Hapert 3 Seitenkipper, 335X180Cm|Neu + Auffahrpaket nakup rabljenega (38.139)

Stanje: rabljeno, prevoženi kilometri: 305.229 km, moč: 323 kW (439,16 KM), prva registracija: 08/2013, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 08/2026, barva: rdeča, vrsta prenosa: mehanski, emisijski razred: Euro 5, prostornina tovornega prostora: 9 m³, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 840 mm, Oprema: ABS, klimatska naprava, navigacijski sistem, pogon na vsa štiri kolesa, * 7785 – Vehicle ID for telephone inquiries * All-wheel drive 6x6 * ABS, 6-speed manual transmission with splitter, all-wheel drive, transfer case, engine brake, differential locks, cruise control, multifunction steering wheel, air conditioning, radio CD / navigation / Bluetooth, heated comfort seat, rear window, roof hatch, sun visor, revolving beacon, high-mounted exhaust, tool box, AdBlue, towing jaw Ø 50 mm, hydraulic connections for trailer, foldable underrun guard, leaf suspension * Dautel 3-way tipper, Bordmatik left side, roll tarp * Tyres 1st axle: 385/65R22.5 ( 7 / 6 mm ) * Tyres 2nd axle: 315/80R22.5 ( 8 / 8 / 7 / 9 mm ) * Tyres 3rd axle: 315/80R22.5 ( 4 / 6 / 10 / 10 mm ) * Technically permissible gross train weight: 60,000 kg * Repairs carried out 04/2025 (invoice available): transfer case replaced, clutch and flywheel renewed ----Our email address:     Our service for you:       - Procurement of short-term or export license plates       - Transit / delivery EU-wide       - Customs clearance of vehicles to third countries Dodpfx Aeyixmysl Heut If you have questions in Russian, you can call the following number * WhatsApp just for Russian speakers: * WhatsApp for English, German and other languages:

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11t Gigant axles * Parabolic springs, mechanical axle compensation at the rear * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front: closed plastic mudguards; Rear: straight, galvanized sheet steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Tool box made of galvanized sheet steel, powder-coated black, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box within the turntable platform * Multi-voltage wiring * LED tail lights * Rear warning beacon (detachable) * Drawbar with 50 mm draw eye and height adjustment via tension spring & turnbuckle * 15-pin electrical socket * Four stake pockets per side (stakes not included), also usable as lash points * Load securing package comprising: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 6 pairs of UVV-certified lashing rings, swiveling and retractable, loadable in all directions, recessed into the outer frame; corner rings: 13.4 t, other rings: 10 t * 6 pairs of mechanical folding extensions for 3 m total width (not at the rear slope) * Widening boards stored at the center of the load floor Duodpsl Th I Aofx Al Het * One-piece, hot-dip galvanized hydraulic access ramps (approx. 3,000 x 720 mm), manually adjustable sideways * 4-way valve block for hydraulic side ramp retrofit * Platform above turntable: approx. 1,960 x 2,520 mm * Unladen platform height: approx. 1,070 mm * Rear platform: approx. 6,500 x 2,520 mm * Unladen platform height: approx. 910 mm (incl. 860 mm drive-on angle) * Chassis, turntable, drawbar, and access ramps hot-dip galvanized * Axles, springs, air tanks, and related components painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Permissible total technical weight: 30,000 kg * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 11/2026

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical rear axle equalization * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour marking tape on the sides and rear * Tool box made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle * 15-pin electrical plug * Four stake pockets on each side (no stakes included), with integrated lashing option * Load securing package consisting of: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t. * 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope) * Widening boards stored in the center of the loading area Dedpfxol Th Nne Al Hsut * Hot-dip galvanized one-piece hydraulic ramp (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-section control valve block for retrofitting hydraulic side ramp shifting * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technical gross vehicle weight of up to 30,000 kg possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 11/2026

Stanje: kot nova (razstavni stroj), lastna masa: 1.040 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.500 kg, Leto izdelave: 2023, Buy online at trailer-shop.de At ANHÄNGERWIRTZ, many models available online Convenient and round-the-clock online shopping 24/7 Pick up yourself or have it delivered. The online pickup marketplace for your new trailer offers top brand manufacturers! Over 850 new trailers in stock Over 130 used trailers constantly available. Non-binding example: direct price, VAT deductible BJT T TRANSPORTER 231 550X224CM GREY TRIDEM ALLOY WHEELS LOADING RAMPS 180CM (XXL) 3500KG Dedpfoyhwwhjx Al Hjut Vehicle transporter T 231 550x224cm 3500kg Tridem high loader with ALKO Bradley lowered frame V-chassis, 10" wheels 195/55R10 lightweight alloy rims silverblack, perforated multiplex front intermediate floor, rear sloped, front side railing removable, sideline grey, rear ramp 180cm, lockable tool box underfloor, jockey wheel, lockable coupling... Only while stocks last! Sales – Telephone order acceptance during the following times: MON - FRI 08:00 - 12:30 & 14:00 - 18:00 Or around the clock via our online shop at trailer-shop.de Copyright - Trademark protection 02/26 231-5522-35-3-10A Image may differ

