Pavic Pavic Prsh27 Plateau Rungen Schnellwechselsystem nakup rabljenega (448)

Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design: Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8° 1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN) 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN) Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Brake system: Brake system as per EU regulations with EBS-E (2S2M) Paintwork: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer High-quality single-colour 2-component (2K) top coat in Nova grey Rear section metallized and painted in RAL 9010 (Pure White) No metallic paint possible Landing gear: JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction from high-tensile fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tyres: BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually Axle tool Tyres: 435/50 R 19.5 Accessories included: At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets 2" kingpin Galvanized steel front wall approx. 1,600 mm high, EN12642-XL White reflective tape to EU standards on the sides, extension section and red at the rear Loading platform with heavy-duty hardwood floor 9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform 1 spare wheel holder under the platform on the right (direction of travel) Galvanized folding supports under the rear slope of the loading area Sliding mounting rails for ALU loading ramps at the rear of the vehicle European reflective plates (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer Bracket for a rotating beacon at the rear of the semi-trailer At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket Djdpfx Apek Eammjwekp One HDPE toolbox 620x360x610 under the platform on the left (direction of travel) 4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container 3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition Speed stickers 80 km/h on the rear and both sides Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards Load gauge including axle load diagram HRM metallization (High Resistance Metallisation) of the outer frame Complete steel structure shot blasted, then specified visible surfaces metallized

Stanje: novo, lastna masa: 11.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.250 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, barva: sivo-črna, Oprema: ABS, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism A fixed intermediate table, approx. 250 mm wide, is mounted on the central beam 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Openings in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) Axles and tyres: BPW axles and suspension, all axles with hydro-mechanical forced steering Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tools 6 tyres, size 385/65 R 22.5 Brake system: Brake system according to EU regulations with EBS-E (2S2M) Landing gear: JOST landing legs (mechanically operated) with 2-speed gearbox for 24 t lift load (50 t test load) Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX mounted on the front terminal board with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class, long-lasting corrosion protection of the standard grit-blasted welded frame, guaranteed by a 2-component (2K) zinc-dust primer High-quality, single-colour 2-component (2K) top coat in Novagrau Rear section metallised and painted in RAL 9010 (pure white) No metallic paint finish possible Included accessories: At the gooseneck and at the rear plate, left and right, each with a bracket for warning signs, including socket Remote steering from the front and rear via cable remote control with push buttons, with single-track control of the axles Electro-hydraulic unit 4 wheel chocks with brackets on the front wall Dkedpohlz Shefx Apwep 2" kingpin A galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised front terminal board White reflective tape on the side, at the extension and rear in accordance with EU regulations, red at the rear European reflective plates (red-yellow) on the rear of the trailer One mud flap on the rear of the trailer Manual and documentation Bracket for a revolving warning light at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor set in omega profiles 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform on the right-hand side in the driving direction 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container 5 pairs of stake pocket strips, mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm A galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm) Access ladder mounted on the right in the direction of travel One HDPE toolbox 1,200x500x480 mounted at the front under the loading platform on the left in the direction of travel Lift axle on the front axle with control via TEBS E depending on the current axle load and loading status Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump Red/white reflective tape on the extension of the loading platform On the central beam,

Stanje: novo, lastna masa: 6.350 kg, največja dovoljena obremenitev: 38.650 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Loading Platform: - 2 pairs of folding external lashing rings (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, air suspended, with disc brakes (430 mm), lift/lower function - Tyres: 385/65 R 22.5 Braking System: - WABCO braking system compliant with EU regulations featuring EBS-E (2S2M) Paintwork: - Premium and durable corrosion protection of the standard grit-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat in single-tone MB 7350 Novagrau - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paintwork not possible Steel Construction: - Steel construction made from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: - Electrical system in accordance with EU regulations - Lighting: 24 volt - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets - Connection standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection bar - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall approx. 1,600 mm high, EN12642-XL - White reflector tape according to EU regulations, lateral and rear red - European reflective panels (red-yellow) at the rear of the trailer - Loading platform with approx. 30 mm thick hardwood flooring, framed in omega profiles - 10 pairs of stanchion sockets for 100 x 50 mm plug-in stakes in the outer frame - 3 pairs of transverse stanchion rack strips, fitted in the loading platform, for 100 x 50 mm plug-in stakes - Bracket for 1,000 mm plug-in stakes, rear in the central beam - 1 spare wheel carrier under the loading platform on the right hand side - 1 mudflap at the rear of the trailer - Manual and description on USB stick - Bracket for beacon at the rear of the trailer - Holders for warning signs including socket at the gooseneck and left/right rear panel - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and both sides Dsdpfx Apsiu Etkswjkp - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light - Load gauge for axle load determination including load diagram - HRM (High Resistance Metallisation) of the outer frame - Complete steel structure is grit blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot coating

