Müller-Mitteltal Müller Ra nakup rabljenega (18.335)

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Braking System: * Without ABS/EBS, homologated for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: Bwjdpfsr Dpz Hjx Aqiep * Gigant axles ----Suspension: * Tandem-balance unit with 100 mm wide parabolic springs ----Drawbar Eye / Drawbar: * Rigid, welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm via mounting plate) with elevated gallows for connection lines ----Electrics / Lighting: * 12 V 7 + 4-pin power supply cable * LED lighting system, 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle, no vehicle-side installation required ----General Attachments: * Landing gear at the front * Mechanical drop legs at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Hot-dip galvanized two-step access steps in front of the bulkhead on the left (FR) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper Body: * Steel pallet three-way tipper body with M-Strong side boards (fixed front wall, continuous sides without central stanchions, swinging via manual central locking, plus mechanically folding with board spring lifters) * Hydraulic tailgate, 500 mm high, engineered as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * Each corner equipped with 1 x 7 t recessed folding lashing ring * Each side fitted with 4 x 3 t recessed folding lashing points ----Ramps: * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber and tracked vehicles * 2 recessed storage compartments for aluminum ramps in the rear of the chassis * Load securing compliant with EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Bodywork painted in RAL 9010 pure white * Chassis, drawbar, rear support legs, underrun protection hot-dip galvanized * Axles, air tanks, landing gear (front) * K80 coupling painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.750 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 21.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release system for spring-type brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lift and lower device ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Lighting / Electrics: * 15-pin power connector * LED lights, 12/24 V * RDÜ tire pressure monitoring system ----General Fittings: * Jost support winch at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Preparation at the front bulkhead and rear slope for retrofitting container locks for 20'' container transport * Version: 21 t gross vehicle weight with reinforced chassis and axles * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamped version * Preparation at the front bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Split sidewalls made of trapezoidal-profiled steel sheet, foldable with folding stakes in the center * Steel rear wall, insertable between the ramps (bracket provided inside the front bulkhead when not in use) * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Profifix lashing rail in the longitudinal center axis for lashing up to LC 3000 daN * One 10 t lashing ring in each front and rear corner * Lashing package: two retractable 8 t lashing rings on each side, multiple holes for 1.2 t lashing options in the front and rear crossmember ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single person operation, approx. 3,000 x 620 mm (can be closed down to 20 mm) * Rear drive-on slope approx. 860 mm (chassis) ----Loading Heights: Bwsdpfoq Dyu Uex Aqijp * Unladen: approx. 940 mm * Laden: approx. 910 mm ----Wheelbase / Tyres: * 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Side panels painted in an RAL color of your choice (excluding special or metallic paints), can be changed until about 6 weeks before completion * Drawbar, front bulkhead, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks and support winch painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and intermediate sale subject to confirmation * Sample photos ----Delivery Time: * Available from calendar week 29 / 2026

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required * Warning sign packages, front and rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V 15-pin as well as additional 12 V 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on right side * Enclosed single plastic mudguards at the front * Straight steel mud flaps at the rear each with splash protection (spray suppression) * Side underrun protection * Extended offset cranking by 500 mm forward * Kingpin platform extension by 520 mm with 45° angled corners and 3 recessed lockable storage compartments with lid * Chassis made from high-strength fine-grained steel * Flooring over turntable platform made of 50 mm and in low-bed platform made of 60 mm softwood * Outer boards of the drive-on ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included) with integrated 2 t lashing point * Load securing package (Lasi package) including: 2 lashing eyes (6.4 t) front left/right on the main frame of the turntable platform; on both sides, front and rear, 1 pair of 13.4 t lashing rings on the outer frame, 4 pairs per side of 10 t swivel and drop lashing rings, loadable in all directions and integrated into the outer frame; 2 pairs of 6.4 t lashing rings per side in the excavator stick tray; 8 pairs of galvanized folding extensions for total width of 3 m (not at the rear angled section) * Side extension planks stored on the left in a compartment * Excavator stick rest above rear axle up to the end of approach slope, approx. 2,300 x 740 x 190 mm * Mechanical drop supports at rear * Hydraulic, hot-dip galvanized drive-on ramps approx. 3,000 x 720 mm * Hydraulic side ramp shifting on sliding tube from ramp axle * Loading area above kingpin: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach slope) * Chassis, kingpin platform, drive-on ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks, and kingpin painted in black tone Bjdpfx Aol Th Evjqijwp * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 18.050 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2010, širina tovornega prostora: 2.520 mm, Oprema: ABS, ? Vzmetne rampe ? Nosilec za rezervno kolo ? Na stran: 7 x pritrdilnih obročev ? Na stran: 4 x žepki za stranice ? Vlečno oko 50 mm Bwodoy T Tvxopfx Aqiep ? Nakladalna višina: pribl. 910 mm ? Bobnasta zavora ? ABS ? Listno vzmetenje ? EBS ? Dvojna kolesa Vse informacije brez garancije / Pridržujemo si pravico do predhodne prodaje.