Stanje: novo, največja dovoljena obremenitev: 2.550 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 400 mm, KP3532 3-Way Tipper Trailer with Electric and Manual Pump * Trailer Type: KP3532 3-Way Tipper with Electric and Manual Pump * Gross Vehicle Weight: 3,500 kg * Payload: 2,550 kg * Internal Dimensions: L: 314 cm, W: 175 cm, H: 40 cm * Loading Height: Approx. 79 cm * Floor: Fully steel sheeted * Lashing points recessed in the frame and mounted externally on the frame * Drop sides: Aluminium * Chassis: Hot-dip galvanized by immersion * Tyres: 13 inch * Axle Manufacturer: AL-KO or KNOTT * Number of Axles: 2 * Braked axle * Jockey wheel as standard: automatic * Overrun and wheel brake: AL-KO * Ball head coupling * Pump: Electric and manual pump * Side board locks: Steel Duedpfx Asthl Szel Hjt Vehicle Registration Document surcharge: €39.00 All prices incl. VAT. Delivery: Delivery by carrier possible, €1.50 per transport kilometre (one-way) within Germany (Seesen to destination), minimum charge €270.00 plus VAT. Visit us also at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. You can also obtain your desired trailer and accessories in consultation with us at: B L Y S S transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: B L Y S S transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel.: =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. FINANCING OR LEASING AVAILABLE Illustrations may differ from standard equipment; specification subject to technical modifications (e.g. tyre sizes).

Stanje: novo, največja dovoljena obremenitev: 33.440 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.900 mm, skupna širina: 2.550 mm, skupna višina: 3.900 mm, Oprema: ABS, SCHWARZMÜLLER 3-Axle Timber/Stake Semi-Trailer - New Vehicle IMMEDIATE AVAILABILITY!! Tractor Unit Data and Equipment - 4,500 mm maximum distance from tractor unit front edge to king pin center - 2,240 mm minimum clear front space from king pin center - 1,900 mm max. rear swing radius - GCVW (Gross Combination Weight, permitted): 44 t for short and long haul, or with special permit - GVW (Technical): 39 t - Axle group load (technical): 27 t - King pin load (technical): 12 t Dimensions - Frame length: approx. 13,000 mm - Overall width: max. 2,550 mm - Loading height front/rear: approx. 1,340 mm - Trailer in level position at approx. 1,150 mm coupling height - Overall loading height: approx. 1,510 mm Construction - Welded steel frame construction - Lightweight high-strength fine-grain steel chassis - Straight frame design, all stanchion holders mounted on the chassis - Frame height at front: approx. 190 mm (without stanchion holders) - Replaceable 2" king pin - Chassis for coupling height (unloaded) approx. 1,150 to 1,250 mm with air suspension tractor unit - 12 mm phenolic plywood decking between longitudinal beams, bolted, extended to front up to landing legs (protects tractor) and at rear above running gear, flush with top edge of crossmembers - Landing legs, 2 x 12 t, single-side operation (right), force equalization - Reinforced crossbeam for loading/unloading while uncoupled Axle and Suspension - 3x SAF Intradisc Plus Integral axles, disc brakes Ø430 mm (22.5"), 9 t/axle load, reinforced axle bodies, off-road version - Axle spacing: 1,310 + 1,410 mm - Axle lift on 1st axle, automatically raises/lowers dependent on load, with forced lowering and speed-limited start-up assistance (operated via cab button and brake pedal sequence) - 6 x 385/65 R 22.5, 164K steel rims 11.75 x 22.5, ET120 mm, silver Braking System - Brake system as per EC directives 71/320 or ECE R13 - Dual-circuit air brake system as per factory specification - EBS system 2S/2M, one axle sensed Duedpfx Alsn Hrg Rj Het - RSS (Roll Stability Support) - Spring-loaded parking brake on 2 axles - Aluminum air tanks - Brake/air connections with 2 individual coupling heads (yellow/red) - EBS/ABS socket at front Air Suspension - Air suspension with raise/lower function - Automatic level set to programmed drive height above 15 km/h - Air bag diameter 360 mm Telematics - SWIT Schwarzmüller Intelligent Telematics, "LOCAL TRAC" package - Axle load display via EBS CAN bus signal, information shown on cab display Superstructure - Extra-strong steel headboard, approx. 2,500 mm high, with 2 strong central supports, top corners chamfered approx. 300 mm/45° - Stanchion holders mounted/adjustable, spacing: approx. 600 mm, then every 2,400 mm - 6 ExTe stanchion holders type 144, bolted clamp fitting - Stanchion tilt approx. 0.8° inward (suitable for sawn timber transport) - 6 pairs ExTe stanchions 144-S with bolted fitting, telescopic (2-piece), max. load per pair 7 t, coated in original signal orange - Telescopic key for stanchion operation - Stanchion load height: max. approx. 2,800 mm - 8 claw guard plates, approx. 200 mm long, fitted between stanchion holders (side) - 6 pairs lashing hooks on stanchion holders Lighting - 24V lighting system as per EC directive 76/756/EEC - 2 full LED five-chamber tail lights "Aspöck" with integrated control unit - 2 LED front position lights - 2 rear LED marker lights - Flashing LED side marker lights, activated via indicator signal - 2 license plate lights - 2 x 7-pi