Stanje: novo, lastna masa: 8.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.080 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism Cutouts in the outer frame of the loading platform for attaching lashing straps Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity Axles and tires: BPW axles, air-suspended, with disc brakes (430 mm), with lift/lower function Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually Axle tools Tires 385/65 R 22.5 Braking system: WABCO braking system in accordance with EU regulations with EBS-E Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer A high-quality single-color 2-component topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 No metallic paint available Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N / S355MC S690QL / S700MC Electrical system: Electrical system in accordance with EU regulations Lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection bar with 24N, 24S and 15-pin sockets Connection according to ISO Accessories included: Front galvanized connection bar with yellow-red air couplings One galvanized steel front wall approx. 1,600 mm high, EN12642-XL 4 wheel chocks with holders White reflector tape according to EU regulations on the sides, on the extension, and in red at the rear European reflective plates at the rear of the trailer Loading platform with approx. 30 mm thick hardwood floor enclosed in omega profiles 10 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in the direction of travel Dodpfx Apoikyh Howskp Manual and description One holder for a rotating beacon at the rear of the trailer On the gooseneck and each side of the rear plate (left and right), a bracket for warning panels incl. socket Anti-slip sand layer painted onto the central beam 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; the extension includes an additional locking point for one 45ft container 4 pairs of transverse stake pocket rails mounted in the loading platform for plug-in stakes 100 x 50 mm One galvanized holder transversely under the loading platform, 2,390 x 720 x 400 mm Access ladder mounted right-hand side in direction of travel Front axle lift axle with control via TEBS E depending on current axle load and load status Load manometer for determining axle loads, including load chart HRM metallization of the outer frame: complete steel structure shot-blasted, then the defined visible surfaces metallized hot-finished with ZINACOR 850