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start-up aid for maneuvering purposes on the 1st axle (operated via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle by an additional switch in the tractor unit * Automatic lowering of the air suspension during tipping operation (can be deactivated via control unit in the driver's cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinder * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping operation ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * LED tail lights 12 / 24 V with galvanized protective housing ----Drawbar / Flanged Towing Eye: * Drawbar with adjustable K80 ball hitch ----Coupling Height: * Coupling height approx. 440 - 550 mm when loaded, with raised tower for connection lines ----General attachments: * Support winch at the front * Bolted steel underride guard * Plastic quarter mudguards in front of the first and behind the last axle * Removable protective grille for rear lights (not permitted under StVZO regulations and must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * 3-way tipper body made of steel (fixed front wall, continuous side walls - without center pillar -, right side wall swinging via central locking and foldable with drop side spring assist) * Left side wall foldable with drop side hydromatics * Rear wall swinging with automatic hook locking Bodpfx Aqjy Tr Hieijwp * 5 mm steel floor made of HARDOX-450 steel or equivalent ----Load securing: * On each side 4 x 3 t lashing rings recessed in the outer frame, UVV-compliant ----Paintwork: * Axles, air tank, support winch, flanged towing eye painted in a black tone * Tipper body painted in a customer-specified RAL color (no special or metallic paint), can be changed up to approx. 6 weeks before completion * Chassis, protective grille for rear lights, hot-dip galvanized ----Info: * Sample images ----Delivery time: * The vehicle is still under construction and, barring any delays, will be completed in calendar week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 16.500 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2026, KA-TA-R 21.0: ----Axles: * Gigant axles * Start assist system for maneuvering on the 1st axle (controlled via EBS) * 1st axle as lift axle (fully automatic) * Forced lowering and raising of the lift axle via an additional switch in the tractor * Automatic lowering of the air suspension when tipping (can be deactivated via control element in cab) ----Brakes: * EBS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Tyres: * 600/55 R 22.5 ----Suspension: * Air suspension with level control during tipping ----Electrics / Lighting: * 13-pin 12V power connector * EBS multi-voltage system for tractors with 12V & 24V electrics * LED tail lights 12/24 V with galvanized protection box ----Drawbar / Flange towing eye: * Drawbar with K80 ball coupling, adjustable mm ----Coupling height: * Coupling height approx. 440 - 550 mm when loaded with raised tower for connecting lines Bwodpfjy Tr Hcsx Aqisp ----General attachments: * Support winch in front * Bolted steel underride guard * Plastic quarter mudguards in front of the first and behind the last axle * Removable tail light guard (not permitted under StVZO, must be removed before driving on public roads) ----Chassis: * Chassis made of fine-grain steel ----Tipping body: * 3-way steel tipper body (fixed front wall, continuous side walls without center stanchions, right side wall swinging via central locking and foldable with side wall spring-assisted lift, left side wall foldable with hydraulic side wall system) * Tailgate swinging with automatic hook locking * 5 mm steel floor made from HARDOX-450 steel or equivalent ----Load securing: * Each side with 4 x 3 ton UVV lashing rings recessed in outer frame ----Painting: * Axles, air tanks, support winch, flange towing eye painted in black * Tipper body painted in a RAL color of your choice (no special or metallic colors, changeable up to approx. 6 weeks before completion) * Chassis, tail light guards hot-dip galvanized ----Information: * Sample images ----Delivery time: * Vehicle is still under construction and, assuming uninterrupted and steady production, will be completed in week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 11.050 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-loader Three-way Tipper Trailer with Ramps Bedpfxeyvxg Ij Aqijwp * NEW VEHICLE * Now immediately available in RAL 9016 Traffic White * Leasing, financing, and trade-in of your old trailer possible * Reference number for inquiries: 11654 * Remote diagnostic unit with display option in the truck via EBS signal * Side marker lights with indicator function * GVW: 14,400 kg, Payload: 11,050 kg * EBS 2S/2M * Galvanized floor, 5m x 2.42m x 0.5m, laser-welded drop sides, swinging, foldable, and removable, prepared for later retrofit of side extension panels * Lockable compartment under the tipping bridge for approach ramps * Incl. 1 pair of aluminium loading ramps, 8t per pair, 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lash rings LC 5000daN at front and rear + 8 lashing eyes LC 3000daN recessed and foldable in the tipper floor (centrally positioned) * Excavator bucket rest made of hardwood * 2-step access in front of front wall (hot-dip galvanized) * Drawbar infinitely height-adjustable, hot-dip galvanized, towing eye 40mm * Wide tires 385/55R 19.5 (4 units), parabolic springs * Net hooks, rear stanchions bolted, hot-dip galvanized * Cables for the rear drop side * Plastic toolbox on the right side of the chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer * Hire purchase price: * e.g. €560 for 60 months with no down payment and no residual value. Offer from our financing partner "FM LeasingPartner." Other terms with/without residual value or down payment possible * Request your personal quote! * We are official Müller-Mitteltal sales partners * Delivery free to your site available with timely order! ----Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 We are also available by appointment outside of these hours We speak German, English, Polish, and French. WhatsApp

