Fliegl 1-Achs Container Anhänger Eps 38 nakup rabljenega (51.331)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT34202036640, lastna masa: 6.213 kg, največja dovoljena obremenitev: 35.787 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2025, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 27 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.310 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: rumena, The images are archive photos; the vehicle may still be in use! Coupling height approx.: 1,200 mm Chassis – Tipper Semi-Trailer Basic lightweight construction, kingpin plate with replaceable 2" kingpin, curved front wall (patented). Folding underrun protection, underrun protection with "spring assist" for easier operation Integrated mudguard bracket with stone-repellent surface Axles & Suspension SAF disc brake axles with 430 mm disc diameter (axles/chassis laser aligned) for reduced tire wear and lower fuel consumption Air suspension 1st axle: automatic lift axle with forced lowering and start assist, activated by braking three times; start assist is functional up to 30% axle overload and up to max. 25 km/h. Braking System 24 volt EBS (electronic braking system) with EBS socket at the front (without connection cable); test port for brake cylinder pressure routed outside at EBS module, with raise/lower valve. Paver brake, electrically operated from the truck without truck-side installation; automatic tipping suspension lowering with shut-off valve. TPMS (Tire Pressure Monitoring System) as per ECE R 141; display via screen in the tractor unit through EBS, no truck installation required (system compatibility in tractor unit required; only with standard tires). Axle load detection via EBS CAN-bus signal, displayed in cab; truck must be suitably equipped, no truck-side installation. Wheels and Tires 385/65 R22.5 steel rims Electrics Side amber LED lights synchronized with indicators (flashing side marker lights) 2 white LED position lights at front 2 white/red LED lane marker lights at rear LED work lights on both sides; 2 additional work lights recessed into the rear Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw coupling (fixed, NW 48 mm). (without hose connection) Operated hydraulically via truck PTO. Body Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Angled front wall with external hydraulic cylinder mount. Interior step on front bulkhead. Greenline – conical and aerodynamic body shape "Membrane" rear wall Rear wall is a hydraulically operated tailgate opening upwards, approx. 2,200 mm clearance height Sidewalls continuously 5 mm thick, floor continuously 8 mm thick Body with insulation, Fliegl Asphalt Profi Thermo: body insulated at front, sides, bottom, and rear with Fliegl Isotherm "Flip Top Sliding Cover", automatic rear closure with folding bows. Cover folds forward. Electrically operated cover with 7-pin plug (charging socket) at the front, no connection cable, no truck install; operation at the trailer and via radio remote control. Operating Notes Iijdoyylapspfx Aicec For transporting salt, lime, etc., we recommend using a hoist cylinder with a hard-chromed piston rod to prevent corrosion from the cargo. The stated total weight is technically achievable; depending on the cargo, total weight may not be attainable while observing legal axle, support, and kingpin loads. (Incorrect load distribution may cause poor driving and tracking behavior) Paintwork Frame: DB 7350 Nova Grey (10-year corrosion warranty) Landing legs: black coated Body: RAL 1007 Narcissus Yellow Tarpaulin: RAL 7038 Agate Grey

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT23502035606, lastna masa: 5.325 kg, največja dovoljena obremenitev: 26.675 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.600 mm, prostornina tovornega prostora: 27 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.490 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: siv, zavoro prikolice: prikolica s zavoro, The images shown are archive photos; the vehicle may still be in use! Chassis - Tipping Semi-Trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin and two king pin positions King pin installed in the front position Curved front wall "patented" 24t 2-speed landing gear, single-sided operation, with semi-circular base and straight mounting plate, with push/pull equalizer Decoupling under load is not possible; when decoupled, the vehicle must be positioned on a rearward slope. Free rear swing clearance approx. 2100mm in rear position and approx. 2600mm in front position! Wheel chocks with holder Aluminum side underrun protection Foldable rear underrun protection Rear underrun protection with "spring assist" for easier handling Half-shell mudguards Splash flaps behind last axle, asphalt version, hinged to the mudguard, with stowage option on top of the mudguard, mudguard shortened Tarpaulin rod with holder Tow hook at rear (not for Revolution) Axles & Suspension BPW or SAF drum brake axles, at the discretion of the manufacturer Axles in off-road version "Axle/chassis laser alignment" for reduced tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-assist, activation by "brake 3x" (start-assist operative up to 30% axle load exceedance and to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" 10-year warranty against rust-through Braking System 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without interconnection cable 24 Volt EBS, electronic braking system with EBS socket at front, without connection cable Attention: The trailer may only be towed by towing vehicles that ensure effective ABS operation! With raise & lower valve Vehicle stability control system Finisher brake, electrically operable from the truck, without truck installation Automatic tipping lowering with shutoff valve Wheels and Tires 385/65 R22.5" brand at the manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination 2 white front position LED lights Ijdpfx Aisx Dkpnjcoic 2 rear white/red lane marker lights 1 x 15-pin front socket, without connection cable 1 LED headlight with integrated "Osprey" camera as trough camera (technical approval required upon order) Number of LED flashers at the rear, switched via a cab switch, without truck installation, connected to PIN 12 Pin allocation to be specified upon order! Reversing camera system with color flat-screen monitor, wireless connection to the monitor. Monitor with suction-cup mount and power supply via 24V vehicle socket Registration/Country Plates Germany With Dekra inspection and certificate (acc. §13 EC-FGV) 24/7 service hotline Body stability to EN 12642 Prepared for single-line number plate holder Contour marking with reflective tape acc. ECE R 048, white on sides, red at rear Painting Frame: DB 7350 Nova Grey "10-year warranty against rust-through" Support legs: Black coated Body/sides: Scania Urban Grey 2389173 Sliding tarp: RAL 7038 Agate Grey

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014232, lastna masa: 5.900 kg, največja dovoljena obremenitev: 29.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, dolžina tovornega prostora: 13.650 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.638 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: srebrn, The images are archive photos! The vehicle may still be in use! Chassis: Semitrailer for Freight Forwarding Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" king pin Drive-over and suitable for use with construction/agricultural machinery up to max. 24,000 kg GVW and up to a maximum machinery width of 2480 mm (the track width of machines or vehicles to be transported must not exceed 2200 mm), hook-in bar for aluminium ramps at the rear (wider construction/agricultural machinery must not be loaded) Outer frame in new slightly angled design with "Load-Lock Profile" for lashing strap attachment 14 pairs of recessed lashing rings in the outer frame, each rated at 2.5 t 6 pairs of recessed lashing rings in the outer frame, each rated at 5 t 24 t, 2-speed landing gear, single-sided operation, with straight base, without crossbar equalizer Free landing gear foot dimension or free swing radius to the rear approx. 1920 mm Rear support foldable 2x wheel chocks with holder Side underrun protection aluminium Rear underrun protection steel Quarter mudguards in front of and behind each axle Iodpfjxb D Swex Aiceic With anti-spray splash guards behind each axle 1x spare wheel holder for 1 spare wheel, with fixing kit 1x spare wheel, same make as standard tires, steel rim Axles + Suspension SAF drum brake axles "Axle/chassis laser alignment" - reduces tire wear and fuel consumption Air suspension 1st axle is an automatic lift axle, additionally electronically controllable from the truck, incl. forced lowering and starting aid, no installation required on the truck (starting aid functions up to an axle overload of 30% and up to a speed of max. 25 km/h) Braking System 2-line compressed air braking system Color-coded piping for easy maintenance Spring-actuated parking brake 2 foolproof coupling heads front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Important: The drawbar trailer may only be towed by tractor units that ensure the effectiveness of ABS! With lift & lower valve Vehicle - Driving Stability System "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via tractor unit's screen via EBS, no truck installation (requirement must be met by the tractor unit. Only for standard tires) Wheels and Tires 235/75 R17.5 twin tires Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side amber LED lighting Side amber LED lighting connected to indicators "flashing side markers" 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof sockets at the front, without connecting cable Floor Phenolic plywood panels approx. 30 mm thick, for high point load capacity, forklift axle load up to max. 5,600 kg Front wall / Front corner posts 25 mm aluminium hollow profile, 1,350 mm high, corner stanchions steel, volume design Front wall additionally covered on inside with 1,250 mm high phenolic plywood panel Frame hot-dip galvanised The images are archive photos! The vehicle may still be in use!

