Möslein Tt21-7,2 Hydr 21 T Tandemtieflader, Hydr. Rampen, Neu nakup rabljenega (60.004)

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lower system and RtR-valve * Smart Board installed on trailer as information tool (axle load display - separate for front and rear) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Contour tape on sides and rear, reflective * 15-pin power plug * LED lighting 12 / 24 V * LED beacon (removable) at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder coated, side right * Compartment in rotary frame for accessories with folding lid, 2 pcs. container locks permanently installed (directly after turntable platform) * ROBOT welded anti-slip coating on the steel plate of the rotary frame platform (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) at front left & right on front wall bearer, front & rear 1 pair of UVV lashing rings (13.4 t), and on each side 3 pairs of UVV lashing rings (10 t) pivotable and lowerable, loadable in all directions and embedded in the outer frame, each side with 3 stake pockets with simultaneous 2 t lashing option * 6 pairs mechanical folding outriggers for 3 m total width (not in the rear taper) * Extension boards stored in the middle of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm storage over rear axle, continuous to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6400 daN in excavator arm storage at side in longitudinal frame * 2 steps galvanized at rotary frame left + right * Profifix lashing strip centered in longitudinal axis, in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tank, tow bar painted in black tone * Loading edge loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer warranty Fedstplwiepfx Al Hsgb * Errors and intermediate sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including raising/lowering (RtR) valve * Smart-board infotool mounted on trailer (for separate axle load display front/rear) * Tire pressure monitoring with display option in the truck via EBS signal—no installation required on the truck side * Side underrun protection Fgedpfx Aljxptn Rs Hob * Rear swing-down support legs on chassis frame * Mechanically adjustable warning sign packages front and rear * Front plastic quarter mudguards with splash guards * Rear straight galvanized steel skirts with splash guards * Reflective contour tape on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar, 1,200 mm long with 40 mm towing eye, height adjustable via drawbar spring & turnbuckle * Tool box made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted on right side * Box in turntable for accessories with folding lid, 2 container locks permanently installed (directly behind the turntable platform) * Robot-welded anti-slip coating on the steel plate of the turntable platform (projecting weld beads) * Load securing package consisting of: 2 lashing rings (13.4 t) front left & right on bulkhead support, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and recessed into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear slope) * Widening boards stored in the center of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically side-adjustable * 4-way control block for future retrofitting of hydraulic ramp shift * Excavator arm storage above rear axle, continuous up to end cross member (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6,400 daN in the excavator arm storage, mounted on the side in the longitudinal frame * 2 galvanized steps on turntable left & right * Profifix lashing rail along the longitudinal axis in the center, on flat area, lashing capacity up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and drive-on ramps hot-dip galvanized * Axles, turntable ring, air reservoirs, towing fork painted black * Loading edge height approx. 910 mm +/- 20 mm (depending on air suspension) * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks under low-bed platform 70 mm timber for widening to 3,000 mm Fodpfx Alsrducpo Hogb Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Drawbar with certified 50 mm towing eye Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Wheels and tires 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 25.562 km, moč: 353 kW (479,95 KM), prva registracija: 08/2021, vrsta goriva: dizel, konfiguracija osi: 8x4, gorivo: dizel, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, skupna dolžina: 9.090 mm, skupna širina: 2.540 mm, skupna višina: 3.610 mm, Leto izdelave: 2021, Oprema: AdBlue, = Additional Options and Accessories = - PTO (Power Take-Off) = Further Information = Technical Information Number of cylinders: 6 Engine capacity: 12,809 cc Front axle 1: Steered Front axle 2: Steered Weights Unladen weight: 17,150 kg Payload: 18,850 kg gross vehicle weight: 36,000 kg Functional Pump: Yes Condition Technical condition: very good Visual condition: very good MERCEDES AROCS 8X4 WITH MULTILIFT ULT T 21 S 51 ROLL-OFF TIPPER + HIAB X-HIPRO 232 E-6 CRANE EURO 6 L PACKAGE 480 HP DRIVE 8X4 AP AXLES AIR SUSPENSION WHEELBASE 515 CM Fedpfx Aeyiuk Iel Hogb MODEL AROCS CAB WITH AIR CONDITIONING AUTOMATIC TRANSMISSION WITH ENGINE BRAKE MULTILIFT 21 TON ROLL-OFF TIPPER TYPE: ULT T 21 S 51 ADJUSTABLE UNDERRIDE GUARD HYDRAULIC CONTAINER LOCKING HIAB X-HIPRO 232 E-6 CRANE 6X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL 5TH + 6TH FUNCTION ON THE CRANE OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 5,400 KG MAX WORKING HEIGHT 2,000 CM MAX LIFTING CAPACITY AT 200 CM 870 KG 2X OUTRIGGERS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Fedjmfqi Ijpfx Al Hegb Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with raising/lowering system and RtR valve * Manometer pressure display