Müller Mitteltal Ka-Ta-R 14,4 14,4 T Tandemkipper- Tieflader, Breitbereift nakup rabljenega (64.851)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Egestorf
860 km
Odvozna prikolica
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0
----Brakes:
* Wabco EBS-E braking system
* Emergency release system for spring-loaded cylinders
* Drum brakes
* Duomatic brake connection
----Axles:
* 2 x ton SAF axles
* 1st axle as lift axle (fully automatic)
* Lift axle with ride height +30 mm via positioning cylinder
* Starting aid for shunting and mandatory lowering on the first axle – controlled via speed-dependent EBS electronics (no installation required on the truck; also with cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via radio remote control
----Drawbar / Flange Drawbar Eye:
* 50 mm flange-mounted drawbar eye, height-adjustable by +77 mm and -33 mm, for 2 t support load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12 / 24V
* 2 LED reversing lights, switched via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* Extended connecting cables for agricultural and forestry vehicles
* Power supply for radio remote: 12+24 V via taillight
----General Attachments:
* BPW landing leg at the front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-finish aluminium wheels
* Split-pin towing coupling (use only with retracted underrun protection)
* Enclosed plastic half-shell single mudguards
* Two-step access before the front bulkhead on the left side
* Shovel and broom holders in front of the front bulkhead
* 2 matte stainless steel toolboxes, approx. 650 x 350 x 320 mm, mounted right side
* Enclosed side protection usable as advertising space
----Hydraulics:
* 2-circuit hydraulic connections (engine end from truck/tractor), rated for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted front right), operated via radio remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hook system (Serial no. 100746129, year 2023)
* Base frame made of high-strength fine-grained steel
* 20,000 kg pulling force
* Hook height 1,570 mm
* Control of hooklift via radio remote control
* Remote control with rapid function when lowering, not when raising
* Emergency stop switches left and right sides
* Container supports with 4 lateral supports per side and one roller at the rear
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist in lifting the main arm
* 2 x mechanical fall supports at the rear
* Approval for 20 t gross vehicle weight (2 x 9 t axles) and 2 t support load
* Note: If the radio remote is outside the charging cradle, the service brake must be applied for radio release. Brake connections must remain connected at all times so the hydraulically/pneumatically operated valves can be opened.
* Monitoring system for underrun protection to ensure it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, access steps, underrun protection, and fall supports hot-dip galvanized
* Axles, air tanks, front landing gear painted black
* Palfinger hooklift painted black/yellow
----Information:
Giodpsx Dp Atofx Apbjt
* Errors and prior sale reserved
* Vehicle is in very good / as-new condition
----Delivery time:
* Vehicle is immediately available
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranhänger
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E braking system
* Emergency release device for spring brake cylinders
* Drum brakes
* Duomatic brake connection
----Axle:
* 2 x ton SAF axles
* 1st axle as lift axle (fully automatic)
* Lift axle with driving height +30 mm via positioning cylinder
* Traction aid for shunting purposes and forced lowering onto the first axle – controlled via speed-dependent EBS electronics (no installation required on truck side, additionally supplied with cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via radio remote control
----Drawbar / Flange Eye:
* 50 mm flange screw drawbar eye – height adjustable by +77 mm and -33 mm – for 2 ton support load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12 / 24V
* 2 LED reversing lamps activated by reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems
* Extended connection cables for agricultural and forestry vehicles
* Power supply for radio control 12+24V via tail light
----General Attachments:
* BPW landing gear at the front
* Mechanical, extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-cut aluminium wheels
* Pin-type towing coupling (use only when underrun protection is retracted)
* Closed plastic half-shell individual mudguards
Gijdpfx Apsx Dp Agsbet
* Two-step access in front of the front bulkhead on the left
* Shovel and broom holder in front of the front bulkhead
* 2 matt stainless steel toolboxes, approx. 650 x 350 x 320 mm, right side mounted
* Closed side underrun protection can be used as advertising space
----Hydraulics:
* 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation)
* Double-acting control circuit for hydraulic rear door (mounted front right) operated via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023)
* Base frame made of high-strength fine-grain steel
* 20,000 kg tractive force
* Hook height 1,570 mm
* Hooklift operated via radio remote control
* Radio remote control with fast function during tipping, but not during winching
* Emergency stop switches on both left and right sides
* Container bed with 4 side supports each and one roll at the rear
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to assist with raising the main arm
* 2 x mechanical folding rear supports
* Approval for 20 ton gross weight (2 x 9 ton axles) and 2 ton support load
* Note: If the radio control is outside the charging cradle, the service brake must be engaged to enable remote operation. Brake connections must remain connected at all times to operate the hydraulic/pneumatic control valves.