Stanje: rabljeno, največja dovoljena obremenitev: 31.820 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1980, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, skupna višina: 900 mm, Leto izdelave: 1980, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal T4 Low Loader Trailer * SAF axles with drum brakes * Twin tyres * Low bed with extendable loading platform * Hydraulic loading ramps, movable (2 units) * Drive-over gooseneck * Additional rear supports * Turntable construction Bwodpfx Aqey Skl Isisp ----Dimensions & loading area * Loading area approx. 9,800 mm * Loading width: 2,550 - 3,000 mm * Loading height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tyres: 235/75R17.5 ----Vehicle number: 11892----Subject to errors and prior sale----Advertising and various lettering have been digitally removed. -----We are happy to assist you with any formalities arising from the purchase of a vehicle. Simply let us know your requirements and suggestions, and we will take care of the rest. Among other things, we can offer you the following services at an additional cost: ----Trade-in of your old vehicle TÜV/general inspection Complete export processing Financing brokerage Obtaining export license plates Vehicle transport Vehicle registration Recovery and vehicle transport ----Your VTS Team

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, TRA-Kombi 18.0: 3-in-1: Suitable for hooklift containers, skip containers, and as a low loader ----Brakes: * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 tonne axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: Bwodpfxsl Tld Io Aqiop * TPMS (Tyre Pressure Monitoring System), display on truck via EBS signal (no truck-side installation required) * LED rear lights 12/24V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated sheet steel * Spare wheel carrier basket, right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Folding A-board at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer rails to guide roll-off containers * Steel floor with roller recesses in the bogie area * For hooklift container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical plug-in stop angles at the front of the track * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip locators for lateral centering of the skips, front 4 locators plug-in with swinging stop * Weld seam as anti-slip surface in the ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for hooking in securing elements for positive and non-positive locking of skips, 4 cloverleaf-type lashing bars per side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t lashing eyes per side flush-mounted in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t per pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight technically up to 20,000 kg * New vehicle, never registered, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egstorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flanged Drawbar Eye: * Height-adjustable drawbar by 300 mm * 40 mm flanged drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding rear supports * Plastic quarter mudguards * Plastic toolbox mounted front right on the bulkhead ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting ----Loading Area: * Loading platform length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Side walls made of trapezoidal profile steel, foldable with drop side spring lifter * Steel tailgate, insertable between ramp holders; stowable inside in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Each front and rear corner fitted with 1 x 6.3 t lashing point * Various holes in bulkhead and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm height) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm Bodpfsrvvfwsx Aqiewp ----Paint Finish: * Hot-dip galvanized chassis, drawbar, bulkhead, tailgate, rear stanchions, and ramps * Sideboard paint finish in RAL 9010 pure white * Painting of side walls in another RAL color possible at extra cost ----Information: * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Availability: * Available from CW (calendar week)

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for shunting via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 extra LED reversing lights * 7-pin socket at the rear for additional length lighting * Side marker lights with indicator activation * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the headboard crossmember (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection cables from truck to semi-trailer ----Lowbed platform: * Second kingpin position * Fifth wheel platform with 45° bevelled front corners and front toolbox made of galvanised, powder-coated steel sheet, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * Side aluminium drop sides, 400 mm high (in RAL custom colour), foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on the saddle platform to the lowbed approx. 700 mm long with chequer plate covering and a perforated strip at the end for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9 x mechanical folding wideners to 3 m overall width, not in rear slope (widening planks available with sealed crosswise storage compartment under the loading area) * 3 mounting shafts under the saddle platform for the storage of either aluminium loading ramps or wooden planks for wheel well covering ----Load securing (LaSi-package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashings (2 t lashing capacity per tie-down point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the cranking, 1 x above the central axle next to the longitudinal member) Lowbed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 x at the start of the cranked platform, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between the front wheel well and 1st axle, 1 x between the 2nd and 3rd axle) Bjdpetpta Dofx Aqiswp * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm rest: * Extended excavator arm rest from end of last rigid axle over steering axle to end crossmember, continuous with internal reinforcing profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * 2 x 6.4 t lashing rings per side in the exca

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * External, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right exterior on the bulkhead * Lateral underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet steel bulkhead * Drop sides made of trapezoidal-profiled steel, foldable with drop-side lifting aid * Rear wall made of steel, can be inserted between ramps - storage bracket inside in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing ring * Various holes in the front and rear cross members for 1.2 t lashing points * Profifix lashing rail along the center longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm Bsdpfx Aqjq Dyvvjiewp ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall * Drop side color in RAL 9010 pure white * Painting of the side walls in any RAL shade available at extra cost ----Information: * --Reinforced and certified body to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 29/2026

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 19.0: ----Brakes: * Wabco EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs – 110 mm wide – with tandem equalisation unit ----Drawbar / Drawbar Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tyre monitoring system ----General Attachments: * Jost landing leg at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal-profiled steel, foldable with drop side spring lifters * Steel rear wall can be slid in between the ramps – storage bracket inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In front and rear corners, each 1 x 10 t lashing ring; various holes in front wall and rear crossmember for 1.2 t lashing option * Profifix lashing rail centrally positioned along the longitudinal axis, with lashing capacity up to LC 3000 daN ----Ramps: * One-piece mech. grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be compacted to 20 mm) * Rear approach slope approx. 860 mm ----Painting: * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanised * Sideboard painted in RAL 9010 pure white * Painting of the side panels in any RAL colour available at extra cost * Axles, springs, air tank, flange eye and landing leg painted in black ----Info: * New vehicle with full manufacturer's warranty * Errors and prior sale subject to change ----Delivery Time: Bedpfxol Th Hlo Aqiswp * Available immediately ex-works at Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ---- Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with manual lowering at the rear Bwjdpfx Aepk D Ncoqijp ---- Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ---- Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * LED tail lights ---- General Attachments: * Jost landing leg at the front * External folding support legs at the rear * Toolbox made of galvanized sheet steel approx. 650 x 350 x 320 mm, fitted on the right side (black powder-coated) * Side underride protection * Plastic quarter mudguards ---- Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis – loading height +20 mm * 50 mm softwood floor in clamped design * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with board wall spring-assisted lifter * Steel rear wall, can be inserted between the ramps – storage bracket in front of the bulkhead when not in use * Rear stakes bolted ---- Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * Each front and rear corner with 1 x 10 t lashing ring; various holes in the headboard and end cross member for 1.2 t lashing options ---- Ramps: * One-piece mechanical steel grating ramps with spring assistance for one-man operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear access slope approx. 860 mm ---- Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ---- Painting: * Chassis, drawbar, headboard, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing leg painted in black * Side boards painted in RAL 9010 pure white * Side walls can be painted in any RAL color for a surcharge ---- Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ---- Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with compensating unit ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (tire pressure monitoring system) * LED lighting ----General attachments: * Jost landing leg at the front * Externally mounted, hot-dip galvanized drop-down support legs at the rear * Plastic toolbox, mounted front right on the bulkhead * Side impact protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted bulkhead in smooth sheet metal * Trapezoidal profile steel side walls, foldable with side wall spring assist * Steel rear wall, slidable between the ramps – storage bracket inside the bulkhead when not in use * Screwed-in rear stanchions ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings possible every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear cross members for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis (center), lashing option up to LC 3,000 daN ----Ramps: Bwodpfxsrvvflo Aqiep * Single-piece mechanical mesh approach ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed down to 20 mm) * Rear drive-up angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear panel * Side wall color RAL 9010 pure white * Painting of the side walls in a different RAL color available at extra cost ----Information: * --Reinforced and certified construction according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 29/2026