for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Reflective contour markings on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) * Tow bar with 50 mm towing eye and height adjustment * Tool box made of galvanized steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOTER-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing ring front left & right in front of bulkhead support, 4 mounting holes per side in the turntable platform each with 2 t lashing capacity, 1 pair of 13.4 t lashing rings suspended at rear left & right before the rear cross member, 4 pairs of 10 t UVV lashing rings per side, swiveling and lowerable, loadable in all directions and recessed into side frame, 3 stake pockets per side with 2 t lashing option each * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not on the rear slope) * Timber plank holder for width extensions under the chassis, longitudinal left * Excavator arm rest above rear axle up to end plate, approx. 2,100 mm long and 190 mm deep, 2 pairs of 6.4 t lashing rings per side in the excavator arm rest * Hardwood flooring on the running surfaces of the low-loader platform * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), mechanically adjustable width Fgodpjl Tlhrefx Al Hob * Ramp outer planks made of hardwood * Steel construction prepped for 6-way control sliders * Unladen loading height approx. 950 mm +/- 20 mm (chassis) * Turntable, folding outriggers, mechanical support legs, ramps are hot-dip galvanized * -- Axles, air tanks, tow bar painted black -- * Tyres 235/75 R 17.5 * Vehicle registered for one day in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering function as well as return-to-ride valve * Pressure gauge for axle load determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning panels front and rear * Front axle: plastic quarter mudguards with spray guards * Rear axle: straight, galvanized steel side skirts with spray guards * Reflective contour marking tape, side and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable rear LED beacon * 2 LED reverse lights (controlled by reverse gear) * Drawbar with 50 mm towing eye and height adjustment * Tool box made of galvanized sheet steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front section ahead of turntable platform approx. 490 mm long with 45° corners * ROBOT-welded anti-slip coating on the steel plate of the turntable platform * Load securing package consisting of: 1 x 13.4 t UVV lashing eye left & right in front of front bulkhead support, 4 holes per side in the turntable platform for 2 t lashing capacity each, 1 pair of lashing eyes (13.4 t) hanging at the rear left & right in front of the end support, 4 pairs per side of UVV lashing rings (10 t) that can be swivelled and lowered, loadable in all directions and recessed in the outer frame, 3 stake pockets per side with simultaneous 2 t lashing possibility * Hot-dip galvanized mechanical fold-out outriggers for 3 m overall width (not in the rear slope) Fgodpfx Alol Tnu Aj Hob * Plank holder for extensions mounted longitudinally under the chassis on the left * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long and approx. 190 mm deep, with 2 pairs per side of 6.4 t lashing eyes in the excavator arm rest * Hardwood floor on the running surfaces of the low bed platform * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * Outer boards of the loading ramps made of hardwood * Steel construction prepared for 6-valve control block * Loading edge unladen approx. 950 mm +/- 20 mm chassis * Turntable, fold-out outriggers, mechanical drop supports, loading ramps hot-dip galvanized * --Axles, air tanks, and drawbar painted in black shade-- * Tires 235/75 R 17.5 * The vehicle has a day registration from 07/2024, due to the lack of a tire pressure monitoring system, and has not been loaded or used * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 4 x 11 t Gigant axles Fsdpforczm Dex Al Hjgb * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Warning panel packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * LED beacon (removable) on the rear * 24 V 15-pin, plus additional 12 V 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at the front * Straight steel rear mudflaps each with spray suppression (splash suppression) * Side underrun protection * Extended drop member by 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 integrated lockable storage compartments incl. lids * Chassis made of high-strength fine-grain steel * Floor over turntable platform: 50 mm, low-loader platform: 60 mm softwood * Outer planks of the loading ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included), each with 2 t lashing capability * Load securing package includes: 2 lashing eyes 6.4 t front left and right on main turntable frame, side front and rear each 1 pair 13.4 t lashing rings on outer frame, 4 pairs per side 10 t swiveling and lowerable lashing rings loadable from all directions recessed in outer frame, 2 pairs 6.4 t lashing rings on each side in the excavator arm rest, 8 pairs galvanized folding outriggers for 3 meter total width (not at the rear bevel) * Widening planks stowed in a compartment on the left side * Excavator arm rest above the rear axle to end of approach ramp approx. 2,300 x 740 x 190 mm * Mechanical drop supports at the rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift via sliding pipe from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach ramp) * Chassis, turntable, loading ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air reservoir and slewing ring painted in black tone * New vehicle with manufacturer's warranty * Errors and interim sale reserved * Available from CW 21 / 2026

