear outline marker lights, license plate lights * 1x15-pin and 2x7-pin sockets on the front cross-member Equipment: * Warning panel according to ECE 70 * 2 LED work lights on lamp bracket (switched via reverse gear) * Bracket for revolving beacon at rear (including beacon) * 1 rear access ladder, foldable and extendable (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of front wall * Smartboard with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the support legs (switched via revers

Stanje: rabljeno, Oprema: ABS, Interna številka: 26A012 Blodpfx Aoyut Dqol Hog

Stanje: rabljeno, konfiguracija osi: 3 osi, Oprema: ABS, Interna številka: 26A011 Blsdpfx Aoyuiurel Hog

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.000 kg, največja dovoljena obremenitev: 29.000 kg, skupna masa: 38.000 kg, prva registracija: 08/2020, barva: rdeča, Leto izdelave: 2020, ES-GE 2-Axle Lowbed Trailer, non-telescopic, Tridec Steering Gross Vehicle Weight: 38,000 kg Axle Load (2 x 10,000 kg): 20,000 kg Fifth Wheel Load: 18,000 kg Unladen Weight +/- Manufacturer Tolerance: approx. 9,000 kg Bedpfxsu U Np Tj Al Holg Payload: approx. 29,000 kg Total Length: approx. 13,650 mm Total Width: approx. 2,540 mm Loading Platform Length: approx. 13,200 mm Loading Platform Width: approx. 2,540 mm Front Overhang: approx. 1,200 mm Front Radius: approx. 1,750 mm Kingpin Swing Clearance: approx. 2,100 mm Fifth Wheel Height: approx. 1,150 mm B-Dimension: approx. 12,000 mm Raised Platform Length: approx. 3,700 mm Deck Height, Raised Platform: approx. 1,480 mm Lowbed Length: approx. 6,500 mm Deck Height, Lowbed: approx. 250 mm Ground Clearance, Lowbed: approx. 100 mm Deck Height over Axle Assembly: approx. 3,000 mm Tractor Unit Specification A-Dimension: approx. 4,500 mm Fifth Wheel Height: approx. 1,150 mm Kingpin Swing Clearance: approx. 2,100 mm Chassis: - Frame made from high-grade fine-grain steel - Lowbed in rigid design - Axle assembly not detachable - Without excavator boom recess King Pin - 2-inch kingpin Landing Gear - Without front landing legs Axles - 2 x 10,000 kg axles (17.5"), technically rated at 12,000 kg each - Manufacturer: Gigant - Enclosed drum brakes, asbestos-free brake linings - Automatic slack adjusters, central alignment - Axle spacing approx. 1,360 mm Suspension - Air suspension with raise and lower function - 2nd ride height for air suspension (+ approx. 30 mm) Steering - Hydraulic axle kingpin steering - All axles steered, brand "Tridec" Tyres - 9 x 245/70 R 17.5 tyres, load index 146/146 F - Manufacturer: Continental - Steel rims Brakes - Dual-circuit air brake system in accordance with EU directives, Manufacturer: "Knorr" - Automatic load-dependent braking force regulator - Standard air couplings red/yellow, per ISO 1726 - Electronic brake system, "EBS", 7-pin socket per ISO 7638, mounted on front in line with EU requirements. With ABS 4S/2M - With RSS (Roll Stability Support) - Parking brake via spring actuators - 4 wheel chocks with holders - Without flexible connection hoses (Wendeflex) to tractor unit - Air tanks made of aluminium - TIMG2 (Trailer Information Module) mounted for reading current axle loads Underrun Protection - Integrated into rear closure panel Side Frame - Side frame made from UNP steel approx. 200 mm Load Securing - 13 lashing points per side with 13,400 kg lashing capacity, foldable outward, mounted on outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing force at the rear of the gooseneck, approx. 400 mm above ground - 1 pair of lashing rings with approx. 13,400 kg lashing force at the rear vertical end of the lowbed - 7 stake pockets per side on inner side of the outer frame for stakes approximately 80x50x4 mm, evenly distributed along the full length of the load platform - 6 stake pockets per side, welded on the exterior of the longitudinal beams Flooring - Approx. 28 mm hardwood floor with Omega profiles, fitted between the longitudinal beams - Checker plate (approx. 8/10 mm) over axle assembly Front Wall - Designed as a storage box with lid, approx. D 400 x H 450 mm, over the entire width of the loading platform, with chamfered corners Side Walls - 3 removable anodised side walls on the gooseneck, approx. 2,440 x 400 mm - Removable galvanised stanchions at the rear Galvanizing - All steel parts shot-blasted - Chassis spray-galvanized Paintwork - Primer and sin

