Müller-Mitteltal T4 Kompakt 40,0 nakup rabljenega (2.052)

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power plug * LED tail lights 12/24 V * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical foldable support legs at rear Iodpfsx Hm Rcsx Aicjau * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at the front right side of the chassis * Bolted underride guard * Plastic quarter mudguards ----Tipping Platform: * Mesh hooks positioned at the central locking mountings and 2 at the front bulkhead * Steel pallet - 3-way tipper body with reinforced Strong sidewalls (continuous upper sidewalls with internal tube reinforcement – without central stanchions – foldable with sidewall spring lifting device) * Screw-fixed rear stanchions * Combination steel wing doors at rear, 2-leaf, asymmetrically split, can be swung and locked up to 270° (not foldable), with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rod lock at rear and central lock; deactivation function for automatic tailgate opening during rear tipping with opened wing door * 4 mm fine-grained steel floor plate ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t lashing rings recessed in the outer frame on each side ----Chassis: * Chassis made of fine-grained steel ----Ramps: * Rear mounting track for deployable ramps * 1 pair of aluminium ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps integrated below the loading area in the chassis at the rear ----Tyres: * Tyre size 358/55 R 19.5 ----Painting: * Drawbar, underride guard, rear stanchion, and rear foldable support legs hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black shade * Sidewalls painted in RAL colour of choice (no special or metallic paint) – can be modified up to approx. 6 weeks before completion ----Other Information: * Reinforced body with load securing certificate * Errors and prior sale excepted * Sample images ----Delivery Time: * Immediately available from calendar week 29/2026

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED rear lights 12/24 V * Tire pressure monitoring system with in-cab display via EBS signal – no truck-side installation required Iodsx Hm Riepfx Aiceau ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted right front of the chassis * Bolted underrun protection * Plastic quarter mudguards ----Tipper Body: * Net hooks mounted at the positions of the central locking as well as 2 pieces on the front wall * Steel pallet 3-way tipper body with reinforced strong side walls (continuous side walls with internal tube reinforcement – without intermediate stakes – drop-down with board wall spring lifter) * Rear uprights bolted * Combination steel swing doors at the rear, two-leaf, asymmetrically split, pivotable and lockable at 270° – not drop-down – with additional pendulum frame for automatic rear wall opening during tipping, locking via galvanized rotary latch at the rear and central locking. Deactivation function for automatic rear wall opening when tipping backwards with open swing door * 4 mm fine-grain steel floor plate ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t lashing rings each side, integrated into the outer frame ----Chassis: * Chassis made from fine-grain steel ----Ramps: * Rear ramp rails for drive-on ramps * 1 pair of aluminium drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for the ramps integrated into the chassis under the loading bed, accessible from the rear ----Tyres: * Tyres 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear upright, and rear folding supports hot-dip galvanized * Axles, springs, air reservoir, and landing leg painted in black tone * Side walls painted in a RAL colour of your choice (no special or metallic paint) – can be changed up to about 6 weeks before completion ----Information: * Reinforced body with load securing certificate * Errors and prior sale excepted * Sample images ----Delivery time: * Available immediately from CW 29/2026

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, RAK 18.0 External Roller with Rearward Tipping Function Iedox Ipa Ajpfx Aicsau ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when disconnecting the brake) ----Towing Bar: * Pneumatically lowerable drawbar, approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General Attachments: * Plastic toolbox - approx. 858 x 500 x 500 mm - mounted right side * Enclosed plastic mudguards front & rear axle * Enclosed side underrun protection * Bolt-on rear underrun protection * Storage box for container nets made of galvanized perforated sheet, approx. 1,000 x 500 x 500 mm * Foldable A-board at the rear * Rear impact protection buffers ----Electrical / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 15-pin 24V power connector * LED lighting system for 12 & 24V * 2 additional LED reverse lights * RDÜ tire pressure monitoring system ----Suitable for Container Lengths: * For containers 6,500 mm to 7,000 mm ----Container Running Surface / Tipping Platform: * External roller guidance through flat steel limits at approx. 2,180 mm clear width, in combination with 3 centering pads per side for container guidance * For accommodating and supporting the container rollers, there are 2 recessed, tipper frame-connected roller mounts at the rear, with pneumatic safety lock against longitudinal movement * The positive locking of the roll-off containers is by a pneumatic cross-clamping unit (operable from one side), installed at the front of the tipping frame and accessible externally * Chassis frame with internally rearward-tipping main frame - hydraulically operated tipping unit (single-cylinder design) * Tipping angle 42° * Rubber pads between chassis and tipping frame * Loading of containers from the front; hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading Height: * Unladen approx. 1,270 mm ----Paintwork: * Underrun protection and locking parts (unfinished, without top coat) * Bogie, air tanks, axles, slewing ring, and drawbar painted in black * Hot-dip galvanized ----Information: * For container transport according to DIN 30722 Part 1 * New vehicle, no initial registration, with manufacturer warranty * Subject to errors and prior sale * Sample photos (vehicle images may vary due to special equipment) ----Delivery Time: * Available from CW 24/2026