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation, front and rear * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon, rear * 24 V – 15-pin and additional 12 V – 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design, mounted right side * Closed single plastic mudguards front * Rear straight steel mud flaps each with spray suppression * Lateral underrun protection * Extended offset crank by 500 mm to the front * Turntable platform front section extended by 520 mm with 45° corners and 3 integrated, lockable storage compartments with lids Fedpfx Aol Th Evol Hegb * Chassis made from high-strength fine-grained steel * Flooring over turntable platform made of 50 mm softwood, and in lowbed platform from 60 mm softwood * Outer boards of access ramps made of 50 mm bamboo * Four stake pockets per side (stakes not included), each with 2 t lashing point capacity * Lashing package consisting of: 2 lashing eyes 6.4 t on main frame of turntable platform (front left and right); 1 pair of 13.4 t lashing rings per side front and rear on outer frame; 4 pairs per side of 10 t pivoting and lowerable lashing rings, loadable in all directions, recessed in outer frame; 2 pairs of 6.4 t lashing rings on each side in the excavator arm recess; 8 pairs galvanized folding markers for 3 m overall width (not on rear slope) * Extension planks stored in left-side compartment * Excavator arm recess above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports rear * Hydraulic, hot-dip galvanized access ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp adjustment via sliding tube from ramp shaft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded loading height approx. 860 mm (includes 860 mm approach slope) * Chassis, turntable, loading ramps, mechanical folding supports rear hot-dip galvanized * Axles, springs, air tanks and turntable painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 21/2026

Stanje: rabljeno, lastna masa: 10.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Sturdy steel frame weldment with front frame camber and level loading platform, rear tapered edge approx. 500x100 mm - Neck 200 mm with beveled front corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outwards as a hole-type external frame - Load deck with extendable center frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame in front of and behind the division with 80x80 mm step Fgjdpfsxxl E Hex Al Heb - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without covering), approx. 220 mm deep, approx. 600 mm wide, starting after 2nd axle to end of vehicle - 1 pair wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm Ramps: - 2 pieces 2-part loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting unit (only in combination with electro-hydraulic unit) - Width approx. 800 mm - Wood covering - Incl. traction ribs on loading ramps - Lockable in transport position with lashing straps - Operation by control lever mounted at rear right in frame - Laterally hydraulically adjustable Flooring: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift and lowering device with total lift approx. 200 mm - 2nd driving height via ball valve +50 mm - 1st axle liftable (wired via EBS), automatic activation with mechanical emergency operation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centrally aligned offset - 12 tyres, 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum underrun protection - 4 wheel chocks with holders - Long license plate holder on end cross member - 1 ECE sign insertable at rear - 11 pairs of 10t lashing modules on the side: - 2x on the gooseneck - 2x on the deck before extension - 7x after extension - Pull-out warning signs incl. 3 position lamps each, front at landing gear and rear before end cross member, continuously extendable up to deck width of 4,500 mm - 4 mountings for warning signs to be inserted into stake pockets on the deck - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inwards to main frame (1x before, 1x after king pin positions) - 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on deck from outer frame inwards to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in the load deck for container locks to accommodate 1x 20ft container