Stanje: novo, lastna masa: 850 kg, največja dovoljena obremenitev: 1.840 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Side Tipper HTK Alu 2700.31 Permissible total weight: 2700 kg Dedjrvgtvjpfx Al Heut Payload: 1850 kg Unladen weight: 850 kg Body dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 745 mm Loading platform hydraulically tiltable via hand pump Tipping angle: rear 42°, side 50° - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized (immersion bath) - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight with additional electric pump - 13-pin plug and reversing light - Sidewalls made of powder-coated, galvanized steel, completely removable - Rear flap with swinging function - 6 lashing rings mounted on platform floor, each with 800 kg lashing capacity, Dekra tested - Support wheel - Slot for aluminium ramps pre-installed for easy retrofitting Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large selection of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit (transfer) licence plate. We repair trailers of all makes. Additional accessories on request. Technical changes, price changes, and errors excepted. No liability for errors or misprints. Features: automatic reverse function, rubber-sprung axle, independent suspension, tiltable loading platform, support wheel, marker lights, galvanized steel sidewalls, braked, incl. warranty, V-drawbar hot-dip galvanized, chassis and tipping bridge hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump–from 3000 kg permissible total weight with electric pump, 13-pin plug and reversing light, sidewalls powder-coated and fully removable, swinging rear flap, 6 lashing rings with 800 kg capacity each (Dekra certified), slot for aluminium ramps pre-installed for easy retrofitting.

Stanje: novo, lastna masa: 870 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Gross Vehicle Weight: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Internal Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 750 mm Load platform hydraulically tip-able with hand pump and electric pump Tipping angle rear 42°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made from one-piece steel - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible gross weight also with electric pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear panel pendulum-type - 6 lashing rings mounted on bed, 800 kg tensile force each, Dekra certified - Jockey wheel - Stake pocket prepared for retrofitting aluminium ramps Price includes vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun On request, we offer a free temporary registration plate. We repair trailers from all manufacturers. Further accessories available on request. Technical modifications, price changes, and errors excepted. No liability is accepted for errors or typographical mistakes. Duedpfx Ajrq Ew Tel Hjt Features: auto-reverse braking, rubber suspension axle, independent wheel suspension, tipper platform, jockey wheel, marker lights, hot-dip galvanized chassis and tipper body, braked, includes warranty, V-drawbar hot-dip galvanized, one-piece steel tipper body, 4-stage hard-chromed tipper cylinder, hand pump, electric pump from 3,000 kg permissible gross weight, 13-pin plug and reversing lights, 350 mm high fully removable aluminium drop sides, pendulum-type rear panel, 6 lashing rings on bed (800 kg tensile force each, Dekra certified), ramp pocket for easy retrofitting of aluminium ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.460 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Permissible Total Weight: 3500 kg Payload: 2315 kg Unladen Weight: 1185 kg Body Dimensions: 4100 x 2100 x 350 mm Tyres: 13 inch Loading Height: 760 mm Load Platform hydraulically tiltable with hand pump and electric pump Tipping Angle rear 45°, lateral 45° with 350 mm aluminium drop-side extension - V-drawbar, hot-dip galvanized - Chassis and tipper platform, hot-dip galvanized - Tipping platform made of steel, pressed from a single piece Dsdsflw Sbspfx Al Hjut - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg total weight electric pump with hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear tailgate, swinging - 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified - Jockey wheel - Plank box prepared for easy retrofit of aluminium planks Price incl. vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical alterations, price changes, and errors excepted. No liability for errors or misprints. Automatic reversing system, rubber suspension axle, independent suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipper platform hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipping platform made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg total weight electric pump with hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, swinging rear tailgate, 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified, plank box prepared for easy retrofit of aluminium planks.