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear Iodpfjpk D Iiox Aicoau ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffer * Mechanical rear support legs ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel sheet floor with roller recesses in the bogie area * Suitable for roll-off container transport with container lengths from 5,500 to 7,000 mm * Pneumatic 4-point container clamp lock and mechanical plug-in end stops at the front of the tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swinging end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips * 4 cloverleaf-style lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp run-up area * 1 pair of aluminum loading ramps (16 t/pair) 2,800 x 400 mm suitable for rubber-tyred and tracked vehicles (lockable storage compartment at the rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on the sides & rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible total weight technically possible: 27,000 kg * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: Ijdpjrwc R Aofx Aicjau * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power plug * LED lighting ----General Fittings: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation before the bulkhead and rear slope for retrofitting container locks for the transport of 20" containers * Bolted bulkhead made of smooth sheet steel * Side walls made of trapezoidal-profiled steel, folding design, divided centrally * Steel rear wall, can be inserted between the ramp brackets, stowed inside in front of the bulkhead when not in use * Bolted rear stanchions Isdpov D Tcbsfx Aicjau ----Load Securing: * Slotted outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Optionally, installation of 3 t folding lashing rings every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing point * Various holes for 1.2 t lashing options in the bulkhead and rear crossmember * Profifix lashing rail along the centerline for lashing options up to LC 3000 daN ----Ramps: * One-piece mechanical grid approach ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach slope approx. 860 mm chassis height ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, bulkhead, rear panel, folding supports, and approach ramps hot-dip galvanized * Axles, springs, air tank, flange drawbar eye, and support winch painted in black * Side wall paint in a RAL color of your choice (special or metallic paints not available), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified construction according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. week 30 / 2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle trailing steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift-and-lower function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder under the chassis on the right side ----Low Loader Deck: * Gooseneck platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the gooseneck, foldable and removable * Rear wall – 150 mm – fitted * Rear slope at the gooseneck platform to the low-bed approx. 700 mm long * Gooseneck platform with 50 mm timber planks, low-bed platform with 60 mm timber planks * Tread plate over the axles ----Extensions: Iaodpfxey Ngz Hj Aicou * 8 x mechanical fold-out extensions to 3 m total width, but not on the rear slope (extension planks present with storage on gooseneck platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the gooseneck platform: 2 x 6.3 t lashing rings each side and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform sides: 2 x 13.4 t lashing rings each, and 4 x 10 t swivel and lowerable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side and rear 1 lashing ring in the excavator arm recess * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Arm Recess: * Excavator arm recess from end of last rigid axle, over steering axle to end crossmember, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading Ramps: * Mechanically one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofit of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the drive-up slope * Rubber on the ramp and drive-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from 40 up to 120 l/min) ----Loading Dimensions: * Loading area, gooseneck platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm drive-up slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gears, air reservoirs painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may include features not part of the offered vehicle * Sample images ----Delivery time: * tba

