Müller-Mitteltal Zandt Tat -B 110 Pritsche Tandem Nl 9,4To nakup rabljenega (32.429)

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes Gjdpfxox Ipbgs Ap Eeud * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment by draw spring & turnbuckle * 15-pin electrical connector * Four lashing pocket sockets per side (no stakes included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear slope section) * Widening planks stored in the middle of the loading area * Excavator boom rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator boom rest) * Hydraulic, one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable, lateral ramp displacement * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- technically permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. week 36/2026

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (Electronic Braking System) * Emergency release mechanism for spring brake cylinders * Drum brakes * 2 x 7 ton Gigant axles * Air suspension with lifting and lowering device * Tow bar height-adjustable by approx. 300 mm * Tow bar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * 15-pin electrical connector * LED lighting * Front landing gear * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted on the front right exterior bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provisions for subsequent installation of 20" container locks in front of the bulkhead and at rear * Bolted smooth steel sheet bulkhead * Side walls made of trapezoidal-profile steel sheet, center-folding, divided once * Rear steel panel insertable between ramp mounts; storage inside at bulkhead when not in use Guodpfxjl Thvxo Ap Ejd * Bolted rear stanchions * Perforated outer frame approx. 45° angled, lashing points (2 t lashing capacity) every 480 mm * Optional installation of 3 t drop lashing brackets every 600 mm – four lashing rings installed per side * One 6.3 t lashing ring in each front and rear corner * Profifix lashing rail along the longitudinal axis center, for lashing capacity up to LC 3000 daN * Various holes in front and rear crossmember for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear driving slope approx. 860 mm * Chassis, tow bar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, drawbar eye, and landing gear painted black * Side wall paint in desired RAL color shade (no special or metallic finishes), modifiable up to about 6 weeks before completion * -- Reinforced and certified bodywork according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from approx. week 31/2026

Stanje: novo, največja dovoljena obremenitev: 20.500 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TR 27.0 Flatbed: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lower system featuring RTR function * 1st axle liftable * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN (trailing axle lock for maneuvering purposes—no truck-side installation—assigned to PIN 10 in the 15-pin connector, for shunting purposes only, not for use on public roads) * SmartBoard control box as an info tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flange towing eye (loaded 900 mm, mm height adjustment at head plate) * Mechanical support windlass at the front, mechanical swing supports at the rear of the chassis * Mechanically adjustable warning sign package at the front and rear * Toolboxes made of galvanized sheet steel—black powder-coated—approx. 650 x 300 x 600 mm on the right side * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the access ramp * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * 15-pin electrical connector * LED tail lights * Removable LED beacon with holder and installation * 2 x LED reversing lamps at the rear of the vehicle (controlled by reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir timber floor * 400 mm steel front wall plug-in * Perforated outer frame approx. 45-degree angled with provisions for 3 t folding lashing brackets * In each corner, 1 x 10 t lashing ring, plus 2 x 10 t and 3 x 6.3 t lashing rings on each side * Various holes in the front and end cross-members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically laterally adjustable * 4-way hydraulic control block for possible retrofit of hydraulic ramp lateral adjustment * Chassis, drawbar, front wall, mechanical rear supports, loading ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange towing eye, and front support windlass painted in black tone Gujdpor Dpz Aofx Ap Eod * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck of more than 40 ltr up to 120 ltr/min) * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.810 kg, skupna masa: 9.600 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * EK 9.6 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange-Type Towing Eye: * Drawbar as central axle drawbar with 40 mm screw-in towing eye * Continuously adjustable drawbar height with spindle lifting mechanism instead of fixed drawbar ----Coupling Height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal - no installation needed on the truck side * 15-pin power socket * LED tail lights * Flashing side marker lights ----General Attachments: Guedpjw Ndr Uofx Ap Eod * Front support winch * Closed plastic mudguards * Foldable underrun protection for pavers ----Chassis: * Chassis made from fine-grain steel ----Tipper Body: * Pallet - 3-way tipper body * 700 mm steel front wall * Asymmetrical aluminium side walls - continuous without centre stanchion - folding with overtravel catches and swinging via manual central locking * 800 mm high steel tailgate with automatic opening when tipping rearward * 4 mm Hardox 450 steel floor ----Load Securing: * Two pairs of 3 t folding lashing brackets recessed into the steel floor on each side ----Painting: * Chassis, drawbar, underrun protection hot-dip galvanized * Painting of the tipper body in a RAL colour of your choice (no special or metallic paints) can be changed up to approx. 6 weeks prior to completion ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 42/2026

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RAK 18,0 z zunanjimi valji in funkcijo kipanja nazaj ----Zavore: * Wabco EBS-E (elektronski zavorni sistem) * Zasilni sprostitveni sistem za vzmetno-zavorne cilindre * Bobnaste zavore ----Os: Gjdpfex Ipbmex Ap Eoud * BPW Eco Plus osi ----Vzmetenje: * Zračno vzmetenje (samodejno spuščanje ob odklopu zavore) ----Vlečna škarja: * Pnevmatsko nastavljiva vlečna škarja dolžine cca 2.100 mm z vlečno ušesko 40 mm in nastavitvijo višine preko vlečne vzmeti in natezne matice ----Splošni priključki: * Plastična orodjarna - cca 858 x 500 x 500 mm - desna stran * Zaprta plastična blatnika spredaj in zadaj * Zaprta stranska zaščita pred naletom * Zadnja podvozna zaščita pritrjena z vijaki * Prostor za shranjevanje mrež za zabojnike iz pocinkanega perforiranega pločevine cca 1.000 x 500 x 500 mm * Zložljiv A-ščit zadaj * Zadnji zaščitni odbijač proti naletu ----Elektrika / Osvetlitev: * EBS večnapetostni sistem za vlečna vozila z 12 in 24 V elektriko * 15-polni 24 V električni priključek * LED svetlobni sistem za 12 in 24 V * Dodatna 2 LED vzvratni žarometi * RDÜ nadzorni sistem tlaka v pnevmatikah ----Primerno za dolžino kontejnerjev: * za zabojnike dolžine 6.500 mm do 7.000 mm ----Drsna površina za kontejner / nagibna ploščad: * Vodilo valjev zunaj z ravnim jeklom z razmikom cca 2.180 mm v povezavi s tremi centrirnimi kosi na vsaki strani za vodenje kontejnerja * Za namestitev in zaustavitev kontejnerskih valjev sta na zadnji strani nameščena dva poglobljena z okvirjem nagibne ploščadi povezana ležaja valjev s pnevmatsko varnostjo proti zdrsu v vzdolžni smeri * Zapiranje kontejnerjev na valjih poteka preko v okvir nagibne ploščadi vgrajene in zunaj upravljane pnevmatske prečne zapiralne enote (upravljano z ene strani) * Notranji okvir podvozja z nagibnim glavnim okvirom nazaj - motorno-hidravlični nagibni sistem z eno cevjo * Kot kipanja 42° * Gumijaste blazinice med šasijo in nagibnim okvirjem * Natikanje zabojnika spredaj, podvozje vroče cinkano ----Pnevmatike: * Enostavne pnevmatike 385/55 R 22,5 ----Višina nakladanja: * neobremenjeno cca 1.270 mm ----Barvanje: * Podvozna zaščita in zapiralni deli (brez zaključnega laka) * Vrtljivi nosilec, zračni rezervoarji, osi, obračalni obroč in vlečna škarja barvani v črnem odtenku * Vroče cinkano ----Informacije: * za transport zabojnikov po DIN 30722 del 1 * Novo vozilo brez prve registracije z garancijo proizvajalca * Pridržujemo si pravico do napak in vmesne prodaje ----Dobavni rok: * takoj na voljo iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization Gedsx Ipb Hjpfx Ap Eoud * Side underrun protection * Swing supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment by draw spring & turnbuckle * 15-pin electrical connector * Four lashing pocket sockets per side (no stakes included) with simultaneous lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and embedded in the outer frame - 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear slope section) * Widening planks stored in the middle of the loading area * Excavator boom rest over rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator boom rest) * Hydraulic, one-piece drive-on ramps (approx. 3,000 x 720 mm) * Hydraulically adjustable, lateral ramp displacement * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black shade * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- technically permissible gross weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from approx. week 36/2026

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar, 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring system with display capability in the truck dashboard via EBS signal - without truck-side installation - * 15-pin power connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun guard ----Platform Bed: * Zurr-fix outer frame, 45° edged with hole pattern for lashing equipment, lashing force per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – as standard, each side fitted with 12 x 3,000 kg lashing rings * Each side with 5 sockets for stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanised drum supports secured via container locks, with lateral forklift pockets, centre-to-centre 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clearance between support arms approx. 1,775 mm, with crossbeam * Maximum drum weight per cable drum support: 6,000 kg * Without drive and without drum brake * Support arm with locking device for securing drum shaft * 76 mm diameter steel drum shaft with centring and rotatable ends * 2 set collars * 2 centring cones made of polyamide * 4 x 3.2 t lashing eyes on support arms for customer-side securing of drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm loaded ----Coating: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted Gjdpfx Aox Nlkgep Ejud ----Delivery Time: * Available from approx. CW 51 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, TRA-Kombi 18.0: * 3-in-1 solution: suitable for roll-off containers, skip containers, and as a low-loader ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrical / Lighting: * Tire pressure monitoring system (TPMS), display capability in truck via EBS signal (no truck-side installation required) * LED rear lights 12/24 V * 15-pin power connector ----General Attachments: * Tool box made of powder-coated sheet steel * Spare wheel carrier (basket type) on the right side * Closed side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffers * Foldable A-sign at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel deck with recessed rollers in the bogie area * Can transport roll-off containers with a container length of 5,500 – 7,000 mm * Pneumatic 4-point clamp locking and mechanical plug-in stop angles at the front of the guide track * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * Includes 8 repositionable bin stops for lateral centering of the skips, front 4 stops plug-in with pivoting stop * Weld bead as anti-slip coating in the ramp area of the track Gusdpewb Rakofx Ap Eed * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for securing with tensioning elements, 4 cloverleaf-type lashing brackets per side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t recessed lashing eyes per side in the outer frame ----Ramps: * Aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Additional Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egstorf

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * First inspection (ETÜ) - TA -R 14.4 ----Brake System: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar by approx. 300 mm - drawbar extension by 250 mm to 2,250 mm total length * 40 mm flange-type towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * 15-pin electrical connector * LED rear lights 12 / 24 V * Removable LED beacon at rear ----General Attachments: * Landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, externally mounted on the front right end wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Preparation in front of the bulkhead for later installation of container locks * Bolted smooth steel bulkhead * Foldable steel side walls with trapezoidal profile, with drop-side spring assist * Removable steel rear wall, stowable inside at the front of the bulkhead when not in use * Bolted rear stanchions * Rear ramp bevel approx. 860 mm Gedpfxox Ipbae Ap Ejud ----Flooring: * 50 mm softwood flooring * 12 mm thick and 270 mm wide rubber strips on the inside of the loading ramps * 12 mm thick and 210 mm wide rubber strips on the ramp bevel and on the exterior of the low loader platform (from front bulkhead to rear cross member) ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various drillings in the front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring assistance for single-person operation, approx. 2,750 x 870 mm (collapsible to 20 mm thickness) ----Paint Finish: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air tanks, and flange eye painted in black * Side walls painted in RAL 9010 pure white ----Information: * Reinforced and certified superstructure according to EN 12642 XL, including load securing certificate * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery time: Vehicle is immediately available ex Eggerstorf

Stanje: novo, Leto izdelave: 2026, New model, now with 9,900 kg gross weight! Guedpeyyhb Nofx Ap Esd Cable drum transport trailer. Permissible total weight 9,900 kg, payload approx. 7,000 kg (standard equipment). Hydraulic lifting and lowering of the cable drum from the towing vehicle or via separate engine (4-stroke petrol; 8.1 kW; electric start) with weather protection cover. Hydraulic drum drive with rubber-coated drive rollers. Drum diameter 800–3,000 mm, drum width up to approx. 1,650 mm, centering cones for cable drums. Two-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tires 315-80R22.5, tire pressure monitoring. 40 mm adjustable towing eye, dual-line air brakes, LED lighting 12+24 V. Toolbox, advertising panels in the side underride protection. Fully hot-dip galvanized chassis. New vehicle including factory warranty. Available from approx. calendar week 26-2026. (Archive photos) = Further Information = Unladen weight: 2,900 kg Payload: 7,000 kg gross weight: 9,900 kg Front tires: 315-80R22.5 Country of manufacture: DE Please contact Jan-Marc Schwickert for more information.

Stanje: rabljeno, največja dovoljena obremenitev: 19.800 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, Oprema: ABS, * Müller Mitteltal 3-osna prikolica za zabojnike za odpad * Tip TM 2 24 Gjdjyx R Enspfx Ap Ejud * Za dva zabojnika za odpad od 7 do 10 m³ * Zavarovanje tovora s samo dvema verigama na zabojnik * Dvojne pnevmatike 265/70 R19,5 * Zračno vzmetenje * BPW osi * Vrtljivo vlečno uho pnevmatsko znižljivo s pnevmatskim sproščanjem * 8 UVV pritrdilnih obročev 5t za pritrditev napenjalnih elementov * 8 premakljivih omejevalnikov zabojnikov za bočno centriranje zabojnikov * EBS * Tehnično dovoljena skupna masa 27.000 kg

Stanje: novo, največja dovoljena obremenitev: 6.900 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Electrical / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting * Flashing LED side marker lights ----Drawbar / Flanged towing eye: * Drawbar with 40 mm bolt-on towing eye (height adjustable in mm) ----General attachments: * Support winch at front * Spring-assisted square tube supports at rear with base plate, safety lock pins for various support heights * Enclosed steel fenders with splash guards * Enclosed side underrun protection, can be used as advertising space * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock for drum securing at the ends of the support arms, as well as latching of the cable drum superstructure to the chassis via a centrally located claw lock * Motor-driven hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of centering cones made of polyamide, stepwise offset * Preparation of steel construction and hydraulics for retrofitting an auxiliary engine ----Chassis: * Chassis made of torsion-resistant square sections and cross-members ----Hydraulics: * Hydraulic lines for supply and return ----Tyres: * 315/80 R 22.5 tires Gsdpfx Ajxyniwjp Ejud ----Painting: * Vehicle is hot-dip galvanized ----Info: * 2,690 kg curb weight * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Reference number for enquiries: 31943-O * NEW VEHICLE – soon available in your desired color. Müller-Mitteltal KA-TA-R 11.9 Tandem Low-bed Three-way Tipper Trailer with Ramps * Tyres: 385/55 R19.5 (4 units), BPW axles, parabolic springs, drum brakes * GVW: 11,900 kg, payload: 8,750 kg * Tyre pressure monitoring with in-cab display via EBS signal * EBS instead of ABS, 24 volts * EBS multi-voltage system for 24V and 12V vehicles (e.g., tractors) * Side marker lights with indicator activation * LED lighting system for 12V and 24V Gsdpezbfmksfx Ap Eoud * 2 additional LED reversing lights * Floor galvanized, 5m x 2.42m, 0.5m side walls, laser-welded, swinging, folding, and removable * Prepared for retrofitting sidewall extensions later * Lockable compartment under the tipping body for the drive-on ramps * Incl. aluminium ramps, 8t load capacity, 3.57m long, stowed in ramp compartment under tipper body * Floor and front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN front and rear + 8 recessed and foldable lashing eyes LC 3000daN evenly distributed in tipper floor * Drawbar infinitely height-adjustable, hot-dip galvanized, 40mm towing eye * Mesh hooks * Bolt-on, galvanized rear stanchions * Excavator bucket rest mounted on the front wall * One plastic toolbox, mounted right-hand side of chassis frame * Step in front of front wall ---- * We are Müller-Mitteltal authorized dealer ---- * Request a quote from us! * e.g. from €545 net/month for 60 months, no down payment, no residual value. An offer from our financing partner FM LeasingPartner ---- Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside opening hours, available by appointment We speak German, English, Polish, and French WhatsApp Leasing, financing, and trade-in possible.

Stanje: rabljeno, največja dovoljena obremenitev: 10.080 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 08/2017, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, prostornina tovornega prostora: 6 m³, Leto izdelave: 2017, Oprema: ABS, Stock št. 5820 Müller-Mitteltal 3-stranski tandem jekleni kiper priklopnik / aluminijaste rampe / pocinkovano podvozje / široke pnevmatike! ---- * Proizvajalec: Müller-Mitteltal * Tip: KA-TA-R 13,5 * Prva registracija: 08/2017 * Skupna masa: 13.500 kg * Lastna masa po prometnem dovoljenju: 3.420 kg * Nosilnost: 10.080 kg * Osi: 2 x Gigant / bobnaste zavore * Vzmetenje: listnato vzmetenje * Pnevmatike: 385/55 R 19.5 približno 50% na jeklenih platiščih * Tehnični pregled: 08/2026 * EBS * Barva: podvozje pocinkano, kiper nadgradnja modra * Prostornina kiperske kadi: približno 6 m³ (5,00 m dolžina x 2,42 m širina x 0,50 m višina) * izvlečne aluminijaste rampe * vlečna kljuka s 50 mm ušesom, nastavljiva po višini * kiper nadgradnja s 4 pari zložljivih pritrdilnih ušes v tleh * nosilec za polno obremenitev spredaj * dodatne zložljive opore zadaj Gusdpfezdm S Sox Ap Eed * predal za orodje iz nerjavnega jekla spredaj desno * četrtinski blatnik * certifikat za varovanje tovora * vozilo iz prve roke Nemški priklopnik!! Nemški dokumenti!! Prva lastništvo!! Opomba o morebitnih napakah v oglasu: Kljub skrbni pripravi oglasa lahko pride do posameznih napak v besedilu ali podatkih. Ne prevzemamo odgovornosti za napake, spremembe ali vmesno prodajo. Vse informacije so brez garancije. Prosimo, da nas kontaktirate za preverjanje podrobnosti ali dodatna vprašanja.

Stanje: rabljeno, največja dovoljena obremenitev: 13.640 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2019, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.500 mm, HU: NOVO Skupna masa: 18.000 kg/20.000 kg Lastna masa: 4.360 kg Nosilnost: 13.640 kg/15.640 kg Dodatne informacije - dvojna kolesa 235/75R17,5 - osi Gigant - 4 pari pritrdilnih obročkov - pnevmatska zapora - znižljivo podvozje - nakladalne rampe pribl. 2.300 mm v prostor za shranjevanje - zadnja podporna noga Gujdpfxjyw Ep Se Ap Ejd - skladiščna omarica - zaščita proti podletu

Stanje: rabljeno, največja dovoljena obremenitev: 27.300 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2013, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 11.700 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Oprema: ABS, * Gugalnica z zaboji za shranjevanje * Sledilne krmiljene osi * Hidravlične nakladalne rampe * Razširljiva nizkopodna ploščad ----* Dimenzija pnevmatik: 235/75R17,5 * Tehnična skupna masa: 42.000 kg * Lastna teža: 8.700 kg * Skupna dolžina: 13.150 mm * SP veljavnost do: 02/2027 ----Številka vozila: 12148 ----Možne napake in vmesna prodaja pridržane ----Oglasi in različni napisi so bili digitalno odstranjeni. Gsdpfsza Rlijx Ap Ejud -----Z veseljem vam pomagamo pri vseh formalnostih, ki nastanejo ob nakupu vozila – sporočite nam vaše želje in predloge ter za vse ostalo bomo poskrbeli mi. Med drugim vam lahko za doplačilo ponudimo naslednje storitve: ----Odkup vašega starega vozila TÜV/SP tehnični pregled Popolna izvozna obdelava Posredovanje financiranja Urejanje izvoznih tablic Prevoz vozil Registracija vozil Reševanje in transport vozil ----VAŠ VTS TEAM

Stanje: rabljeno, največja dovoljena obremenitev: 38.230 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2026, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Müller-Mitteltal nizkopodna prikolica z vdolbinami za kolesa TS 3 RM ML 30,0, 2 višini nakladanja in rampe * Povečanje vertikalne obremenitve sedla iz 12 t na 18 t vklj. Montiran sedelni zatič v: drugi poziciji sedelnega zatiča 2", sedelni zatič do vključno krivljenja 2.750 mm. Zadnji polmer zasuka ca. 2.400 mm v svetli odprtini (priporočamo prosti prostor min. 150 mm). Sprednji polmer zasuka 1.480 mm oz. 1.570 mm z rezervnim kolesom. Opomba: Dovolj prostora do vlečnega vozila mora zagotoviti stranka. * Izvlečni deli za vdolbine za kolesa spredaj in zadaj spodaj (205 mm globoko). 6 kos desk za vdolbine za kolesa z nosilcem kot ležišče v skladu s kodo 09.112 ALU-tlačni zračni rezervoar namesto jeklenega * Smartboard upravljalna omarica kot infotool nameščena na prikolici z tlačnimi senzorji za prikaz skupne obremenjenosti osi. Prikaz možen na upravljalni omarici ali v tovornjaku preko EBS-zračnega vzmetenja (odvisno od proizvajalca tovornjaka) * ?SP-kombi paket: Orodjarna z 45° vogali iz pocinkanega jekla, dodatno prašno lakirana v RAL 9006 bela aluminij, na sedlarski platformi B=2.480 x V=500 mm z zgornjim preklopnim pokrovom, stranskimi vrati in poševno. ALU stranske stene zložljive na sedlarsko platformo (500 mm visoko), ALU zadnja stena vstavna (150 mm visoko), notranje in zunanje ALU stranice lakirane v RAL 9006 bela aluminij. Vklj. zložljivi & snemljivi zadnji stebri, pocinkani (brez zaključnega premaza). Vključuje vijačeno sprednjo konstrukcijo. Dolžina sprednjega okvirja do krivljenja 3.935 mm Sprednji polmer zasuka, brez rezervnega kolesa z dimenzijo krivljenja 2.450 mm oz. 2.750 mm ca. 1.750 oz. ca. 1.480 mm * 2 kosa ležišč za fiksiranje kontejnerjev, vgrajeni v sprednji okvir * 3 ležišča pod sedlarsko platformo za shranjevanje izbirnih ALU ramp ali lesenih desk za prekrivanje vdolbin za kolesa * Zložljivo/izvlečno konzolo (pocinkana) in lesene deske za širitev vklj. (ne na zadnji poševnini), nosilec desk na sedlarski platformi (največja širina tovora največ 2.500 mm) * Druga LED pozicijska luč v opozorilnem paketu spredaj in zadaj (dvojna osvetlitev), le v povezavi z opozorilnim paketom * 2 LED vzvratni žarometi na zadnji strani prikolice, prižgana v vzvratni prestavi (primerno za 12 V in 24 V), največ 2 dodatna kosa dovoljena * 7-polna vtičnica na zadnji strani, vezana za razsvetljavo za prekomerno dolžino z zadnjo lučjo (58 R) in maso * Gumijasta prevleka na nakladalni rampi levo in desno (ca. 860 mm dolžine) 190 07644 gumijasti trakovi, na notranji deski enodelnih ramp * Popolnoma avtomatski centralni sistem mazanja s črpalko (24V), rezervoarjem za mast ter integriranim upravljanjem prikolice, brez priklopa ramp (pri krmiljenju: vključno s priklopom razdelilnika na sedlarsko platformo). Opomba: Možno izključno za vlečna vozila z 24V razsvetljavo! Vmesna prodaja in napake pridržane! Prodaja izključno po naših Splošnih pogojih poslovanja. Pomembno obvestilo – Pomembna informacija: Kljub natančnemu preverjanju vseh podrobnosti v naši ponudbi se lahko pojavijo napake, ki so posledica prenosa med različnimi platformami. Zato opozarjamo, da so vse informacije brez garancije in ne predstavljajo pravne zahteve. Gujdpfxey R Ipus Ap Esd Pravno: Ta prodajni oglas ne predstavlja ponudbe v smislu §145 BGB, ampak informacijo za pripravo pogodbe. Tukaj navedeni podatki so brez garancije in ne predstavljajo zagotovljenih lastnosti.

Stanje: rabljeno, največja dovoljena obremenitev: 6.800 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, prva registracija: 06/2026, Leto izdelave: 2026, Müller-Mitteltal KWH 9,9 ML prikolica za prevoz kablov z dizelskim motorjem * KWH 9,9 ML * Bobnasta zavora, zavorni sistem EBS 2S/2M * BPW osi * Listnato vzmetenje (parabolične vzmeti) * Vzmetno podprte štirikotne podporne noge zadaj z osnovno ploščo, varnostni zaskočni zatiči za različne višine podpor Guedpfx Apjy R Ipno Eed * Vlečna cev z 40 mm ali 50 mm privijačeno vlečno uho (nastavljiva po višini mm) * Nosilec za dodatno vlečno cev, nameščen na desni strani vlečne naprave v smeri vožnje * Podvozje iz torzijsko odpornih štirikotnih cevi in prečno postavljenih nosilcev * Plastična orodjarna * LED osvetlitev * Zavrtljiv nosilec bobna za kabel, sestavljen iz osnovnega okvirja, vrtljivih ležajev ter nosilnih ročic za boben * Konci nosilnih ročic z napenjalnim zapahom za varovanje bobna * Zaklepanje vrtljivega nosilca bobna s podvozjem preko centralno nameščenega kavljičnega zaklepa * Jeklena os bobna premera 76 mm z usmerjanjem in vrtljivimi konci * Pri premeru bobna 3.000 mm je možna maksimalna širina bobna 1.650 mm * Motorno-hidravlično gnani vlečni in potisni cilindri z ventilom za zadrževanje obremenitve * Krmilni ventil z avtomatsko povratno pozicijo v ničlo ter tlačnim varovalnim ventilom * Priključki, cevi in cevi hidravličnega sistema v NW 13 * Potrebni volumen olja približno 10 litrov * Pogon bobna motorno-hidravličen z oljnim motorjem, ventili in gumiranimi pogonskimi valji (nastavljivi); hidravlični regulator hitrosti in zavora za pogon bobna * Hidravlična črpalna enota z dizelskim motorjem in ročnim zaganjalnikom, 6,5 KM z zobnično črpalko (150 bar) * Dovod tlaka izmenično z vklopom priključnih cevi bodisi preko tovornjakove hidravlike bodisi črpalne enote * Pokrov kot zaščita pred vremenskimi vplivi, vroče pocinkan, brez zaključnega premaza * Pnevmatske gume 315/80 R22,5 Vmesna prodaja in napake so izrecno pridržane! Prodaja izključno po naših Splošnih pogojih poslovanja (AGB) Pomembno opozorilo – pomembna informacija: Kljub skrbnemu preverjanju vseh podrobnosti v naši ponudbi lahko pride do napak, deloma zaradi napak pri prenosu v sistemih različnih spletnih platform. Zato poudarjamo, da so vsi podatki brez garancije in ne predstavljajo pravnega zahtevka. Pravno: Ta prodajni oglas ne predstavlja ponudbe v smislu §145 BGB. Gre za informacijo za začetek pogodbenih pogajanj. Tu navedeni podatki so brez garancije in ne pomenijo zagotovljenih lastnosti.

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 02/1992, Leto izdelave: 1992, Oprema: ABS, Müller-Mitteltal Abrollanhänger Nemško vozilo = Dodatne informacije = Gedpoxt Sd Sefx Ap Esud Lastna teža: 3.140 kg Nosilnost: 14.860 kg Dovoljena skupna masa: 18.000 kg Prodajna cena: €1.500, US$1.747

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, Leto izdelave: 2026, RA-T 18.0: Loadable from front and rear ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * 19.5" disc brakes * Automatic braking when opening the cross-tension units ----Axles: * 2 x 10 t BPW wide-track axles ----Suspension: * Air suspension (automatic lowering when disconnecting the brake) ----Electrics / Lighting: * Tyre pressure monitoring with display in the truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting system with protective canopy * 2 LED reversing lights (activated by reverse gear) ----Drawbar: * Pneumatically lowerable drawbar, 1,800 mm long, with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General attachments: * Plastic toolbox 858 x 500 x 500 mm, right side * Storage box for container net made of galvanised perforated sheet, 1,000 x 500 x 500 mm, side mounted Guedpfx Asl Tn U Rop Eed * Enclosed plastic mudguards, front & rear axle * Enclosed side underrun protection (RAL 9010 pure white) suitable as advertising surface * Rear underrun protection * Plastic rear collision buffers * Foldable A-sign * Hazardous materials sign with accompanying document pocket and reflective parking warning panel at the rear ----Container area: * Additional front loading with rear runway lowering and plug-in stops * Roller depressions in the area of the turntable with mechanically adjustable stop angles (2 positions) at the front left and right on the tracks * Roll track length approx. 6,830 mm * Pneumatic 4-point clamp locking * For the transport of external roll-off containers according to DIN 30722 Part 1 – Dekra load securing certificate available ----Loading height: * Loaded approx. 1,130 mm ----Coating: * Chassis and locking parts hot-dip galvanised * Air tanks, axles, turntable and drawbar painted in black shade ----Information: * Permissible gross weight of 20,000 kg technically possible * New vehicle without first registration with manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery time: * Available from approx. KW 21/2026

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0: Gsdpfxjy Tr Hio Ap Esud ----Axles: * Gigant axles * Start-up aid for maneuvering purposes on the 1st axle (operated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle by an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping operation (can be deactivated via control unit in the driver's cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinder * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED tail lights 12 / 24 V with galvanized protective housing ----Drawbar / Flanged Towing Eye: * Drawbar with adjustable K80 ball hitch ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded, with raised tower for connection lines ----General attachments: * Support winch at the front * Bolted steel underride guard * Plastic quarter mudguards in front of the first and behind the last axle * Removable protective grille for rear lights (not permitted under StVZO regulations and must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * 3-way tipper body made of steel (fixed front wall, continuous side walls - without center pillar -, right side wall swinging via central locking and foldable with drop side spring assist) * Left side wall foldable with drop side hydromatics * Rear wall swinging with automatic hook locking * 5 mm steel floor made of HARDOX-450 steel or equivalent ----Load securing: * On each side 4 x 3 t lashing rings recessed in the outer frame, UVV-compliant ----Paintwork: * Axles, air tank, support winch, flanged towing eye painted in a black tone * Tipper body painted in a customer-specified RAL color (no special or metallic paint), can be changed up to approx. 6 weeks before completion * Chassis, protective grille for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery time: * The vehicle is still under construction and, barring any delays, will be completed in calendar week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start assist system for maneuvering on the 1st axle (controlled via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor * Automatic lowering of the air suspension when tipping (can be deactivated via control element in cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for tractors with 12V & 24V electrics * LED tail lights 12/24 V with galvanized protection box ----Drawbar / Flange towing eye: * Drawbar with K80 ball coupling, adjustable mm ----Coupling height: * Coupling height approx. 440 - 550 mm when loaded with raised tower for connecting lines ----General attachments: * Support winch in front * Bolted steel underride guard * Plastic quarter mudguards in front of the first and behind the last axle * Removable tail light guard (not permitted under StVZO, must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grain steel ----Tipping body: * 3-way steel tipper body (fixed front wall, continuous side walls without center stanchions, right side wall swinging via central locking and foldable with side wall spring-assisted lift, left side wall foldable with hydraulic side wall system) * Tailgate swinging with automatic hook locking * 5 mm steel floor made from HARDOX-450 steel or equivalent ----Load securing: * Each side with 4 x 3 ton UVV lashing rings recessed in outer frame ----Painting: * Axles, air tanks, support winch, flange towing eye painted in black * Tipper body painted in a RAL color of your choice (no special or metallic colors, changeable up to approx. 6 weeks before completion) * Chassis, tail light guards hot-dip galvanized ----Information: * Sample images ----Delivery time: Godpfxey Tr Hce Ap Eoud * Vehicle is still under construction and, assuming uninterrupted and steady production, will be completed in week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 11.050 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-loader Three-way Tipper Trailer with Ramps * NEW VEHICLE * Now immediately available in RAL 9016 Traffic White * Leasing, financing, and trade-in of your old trailer possible * Reference number for inquiries: 11654 * Remote diagnostic unit with display option in the truck via EBS signal * Side marker lights with indicator function * GVW: 14,400 kg, Payload: 11,050 kg * EBS 2S/2M * Galvanized floor, 5m x 2.42m x 0.5m, laser-welded drop sides, swinging, foldable, and removable, prepared for later retrofit of side extension panels * Lockable compartment under the tipping bridge for approach ramps * Incl. 1 pair of aluminium loading ramps, 8t per pair, 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lash rings LC 5000daN at front and rear + 8 lashing eyes LC 3000daN recessed and foldable in the tipper floor (centrally positioned) * Excavator bucket rest made of hardwood * 2-step access in front of front wall (hot-dip galvanized) * Drawbar infinitely height-adjustable, hot-dip galvanized, towing eye 40mm * Wide tires 385/55R 19.5 (4 units), parabolic springs * Net hooks, rear stanchions bolted, hot-dip galvanized * Cables for the rear drop side * Plastic toolbox on the right side of the chassis frame Gusdpjyvxg Isfx Ap Eed * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer * Hire purchase price: * e.g. €560 for 60 months with no down payment and no residual value. Offer from our financing partner "FM LeasingPartner." Other terms with/without residual value or down payment possible * Request your personal quote! * We are official Müller-Mitteltal sales partners * Delivery free to your site available with timely order! ----Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 We are also available by appointment outside of these hours We speak German, English, Polish, and French. WhatsApp

Stanje: rabljeno, največja dovoljena obremenitev: 31.820 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1980, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, skupna višina: 900 mm, Leto izdelave: 1980, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal T4 Low Loader Trailer * SAF axles with drum brakes * Twin tyres * Low bed with extendable loading platform * Hydraulic loading ramps, movable (2 units) * Drive-over gooseneck * Additional rear supports * Turntable construction ----Dimensions & loading area * Loading area approx. 9,800 mm * Loading width: 2,550 - 3,000 mm * Loading height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tyres: 235/75R17.5 ----Vehicle number: 11892----Subject to errors and prior sale----Advertising and various lettering have been digitally removed. -----We are happy to assist you with any formalities arising from the purchase of a vehicle. Simply let us know your requirements and suggestions, and we will take care of the rest. Among other things, we can offer you the following services at an additional cost: Gujdpfjy Skl Ijx Ap Eod ----Trade-in of your old vehicle TÜV/general inspection Complete export processing Financing brokerage Obtaining export license plates Vehicle transport Vehicle registration Recovery and vehicle transport ----Your VTS Team

Stanje: rabljeno, konfiguracija osi: 2 osi, skupna širina: 25.000 mm, skupna višina: 40.000 mm, Leto izdelave: 2014, Oprema: ABS, Za vprašanja v zvezi z vozilom je vam na voljo gospod Seidel (po telefonu). MÜLLER MITTELTAL SF32BM/BT betonska polprikolica Nadgradnja: Liebherr HTM 1004 10m³, osi BPW, bobnaste zavore, vzmetni akumulator, Wabco ABS, 1. os dvižna, zračno vzmetenje, dovoljena skupna masa: 32.000 kg, lastna masa: 6.510 kg, nosilnost: 25.490 kg, profil pnevmatik: 1. os 14-15mm, 2. os 10mm Po želji vam pripravimo ponudbo za leasing ali financiranje. Gospod Seidel vas z veseljem vodi po telefonu. Več informacij najdete na naši spletni strani. ... Napake, spremembe in vmesna prodaja pridržane!!! = Dodatne informacije = Gsdpsyfu Sdefx Ap Ejud Dovoljena skupna masa: 32.000 kg Za dodatne informacije se obrnite na gospoda Tobiasa Eberta.