Stanje: novo, največja dovoljena obremenitev: 63.960 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment features. Full equipment details available upon request. Chassis: * Welded construction made from high-quality steel profiles with punched cross members, designed for high point load capacity * Outer frame: UNP steel Towing device: * 2-inch king pin Bedpfswx Dcaex Al Helg Underrun protection: * In accordance with EC regulations, bolted design Side impact protection: * In accordance with EC regulations Landing legs: * Landing legs with single-side operation, support load approx. 66 t/lifting capacity approx. 24 t Axles: * 5 x 10 t air suspension axle assemblies, SAF brand, with drum brakes approx. 400 x 200 mm * ABS * Centrally located 10-hole wheel connection with offset ET 0 * Total air suspension lift approx. 200 mm, raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with lock function Steering: * 1 axle self-steering at the front, 2nd axle fixed, 3rd, 4th, and 5th axle forced steered via linkage * Centralized lubrication points positioned externally Axle lift: * First and second axles can be raised automatically, with additional deactivation on the chassis Brake system: * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, Wabco 4S/3M brand * Spring chamber cylinders as parking brake, anti-mistake coupling heads permanently mounted to the front panel, without connection line to the tractor unit * Aluminium air reservoirs Tyres: * 10 x 445/65 R22.5 164J on 11.75 x 22.5 ET 0 rims – Manufacturer of our choice TPMS: * Tyre Pressure Monitoring System (TPMS) according to ECE R141, with data transmission to the tractor unit Mudguards: * In accordance with EC, 1st axle front, 2nd axle rear, 3rd, 4th, and 5th axle each front and rear with a 1/4 PVC mudguard * Rear mudguards with spray flaps Load securing: * 5 pairs of foldable lashing rings, evenly distributed (lashing capacity approx. 14 t) * 11 pairs of hook plates welded into the outer frame (lashing capacity approx. 3 t) * 10 pairs of side lashing rings welded into outer frame, evenly distributed (lashing capacity approx. 8 t) Stake pockets: * 10 pairs of stake pockets recessed into the outer frame * 6 pairs of stake pockets recessed into the floor (on the outer longitudinal frame) Insertable stakes: * 16 galvanized insertable stakes, approx. 80 x 80 x 8 mm, approx. 850 mm usable length Stake magazine: * One magazine for 8 insertable stakes (approx. 80/80 mm) on each side in front of the front wall Front wall: * Bolted corner posts, filled with aluminium hollow profiles, internally with a steel impact plate over full width and height Floor: * Approx. 28 mm Z-hardwood floor recessed into the outer frame, flush-mounted Lighting system: * According to EC, 24 Volt with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline lights rear * Number plate lights 1x15 and 2x7-pin connector at the front panel Equipment: * Two wheel chocks with holder * Warning panel as per ECE 70 * Work spotlight on light carrier (activated by reverse gear) * Holder for rotating beacon at the rear (including beacon) * Fixed access ladder on both left and right, including plug-in step * Smart Board * Sticker: "Vehicle swings out" and load center of gravity indication Paintwork: * Chassis and front wall blast-cleaned and high-quality top-coated * Chas