Stanje: novo, lastna masa: 1.140 kg, največja dovoljena obremenitev: 2.360 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.240 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Gross Vehicle Weight: 3,500 kg Axles: Tridem Payload: 2,360 kg Unladen Weight: 1,140 kg Body Dimension: 4,100 x 2,100 x 350 mm Tyres: 13 inch Loading Height: 750 mm Load area hydraulically tiltable with hand pump and electric pump Tipping angle rear 45°, side 45° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made from single-piece steel - 4-stage hard-chrome-plated tipping cylinder - Hand pump, from 3,000 kg gross weight with additional electric pump Dodped T Svtofx Al Hjut - 13-pin plug and reverse lights - Drop sides made of aluminium, 350 mm high, fully removable - Rear flap is swing-type - Eight lashing rings fitted on the platform, each with 800 kg load capacity, Dekra-tested - Jockey wheel - Ramp tray prepped for easy retrofit of aluminium ramps Price includes vehicle registration document (part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request we can provide a free transfer number plate. We repair trailers from all manufacturers. Additional accessories on request. Subject to technical modifications, price changes, and errors. No liability for typing or printing errors. Reverse automatic, rubber suspension axle, independent suspension, tiltable load area, jockey wheel, marker lights, hot-dip galvanized chassis and tipper platform, braked, incl. warranty, V-drawbar, hot-dip galvanized, tipper platform made from single-piece steel, 4-stage hard-chrome-plated tipping cylinder, hand pump, from 3,000 kg gross weight with electric pump and hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm, fully removable, swing-type rear flap, 8 lashing rings on the platform, 800 kg per lashing ring, Dekra tested, ramp tray prepped for easy retrofit of aluminium ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.240 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: HTK Alu 3500.41 3-Way Tipper Gross Vehicle Weight: 3,500 kg Payload: 2,315 kg Unladen Weight: 1,185 kg Bed Dimensions: 4,100 x 2,100 x 350 mm Tyres: 13-inch Loading Height: 760 mm Load bed hydraulically tiltable with hand pump and electric pump Tipping angle: rear 45°, lateral 45° - V-drawbar, fully hot-dip galvanized - Chassis and tipper platform fully hot-dip galvanized via immersion bath - One-piece steel tipper platform - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible total weight with additional electric pump Dodpfxsri Tawj Al Hjut - 13-pin connector and reversing lights - 350 mm high aluminium drop sides, fully removable - Rear flap can swing - 8 lashing rings mounted on the platform floor, each with a pulling force of 800 kg, Dekra-tested - Jockey wheel - Plank box pre-installed for easy retrofitting of aluminium ramps Price includes vehicle registration document (registration certificate part II and COC papers). We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide free transfer plates. We repair trailers of all manufacturers. Additional accessories available on request. Technical and price changes as well as errors excepted. No liability for errors or misprints. Features: auto-reverse braking system, rubber-sprung axle, independent suspension, tiltable load area, jockey wheel, marker lights, fully hot-dip galvanized chassis and tipper platform, braked, incl. warranty, V-drawbar fully hot-dip galvanized, one-piece steel tipper platform, 4-stage hard-chromed tipping cylinder, hand pump, additional electric pump from 3,000 kg GVW, 13-pin plug and reversing lights, 350 mm high fully removable aluminium drop sides, rear swing flap, 8 lashing rings mounted on the platform floor, pulling force 800 kg per ring, Dekra-certified, plank box pre-installed for easy retrofitting of aluminium ramps.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 740 mm Dsdpsrazlkofx Al Heut Load platform hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, side: 50° With leaf mesh extension/steel mesh extension 600 mm high, swinging on all 4 sides - V-drawbar hot-dip galvanised - Chassis and tipping platform hot-dip galvanised by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; electric pump with hand pump from 3,000 kg gross weight - 13-pin connector and reversing lights - Side panels made of aluminium, 350 mm high, fully removable - Rear gate, pendulum mounted - 6 lashing rings fitted on platform floor, each ring tested by Dekra for a load capacity of 800 kg - Jockey wheel - Channel for ramps, pre-installed for easy retrofitting of aluminium ramps Price includes vehicle registration documents (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a complimentary transit/temporary licence plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical modifications, price changes and errors excepted. No liability assumed for errors or misprints. Automatic reversing mechanism, rubber spring axle, independent wheel suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipping platform hot-dip galvanised by immersion, braked, includes warranty, V-drawbar hot-dip galvanised by immersion, one-piece steel construction tipping platform, 4-stage hard-chromed tipping cylinder, hand pump, electric pump with hand pump from 3,000 kg gross weight, 13-pin connector and reversing light, aluminium side panels 350 mm high, fully removable, rear gate pendulum mounted, 6 lashing rings on the platform floor (Dekra certified, 800 kg per ring), ramp channel pre-installed for easy retrofitting with aluminium ramps.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 1.335 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.220 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2000.27 Permissible Total Weight: 2,000 kg Payload: 1,335 kg Unladen Weight: 665 kg Body Dimensions: 2,670 x 1,500 x 350 mm Tyres: 13 inch Loading Height: 750 mm Load Area hydraulically tiltable with hand pump Tipping angle: rear 45°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder Djdpfx Asgi Sr Sel Hout - Hand pump; from 3,000 kg total weight, electric pump with hand pump - 13-pin connector and reversing lights - Drop sides made from powder-coated, galvanized sheet steel, fully removable - Rear flap with swing function - 6 tie-down rings mounted on bed floor, load capacity 800 kg per ring, DEKRA certified - Jockey wheel - Channel as preparation for aluminium ramps for easy retrofitting Price includes vehicle registration document (Part II registration certificate and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we provide a free transit license plate. We repair trailers of all makes. Additional accessories on request. Technical modifications, price changes, and errors reserved. No liability is assumed for errors or misprints. Reverse-automatic, rubber-sprung axle, independent suspension, tiltable load area, jockey wheel, marker lights, galvanized steel sheet, braked, incl. warranty, V-drawbar hot-dip galvanized, chassis and tipping bridge hot-dip galvanized by immersion, tipping bridge made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg total weight electric pump with hand pump, 13-pin connector and reversing lights, powder-coated, fully removable drop sides, rear flap with swing function, 6 tie-down rings mounted on the bed floor, load capacity 800 kg per ring, DEKRA certified, ramp channel prepared for easy retrofitting with aluminum ramps.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Permissible Gross Weight: 3,500 kg Payload: 2,512 kg Unladen Weight: 988 kg Body Dimensions: 3,140 x 1,750 x 350 mm Tyre Size: 13 inch Loading Height: 740 mm Loading platform can be hydraulically tipped with hand pump and electric pump Tipping angle: rear 42°, side 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping bridge, fully hot-dip galvanized by immersion - Tipping bridge made of one-piece steel - 4-stage hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights Dodpovtf I Uefx Al Hout - Aluminum side walls, 350 mm high, fully removable - Rear flap is swing- and drop-type - 6 lashing rings mounted on the platform floor, tensile force 800 kg per ring, Dekra approved - Jockey wheel - Shaft for installing aluminum ramps, pre-equipped for easy retrofitting - Black side walls Price includes vehicle documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following brands: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. A free transfer license plate is available upon request. We repair trailers from all manufacturers. Additional accessories available on request. Technical specifications, prices and availability subject to change. No liability for errors or misprints. Features: automatic reverse, rubber suspension axle, independent wheel suspension, tiltable loading platform, jockey wheel, marker lights, chassis and tipping bridge hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipping bridge made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminum side walls, fully removable, swing-type rear flap, 6 lashing rings on the platform floor (800 kg tensile force each, Dekra approved), shaft pre-installed for retrofitting aluminum ramps, black side walls.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 2.025 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 2700.27 Gross Vehicle Weight: 2700 kg Payload: 2025 kg Unladen Weight: 675 kg Internal Dimensions: 2670 x 1500 x 350 mm Tyres: 13 inch Loading Height: 725 mm Load bed hydraulically tiltable with hand pump Tipping angle: rear 45°, lateral 50° - V-drawbar, hot-dip galvanized - Chassis and tipping frame, hot-dip galvanized - Tipping platform made of one-piece steel - 4-stage hard-chromed tipping cylinder Dedjri Tbxjpfx Al Hout - Hand pump; for permissible total weight from 3000 kg electric pump with hand pump - 13-pin connector and reversing lights - Drop sides made of powder-coated, galvanized steel plate, completely removable - Rear tailgate with swing function - 6 lashing rings mounted on platform floor, rated for 800 kg per ring, Dekra certified - Jockey wheel - Boarding plank compartment pre-installed for retrofitting aluminium planks Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, you will receive a free temporary registration plate from us. We repair trailers from all manufacturers. Additional accessories upon request. Subject to technical modifications, price changes, and errors. No liability for errors or misprints. Features: Automatic reverse, rubber suspension axle, independent wheel suspension, tilting load area, jockey wheel, marker lights, galvanized steel plate, braked, includes warranty, hot-dip galvanized V-drawbar, hot-dip galvanized chassis and tipping frame, one-piece steel tipping platform, 4-stage hard-chromed tipping cylinder, hand pump (from 3000 kg permissible total weight: electric pump with hand pump), 13-pin connector and reversing lights, powder-coated drop sides, fully removable, rear tailgate with swing function, 6 lashing rings mounted on floor rated at 800 kg each, Dekra certified, boarding plank compartment prepared for easy retrofitting of aluminium boarding planks.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 2.025 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 2700.27 Permissible total weight: 2700 kg Payload: 2025 kg Unladen weight: 675 kg Bed dimensions: 2670 x 1500 x 350 mm Tyres: 13-inch Loading height: 725 mm Load platform hydraulically tipable via manual pump Tipping angle: rear 45°, sides 50° Djdpfxjri Tb Aj Al Hsut - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made of one-piece steel - 4-stage hard-chrome tipping cylinder - Electric pump with emergency hand pump - 13-pin connector and reversing lights - Side panels made of powder-coated, galvanized steel, fully removable - Rear tailgate can be swung - 6 lashing rings mounted on the bed, each with 800 kg load capacity, Dekra certified - Jockey wheel - Lashing trough preinstalled for optional aluminum floor inserts – easy to retrofit Price includes vehicle registration documents (registration certificate Part II and COC papers). We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. You can request a free temporary number plate for transport. We repair trailers of all makes. Additional accessories available on request. Technical modifications, price changes, and errors excepted. We accept no responsibility for mistakes or typographical errors. Features: reversing automatic brake, rubber suspension axle, independent wheel suspension, tipper bed, jockey wheel, marker lights, galvanized steel panels, braked, includes warranty, V-drawbar hot-dip galvanized, chassis and tipper platform hot-dip galvanized, single piece steel tipper platform, 4-stage hard-chrome tipping cylinder, manual pump, from 3000 kg permissible total weight with electric pump and manual pump, 13-pin plug and reversing lights, powder-coated fully removable side panels, swing rear tailgate, 6 lashing rings mounted in bed rated to 800 kg each (Dekra certified), preinstalled trough for easy retrofitting of aluminum floor inserts.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.500 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,7 m³, barva: drugo, gradbena višina: 1.210 mm, delovna širina: 2.003 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 3500.37 Permissible gross weight: 3,500 kg Payload: 2,500 kg Unladen weight: 1,000 kg Load bed dimensions: 3,630 x 1,850 x 350 mm Tyres: 13 inch Loading height: 740 mm Load platform hydraulically tipppable with manual pump and electric pump Tipping angle rear 42°, side 50° - V-drawbar, fully hot-dip galvanized - Chassis and tipping platforms, fully hot-dip galvanized - One-piece steel tipping platform - 4-stage hard chrome tipping cylinder - Manual pump, and from 3,000 kg permissible gross weight onwards, electric pump with manual pump - 13-pin plug and reversing lights - Aluminium side boards, 350 mm high, fully removable - Swinging rear gate - 8 lashing rings on the bed, pull force 800 kg per ring, Dekra-certified - Support wheel - Plank compartment prepared for aluminium planks for easy retrofitting Price includes vehicle registration certificate (Certificate of Registration Part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, you will receive a free temporary license plate. We repair trailers of all makes. Further accessories on request. Technical modifications, price changes, and errors reserved. No liability is assumed for errors or misprints. Features: automatic reverse, rubber suspension axle, independent suspension, tilting load platform, support wheel, position lights, hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, one-piece steel tipping bridge, 4-stage hard chrome tipping cylinder, manual pump, from 3,000 kg permissible gross weight electric pump with manual pump, 13-pin plug and reversing lights, aluminium sidewalls 350 mm high, fully removable, swing rear gate, 8 lashing rings on the load bed, pulling force 800 kg per ring, Dekra certified, plank compartment prepped for easy retrofitting of aluminium planks. Dujdpfjrq Exbjx Al Hjt