Stanje: novo, največja dovoljena obremenitev: 37.619 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.240 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2025, Oprema: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture: 2025 | NEW | 40-t ramps | Top equipment Location: Germany Condition: New / unused Availability: Immediate Description: For sale: brand new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Fgsdpfox Efzujx Al Heb Robust chassis, high-quality axles, heavy-duty ramps – ready for immediate use. --- Technical Specifications Dimensions - Total length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm - Overall width: 2,550 mm (extendable by +600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights - Perm. total weight at 80 km/h: 48,000 kg - Perm. total weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - King pin load: up to 18,000 kg --- Running Gear & Axles - 3 BPW axles, air suspension, drum brakes - 1 rear trailing axle - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tire pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area - Foldable 40-t drive-on ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45-mm hardwood floor + checker plate over wheel arches --- Load Securing - Multiple lashing points, 8,000 daN and 13,400 daN - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - Front board 450 mm, side & rear walls made of aluminium --- Body & Chassis - High-strength S700 MC steel - Partial metallisation (Zn/Al 85/15) – superior corrosion protection - Rear angle: 10°, 500 mm - 2" king pin - Mechanical support legs at the front - 45-t rear supports --- Equipment - 2× toolboxes - Rotating beacon - LED lighting - Reverse work lights - Wheel chocks - Extensions 9×2 (up to +300 mm) - Stake box - Reflective strips on sides and rear --- Colour: RAL 3020 traffic red For further information, please feel free to contact us.

Stanje: novo, lastna masa: 500 kg, največja dovoljena obremenitev: 1.300 kg, skupna masa: 1.800 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 3.150 mm, širina tovornega prostora: 1.580 mm, višina nakladalnega prostora: 1.900 mm, vzmetenje: drugo, velikost pnevmatike: 185 r14 c, Box Trailer Major X-pert Edition Outstanding box trailer with an attractive design. 315x158x 1800 kg, single axle 100 km/h Ramp + side door Low fuel consumption, comfortable driving, sandwich panel construction Fgsdpfxjqwkt Re Al Heb Equipped with special rails for attaching lashing rings anywhere, allowing cargo to be secured at any position. If you have any questions, please send us a message or call us! Technical modifications, price changes, errors, and prior sale reserved. We accept no liability for errors or typographical mistakes.

Stanje: novo, lastna masa: 390 kg, največja dovoljena obremenitev: 1.382 kg, skupna masa: 1.800 kg, velikost pnevmatike: 195/50r13, NEW with us + at a SPECIAL PRICE: Immediately available Here you'll find the ideal car trailer for your needs! Perfectly suited for transporting smaller vehicles such as Smart cars, ride-on mowers, motorcycles, machinery, and much more! The trailer offers a high payload capacity of approx. 1382 kg, with a permissible total weight of 1800 kg and an unladen weight of approx. 418 kg. Standard features include loading ramps and robust coupling eyes to ensure safe transport of your cargo. Make your transport tasks even easier. This trailer can be equipped with various accessories: - Higher side panels, 30 cm - Winch - 100 km/h road approval - Support legs Long axles positioned under the loading platform = reduced overall width + increased usable space Internal width! Tyres: 195/50R13 Automatic jockey wheel Foldable and removable aluminium sidewalls Fgedpeqwz U Hjfx Al Heb V-drawbar Very robust, recessed tie-down points in the platform Phenolic resin-coated anti-slip plywood floor 13-pin plug + safety lighting + reflectors If you have any questions, please send us a message or give us a call! Technical modifications, price changes, errors and prior sale reserved. No liability is accepted for mistakes or typographical errors.