Stanje: novo, največja dovoljena obremenitev: 56.570 kg, skupna masa: 66.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Extract from the equipment features – full specifications available upon request. Chassis: - Chassis frame construction made of welded longitudinal beams and pass-through cross members - Rear under-run bar approx. 700 mm wide - Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams - Cross member spacing max. 400 mm (for longitudinally laid floor) Bjdpfxswx Dcte Al Hslg - King pin 3.5 inch according to SAE standard, replaceable - Outer frame as UNP 200, open to the outside Landing Gear: - 24 t telescopic landing gear JOST -MODUL CH (Heavy Duty) S-foot Axles: - 4 x 10 t SAF axles with large drum brake - 22.5 single tires - Axle distances approx. 1,700/1,810/1,810 mm - Air suspension unit, each with 10 t lifting capacity, lifting and lowering device with 1 rotary slide valve Knorr/Wabco - Holder for lifting and lowering device, bolted version Brake: - Smartboard/TIM/Infocenter at the lifting/lowering gear bracket, in addition to the lift/lower valve, without battery (operable only with towing vehicle) - Holder for light and brake at the front, mounted on the underrun bar, total height approx. 700 mm - Tire pressure monitoring basic version, connected to the EBS CAN bus system - With dual release valve for brake and spring actuator - Test nipple for brake cylinder pressure at right front brake cylinder - 1 red and 1 yellow coupling head each - Lifting/lowering device mounted in driving direction rear left - EBS braking system Wabco make, CAN bus EBS diagnostics (EBS plug), no diagnostic cable led outside! Tires: - 8 x 445/65 R 22.5 premium brand tires of our choice - Central centering Lubrication: - Grease nipple strips at the bogies and at the steering front. No central lubrication Superstructure: - Without body certificate according to DIN EN 12642 XL - 2x LED work lights on top of the front wall (facing rear), switch at the lift/lower bracket - Front wall for platform, reinforced version - Side contour marking yellow, rear yellow - Front wall approx. 800 mm high, with sheet metal cladding, bolted version Lighting: - 2x LED work lights, mounted in lamp panel, switched via reverse gear - 2x LED work lights, switched via reverse gear, 1 each side near landing gear - 2x LED reversing lights, 1 per side in front of the 1st axle - Lighting/wiring system brand of our choice - Number plate lighting - The towing vehicle must provide sufficient electrical capacity for the chosen lighting (esp. reversing light) - Position marker lights at the front, lower, white, 1 per side left and right (LED) - 24V lighting system with large multifunction rear lamp - Side marker lights (LED) flashing - 1x 15-pin and 2x 7-pin sockets in multifunction box at the front - EBS socket output - 1 pair lane keeping lights (LED) Floor: - Hardwood floor approx. 28 mm, alternating with galvanized omega steel profiles Paint/Coating (no metallic shades): - Chassis painted in RAL color of choice - Front wall (steel construction) in RAL color of choice - Axle hubs matching chassis color - Axles and landing gear black - Wheels in aluminum/silver similar to RAL 9006 - Wheel nuts untreated - Under-run protection painted RAL 9010 pure white (aluminum) Accessories: - Lifting device for 1st axle - 9 welded lashing plate hooks per side in the outer frame, lashing capacity max. 3,000 daN each - 12 RUD-SLP lashing points per side with

