Fliegl Zps180 / Baustoff / Alu-Felgen / 40 Mm nakup rabljenega (30.741)

Stanje: rabljeno, prevoženi kilometri: 273.025 km, moč: 290 kW (394,29 KM), prva registracija: 10/2016, vrsta goriva: dizel, lastna masa: 13.865 kg, največja dovoljena obremenitev: 12.135 kg, skupna masa: 26.000 kg, konfiguracija osi: 6x2, gorivo: dizel, barva: srebrn, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 9.820 mm, dolžina tovornega prostora: 6.433 mm, širina tovornega prostora: 2.506 mm, višina nakladalnega prostora: 950 mm, Leto izdelave: 2016, gradbena višina: 3.500 mm, Oprema: ABS, klimatska naprava, žerjav, The Mercedes-Benz Antos 2540 L is a used flatbed truck equipped with a Palfinger PK15001L crane and a steering axle. The vehicle was first registered in October 2016 and has a mileage of 273,025 km. Powered by a 10,677 cc diesel engine with an output of 290 kW (394 hp), it meets the Euro 6 emissions standard. The vehicle features an automatic transmission and offers seating for two occupants. Bjdpfx Ajm Uxafob Tedc The truck is finished in metallic silver paintwork and comes fitted with aluminium rims. Its dimensions are 9,820 mm in length, 2,550 mm in width, and 3,500 mm in height. The permissible gross vehicle weight is 26,000 kg. Featuring an environmentally friendly green emissions sticker and certified low emissions, this truck is ideally suited for urban operations. Extensively wrapped with advertising foils. Sale exclusively to professional buyers (farmers, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Stanje: novo, največja dovoljena obremenitev: 10.600 kg, skupna masa: 14.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Vehicle / Body: Tandem trailer First registration: New vehicle Gross vehicle weight: 14,000 kg Unladen weight: 3,400 kg Payload: 10,600 kg Overall length: 8,080 mm Loading length: 6,200 mm incl. rear incline Width: 2,550 mm Loading height: 900 mm Additional information plus pre-carriage / provisioning from stock location 26639 Wiesmoor €1,280.00 / net - Platform width approx.: 2,480 mm - Drawbar length approx.: 1,750 mm Vehicle consists of Chassis: central axle trailer Fine-grain steel welded construction Outer frame slightly inclined, new design with "Load-Lock profile" for lashing strap anchoring 6 pairs of lashing rings outside in the floor/outer frame, each 5t 3 pairs of lashing rings outside in the floor, each 5t 1 at the front corners, 1 before and 1 in the rear incline at the back Landing leg at the front Foldable rear support Wheel chocks with holder Steel underrun protection Rear spray flaps across total width (not in combination with forklift mounting) Quarter-round mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Central axle trailer coupling gear Drawbar with certified 40 mm drawbar eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & suspension Drum brake axles, manufacturer's choice "Axles & running gear laser aligned" – reduces tyre wear and fuel consumption Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17.5" as per manufacturer Steel wheels in twin arrangement, factory silver Bjdpfx Abjy Dzk Sj Tedc Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to towing vehicle 24 volts EBS, electronic braking system with EBS plug at the front, with connection cable Notice: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connection cable Floor Steel / chequer plate floor for high point load capacity Note: Slight floor rippling possible due to welding distortion! Platform length approx. 6,200 mm Rear incline approx. 900 mm Front bulkhead / corner stanchions 25 mm aluminium hollow profile, 400 mm high Sidewalls 25 mm aluminium hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to the frame and with holder for securing the loading ramps, drive-on width approx. 2,430 mm Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable with handgrip on ramps wooden overlay (tip area steel / chequer plate) gas pressure spring for single-person operation Operating instructions The indicated gross vehicle weight is technically feasible, but depending on cargo, the total weight may not be achievable while complying with the permissible axle, support, and fifth-wheel loads. (Poor driving and trailing behavior may occur due to improper load distribution) Special permit required if maximum train length exceeds 18,750 mm. Country-specific registration regulations must be observed. Country of registration / license plates Country of registration: Germany with Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline pre-installed for single-line license plate holder Conspicuity markings with reflective tape to ECE R 048, white on sides, red at rear Paintwork Frame in DB 7350 Nova grey "10-year warran

Stanje: rabljeno, prva registracija: 09/2016, barva: drugo, Leto izdelave: 2016, Oprema: ABS, = Druge možnosti in oprema = - BPW osi - Dvižna os Bsdpfx Aoy Avafjb Todc - Bobnaste zavore = Opombe = Fliegl, 2016, BPW osi, 1. os dvižna, bobnaste zavore = Podatki o podjetju = Bančni podatki: Račun pri Rabobank: 39.33.10.655 IBAN: NL73RABO0393310655 SWIFT koda: RABONL2U - Pred transakcijo vedno preverite naše bančne podatke! - Vozila ni možno rezervirati brez pologa. - Pridržujemo si pravico do napak pri pisanju in besedilu za vsa ponujena vozila.