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels Dedpfxjiuy Nle Apwjkp - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Djdpfsi Dwlwox Apwjkp Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: rabljeno, prva registracija: 09/1994, Leto izdelave: 1994, DOLL BOFA Belzig priklopnik za les z EXTE - kolci ! stabilen glavni okvir ! • 3 x BPW 8 t - ECO - Plus osi Dkjdewmpmgspfx Apwjp • zračno vzmetenje • dvižna os • ABS • LED delovne luči zadaj • Skupna dolžina: 12.500 mm • Širina: 2.500 mm • Skupna masa: 34.000 kg • Lastna teža: 6.400 kg • 8 x izvlečnih EXTE kolcev • Jeklo / aluminij • Pnevmatike: 385/65 R 22.5 - TÜV / tehnični pregled / SP: novo! - Nemški priklopnik! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: novo, največja dovoljena obremenitev: 23.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete inventory of vehicles available immediately or at short notice on our website. Excerpt of equipment. Full equipment details available upon request. Weights: Dkodpfx Aey Aug Rjpwsp * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform including sloped frame, corners beveled * Approx. 5,350 mm = low-bed platform – flat loading area * Approx. 850 mm = rear ramp slope * Overall width: approx. 2,550 mm (or approx. 3,000 mm with extensions) * Loaded loading height: approx. 870 mm * When assembling tractor-trailer combinations, compliance with the legally permissible overall height and train length must be observed! Chassis/Frame: * Steel welded construction with front frame cranking and rear bevel * Ramp slope with excavator bucket recess in the center = rear depression between longitudinal beams, approx. 2,300 mm long * Integrated into the outer frame: 5 pairs of approx. 4 t lashing lugs (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out lashing rings, approx. 10 t (4x low-bed, 1x on ramp slope, 2x on raised platform) * Standard ball bearing slewing ring Frame attachments: * Both sides of the low-bed platform equipped with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery being transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, arrangement: 1 pair at the front of the raised platform inside longitudinal beams, 1 pair right and left in the excavator bucket recess at the far rear, 1 pair at the front of the raised platform before the frame cranking, inside beams, 1 pair at the rear of the low-bed before the ramp slope in the bucket recess, left + right Towing device: * Fixed tow bar with swivel coupling eye approx. 40 + 50 mm, cranked design, silent bushing mounting, tow bar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Tow bar length approx. 1,800 mm Support equipment: * 2 automatic folding support legs at the rear Axles: * SAF air-suspension low-loader axles with drum brakes, load capacity 11 t/axle, S-cam brakes approx. 300/200 mm, automatic brake adjusters Wheels: * 12 tires, size 235/75 R 17.5, 141J, brand as per factory selection Brake system/Suspension: * Brake system according to ECE regulation R13 * Two-line air brake system * Manufacturer Wabco, EBS system 4S3M, 1st and 2nd axle equipped with sensors * RSS/RSP Stability Program * Spring-loaded parking brake on 2nd and 3rd axles * Brake/air connection lines with 2 separate couplings (yellow/red) * EBS/ABS connection cable * Air suspension with lift/lowering function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle bump stop on the front axle Assistance/Safety systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS CAN bus signal for display in the driver’s cab (truck must be prepared accordingly, not a calibrated scale) * Tire pressure monitoring per ECE regulation 141, with pressure sensors in the wheels, for display in the cab (display, etc. must be present in the tractor unit) Floor: * Approx. 50 mm softwood flooring, impregnated, protruding approx. 5–10 mm above the top edge of the frame * Steel chequer plate covers over the wheels Ramps: * 2 foldable, one-piece lightweight steel loading ramps, approx. 2,800 mm long, approx. 750 mm wide, with 35 mm