Stanje: novo, največja dovoljena obremenitev: 34.350 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Partial list of equipment. Full equipment list available on request. Bljdpfowt Iylox Al Hog Chassis: * Welded construction made from high-quality steel profiles with reinforced crossmembers, designed for high floor and point loads, with heavy-duty outer frame * Rear loading floor as steel welded construction, with two welded-in external drive tracks made from 5-hole steel sheet (Lohr/Rolfo hole pattern system), approximately 2,250 mm long, hydraulically lowerable by approx. 350 mm * Rear of the vehicle features an integrated loading platform, extendable by approx. 1,500 mm hydraulically; steel welded construction with 5-hole steel sheet cover (Lohr/Rolfo hole pattern system), integrated lights, two ramp storage compartments, and ramp supports * Rear end drive and control via electrical-hydraulic power pack, mounted in a stainless steel box on the left side of the chassis, with radio remote control * Power supply from the tractor unit’s vehicle battery (NATO socket on the front wall, without connecting cable to the truck) Coupling Device: * 2-inch king pin, replaceable from below Underride Protection: * Fixed installation as per EU regulations Landing Legs: * 2 x 12 t support legs with 2-speed gear Axles: * 3 x 9 t air-suspended axle units * SAF brand with disc brakes approx. 370 x 45 mm * ABS * 10-hole centrally located wheel bolt circle, ET120 * Total air suspension stroke approx. 310 mm, with lift approx. 220 mm and lowering approx. 90 mm * Air suspension control via hand lever with stop function Lifting Axle: * 1st and 3rd axles can be lifted automatically, also manually via control at the chassis frame or via PIN 12 of the light socket Tyres: * 6 units, 445/45R19.5, fitted on 14.00x19.5 rims, 10 holes, ET120 Mudguards: * As per EU standards, 1/4 PVC mudguards * 1st axle front and rear; 2nd and 3rd axles rear Brake System: * Wabco brand * Dual-circuit braking system in accordance with EU regulations, with EBS and automatic load-dependent control * Spring-actuated parking brake active on 2 axles * Reversed coupling heads solidly mounted on front crossmember, no connection line to truck Lighting Equipment: * As per EU standards, 24 Volt * Multi-chamber tail lights * Number plate lights * LED side marker lights * White LED position lights at the front and LED lane marker lights at the rear * 15-pin socket and 2x7-pin sockets firmly attached to the front crossmember, no connecting lines to truck Load Securing: * 9 pairs of foldable lashing rings evenly distributed, traction approx. 8 t * 8 pairs of foldable lashing rings evenly distributed, traction approx. 2.5 t * 2 pairs of foldable lashing rings at the rear, traction approx. 2.5 t * On the outer frame, holes for lashing straps every approx. 500 mm Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pocket Sockets: * 8 per side recessed into the outer frame * 4 rows of sockets transversely across the loading area Floor: * Approx. 28 mm Z-hardwood floor, recessed in outer frame Front Wall: * Solid front wall * Storage for 16 plug-in stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holders * 2x PVC toolbox, approx. 600/400/500 mm * Rear rotating beacon holder incl. beacon * 2 LED reversing lights (at rear) * 2 aluminum loading ramps, approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair

Stanje: novo, največja dovoljena obremenitev: 39.850 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment features. Full equipment specification available upon request. Chassis: * Welded construction made from high-quality steel profiles with punched crossmembers * Designed for high point loads. Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underrun nose approx. 700 mm wide * Mounting interface for customer-side installation of a support device at the front, approx. 90 x 90 x 4 mm Coupling device: * 2-inch king pin (also suitable for 3.5) Underrun protection: * According to EC regulations, bolted version Side impact protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) with S-foot Axles: * 3 x 9 t air suspension axle units, brand of our choice, with disc brakes approx. 430 x 45 mm * ABS * Wheel connection, center guided, 10-hole with offset 120 * Total lift of air suspension approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, control via rotary slide valve with detent feature, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted at the lifting/lowering unit bracket * Smartboard/TIM/Infocenter, no TPMS display Lift axle: * First axle liftable, with fully automatic, load-dependent lift control, start-up aid via button in driver’s cab (15-pin socket PIN12). Button in driver’s cab not included in delivery Brake system: * Manufacturer of our choice * Two-line compressed air braking system according to EC with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Mismating-proof coupling heads permanently mounted to the front crossmember, without connecting line to truck Tyres: * 6 pieces, 385/65 R22.5 160J on rim 11.75 x 22.5 (brand of our choice), offset 120 * Basic version tyre pressure monitoring, connected to EBS CAN-bus * Tyre pressure indicator in driver’s cab (pre-installed by chassis manufacturer) Mudguards: * According to EC, PVC mudguards (half-shell) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into outer frame (tensile strength approx. 3 t) * 6 pairs of lashing rings mounted on side of outer frame, evenly distributed (tensile strength approx. 10 t) * 13 pairs of lashing points (hoops) in outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/Posts: * 5 pairs of stake pockets recessed in outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with lower stop Front wall: * Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: * Magazine for plug-in stakes inside front wall Floor: * Approx. 28 mm hardwood floor recessed into outer frame, with galvanized omega steel profiles Lighting system: * According to EC, 24 volts with multi-chamber lights * LED side marker lights * White LED position lights at front * LED outline marker lights at rear * License plate lights * 1 × 15-pin and 2 × 7-pin sockets on front crossmember Bljdpfswx Dbpox Al Hjg Equipment: * Two wheel chocks with holders * Warning plate according to ECE 70 * 2 LED work lights on lamp carrier (switched via reverse gear) * Bracket for rotating beacon at rear (including rotating beacon) * 1 foldable an