* Monitoring system for underrun protection to ensure it is retracted while tipping
----Loading Height:
* Unladen approx. 1,300 mm with lift axle lowered
----Paintwork:
* Chassis, drawbar, access steps, underrun guard, and folding supports hot-dip galvanized
* Axles, air tanks, and front landing gear painted in black
* Palfinger hooklift painted in black/yellow
----Information:
* Subject to errors and prior sale
* Vehicle in very good / like-new condition
----Delivery Time:
* Vehicle immediately available
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL20 to. Tandem Haken-Containeranh. mit Container
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0
----Braking System:
* Wabco EBS-E electronic braking system
* Emergency release device for spring-actuated cylinders
* Drum brakes
* Duomatic brake connection
----Axle:
* 2 x 9 t SAF axles
* 1st axle as a lift axle (fully automatic)
* Lift axle with +30 mm ride height via actuating cylinder
* Start assist function for maneuvering and forced lowering on the first axle - controlled via speed-dependent EBS electronics (no truck-side installation required, additionally equipped with cable for operation from the tractor)
----Air Suspension:
* Air suspension with lowering function via remote control
----Drawbar / Flange Eye:
* 50 mm flanged drawbar eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load
----Electrics / Lighting:
* 15-pin power connector
* 3-pin 12V auxiliary connector
* LED lighting system 12 / 24V
* 2 LED reversing lights operated via reverse gear
* EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems
* Extended connection cables for agricultural and forestry vehicles
* Wireless power supply 12+24 V via tail light
----General Add-on Parts:
* BPW support winch at the front
* Mechanically extendable underrun protection for container lengths over 6,000 mm
* Speedline diamond-finish aluminum rims
* Pin-type towing coupling (use only when underrun protection is retracted)
* Enclosed plastic half-shell individual mudguards
* Two-step access in front of the front wall on the left
* Shovel and broom holder in front of the front wall
* 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm mounted on the right side
* Enclosed side impact protection can be used as advertising space
----Hydraulics:
* Dual-circuit hydraulic connections (engine side from truck / tractor) rated for 180 bar (for tractor operation)
* Double-acting control circuit for hydraulic tailgate (mounted on the right in the front area), operated via remote control
----Hooklift:
* Palfinger PHT 20 SCASNSLD5 telescopic hooklift unit (Serial No. 100746129, year 2023)
* Main frame made of high-strength fine-grain steel
* 20,000 kg pulling force
* Hook height 1,570 mm
* Hooklift operation via remote control
* Remote control with fast function when lowering, but not when raising
* Emergency stop switch on both left and right sides
* Container support with 4 supports each side and 1 roller each rear
* Hydraulic rear internal locking
* 2 additional hydraulic cylinders to support lifting of the main arm
Giodpsx Dp Amsfx Apbot
* 2 x mechanical fall supports at the rear
* Approval for 20 t total weight (2 x 9 t axles) and 2 t vertical load
* Note: If the remote control is removed from the docking station, the service brake must be engaged to activate the radio control. Brake connections must remain permanently connected to operate the hydraulic/pneumatic valves
* Monitoring system for underrun protection to ensure it is retracted when tipping
----Loading Height:
* Unladen approx. 1,300 mm with lowered lift axle
----Paintwork:
* Chassis, drawbar, step, underrun protection, and fall supports hot-dip galvanized
* Axles, air tanks, and front support winch painted black
* Palfinger hooklift painted black/yellow
----Information:
* Errors and prior sale excepted
* Vehicle is in very good / as-new condition
----Container Dimensions:
* Load length: 5,500 mm
* Load width: 2,300 mm
* Load height: 1,000 mm
Info:
* Mounting brackets for hook systems according to ...

Izvedite več zdaj
+49 201 858 95 507
+49 201 858 95 507
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Coppenbrügge
773 km
Prevoz zabojnikov
Müller-MitteltalCHK - diverse Container
Pokliči
Stanje: rabljeno, Leto izdelave: 2013, Različni kontejnerji za Müller-Mitteltal CHK:
- 7 kosov 4,5 - 5 m³, cena na kos 1.000,- €
Giodpexb N A Ijfx Apbot
- 3 kosi 8 m³, cena na kos 2.000,- €
Vsi kontejnerji so v uporabnem stanju. Letniki 2013 - 2015.
= Dodatne informacije =
Država proizvodnje: DE
Za več informacij kontaktirajte Jan-Marc Schwickert.