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel packages front & rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox located on the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted to the side under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (rotating warning light) at rear * Drawbar scissors with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets per side (stakes not included), with integrated lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions and recessed into the external frame; corner loads up to 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not at the rear taper) Iaodpfx Aietplwfoceu * Extension boards stored in a compartment under the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the digger stick rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves, hydraulically adjustable lateral ramp shift * Hydraulic flow divider in the trailer (suitable for truck hydraulic pump outputs over 40 ltr. up to max. 140 ltr./min), two-circuit hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height approx. 860 mm +/- 30 mm adjustment unit * Chassis, turntable, fold-out outriggers, rear drop legs and drive-on ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted in black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from CW 19/2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign kits at the front and rear * Front: closed plastic mudguards, rear: straight galvanized steel mud flaps, each with splash guards * Contour marking tape, reflective, on sides and rear * Foldable (hot-dip galvanized) tool box cover on the turntable platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * Four stake pockets each side (no stakes included), also suitable for lashing * Load securing package consisting of: 2 lashing points (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame (13.4 t in corners, otherwise 10 t) * 6 pairs of mechanical folding outriggers for total width of 3 m (not in the rear slant) * Widening planks stored in the center of the loading area * Excavator arm support over rear axle up to the rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides in the excavator arm support) * Mechanical one-piece ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp displacement * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm Iaedpfx Aijx Ipa Nscju * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach incline) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Gross technical weight of 30,000 kg possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to prior sale and errors * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9,9 ML: ----Zavorni sistem: * EBS-zavorni sistem * Bobnaste zavore * Naprava za odklepanje vzmeti v zavornih cilindrih v sili ----Os: * BPW os ----Vzmetenje: * Parabolične vzmeti ----Vlečna gred / Vlečni obroč: * Vlečna gred z 40 mm vijačenim vlečnim obročem (nastavljiva po višini mm) Iajdpfeu I Iqrjx Aicou ----Elektrika / Razsvetljava: * 15-polni električni priključek * LED osvetlitev * Utripajoče LED stranske označevalne luči * RDÜ sistem za nadzor tlaka v pnevmatikah ----Splošni priključki: * Sprednje podporno vitlo * Zadnje kvadratne podporne noge s podporno ploščo, vzmeteno, z varnostnimi zatiči za različne višine * Zaprti blatniki iz jeklene pločevine s ščitnikom proti brizganju * Zaprta stranska zaščita za uporabo kot oglasni prostor * Plastična orodjarna s talno oblogo (v ležeči postavitvi) pribl. 500 x 350 x 400 mm ----Nadgradnja: * Zasukljiva kabelska navojna nadgradnja, širina med nosilci 1.700 mm s pritrdilnim zapiralom za varovanje bobna na koncih rok ter zaklepom bobnaste nadgradnje s podvozjem s centralno nameščeno krempljasto zaporo * Motorno-hidravlični pogon bobna z oljnim motorjem * Ventili in pomične pogonske valje obložene z gumo * Hidravlični regulator hitrosti in zavora za pogon bobna * Jeklena os bobna s premerom 76 mm s centriranjem in vrtljivimi konci * 1 par centrirnih stožcev iz poliamida s stopničasto prehodnostjo ----Podvozje: * Podvozje iz torzijsko odpornih kvadratnih cevi in prečnih nosilcev ----Črpalni agregat: * Hidravlični črpalni agregat z bencinskim motorjem Loncin, vključno z ročnim in električnim zagonom * Rezervoar za gorivo in ročni zaganjalnik * 13 KM z zobniško črpalko (150 bar) ----Pnevmatike: * 315/80 R 22,5 ----Lastna masa: * 2.690 kg lastne mase ----Barvanje: * Vozilo je vroče pocinkano ----Informacije: * Novo vozilo s polno garancijo proizvajalca * Napake in predprodaja pridržane ----Dobavni rok: * Na voljo približno od 41. tedna 2026 dalje.