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Dodofbiavspfx Al Hsut Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3500 kg Payload: 2512 kg Unladen Weight: 988 kg Body Dimensions: 3140 x 1750 x 350 mm Tyres: 195 50 R13C Loading Height: 740 mm Load Platform hydraulically tiltable via hand pump and electric pump Tipping Angle: rear 42°, lateral 50° With 600 mm high steel side extension panels, pendulum-mounted on all four sides - V-drawbar, hot-dip galvanized immersion - Chassis and tipper frame hot-dip galvanized immersion - Tipper body made from steel, single-piece construction - 4-stage hard-chromed tipping cylinder - Hand pump, electric pump from 3000 kg GVW up, combined with hand pump - 13-pin connector and reversing lights - Removable aluminium side walls, 350 mm high, completely detachable - Rear tailgate pendulum-mounted - 6 lashing rings mounted on the bed, tensile force 800 kg per ring, Dekra certified - Support wheel - Plank compartment pre-installed for easy retrofitting with aluminium planks Price includes vehicle documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit license plate. We repair trailers of all manufacturers. Additional accessories available upon request. Technical modifications, price changes, and errors excepted. No liability for mistakes or typographical errors. Reversing automatic, rubber-sprung axle, independent suspension, tiltable load platform, support wheel, clearance lights, chassis and tipper frame hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipper body single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg GVW up electric pump with hand pump, 13-pin plug and reversing lights, removable aluminium sidewalls 350 mm high, rear tailgate pendulum-mounted, 6 lashing rings mounted on the platform floor, tensile strength 800 kg per ring, Dekra certified, plank compartment as preparation for easy retrofitting with aluminium planks.