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, TRA-Kombi 18.0: * 3-in-1 solution: suitable for roll-off containers, skip containers, and as a low-loader ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrical / Lighting: * Tire pressure monitoring system (TPMS), display capability in truck via EBS signal (no truck-side installation required) * LED rear lights 12/24 V * 15-pin power connector ----General Attachments: * Tool box made of powder-coated sheet steel * Spare wheel carrier (basket type) on the right side * Closed side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffers * Foldable A-sign at the rear ----Loading Platform: Bedpfsl Tnwzox Aqiswp * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel deck with recessed rollers in the bogie area * Can transport roll-off containers with a container length of 5,500 – 7,000 mm * Pneumatic 4-point clamp locking and mechanical plug-in stop angles at the front of the guide track * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * Includes 8 repositionable bin stops for lateral centering of the skips, front 4 stops plug-in with pivoting stop * Weld bead as anti-slip coating in the ramp area of the track * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for securing with tensioning elements, 4 cloverleaf-type lashing brackets per side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t recessed lashing eyes per side in the outer frame ----Ramps: * Aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Additional Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egstorf

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Eye: * Drawbar with 50 mm flange eye and height adjustment of 110 mm by offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing gear, front * External folding supports, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on chassis * 50 mm softwood flooring, clamped * Preparation in front of front wall for subsequent installation of container locks * Bolted front wall, smooth sheet * Split side walls, steel sheet, trapezoidal profile—foldable with central folding stakes * Steel rear wall, sliding between ramps—holder inside front wall when not in use * Bolt-on rear stakes ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t fall-arrest lashing rings every 600 mm * Load securing package: Each front and rear corner 1 x 10 t UVV lashing ring, each side 2 x 8 t UVV retractable lashing rings in outer frame; in front and end crossmember various bores for 1.2 t lashing options ----Ramps: * One-piece sliding ramps 12 t / pair, approx. 2,750 x 620 mm * Rear approach slope approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm Bwsdemi Tcqspfx Aqijp ----Tires / Wheelbase: * Wheelbase: 1,810 mm * Tires: 235/75 R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air reservoirs, flange eye, and landing gear painted black--- * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2004, naslednji pregled (TÜV): 08/2026, * Müller Mitteltal TS3 nizkopodni polpriklopnik * Prva registracija: 11/2004 * 3 osi * Zračno vzmetenje * Gigant osi * Hidravlične dolge rampe, pomične in zložljive * Razširitve iz 2,50 m na 3,0 m širina nakladalnega prostora * Nakladalna dolžina: 8,50 m pri nakladalni višini 0,85 m Bjdjw Tgkbjpfx Aqiewp * Nakladalna dolžina na vratu: 3,40 m pri nakladalni višini 1,50 m * Podpore * Neto teža: 10.260 kg * Tehnično dovoljena skupna masa: 47.000 kg * TÜV veljaven do: 08/2026 * Tehnični pregled do: 02/2026