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9:
----Brakes:
Giodpfel Th Nrex Apbst
* EBS brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Drawbar height adjustable by 300 mm
* 40 mm flange towing eye
----General Attachments:
* Jost landing gear front
* Rear external folding supports
* Plastic toolbox front right, outside on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----Loading Platform:
* Loading platform 5.37 m
* 50 mm softwood flooring
* Bolted front wall made of smooth sheet steel
* Side walls made of trapezoidal-profile steel sheet, foldable with drop-side spring assist
* Rear wall made of steel, can be slid in between ramp mounts, stored inside in front of the front wall when not in use
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* 1 x 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross-members for 1.2 t lashing options
----Ramps:
* One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm)
* Rear approach incline approx. 860 mm chassis
----Tyres:
* Tyres 235/75 R 17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and 40 mm flange towing eye painted in black
* Drop-sides painted in RAL2011 deep orange
* Painting of the side walls in any RAL colour available at extra cost
----Info:
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available ex Egestorf
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL11,9 to. Tand-Tiefl. / Einschubrampen verzinkt
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9:
----Braking System:
* Electronic braking system (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t Gigant axle assemblies
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar, approx. 300 mm
* 40 mm flange drawbar eye
----General Attachments:
* Jost mechanical landing gear, front
* External, hot-dip galvanized folding supports, rear
* Side underrun protection
* Plastic quarter mudguards
* Plastic toolbox, front right, mounted on front wall outside
----Electrics / Lighting:
* Tire pressure monitoring system (TPMS)
* 15-pin power connector
* LED tail lights
----Loading Platform:
* 50 mm softwood floor
* 20'' container locks mounted at front and rear
* Bolted smooth steel front wall
* Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs
* Hot-dip galvanized, bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side)
* 1 x 6.3 t lashing ring fitted in each corner front and rear
* Various holes in front and rear transverse beams for 1.2 t lashing options
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Rear storage compartment integrated in the chassis below the loading area
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall
* Drop side color in RAL 9010 pure white
* Side panels can be painted in a RAL color at extra cost
----Info:
* New vehicle without registration
* Subject to prior sale and errors excepted
----Delivery Time:
Gsdpel Thy Rsfx Apbsit
* Available immediately from Egestorf
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL11,9 to Tandemtiefl. 5,37 mtr mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9:
----Brakes:
* EBS brake system
* Emergency release device for spring brake cylinders
* Drum brakes, 2 x 5.5 t
----Axles:
* Gigant axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Towing Eye:
* Height-adjustable drawbar by 300 mm
* 40 mm flange towing eye
----General Attachments:
* Jost landing gear at the front
* External folding supports at the rear
* Plastic toolbox, front right outside on the front wall
* Side underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----Loading Platform:
* Platform length 5.37 m
* 50 mm softwood floor
* Bolted smooth sheet steel front wall
Gsdpfjl Th Ncsx Apbjit
* Fold-down side walls made of trapezoidal-profiled steel sheet with board lifting spring
* Rear wall made of steel, insertable between the ramp holders for storage in front of the front wall when not in use
* Rear stanchions bolted
----Load Securing:
* Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm
* Installation of 3 t recessed lashing rings every 600 mm possible
* In each corner front and rear, 1 x 6.3 t lashing ring
* Various holes in front and rear crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical grating loading ramps with spring system for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear approach angle approx. 860 mm chassis
----Tyres:
* Tyres 235/75 R 17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Drawbar, front wall, tailgate, folding supports, loading ramps galvanized
* Axles, springs, air tanks, 40 mm flange towing eye painted in black
* Board walls painted in RAL2011 deep orange
* Side panels available in other RAL colors at extra cost
----Information:
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
----Delivery Time:
* Immediately available ex works Egestorf
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL11,9 to. Tandemtiefl. / Einschubrampen verzinkt
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9:
----Braking System:
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
* Drum brakes
Gedpfsl Tilxjx Apbsit
----Axles:
* 2 x 5.5 t Gigant axle units
----Suspension:
* Parabolic springs with balancing unit
----Drawbar / Flange Eye:
* Drawbar height adjustable by approx. 300 mm
* 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at front
* Bolt-on, hot-dip galvanized folding supports at rear (external)
* Side underrun protection
* Plastic quarter mudguards
* Plastic toolbox on front right, externally mounted on front wall
----Electrics / Lighting:
* Tyre pressure monitoring system (TPMS)
* 15-pin power connector
* LED tail lights
----Load Area:
* 50 mm softwood floor
* 20" container locks mounted at front and rear
* Bolted bulkhead made of smooth steel sheet
* Drop sides made of trapezoidal-profile steel sheet, foldable with sideboard spring lifter
* Hot-dip galvanized bolted rear stanchions
----Load Securing:
* Perforated outer rail, edged at approx. 45°, with lashing capacity of 2 t every 480 mm
* Optional 3 t folding lashing brackets every 600 mm (five lashing rings mounted per side)
* One 6.3 t lashing ring in each corner, front and rear