Stanje: novo, največja dovoljena obremenitev: 27.940 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function, including RtR valve * Start assist for shunting, applied to first axle via EBS – no truck-side installation – when lift axle is raised +30 mm ride height * Smart-Board installed on trailer as an info tool, with pressure sensors for total axle load indication * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for trailing axle controlled from driver’s cab for maneuvering purposes via EBS (no truck-side installation) * 2" king pin * 1 lift axle * Side underrun protection * Front aluminium drop support legs and rear swing-down supports on chassis * Alcoa LVL One aluminium wheels * 15-pin electrical connector * LED lighting 12/24 V * Removable rear LED beacon * 2 additional LED reverse lights * 2 LED work lights mounted on trailer sides – no truck-side installation * 7-pin power socket at rear for overlength lighting * Side marker lamps with indicator activation * Tyre pressure monitoring system with display in truck via EBS signal (no truck-side installation) * Mechanically adjustable warning sign sets front and rear Isdpfx Aiswh Hdxoceau * Straight steel fenders * Saddle platform with 45° bevelled front corners and front toolbox made of galvanized, powder-coated steel sheet (B = 2,480 x H = 500 x L = 665 mm), top hinged lid and side doors at the beveled corners * 400 mm aluminium side boards (RAL 9010 pure white) fold-down and removable, mounted laterally on the saddle platform * Rear wall –150 mm– slotted in * Tapered rear on the saddle platform to lowbed approx. 700 mm long with chequer plate covering and lashing bar at end for attaching aluminium ramps * Saddle and lowbed platform with 50 mm clamped wooden planks * Tear plate above the axles * Prepared for 3 mounting shafts under the saddle platform for optional aluminium ramps storage * Swing arm as a carrier for connection lines from truck to trailer * Load securing package consisting of: outer frame of the saddle platform with punched holes, 45° bent and hole-pattern for lashing devices (2 t lashing force per point, min. 480 mm spacing), side-mounted 2 x 6.3 t recessed lashing rings per side, 1 x 16.5 t lashing ring per side at incline from lowbed to saddle platform, 2 pairs 16.5 t lashing rings in lowbed (1x on longitudinal beams after the step, 1x above the centre axle beside longitudinal beam), side 3 x 13.4 t lashing rings per outer frame (1x at start of platform step, 1x start of ramp slope, 1x end of ramp slope), 3 x 10 t each side (2x between front wheel recess and 1st axle, 1x between 2nd and 3rd axle), 3 x 5 t per side screwed to the wheel recess outer frames (2 at front, 1 at rear recess) * Extended excavator arm trough from end of last rigid axle over steering axle to end cross member, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 / D front = 170 mm; each side 2 x 6.4 t lashing rings in the arm trough * Each side two wheel recesses, 390 mm deep and 640 mm wide for transporting wheel loaders with wheelbase 3,000–3,590 mm, tyre diameter up to 1,760 mm – retractable covers – * Second retractable cover ...

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles Iodpfx Ajx Ipapsicoau ----Suspension: * Parabolic springs with compensating aggregate ----Drawbar / Drawbar Eye: * Drawbar adjustable in height by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flanged drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * LED rotating beacon (removable) at rear ----General Attachments: * Support winch in front * Externally mounted hot-dip galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right, outside at the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation in front of front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Sidewalls made of trapezoidal profile steel sheet, foldable with drop-side spring-assisted lifting device * Steel rear wall can be slid between the ramps – storage bracket for unused rear wall inside by the front wall * Rear stanchions bolted * Rear approach angle approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strips on the inside of ramps * 12 mm thick and 210 mm wide rubber strips on the approach slope and externally on the low-bed platform (from front wall to end sill) ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing rings every 600 mm possible * 1 x 6.3 t lashing ring at each front and rear corner * Various drill holes in front wall and end sill for 1.2 t lashing options ----Ramps: * One-piece mech. grating ramps with spring system for one-man operation, approx. 2,750 x 870 mm (can be compressed to 20 mm) ----Paintwork: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air tank, and flanged drawbar eye painted black * Sidewalls painted RAL 9010 pure white ----Info: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery time: Vehicle is immediately available

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment by draw spring & turnbuckle * 15-pin electrical connector * Four lashing pocket sockets per side (no stakes included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear slope section) * Widening planks stored in the middle of the loading area * Excavator boom rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator boom rest) * Hydraulic, one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable, lateral ramp displacement * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- technically permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized Iedpfxjx Ipbgj Aicsau * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. week 36/2026

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: Iaodpfxjx Nlkao Aicsu * Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Fittings: * Aluminum air reservoir * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included * 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included) * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with transverse brace * Maximum drum weight per support 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling ----Loading height: * Approx. 1,040 mm when loaded ----Coating: * Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized * Axles painted in a black shade