Stanje: novo, lastna masa: 245 kg, največja dovoljena obremenitev: 505 kg, skupna masa: 750 kg, dolžina tovornega prostora: 2.400 mm, širina tovornega prostora: 1.740 mm, barva: drugo, gradbena višina: 960 mm, delovna širina: 2.400 mm, Oprema: kabelska vitla, Manufacturer: Lorries Type: Motorcycle Trailer MT-2 Bedpfx Abjw Df Sms Tjdc Permissible total weight: 750 kg Payload: 505 kg Unladen weight: 245 kg Box dimensions: 2400 x 1740 mm Tyres: 13-inch alloy wheels - Suitable for transporting two motorcycles - Galvanised and powder-coated steel frame - Can be folded upright for storage (minimal footprint: 240 x 90 cm) - Lowerable loading platform via winch - 2 x adjustable motorcycle wheel chocks - Low loading angle - 8 lashing eyes - Closed loading floor with aluminium tread plate - Jockey wheel - Approved for 100 km/h Easy loading of a motorcycle or scooter Dimensions when folded: - Height: 260 cm, Width: 240 cm, Depth: 90 cm Price includes COC papers We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun Upon request, we provide free temporary registration plates for transfer. We repair trailers from all manufacturers. Additional accessories available upon request. Technical changes, price variations and errors excepted. We accept no liability for errors or misprints. Features: torsion axle, tiltable loading platform, can be folded upright (very minimal footprint), lowerable loading area via winch, jockey wheel, marker lights, galvanised and powder-coated steel frame, unbraked, including warranty, for the transport of two motorcycles, 2 x adjustable motorcycle wheel chocks, low approach angle, 8 lashing eyes, closed aluminium tread plate floor, approved for 100 km/h.

Stanje: novo, številka stroja/vozila: 06b624786df9f4b5c196a36b0, lastna masa: 3 kg, največja dovoljena obremenitev: 11 kg, skupna masa: 14 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 285 / 70 r 19,5, Further information Chassis Central axle tipping trailer Steel welded construction, continuous tipping shaft at rear with 80 mm ball tipping bearing 2-speed gear support leg at the front Foldable rear support Wheel chocks with holder Steel underride guard Rear splash guards across the full width Quarter shell mudguards Lockable storage compartment for loading ramps beneath the loading area Drawbar device for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker compensation) Wheels and Tires 285 / 70 R 19.5 Manufacturer’s choice Steel rims, factory silver Braking system 2-line air brake system Spring-actuated parking brake 2 interlock-proof coupling heads at the front, with connecting lines to the tractor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrics 24 Volt, multi-chamber lamps, yellow side LED lighting 2 white position lights in front 2 white/red lane marker lights at the rear All lamps in LED version (Note! With certain towing vehicles, diagnostic errors may occur, although functionality is ensured) 1 x 15-pin plug at the front, with connecting cable Bdedpfxoi Ri Ipj Ab Toc Hydraulics Three-way tipping system, hydraulic multi-piston press with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without flow restrictor. If required, this must be retrofitted on the truck. Operation hydraulic via truck PTO Hydraulic connection with SVK plug NW 10/3, including connecting hose Tipper body Sturdy tipping body with 4 mm steel plate floor, steel drop sides, continuous, foldable and pendulum-mounted with central locking at the bottom. Corner stanchions at the rear plug-in. Tailgate foldable and pendulum-mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 bottom hinges. Side wall return springs (not possible with split side walls) Rear wall pendulum-mounted and as 2-wing door (not foldable), with door retainer and side protective rubber Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated 5 t Country of registration / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, white on side and red at rear Paintwork Frame hot-dip galvanized including passivation; 15-year warranty against rust-through Side walls/body RAL 3002, carmine red Note! Body inside only primed! Attention: Archive images!

Stanje: novo, številka stroja/vozila: ee3256d63dd23b3ad1bdf9ab0, lastna masa: 10.280 kg, največja dovoljena obremenitev: 13.720 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support legs 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mud flaps Quarter shell fenders in front of the 1st axle Excavator arm trough above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes rated at 5 t each in the excavator arm trough, positioned laterally on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear taper 1 storage box recessed into the gooseneck on the floor with lid, W=720 mm/ L=520 mm / D=170 mm 1st pair of wheel recesses after the gooseneck, recessed in the low-bed deck area, sloped for entry, length at bottom approx. 1600 mm, approx. 400 mm deep. Note! Main frame section 400 mm higher than wheel recess. 2nd pair of wheel recesses between the axles, recessed in the low-bed deck area, sloped for entry, length at bottom approx. 600 mm, approx. 300 mm deep. Note! Main frame section 300 mm higher than wheel recess. Removable wheel recess covers from the main frame, with wooden inserts. Distance from main frame longitudinal member to outside member approx. 1280 mm (wheel recess area) Extensions extendable to 3,000 mm, foldable at the wheel recess extensions (extensions not in the rear taper nor at the bottom of the wheel recesses) (The track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for timber planks centrally on load area or underneath depending on technical feasibility 70 mm timber planks for extension to 3,000 mm Low-bed lashing points 1 pair of ring lashing points recessed in the gooseneck, each rated at 5 t 8 pairs of lashing mushrooms recessed in the top and side outer frame, each rated at 10 t 2 x at the front on the gooseneck 6 x in the low-bed – first lashing point 250 mm from the front, last maximum 250 mm from the rear, distance between lashing points not greater than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each rated at 5 t (can be converted to stake pockets) Drawbar Assembly for Turntable Trailer Drawbar with tested 50 mm towing eye, towing eye inclined at 8° Axles + Suspension SAF drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Air suspension with lift & lower valve, separately operable at front and rear Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Bdsdpfx Abei Ri I No Toc Steel rims in twin arrangement, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake Trailer info center, displays vehicle data (e.g., axle load—not a calibrated scale) and odometer Axle load detection via EBS-Canbus signal, for display in the cab (truck must be pre-equipped, not installed in truck, not a calibrated scale) Vehicle Stability System Duomatic coupling at the front with connecting line to the truck tractor EBS, electronic braking system with EBS socket at the front, with connecting cable Note: The trailer may only be towed by vehicles that ensure proper ABS function! Electrics 24 volts, multi-chamber LED lights with resistor, side marker yellow LED lights, LED license plate lights (Note: Certain towing vehicles may show diagnostic errors despite systems working correctly) 2 white front position lights in LED 2 white/red lane marker lights at the rear in LED Additional LED w