Stanje: novo, največja dovoljena obremenitev: 30.860 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpts from the equipment specifications. Full equipment details available upon request. Chassis: * Steel welded construction with front frame cranking, chamfered front corners, and rear chamfer, drive-up slope with centrally located excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed, retractable approx. 10 t lashing rings (2x on the raised platform, 1x at the front cranked slope, 3x in the low bed between the wheel recesses, 1x on the drive-up slope) 2 Pairs of Wheel Recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the cranking, including one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN each * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between 3rd and 4th axle, including one-piece drive-over aluminium cover, suitable for transporting wheel loaders with wheelbase approx. 2,700 - 3,600 mm, wheel diameter approx. 1,485 – 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer beam spacing) Frame Attachments: * 5 pairs of stake pockets in the outer frame for rectangular tube stakes approx. 100 x 50 x 5 mm (3x in the low-bed, 2x on the raised platform) * Low-bed platform with extendable width extensions on both sides with softwood planks approx. 50 mm (the track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distributed as follows: 1 pair at the front on the raised platform inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front on the raised platform before the cranking inside the longitudinal beams, 1 pair at the rear of the low-bed before the drive-up slope in the excavator bucket recess left and right Towing Device: Dkodoy Auhnopfx Apwsp * Fixed towing drawbar with approx. 50 mm heavy-duty towing eye, cranked design, silent bushing mounting, drawbar holding spring with tensioner * Truck coupling height from approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support Device: * 2 hydraulic rear supports, operated individually, controls housed in a separate stainless-steel box Axles: * SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, brand Conti HTR2 (tyre load capacity approx. 12 t/axle) Brake System/Suspension: * Brake system per ECE regulation R13, two-line pneumatic system * Brake system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed * RSS/RSP – stability control programme * Spring-loaded parking brake on the 3rd and 4th axles * Aluminium air tanks for total weight 44 t * Brake/air connection lines with two separate coupling heads, yellow/red * EBS/ABS connection cable * Tension rubber as holder for EBS and electrical connectors * Air suspension with lift and lowering device, operated separately at front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/safety systems: * SWIT – Schwarzmüller Intelligent Telematics Floor: * Softwood floor, approx. 50 mm, impreg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2003, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, skupna dolžina: 13.900 mm, skupna širina: 2.540 mm, skupna višina: 2.600 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, barva: drugo, Leto izdelave: 2003, Oprema: ABS, = Additional Options and Accessories = - EBS (Electronic Braking System) - Alloy wheels = Notes = Number of axles: 3 Unladen weight: 7,110 kg Gross weight: 39,000 kg Chassis type: Full chassis Chassis material: Steel Kingpin size: 2 inch Alloy wheels Suspension type: Full air suspension ABS EBS Body year of manufacture: 2003 Axle type: BPW = Further Information = General Information Cab: Day cab Registration: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 6 mm; Tyre tread right: 3 mm Dkodpfeyu Hz Njx Apwep Axle 2: Tyre tread left: 5 mm; Tyre tread right: 5 mm Axle 3: Steering; Tyre tread left: 8 mm; Tyre tread right: 6 mm Weights Empty weight: 7,110 kg Payload: 31,890 kg GVW: 39,000 kg Environment Emission class: Euro 0 Condition General condition: Average Technical condition: Average Optical condition: Average Damage: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-moving inventory • Recognizable quality • Competitive prices • Correct business practices • Multilingual staff • We understand our customers • Support for import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of "recognizable quality" • And more… Visit our website for special offers and a complete stock list: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 05/2005, dolžina tovornega prostora: 12.150 mm, širina tovornega prostora: 2.500 mm, skupna dolžina: 12.400 mm, skupna širina: 2.500 mm, skupna višina: 2.600 mm, vzmetenje: zrak, velikost pnevmatike: 425/65R22,5, barva: drugo, Leto izdelave: 2005, Oprema: ABS, = Additional Options and Equipment = - EBS = Notes = Number of axles: 2, Unladen weight: 7,200 kg, Gross weight: 38,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body year: 2005, Axle type: BPW = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 425/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 6 mm; Tyre tread right: 4 mm Axle 2: Steered; Tyre tread left: 12 mm; Tyre tread right: 12 mm Weights Curb weight: 7,200 kg Payload: 30,800 kg Gross vehicle weight: 38,000 kg Functional Loading height: 158 cm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simply! • Large, rapidly changing inventory • Recognizable quality • Good prices • Proper business practice • We speak many languages • We understand our customers • Support for import and transport • (Export) registration plates quickly arranged • Expert technical services • The security of recognizable quality • And more.... Please visit our website for special offers and our full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and submit a request via our website. Dodpfx Asyupanopwokp Directly inquire about our European warranty package.

Stanje: rabljeno, številka stroja/vozila: SKBD20S20HKE20608, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2018, = Dodatne možnosti in oprema = - Zadnje zračno vzmetenje - Sprednje zračno vzmetenje - Bobnasti zavorni sistem = Dodatne informacije = Teže Lastna teža: 4.570 kg Nosilnost: 15.430 kg Skupna dovoljena teža: 20.000 kg Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Optično stanje: povprečno Dodatne informacije Stanje sprednjih pnevmatik: 50 Sprednje pnevmatike: 235/75 22.5 Zadnje pnevmatike: 235/75 22.5 Zadnji pregled: 2025-10-20 Dodatne informacije Za več informacij kontaktirajte Lastas prodajo. Dkedpfx Aeykh Rkopwjp

Stanje: novo, lastna masa: 6.400 kg, največja dovoljena obremenitev: 38.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 13.550 mm, vzmetenje: zrak, nosilnost: 31.600 kg, MASIVEN KAPUR POD 34 PRITRDILNI OBROČI Dsdsx Hkvpepfx Apwekp LED LUČI DVOKRILNA VRATA 1. OS DVIGLJIVA ALUMINIJASTE STRANICE 800 mm NOSILEC REZERVNEGA KOLESA 2 PVC SKRINJI SAF OSI DISK ZAVORE DOLŽINA 13,55 m