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 254 kW (345,34 KM), obratovalna teža: 4.925 kg, lastna masa: 4.465 kg, velikost pnevmatike: 750-16 6PR, Leto izdelave: 2008, obratovalne ure: 1.735 h, številka stroja/vozila: 881675, Oprema: spojka prikolice, 21/215 Kompresor na tandemskem priklopniku: - Dobava 21,5 m³ - Nazivni delovni tlak 21 bar - Največji dovoljeni tlak 22,8 bar - Nastavitev varnostnega ventila 28,5 bar - 6 valjev - Hlajenje z vodo - Prostornina rezervoarja za gorivo 550 litrov - Raven hrupa 100 LWa Blodpfxsy D Suhs Al Hog Dimenzije z vlečno napravo: - Dolžina 4.850 mm - Širina 2.004 mm - Višina 2.290 mm Vse cene v evrih, brez DDV, prevoz 500 evrov dodatno Pridržujemo si pravico do sprememb, napak, tiskarskih napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 7.920 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 12/2021, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.100 mm, skupna širina: 2.550 mm, Oprema: ABS, Wiese tandem priklopnik s pomično ponjavo • Tip: TA 10 SP • Zadnja portalna vrata Blodoy Ei Riopfx Al Heg • Notranje mere: 7,10 x 2,48 x 3,10 m • Nastavljiva vlečna kljuka po višini • Hidravlično dvižna streha • Zadnja opora • Enojne pnevmatike, dimenzija: 235/75 R 17.5 • Bobnasta zavora Za dodatne informacije smo vam na voljo.

Stanje: rabljeno, največja dovoljena obremenitev: 6.330 kg, konfiguracija osi: 2 osi, prva registracija: 08/2016, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 7.160 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.480 mm, Oprema: ABS, SPIER Curtain-Sided Tandem Trailer with Through-Loading System • Front Portal Doors • Sideboards • MOT until 08/26 At a Glance · First registration: 05/08/2016 · Colour: white · Tyres: 1st axle: 235/75 R 17.5 2nd axle: 235/75 R 17.5 · Dimensions: approx. 7.16 x 2.48 x 2.48 m · Unladen weight: 3,670 kg · Payload: 6,330 kg · Gross vehicle weight: 10,000 kg · Note: Immediately available Equipment Tandem curtain-sided trailer, Gigant axles, 50cm sideboards, through-loading system with front portal doors, 2 tie-down rings (2,000 daN), drive-over ramp, rear support legs, spare wheel, length-adjustable drawbar, air suspension with raise/lower valve, 2 x wheel chocks, Duomatic coupling, JOST landing gear, ABS, EBS, 2-axle configuration, access ladder, ADR nameplate, 2 wheel chocks, MOT valid until 08/26. Errors, omissions, and prior sale excepted. The seller reserves the right to withdraw from the sale. _____ Internal reference for inquiries: TR26059 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Sales contacts: Mr. Ing. Christoph Wimmer (German, English, Czech, Polish, Italian) p: also WhatsApp t: @: Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / also WhatsApp t: -104 Bsdpfx Aexha R Asl Helg @: Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / also WhatsApp t: -123 @: We speak 13 languages. Yours too! Contact us! Homepage: Facebook: Instagram: Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks, and vans. Michael Doblhofer (German, English) p: also WhatsApp t: -102 @: Bastian Wagner (German, English) p: WhatsApp t: -103 @:

Stanje: rabljeno, moč: 103 kW (140,04 KM), število postelj: 2, vrsta goriva: dizel, vrsta prenosa: mehanski, barva: siv, prva registracija: 02/2026, skupna dolžina: 5.990 mm, skupna širina: 2.050 mm, skupna višina: 2.730 mm, konfiguracija osi: 2 osi, emisijski razred: Euro 6, skupna masa: 3.500 kg, Leto izdelave: 2024, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, garancija za rabljena vozila, klimatska naprava, kopalnica, * Engine / Chassis: Fiat Ducato 2.2 Multijet * Power: 103 kW / 140 hp * Transmission: Manual gearbox * Permissible gross weight: 3,500 kg * Bed(s): Double bed * Seating group: Side seating area * Upholstery: Alternative Graphite * Wood decor: Visby Oak ----SPECIAL EQUIPMENT: Bljdpjxtrwrjfx Al Hsg * pro Package (Basic Package, Style Package, Fiat Ducato 3,500 kg – 2.2 Multijet – 103 kW / 140 hp Euro 6 – 6-speed manual gearbox, bumper painted white, 16" alloy wheels, multifunction steering wheel, 90 l diesel tank, cab folding blackout, 3.75 m awning, pro decals) * Fiat Ducato 3,500 kg – 2.2 Multijet – 103 kW / 140 hp Euro VI E – 6-speed manual gearbox * Traction+ with Hill Descent Control * Spare wheel incl. mount and jack instead of Fix & Go Kit * Chassis color Campovolo * Chassis Safety Package (brake assist with pedestrian and cyclist detection, lane keeping assist, rain and light sensor, traffic sign and high beam recognition) * Waste water tank insulated and heated * Framed windows * Guest bed across living area * Wooden shower tray * TV pre-installation / TV bracket * Wiring preparation for solar system * Chassis Comfort Package (electrically folding mirrors, rear parking sensors, blind spot assist, fog lights, electric parking brake) ----Attractive financing available through CA Bank, also possible without down payment (subject to credit check). In addition to the sale and rental of motorhomes and caravans, we also offer a wide range of accessories, add-ons, repairs, spare parts, as well as a camping and leisure shop. You are also welcome to visit us in Celle, where you will find a large selection of motorhomes and caravans available for viewing. Our advisors in sales, rentals, and workshop are of course at your disposal. EXPORT SERVICE: Customers from outside Germany are welcome! We look forward to your visit! Your Bürstner Premium Partner directly on the B 214. ----Specifications, availability and errors subject to change! ----created with SYSCARA

Stanje: rabljeno, lastna masa: 14.100 kg, največja dovoljena obremenitev: 33.900 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/1999, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 50 odstotek, barva: zelen, Leto izdelave: 1999, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: ABS, registracija tovornjaka, Reference number for inquiries: 68575 Nooteboom, Euro standard * Year of manufacture: 1999 * ABS (Anti-lock Braking System) * Air suspension * Suspension type: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload capacity: 33,900 kg * Permissible gross weight: 48,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 50% -- 50%, tire size: 235/75 R17.5 * Tire condition, 2nd axle: 40% -- 40%, tire size: 235/75 R17.5 * Tire condition, 3rd axle: 50% -- 50%, tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Body manufacturer: ES-GE Bedpfjyibz Rox Al Holg * 3rd axle hydraulically forced-steered * Extendable up to 9,950 mm * Telescopic extension defective * Loading platform length: 10,990 mm Disclaimer: Specifications subject to change, prior sale, and errors excepted. More images and videos are available on our website. Our comprehensive service portfolio includes: * Purchase, sale, and rental of commercial vehicles * Fast and straightforward financing solutions * Processing of all (export) documents * Ordering of export and customs license plates * Vehicle preparation: new tarpaulins, signage, resprays, etc. * Professional loading and load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialist staff; we are happy to advise you.

Stanje: rabljeno, prevoženi kilometri: 116.914 km, moč: 66 kW (89,73 KM), prva registracija: 01/2022, vrsta goriva: dizel, konfiguracija osi: 4x2, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, število sedežev: 3, Oprema: klimatska naprava, servovolan, Te informacije ne predstavljajo pogodbenega elementa Bljdjyzg Auopfx Al Hjg

Stanje: rabljeno, prevoženi kilometri: 133.475 km, moč: 96 kW (130,52 KM), število postelj: 2, vrsta goriva: dizel, vrsta prenosa: samodejen, barva: bela, prva registracija: 08/2013, naslednji pregled (TÜV): 08/2026, skupna dolžina: 6.770 mm, skupna širina: 2.220 mm, skupna višina: 2.690 mm, emisijski razred: Euro 5, skupna masa: 3.500 kg, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, kopalnica, TEC ADVANTEC V644G | Automatic, Twin Beds & Solar | One Owner! Are you looking for a compact motorhome with a first-class layout? This one-owner TEC ADVANTEC V644G stands out with its high level of driving comfort, thanks to its automatic transmission, and the ever-popular twin beds in the rear. Equipped with a 100-watt solar system, awning, and reversing camera, this vehicle is ready for independent travel. Thanks to the fixed tow bar and spacious rear garage, you won’t have to leave behind any bulky holiday luggage. Condition Note: We are selling this vehicle with open and honest documentation. There is water damage present in the floor area of the rear garage. This offers hobbyists or knowledgeable buyers the opportunity to acquire a well-equipped vehicle at an attractive price. Feel free to visit and see for yourself — we look forward to welcoming you in Dülmen! ----Vehicle Details – Chassis * Brand: TEC * Model: ADVANTEC V644G * Body type: Semi-integrated * Chassis: FIAT Ducato * Engine: 2.3 l (2287 cc) * Power: 96 kW / 130 HP * Transmission: Automatic * First registration: 01.08.2013 * Mileage: approx. 133,462 km * Next inspection (TÜV): 08/2026 * Emissions standard: Euro 5 (Green emissions sticker) ----Features * Twin beds for maximum sleeping comfort * Automatic transmission for relaxed touring * 100-watt solar system for self-sufficiency Bedpfx Aljy Dwpko Hjlg * Awning & TV prep (1x TV included) * Reversing camera (RFK) with separate monitor * Fixed tow bar * Rear garage with access from both sides * Automatic satellite system * 4 registered seats ----Special Notes Water damage: In the floor area of the rear garage. ----Viewing and Consulting Please feel free to visit us in Dülmen-Hiddingsel. For in-depth consultation, we kindly ask that you make an appointment in advance. Location: Graskamp 15, 48249 Dülmen Trade-in and Financing We are happy to take your car or motorcycle in trade. Attractive financing options are available on request. Opening hours: * Monday – Friday: 09:00 – 18:00 * Saturday: 09:00 – 16:00 * Viewing Sunday: 11:00 – 16:00 (browsing only, no consulting/sales) ----Notes: Vehicle may be sold or relocated without prior notice. All information without guarantee. The listed price does not constitute a legally binding offer. Please inform us before signing a contract if specific features are particularly important to you.