Stanje: novo, številka stroja/vozila: c3dd8c834afed73501f8074af, lastna masa: 3 kg, največja dovoljena obremenitev: 20 kg, skupna masa: 24 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/55 r22,5, Further Information Chassis Swap Turntable Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of guide rollers removable, front and rear 4 container locks with robust outriggers on 20-foot base for swap bodies 7.15 and 7.45 Turntable with heavy-duty ball bearing slewing ring 2 wheel chocks with holder Side underrun protection in aluminium Rear underrun protection in steel Front and rear half-shell mudguards 2 stainless steel toolboxes, W=600/H=400/D=500 mm, with polished lockable doors 1 pair of warning signs double LED illuminated, extendable to 3,000 mm at the rear, rear only 1 prep socket for customer-side retrofitting of warning signs at front Turntable trailer coupling Drawbar with tested 40 mm towing eye Drawbar mechanically adjustable in length, 6 positions x 100 mm, and lockable (drawbar length approx. 1900–2500 mm) Drawbar height adjustment via spring Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axles/chassis laser aligned - reduces tyre wear and fuel consumption Air suspension with lift & lower valve Wheels and Tyres 385/55 R22.5 Brand at manufacturer's discretion Steel rims, factory silver Brake System 2-line compressed-air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to tractor unit, EBS, Electronic Braking System with EBS socket at front, including connecting cable Note: The trailer may only be towed by tractor units which ensure correct ABS functionality! Electrics 24 Volt, multi-chamber rear lights, yellow LED side markers 2 white position lights at front 2 white/red lane marker lights at rear Removable beacon 1 additional LED work light at the rear, switched via reverse light 2 LED work lights on both sides (1x left, 1x right), switched via reverse light 1 x 15-pin connector at front, with connecting cable Country of Registration / Plates Country of registration: Germany Bdjdpfx Aoi Riyljb Tsc With Dekra inspection and report (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape acc. ECE R 048, white on the sides and red at the rear Paintwork Chassis hot-dip galvanized incl. passivation, 15 years anti-corrosion warranty Drawbar black KTL-coated

Stanje: novo, številka stroja/vozila: 408ba9a39bbb8087056d6e563, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection made of aluminium Full-width rear mudflap Half-shell fenders on 1st and 2nd axle with anti-spray mudflaps behind each axle; anti-spray mudflaps in front of and behind 3rd and 4th axle Excavator arm recess over the rear axles, starting to the rear, approx. 1800 mm long, approx. 650 mm wide, and approx. 150 mm deep, 2 pairs of lashing holes each rated 5 t located laterally in the excavator arm recess in the main chassis, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock (Padlock not included) 1 storage box let into the gooseneck in the floor with lid, w=720 mm/ l=520 mm / d=170 mm Extendable width to 3,000 mm (not at the rear bevel) (the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) 70 mm timber planks for widening to 3,000 mm Storage compartment for timber planks under the loading platform Lashing rings low-loader (40 lashing possibilities) 1 pair of lashing rings on gooseneck, each 5 t 9 pairs of lashing mushrooms recessed into the outer frame, top and side, each rated 10 t 2 x in the front on the gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated 5 t (for lashing strap hooks) 3 additional pairs of folding lashing rings, each rated 10 t 1 x inside beside the main frame at the beginning of the low-bed 1 x on the gooseneck (protruding) 1 x recessed into the floor behind the last axle Drawbar coupling for turntable trailer Drawbar with certified 50 mm towing eye, towing eye inclined at 8°, D-value at least 160 kN Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 manufacturer’s choice Steel rims, twin mounting, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, including connection lines to the towing vehicle Bodpfx Aei Ri Dajb Todc ABS and ALB, with ABS plug at the front, with connection cable Electrics 24 volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with holder, operated via parking light (beacon removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck at front with steel/chequer plate floor Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber decked Hydraulically operated via tractor PTO with restrictor, control located on the left side at the front Hydraulic connection with SVK connector NW 10/3, incl. connecting hose Registration Country/Plates Registration country: Germany 24/7 Service Hotline Prepared for two-line number plate holder Contour marking with reflective strips according to ECE R 048, side white and rear red Warning plate according to ECE – 70 Paintwork Chassis hot-dip galvanized including passivation, 15-year warranty again