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902036561, lastna masa: 5.820 kg, največja dovoljena obremenitev: 29.180 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: rdeča, The images are sample/archival pictures! The vehicle may currently be in use! Tarp color freely selectable Chassis: Semi-Trailer Forwarder Fine-grained steel welded construction in lightweight design, fifth wheel plate with exchangeable 2" kingpin Slightly angled new design outer frame with "Load-Lock profile" for lashing strap attachment 3 pairs of additional lashing eyes recessed in the outer frame, each rated 2.5 t 14 pairs of additional lashing eyes recessed in the outer frame, each rated 2.5 t 24 t 2-speed landing gear, one-sided operation, with straight base, load equalizing type: SAF Note: Free landing gear foot spacing or free rear swing radius approx. 1930 mm Extendable rear ladder Side door holders 2 wheel chocks with holders Side underrun protection, aluminum Painted in RAL 3002 Carmine Red No warranty for coating/lacquering quality on repainted or coated attachments. Rear underrun protection, galvanized steel Painted in RAL 9010 Pure White, including rear underrun protection brackets No warranty for coating/lacquering quality on repainted or coated attachments. Quarter shell mudguards in front of and behind axle assembly With anti-spray mudflaps according to EU regulations Rear crash protection 1 aluminum ladder approx. 2550 mm, with side holder, behind side underrun protection Mounting rail on outer frame for direct tarp tensioners, bolted design, stands approx. 15–20 mm above loading surface, upper section with perforated profile for lashing straps, load-lock side rail must remain usable (since no lashing eyes). With bottom aluminum drop-in slat usable as stopper! (not in conjunction with sideboards) 2 plastic toolboxes, w = 800 / h = 450 / d = 450 mm 1 each on front left and right, behind the 3rd axle Isdpfxoxbzkko Aiceic Axles & Suspension BPW disc brake axles with 430 mm disc diameter Wheel hubs painted in RAL 3002 Carmine Red "Axle/chassis laser alignment" to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Color-coded piping for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connector line 24 Volt EBS, manufacturer Wabco, electronic brake system with EBS socket at the front, without connection cable Attention: This trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! With lift & lower valve + auto-reset function Vehicle stability control system Telematics Idem Telemetry incl. LIN battery, coupling sensor and GPS (no contract included, customer must arrange contract). Wheels & Tires 385/65 R22.5, manufacturer as selected by the supplier Polished aluminum rim, make Alcoa Dura-Bright Electrics 24 Volt, multi-chamber lighting units, side yellow LED lighting Lamp carrier painted in RAL 9010 Pure White No warranty for coating/lacquering quality on repainted or coated attachments. 2 white marker lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connector cable LED working lights on both sides (controlled via reverse light), positioned at height of first cross-member behind landing gear 2 additional LED working lights at the rear, controlled via reverse light Tarp Tarp with welded horizontal and vertical belts Customer branding possible on tail portal, tarp color freely selectable

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.900 kg, največja dovoljena obremenitev: 30.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.150 mm, prostornina tovornega prostora: 38 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 3.740 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle to match your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Patented curved front panel Central telescopic support leg, uncoupling when loaded is not possible, in uncoupled state the vehicle must stand with a slope to the rear. 2 wheel chocks with holders Folding underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface With anti-spray mudflaps only on the last axle 1 tarpaulin bar with holder 2 rear towing hooks Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-aligned axles/chassis to reduce tire wear and fuel consumption Axles in off-road specification Air suspension 1st axle with automatic lift axle function, including forced lowering and starting aid, activation: brake 3 times Hot-dip galvanized lift axle mechanism, 10 years warranty against corrosion perforation Braking System 2-line air brake system with color-coded lines for easy servicing Spring-loaded parking brake Iedpsi Riz Rofx Aicjic 2 non-interchangeable couplings at front EBS (Electronic Brake System) with EBS socket at front With lift & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5, manufacturer at manufacturer’s option Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane indicator lights at rear 2 x 7-pin non-interchangeable sockets at front, without connection cables Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, nominal width 48 mm (without hose connection) Operation hydraulically via truck PTO Tipping Body Aluminum box-type body made of premium-grade, wear-resistant alloy; 5 mm thick front wall, outer side walls made of 30 mm hollow chamber profiles, clean welded, with bulk material deflecting top rail profile. Interior with access steps on front wall (not in combination with Cramaro). Shovel and broom holder mounted outside on front wall. Greenline - conical and aerodynamic body design Membrane-type rear wall Rear wall as pendulum flap with double hinge, external mounting and dual hook locking. Rear wall with rubber seal – Note: heat resistant up to max. 170°C! Continuous 6 mm floor plate Standing platform with climb, connection plate for air/electrics and brakes, large clearance for optimal usability. Roll tarp stored on passenger side, central locking on driver side Paintwork Frame finished in DB 7350 Novagrau gray 10 years Tailored Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are individually realized to customer demand.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT34202038273, lastna masa: 5.680 kg, največja dovoljena obremenitev: 29.320 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 2.680 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, barva: srebrn, Chassis semi low loader for haulage Fine-grained steel welded construction in reinforced Scandic design, fifth wheel plate with replaceable 2" kingpin Outer frame in low loader design: 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated for 10 t 10 pairs of combined stake pockets with lashing rings (bolted), each rated for 5 t, recessed in outer frame, approx. 72 x 42 mm inner dimensions Outer frame with "Load-Lock profile" for fitting tensioning straps, approx. one hole every 400mm 24 t, 2-speed landing leg with single-sided operation Free swing radius to landing foot approx. 2,500 mm, landing foot width approx. 2,600 mm Extension ladder at rear 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, galvanized steel Spray flaps at the rear over entire width Ijdpfszbbpuox Aicoic Quarter mudguards in front of and behind axle assembly With antispray mudflap only on rearmost axle 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable In front of axles, 1x left, 1x right 1 storage box, full width, closed, beneath loading floor, approx. w=450 mm/h=400 mm/d=2,460 mm, mounted directly in front of axles 3 tie-down/stake rails with 4 pairs of locking cut-outs, recessed transversely in floor over total width up to outer frame (max. usable internal width between outer stanchions approx. 1,782 mm), approx. 80 mm high. With cut-outs at top and bottom for lashing and fitting stakes 80 x 80 mm. Bottom with angled plate as stop, half open downward. Combined design for 2 x 20 ft or 1 x 40 ft container, 4 pairs of container lock adapters 10 combined plug-in stakes with cut-out at bottom, w=80/ d=50/ l=1,200 mm 6 plug-in stakes w=80/ d=80/ l=1,200 mm, hot-dip galvanized Axles and Suspension BPW disc brake axles with 430 mm disc diameter Air suspension 1st axle auto lift, additionally electrically operable from tractor, including forced lowering and start aid Braking system 2-line compressed air braking system Spring-type parking brake 2 non-interchangeable couplings at front 24V EBS, electronic braking system with EBS socket at front Note: Towed vehicle may only be towed by towing vehicles that guarantee proper functioning of ABS! with raise & lower valve + auto-reset function Vehicle Stability Control System Axle load detection via EBS CAN bus signal, display in driver’s cab Wheels and Tyres 385/65 R22.5" Steel rims "TPMS" tyre pressure monitoring system according to ECE R 141, display via towing vehicle, through EBS Electrics 24 Volt, multi-chamber lamps, side yellow LED marker lights Side yellow LED marker lights linked with indicator “flashing side markers” 2 white LED position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front 2 additional LED work lights, at rear 1 LED beacon with mounting bracket 2 pairs of LED illuminated warning signs, extendable to 3,000 mm 2 additional LED worklights, top of front wall Additional 7-pin socket in rear underrun guard Floor Slip-resistant screen printing panels approx. 30 mm thick, for high point load, suitable for forklift wheel loads up to max. 7,900 kg "Premium floor sealing", circumferentially sealed joints Front wall / corner posts 25 mm aluminium hollow profile, 1,350 mm high, corner posts steel, volume design Front wall additionally lined inside with 1,250 mm high phenolic plywood "Crash Blocker", bottom inside at approx. 140 mm high, with steel impact protection