Stanje: rabljeno, prva registracija: 11/2006, Leto izdelave: 2006, MÜLLER - MITTELTAL T4 Kompakt Vrtljiva prikolica - Nizkopodna prikolica z zračno vzmetenimi in jamskimi kolesi - 4 x zračno vzmetene GIGANT - osi - zračno vzmetenje - 4 x kolesne jame - mehanske nakladalne rampe - 2 zadnja podporna noga, zložljiva - izvlečne opozorilne table - ABS - MICHELIN pnevmatike: 235/75 R 17.5 - težka izvedba: 40.000 kg skupne mase - lastna teža: 8.400 kg - skupna dolžina: 11.750 mm - vlečna zanka: 50 mm Posebej primerna za prevoz strojev za rezanje apna! - nemška prikolica Bwsdpfxowmpbdj Aqiop - Tehnični pregled / tehnični preizkus možen na zahtevo in za doplačilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Zelo dobro ohranjeno vozilo iz prve roke Bedpfx Aqjn Aw Hkoiewp Trosnažni nizkopodni priklopnik za prevoz Nizkopodni priklopnik z nakladalno rampo Prevoz težkih tovorov Tip T3 Komakt 30,0 Dolžina 8500 mm Širina 2500 mm Zračno vzmetenje Neto cena za trgovino/izvoz – 15.990 € Pridržujemo si pravico do sprememb, vmesne prodaje in napak ===== Telefon2 Mobilni telefon =====

Stanje: rabljeno, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 05/2021, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17.5, Leto izdelave: 2021, Oprema: ABS, Nemško vozilo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trosmerni kiper sa rampama ispod utovarene Godina prve registracije: 05/2021 pocinkovan Dozvoljena ukupna masa: 11.900 kg Sopstvena masa: 3.210 kg Nosivost: 8.690 kg Dimenzije pneumatika: 235/75 R 17,5 Tandem osovina manja od 1 m Vučna ruda je neprekidno podesiva po visini, toplo pocinkovana, vučna kuka 40 mm Ram pocinkovan BPW osovine Visina poda: 0,93 m Dodatne usluge dostupne! Izvozne tablice (crvene / 30 dana) Nemačka Bwsdpfx Aqeyxbgcoisp Kratkoročne tablice (žute / 5 dana) Nemačka Moguća organizacija austrijskih prevoznih tablica Isporuka vozila (uz nadoknadu) Podaci dati na internetu su nezahtevne informacije. Ne predstavljaju zagarantovana svojstva. Prodavac ne preuzima odgovornost za greške, tipografske greške i greške u prenosu podataka. Prodaja uz mogućnost prethodne prodaje. Prodaja isključivo privrednim subjektima. Važe isključivo naši Opšti uslovi poslovanja.

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 03/2004, Leto izdelave: 2004, Oprema: ABS, = Additional options and equipment = - Electronic Braking System (EBS) Bodpfoxyx Hasx Aqiowp = Notes = Müller-Mitteltal RAK German vehicle Roll-off trailer 2-axle Air suspension ABS Tyres 60% ID no. 709 We look forward to advising you, signing contracts, or handing over the vehicle at our dealership. Please make an appointment. If you are unable to visit our showroom, we offer complete processing by phone, email, WhatsApp, or fax. On request, we deliver your new vehicle directly to your door. This means you get the best price as well as maximum safety and convenience with your purchase. We are happy to take your used vehicle as a trade-in. We offer you the option of a digital vehicle appraisal based on your vehicle photos, even without visiting the dealership. Our specialised purchasing team offers you a guaranteed top price. Upon request, we deliver your new ‘used’ vehicle nationwide directly to your doorstep and take your trade-in back with us. Financing – leasing Immediate approval and settlement of existing loans. Your specialist partner for passenger cars, vans, commercial vehicles, and construction machinery. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrial area) Over 400 vehicles in stock at all times. The information given in advertisements, on the internet, on price labels, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment may need to be checked separately by the buyer. Offer is generally without new TÜV approval; we will gladly provide you with an offer from our partner workshop. Subject to errors and prior sale. = Further information = Unladen weight: 4,850 kg Payload: 13,150 kg Gross vehicle weight: 18,000 kg

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 08/1996, Leto izdelave: 1996, Oprema: ABS, = Additional Options and Equipment = Bwedpfx Aqjxt Sd Eeiep - Electronic Braking System (EBS) = Remarks = Müller-Mitteltal Trailer ATL Roll-off trailer 2-axle Air suspension ABS Tyres 60% Information available in German We look forward to advising you Contract signing or vehicle collection at our dealership. Please arrange an appointment If you are unable to visit our dealership in person, we offer complete processing via telephone/email/WhatsApp/fax On request, we can deliver your new vehicle directly to your door This means best price for you, maximum security and convenience during acceptance We are happy to accept your used vehicle as part-exchange We offer the option of digital vehicle evaluation based on your vehicle photos even without a dealership visit Our specialised purchasing team offers you a guaranteed top price On request, we deliver your new used vehicle nationwide directly to your door, and collect your trade-in for financing or leasing Immediate approval and settlement of existing credit Your specialist partner for cars, transporters, commercial vehicles, and construction machinery ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial Area) Over 400 vehicles permanently in stock The details provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability/warranty for typing or data transmission errors. Listed equipment may need to be checked separately. Our offer generally does not include new TÜV approval; we are happy to make you a quote with our partner workshop. Subject to errors and prior sale = Additional Information = Unladen weight: 2,360 kg Payload: 10,640 kg Gross vehicle weight: 13,000 kg