Stanje: novo, lastna masa: 988 kg, največja dovoljena obremenitev: 2.512 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Permissible Gross Weight: 3,500 kg Duederazk Uopfx Al Hst Payload: 2,512 kg Unladen Weight: 988 kg Box Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tipping angle: rear 42°, side 50° Key Features: - V-drawbar, hot-dip galvanised - Chassis and tipping bridge hot-dip galvanised - Tipping bridge made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible gross weight with electric pump and hand pump - 13-pin plug and reversing lights - Side walls made from 350 mm high aluminium, completely removable - Rear tailgate can swing - 6 lashing rings mounted on the platform floor, each with 800 kg pull force, Dekra certified - Support wheel - Channel prepared for easy retrofit of aluminium loading ramps Price includes vehicle registration document (Registration Certificate Part II and COC papers) We have a large selection of trailers in stock from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price adjustments, and errors excepted. No liability for errors or misprints. Features: Reverse automatic brake, rubber suspension axle, independent wheel suspension, tiltable loading platform, support wheel, marker lights, chassis and tipper platform hot-dip galvanised, braked, including warranty, V-drawbar hot-dip galvanised, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg gross weight with electric pump and hand pump, 13-pin plug and reversing lights, 350 mm high aluminium drop sides, completely removable, swinging rear gate, 6 lashing rings on floor (800 kg pull each, Dekra tested), ramp channel for easy retrofit of aluminium ramps.