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902036248, lastna masa: 7.272 kg, največja dovoljena obremenitev: 27.728 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.655 mm, prostornina tovornega prostora: 92 m³, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 4.005 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, Monocoque colour: single tone, RAL shade freely selectable Chassis: Semitrailer for forwarding/logistics applications Fine-grain steel welded construction in lightweight design, all the way to the support legs; fifth wheel plate with interchangeable 2" kingpin 24 t, 2-speed landing gear, single-sided operation Extension ladder at rear Side-mounted door retainers Foldable splash guard for lighting unit Rear underrun protection 1 aluminium ladder approx. 3,550 mm, side-mounted holder 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Axles & Suspension BPW disc brake axles with 430 mm disc diameter Air suspension, first axle with automatic lift axle function, including forced lowering and starting aid, actuation via "3x braking" Braking System 2-line compressed air brake system Spring-actuated parking brake 2 non-interchangeable coupling heads at front 24 Volt EBS (Electronic Braking System) with EBS socket at front Note: The trailer may only be towed by vehicles that ensure ABS effectiveness! With raise/lower valve Vehicle stability control system "TPMS" Tyre Pressure Monitoring System per ECE R 141, display in towing vehicle via EBS 1 additional air connection, front left/rear, with quick-release coupling Wheels and Tyres 385/55 R22.5" make as per manufacturer’s choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lamps linked to indicators ("flashing side markers") 2 white front position lights in LED 2 white/red lane marking lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reverse light Sliding Floor Hydraulic System Hydraulic cylinder with sliding device installed in floor. Dual-circuit hydraulic system. Electric shifting for forward/reverse via wired remote control Operation hydraulically via truck PTO Hydraulic connection with hose at front wall and HDK threaded connector NW = 48 mm Sliding Floor (SB) Sliding floor with wear plate at rear Floor boards made of aluminium, 8 mm profile, grooved design Body (Monocoque, SB/Bin) Aluminium box body made of high-grade, wear-resistant material. Front and side walls from aluminium hollow profiles, top edge all around made from welded, wide special aluminium reinforcement profile, bottom with welded-in special frame. Moving bulkhead wall for improved unloading of cargo, with reinforced tarpaulin skirts at the bottom. Rear wall of aluminium hollow profile as double-leaf door, split 1/2 to 1/2, all-round special U-profile with stop and rubber seal, two external rotary bolt locks, locked at top and bottom. Rear wall with mechanical safety lock; operation at rear, left in direction of travel Standing platform with double-sided ladder access (left/right in direction of travel) and railing, for opening and closing the sliding roof tarpaulin 3 removable and swivelling cross bows for tarpaulin support + tarpaulin supports front at headboard and rear at tailgate Paintwork Iedpfx Aieza S E Rscsic Frame: DB 7350 Nova grey "10 years anti-perforation warranty" Support legs: black coated Body: natural aluminium – can be painted any RAL colour as per customer request Roll tarpaulin: not yet installed

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014072, lastna masa: 7.300 kg, največja dovoljena obremenitev: 27.700 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.530 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 3.330 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5", stanje pnevmatik: 100 odstotek, barva: srebrn, Chassis Semi-Trailer for Freight Forwarding Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" king pin, main frame reinforced for 25 t at the center of gravity over 3 m loading length in retracted condition 13 pairs of welded hooks on cross members for lashing strap attachment 23 pairs of recessed lashing rings in the outer frame, each rated 3.5 t 24 t 2-speed landing gear in reinforced version for uncoupling when loaded, single-side operation 1 spare wheel holder for 1 spare wheel 1 open storage compartment for stakes, with insertion option behind front wall for storage / or storage in compartment between extended main beams 4 pairs of recessed stake pockets in the outer frame, for square tubes 80x80 mm 5 stake pockets recessed centrally in the floor, for square tubes 80x80 mm, with reinforcement beams, each installed between the outer stake pockets except one 6 lashing/stake rails recessed crosswise in the floor over the full width to the outer frame (max. usable internal width between outer stake pockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel bars, top and bottom, distance between top and bottom approx. 60 mm (of the round steel). Bottom closed with angle plate, half open downwards. For lashing and plugging stakes, 80 x 80 mm. Rear pull-out ladder on right side in travel direction (FR) 5 x 3 pairs of stake pockets recessed in the outer sides of the main beams, for square tubes 80x80 mm, incl. reinforcement beams 10 “lightweight” plug-in stakes, W=80/D=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with welded lashing points on both ends 2 plastic toolboxes, W=600 / H=425 / D=460 mm, lockable Telescoping Extendable by max. 4,000 mm, lockable at approx. every 500 mm Iiodpfxeza Dyys Aicjc Main frame telescopic Locking with pneumatic pin system + frame lock indicator on both sides, operated via hand button; control for brake/lock and suspension on left in travel direction (FR-left) in front of the axles Storage compartment between the main beams when extended Axles & Suspension SAF disc brake axles with 430 mm disc diameter Last axle is steered, with automatic reverse lock via reversing light and additional lock function on vehicle via hand button Axle spacing offset 1310/1410 mm Air suspension 1st axle with automatic lift, additionally electrically controllable from the truck, with start assist Braking System 2-line compressed air braking system Spring-loaded parking brake 2 anti-mix-up coupling heads at front EBS Wabco, electronic braking system with EBS socket at front With raise & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in cab (truck must be equipped accordingly) Wheels & Tyres 385/65 R 22.5" steel rims Electrics 24 Volt, multi-chamber tail lights, side yellow LED lighting 2 white LED position lights at front 2 white/red LED lane guidance lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front 1 beacon with bracket, switchable via parking light 2 pairs of warning panels, LED illuminated and extendable to 3,500 mm Flashing side marker lights Side 7-pin sockets, positioned 2x at front panel, 2x at landing gear, 2x at rear underrun protection 1 additional 7-pin socket in the rear underrun protection 2 additional LED work lights, mounted top inside at front wall, with switch on front wall outside, left in travel direction (FR-left) Screen-printed wooden flooring approx. 30 mm thick 25 mm aluminium hol