* Various bores in front and rear crossmembers for 1.2 t lashing points
----Ramps:
* 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Rear storage compartment recessed into the chassis frame under the loading area
----Paintwork:
* Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall
* Sideboard colour in RAL 9010 pure white
* Painting of side walls in a RAL colour of choice available at extra charge
----Information:
* New vehicle, not registered
* Subject to errors and prior sale
----Delivery Time:
* Available immediately from Egestorf
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline:
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Eye:
* Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye
----General Attachments:
* Jost mechanical landing gear (front)
* Two rear mechanical hot-dip galvanized fold-down supports
* Tool box made of galvanized steel sheet, mounted right side
* Plastic quarter mudguards
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin electrical connector
* Bolted underride guard with LED tail lights
----Tipping Platform:
* Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall
* Hot-dip galvanized chassis
* Steel pallet 3-way tipper body, fully galvanized
* Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions
* Tailgate foldable and pendulum-mounted via manual central locking
* Hot-dip galvanized bolted rear stanchion
----Load Securing:
* 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame
* 4 mm steel sheet floor, rear mount rail for ramps
----Ramps:
Gjdpfx Aspk D D Uspbjit
* 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading area at the rear, integrated into the chassis
----Tires:
* 235/75 R 17.5 tires
----Paint Finish:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle is hot-dip galvanized
----Notes:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available immediately from Egestorf on the A7
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL11,9 to Tandemkippanh. verzinkt mit Anlegerampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline:
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalization unit
----Drawbar / Flange Eye:
* Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye
Gedpopk D Dmofx Apboit
----General Attachments:
* Jost mechanical landing gear (front)
* Two rear mechanical hot-dip galvanized fold-down supports
* Tool box made of galvanized steel sheet, mounted right side
* Plastic quarter mudguards
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* 15-pin electrical connector
* Bolted underride guard with LED tail lights
----Tipping Platform:
* Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall
* Hot-dip galvanized chassis
* Steel pallet 3-way tipper body, fully galvanized
* Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions
* Tailgate foldable and pendulum-mounted via manual central locking
* Hot-dip galvanized bolted rear stanchion
----Load Securing:
* 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame
* 4 mm steel sheet floor, rear mount rail for ramps
----Ramps:
* 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading area at the rear, integrated into the chassis
----Tires:
* 235/75 R 17.5 tires
----Paint Finish:
* Axles, springs, air tanks, drawbar and landing gear painted in black
* Vehicle is hot-dip galvanized
----Notes:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Available immediately from Egestorf on the A7
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.670 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline:
----Braking system:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem compensation unit
----Drawbar / Flange Towing Eye:
* 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye
Gisdpjq Hg Dxjfx Apbst
----Electrics / Lighting:
* RDÜ tire pressure monitoring system
* LED lighting
* 15-pin power connector
----General attachments:
* Tool box made of galvanized sheet steel, mounted on the right side
* Bolted underrun guard
* Plastic quarter mudguards
* Jost mechanical landing gear at the front
* Two rear mechanical hot-dip galvanized folding supports
----Tipper body:
* Net hooks on the sides and rear integrated into the central locking brackets as well as 3 pieces mounted externally on the front wall
* Hot-dip galvanized chassis
* Steel 3-way tipping body
* Full-length drop sides without center post, folding down with drop side spring assist
* Rear flap drop-down and swinging, lockable via manual central locking
* Hot-dip galvanized bolted rear stanchion
* 4 mm steel floor plate
* Rear mounting rail for loading ramps
----Load securing:
* 1 x 5 t recessed and foldable lashing ring in each corner
* Additionally, 4 x 3 t recessed and foldable lashing rings in each side frame
----Ramps:
* 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles
* Lockable storage compartment integrated under the loading area at the rear of the chassis
----Tyres:
* Tyres 235/75 R 17.5
----Painting:
* Axles, springs, air tanks, drawbar, and landing gear painted in a shade of black
* Sideboard painted RAL 9010 pure white
* Painting of side walls in any RAL color available at extra cost
* Floor and front wall hot-dip galvanized
----Information:
* Reinforced body with EN 12642 XL load securing certificate
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
----Delivery time:
* Available immediately ex works Egestorf
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Anlegerampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.600 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline:
----Braking system:
* Wabco EBS
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Towing Eye:
* Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange towing eye
----Electrical / Lighting:
* RDÜ tire pressure monitoring system
* LED lighting
* 15-pin power connector
Gisdpfov Dz N Aex Apbjt
----General Attachments:
* Toolbox made of galvanized sheet steel on the right side
* Bolted underrun protection
* Plastic quarter mudguards
* Jost mechanical landing gear at the front
* Two mechanical hot-dip galvanized folding supports at the rear