Stanje: rabljeno, lastna masa: 3.210 kg, največja dovoljena obremenitev: 8.690 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 05/2021, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17.5, Leto izdelave: 2021, Oprema: ABS, Nemško vozilo MASTERLINE Müller-Mitteltal KA-TA-R 11,9 trosmerni kiper sa rampama ispod utovarene Godina prve registracije: 05/2021 pocinkovan Dozvoljena ukupna masa: 11.900 kg Sopstvena masa: 3.210 kg Bwodpfxoyw N Npe Aqiep Nosivost: 8.690 kg Dimenzije pneumatika: 235/75 R 17,5 Tandem osovina manja od 1 m Vučna ruda je neprekidno podesiva po visini, toplo pocinkovana, vučna kuka 40 mm Ram pocinkovan BPW osovine Visina poda: 0,93 m Dodatne usluge dostupne! Izvozne tablice (crvene / 30 dana) Nemačka Kratkoročne tablice (žute / 5 dana) Nemačka Moguća organizacija austrijskih prevoznih tablica Isporuka vozila (uz nadoknadu) Podaci dati na internetu su nezahtevne informacije. Ne predstavljaju zagarantovana svojstva. Prodavac ne preuzima odgovornost za greške, tipografske greške i greške u prenosu podataka. Prodaja uz mogućnost prethodne prodaje. Prodaja isključivo privrednim subjektima. Važe isključivo naši Opšti uslovi poslovanja.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2018, skupna dolžina: 11.830 mm, skupna širina: 2.550 mm, skupna višina: 3.720 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, barva: drugo, Leto izdelave: 2018, Oprema: ABS, dvižna zadnja plošča, = Additional options and accessories = - EBS - Hydraulic system - Tail lift = Remarks = Number of axles: 4, Unladen weight: 9900 kg, Gross weight: 40000 kg, Type of chassis: Full chassis, Chassis material: Steel, Suspension type: Full air suspension, ABS, EBS, Hydraulic system, Year of body: 2018, Body material: Steel, Ramps: Hydraulically controlled, Axle type: BPW, Tail lift, Tail lift type: Rear platform, Tail lift material: Steel, wheel recess / double hydraulic ramps / 40T technical / galvanized / extendable = Further information = General Information Cab: Day Registration: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Steered; Tyre tread depth left inner: 10 mm; Tyre tread depth left outer: 10 mm; Tyre tread depth right inner: 11 mm; Tyre tread depth right outer: 10 mm Axle 2: Twin tyres; Tyre tread depth left inner: 8 mm; Tyre tread depth left outer: 7 mm; Tyre tread depth right inner: 7 mm; Tyre tread depth right outer: 7 mm Axle 3: Twin tyres; Tyre tread depth left inner: 7 mm; Tyre tread depth left outer: 7 mm; Tyre tread depth right inner: 10 mm; Tyre tread depth right outer: 10 mm Axle 4: Twin tyres; Tyre tread depth left inner: 7 mm; Tyre tread depth left outer: 6 mm; Tyre tread depth right inner: 4 mm; Tyre tread depth right outer: 6 mm Weights Curb weight: 9,900 kg Payload: 30,100 kg GVW: 40,000 kg Functionality Tail lift: Rear platform Loading height: 89 cm Bjdpeyqp Tmjfx Aqiswp Environment Emission class: Euro 0 Condition General condition: Average Technical condition: Average Optical condition: Average Damages: None Financial information Leasing rate: €698 per month (default, 60 months); Request more information and terms = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognisable quality • Good prices • Reliable business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates quickly arranged • Expert technical services • The security of 'recognisable quality' • And more.... Please visit our website for special offers and the full stock list: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and submit a request via our website. Ask directly about our European warranty package.