Stanje: rabljeno, lastna masa: 2.320 kg, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 01/2020, naslednji pregled (TÜV): 12/2026, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 380 mm, vzmetenje: jeklo, velikost pnevmatike: 285/70R19.5, barva: črn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 2 osi, tandem, listnato vzmetenje, ABS (protiblokirni sistem), opora spredaj, opora zadaj, stranska aluminijasta zaščita, vlečna oj s prilagodljivo višino. Nadgradnja: tandem prikolica za prevoz prekucnih zabojnikov, osi Gigant, bobnaste zavore! Višina nakladanja pribl. 780 mm! PODATKI O DODATNI OPREMI BREZ GARANCIJE, spremembe, vmesna prodaja in napake pridržane! Iiodpoy Uzfkefx Aicec

Stanje: novo, lastna masa: 3.100 kg, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.400 mm, širina tovornega prostora: 1.630 mm, višina nakladalnega prostora: 813 mm, vzmetenje: zrak, velikost pnevmatike: 285/70R19.5, barva: srebrn, Leto izdelave: 2021, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: in transit, 2 axles, BPW axles, tandem, air suspension, lift/lower function, ABS (anti-lock braking system), lashing rings, front and rear supports, height-adjustable drawbar. Body: for skip containers, drum brakes, hot-dip galvanized, load securing, BPW axles type KMBMH 7008! 10.9 t payload, pre-fitted for attachable ramps for construction machinery transport. Upon request and at an additional charge, the loading platform can be extended on our pre-run trailers! German production! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Iiodpfei Rrvvjx Aicoc

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014200, lastna masa: 6.700 kg, največja dovoljena obremenitev: 28.300 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: sivo-črna, Chassis, semi-trailer, forwarding version Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame slightly chamfered, new design with "Load-Lock profile" for securing strap hooks 24 t, 2-speed landing gear, single-sided operation, with straight base, without telescopic adjustment Free landing leg corner dimension or free rear swing radius approx. 1920 mm 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards in front of and behind each axle Spray flaps in front of the 1st axle and behind each axle with anti-spray, according to EC 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm (lock not included) Axles + Suspension SAF drum brake axles "Axles/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated by "3x braking" (start assist is active up to a 30% overload on the axle and up to a maximum speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tyre damage Brake system 2-line compressed-air brake system Colour-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle dynamic stability system Wheels and tyres 235/75 R17.5, brand according to manufacturer's choice Iisdpfx Asza A Txoicoc Steel rims, factory silver Electrics 24 V, multi-chamber lamps, yellow LED side marker lamps 2 white marker lamps at the front 2 white/red lane marker lamps at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable Floor Phenolic plywood approx. 30 mm thick, for high point load capacity, suitable for forklift axle load up to max. 5,600 kg Front wall / front corner posts 25 mm aluminium hollow section, 1,350 mm high, front corner posts in steel, volume design Country of registration / plates Germany With Dekra inspection and certificate (according to §13 EC FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminium

Stanje: rabljeno, prevoženi kilometri: 247.807 km, moč: 315 kW (428,28 KM), prva registracija: 10/2016, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: rdeča, vrsta prenosa: samodejen, emisijski razred: Euro 6, prostornina tovornega prostora: 13 m³, dolžina tovornega prostora: 5.800 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, klimatska naprava, * Sun visor * ABS * ASR (traction control) * Rain sensor * Radio * On-board computer * Reverse warning system * Cruise control * Air horns * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Fog lights * Automatic driving lights * Cornering light * Roof hatch * Rear window Ijdpfsxbu Ntex Aicsic * Comfort driver's seat * Seat heating * Longitudinal and transverse differential locks * Off-road driving mode * AP axles * High chassis version * Rotating warning beacon orange * Exhaust behind cab * Shunting coupling * Foldable underrun protection * Weight variant 41 t * 12-speed * Suspension: leaf * Payload: 16,586 kg * Retarder: High Performance Engine Brake ---- Body: Meiller 3-way tipper, steel, reinforced, Bordmatik (left side), cab end wall raised with excavator guard, Jet side boards, rear chute.----Grounder, weight variant 41,000 kg, stabiliser on 2nd rear axle reinforced, skid plate under bumper, Fuel Performance Pack 1, Powertrain Pack 1, illuminated Mercedes star Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY WITH REGARD TO EQUIPMENT AND ACCESSORIES. All contracts, invoices, proforma invoices, orders and sales discussions are based on our general terms and conditions (see legal notice/imprint).