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tyres: 13 inch Loading height: 750 mm Loading platform hydraulically tiltable, operated by hand pump and electric pump Tipping angle: rear 42°, sides 50° With leaf mesh or steel mesh extension 600 mm high, foldable on all four sides - V-drawbar, hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg permissible total weight also with electric pump plus hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear flap is pendulum-mounted - 6 lashing rings mounted on the bed, tensile load 800 kg per ring, DEKRA certified - Support wheel - Ramp compartment pre-installed for easy retrofitting with aluminum ramps Price includes vehicle title (Vehicle Registration Certificate Part II and COC papers). Djdektm Suspfx Al Hsut We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transfer license plate. We repair trailers of all makes. Further accessories available on request. Technical changes, price updates, and errors reserved. No liability for misprints or mistakes. Features: reversing automatic brake, rubber torsion axle, independent suspension, tiltable loading platform, support wheel, position lights, chassis and tipping bridge hot-dip galvanized by immersion, braked, incl. warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg permissible total weight also electric pump plus hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, pendulum-mounted rear flap, 6 lashing rings on the bed, tensile load 800 kg per ring, DEKRA certified, ramp compartment pre-installed for easy retrofitting with aluminum ramps.

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.100 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.630 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,7 m³, barva: drugo, gradbena višina: 1.251 mm, delovna širina: 2.022 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.37 Permissible Gross Weight: 3000 kg Payload: 2100 kg Unladen Weight: 900 kg Body Dimensions: 3630 x 1850 x 350 mm Tyres: 13 inch Loading Height: 740 mm Dusdsl Dqldepfx Al Hst Loading platform hydraulically tiltable via manual pump and electric pump Tipping angle rear 45°, lateral 45° - V-drawbar, fully hot-dip galvanized - Chassis and tipping platform fully hot-dip galvanized - Tipping bridge made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Manual pump; from 3000 kg gross weight onwards: electric pump with manual backup - 13-pin plug and reversing lights - Aluminum side walls, 350 mm high, fully removable - Rear tailgate can be used as a swinging gate - 8 lashing rings mounted on the bed, tensile force 800 kg per ring, Dekra tested - Jockey wheel - Preparation for aluminum ramps (ramp compartment) for easy retrofitting Price includes registration documents (Certificate of Title Part II and COC papers). We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free transit license plate. We repair trailers from all manufacturers. Additional accessories available on request. Technical changes, price modifications, and errors excepted. No liability for errors or misprints. Features: auto-reverse brakes, rubber suspension axle, independent suspension, tiltable loading platform, jockey wheel, marker lights, fully hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from one-piece steel, 4-stage hard-chromed tipping cylinder, manual pump, from 3000 kg gross weight electric pump with manual backup, 13-pin plug and reversing lights, aluminum side walls 350 mm high, fully removable, rear swinging tailgate, 8 lashing rings mounted to the platform with 800 kg tensile load per ring, Dekra approved, ramp compartment as preparation for retrofitting aluminum ramps.

Stanje: novo, največja dovoljena obremenitev: 2.600 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 5.800 mm, širina tovornega prostora: 2.050 mm, Leto izdelave: 2026, ANHÄNGERWIRTZ, tržište za preuzimanje vaših novih prikolica, nudi jake brendove proizvođača! Preko 850 novih prikolica na lageru Preko 130 polovnih prikolica stalno u ponudi. Neobavezan primer: Akcija dok traju zalihe! Transporter vozila Martz transporter automobila Carkipper 3500 585x209cm 3.500kg Tridem visokoutovarna platforma sa ALKO niskom šasijom, V-ramom, amortizerima, gumama 10", perforisanim voznim šinama u skladu sa VDI 2700, direktno ulazno vozilo sa aluminijumskim međupodom, hidraulično nagibna utovarna platforma, utovarne šine, sajla vitla, automatsko potporni točak, 13-pin utičnica i moderna rasveta.... uklj. Knott sajla vitla uklj. podvozje za 100 km/h sa amortizerima uklj. nagibna hidraulika Dsdpex Dk Spofx Al Hjut Novi, profesionalni transporter vozila, odmah spreman za preuzimanje po povoljnoj ceni direktno nakon porudžbine. Novo vozilo, račun sa iskazanim PDV-om, garancija od specijalizovanog trgovca sa 35 godina iskustva 01.2026 MA-ML3OVP.350.580.200.0309KV0ED9EGK5

Stanje: novo, največja dovoljena obremenitev: 2.270 kg, skupna masa: 3.000 kg, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.050 mm, Leto izdelave: 2026, ANHÄNGERWIRTZ, tržište za preuzimanje vaših novih prikolica, nudi jake brendove proizvođača! Preko 850 novih prikolica na lageru Preko 130 polovnih prikolica stalno u ponudi. Neobavezan primer: Akcija dok traju zalihe! Transporter vozila Martz transporter automobila Carkipper 3500 585x209cm 3.500kg Tridem visokoutovarna platforma sa ALKO niskom šasijom, V-ramom, amortizerima, gumama 10", perforisanim voznim šinama u skladu sa VDI 2700, direktno ulazno vozilo sa aluminijumskim međupodom, hidraulično nagibna utovarna platforma, utovarne šine, sajla vitla, automatsko potporni točak, 13-pin utičnica i moderna rasveta.... uklj. Knott sajla vitla uklj. podvozje za 100 km/h sa amortizerima uklj. nagibna hidraulika Novi, profesionalni transporter vozila, odmah spreman za preuzimanje po povoljnoj ceni direktno nakon porudžbine. Novo vozilo, račun sa iskazanim PDV-om, garancija od specijalizovanog trgovca sa 35 godina iskustva Dusdpfx Ajyfhqtjl Hjt 01.2026 MA-ML3OVP.350.580.200.0309KV0ED9EGK5