Stanje: novo, številka stroja/vozila: a3b1347da4aa7f31dceb875db, lastna masa: 2 kg, največja dovoljena obremenitev: 9 kg, skupna masa: 11 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Central Axle Trailer Fine-grained steel welded construction 6 pairs of lashing eyes bolted to the outer floor/frame, each rated at 5 tons Gear support leg at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mudflap Quarter-shell fenders Central axle trailer coupling equipment Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles Axles/chassis laser-measured for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Factory silver steel rims Braking System Dual-line air brake system Hand spindle parking brake Integral air reservoir 2 interchange-proof coupling heads at the front with connecting pipes to the towing vehicle ABS and ALB, ABS plug at the front, with connecting cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side markers 2 white front position lights 2 white/red rear marker lights 2 x 7-pin interchange-proof plugs at the front, with connecting cable Floor Steel/chequer plate floor for high point load capacity Note: Slight floor waviness possible due to welding distortion! Platform length approx. 5,200 mm Rear tapering approx. 900 mm Front wall / corner posts 25 mm aluminum hollow profile, 320 mm high Side walls Bdedpfoi Ri Iljx Ab Toc 25 mm aluminum hollow profile, 320 mm high, foldable and removable Rear wall / corner posts 1 pair of steel stanchions fixed to the frame and with holders for securing the loading ramps, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with hand grip on the ramps wooden inlay with gas strut for one-person operation Operating Instructions The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable within the permitted axle/support/coupling loads. (Poor driving and tracking may result from incorrect load distribution) Country of Registration / Plates Country of registration: Germany With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau, 10-year warranty against rust-through Front wall aluminum Side wall anodized aluminum Loading ramps hot-dip galvanized Note: Archive images!

Stanje: novo, številka stroja/vozila: c1946328bb4efe26fccb128ee, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385 / 55 r 22,5, Further Information Chassis Turntable Semi-trailer for Waste Disposal Fine-grained steel welded construction 2 longitudinal beams with cross members, top side of the longitudinal beams designed as a container roller track in wear-resistant design, rear-loadable, with run-up ramp. Suitable for roll-off containers with a length of 6.5/7.0 m. Container Locking System: - 2 pairs of locking hooks recessed into the floor - Pneumatic actuation The container locking system is a 2-point design acting internally; locking of roll-off containers with an internal strut is not possible (for transporting roll-off containers with subframes according to DIN 30722). Turntable with robust slewing ring Wheel chocks with holders Side underride protection, aluminium Rear underride protection, steel Half-shell mudguards Drawbar equipment for turntable trailer Drawbar with tested 40 mm towing eye Axles + Suspension SAF disc brake axles with 430 mm brake disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension Wheels and Tires 385/55 R 22.5 Manufacturer’s choice Steel rims, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake Immobiliser: When container locking is open, the spring-loaded parking brake is activated Vehicle – Driving Stability System 2 reverse-polarity safe coupling heads at the front, with connecting lines to the truck EBS, Electronic Braking System with EBS plug at the front and connecting cable Note: The trailer may only be towed by vehicles that guarantee effective ABS operation! Bedpfxji Ri Nmo Ab Tedc With lift and lower valve Electrics 24 Volt, multi-chamber rear lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin reverse-polarity safe plugs at the front, with connecting cable Registration/Country Plates Registration country: Germany With DEKRA inspection and certificate (according to §13 EC – FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame in DB 7350 Nova Grey, 10 years warranty against corrosion perforation Drawbar KTL black Note: Archive images!

Stanje: novo, številka stroja/vozila: b6e633155abf971a017e4b53b, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385 / 55 r 22,5, Further Information Chassis Turntable Trailer Disposal Fine-grained steel welded construction Carriage: The container is placed on the carriage from the rear and pushed forward, front container stop adjustable for 6.0 / 6.5 and 7.0 m roll-off containers with external roller. Container Locking: - 2 pairs of locking hooks recessed in the floor - Pneumatic actuation The container lock is of 2-point design, operating from the inside, and locking containers with internal crossbars is not possible. Turntable with robust ball bearing slewing ring Wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection Half-shell fenders Rear impact protection vertically on left and right, with delta rubber on rear underrun holder Turntable trailer coupling device Drawbar with certified 40 mm towing eye Axles & Suspension SAF disc brake axles Axle/chassis laser alignment reduces tire wear and fuel consumption Air suspension with raise & lower valve Wheels and Tires 385 / 55 R 22.5 Manufacturer's choice Bdodpfei Ri Nqsx Ab Tsc Steel rims factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake Immobilizer: When the container lock is open, the spring-loaded parking brake is activated Vehicle Stability System 2 interchangeable coupling heads at the front, with connection lines to the towing vehicle, EBS electronic braking system with EBS plug at the front, with connection cable Note: The trailer may only be towed by tractors that ensure effective ABS function! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 additional LED work lamp at the rear, switched via reverse light 2 x 7-pin interchangeable plugs at the front, with connection cable Registration / Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tapes according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau Drawbar KTL black Note: Archive images!