----Tipper body:
* Mesh hooks on the sides and rear in the central locking mounts plus 3 pieces on the outside of the front panel
* Hot-dip galvanized chassis
* Steel pallet 3-way tipper body
* Continuous, drop-down side walls without center stanchion, with drop-side spring lift assist
* Rear drop gate can be swung down or used as a pendulum via manual central locking
* Hot-dip galvanized, bolted rear stanchion
* 4 mm steel floor plate
* Rear mounting rail for loading ramps
----Load securing:
* One flush-mounted, foldable 5 t lashing ring in each corner
* Four flush-mounted, foldable 3 t lashing rings in the outer frame on each side
----Ramps:
* 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles
* Lockable rear storage compartment underneath the loading area, integrated into the chassis
----Tires:
* Tires 235/75 R 17.5
----Paintwork:
* Axles, springs, air tanks, drawbar, and landing gear painted black
* Drop side painted RAL 9010 pure white
* Painting of the side walls in any RAL color possible for an extra charge
* Floor and front wall hot-dip galvanized
----Information:
* Reinforced body with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
----Delivery time:
* Immediately available from Egestorf
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline"
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem compensating unit
----Drawbar / Flange Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flange eye
----General Fittings:
* Jost mechanical landing gear at front
* Rear: 2 mechanical, hot-dip galvanized drop-down support legs
* Plastic toolbox approx. 750 x 350 x 300 mm, fitted on right side
* Bolted underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* 15-pin power connector
* LED lighting
* TPMS tire pressure monitoring system
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking fixtures, plus 2 at the front wall
* Steel pallet, 3-way tipping body (continuous sidewalls – without center stanchions – foldable with drop side spring assistance)
* Rear stanchions bolted
* Combination steel double rear doors, asymmetrically split, can be swung open and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized swing bolt locking and central locking system
* Deactivation function for automatic rear wall opening when tipping backwards with open door
* 4 mm steel floor plate
* Rear ramp carrier rail for drive-on ramps
----Load Securing:
* 1 x 5 t lashing point in each corner
* 4 x 3 t recessed lashing rings per side, fitted in the outer frame
----Ramps:
* 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for vehicles on rubber tires & tracks
* Lockable storage compartment for ramps under the loading platform, integrated into the chassis
----Paint Finish:
* Drawbar, front wall, tipping platform, rear stanchions, underrun protection, and mechanical support legs hot-dip galvanized
Giodpfx Apsl Thyxsbot
* Sidewalls and tailgate painted RAL 9010 pure white
* Sidewall painting in any RAL color available at extra charge
* Axles, springs, flange eye, air tank, and landing gear painted in a black tone
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Immediately available ex-works Egestorf on A7
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTALAgrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML:
* Without ABS / EBS, approved for 40 km/h
* Spring-loaded parking brake, drum brakes
* Gigant axles
* Tandem equalising unit with 100 mm wide parabolic springs
* Support winch at the front
* Mechanical drop-down supports at the rear
* Fixed welded drawbar with low-maintenance ball coupling for K80 ball head coupling (adjustable by +77 mm / 33 mm via the head plate) with elevated bracket for connection lines
* 12 V 7 + 4 pin power supply
* LED lighting system 12 / 24 V with protective grille
* 2 LED work lights at the rear, switchable from the towing vehicle without additional installations on the tractor unit
* Side marker lamps with indicator function
* Plastic quarter mudguards
* Plastic toolbox approx. 750 x 350 x 300 mm, right side
* Chassis made of high-tensile steel
* Steel platform body, 3-way tipper with M-Strong side boards (fixed front wall, continuous side walls – without central stanchions – swinging via manual central locking as well as mechanically folding down with sideboard spring assist)
* Hydraulic tailgate, 500 mm high, acts as a hydraulic chute with a 115° opening angle
Giodpfx Apor Dpzuebjt
* 4 mm Hardox 450 steel floor
* 1 x 7 t anchor point in each corner and 4 x 3 t lashing rings recessed and foldable on each side
* Galvanised two-step access in front of the front wall (left side)
* 1 pair of aluminium loading ramps (10 t / pair for axle spacing over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles
* 2 recessed ramp compartments at the rear of the chassis, cargo securing according to EN 12642 XL
* --Coupling height loaded approx. 530 mm
* Unloaded approx. 590 mm --
* Bodywork finished in RAL 9010 pure white
* Chassis, drawbar, rear drop supports, underrun protection galvanised
* Axles, air tanks, front support winch
* K80 coupling painted in black tone
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available ex-works Egestorf
Mali oglas
Egestorf
860 km
Prikolica
MÜLLER-MITTELTALNeuer 18 to. Kippbarer Container Anhänger
Pokliči
Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RAK 18.0 External Roller with Rear Tipping Function
----Brake System:
* Wabco EBS-E (electronic brake system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* BPW Eco Plus axles
----Suspension:
* Air suspension (automatic lowering when the brake is disengaged)
----Drawbar:
* Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle
----General Attachments:
* Plastic toolbox – approx. 858 x 500 x 500 mm – mounted on the right side
* Enclosed plastic mudguards front & rear axles
* Enclosed side underrun protection
* Rear underrun protection bolted
Gisdpfxsx Ipbmo Apbjt
* Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm
* Foldable "A"-sign at the rear
* Rear impact protection buffers
----Electrics / Lighting:
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* 15-pin 24V power connector
* LED lighting system for 12 & 24V
* Two additional LED reversing lights
* TPMS (Tire Pressure Monitor System)
----Suitable for Container Lengths:
* suitable for containers from 6500mm to 7000mm
----Container Running Surface / Tipping Bridge:
* External roller guide through flat steel rails with a clear width of approx. 2,180 mm combined with three lateral centering pieces on each side for container guidance
* To support and stop the container rollers, two rear, recessed, tipping frame-mounted roller bearings with pneumatically operated longitudinal securing are supplied
* The positive locking of roll-off containers is accomplished via a front-installed, externally controlled, pneumatic cross clamping unit (one-sided operation)
* Inner chassis with rearward-tipping main frame - engine hydraulically powered tipping device (single-cylinder design)
* Tipping angle 42°
* Rubber pads between chassis and tipping frame
* Containers are loaded from the front, hot-dip galvanized chassis
----Tyres:
* Single tyres 385/55 R 22.5
----Loading Height:
* Unladen approx. 1,270 mm
----Paintwork:
* Underrun protection and locking parts (without final coat)
* Bogie, air tanks, axles, slewing ring and drawbar painted in black tone
* Hot-dip galvanized
----Information:
* For container transport according to DIN 30722 Part 1
* New vehicle without initial registration with manufacturer's warranty
* Subject to errors and prior sale
* Sample images (vehicle images may differ due to optional equipment)
----Delivery Time:
* Available from week 24/2026
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTALAgrar Tand. 3- Seiten, hydr. Heckklappe, Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML:
* Without ABS / EBS, approved for 40 km/h
* Spring-loaded parking brake, drum brakes
* Gigant axles
* Tandem compensating aggregate with 100 mm wide parabolic springs
Gsdpjr Dpz Hsfx Apbjit
* Support windlass at the front
* Mechanical drop-down supports at the rear
* Fixed welded drawbar with low-maintenance K80 ball coupling (offset by +77 mm / 33 mm adjustable via head plate) with elevated gantry for connection lines
* 12 V 7 + 4 pole electrical wiring
* LED lighting system 12 / 24 V with protective grille
* 2 LED work lights at the rear, switchable from towing vehicle without vehicle-side installation
* Side marker lights with indicator control
* Plastic quarter mudguards
* Plastic toolbox approx. 750 x 350 x 300 mm, right side
* Chassis made of fine-grain steel
* Steel Pal.- three-way tipper body with M-Strong side walls (fixed front wall, continuous side walls without central stanchions, swinging via manual central locking and mechanically foldable with side wall spring lifter
* Hydraulic tailgate, 500 mm high, acts as a hydraulic chute with a 115° opening angle
* 4 mm Hardox 450 steel floor
* In each corner 1 x 7 t, and on each side 4 x 3 t recessed and foldable lashing rings
* Hot-dip galvanized two-step access ladder in front of the front wall (left side)
* 1 pair of aluminum ramps (10 t/pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles
* 2 rear-integrated storage compartments for aluminum ramps in the chassis; load securing according to EN 12642 XL
* --Coupling height loaded approx. 530 mm
* unloaded approx. 590 mm--
* Body paint finish in RAL 9010 pure white
* Chassis, drawbar, rear drop supports, underrun protection are hot-dip galvanized
* Axles, air tanks, front support windlass
* K80 coupling painted in a shade of black
* New vehicle with manufacturer warranty
* Errors and prior sale reserved
* Immediately available ex Egestorf
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline"
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem load equalization unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical hot-dip galvanized folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, on the right-hand side
* Bolted underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* 15-pin power connector
* LED lighting
* TPMS tire pressure monitoring system
----Tipper Body:
* Net hooks at sides and rear in the central locking compartments, as well as 2 units on the front wall
* Steel palletized 3-way tipper body (continuous side walls—without central stanchions—foldable with board spring-lifter)
* Rear stanchions bolted
* Combination steel double-wing rear doors, asymmetrically divided, can be opened and locked at 270°, not foldable—with additional swinging frame for automatic rear tailgate opening during tipping process; locking via galvanized locking rods and central locking
Giodel Thymepfx Apbst
* Deactivation function for automatic rear tailgate operation when tipping backwards with open wing door
* 4 mm steel chequer plate floor
* Rear mounting rail for loading ramps
----Load Securing:
* One 5 t lashing ring per corner
* Four 3 t lashing rings each side, recessed into the outer frame
----Ramps:
* 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable rear storage compartment beneath the loading area, integrated into the chassis
----Paintwork:
* Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized
* Side walls and tailgate painted in RAL 9010 pure white
* Side wall painting in other RAL color shades available for an additional charge
* Axles, springs, flange eye, air tanks, and landing gear painted in black
----Information:
* Reinforced body with cargo securing certificate according to EN 12642 XL
* New vehicle, without initial registration, with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery time:
* Immediately available ex works Egestorf on the A7 Motorway
Mali oglas
Egestorf
860 km
Odvozna prikolica
MÜLLER-MITTELTALNeuer 18 to. Kippbarer Container Anhänger
Pokliči
Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, RAK 18.0 External Roller with Rearward Tipping Function
----Brake System:
* Wabco EBS-E (electronic braking system)
* Emergency release mechanism for spring-loaded cylinders
* Drum brakes
----Axle:
* BPW Eco Plus axles
----Suspension:
* Air suspension (automatic lowering when disconnecting the brake)
