Stas S300Zx, 91M³, Lift, Wabco Smartboard, Frontluke nakup rabljenega (23.426)

Stanje: rabljeno, konfiguracija osi: 3 osi, barva: siv, Leto izdelave: 2008, Oprema: ABS, Stas S 339 CX Letnik izdelave: 2008 Zračno vzmetenje 3-osni Ponjava 2 x podporni nogi Polkrožni prekucnik = Dodatne informacije = Lastna teža: 6.800 kg Nosilnost: 32.200 kg Dovoljena skupna masa: 39.000 kg Codpfsydavxsx Agljrc

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2008, Stas S 339 CX Letnik: 2008 3-osni Zračno vzmetenje Ponjava 2 x opori Lastna teža: 4.890 kg Največja dovoljena masa: 39.000 kg = Dodatne informacije = Lastna teža: 4.890 kg Nosilnost: 34.110 kg Csdpfxoyc U Uae Aglsrc Skupna dovoljena masa: 39.000 kg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2013, dolžina tovornega prostora: 8.400 mm, širina tovornega prostora: 2.390 mm, višina nakladalnega prostora: 1.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 1.310 mm, Leto izdelave: 2013, Dimenzija pnevmatike: 385/65R22,5 Vzmetenje: zračno vzmetenje Pogon: kolo Lastna teža: 5.590 kg Crodpfx Aswzkx Tsglsc Nosilnost: 33.410 kg Skupna dovoljena masa: 39.000 kg Znamka nadgradnje: STAS Kiper: zadaj

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 5.222 h, številka stroja/vozila: B195-02-6078, vrsta goriva: dizel, Lastna teža: 12.400 kg Csdpfoymi Ucjx Agljrc Dvižna zmogljivost: 500 kg Delovna višina: 2.150 cm Stanje pnevmatik spredaj: 60% Stanje pnevmatik zadaj: 60% Transportne dimenzije (D x Š x V): 4,73x2,44x3,65 m Za več informacij se obrnite na PFEIFER GROUP.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2008, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 50 m³, Chassis ALU chassis, aluminum alloy 5383H34 Two fully automatically welded T profiles (width 200 mm) Corrosion protection between steel and aluminum parts, continuous rubber bonded under pressure to the longitudinal beams, maximum stability with integrated tipping bearing shaft fitted with wear-resistant special bushings, chassis width approx. 1,600 mm, air and electrical lines integrated inside a plastic tube. Axles and Suspension Disc Brakes Jost disc axle assemblies 3 x 9 tonnes with DCA air suspension system, raising and lowering valve, load pressure gauge, third axle automatically liftable. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5, approx. 50-60% tread remaining, on silver steel rims, size 11.75x22.5 ET 120. Cedpfjxf Spfsx Aglorc Landing Legs Mechanical landing gears, load capacity 2 x 20 tonnes, with pivoting feet for use with air suspension systems. Brake System According to E.G. standard, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, Wabco EBS-E system 2S/2M with RSS (Roll Stability Support), ALU air reservoir. Electrical System According to StVZO regulations with 2 five-chamber Aspöck LED taillights, 24-volt system with two 7-pin and one 15-pin front sockets, EBS socket, side LED outline markers, 2 clearance lights, 2 separate LED reversing lights. Tipping Body/Tipper Body Aluminum tipper body, side walls with welded vertical aluminum profiles, approx. 6 mm floor of highly wear-resistant aluminum alloy (5383H34), Brinell HB 110, sloping front wall of 4 mm aluminum with reinforcing profiles for tipping cylinder bracket, side walls 3 mm hard alloy, straight rear wall, automatic pneumatic (lockable) universal tailgate with pendulum and wing door (2/3-1/3 split), with double hinge, made of 4 mm aluminum, single grain discharge slide with water protection, wear plates on the side approx. 400-1,000mm x 3,000mm x 4mm. Hydraulic System Hydraulic cylinder mounted on front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2m hydraulic hose and loose half 1". Accessories 6 Parlok plastic mudguards with 2 Stas mudflaps, 3 m aluminum ladder, reinforced collapsible underrun protection with 2 towing eyes, one foldable side guard, walkway on bulkhead with left-hand access ladder, 3 ALU bows with swing function, one central additional bow holder, roll tarp with central ALU tube, roll tarp system, tarp material quality approx. 660g/m², tarp fastener with quick-release catch (no tension straps), wheel wrench, 2x wheel chocks, toolbox type 800, continuous spray guard fitted on underrun protection, etc. Offer and pictures non-binding.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2017, dolžina tovornega prostora: 10.550 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 50 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension, Disc brakes 430 mm “off-road version” SAF-Intradisc axle units 3 x 9 t with SAF air suspension, airbags centrally positioned to chassis longitudinal beam, 1st axle liftable with start-up aid and manual forced lowering, Smart Board Infocenter, raise/lower valve, 3rd axle with trailing steering, electrically lockable. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5, approx. 40-50% tread, with Alcoa "satin" aluminium rims 11.75 x 22.5 ET 120, UNI wheel bolts for aluminium rims. Landing Legs Mechanical version, single-side operation with two speeds, swing foot for air suspension, 2x20t support load. Cedpfx Agjxf Sn Islerc Braking System According to EU standard, two-line Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll-Stability-System), Wabco Smartboard Infocenter, aluminium air reservoir system. Electrical System According to German Road Traffic Licensing Regulations (StVZO), with two five-chamber lamps type Aspöck Ecopoint 2, 24V system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear. All air and electrical lines are neatly routed in plastic conduit. Tipping Body / Tipper Body, Inside Fully Welded Aluminium tipper body, sidewalls 30 mm thick plank profiles (2-3 mm), 600 mm wide, fully welded. Floor 8 mm wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight; rear wall double-leaf door, straight, with two doors in 1/2-1/2 design, each with a grain chute. Air vibrators under the floor with pneumatic operation, rear spreader made from aluminium, pivoting, two hold-down devices with rubber buffers on the tipper body fixed to the front wall frame. Hydraulic System, Tipping Cylinder with “Cardan” Suspension, 7,630 mm lift Hydraulic cylinder mounted on front wall, working pressure 220 bar, brand Hyva, 220 bar, approx. 2.5 m hydraulic hose and loose 1" half coupling, tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, full-width spray flaps on underrun bar, ALU spare wheel holder, foldable right side underrun protection, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swinging bows, raised approx. 150 mm in centre, tarpaulin with central light strip and separate reinforcement in wear areas, approx. 660 g/m2 quality, with rolling tarpaulin system, circumferential rubber cord at rear closure with two tension hooks to be fixed to rear swing bow, walkway at tipper body with access on left, side tarpaulin closure with tension straps, rear tarpaulin closure with welded-in rubber cord for water protection, robust foldable aluminium underrun protection with two towing eyes left & right incl. locking pins, 2 “Clear-Pass” mud flaps on wheel arch to EU standard, etc. Offer and photos subject to change.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2021, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 53 m³, Chassis, Light Version Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width 1,600 mm. Axles and Suspension Disc brakes 430 mm, "off-road version" SAF Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, centrally mounted to the chassis longitudinal beam, 1st axle with liftable air bellows, starting aid function and manual forced lowering, Smart Board info center, lowering valve, front load pressure gauge. Tyres and Wheels on Aluminum Rims 6 wheels with tires 385/65 R 22.5 approx. 50%, 11.75 x 22.5 ET 120, UNI wheel bolts for aluminum rims. Kingpin 2" screwed into an 8 mm thick "light" plate Landing Legs Support winches, loadable to 2x20 t, with swiveling base for air suspension Brake System Built according to E.G. standards, dual-line Wabco system, spring-actuated parking brake affecting two axles, Wabco EBS-E with RSS (roll stability system), Wabco Smartboard Info Center, aluminum air tank system. Electrical System According to STVZO guidelines, with 3 round three-chamber lamps type Aspöck, 24V system with 2 x 7-pin and 1 x 5-pin sockets, 2 x 7 side outline markers, 2 LED reversing lamps centrally at the rear, 1 round fog lamp, 4 LED work lamps, 1 interior LED lamp, 4 red LED position lamps in the door bar. All air and electrical lines are neatly routed in plastic tubing! Tipper Body / Body “Smooth Design”, Body Interior Fully Welded Aluminum tipper body, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide, welded. Floor 8 mm high-wear-resistant alloy (5383H34/HB 110) with 90-degree profile to the side wall. Front wall 4 mm reinforced, straight design. Tailgate as universal door, straight version, with two half-and-half swing doors and grain chute. Universal door operated automatically-pneumatically, lockable via separate lever, rear portal in aluminum, swing-away, two hold-downs with rubber buffers on the tipper body, fixed to the front wall. Crodpeyiw T Esfx Aglsc Hydraulics, Tipping Cylinder with “Sleeve” Suspension Hydraulic cylinder mounted on the front wall, working pressure 150 bar, Edbro make, with approx. 2.5 m hydraulic hose and quick coupling 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete splash flaps across full vehicle width mounted on underrun protection, no aluminum spare wheel holder, side underrun protection right, foldable version, large toolbox type 860, approx. 3 m aluminum ladder, 3 aluminum swing bars mid, approx. 150 mm raised with additional middle support, roll tarp with central light strip and separate reinforcements in wear areas, approx. 660 g/m² quality, roll tarp system with fast tension closure, surrounding rubber cord at rear edge of tarp with two catch hooks to be fixed on the rear swing bar, catwalk on frame, tarp closure at rear with welded-in rubber cord for water ingress protection, robust foldable underrun protection, 2 "Clear-Pass" mud flaps to EG standard mounted on mudguards, side-mounted on the frame an aluminum grain funnel with drawstring bag, brackets for shovel, broom, and scraper mounted over axles, etc… Unladen weight: 5,950 kg Offer and images subject to change.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 93 m³, Chassis Design with reinforced continuous chassis, newly constructed bodywork in a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members: reinforced version, 140 mm high (for heavy ground loads). Additional reinforcement as gusset plates in the front lower belt/vehicle frame area. Chassis made of galvanized steel up to the support structure (trailer design max. 39,000 kg). Axles and Suspension: 'Disc brake 22.5' Jost (DCA) axle units, 3x9 tons with DCA air suspension, lift and lower function, Wabco Smartboard info center, electronic brake wear indicator (BVA readable on the tractor unit display), 1st axle with traction aid (new EU regulation, without tractor unit equipment), (optionally 1st + 3rd axle can be liftable). Cedjyh S Aispfx Aglerc Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 from selected manufacturers (Br-Go-Co) on silver steel rims, 11.75 x 22.5 ET 120. Landing Legs Mechanical landing legs with two speeds, 2x 20 t support load with swiveling foot. Braking System In accordance with EC standard – EBS electronic system by Wabco with RSS (Roll Stability Support) and premium modulator. Spring-loaded brake system acting on two axles with control at the rear. ALU air-tank system. Electrical System According to EC directives 91/633 and 97/28 with two Aspöck Europoint 3 five-chamber lamps integrated into the ALU rear closure, 24V system with 1x 15-pin and 2x 7-pin sockets, LED side marker lamps, two reflective plates on the rear, position lights front 2x white, rear 2x red, two separate LED reverse lights integrated into underrun protection. Body/Tipping Body – Fully Welded Inner Structure Reinforced side walls: front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminium tipping body: side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper belts. Plank profiles inside fully welded. Floor with moving floor system laid on 140 mm ALU cross-members. Floor load capacity approx. 9 t/m2, cross-members closely spaced (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3mm thick, straight design. Special ALU corner profiles in chamfered design. Smooth rear wall in straight version with two ALU swing doors, 50/30 mm thick, with 2 bar locks mounted in welded ALU rear frame, with Teflon and stainless steel bearings. Doors secured when opened with one chain each side. Hard-wearing wear plates on side walls approx. 2,000x1,500x4 mm, fully welded. Residual discharge wall with Kevlar tarpaulin approx. 1,800 mm length plus side Kevlar seal. Service door in front wall with inward-turning ladder. Hydraulic System “Cargo Floor” Moving Floor System Moving floor system in the floor with hydraulically operated ALU profiles on ALU box beams, approx. 880 PE-HD slides plus anti-lifting slide bearings. Type CF, 10 mm floor version, hydraulics with approx. 200 mm stroke. Fixed halves at the front wall, separate option for connecting hydraulic line under the vehicle with fixed halves, pipe size NW 21, fixed halves with size and type to be specified. Operating pressure 190–max. 240 bar, ALU end pieces welded into the moving floor. Electric operation on the rear left with radio control integrated into a lockable, waterproof box, without hydraulic hoses. Accessories 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection.

Stanje: novo, največja dovoljena obremenitev: 28.320 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, Chassis: Design with continuous frame, newly manufactured in self-supporting aluminum construction with appropriate reinforcements in the lower flange for particularly high stability and strength, crossmembers with a height of 140 mm in reinforced design (for high ground load), additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brakes 22.5, Jost (DCA) axle assemblies, 3x9 ton capacity with DCA air suspension, raise/lower function, Wabco Smartboard Info Center, electronic brake wear indicator (BVA, can be read out in the tractor unit display), first axle with start-assist function (new EC regulation, without tractor unit equipment), (first and third axle liftable on request at extra cost). Tyres and Wheels: 6 wheels with tires size 385/65 R 22.5 of manufacturer’s choice (Br-Go-Co) on silver-painted steel rims, 11.75x22.5 ET 120. Kingpin: 2-inch, bolted into a 10 mm thick mounting plate. Landing Gear: Mechanical landing legs with two speeds, 2x 20-ton support capacity with swivel foot. Brake System: According to E.C. regulations, EBS electronic braking system by Wabco with RSS (Roll Stability Support) and premium modulator, spring-type parking brake on two axles operated from the rear, ALU air reservoir system. Electrical System: In accordance with EC Directive 91/633 and 97/28, with 2 five-chamber lamps (Aspöck Europoint) integrated into the ALU rear end, 24-volt system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 reflective warning plates at the rear, position lights at the front (2x white), rear (2x red), 2 separate halogen reversing lights integrated into underrun protection. Body/Tipper Body: Fully welded interior, reinforced side walls, front wall load 17,250 daN, side and rear walls 13,400/10,400 daN. Aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2–3 mm), 600 mm wide, completely welded with lower and upper flange, inside profile joints fully welded; floor as walking floor system laid on 140 mm aluminum crossmembers, floor forklift load approx. 9t/m², crossmembers spaced closely (approx. 350 mm), special angled aluminum corner profiles, flat straight rear wall with 2 aluminum swing doors (50/30 mm thick) with 2 locking rods, fixed into the welded ALU rear frame with Teflon and stainless steel bearings; doors secured when open by a chain at each side; hard wear plates welded to side walls, approx. 2000x1500x4 mm; moving residual discharge wall with Kevlar tarp approx. 1800 mm long plus lateral brushes and Kevlar side-sealing; service door in front wall with interior-folding ladder. Csdpofi Nmwefx Agljrc Hydraulic System: Walking floor system in the floor with hydraulically operated ALU profiles on ALU square sections with approx. 880 PE-HD gliders plus anti-lifting slide bearings, Type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed halves at the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and type to be specified, operating pressure 190–max. 240 bar, ALU end caps welded into walking floor, electric controls on left rear with remote control in a lockable waterproof box, hydraulic hoses not included. Accessories: 6 PVC mudguards with 2 antispray mud flaps, 6 PVC splash guards above the wheels, 1 ALU spare wheel holder, side ALU underrun protection

Stanje: rabljeno, številka stroja/vozila: YE6SZ339V600R0459, konfiguracija osi: 3 osi, prva registracija: 07/2006, dolžina tovornega prostora: 13.350 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.750 mm, skupna dolžina: 13.950 mm, skupna širina: 2.500 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: drugo, Leto izdelave: 2006, Oprema: ABS, = Más opciones y accesorios = - Hidráulica = Notas = Chasis Altura del chasis: 100 cm Altura del perno de acoplamiento / barra de tiro: 120 cm Estructura Hidráulica: ✓ Depósito Combustible: ✓ = Más información = Configuración de ejes Tamaño de neumáticos: 385/65 R22.5 Marca de ejes: Mercedes Frenos: Frenos de disco Suspensión: Suspensión neumática Eje 1: Perfil neumático izquierdo: 65%; perfil derecho: 10% Eje 2: Perfil neumático izquierdo: 75%; perfil derecho: 15% Eje 3: Perfil neumático izquierdo: 70%; perfil derecho: 15% Pesos Peso en vacío: 7.960 kg Carga útil: 31.040 kg Peso bruto: 39.000 kg Funcional Carrocería: Stas Altura de la plataforma de carga: 110 cm Identificación Matrícula: QAZ297 = Información de la empresa = Para más información sobre esta unidad, por favor llame o envíe un correo electrónico a: . Credpfoyq R Ryox Aglec Puede consultar el inventario completo en: . No olvide suscribirse a nuestro boletín para recibir actualizaciones semanales sobre nuestro stock.

Stanje: rabljeno, največja dovoljena obremenitev: 32.550 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2016, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 30 m³, skupna širina: 2.550 mm, skupna višina: 3.350 mm, Oprema: ABS, Stas S300CX Crsdpfx Agjyf Sf Uolec Prva registracija: 25-08-2016 Aluminijasto šasijo / Jeklena keson SAF osi s kolutnimi zavorami, ABS in EBS Zračno vzmetenje Smartboard Serijska številka: YE6S300CXG0001112 Pnevmatike: 385/65 R22,5 35% Skupna masa: 39.000 kg, Lastna masa: 6.450 kg, Nosilnost: 32.550 kg Preklopna zaščita proti podletu Kesa: D-8,50 m, Š-2,35 m, V-1,50 m = 30 m3 Izdelano za ADR homologacijo Pridržujemo si pravico do napak/napisnih napak in vmesne prodaje.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 40 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle lift with traction aid and electric operation, raise & lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" king pin bolted into a 10mm plate, mechanical landing gear with single-side operation, braking system per EEC standard, Westinghouse two-line system, spring brakes on two axles and EBS electronic system Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per StVZO with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, Edbro hydraulic system with approx. 2m hydraulic hose, 6 PVC mudguards with rubber mud flaps, lateral underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber seal, spindle locks on the tailgate, prepared for vibrating plate, mud-tight! Csdpfx Ageu Dvw Ejlerc ADDITIONAL EQUIPMENT AVAILABLE TO ORDER AS REQUESTED COLOR FREELY CHOOSABLE +590€ delivery costs *Pictures and offers non-binding*

Stanje: novo, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.535 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, prostornina tovornega prostora: 92 m³, Oprema: ABS, - Panama sheet 900g - 10 mm floor - V-sheets 2000x1500x4 - Service door in the bulkhead - 12 pairs of lashing rings in the bulkhead Chassis: Reinforced continuous frame design, new body manufactured in self-supporting construction with corresponding reinforcements in the lower flange for exceptionally high stability and strength, crossmembers 140 mm high in reinforced version Axle and Suspension: Disc brakes 22.5"? Jost axle assemblies, 3 x 9 tons with DCA air suspension, lift and lower function, Wabco Smartboard, electronic brake pad wear indicator (BVA), 1st axle with traction aid (without tractor unit configuration) Tyres and Wheels: 6 wheels with premium tyres size 385/65 R 22.5 on steel rims, 11.75 x 22.5 ET 120 Landing Gear: Mechanical landing legs, 2 x 20 t support load Brake System: Wabco EBS E-system with RSS (Roll Stability Support) and premium modulator, spring-actuated parking brake on two axles, operated from the rear Electrical System: In accordance with EU directive 91/633 and 97/28, with two five-chamber lights Aspöck Europoint type integrated in ALU rear, 24 Volt system with 1 x 15-pin and 2 x 7-pin sockets, with side marker lights (LED), 2 separate LED reversing lights integrated in underrun protection Body / Tipper Body: Fully welded interior, reinforced side walls. Aluminium tipper body, side walls 30 mm thick aluminium plank profiles (2–3 mm), 600 mm high, fully welded with top and bottom rails, plank profiles fully welded inside, alu bulkhead with 600 mm plank profile, 2–3 mm thick, straight design, with 2 ALU swing doors 50/30 mm thick, movable residual discharge partition with Kevlar sheet, approx. 1,500 mm long plus side Kevlar tarpaulin seal Hydraulics: 'Cargo Floor' moving floor system, hydraulically operated aluminium floor profiles laid on alu square profiles, with approx. 880 PE-HD sliders, type CF, 8 mm floor, fixed ends at bulkhead, separate option to connect hydraulic line under vehicle with fixed ends, operating pressure 190 – max. 240 bar, ALU end caps welded in moving floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray flaps, 1 ALU E-wheel holder, side alu underrun protection, foldable, 1 tool box approx. 860 x 460 x 400 mm in plastic, 3.7m aluminium ladder, roll tarp approx. 660g/m² with roll tarpaulin system incl. roller bar, either with side tension belts or with quick fastener, catwalk on bulkhead with access ladder, 3 steel bows with swing-out and lockable latches, alu protective cover with hinges foldable for lights, etc. +€590 delivery costs Credpfx Agjfi Nmpslsc Unladen weight: approx. 7,700 kg Offer and pictures subject to confirmation

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.500 mm, prostornina tovornega prostora: 87 m³, Chassis Manufactured as a self-supporting ALUMINIUM structure with appropriate reinforcements in the lower chord for particularly high stability and strength. Aggregated chassis made of ALUMINIUM, frame height 140 mm (max. 39 t), axles and suspension: disc brakes 22.5", Jost axle units 3 x 9 ton with DC air suspension, lifting and lowering function. Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor equipment). 1st and 3rd axles separately liftable with starting aid (without tractor equipment), 3rd axle additionally with Optiturn, ECAS air suspension. Tyres and wheels 6 wheels with 385/65 R 22.5 tyres, manufacturer’s choice, on Alcoa aluminium rims, satin finish, 11.75x22.5 ET 120 (with steel equivalent approx. 120 kg). Cjdpfxjgcw Ris Aglsrc Landing legs Aluminium drop-leg supports, manufacturer: Alu-Leg, 2 x 10 t support load, with swivelling feet for air suspension. Brake system According to E.E.C. standards, dual-circuit braking system, Wabco EBS E system with RSS (Roll Stability Support), spring-loaded parking brake acting on two axles with control at the rear, aluminium air tank system, premium modulator. Electrical system According to StVZO regulations with 2 Aspöck Europoint III five-chamber rear lights integrated into the ALU rear profile, 24 V system with 1x 15-pin and 2x 7-pin sockets, with LED side marker lights, 2 work lights at the rear, 2 LED work lights on the sides at the height of the landing legs, 1 LED work light inside front left, operable from the outside. Body/tipper body – "Body fully welded inside" Front wall load: 17,250 dkn. Rear and side walls: 10,250/13,400 dkn. Aluminium tipper body, side walls made from 30 mm thick ALU plank profiles (2–3 mm) 600 mm wide, fully welded to lower and upper chords, inside fully welded plank profiles! Floor built as moving floor system on 140 mm ALU cross members, forklift load approx. 7 t/m², closely spaced cross members (approx. 350 mm), ALU front wall with 600 mm plank profile 2–3 mm thick, straight design, special ALU corner profiles, bevelled design. Smooth tailgate in straight design with 2 ALU swing doors, 50/30 mm thick with 4 locking rods, welded in ALU rear frame, mounted with Teflon and stainless steel bearings, travelling ALU wall suspended in reinforced ALU top chord with "Kevlar tarp" for complete evacuation, lateral brush seal and additional Kevlar side tarp, integrated discharge funnel with folding cover plate at the rear left, accessible from outside, rear left viewing window, one sample shutter in each rear door (total 2 pieces), service door left in the front wall. Hydraulic system – "Cargo Floor" 24 board system – smooth finish! Moving floor system in the floor with hydraulically operated ALU profiles on ALU box sections with approx. 880 PE-HD skids, approx. 8 mm floor thickness, hydraulic stroke approx. 200 mm, rigid connections at the front wall, separate hydraulic line connection from under the vehicle with fixed halves, pipe size NW 21, fixed halves with specified size and design to be confirmed, operating pressure 190–max. 240 bar, aluminium end pieces welded into the floor, opening rear left with cable control in a lockable watertight box, without hydraulic hoses. Accessories PVC mudguards with rubber mudflaps, ALU spare wheel holder, foldable side ALU underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m Alu ladder, 680 g/m² tarpaulin with roller system including side quick release.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.880 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle with lift, traction aid, and electric operation, raising and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" kingpin bolted into a 10 mm thick plate, mechanical landing gear with unilateral operation, braking system according to EEC standards, two-line system, spring actuators acting on two axles, EBS electronic brake system by Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system in accordance with StVZO regulations, 2 five-chamber tail lights (Aspöck type), 24-volt system, aluminum tipper body, Edbro brand hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side underrun protection, rear underrun protection, catwalk on the frame, fully welded, continuous sealing rubber, spindle locks on the rear door; tipper body optionally also available with mud-tight seal! Combination tailgate, split 2/3-1/3, with grain chute and automatic pneumatic locking. FURTHER EQUIPMENT AVAILABLE ON REQUEST COLOR FREELY CHOICEABLE +€590 delivery costs Also available in versions Z9-Z13 Cedpfx Asu Dvw Sjglerc *Images and offers subject to change*

Stanje: novo, največja dovoljena obremenitev: 28.840 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.660 mm, širina tovornega prostora: 2.250 mm, višina nakladalnega prostora: 2.350 mm, prostornina tovornega prostora: 50 m³, Oprema: ABS, STRONG & LIGHT, now also available for heavy-duty applications, from 40 m³ loading volume and 6,600 kg. High-quality aluminium chassis with high-strength steel body, ACTUAL 7,160 KG. Chassis with 3x 9t DCA axles, equipped with 430 mm disc brakes, 6x steel rims, 1st axle as a lift axle with starting aid, aluminium drop-down landing legs (can be decoupled when loaded), foldable underrun protection, digital load gauge for axle load indication, toolbox, access ladder. Body made from HB450 steel sheets, floor 5 mm thick, side walls and rear doors made from 4 mm HB450 steel sheets. Rear doors split 1/2 - 1/2 with a grain chute on the right, rear doors can be unlocked from the rear, doors sealed with round steel bar (optionally with rubber seal – mud-tight), roll tarp with central support tube, aluminium splash guard to protect the roof tarpaulin during loading, platform mounted on the frame, EdBro tipping cylinder with long casing, loading height = 3,650 mm. (The vehicles shown are partly equipped with special options) Further equipment details and a comprehensive vehicle quotation are available upon request. Various loading volumes, vehicle lengths, and heights are possible. Painting and equipment according to customer specifications. +€500 delivery charge Offers and images are subject to change. Codpfjhfiqcex Aglsrc

Stanje: novo, največja dovoljena obremenitev: 30.050 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.664 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 52 m³, Leto izdelave: 2025, Braking System: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes * Brake pad wear indicator (not connected) ----Axles: * 3 x 9 t SAF axles * 1st and 3rd axles are automatic lift axles, controlled via the EBS-E system ----Suspension: * Air suspension with lifting and lowering function (automatic lowering during tipping – can be manually blocked via SmartBoard or by switch on the chassis) ----Electrics / Lighting: * Tire pressure monitoring system (Wabco Trailerpulse) * Wabco Smart-Board * Start assist activated via button in the truck – no truck-side installation required – as well as by pressing the brake pedal three times * 2 x 7-pin and 1 x 15-pin sockets * Aspöck LED lighting * 2 LED reversing lights (activated via reverse gear) * 1 LED work light each on the side at the support legs ----General Equipment: * Aluminum air tanks * Weweler crank landing gear * Side underrun protection * Folding underrun guard with handle * Speedline Diamond aluminum rims * 1 x plastic toolbox on left side approx. 860 x 520 x 500 mm * Air blow gun with 16 m hose reel in toolbox * Closed single plastic mudguards * 1 dust bag incl. holder on right side * 3m aluminum ladder stored on right above mudguards * Shovel and broom holders on left above mudguards * Load pressure gauge mounted at the front of the chassis * Access steps and standing platform mounted at the front of the frame ----Chassis: * Aluminum chassis frame ----Tipping Body: * Aluminum rear tipping trough – rectangular – with smooth side walls * Hyva hydraulic ram, 250 bar * Straight 4 mm aluminum front wall * Steps mounted on inside of the left front wall of the body * Smooth side walls inside and outside * Double-walled 600 mm sidewall profiles – 30 mm thick – 3 mm inside and 2 mm outside * Side wall profiles continuously welded inside, 90° corners with right-angled profile between floor and side walls – ensures the full floor width can be used * Top rail 90 mm wide * 6 mm wear-resistant aluminum floor with 110 Brinell quality * Combination double-wing rear doors – upright, with double hinges and reinforcement profiles, each with grain shoot and all-round rubber seal * When doors are open, they are fixed by chains to lie flat against the side walls * Fourfold lower door locking hooks automatically open during tipping – can be pneumatically locked using valve on the frame ----Roll Cover: Crjdjwgg Uzepfx Aglsc * Roll tarp – in RAL 9005 deep black – with three side tension belts * Trapezoidal tarp support 150 mm high on front wall and rear tailgate ----Load Volume: * Load volume 51.8 m³ ----Fifth Wheel Height: * Fifth wheel height 1,150 mm ----Info: * Superstructure and chassis painted with acrylic paint in RAL 9005 deep black * --Permissible gross weight of 39,000 kg technically possible-- * New vehicle without initial registration, with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, Leto izdelave: 2006, številka stroja/vozila: N165.00.6100, Lastna teža: 7.985 kg Dvižna zmogljivost: 500 kg Delovna višina: 1.850 cm Stanje sprednjih pnevmatik: 80 % Stanje zadnjih pnevmatik: 80 % Transportne mere (D x Š x V): 3,74 x 1,2 x 3,4 m Codpfx Ajyhlifoglorc Za več informacij se obrnite na PFEIFER GROUP.

Stanje: rabljeno, največja dovoljena obremenitev: 33.370 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2014, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 30 m³, skupna širina: 2.550 mm, skupna višina: 3.160 mm, Oprema: ABS, Stas S300CX izolirani asfaltni kiper Crsdsx Txmijpfx Agloc Prva registracija MB osi z disk zavorami, ABS in EBS Zračno vzmetenje Smartboard Serijska številka: YE6S300CXD0001049 Pnevmatike: 385/65 R22,5 35% Skupna teža: 39.000 kg, lastna teža: 5.630 kg, nosilnost: 33.370 kg Delovni podest Ročna ponjava 3x žitna zaporna loputa Poklopna zaščita proti podletu Box: D-8,50 m, Š-2,35 m, V-1,50 m = 30 m3 Izdelano za ADR homologacijo Pridržujemo si pravico do napak/tipkarskih napak in vmesne prodaje.

Stanje: rabljeno, Leto izdelave: 2001, obratovalne ure: 5.026 h, 2001 | Holland-Lift B195-DL25 (21m reach) | Used Scissor Lift Table | 5026 hours 📍 Location: Estonia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 9,600 or Make an Offer. Cjdpfx Aoyq H Sysglsrc Payment upon delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 40 inspection points: 32 approved ✅ 7 imperfections ℹ️ 1 issue ⚠️ 📌 Inspector's Note: Issues with the left front stabilizer, engine does not accelerate, play in the right steering linkage, all other functions operational. 📄 Want to see the full inspection report, extra photos, or a video? Tip: The reference "38100 Equippo" is commonly used when searching for further details online. 💡 Why choose this machine and our service: ✔ Comprehensive inspection by professionals ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Looking for other equipment? We provide practical tools and resources for all equipment owners and operators – easily accessible on our platform.

Stanje: rabljeno, Leto izdelave: 2007, 2007 | Holland-Lift Q 135 El 24 (15 m) | Used Scissor Lift Table 📍Location: Estonia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Crjdpfjyq I Nyex Agloc 💰 Buy now for EUR 8,900 or make an offer. Payment upon delivery available for a small fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points: 26 approved ✅ 6 imperfect ℹ️ 0 urgent repairs ⚠️ 📌 Inspector’s comment: The hour meter is defective, and the fender near the drive motor is bent. The drive motor is in good condition, and all functions are working except for the leveling sensor, which malfunctions occasionally. The customer defrosted the remote control and charged the batteries before the inspection. 📄 Want to see the full inspection report, extra photos, or a video? Tip: The reference "38110 Equippo" is commonly used when looking up more details online. 💡 Why choose this machine and our service: ✔ Comprehensive inspection by professionals ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 1.197 h, 2014 | Holland-Lift N195-12EL 21.40 m | Used Scissor Lift Table | 1,197 operating hours 📍 Location: Estonia 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 22,500 or Make an Offer. Payment upon delivery available for a reasonable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 31 inspection points, 31 approved ✅ 0 imperfections ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Crjdpfx Agjyq Ictsljc Given the machine’s age, all components and functions are operating as expected; no major defects or anomalies were identified during inspection. 📄 Want to see the full inspection report, extra photos, or a video? Tip: The reference "38107 Equippo" is often used when searching for more detailed information online. 💡 Why this machine and our service stand out: ✔ Thorough inspection by professionals ✔ Delivery direct to your jobsite ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer a range of useful tools and resources for equipment owners and operators – all easily accessible on our platform.

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 2.201 h, številka stroja/vozila: B195.03.7090, vrsta goriva: dizel, Lastna teža: 11.990 kg Dvižna zmogljivost: 500 kg Delovna višina: 2.150 cm Stanje sprednjih pnevmatik: 60 % Crjdpfxjycpq Ne Agloc Stanje zadnjih pnevmatik: 60 % Transportne dimenzije (D x Š x V): 4,84x2,44x3,65 m Za več informacij se obrnite na skupino PFEIFER.

Stanje: rabljeno, Leto izdelave: 2012, obratovalne ure: 787 h, številka stroja/vozila: HL9714-00-7199, Lastna teža: 2.740 kg Dvižna zmogljivost: 325 kg Cedpfx Aowg Rbfeglerc Delovna višina: 1.200 cm Stanje prednjih pnevmatik: 40 Stanje zadnjih pnevmatik: 40 Transportne dimenzije (D x Š x V): 2,49x1,45x2,49 Za več informacij se obrnite na PFEIFER GROUP.

Stanje: rabljeno, Leto izdelave: 2012, številka stroja/vozila: HL9714-00-7200, Lastna teža: 2.740 kg Dvižna zmogljivost: 325 kg Delovna višina: 1.200 cm Crsdowly N Nspfx Aglsc Stanje sprednjih pnevmatik: 60 Stanje zadnjih pnevmatik: 60 Transportne mere (D x Š x V): 2,49x1,45x2,49 Za več informacij se obrnite na PFEIFER GROUP.