Stanje: novo, številka stroja/vozila: 55d3c5c03e032385649769b1b, lastna masa: 9.900 kg, največja dovoljena obremenitev: 14.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with heavy-duty slewing ring, integrated storage box incl. Turntable front structure Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mud flaps Extendable widenings to 3,000 mm (not at rear taper) (track width of the machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central compartment on loading area for timber planks 70 mm timber planks for widening to 3,000 mm Lashing points Low-loader 3 pairs of integrated lashing points, each rated to 10 t, at the front floor 6 pairs of mushroom lashing points, top and side integrated in outer frame, each 10 t 1 x at neck area remaining points distributed, distance no greater than 1,200 mm 1 x at rear taper 5 pairs of stake pockets integrated in the outer frame, internal size 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly for trailer turntable Drawbar with certified 40 mm towing eye Note: For 40 mm towing eye, the maximum permissible gross weight of the towing vehicle is 18,000 kg. Otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization front and rear (rocker compensation) Wheels and Tires 235 / 75 R 17.5 manufacturer's choice Steel twin wheels, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the truck ABS and ALB, with ABS connector at front, connection cable included Attention: The trailer may only be towed by vehicles that ensure ABS functionality! Electrics 24-volt multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear lane marker lights 2 x 7-pin non-interchangeable connectors at the front, with connection cable 1 LED beacon with bracket, operated via parking lights (removable beacon) 2 pairs of warning boards, double LED-lit and extendable to 3,000 mm Floor Steel floor at front section thereafter 70 mm softwood floor, in wheel arch area with steel/chequer plate covering Rear taper with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable wooden inlays spring-assisted lifting Operating instructions Exception permit required for 10,000 kg axle load, only indivisible loads allowed!!! The specified total weight is technically possible. Depending on the cargo, the full gross weight may not be achieved while observing permissible axle/pin/support loads (poor tracking and handling may result from incorrect load distribution) Country of Registration / Plates Registration country: Germany 1 with Dekra inspection and report (according to §13 EC-FGV) 24/7 service hotline prepared for 2-line license plate holder Bdodpfji Ri I Eex Ab Tsc Conspicuity markings with reflective strips acc. ECE R 048, white on the sides, red at the rear Paint Frame RAL 3002 Carmine Red 10 years warranty against rust-through Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Attention: Archive photos!

Stanje: novo, številka stroja/vozila: f79a9f15e7131d57a512793ab, lastna masa: 8.900 kg, največja dovoljena obremenitev: 15.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball race Foldable rear supports 2 wheel chocks with holders Side underrun protection, aluminium Rear spray guards across the full width Quarter fender before 1st axle Extendable outriggers up to 3,000 mm (not in the rear slope area) (Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Bdedpfxsi Ri Izs Ab Tsc Central storage compartment for timber planks on the loading area 70 mm timber planks for extension to 3,000 mm Lashing points Low-bed 1 pair of lashing rings on gooseneck, each rated at 5 t 9 pairs of lashing mushrooms, flush-mounted on the top and side in the outer frame, each rated at 10 t 2 x front on gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated at 5 t (for attaching tie-down straps) Drawbar System Turntable trailer Drawbar with certified 50 mm towing eye Axles & Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mount and mechanical axle load compensation (rocker balance) front and rear Wheels and Tyres 235/75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake System 2-line air brake system Spring-loaded parking brake 2 swap-proof coupling heads at the front with connection lines to towing vehicle ABS and ALS, with ABS connector at the front and connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, side amber LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 LED beacon with holder, switchable by parking light (removable) 2 pairs of warning boards, double LED illuminated and extendable up to 3,000 mm 2 x 7-pin swap-proof plugs at the front, with connecting cable Floor Gooseneck at front with steel/chequer plate covering Thereafter 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood plated Hydraulic activation via auxiliary drive on tractor unit with throttle, operation on front left side Hydraulic connection with SVK connector NW 10/3, including connection hose Operating Instructions A special permit is required for an axle load of 10,000 kg; only indivisible loads possible!!! The specified gross weight is technically possible; depending on the freight, the permissible gross weight may not be achieved while respecting axle, support and kingpin loads. (Poor driving and trailing behaviour possible due to incorrect load distribution) Registration Country / Plates Country of registration: Germany With Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Included Prepared for double-line number plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Paintwork Frame DB 7350 Nova Grey 10-year warranty against rust-through Drawbar galvanised or black, at manufacturer’s choice Access ramps hot-dip galvanised

Stanje: rabljeno, lastna masa: 3.850 kg, največja dovoljena obremenitev: 14.150 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2011, naslednji pregled (TÜV): 12/2025, dolžina tovornega prostora: 6.900 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.000 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: siv, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 2 osi, BPW osi, vrtljiv podvoz, zračno vzmetenje, ABS (protiblokirni sistem), zaščita pod vozilom, bočna aluminijasta zaščita, dvojne pnevmatike, zaboji. Bdjdpfxjxpxr Ij Ab Tsc Nadgradnja: Platforma s 4 odstranljivimi stebrički, višina nakladanja 1000 mm, 2x BPW osi 9t, bobnaste zavore! Tehnični pregled velja do 06/2026, dobro ohranjeno! Podatki o dodatni opremi brez garancije; pridržujemo si pravico do sprememb, vmesne prodaje in napak!