Stanje: novo, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, vzmetenje: drugo, Durability is the new efficiency. *IMMEDIATE AVAILABILITY* High-loader 3116 GD 2000kg - Winch and ramps - 30 cm drop sides - 70 cm leaf mesh sides, swingable * Overrun brake with automatic reversing function * Chassis, axles and V-drawbar galvanized * Rubber suspension axles * Lighting bar * Reinforced, folding, centrally positioned jockey wheel * 10 lashing rings * Net hooks * Support legs * Aluminum sidewalls * All 4 sides foldable and removable Fgodpoqw Algofx Al Hsb Technical specifications Axle(s): 2 Braked: Yes Unladen weight: 429kg Gross weight: 2000kg Load bed length: 311cm Load bed width: 160cm Loading height: 56cm Side wall height: 30cm Drive-on ramps: Yes Storage compartment for drive-on ramps: Yes If you are offered the same trailer at a lower price, please provide us with the offer! If you have any questions, send us a message or give us a call! Subject to technical modifications, price changes, errors and prior sale. No liability is accepted for errors or typographical mistakes.

Stanje: novo, lastna masa: 632 kg, največja dovoljena obremenitev: 2.068 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.060 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 1.000 mm, vzmetenje: drugo, velikost pnevmatike: 195/55r10   , Car Transport Trailer NEW Specifications: Internal dimensions, LxW (cm): 406x200 Overall dimensions, LxW (cm): 560x206 Railing height: 10 cm Loading height (cm): 56 Gross weight (kg): Unladen weight: 632 kg Axles: 2 Braked Tyres: 195/55R10 Floor: Multiplex Fgsdpfxjqwk Swj Al Hsb Loading system: Ramps Welded and hot-dip galvanized frame If you have any questions, please send us a message or give us a call! Technical modifications, changes in price, errors and prior sale reserved. No liability for errors or typographical mistakes.

Stanje: novo, lastna masa: 612 kg, največja dovoljena obremenitev: 2.080 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.060 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 100 mm, velikost pnevmatike: 195/55r    , !!!IMMEDIATELY Available!!! Robust car transporter trailer with excellent road handling Specifications: Internal dimensions, LxW (cm): 406x Overall dimensions, LxW (cm): 560x Railing: 10 cm high Loading height (cm): Gross weight (kg): Unladen weight: 632 kg Axles: 2 Braked Tyres: 195/55R Floor plate: Multiplex Loading system: Ramps Welded & galvanized frame Accessories available at extra cost 100 km/h preparation (4 shock absorbers installed) If you have any questions, please send us a message or call us! Fgedpfxsqwz Rij Al Hjb Technical modifications, price changes, errors, and prior sale reserved. No liability is accepted for errors or typographical mistakes.