Stanje: novo, največja dovoljena obremenitev: 595 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.050 mm, širina tovornega prostora: 1.310 mm, višina nakladalnega prostora: 70 mm, skupna širina: 1.757 mm, skupna višina: 862 mm, Leto izdelave: 2026, Humbaur HA 752113 KV * Single-axle * Car trailer * New vehicle * Drop-side extension * Weight: 155 kg * Gross weight: 750 kg * Payload: 595 kg * Internal dimensions: 2,050 mm x 1,310 mm x 700 mm * Overall dimensions: 2,982 mm x 1,757 mm x 862 mm * Loading height: 510 mm * Tyres: 13 inch * V-tongue drawbar, hot-dip galvanized * 13-pin plug * 15 mm thick floor panel * Side panels made of anodized, double-walled aluminium profiles * Tailgate(s) with recessed locks * Lashing rings (4 units up to 2,050 mm / 6 units from 2,510 mm box length) integrated in the side panels, tensile force 400 kg per lashing ring, DEKRA tested * Humbaur multifunction lighting integrated in the underrun guard * Corner stanchions with plug-in option * 19% VAT Iodpfovvgmwox Aicsic ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We explicitly reserve the right to prior sale, as we also offer this item on other platforms. We strongly recommend an inspection and check, so that no misunderstandings arise regarding the condition and suitability for the buyer. Viewings and inspections are possible at any time by appointment and are expressly welcome!!! The stated internal dimensions are approximate values. For new vehicles, prices are plus freight costs and registration certificate fees. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! PART EXCHANGE AND UPGRADES POSSIBLE!!! Exhibition ground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, največja dovoljena obremenitev: 1.005 kg, skupna masa: 1.200 kg, konfiguracija osi: 1 os, prva registracija: 09/2002, naslednji pregled (TÜV): 05/2027, dolžina tovornega prostora: 2.500 mm, širina tovornega prostora: 1.200 mm, višina nakladalnega prostora: 1.800 mm, skupna širina: 1.760 mm, skupna višina: 2.310 mm, Leto izdelave: 2002, Humbaur HA 75/12 * Single-axle * Car trailer * Low-loader * Tarpaulin and frame LH 1800 mm * First registration: 23.09.2002 * Next inspection (TÜV): 05/2027 * Unladen weight: 195 kg * Gross weight: 1200 kg * Payload: 1005 kg * Internal dimensions: 2,500 mm x 1,200 mm x 1,800 mm * Overall dimensions: 3,205 mm x 1,760 mm x 2,310 mm * Floor plate 15 mm thick * Jockey wheel Iisdpfx Aisx N Iqpecoc * Wooden floor * Aluminium sidewalls with railing * Rear wall foldable ATTENTION !!!!! PLEASE READ CAREFULLY !!!!! We explicitly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend viewing and inspection to avoid any misunderstandings regarding condition or suitability. Inspections are possible at any time by appointment and are expressly encouraged!!! The stated internal dimensions are approximate. For new vehicles, prices are plus delivery costs and registration document fees! TRADE-INS ACCEPTED FOR ALMOST ANYTHING!!! PART EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Constantly over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2024, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.680 mm, Day registration in 06/2024 due to the new TPMS regulation. Chassis: Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled with 'Load-Lock profile' for lashing strap attachment 24 t, 2-speed landing gear, single-sided operation Side underrun protection, aluminum Rear underrun protection, galvanized steel Quarter-shell mudguards in front of and behind axle assembly With anti-spray mud flaps compliant with EU regulations Rear impact protection Spare wheel holder for 1 spare wheel, with wheel fixing kit Axles & Suspension: SAF disc brake axles with 430 mm disc diameter 'Axles/chassis laser alignment' reduces tire wear and fuel consumption 1st axle automatic lift axle, additionally electrically operable from the truck Includes forced lowering and start-up aid, no installation required on truck Brake System: 2-line compressed air braking system Spring-loaded parking brake EBS by Wabco, electronic braking system with EBS socket at the front, without connection cable With raise & lower valve + auto-reset function Vehicle stability control system Axle load detection via EBS CAN bus signal, display via monitor Wheels and Tires: 385/65 R22.5" / 6 steel rims, factory silver Electrics: 24 volt, multi-chamber lights, side LED marker lights (amber) 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connection cable 2 additional LED work lights at the rear, controlled via reverse light Floor: Approximately 30 mm thick phenolic plywood, mounted on continuous longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7100 kg at the bulkhead Ijdjri Hihopfx Aicsic Drop-in Slats: 5 rows of aluminum V-insert slats 2 pairs of Vario steel slats, in conjunction with Vario beams for fore and aft load securing (then no insert slats required in the area of the steel slats) Rear Portal Doors: Double-winged, each with 2 internal lock rods. Tarp with welded horizontal and vertical belts Unladen weight: 5,960 kg Offer and pictures non-binding

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, lastna masa: 6.575 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2011, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.300 mm, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 30 odstotek, medosna razdalja: 1.360 mm, Leto izdelave: 2011, Oprema: ABS, Rabljen odprt polpriklopnik Jeklena sprednja stena z izbočenjem za dolge jeklene profile Tla okrepljena z jeklenimi profili Stranski žepki za stebričke Iijdpey Ercbsfx Aicoc Skladiščna škatla za vstavljive stebričke

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902030381, lastna masa: 5.960 kg, največja dovoljena obremenitev: 29.040 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2022, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: črn, The images shown are archive images; the vehicle may still be in use! Fine-grained steel welded construction, fifth-wheel plate with replaceable 2" kingpin, slightly inclined outer frame with "Load-Lock profile" for lashing strap attachment, 24 t, 2-speed landing gear with single-side operation, straight lower section, without compensation slide. Note: Free landing leg corner dimensions or free rear swinging radius approx. 1930 mm without landing legs, sliding ladder at the rear, lateral door retainers, pallet box for 32 EUR-pallets (long version), ground clearance approx. 300 mm. Rear underrun protection, "Blocker"; galvanized crosswise steel angle as forklift and hinge protection, pallet stop on both sides approx. 15–20 mm high, bolted design, loading height reduced by approx. 15–20 mm. Axles & Suspension SAF disc brake axles with 430 mm disc diameter, "axles/chassis laser aligned" for reduced tire wear and fuel consumption; air suspension, without lift axle. Braking system: 2-line air braking system with color-coded lines for easy maintenance. Spring-loaded parking brake. 2 fail-safe coupling heads at the front, without connection lines, Haldex EBS, electronic braking system with EBS socket at the front (no connection cable), with lift & lower valve. Vehicle stability control system, brake pad wear indication via EBS CAN bus signal for display in the cab (truck must be suitably equipped), axle load detection via EBS CAN bus signal for display in the cab (truck must be suitably equipped; no truck installation, not certified scales). Haldex TPMS tire pressure monitoring system via EBS, without truck installation (requirements in the truck must be met). Electrics: 24 Volt, multi-chamber LED rear lights with resistor, yellow LED side marker lamps, LED license plate lighting. 2 white position lights at the front, 2 white/red lane indicator lights at the rear, 1 x 15-pin socket at the front, no connection cable, additional LED work light at the rear operated via reversing light. Floor: Phenolic plywood panels approx. 30 mm thick, on longitudinal supports for high point load capacity, suitable for forklift axle loads up to max. 7100 kg. Front wall / corner posts at front: 2, 580 mm high, steel corner posts with high-volume design, release mechanism for side curtain at front wall. "Crash blocker": steel rear underrun protection inside at approx. 140 mm height. Center posts: 2 pairs of sliding posts, adjustable along the entire length, with four insertion pockets and long pocket at the bottom. 2 pairs of post positions. Insert slats: 5 rows of aluminum V-insert slats. Rear wall / corner posts at rear: Rear corner posts steel up to bottom edge of roof, tarp attachment with round tube and curtain tension ratchet. Rear portal doors, double-leaf, each with 2 internal locking rods. Iedpfoy Tvwxex Aicoic Curtain: Curtain tarpaulin with welded horizontal and vertical belts, stainless steel tension locks. Roof: Sliding roof, rear end-lift folding up, curtain can be slid from rear to front, L-roof beam for automotive industry, internal width between roof rails approx. 2490 mm, curtain color: white. Roof is non-elastic—virtually no roof beam deflection when loading and unloading. Anti-ice system with one center hose, automatic forced ventilation via brake light, optimal rain gutter at rear (top of end spar above doors). The images shown are archive images; the vehicle may still be in use!