Stanje: novo, Leto izdelave: 2024, Buy online at trailer-shop Many models available online at ANHÄNGERWIRTZ Shop conveniently online, 24/7 Pick up yourself or have it delivered 😊 The online pick-up market for your new trailer offers strong brand models! Over 850 new trailers in stock Over 130 used trailers always available. Non-binding example: various versions available Cargo Roadster 400, 312x164x184 cm, aluminum/poly black, side door, alloy wheels, 1300 kg, Pullman Box trailer Cargoboxx C400 Roadster, 312x164x195 cm cargo area, 1300 kg, Pullman II V chassis suitable for 100 km/h, aluminum side walls with side door, aerodynamically shaped polyester front and roof, black, aluminum plank floor and aluminum rear wing door as ramp combination, alloy wheels silver/black, interior light, adjustable tie-down brackets, automatic jockey wheel... Bdedpfxjq D Emhj Ab Tsc Invoice with VAT listed - dealer warranty - trailer dealer for over 34 years Sales and telephone order acceptance during our business hours, Monday to Friday, or around the clock through our online shop at trailer-shop Copyright – Trademark protection 2025/05 ROADSTER4001300ALUPOLYBLACKSTAF

Stanje: rabljeno, največja dovoljena obremenitev: 30.670 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 13.850 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.860 mm, prostornina tovornega prostora: 93 m³, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Moving floor +/- 92 cbm, double-wing door with rotary bar lock at the rear, access steps and standing platform at the front of the body, sliding tarpaulin, "Cargo Floor" floor with 21 planks 10 mm, stainless steel wear plate at rear under the moving floor, 12 lashing rings per side, complete emptying (moving bulkhead), push-in/pull-out function, loading pressure gauge, folding rear light guard, cable remote control, ABS, EBS, BPW Eco Plus axle(s), disc brake system, support legs, 1x toolbox, vehicle may be stickered and/or labeled with advertising. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from one of our partner workshops! The vehicle may be stickered and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. Bsdpfx Abeuf Irue Tjdc We are happy to offer you a financing or leasing option for this unit. Please contact us!

Stanje: novo, največja dovoljena obremenitev: 30.010 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: Term 48 months, down payment only the VAT, residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low-loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Loading length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, load area including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holders Aluminum side underrun protection Rear spray flap across the entire width Bedotrizkspfx Ab Tedc Half-shell mudguards on 1st and 2nd axle with anti-spray flaps behind each axle, anti-spray flap behind 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, and approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator arm recess, lateral on the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel carrier for 1 spare wheel, upright on the gooseneck right at the front. Spare wheel, make identical to the main tires, steel rim Storage box recessed in the gooseneck floor with lid; dimensions W = 720 mm / L = 520 mm / D = 170 mm 1st pair of wheel recesses after the gooseneck, recessed in the low-bed lane area, ramped for entry, bottom length approx. 1,600 mm, depth approx. 400 mm. Note: Frame in the main beam area is 400 mm higher than the wheel recess 2nd pair of wheel recesses between the axles, recessed in the low-bed lane area, ramped for entry, bottom length approx. 600 mm, depth approx. 300 mm. Note: Frame in the main beam area is 300 mm higher than the wheel recess Extendable width up to 3,000 mm (not extendable in the rear bevel and not in the lower wheel recesses) (track width of the construction equipment or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks below the low-bed area 70 mm wooden planks for extension to 3,000 mm Lashing eyes on the low-loader 1 pair of lashing eyes, recessed in the front of the gooseneck, 5 t each 4 pairs of lashing holes in the outer frame, 5 t each (for lashing straps) 8 pairs of lashing rings, integrated on top and side of outer frame, 10 t each 2 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets integrated in the outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 1 pair of folding lashing eyes, additionally recessed in the floor, 10 t each 1 inside next to the main frame at the start of the low bed 2 pairs of additional folding lashing eyes, 10 t each 1 on the gooseneck (protrudes over edge) 1 behind last axle, recessed in floor Drawbar coupling / turntable trailer hitch Towing bar with certified 50 mm towing eye, towing eye inclined 8° D-value at least 160 kN Axles & suspension BPW drum brake axles "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical front axle load equalization (rocker balance) Wheels and tires 235 / 75 R 17.5" Manufacturer's choi