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem equalising unit with 100 mm wide parabolic springs * Support winch at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance ball coupling for K80 ball head coupling (adjustable by +77 mm / 33 mm via the head plate) with elevated bracket for connection lines * 12 V 7 + 4 pin power supply * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, switchable from the towing vehicle without additional installations on the tractor unit * Side marker lamps with indicator function * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side Fgsdpjr Dpzuofx Al Heb * Chassis made of high-tensile steel * Steel platform body, 3-way tipper with M-Strong side boards (fixed front wall, continuous side walls – without central stanchions – swinging via manual central locking as well as mechanically folding down with sideboard spring assist) * Hydraulic tailgate, 500 mm high, acts as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * 1 x 7 t anchor point in each corner and 4 x 3 t lashing rings recessed and foldable on each side * Galvanised two-step access in front of the front wall (left side) * 1 pair of aluminium loading ramps (10 t / pair for axle spacing over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tyred and tracked vehicles * 2 recessed ramp compartments at the rear of the chassis, cargo securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm * Unloaded approx. 590 mm -- * Bodywork finished in RAL 9010 pure white * Chassis, drawbar, rear drop supports, underrun protection galvanised * Axles, air tanks, front support winch * K80 coupling painted in black tone * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available ex-works Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS, approved for 40 km/h * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem compensating aggregate with 100 mm wide parabolic springs * Support windlass at the front * Mechanical drop-down supports at the rear * Fixed welded drawbar with low-maintenance K80 ball coupling (offset by +77 mm / 33 mm adjustable via head plate) with elevated gantry for connection lines * 12 V 7 + 4 pole electrical wiring * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, switchable from towing vehicle without vehicle-side installation * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Chassis made of fine-grain steel Fjdpfsr Dpz Hex Al Hogb * Steel Pal.- three-way tipper body with M-Strong side walls (fixed front wall, continuous side walls without central stanchions, swinging via manual central locking and mechanically foldable with side wall spring lifter * Hydraulic tailgate, 500 mm high, acts as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor * In each corner 1 x 7 t, and on each side 4 x 3 t recessed and foldable lashing rings * Hot-dip galvanized two-step access ladder in front of the front wall (left side) * 1 pair of aluminum ramps (10 t/pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 rear-integrated storage compartments for aluminum ramps in the chassis; load securing according to EN 12642 XL * --Coupling height loaded approx. 530 mm * unloaded approx. 590 mm-- * Body paint finish in RAL 9010 pure white * Chassis, drawbar, rear drop supports, underrun protection are hot-dip galvanized * Axles, air tanks, front support windlass * K80 coupling painted in a shade of black * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 8.620 kg, skupna masa: 11.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.120 mm, širina tovornega prostora: 2.430 mm, vzmetenje: jeklo, velikost pnevmatike: 355/60 R 18, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 355/60 R 18, velikost zadnje pnevmatike: 355/60 R 18, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Three-way tipper, 600 mm high drop sides, galvanized, wide tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear drop sides, side drop sides swing and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grained steel, 12 heavy-duty recessed lashing rings in the floor, tipping angle: 50 degrees to the rear and 45 degrees to the side, stepless height-adjustable drawbar, removable stakes at the rear, gear support winch with load and fast speed, front-mounted, integrated compartment in the chassis for two aluminum loading ramps, contour marking in accordance with ECE R 048 regulation, surcharge for aluminum ramps (load capacity per pair 10 t) and 2 folding supports at the rear, ramps suitable for steel-tracked and rubber-tired vehicles, price: 1,500 euros, -- Typographical errors, mistakes, and changes reserved, sample images --, For more information: !, More details: ! Fgodsy Rr Emjpfx Al Heb

Stanje: novo, lastna masa: 2.850 kg, največja dovoljena obremenitev: 7.650 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.280 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.580 mm, prostornina tovornega prostora: 46 m³, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245/70 R 17,5, velikost zadnje pnevmatike: 245/70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, 2 x row combination lashing rails, 7 pairs of lashing rings in the floor, load securing according to EN 12642 Code XL, 1 x interior light, sidewall and front wall thickness approx. 17 mm each, rental price from €580 per month, -- typographical errors, mistakes and changes reserved, sample images --, More data at: !, More details: ! Fedpsy Rll Hjfx Al Hsgb

Stanje: rabljeno, lastna masa: 3.580 kg, največja dovoljena obremenitev: 6.920 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/2021, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.630 mm, prostornina tovornega prostora: 46 m³, vzmetenje: zrak, velikost pnevmatike: 245/70R17,5 143J, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245/70R17,5 143J, velikost zadnje pnevmatike: 245/70R17,5 143J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, dvižna zadnja plošča, zavorni sistem na stisnjen zrak, Load capacity 1,500 kg, 4-cylinder engine, aluminium platform 1,800 mm long, 2 anti-roll guards, supplied with batteries and charging cable, front with portal doors for through-loading with short drive-over plate, 14 lashing eyes. -- Errors, omissions and changes excepted, sample images used. More data at: !, More Details: ! Fjdjy Rlfgopfx Al Hogb