----Towing Bar:
* Pneumatically lowerable drawbar, approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle
----General Attachments:
* Plastic toolbox - approx. 858 x 500 x 500 mm - mounted right side
* Enclosed plastic mudguards front & rear axle
* Enclosed side underrun protection
* Bolt-on rear underrun protection
* Storage box for container nets made of galvanized perforated sheet, approx. 1,000 x 500 x 500 mm
* Foldable A-board at the rear
* Rear impact protection buffers
----Electrical / Lighting:
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* 15-pin 24V power connector
* LED lighting system for 12 & 24V
Gsdpfx Apox Ipa Asbsit
* 2 additional LED reverse lights
* RDÜ tire pressure monitoring system
----Suitable for Container Lengths:
* For containers 6,500 mm to 7,000 mm
----Container Running Surface / Tipping Platform:
* External roller guidance through flat steel limits at approx. 2,180 mm clear width, in combination with 3 centering pads per side for container guidance
* For accommodating and supporting the container rollers, there are 2 recessed, tipper frame-connected roller mounts at the rear, with pneumatic safety lock against longitudinal movement
* The positive locking of the roll-off containers is by a pneumatic cross-clamping unit (operable from one side), installed at the front of the tipping frame and accessible externally
* Chassis frame with internally rearward-tipping main frame - hydraulically operated tipping unit (single-cylinder design)
* Tipping angle 42°
* Rubber pads between chassis and tipping frame
* Loading of containers from the front; hot-dip galvanized chassis
----Tyres:
* Single tyres 385/55 R 22.5
----Loading Height:
* Unladen approx. 1,270 mm
----Paintwork:
* Underrun protection and locking parts (unfinished, without top coat)
* Bogie, air tanks, axles, slewing ring, and drawbar painted in black
* Hot-dip galvanized
----Information:
* For container transport according to DIN 30722 Part 1
* New vehicle, no initial registration, with manufacturer warranty
* Subject to errors and prior sale
* Sample photos (vehicle images may vary due to special equipment)
----Delivery Time:
* Available from CW 24/2026
Mali oglas
Wenzendorf
885 km
Polpriklopnik
MÜLLER-MITTELTALMitteltal SF32 BM/BT Liebherr 10m³ Lift
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 25.230 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2012, Oprema: ABS, Müller Mitteltal 2-axle concrete semi-trailer, model SF32 BM/BT, superstructure type: HTM 1004 Liebherr, 10 m³, year of manufacture 2012; BPW axles, drum brakes, air suspension, lift axle, underrun protection, EBS, ABS.
Single ownership
Gjdpfxordt H Es Apbsit
Inspection book available
Permissible total weight: 32,000 kg
Unladen weight: 6,770 kg
Mali oglas
Bovenden
710 km
Prikolica z nizko platformo
Müller-MitteltalT 3 Profi 30,0, hydr. Rampen
Pokliči
Stanje: rabljeno, lastna masa: 6.400 kg, največja dovoljena obremenitev: 23.600 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2013, dolžina tovornega prostora: 7.800 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 920 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: rumena, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: v tranzitu / na poti, 3 osi, vrtljiva vlečna gred, listnato vzmetenje, ABS (protiblokirni sistem), pritrdilna ušesa, hidravlične rampe, zadnja opora, stranska aluminijasta zaščita, dvojna kolesa. Nadgradnja: 3-osna nizkopodna prikolica s hidravličnimi naletnimi rampami, pocinkane rampe, 3x 10t osi! Vsi podatki brez garancije, saj je vozilo v tranzitu! PODATKI O DODATNI OPREMI BREZ GARANCIJE, pridržujemo si pravico do sprememb, vmesne prodaje in napak!
Gisdpfxoy R Ekie Apbot
Mali oglas
Egestorf
860 km
Odvozna prikolica
MÜLLER-MITTELTALRA-T 18,0 Außenroller, feuerverzinkt, Neu
Pokliči
Stanje: novo, največja dovoljena obremenitev: 14.620 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RA-T 18.0 / 018:
* Wabco EBS-E (electronic braking system)
* RDÜ tyre pressure monitoring system
* Emergency release for spring brake cylinders
* Disc brakes
* 2 x 10 t BPW wide-track axles
Gjdpfx Apsv Nulzjbjit
* Air suspension (automatic lowering when brake is uncoupled)
* Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle
* Plastic toolbox 450 x 470 mm mounted right side
* Side-mounted mesh box 1,000 x 500 x 5000 mm
* Enclosed plastic mudguards front & rear
* Closed side underrun protection, suitable as advertising panel
* Rear underrun protection
* Rear plastic anti-collision buffers
* Rear ADR plate
* 15-pin electrical connector
* LED tail lights
* Track length approx. 6,830 mm
* Pneumatic 4-point clamping lock
* Mechanically adjustable stop brackets (2 positions) front left and right on the guide tracks
* 265/70 R 19.5 twin tyres
* Unladen weight: 3,220 kg
* --Permissible gross weight technically up to 20,000 kg--
* Ride height loaded: approx. 1,130 mm
* Suitable for container lengths of 5,500 – 7,000 mm
* Hot-dip galvanized chassis
* Air tanks, axles, turntable, and drawbar
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Available from approx. week 29 / 2026
Znak zaupanja
Prodajalci, certificirani pri TruckScout24

Mali oglas
Coppenbrügge
773 km
Nizki nakladalnik
Müller-MitteltalT 3 Profi 30
Pokliči
Stanje: rabljeno, konfiguracija osi: 3 osi, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 235-75R17.5, Leto izdelave: 2010, 3-osni nizek priklopnik, dostopen od zadaj. Dovoljena skupna masa 30.000 kg, nosilnost 22.700 kg. Nakladalna površina 8.900 mm (7.000 + 1.900) x 2.550 mm, opozorilni paket za prekomerno širino, 12 pritrdilnih ušes ter 8 žepov za stebričke z možnostjo istočasnega pritrjevanja, 6 orodnih zabojev. Dvodelne hidravlične rampe cca. 2.100+2.000 x 800 mm z gumijasto oblogo, hidravlično zadnjo podporo. BPW osi, EBS, parabolično vzmetenje z izravnalno enoto, pnevmatike 235-75 R 17.5. Pokrivljena vlečna roka, premična vlečna kljuka 40+50 mm. 2-cevni zračni (duomatik) in 2-cevni hidravlični priključek, 24 voltov. Višina nakladanja praznega vozila cca. 910 mm. Barva oranžna. Tehnični pregled veljaven do 03-2027.