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with ramps, model VTS 400 Gross weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm; neck approx. 2,490 mm; loading bed incl. rear taper approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information: Plus pre-freight / preparation ex stock 26639 Wiesmoor: €1,280.00 / net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race ring Foldable rear support 2 wheel chocks with holders Bsdjxrx Nlspfx Ab Tsdc Side underrun protection, aluminium Full-width rear mud flap Half-shell mudguards, 1st and 2nd axles with anti-spray flaps behind each axle, Anti-spray flaps in front of and behind 3rd and 4th axles Excavator stick trough over rear axles to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing holes, each 5 t, in the excavator stick trough on the longitudinal frame, approx. 300 mm from the front and 200 mm in front of the rear slope 1 plastic toolbox, w=600 mm / h=425 mm / d=460 mm, lockable Storage box recessed in the neck floor with lid, w=720 mm / l=520 mm / d=170 mm Extendable outriggers to 3,000 mm (not for rear slope) (Track width of construction machinery/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for wooden planks under the low-bed deck Wooden planks, 70 mm, for extension to 3,000 mm Lashing points, low-loader: 1 pair of lashing cutouts in the front longitudinal beams, embedded in the neck, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching ratchet straps) 9 pairs of lashing mushrooms, embedded in and above the outer frame, each 10 t: - 2 × on the neck - 7 × in the low-bed section First lashing point 250 mm from the front, last max. 250 mm from the rear; lashing point spacing max. 1,100 mm Additionally, 3 pairs of folding lashing eyes, each 10 t: - 1 × on the neck (protruding) - 1 × at the start of the low-bed inside the longitudinal beams - 1 × in the floor behind the last axle Drawgear, turntable trailer: Drawbar with certified 50 mm eye Drawbar height adjustment via spring Axles & Suspension: Drum brake axles, per manufacturer’s choice "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and Tyres: 235 / 75 R 17.5", per manufacturer’s choice Steel twin wheels, factory silver Braking system: 2-line air-operated brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal for display in truck cab (truck must be equipped accordingly; not a calibrated scale) Vehicle stability system: 2 non-interchangeable coupling heads at the front, connection lines to the tractor 12-24V EBS, electronic braking system with EBS socket at the front, including connecting cable (Knorr brand) Attention: The trailer may only be towed by vehicles that guarantee ABS functionality! Electrics: 12-24V, multi-chamber LED lights, side LED marker lights (yellow), LED license plate lighting (Note: Some towing vehicles may display incorrect errors despite proper function) 2 white front position lights, LED 2 white/red rear lane marker lights, LED 2 × 7-pin non-interchangeable sockets at the front, with connection cable 1 LED rotating beacon with bracket, switchable via sidelights (removable beacon) 2 pairs...

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl 4-Axle Low Loader Trailer with Ramps, Model VTS 400 Gross weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Total length: 11,940mm Total loading length: approx. 10,410mm; Gooseneck: approx. 2,490mm; Loading platform incl. rear bevel: approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information plus delivery/preparation from stock location 26639 Wiesmoor: €1,280.00 net Leasing offer: term 48 months, down payment only VAT, residual value 40% Monthly instalment EUR 759.00 Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap Half-shell mudguards on axle 1 + 2 with anti-spray flaps behind each axle Anti-spray flaps before and behind axles 3 and 4 Excavator arm recess over rear axles, stretching to the rear, approx. 1,800mm long, 650mm wide, 150mm deep 2 pairs of lashing holes (5t each) in the excavator arm recess, side-mounted on the longitudinal frame, approx. 300mm from the front and approx. 200mm before the rear bevel Bdedpfovv D Ixjx Ab Tsc 1 plastic toolbox, w=600mm / h=425mm / d=460mm, lockable Storage box recessed into the gooseneck floor with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not at rear bevel) (Note: the track width of machines or vehicles being transported must not exceed the outer frame width of 2,550mm) Wooden plank compartment under the low-bed platform 70mm wooden planks for extension to 3,000mm Low loader lashing points 1 pair of lashing cutouts sunk in the longitudinal beam at the front of the gooseneck, 10t each 4 pairs of lashing holes in external frame (5t each, suitable for tension belt attachment) 9 pairs of lashing mushrooms set into the external frame above and on the sides, each 10t 2x front on gooseneck 7x low-bed area 1st lashing point 250mm from front, last max. 250mm from rear, max distance between lashing points 1,100mm 3 additional pairs of folding lashing eyes, 10t each: - 1x on gooseneck (protruding) - 1x inside start of low-bed area in longitudinal beams - 1x recessed in floor behind last axle Towing arrangement, turntable trailer Drawbar with certified 50mm draw eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice Chassis/axle laser alignment (reduces tyre wear and fuel consumption) Air suspension with raise & lower valve + auto reset function Wheels and tyres 235/75 R 17.5”, manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line pneumatic brake system Spring-loaded parking brake Axle load detection via EBS CAN-Bus signal (for in-cab display, truck must be pre-equipped, not a calibrated scale) Vehicle stability system 2 foolproof coupling heads at the front, with connecting lines to tractor unit 12-24V EBS (Electronic Braking System) with EBS plug at the front and connecting cable (Knorr brand) Note: Trailer must only be towed by towing vehicles capable of ensuring full ABS functionality! Electrics 12-24V, multi-chamber LED lamps, amber LED side markers, LED license plate lighting (Note: On certain tractor units, malfunction messages may appear even if operational) 2 white position lights at the front (LED) 2 white/red contour marker lights at the rear (LED) 2x 7-pin foolproof connectors at the front