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) Ijdpfx Ajpk D I Aeiceau ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Moving-off aid for shunting, connected to the first axle via EBS (no installation required on the truck side) * Last axle as self-steering trailing axle with electro-pneumatic lock * Trailing axle lock for shunting purposes, activated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Landing gear at front, swing supports at rear of the chassis * Straight steel fenders * Spare wheel carrier in front of front wall crossmember (spare wheel not included) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connection lines from truck to trailer ----Low Loader Deck: * 2nd kingpin position * Saddled platform with 45° chamfered front corners and front toolbox made from galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high drop-down/removable aluminium sideboards (custom RAL color) on saddle platform * Removable 150 mm high rear wall * Rear inclined ramp of approx. 700 mm at the end of saddle platform to low-bed deck, fitted with checker plate and lashing bar for attaching aluminium approach ramps * Saddle platform with 50 mm tongued-and-grooved timber floor, low-bed platform with 60 mm tongued-and-grooved timber planks * Tread plate above axles * 9 x mechanical folding extensions to 3 m overall width, but not on rear ramp (extension planks included with lockable transverse storage compartment under load area) * Preparation for 3 ramp storage compartments under saddle platform for either aluminium ramps or timber planks for wheel trough covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated external frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point, minimum spacing 480 mm) * 3 x 13.4 t recessed tie-down rings per side (1 on saddle platform, 1 on main longitudinal beams after the step, 1 above the center axle beside the beam) Low-bed Deck: * 3 x 13.4 t tie-down rings per side on outer frame (1 at the start of the gooseneck, 1 at the start of the rear ramp, 1 at the end of the ramp) * 2 x 10 t tie-down rings per side (1 between front wheel-well and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t tie-down rings per side, bolted to the outer frame of wheel wells (2 at front, 1 at rear wheel well) ----Digger Arm Rest: Iajdsykx Nqspfx Aiceu * Extended digger arm rest from end of last fixed axle over steering axle to end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D at rear

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Air suspension with lifting and lowering function * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring system with display option in the truck via EBS signal—no installation required on the truck side * 15-pin power connector * LED lighting * Front support winch * Rear external fold-out supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the front wall * Side underrun protection * Plastic quarter mudguards * 50 mm softwood flooring * Provisions in front of the front wall and at the rear for retrofitting 20" container locks * Bolted front wall made from flat sheet * Trapezoidal-profile, drop-down steel side walls, centrally divided once * Sliding steel rear wall between the ramps, mounting bracket for storage inside in front of the front wall when not in use * Bolted rear post/stake * Perforated external frame, bent at approx. 45 degrees, with 2-ton lashing capacity every 480 mm * Installation of 3-ton folding lashing brackets possible every 600 mm—4 lashing rings installed on each side * 1 x 6.3-ton lashing ring at each of the front and rear corners * "Profifix" lashing rail centrally in the longitudinal axis for lashing options up to LC 3,000 daN * Various boreholes in the front and rear cross member for 1.2-ton lashing options Iaedpfol Th Dfex Aiceu * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach ramp approx. 860 mm * Chassis, drawbar, front wall, tailgate, fold-out supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, flange drawbar eye, and support winch painted black * Side wall paintwork in an RAL color of your choice (excluding special or metallic paints), color can be changed up to approx. 6 weeks before completion * --Reinforced and certified body according to EN 12642 XL, incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 31 / 2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment by draw spring & turnbuckle * 15-pin electrical connector * Four lashing pocket sockets per side (no stakes included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear slope section) * Widening planks stored in the middle of the loading area * Excavator boom rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator boom rest) * Hydraulic, one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable, lateral ramp displacement * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm Iaedpfx Aijx Ipb Hscsu * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- technically permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. week 36/2026

Stanje: novo, največja dovoljena obremenitev: 9.070 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, Leto izdelave: 2026, * ETS-TA-B 11,9: * Wabco EBS (elektronski sistem kočenja) * RDÜ (nadzor pritiska u gumama) * Bubanj kočnice, 2 x 5,5 t Gigant osovine * Parabolične opruge sa izjednačivačem opterećenja * Vučno vratilo podesivo po visini oko 300 mm * BPW podupirač * Mehaničke zadnje noge za podršku * Plastična kutija za alat napred desno na čeonoj stranici * Bočna zaštita od podletanja * LED rasveta * Pod od 50 mm mekog, četinjastog drveta * U uglovima ispred čeone stranice i završnog nosača po 1 x 6,3 t hvatište za vezivanje, kao i po 2 UVV prstena za vezivanje po 6,3 t ugrađena sa strane u spoljašnji ram * Jednodelne mehaničke rampe od rešetki sa oprugom za rad jednom osobom, dimenzije oko 2.350 x 870 mm (unutrašnje rastojanje 20 mm, rampe nisu pomične) * Čeona stranica, bočne stranice, blatobrani i vučno vratilo toplo pocinkovani * Osovine, opruge, vazdušni rezervoar, prednji podupirač obojeni u crno * Novo vozilo sa punom garancijom proizvođača * Greške i međuprodaja zadržani Iajdpfx Aewyhzpeiceu * Dostupno od oko 35. nedelje 2026.