= Dodatne informacije =
Dimenzije pnevmatik: 235-75R17.5
Vzmetenje: parabolično vzmetenje
Lastna masa: 7.300 kg
Nosilnost: 22.700 kg
Gedpfoy Evvlsx Apbjit
Skupna dovoljena masa: 30.000 kg
Država proizvodnje: DE
Za več informacij se obrnite na Jan-Marc Schwickert.
Mali oglas
Bovenden
710 km
Prikolica z nizko platformo
Müller-MitteltalT 40, Verbr. auf 3m, hydr. Rampen
Pokliči
Stanje: rabljeno, lastna masa: 8.800 kg, največja dovoljena obremenitev: 31.200 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/1996, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 1 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, 4 osi, vrtljiva gred, listnato vzmetenje, razširljiv do 3 m, pritrdilna ušesa, dvo-delne nakladalne rampe, hidravlične rampe, zadnja podpora, stranska aluminijasta zaščita, dvojne pnevmatike, škatla za orodje. Nadgradnja: 4-osna nizkopodna prikolica s hidravličnimi dvodelnimi rampami. Višina nakladanja cca 900 mm. 4x SAF osi 10t, bobnaste zavore, vlečno uho 40 in 50 mm! Dolžina zgornje ploščadi cca 2900 mm! Dolžina spodnje ploščadi cca 7100 mm! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane!
Gedoywvhrjpfx Apbeit
Mali oglas
Bovenden
710 km
Prikolica z nizko platformo
Müller-MitteltalT 3 Kompakt 30,0, Hydr. Rampen, Verbr. auf 3m
Pokliči
Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2008, naslednji pregled (TÜV): 03/2024, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 910 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear supports, side aluminum underrun protection, twin tires, storage box
Gisdpfxoqpgtms Apbjt
Body: Hydraulic ramps, extendable to 3m. BPW axles, drum brakes, lashing rings on the outer sides.
Ramp length approx. 4000mm! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!
Mali oglas
Bovenden
710 km
Prikolica z nizko platformo
Müller-MitteltalETS-TA-B 10,7
Pokliči
Stanje: rabljeno, lastna masa: 2.380 kg, največja dovoljena obremenitev: 8.320 kg, skupna masa: 10.700 kg, konfiguracija osi: 2 osi, prva registracija: 04/2016, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.030 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: srebrn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 2 osi, BPW osi, tandem, listnato vzmetenje, ABS (protiblokirni sistem), sidrne zanke, mehanske rampe, sprednja opora, zadnja opora, bočna aluminijasta zaščita, zaboji za orodje, višinsko nastavljiva vlečna droga. Nadgradnja: tandem nizkopodni priklopnik z mehanskimi nakladalnimi rampami, pocinkane rampe, 2x BPW os, bobnaste zavore! Višina nakladanja cca 700 mm! Dolžina ramp cca 2200 mm! PODATKI O DODATNI OPREMI BREZ JAMSTVA, pridržujemo si pravico do sprememb, vmesne prodaje in napak!
Gjdpfx Aoxqhltjpboit
Olajšamo vam iskanje: "müller mitteltal ka-ta-r 14,4 14,4 t tandemkipper- tieflader, breitbereift"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.

Izvedite več zdaj
+49 201 858 95 507
+49 201 858 95 507
Objavite oglas zdaj
*na oglas/mesec




























































































































































































































































































































































































































