Stanje: novo, največja dovoljena obremenitev: 29.270 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.690 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2025, Oprema: ABS, WS Trucks GmbH: Your Reliable Partner for Commercial Vehicles Expertise and Service from a Single Source WS Trucks GmbH is your reliable partner for buying and selling commercial vehicles. With over 25 years of experience, we offer an extensive range of used and new trucks, livestock carriers, refrigerated vehicles, trailers, and semi-trailers. --- Krone Curtainsider Trailer | Profiliner SDP 27 Technical Specifications: * Model: Krone Profiliner SDP 27 * Roof: Edscha sliding roof, can be opened from the front and rear * Certificates: EN 12642 XL, VDI 2700, beverage certificate, and load securing Code XL * Pallet box: 30-place pallet box for additional loading capacity * Axles: Krone axles with disc brakes, including lift axle * Equipment: Aluminium side slats, pallet support rail, 2 stow boxes (black), spare wheel holder, 2 x toolboxes ---Special features included: * Combination lashing rails: 8 lashing rails for optimal load securing * Load bars: 1 load bar for lashing rail (capacity: 1,100 kg) * Pallet stops: Left and right pallet stops * Lift axle: For added comfort and efficiency during transport Stake pockets plus 8 stakes: €1,350 net extra --- Contact us today for more information or to arrange a viewing! Errors and subject to prior sale--- Our Services for You: * Individual Consultation: We take the time to understand your needs and find the right vehicle for you. * Financing: We offer attractive financing and leasing terms. * Trade-in: We provide a fair valuation of your used vehicle and accept it as a trade-in. Djdpfx Apex Sb Hpowokp * Registration & Deregistration: We handle the registration of your new vehicle and the deregistration of your old vehicle. * Complete Export Processing: We take care of all customs processing. * Maintenance & Repairs: Our specialist workshop is at your disposal for maintenance and repair. Your Advantages: * Expertise: We are commercial vehicle specialists with in-depth market knowledge. * Reliability: We keep our promises and provide trustworthy advice and support. * Service: Comprehensive, one-stop service. * Quality: Only high-quality vehicles from renowned manufacturers. Our Core Competence: Livestock and Meat Transport Vehicles: * Comprehensive know-how: We understand the specific requirements of livestock and meat transport and can advise you on choosing the right vehicle. * Wide Selection: Large assortment of vehicles from various manufacturers and price ranges. * Quality: Only high-quality vehicles from reputable manufacturers. * Complete Service: All-round services from consulting and financing to maintenance and repair. --- Krone Trailer Partner WS Trucks GmbH is a Krone Trailer Partner. As a Krone Trailer Partner, we offer a wide range of new and used Krone trailers. Menke-Janzen Partner WS Trucks GmbH is also a partner of Menke-Janzen Fahrzeugbau. As a Menke-Janzen Partner, we offer a large selection of new and used livestock carriers. We assist with planning and realizing your new livestock carrier from 3.5t to 40t. --- For more information: Website:

Stanje: novo, največja dovoljena obremenitev: 29.270 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.690 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2025, Oprema: ABS, WS Trucks GmbH – Your Reliable Partner for Commercial Vehicles Expertise and Service from a Single Source WS Trucks GmbH is your reliable partner for the purchase and sale of commercial vehicles. With over 25 years of experience, we offer you a wide range of used and new trucks, livestock transporters, refrigerated vehicles, trailers, and semi-trailers. Krone Curtainsider Trailer | Profiliner SDP 27 Technical Specifications: * Model: Krone Profiliner SDP 27 * Roof: Edscha sliding roof, can be opened from the front and rear * Certifications: EN 12642 XL, VDI 2700 – beverage certificate and cargo securing Code XL * Pallet Box: 30-position pallet box for additional loading capacity * Axles: Krone axles with disc brakes, incl. lift axle * Equipment: Aluminum slats, pallet stop rail, 2 storage boxes (black), spare wheel holder, 2 x toolboxes * Stanchions Special equipment included: * Combination lashing rails: 8 lashing rails for optimal load securing * Locking bar: 1 locking bar for lashing rail (load capacity: 1,100 kg) * Pallet stops: Left and right-side pallet stops * Lift axle: For added convenience and efficiency in transport Stanchion pocket plus 8 stanchions surcharge net €1,350 Contact us today for more information or to arrange a viewing! Errors and prior sale excepted Our Services for You: * Individual consultation: We take time to understand your needs and find the right vehicle for you. * Financing: We arrange attractive financing offers and leasing terms. * Trade-in: We provide fair valuation of your used vehicle and accept it as trade-in. * Registration & Deregistration: We handle the complete registration of your new vehicle and deregistration of your old vehicle. * Complete export processing: We handle all customs formalities. * Maintenance & Repairs: Our specialist workshop manages the maintenance and repair of your vehicle. Your Benefits: * Expertise: We are experts in commercial vehicles and are familiar with the market. * Reliability: We keep our promises and support you with advice and assistance. * Service: We offer comprehensive one-stop service. * Quality: We provide only high-quality vehicles from renowned manufacturers. Our Key Competence: Livestock and Meat Transport Vehicles * Comprehensive expertise: We understand the specific requirements of livestock and meat transport and are happy to advise you on selecting the right vehicle. * Wide selection: We offer a large variety of vehicles from different manufacturers and price ranges. * Quality: We provide only high-quality vehicles from renowned manufacturers. * Comprehensive service: We offer an all-in-one service, from consultation and financing to maintenance and repair. Krone Trailer Partner WS Trucks GmbH is a Krone Trailer Partner. As a Krone Trailer Partner, we offer you a wide selection of new and used Krone semi-trailers. Menke-Janzen Partner Djdpfx Aexqk Iqopwskp WS Trucks GmbH is also a partner of Menke-Janzen Fahrzeugbau. As a Menke-Janzen partner, we offer a wide selection of new and used livestock transporters. We support you in planning and realizing your new livestock transporter from 3.5 t to 40 t. Further information: Website: ww