Stanje: novo, največja dovoljena obremenitev: 6.810 kg, skupna masa: 9.600 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * EK 9.6 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange-Type Towing Eye: * Drawbar as central axle drawbar with 40 mm screw-in towing eye * Continuously adjustable drawbar height with spindle lifting mechanism instead of fixed drawbar ----Coupling Height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal - no installation needed on the truck side Iasdpfxow Ndr Uj Aicou * 15-pin power socket * LED tail lights * Flashing side marker lights ----General Attachments: * Front support winch * Closed plastic mudguards * Foldable underrun protection for pavers ----Chassis: * Chassis made from fine-grain steel ----Tipper Body: * Pallet - 3-way tipper body * 700 mm steel front wall * Asymmetrical aluminium side walls - continuous without centre stanchion - folding with overtravel catches and swinging via manual central locking * 800 mm high steel tailgate with automatic opening when tipping rearward * 4 mm Hardox 450 steel floor ----Load Securing: * Two pairs of 3 t folding lashing brackets recessed into the steel floor on each side ----Painting: * Chassis, drawbar, underrun protection hot-dip galvanized * Painting of the tipper body in a RAL colour of your choice (no special or metallic paints) can be changed up to approx. 6 weeks prior to completion ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 42/2026

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RAK 18.0 External Roller with Rear Tipping Function ----Brake System: * Wabco EBS-E (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brake is disengaged) ----Drawbar: * Pneumatically lowerable drawbar approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General Attachments: * Plastic toolbox – approx. 858 x 500 x 500 mm – mounted on the right side * Enclosed plastic mudguards front & rear axles * Enclosed side underrun protection * Rear underrun protection bolted * Storage box for container nets made of galvanized perforated sheet approx. 1,000 x 500 x 500 mm * Foldable "A"-sign at the rear * Rear impact protection buffers ----Electrics / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 15-pin 24V power connector * LED lighting system for 12 & 24V * Two additional LED reversing lights * TPMS (Tire Pressure Monitor System) ----Suitable for Container Lengths: * suitable for containers from 6500mm to 7000mm ----Container Running Surface / Tipping Bridge: * External roller guide through flat steel rails with a clear width of approx. 2,180 mm combined with three lateral centering pieces on each side for container guidance * To support and stop the container rollers, two rear, recessed, tipping frame-mounted roller bearings with pneumatically operated longitudinal securing are supplied * The positive locking of roll-off containers is accomplished via a front-installed, externally controlled, pneumatic cross clamping unit (one-sided operation) * Inner chassis with rearward-tipping main frame - engine hydraulically powered tipping device (single-cylinder design) Iedpfx Aex Ipbmeicoau * Tipping angle 42° * Rubber pads between chassis and tipping frame * Containers are loaded from the front, hot-dip galvanized chassis ----Tyres: * Single tyres 385/55 R 22.5 ----Loading Height: * Unladen approx. 1,270 mm ----Paintwork: * Underrun protection and locking parts (without final coat) * Bogie, air tanks, axles, slewing ring and drawbar painted in black tone * Hot-dip galvanized ----Information: * For container transport according to DIN 30722 Part 1 * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale * Sample images (vehicle images may differ due to optional equipment) ----Delivery Time: * Available from week 24/2026