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 8.920 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.110 mm, širina tovornega prostora: 2.430 mm, vzmetenje: jeklo, velikost pnevmatike: 245/70 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245/70 R 17,5, velikost zadnje pnevmatike: 245/70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Drei-Seiten-Kipper, Ladehöhe ca. 940 mm, Stirnwand klappbar zum Überladen, Zentralverriegelung für seitliche und hintere Bordwände, automatische Rückwandöffnung beim Rückwärtskippen, seitliche Bordwände mit Federentlastung, Brückenboden aus 4 mm Feinkornstahl, 8 x starke Zurrösen im Boden versenkt, 5-stufiger hartverchromter Dreiseiten-Kippzylinder, Kippwinkel: hinten 50 Grad, seitlich 45 Grad, stufenlos höhenverstellbares Zugrohr, Rungen hinten steckbar, Getriebestützwinde (Last- und Schnellgang) vorn, Aufnahmeschacht für zwei Aluminium-Auffahrrampen im Fahrgestell integriert, abschließbarer Rampenschacht (Sichtschutz), Konturmarkierung nach ECE R 048 Vorschrift, Fahrzeug mit Tageszulassung. Druckfehler, Irrtümer und Änderungen vorbehalten, Muster-Bilder. Mehr Daten unter: !, More Details: ! Fgodpfx Aloy Rldpo Hob

Stanje: novo, lastna masa: 3.650 kg, največja dovoljena obremenitev: 6.850 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.250 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.420 mm, prostornina tovornega prostora: 37 m³, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245/70 R 17,5, velikost zadnje pnevmatike: 245/70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, dvižna zadnja plošča, zavorni sistem na stisnjen zrak, Tail lift Dautel DL 1500, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off locks, with dedicated batteries and charging cable, side wall thickness approx. 17 mm, front with portal doors for through-loading with short drive-over plate, 2 rows of combination lashing rails, 6 pairs of recessed lashing rings in the floor, rental price from €720 per month. -- Subject to typographical errors, mistakes, and changes, sample images -- More data at: !, More details: ! Fgedpfey N Rygex Al Hjb

Stanje: novo, lastna masa: 2.850 kg, največja dovoljena obremenitev: 7.650 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.580 mm, prostornina tovornega prostora: 38 m³, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245/70 R 17,5, velikost zadnje pnevmatike: 245/70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, 2 x combination lashing rails (row type), 6 pairs of lashing rings in the floor, load securing according to EN 12642 Code XL, 1 x interior light, side wall and front wall thickness approx. 17 mm each, rental price from €580 per month. -- Subject to typing errors, mistakes, and changes; sample images -- More data at: !, More details: ! Fsdoy N Rxiopfx Al Hogb

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 8.920 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.110 mm, širina tovornega prostora: 2.430 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Drei-Seiten-Kipper, Ladehöhe ca. 940 mm, Stirnwand klappbar zum Überladen, Zentralverriegelung für seitliche und hintere Bordwände, automatische Rückwandöffnung beim Rückwärtskippen, Seitenbordwände pendelnd und abklappbar, seitliche Bordwände mit Federentlastung, Brückenboden aus Feinkornstahl 4 mm, 8 starke Zurrösen im Boden versenkt, 5-stufiger hartverchromter Dreiseiten-Kippzylinder, Kippwinkel: nach hinten 50 Grad, seitlich 45 Grad, stufenlos höhenverstellbares Zugrohr, Rungen hinten steckbar, Getriebestützwinde mit Last- und Schnellgang vorne, Aufnahmeschacht für zwei Aluminium-Auffahrrampen im Fahrgestell integriert, abschließbarer Rampenschacht (Sichtschutz), Konturmarkierung nach ECE R 048 Vorschrift, Fahrzeug mit Tageszulassung. Druckfehler, Irrtümer und Änderungen vorbehalten, Musterbilder. Mehr Daten unter: !, More Details: ! Fgedpfoy N Rw Esx Al Hsb