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, From ongoing production Gross weight: 24,000 kg / 30,000 kg Unladen weight: 6,100 kg Payload: 17,900 kg / 23,900 kg Overall length: 10,890 mm Loading length: 8,670 mm total, 2,520 mm gooseneck, 6,500 mm loading deck Width: 2,520 mm Loading height: 860 mm Additional information Steel welded construction Turntable with heavy-duty slewing ring Foldable rear supports Wheel chocks with holder Aluminum side underrun protection Full-width rear spray flap (not compatible with forklift holder) Half-shell mudguards on 1st axle with anti-spray flaps Anti-spray flaps behind 2nd and 3rd axles Plastic toolbox Extendable width up to 3,000 mm Storage compartment for timber planks positioned centrally on the loading area 70 mm timber planks for widening to 3,000 mm Tie-down points for low-loader 1 pair of lashing cut-outs in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes on the outer frame of the gooseneck, each 5 t (for attaching tension belts) 7 pairs of lashing mushrooms flush-mounted on top and on the sides of the outer frame, each 10 t 1 in front on the gooseneck, 6 in the low-bed Pairs of ring lashings flush-mounted in the outer frame, each 5 t (can be converted to stake pockets) Additional pairs of folding lashing points, each 10 t 1 on the gooseneck 1 recessed in the floor behind the last axle Drawbar equipment for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring Axles and suspension Drum brake axles, manufacturer’s choice “Axle/chassis laser alignment” for reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker balancer) Wheels and tires 235/75 R 17.5" manufacturer’s choice Steel twin wheels, factory silver Braking system Dual-line compressed air brake system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connector lines to the tractor unit 24 V ABS and ALB, with ABS plug at the front and connecting cable Electrics 24 V, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable LED beacon with holder, switched via parking light (removable beacon) Pair of double warning boards, LED-illuminated and extendable to 3,000 mm Iiodpfeuytx Sjx Aicjc Floor Gooseneck at front with steel/chequer plate decking Storage compartment recessed into the transition slope to the gooseneck Then approx. 70 mm softwood floor, in wheel arch area with steel/chequer plate decking Rear bevel with 70 mm softwood floor Low bed area including rear bevel 6,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional lower ramp safety (prevents lateral slippage of ramps, not compatible with side hydraulic ramp adjustment) Wooden covering (tip area with steel/chequer plate) Hydraulic operation via tractor PTO with restrictor, operation on driver side left Hydraulic connection with SVK plug NW 10/3, incl. connection hose Paintwork Frame hot-dip galvanized including passivation Access ramps hot-dip galvanized plus freight / provision ex works 26639 Wiesmoor: €1,280.00 net

Stanje: novo, največja dovoljena obremenitev: 29.500 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna širina: 2.550 mm, Vehicle is from current production - available in approx. 2 weeks Vehicle / Body: Tipping Trough Gross Weight: 35,000kg / 39,000kg Unladen Weight: 5,500kg !!! Payload: 29,500kg / 33,500kg Total Length: 8,600mm Iijdpfx Aovhyf Roicsc Volume: 25 cbm Further Information: - Overall height approx. 3,160mm - Internal width approx. 2,350mm - Coupling height approx. 1,200mm Chassis – Semi-Trailer Tipper: - Fine-grained steel welded construction, basic lightweight design - 1x centre support leg - Folding underrun protection - Underrun protection with "spring assistance" for easier operation - Half-shell mudguards - Integrated “mudguard holder” with a stone-repellent surface - With antispray mud flaps only on the rear axle - 2 towing hooks at the rear Axles & Suspension: - SAF disc brake axles with 430 mm disc diameter - “Axle/chassis laser measured" for reduced tyre wear and fuel consumption - Axles in off-road specification - Air suspension - Air bag pressure gauge, mounted front on curved chassis - 1st axle is an automatic lift axle, also electrically operable from the truck, including forced lowering and start-off assist, without truck installation (start-off assist is functional up to 30% axle overload and up to a max. speed of 25 km/h) Braking System: - 2-line compressed air brake system Coloured line routing for easy servicing. - Spring-actuated parking brake - 2 front foolproof coupling heads, without connecting line - 24 volt EBS, Electronic Braking System with EBS socket at the front, without connection cable - With raise & lower valve - Vehicle stability control system - Automatic tip lowering with shut-off valve Wheels and Tyres: - 6 x 385/65 R22.5" European brand, manufacturer’s choice Electrics: - 24 volt, multi-chamber LED lights, side yellow LED marker lights, number plate illumination in LED (Note: with some tractors, diagnostic errors may occur even though functions are correct) Side yellow LED lighting linked with indicator - "flashing side marker lights" - Premium LED side marker lamps, each with 20 LEDs per unit - 2 white front position LED lights included - 2 white/red lane control rear LED lights included - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, no connection cables - LED working lights mounted on both sides (activated via reverse light) - 2 additional LED work lights recessed at rear Hydraulics: - High-pressure cylinder max. 250 bar, smallest stage hard chromed, with HDK screw coupling, fixed part, NW 48 mm - Hyva make - Operated hydraulically via truck PTO - Hydraulic connection with hose and vehicle plug NW = 54 mm with large wing nut Tipping Body: HARDOX steel round trough in “Stone Master Design” of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mount. Interior with ladder at front wall - Greenline – conical, aerodynamic body design - Shovel and broom holder on exterior front wall - "Membrane" tailgate - Tailgate as pendulum flap with "double-joint hinge", externally mounted with dual hook lock. 2 clamping bolts with toggle locks at the bottom on each side - Tailgate with rubber seal Note: Heat-resistant up to max. 170°C! - Continuous sidewalls 4 mm thick, floor 4/5 mm thick, wear- and weight-optimised structure - Fliegl S.T.E.P. – swivelling platform at front with folding ladder for side access LH side,

Stanje: rabljeno, največja dovoljena obremenitev: 13.940 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/1996, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 6.780 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.150 mm, skupna širina: 2.450 mm, Dodatne informacije - Pnevmatsko nastavljiva vlečna ojla - Plastična orodjarna - Shranjevalni prostor - Zaščita proti podletu - BPW osi - Dvojna montaža pnevmatik - Zaščita proti podletu Iiodpfxjy Hzvae Aicec