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Bdjdpferducpsx Ab Tsc Storage compartment for timber planks under low-bed platform 70 mm timber for widening to 3,000 mm Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Drawbar with certified 50 mm towing eye Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Wheels and tires 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A

Stanje: novo, največja dovoljena obremenitev: 30.310 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Gross weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Loading bed: 7,150 mm including 850 mm drive-on slope Loading height: 900 mm 1st pair of wheel recesses after drop in the loading bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the loading bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning boards, rotating beacon, comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator arm recess, 1,800 mm long, 150 mm deep Drawbar 50 mm Bodpfsnzlg Dox Ab Tsdc Air suspension with raise/lower valve, separately operable BPW drum brakes Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps: 2,800 mm x 750 mm, hydraulically operated Hydraulic lateral displacement Hire purchase offer: term 48 months, residual value 40%, down payment only the VAT on the installments, monthly payment EUR 970.00 net Vehicle available from 11.09.2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121, right next to the main entrance. Further 3-, 4- and 5-axle low loaders new and used available immediately

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, obratovalne ure: 7.202 h, nosilnost: 4.000 kg, dvižna višina: 6.000 mm, težišče tovora: 600 mm, vrsta goriva: plin, tip droga: dupleks, gradbena višina: 3.800 mm, proizvajalec motorjev: GM 3.0, dolžina vilic: 1.200 mm, skupna masa: 6.100 kg, lastna masa: 4.000 kg, skupna višina: 3.800 mm, skupna dolžina: 2.300 mm, skupna širina: 2.200 mm, največja dovoljena obremenitev: 4.000 kg, gorivo: utekočinjeni naftni plin (LPG), Oprema: bočni pomik, kabina, nastavljiva roka, osvetlitev, vilice za palete, Combilift v zelo dobrem stanju. Bsdpozbbrpofx Ab Tedc Duplex steber 6000 mm s prostim dvigom Sideshift Viličarje prodajamo po opravljenem celotnem servisu. Pripravljeno za končnega uporabnika. Takoj pripravljeno za uporabo. Organiziramo prevoz po Evropi in po svetu.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, obratovalne ure: 6.551 h, nosilnost: 4.000 kg, dvižna višina: 7.500 mm, prosto dvigovanje: 2.700 mm, težišče tovora: 600 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 3.550 mm, proizvajalec motorjev: Kubota, dolžina vilic: 1.400 mm, Tip prednje pnevmatike: superelastične pnevmatike (črne), velikost sprednje pnevmatike: 200/50-10, tip zadnje pnevmatike: superelastične pnevmatike (črne), velikost zadnje pnevmatike: 27x10-12, skupna masa: 7.100 kg, lastna masa: 7.100 kg, skupna višina: 3.550 mm, skupna dolžina: 2.600 mm, skupna širina: 2.200 mm, največja dovoljena obremenitev: 4.000 kg, gorivo: dizel, Oprema: kabina, nastavljiva roka, osvetlitev, vilice za palete, Combilift je v zelo dobrem stanju. Samo 6551 ur. Viličarje prodajamo po celotnem servisu. Pripravljeni za končnega uporabnika. Pripravljeni za uporabo. Organiziramo prevoz po Evropi in po svetu. Bdjdpfx Abozbbrij Tsc

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, Leto izdelave: 2015, obratovalna teža: 32.700 kg, Oprema: ABS, Polpriklopnik Menci SA850R ALU-kipar 36 m³ s pomično ponjavo, zračno vzmetenje, 3 osi, BPW osi, skupna dovoljena masa 39.000 kg - nosilnost 32.700 kg. Skupna dolžina polpriklopnika 10,7 m, širina 2,55 m. 1. os nastavljiva po višini, 3. os vodljiva. Pnevmatske gume 50% (385/65 R22.5), ABS. Neto izvozna cena 12.500,00 EUR. Vsi podatki brez garancije/pridržujemo si pravico do napak. Bsdpfx Ajtzlmieb Tedc

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, Leto izdelave: 2015, obratovalna teža: 32.700 kg, Oprema: ABS, Polpriklopnik Menci SA850R\nALU prekucnik 36 m³ z drsno pomično ponjavo\n3 osi\nzračno vzmetenje\nBPW osi\nSkupna dovoljena masa 39.000 kg - nosilnost 32.700 kg\nSkupna dolžina polpriklopnika 10,7 m\nŠirina 2,55 m\n1. os nastavljiva po višini\n3. os krmiljena\nPnevmatike 50% (385/65 R22.5)\nABS\nIzvozna neto cena 12.500,00 EUR\nVsi podatki brez garancije/pridržujemo si pravico do napak Bdedpfx Ajtznaleb Tjc