Stanje: rabljeno, prevoženi kilometri: 284.499 km, vrsta goriva: dizel, medosna razdalja: 2.900 mm, gorivo: dizel, barva: bela, vrsta prenosa: mehanski, število prestav: 4, Leto izdelave: 2005, = Additional options and accessories = - PTO = Remarks = MAN LE 8.150 4x2 Year: 2005. Mileage: 284,499 km. 6-speed manual gearbox. Weight: 4,290 kg. Payload: 3,200 kg. Gross weight: 7,490 kg. Axle load: 1: 3,200 kg. 2: 5,200 kg. 3 persons. Radio. Wheelbase: 2,900 mm. Steel suspension. 3.5-ton trailer coupling. Meiller 3-way tipper. Internal dimensions: L: 3,800 mm. W: 2,300 mm. H: 400 mm. Tyres: 215/75R17.5 70% tread remaining. German Truck! ID No.: 191. The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations from Heinhuis, to all contracts concluded by Heinhuis, and to the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further Information = Year of manufacture: 2005 Unladen weight: 4,290 kg Payload: 3,200 kg Gross vehicle weight: 7,490 kg = Company information = Dodpeyrmv Usfx Al Hjut For more information: WhatsApp:

Stanje: novo, moč: 353 kW (479,95 KM), vrsta goriva: dizel, velikost pnevmatike: 385/65-22,5, konfiguracija osi: 6x4, medosna razdalja: 3.300 mm, gorivo: dizel, kapaciteta rezervoarja za gorivo: 370 l, zavore: retarder, barva: bela, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo, dolžina tovornega prostora: 49.000 mm, širina tovornega prostora: 24.200 mm, višina nakladalnega prostora: 9.000 mm, Leto izdelave: 2025, Oprema: ABS, AdBlue, Bluetooth, EBS (Elektronski zavorni sistem), centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, elektronski program stabilnosti (ESP), filter saj, greljenje sedeža, klimatska naprava, meglenke, navigacijski sistem, računalnik na krovu, retarder, spojka prikolice, tempomat, zapora diferenciala, - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Passenger seat - Bluetooth - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - Air-suspended seats - Air horn - Particulate filter - PTO - Radio/multimedia system - Rotating beacon - Reversing camera - Sliding roof - Seat heating - Sun visor Dsdpfx Aeylvf Ssl Hout - Lane departure warning - Stability control - Windshield Internal reference for customer inquiries: 5-099 Immediately available! In stock! MAN TGS 33.480 6x4 three-way tipper with Meiller Trigenius body "BORDMATIK" Vehicle: * Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque, Euro 6e * MAN TipMatic 12.28 OD, with retarder 35 * MAN TipMatic driving programs: Performance, Efficiency, and Offroad, up to 70,000 kg * 6x4 drive configuration * Leaf/leaf suspension * Differential locks on driven rear axles * 3,300 mm main wheelbase, 1,400 mm wheelbase between rear axles * 370 l fuel tank capacity, 60 l AdBlue tank capacity * Full brake assistant * High-performance engine brake MAN EVBec, multi-stage * Disc brakes on front axle, drum brakes on rear axles * Trailer coupling ROCKINGER Type 500 G 6B * Cab NN: the practical (narrow, medium-length, standard height) * Mechanical roof lift * Driver’s comfort seat, air-suspended, with lumbar support, shoulder adjustment and seat heating * Sunblind for door side windows, interior, mechanical, driver’s side * Cool box * MAN SmartSelect infotainment control with touchpad and direct access buttons * MAN Media System Navigation Advanced 7-inch * MAN Sound System * Navigation maps Europe and Russia * Online traffic service for navigation function Body: Meiller Trigenius D316 three-way tipper body * Dimensions LxWxH: 4,900 mm x 2,420 mm x 900 mm * Front wall 1,100 mm high * Tipper deck floor: steel HBW 450, 5 mm * Load securing with floor and side wall lashing rings * Tipper side wall: left with Bordmatik, right hinged and folding * Access steps on tipper front wall * Tipper tailgate: hinged, automatic claw latch * Control unit for tipper hydraulics in cab, with trailer circuit changeover * Axial pump for tipper hydraulics, MEILLER type 275/1 * Reflective contour markings on tipper bed, white on sides, yellow at rear * and much more. Financing available through our finance partners. For further questions, our sales team is at your service. This is a non-binding offer. Subject to prior sale, errors and changes. General Information Year of manufacture: 2025 Cab type: Local traffic Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Gross vehicle weight: 26,000 kg Axle configuration Suspension: Leaf springs Front axle: Tire size: 385/65-22.5; Steering; Brakes: Disc brakes Rear axle 1: Tire size: 315/80-22.5; Differential lock; Brakes: Drum brakes Rear axle 2: Tire size: 315/80-22.5; Differential lock; Brakes: Drum brakes Functional Body brand: Meiller Trigenius D316 Pump: Yes Condition...