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Curb weight: 5,600kg Payload: 18,400kg / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Additional information: Plus pre-carriage / handling from storage location 26639 Wiesmoor: €1,280.00 net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race bearing Folding rear support Wheel chocks with holder Rear mudflaps across full width Iisdpfowlmr Dsx Aicjc 1 plastic toolbox Preparation for widening to 3,000 mm (holes in outer frame with covers, not in rear bevel) Lashing rings for low-bed trailer 1 pair of lashing openings in the front beam on the cranked section, each rated 10 t 7 pairs of lashing pins recessed in the top and side of the outer frame, each rated 10 t 1 x in front on the cranked section 5 x in the low-bed section 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for securing straps) 5 x cranked section, 6 x low-bed, 1 x rear bevel Drawbar coupling (for turntable trailer) Drawbar with tested 40 mm towing eye Height adjustment of drawbar by spring Axles & suspension: Drum brake axles, manufacturer’s choice Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushing and mechanical load equalization (rocker equalizer) Wheels and tires: 235 / 75 R 17.5” manufacturer’s choice Steel rims, dual arrangement, factory silver Brake system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, lines extended by approx. 60 cm Without ABS, but with mechanical ALB; maximum approved speed 60 km/h Electrics: 12 Volt, multi-chamber lights, no side LED (yellow) lighting, reflectors on side 2 white position lights at front 2 white/red marker lights at rear 1 x 7-pin 12 Volt plug at front, with connection cable, extended by approx. 60 cm 1 LED beacon with holder, switched via sidelights (lamp removable) 2 pairs of warning plates, double LED illuminated and extendable to 3,000 mm Floor: Cranked section at front with steel / checker plate covering Stowage box recessed in the ramp transition near the cranked section Then with 70 mm softwood flooring, steel / checker plate in the wheel arch area Rear bevel with 70 mm softwood floor Low-bed area incl. rear bevel 5,900 mm Ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood covering (front edge with steel/checker plate) Hydraulically operated via tractor PTO with throttle, operation LH side compartment Hydraulic connection with SVK plug NW 10/3, incl. hose Operating notes: For 10,000 kg axle load, a special permit is required, only indivisible loads allowed! The stated total weight is technically possible; depending on the load, it may not be possible to achieve total weight while complying with permissible axle, support, and kingpin loads. (Poor driving and tracking performance possible due to incorrect load distribution) Country of registration / Signs: Registration country: Germany With Dekra inspection and certificate, for max. 60 km/h approval, towing vehicle LoF (agricultural/forestry), (Switzerland max. 40 km/h approval possible) Prepared for double-line license plate holder Without contour marking / reflective tape per ECE R 048 Paintwork: Frame RAL 7021, black-grey "10 years warranty against rust-through" Drawbar hot-dip galvanized Ramps hot-dip

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl 4-Axle Low Loader Trailer with Ramps, Model VTS 400 Gross weight: 24,000kg / 40,000kg Unladen weight: 8,080kg Payload: 15,920kg / 31,920kg Total length: 11,940mm Total loading length: approx. 10,410mm; Gooseneck: approx. 2,490mm; Loading platform incl. rear bevel: approx. 7,920mm Width: 2,550mm Loading height: 900mm Additional information plus delivery/preparation from stock location 26639 Wiesmoor: €1,280.00 net Leasing offer: term 48 months, down payment only VAT, residual value 40% Monthly instalment EUR 759.00 Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap Half-shell mudguards on axle 1 + 2 with anti-spray flaps behind each axle Anti-spray flaps before and behind axles 3 and 4 Excavator arm recess over rear axles, stretching to the rear, approx. 1,800mm long, 650mm wide, 150mm deep 2 pairs of lashing holes (5t each) in the excavator arm recess, side-mounted on the longitudinal frame, approx. 300mm from the front and approx. 200mm before the rear bevel 1 plastic toolbox, w=600mm / h=425mm / d=460mm, lockable Storage box recessed into the gooseneck floor with lid, w=720mm / l=520mm / d=170mm Extendable widenings to 3,000mm (not at rear bevel) (Note: the track width of machines or vehicles being transported must not exceed the outer frame width of 2,550mm) Wooden plank compartment under the low-bed platform 70mm wooden planks for extension to 3,000mm Low loader lashing points 1 pair of lashing cutouts sunk in the longitudinal beam at the front of the gooseneck, 10t each 4 pairs of lashing holes in external frame (5t each, suitable for tension belt attachment) 9 pairs of lashing mushrooms set into the external frame above and on the sides, each 10t 2x front on gooseneck 7x low-bed area 1st lashing point 250mm from front, last max. 250mm from rear, max distance between lashing points 1,100mm 3 additional pairs of folding lashing eyes, 10t each: - 1x on gooseneck (protruding) - 1x inside start of low-bed area in longitudinal beams - 1x recessed in floor behind last axle Towing arrangement, turntable trailer Isdpfx Ajvv D Ixjicsic Drawbar with certified 50mm draw eye Drawbar height adjustment via spring Axles & Suspension Drum brake axles, manufacturer’s choice Chassis/axle laser alignment (reduces tyre wear and fuel consumption) Air suspension with raise & lower valve + auto reset function Wheels and tyres 235/75 R 17.5”, manufacturer’s choice Steel twin wheels, factory silver Braking system 2-line pneumatic brake system Spring-loaded parking brake Axle load detection via EBS CAN-Bus signal (for in-cab display, truck must be pre-equipped, not a calibrated scale) Vehicle stability system 2 foolproof coupling heads at the front, with connecting lines to tractor unit 12-24V EBS (Electronic Braking System) with EBS plug at the front and connecting cable (Knorr brand) Note: Trailer must only be towed by towing vehicles capable of ensuring full ABS functionality! Electrics 12-24V, multi-chamber LED lamps, amber LED side markers, LED license plate lighting (Note: On certain tractor units, malfunction messages may appear even if operational) 2 white position lights at the front (LED) 2 white/red contour marker lights at the rear (LED) 2x 7-pin foolproof connectors at the front

Stanje: novo, največja dovoljena obremenitev: 17.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.670 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, New vehicle: Fliegl 3-axle low-loader trailer with ramps, model DTS 300 Vehicle fully hot-dip galvanized Gross weight: 24,000kg / 30,000kg Unladen weight: 6,100kg Payload: 17,900 / 23,900kg Overall length: 10,890mm Loading length: total 8,670mm; 6,500mm low bed including rear bevel / 2,170mm gooseneck Width: 2,520mm Loading height: 860mm Further information: plus freight/preparation ex stock location 26639 Wiesmoor, EUR 1,280.00 net Leasing offer: Term 48 months, down payment only the VAT. Residual value 40% Monthly installment: EUR 569.00 Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflaps (not in combination with forklift mounting) Semi-shell fenders on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extendable outriggers to 3,000 mm (not at rear bevel). (Track width of construction machinery or vehicles to be transported must not exceed outer frame width of 2,550 mm) Central storage compartment for wooden planks on the loading area 70 mm wooden planks for extension to 3,000 mm Lashing points for low-loader 1 pair of lashing cutouts in the front longitudinal beam on the gooseneck, each 10 t 4 pairs of lashing holes in the outer frame of the gooseneck, each 5 t (for attaching tie-down straps) 7 pairs of inlaid lashing rings on top and side of outer frame, each 10 t (1 at gooseneck front, 6 in low bed) First lashing ring 250 mm from front and last max. 250 mm from rear, lashing point spacing not greater than 1,100 mm 5 pairs of inlaid ring lashing points in outer frame, each 5 t (convertible to stake pockets) 2 additional pairs of foldable lashing rings, each 10 t (1 at gooseneck - protruding, 1 recessed in floor behind last axle) Drawbar assembly for turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment via spring mechanism Iiedpev D T R Esfx Aicsc Axles & Suspension Drum brake axles, brand per manufacturer’s choice Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension with raise & lower valve Wheels and tires 235/75 R 17.5'', per manufacturer’s choice Steel twin wheels, factory silver finish Braking system Dual-line compressed air brake system Spring-operated parking brake Vehicle stability control system Axle load detection via EBS-Canbus signal for display in cab (truck must be pre-equipped, not installed/no certified scale) 2 non-interchangeable coupling heads at front with connection lines to tractor unit 24V EBS, electronic braking system with EBS connector at front and connecting cable Note: The trailer may only be towed by towing vehicles that ensure proper ABS function! Electrics 24V, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane control lamps at rear 2 x 7-pin non-interchangeable connectors at front, with connection cable 1 LED revolving beacon with holder, switched via parking light, removable 2 pairs of warning panels, double LED-lit and extendable to 3,000mm Floor Gooseneck front with steel/chequer plate cover Storage compartment recessed in gooseneck ramp Subsequent area with approx. 70 mm softwood floor, wheel arch area with steel/chequer plate Rear bevel with 70 mm softwood flooring Low-loader platform including rear bevel: 6,500mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, side mounted

Stanje: novo, največja dovoljena obremenitev: 18.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 5.900 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 860 mm, skupna širina: 2.520 mm, Total weight: 24,000kg / 30,000kg Unladen weight: 5,600kg Payload: 18,400 / 24,400kg Overall length: 10,290mm Loading length: 5,900mm incl. rear bevel Width: 2,520mm Loading height: 860mm Further information: plus pre-carriage / provision ex storage location 26639 Wiesmoor: €1,280.00 / net Chassis Low-bed trailer Steel welded construction Turntable with robust ball bearing ring Rear support, foldable 2 wheel chocks with holders Rear splash guards full width (not in combination with forklift holder) 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Prepared for widening to 3,000 mm (holes in outer frame with covers, not in the rear bevel) Tie-down points low loader 1 pair of lashing cutouts recessed in front longitudinal member on cranked section, each rated 10 t 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each 10 t 1 x at the front on the cranked section 5 x in the low-bed 1 x in the rear bevel 12 pairs of lashing holes in the outer frame, each rated 5 t (for lashing strap hooks) 5 x cranked section, 6 x low-bed and 1 x rear bevel Drawbar equipment Turntable trailer Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles + Suspension Drum brake axles by manufacturer’s choice "Axles / chassis laser aligned" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker balancing) Wheels and Tires 235 / 75 R 17.5" by manufacturer’s choice Steel twin rims, factory silver Braking system 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with extension lines to engine vehicle, extension approx. 60 cm Without ABS, but with mechanical ALB, thus max. 60 km/h permitted Electrics 12 volts, multi-chamber lights, without lateral yellow LED lighting, side reflectors 2 white position lights front 2 white/red lane marker lights rear 1 x 7-pin 12V plug front, with extension cable approx. 60 cm 1 LED beacon with bracket, switched via sidelights (removable light) 2 pairs warning plates illuminated, extendable to 3,000 mm Floor Cranked section front with steel/chequer plate covering Stow box recessed in transition bevel to cranked section then approx. 70 mm softwood floor, in wheel arch area steel/chequer plate Rear bevel with 70 mm softwood floor Low-bed loading area incl. rear bevel 5900 mm Ramps Steel ramps approx. 3000 mm long, 750 mm wide, side-shiftable with timber covering (front area with steel/chequer plate) Hydraulic via tractor auxiliary drive with restrictor, operation side FR left Hydraulic connection with SVK plug NW 10/3 incl. connector hose Operating notes At 10,000kg axle load, an exemption permit is required, only indivisible loads permitted! The indicated total weight is technically possible; depending on the cargo, the permissible axle, support, and kingpin loads may not be reached (poor handling and tracking possible if load distribution is incorrect) Country of registration / plates Country of registration: Germany Iiodpfxsynvrws Aicjc With Dekra approval and certificate, for max. 60 km/h registration, towing vehicle agricultural/forestry, (country of registration Switzerland max. 40 km/h possible) prepared for double-line license plate holder without outline marking / reflective strips according to ECE R 048, Paintwork Frame hot-dip galvanized incl. passivation "15 year warranty against penetra—"

Stanje: novo, največja dovoljena obremenitev: 31.920 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with ramps, model VTS 400 Gross weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Overall length: 11,940 mm Loading length: total approx. 10,410 mm; neck approx. 2,490 mm; loading bed incl. rear taper approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Further information: Plus pre-freight / preparation ex stock 26639 Wiesmoor: €1,280.00 / net Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear mud flap Half-shell mudguards, 1st and 2nd axles with anti-spray flaps behind each axle, Anti-spray flaps in front of and behind 3rd and 4th axles Excavator stick trough over rear axles to the rear, approx. 1,800 mm long, 650 mm wide, 150 mm deep 2 pairs of lashing holes, each 5 t, in the excavator stick trough on the longitudinal frame, approx. 300 mm from the front and 200 mm in front of the rear slope 1 plastic toolbox, w=600 mm / h=425 mm / d=460 mm, lockable Iiodpfsxrx Nljx Aicoc Storage box recessed in the neck floor with lid, w=720 mm / l=520 mm / d=170 mm Extendable outriggers to 3,000 mm (not for rear slope) (Track width of construction machinery/vehicles to be transported must not exceed external frame width of 2,550 mm) Storage compartment for wooden planks under the low-bed deck Wooden planks, 70 mm, for extension to 3,000 mm Lashing points, low-loader: 1 pair of lashing cutouts in the front longitudinal beams, embedded in the neck, each 10 t 4 pairs of lashing holes in the outer frame, each 5 t (for attaching ratchet straps) 9 pairs of lashing mushrooms, embedded in and above the outer frame, each 10 t: - 2 × on the neck - 7 × in the low-bed section First lashing point 250 mm from the front, last max. 250 mm from the rear; lashing point spacing max. 1,100 mm Additionally, 3 pairs of folding lashing eyes, each 10 t: - 1 × on the neck (protruding) - 1 × at the start of the low-bed inside the longitudinal beams - 1 × in the floor behind the last axle Drawgear, turntable trailer: Drawbar with certified 50 mm eye Drawbar height adjustment via spring Axles & Suspension: Drum brake axles, per manufacturer’s choice "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension with lift & lower valve + auto-reset function Wheels and Tyres: 235 / 75 R 17.5", per manufacturer’s choice Steel twin wheels, factory silver Braking system: 2-line air-operated brake system Spring-loaded parking brake Axle load detection via EBS CAN bus signal for display in truck cab (truck must be equipped accordingly; not a calibrated scale) Vehicle stability system: 2 non-interchangeable coupling heads at the front, connection lines to the tractor 12-24V EBS, electronic braking system with EBS socket at the front, including connecting cable (Knorr brand) Attention: The trailer may only be towed by vehicles that guarantee ABS functionality! Electrics: 12-24V, multi-chamber LED lights, side LED marker lights (yellow), LED license plate lighting (Note: Some towing vehicles may display incorrect errors despite proper function) 2 white front position lights, LED 2 white/red rear lane marker lights, LED 2 × 7-pin non-interchangeable sockets at the front, with connection cable 1 LED rotating beacon with bracket, switchable via sidelights (removable beacon) 2 pairs...