Stanje: novo, including ramp recess with ramps / enclosed loading area with numerous lashing points / hand winch Technical specifications: • Brand: Martz • Model: GT PLATEAU 400 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: without first registration • TÜV/general inspection: 2 years from initial registration • Internal dimensions (LxWxH): 405 x 199 x 0 cm • External dimensions (LxWxH): 555 x 203 x 89 cm • Permissible total weight: 2,700 kg • Unladen weight: 565 kg • Payload: 2,135 kg • Chassis: Platform trailer (wheels underneath body) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Phenolic plywood floor, anti-slip and waterproof • Including hand winch with brake • Recess for loading ramps under the platform • 2x steel ramps for loading • Very robust welded steel frame • Chassis hot-dip galvanized in immersion bath • 8x lashing rings mounted on side frame profile (600 daN/kg) • Side panels can be retrofitted at any time • Reverse automatics • KNOTT overrun brake and parking brake • Very robust bolted reinforced V-drawbar • 13-pin connector • Reversing light • Large dimension safety lighting • Integrated rear fog light • Rear frame lighting flush-mounted • Automatic jockey wheel installed Retrofittable accessories – feel free to inquire: • 100 km/h approval with shock absorbers • Wheel chocks • Side panels • Anti-theft device • Spare wheel • Storage box • Reversing light • Lashing straps • and much more New vehicle with warranty and TÜV (inspection). - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be sent in advance or temporary license plates (Germany) can be provided - Export plates including customs declaration possible Descriptions and images are protected by copyright! Trailer Centre BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available from stock immediately! We have been authorised dealers and service workshop for Brian James, Blyss, Debon, Humbaur, Hapert, Unsinn, Cheval Liberté, Ifor Williams, Koch, Lorries, Martz, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix and many other brands for over 30 years Dkodpfxsx S Rm Ee Apwep - Subject to errors, omissions and prior sale -

Stanje: novo, including aluminium floor / ramp compartment with ramps / many lashing points / manual winch Technical Data: • Make: Martz • Model: GT PLATEAU 500 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Without first registration • TÜV (Roadworthiness) / Inspection: 2 years from initial registration • Internal dimensions (LxWxH): 507 x 211 x 0 cm • External dimensions (LxWxH): 657 x 215 x 97 cm • Permissible total weight: 3,500 kg • Unladen weight: 764 kg • Payload: 2,736 kg • Chassis: Flatbed trailer (wheels underneath the platform) • Tyres: 195/55R10C • Running gear: KNOTT rubber suspension axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminium profile floor • Incl. manual winch with brake • Underfloor ramp storage compartment • 2x steel loading ramps • Aluminium drop sides can be retrofitted at any time • Corner sockets on all 4 corners for installing tarpaulin frames, mesh sides, sidewalls, or headboard extension • Very robust welded steel frame • Fully hot-dip galvanised frame by immersion bath • Very low chassis for minimal approach angle • Multiple continuous cross-members for high point loads • 10x recessed lashing eyes in frame profile (600 daN/kg) certified • Automatic reversing system • KNOTT overrun brake and parking brake • Reinforced heavy-duty V-drawbar • 13-pin plug • Reversing light • Large-dimension safety lighting • Integrated rear fog light • Rear frame integrated lighting • LED side marker lights at the rear • Automatic jockey wheel Optional accessories – please enquire: • 100 km/h approval with shock absorbers • Wheel chocks • Drop sides • Anti-theft lock • Spare wheel • Storage box • Reversing light • Lashing straps • And much more New vehicle with warranty and TÜV (inspection). - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary number plates (Germany) can be provided - Export registration including customs declaration available Descriptions and images are copyright protected! Trailer Centre BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available immediately! We have been specialist dealers and repair workshop for over 30 years for brands such as Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix Dkodpfx Apex Tbitswep - Subject to errors, omissions and prior sale -

Stanje: novo, including ramp shaft with ramps / closed loading platform with numerous lashing points / hand winch Technical specifications: • Brand: Martz • Model: GT PLATEAU 450/2 S 2.7T • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 449 x 211 x 0 cm • External dimensions (LxWxH): 600 x 215 x 89 cm • Permissible total weight: 2,700 kg • Unladen weight: 625 kg • Payload: 2,075 kg • Chassis: High-loader (wheels under the platform) • Tyres: 195/55R10C • Suspension: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted Dksdpfxsx S Rm So Apwep DESCRIPTION • Phenolic plywood floor, anti-slip and waterproof • Including hand winch with brake • Ramp storage compartment under the loading platform • 2 x steel loading ramps included • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • 10x lashing eyes integrated in the side frame profile (600daN/kg) • Sideboards can be retrofitted at any time • Reverse automatic brake • KNOTT overrun device and parking brake • Very solid bolted V-drawbar, reinforced • 13-pin plug • Reversing light • Large format safety lighting • Integrated rear fog lamp • Rear frame lighting recessed • Rear left and right LED marker lights • Automatic jockey wheel fitted Optional accessories – please enquire: • 100 km/h approval with shock absorbers • Wheel chocks • Sideboards • Anti-theft device • Spare wheel • Storage box • Reversing light • Lashing straps • and more New vehicle with warranty and TÜV. - Financing or leasing possible - Nationwide delivery available - All prices include VAT - Vehicle registration document can be sent in advance or provisional license plates (Germany) can be provided - Export license plates including customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you from stock! We have been specialist dealers & service workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands for over 30 years. - Subject to errors, omissions, and prior sale -

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 184.731 km, moč: 324 kW (440,52 KM), prva registracija: 01/2021, vrsta goriva: dizel, medosna razdalja: 5.600 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 500 l, barva: črn, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.600 mm, višina nakladalnega prostora: 1.200 mm, Leto izdelave: 2021, Oprema: AdBlue, = Further options and accessories = - PTO (Power Take-Off) Dkodpfxoyk Du Eo Apwep = Further information = Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 13,230 kg Payload: 12,770 kg Gross vehicle weight (GVW): 26,000 kg Body manufacturer: CVIM FRANCE LOW-LOADER/MACHINE TRANSPORTER/PLATFORM Loading platform height: 120 cm Technical condition: very good Optical condition: very good RENAULT C 440 DTI 6X2 LOW-LOADER / MACHINE TRANSPORTER / PLATFORM EURO 6 | L PACKAGE | 440 HP DRIVE: 6X2 | LIFTING AND STEERABLE REAR AXLE Wheelbase: 560 cm Air suspension Differential lock Day cab | Full options: air conditioning, navigation Automatic transmission Small trailer hitch Loading platform with hydraulically operated rear end with hydraulically extendable ramps Length: 960 cm Floor height: approx. 120 cm Lashing eyes Large, hydraulically adjustable ramps Large winch with radio control 2x rear supports Toolboxes Complete body operable with remote control Follow us on Instagram, Facebook, and TikTok to see videos of our trucks, commercial vehicles, and machines offered for sale. We speak German We speak English Hablamos Espanol

Stanje: dober (rabljeno), Leto izdelave: 2007, - Hiab 14-tonski nakladalni žerjav (tip 144E-3 Hipro) - 3 hidravlični izvleki - 5. in 6. funkcija - Vrtilna naprava - Upravljanje žerjava z visokim podstavkom - Shema nosilnosti: * 6,5 m -> 1960 kg * 8,3 m -> 1480 kg * 10,5 m -> 1160 kg - Dimenzije platforme: dolžina 485 cm x širina 249 cm - Višina kljuke 145 cm - 2 hidravlični spojki Dkjdpfx Asy Ny Dzepwep = Dodatne informacije = Dimenzije (D x Š x V): 590 x 255 x 330 cm Tehnično stanje: dobro Vizualno stanje: dobro Proizvajalec: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Stanje: rabljeno, lastna masa: 5.750 kg, največja dovoljena obremenitev: 32.250 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2020, naslednji pregled (TÜV): 04/2027, dolžina tovornega prostora: 13.000 mm, skupna dolžina: 2.550 mm, skupna višina: 13.150 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Schwarzmüller prikolica za prevoz lesa 3-osna za dolgi les | BPW osi z bobnastimi zavorami | lastna teža: 6180 kg | nosilnost: 31820 kg | dvižna os | pnevmatike: 385/65 R22,5 | orodjarna levo in desno | rezervno kolo | 10 parov kolov | zelo dobro stanje | Pravica do sprememb, tipkarskih napak in predhodne prodaje pridržana. Dkjdpfxozhctye Apwsp

Stanje: novo, lastna masa: 2.900 kg, največja dovoljena obremenitev: 7.600 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Višina natovarjanja približno 890 mm, notranja širina vozila približno 2.480 mm, prednja stena pocinkano jeklo, 600 mm zložljive in snemljive aluminijaste stranske deske, snemljive stranice, 40 mm lesen pod, na sredini 3-krat žepki za kljukaste stebre 80 x 80, 6 x privijačne zanke za pritrditev tovora, zunanji okvir z okroglimi zankami za pritrditev, ojačana podpora menjalnika z nosilnostjo in hitrim hodom, označevanje obrisa in stranska zaščita proti naletu, blatniki in zaščita proti pršenju zadaj, doplačilo za mrežno prednjo steno višine 1.600 mm (perforirana pločevina), cena: 1.400 EUR, doplačilo za aluminijaste rampe nosilnosti do 8 t na par in 2 x zložljive podpore zadaj, cena: 1.800 EUR. -- Tiskarske napake, pridržki in spremembe možni, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Dkjdpfozhr N Rjx Apwsp

Stanje: rabljeno, lastna masa: 6.000 kg, največja dovoljena obremenitev: 32.270 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2012, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Schwarzmüller timber semi-trailer 3-axle | BPW axles with disc brakes | Unladen weight 6000 kg | Lift axle | Tyres: 385/65 R22.5 Subject to errors, input mistakes, and prior sale. Djdpfswdwp Dox Apwskp

Stanje: rabljeno, lastna masa: 5.520 kg, največja dovoljena obremenitev: 32.480 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2017, naslednji pregled (TÜV): 08/2025, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, | Schwarzmüller 3-osna prikolica za les | SAF osi z disk zavorami | Lastna teža: 5520 kg | Nosilnost: 32480 kg | Dvigljiva os | Pnevmatike: 385/65 R22,5 | 10 parov stebrov | Pridržujemo si pravico do napak, vnosnih napak in predhodne prodaje. Dedpex S N Ubefx Apwskp

Stanje: rabljeno, lastna masa: 5.730 kg, največja dovoljena obremenitev: 32.270 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2014, naslednji pregled (TÜV): 05/2025, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Schwarzmüller timber trailer, 3-axle | BPW axles with disc brakes | Unladen weight: 5,730 kg | Payload: 32,270 kg | Lifting axle | Technical inspection valid until 05/25 | Tyres: 385/65 R22.5. Subject to error, input mistakes, and prior sale. Dksdpfxjwc Apys Apwsp