Stanje: novo, največja dovoljena obremenitev: 20.500 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lower system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN (trailing axle lock for maneuvering purposes—no truck-side installation—assigned to PIN 10 in the 15-pin connector, for shunting purposes only, not for use on public roads) * SmartBoard control box as an info tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, mm height adjustment at head plate) * Mechanical support windlass at the front, mechanical swing supports at the rear of the chassis * Mechanically adjustable warning sign package at the front and rear Iaedpfsr Dpz Aex Aicou * Toolboxes made of galvanized sheet steel—black powder-coated—approx. 650 x 300 x 600 mm on the right side * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the access ramp * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon with holder and installation * 2 x LED reversing lamps at the rear of the vehicle (controlled by reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir timber floor * 400 mm steel front wall plug-in * Perforated outer frame approx. 45-degree angled with provisions for 3 t folding lashing brackets * In each corner, 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various holes in the front and end cross-members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically laterally adjustable * 4-way hydraulic control block for possible retrofit of hydraulic ramp lateral adjustment * Chassis, drawbar, front wall, mechanical rear supports, loading ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange towing eye, and front support windlass painted in black tone * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of more than 40 ltr up to 120 ltr/min) * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (Electronic Braking System) * Emergency release mechanism for spring brake cylinders * Drum brakes * 2 x 7 ton Gigant axles * Air suspension with lifting and lowering device * Tow bar height-adjustable by approx. 300 mm * Tow bar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required Iajdpfsl Thvxsx Aicju * 15-pin electrical connector * LED lighting * Front landing gear * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted on the front right exterior bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provisions for subsequent installation of 20" container locks in front of the bulkhead and at rear * Bolted smooth steel sheet bulkhead * Side walls made of trapezoidal-profile steel sheet, center-folding, divided once * Rear steel panel insertable between ramp mounts; storage inside at bulkhead when not in use * Bolted rear stanchions * Perforated outer frame approx. 45° angled, lashing points (2 t lashing capacity) every 480 mm * Optional installation of 3 t drop lashing brackets every 600 mm – four lashing rings installed per side * One 6.3 t lashing ring in each front and rear corner * Profifix lashing rail along the longitudinal axis center, for lashing capacity up to LC 3000 daN * Various holes in front and rear crossmember for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear driving slope approx. 860 mm * Chassis, tow bar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, drawbar eye, and landing gear painted black * Side wall paint in desired RAL color shade (no special or metallic finishes), modifiable up to about 6 weeks before completion * -- Reinforced and certified bodywork according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from approx. week 31/2026

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Last axle is a trailing steering axle with electro-pneumatic steering lock, activated by PIN in reverse gear * Additional lock for the trailing axle operated from the tractor unit for shunting purposes – no installation necessary on the truck side – assigned to PIN 10; the lock must be deactivated before driving on public roads ----Suspension: * Air suspension with raise and lower function and Ride-on-Road (RtR) feature ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck's display via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as an info tool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for extended-length lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing legs * Galvanised sheet steel mudguards * Swivel arm as carrier for connecting lines in front of the front panel ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm floor covering made from larch / Douglas fir instead of spruce / fir * Rear bevel – 700 mm long – on the semi-trailer platform to the low-bed section with checker plate covering, and at the end a perforated strip for attaching aluminum approach ramps * Tread plate covers over the wheels * SP combo package: toolbox with 45° corners made from galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, located on the semi-trailer platform approx. 2,480 x 500 mm * Folding lid on top as well as side doors in the angled corners * Foldable aluminum side boards 500 mm high on the semi-trailer platform, including foldable and removable rear stanchions * Inserted aluminum rear wall, 150 mm high * Second kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach bevel from the low-bed to the gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding the mounting brackets into the outer frame ----Load Securing: Semi-trailer platform: * In the front corners and front, 50 mm drilled holes for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor on the sides towards the approach slope * Perforated outer frame, 45° folded with hole pattern for lashing points (2 t lashing points every 480 mm) * On each side, 2 x 6.3 t retractable lashing rings recessed in the outer frame Iedpfjykx I Hsx Aiceau Low-bed platform: * 2 x 16.5 t lashing rings centrally positioned directly in front of the approach ramp to the gooseneck and recessed * On each side, 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings recessed in the outer frame * On each side, 4 stake pockets recessed in the outer frame * Profifix lashing rail in the center along the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From the end of the last rigid axle to the rear crossmember, W = 770 mm, D = 270 mm (on each side, 2 x 6.4 t lashing rings solid welded in the excavator arm rest) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum approach ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs Iedpfxjx Ipavs Aicjau * Mechanical rear axle compensation * Side underrun protection * Rear swivel supports on chassis frame * Mechanically adjustable warning panel sets front and rear * Front closed plastic fenders and rear straight galvanized steel skirts, each with splash protection * Contour tapes on sides and rear, reflective * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Tow bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets each side (no stakes present) with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant lashing rings - swiveling and retractable, loadable in all directions and integrated in the outer frame – 13.4 t at the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not on rear taper) * Widening planks stored in the center of the loading platform * Excavator arm rest over rear axle up to the rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings fitted laterally in the arm rest) * Mechanically operated one-piece loading ramps with spring assembly (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, tow bar, and loading ramps hot-dip galvanized * Axles, springs, air tank, etc., painted in black * 235/75 R17.5 twin tires * 5,900 kg curb weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf