Unsinn Gtp 2630-14-1750 Mit Laubgitter, 306X175X35Cm nakup rabljenega (14.277)

Stanje: rabljeno, prevoženi kilometri: 117.555 km, moč: 350 kW (475,87 KM), prva registracija: 05/2009, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: srebrn, emisijski razred: Euro 5, Leto izdelave: 2008, Oprema: ABS, klimatska naprava, parkirni grelec, pogon na vsa štiri kolesa, žerjav, Special equipment: Trailer brake, 2-line, trailer coupling: G 150, trailer socket 24V / 15-pin, audio system: CD radio (Bluetooth), battery 220 Ah, aluminum air reservoir, air horn, cab: movable entrance, cab: comfort suspension (1.8 Hz), generator 100 A, noise reduction measure 80 dB(A), graphic information display with eco-meter, automatic climate control, light and rain sensor, 2-cylinder air compressor, high-speed fan belt drive, illuminated Mercedes star, auxiliary drive MB 2C, programmable special module, rotating warning beacon left/right, circuit breaker, driver cab seats: comfort driver's air-sprung seat including horizontal suspension, sun visor, sun protection blinds for side windows, driver and passenger door, cab socket 24V, stone guard mesh, front bumper made of steel, automatic daytime running lights, cross member for trailer coupling, reverse warning signal, additional thermal insulation, supplementary air heater, gearbox oil cooler Further equipment: 2nd steered front axle, EURO 5 emission standard, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: tow coupling, vertical muffler behind the cab, electrically adjustable and heated exterior mirrors, roof hatch (steel), rear axle differential lock, front axle differential lock, cab: M (medium length), suspension: leaf/leaf, electric windows, 16-speed transmission, rear axle H 7, 13 t, crown wheel 300, hydraulic pump (Meiller pump - 6 pistons), body/chassis: chassis for tipper (additional AV), body/chassis: tipper, fuel tank: 300 l, model revision as of 06/2008, engine 12.0 l - 350 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, voltage converter 24V/12V 8 A, steel rims 9.00x22.5, Telligent gearshift, Telligent brake system with ABS, drum brake front and rear axle, transfer case - with differential lock, CB radio preparation, telephone/fax preparation, immobilizer, heat-insulating glazing, central locking incl. key, permissible gross weight 41.00 t Our offer is generally without MOT/inspection/SP approval and license plates Errors and prior sale excepted Gedpfxswz Du Is Acgsbl Viewings by appointment only WhatsApp inquiries will not be answered

Stanje: rabljeno, prevoženi kilometri: 117.555 km, moč: 350 kW (475,87 KM), prva registracija: 05/2009, vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: srebrn, emisijski razred: Euro 5, Leto izdelave: 2009, Oprema: ABS, klimatska naprava, parkirni grelec, pogon na vsa štiri kolesa, Special equipment: Trailer brake 2-line, trailer coupling: G 150, trailer socket 24V / 15-pin, audio system: CD radio (Bluetooth), 220 Ah battery, aluminum air tank, air horn, cab access: movable cab entry, cab: comfort suspension (1.8 Hz), 100 A alternator, noise reduction measure 80 dB(A), graphic info display with EcoMeter, automatic climate control, light and rain sensor, 2-cylinder air compressor, high performance drive belt fan, illuminated Mercedes star, PTO MB 2C, programmable special module, rotating beacon left/right, circuit breaker, cab seats: driver's seat air suspension comfort seat with horizontal suspension, sun visor, sun protection roller blinds side windows, driver and passenger door, 24V socket in cab, stone chip protection grille, front bumper made of steel, automatic daytime running lights, crossmember for trailer coupling, reverse warning alarm, additional thermal insulation, auxiliary air heater, transmission oil cooler Additional equipment: 2nd front axle steered, emission standard EURO 5, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: tow coupling, upright exhaust behind cab, exterior mirrors electrically adjustable and heated, steel roof hatch, rear axle differential lock, front axle differential lock, cab: M (medium length), suspension: leaf/leaf, electric windows, 16-speed gearbox, rear axle H 7, 13 t, crown wheel 300, hydraulic pump (Meiller pump - 6 pistons), body/superstructure: chassis for tipper (additional AV), body/superstructure: tipper, fuel tank: 300 liters, facelift from 06/2008, engine 12.0 L - 350 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, voltage converter 24V / 12V 8 A, steel rims 9.00x22.5, Telligent gearshift, Telligent brake system with ABS, drum brake front and rear axles, transfer case with differential lock, CB radio pre-installation, telephone / fax pre-installation, immobilizer, heat-insulating glass, central locking including key, gross vehicle weight 41.00 t Our offer is generally without main inspection/emissions test/safety test and registration Errors and prior sale excepted Viewing by appointment only WhatsApp inquiries will not be answered Gbodpjwkdd Ujfx Acgel

Stanje: rabljeno, prevoženi kilometri: 25.552 km, prva registracija: 07/1996, skupna masa: 7.490 kg, lastna masa: 4.920 kg, barva: rdeča, konfiguracija osi: 4x2, zavore: zaviranje z motorjem, vrsta prenosa: mehanski, gorivo: dizel, vrsta goriva: dizel, emisijski razred: noben, moč: 103 kW (140,04 KM), največja dovoljena obremenitev: 2.570 kg, naslednji pregled (TÜV): 08/2026, vzmetenje: jeklo, velikost pnevmatike: 9,5 R17,5, velikost sprednje pnevmatike: 9,5 R17,5, velikost zadnje pnevmatike: 9,5 R17,5, število sedežev: 9, voznikova kabina: drugo, največja hitrost: 96 km/h, Oprema: dodatne luči, kabina, meglenke, osvetlitev, registracija tovornjaka, spojka prikolice, zavorni sistem na stisnjen zrak, zaščita za glavo, šasija, MB LF 8/6 gasilsko vozilo s karoserijo ZIEGLER v TOP stanju * dolgo vozilo s kabino za 9 oseb (DoKa) * listnato vzmetenje * diferencialna blokada * pretvornik napetosti * modra rotacijska luč in Martinova hupa delujeta * delovna žarometa * motorna zavora * vzmeten voznikov sedež Gbsdpjy Nm Dnefx Acgjl * 6-stopenjski ročni menjalnik * ogrevana zunanja ogledala * meglenke * Ringfeder vlečna kljuka * električni priključek / 24/12 V * priključek za polnjenje akumulatorja * Pnevmatike: 9,5R R17.5, rezervno kolo * ZIEGLER nadgradnja * Črpalka FP8/8 * Teže: GG- 7.490 kg, LG- 4.920 kg, NL- 2.570 kg * Nemško vozilo z nemškimi papirji!! * Zelo lepo stanje - brez opozorilnih lučk!! * Prvi lastnik!! * Prva registracija: 02.07.1996 * Tehnični pregled do 08.2026 * VIN: WDB6740851K187072 Vmesna prodaja, napake in spremembe so pridržane! Na nekaterih slikah so bili logotipi podjetja odstranjeni - prosim povprašajte! Delovanje dodatne opreme brez jamstva! Vaša kontaktna oseba: Marcel Schwämmle Tel. + WhatsApp:

Stanje: rabljeno, prevoženi kilometri: 25.552 km, prva registracija: 07/1996, skupna masa: 7.490 kg, lastna masa: 4.920 kg, barva: rdeča, konfiguracija osi: 4x2, zavore: zaviranje z motorjem, vrsta prenosa: mehanski, gorivo: dizel, vrsta goriva: dizel, emisijski razred: noben, moč: 103 kW (140,04 KM), največja dovoljena obremenitev: 2.570 kg, naslednji pregled (TÜV): 08/2026, vzmetenje: jeklo, velikost pnevmatike: 9,5 R17,5, velikost sprednje pnevmatike: 9,5 R17,5, velikost zadnje pnevmatike: 9,5 R17,5, število sedežev: 9, voznikova kabina: drugo, največja hitrost: 96 km/h, Oprema: dodatne luči, kabina, meglenke, osvetlitev, spojka prikolice, zapora diferenciala, zavorni sistem na stisnjen zrak, zaščita za glavo, šasija, MB LF 8/6 gasilsko vozilo s karoserijo ZIEGLER v TOP stanju * dolgo vozilo s kabino za 9 oseb (DoKa) * listnato vzmetenje * diferencialna blokada * pretvornik napetosti * modra rotacijska luč in Martinova hupa delujeta * delovna žarometa * motorna zavora * vzmeten voznikov sedež * 6-stopenjski ročni menjalnik * ogrevana zunanja ogledala * meglenke * Ringfeder vlečna kljuka * električni priključek / 24/12 V * priključek za polnjenje akumulatorja * Pnevmatike: 9,5R R17.5, rezervno kolo * ZIEGLER nadgradnja * Črpalka FP8/8 * Teže: GG- 7.490 kg, LG- 4.920 kg, NL- 2.570 kg * Nemško vozilo z nemškimi papirji!! * Zelo lepo stanje - brez opozorilnih lučk!! * Prvi lastnik!! Gbedpey Nl Hbofx Acgel * Prva registracija: 02.07.1996 * Tehnični pregled do 08.2026 * VIN: WDB6740851K187072 Vmesna prodaja, napake in spremembe so pridržane! Na nekaterih slikah so bili logotipi podjetja odstranjeni - prosim povprašajte! Delovanje dodatne opreme brez jamstva! Vaša kontaktna oseba: Marcel Schwämmle Tel. + WhatsApp:

Leto izdelave: 2014, stanje: rabljeno, For inquiries regarding the attachment, Mr. Herden (by phone) will be happy to assist you. stabau Roller Rails S1-RGSCH 100 / 4 t load capacity / Year of manufacture: 2014 / in stock & immediately available / very good condition Price per pair: €2,390.00 net / €2,844.10 gross Load capacity: 4,000 kg Load center: 1,500 mm Dead weight: 689 kg (total set) Overall length: 3,000 mm Overall width: 450 mm Exact pocket dimensions can be found in the attached images. We have a very large selection of various attachments in stock, all ready for immediate delivery! Mr. Herden (phone) will be glad to assist you. If desired, we can also provide you with a financing offer. We are an official sales and service partner for the following brands: - Magni telehandlers - Holp - Gierking GMT - OilQuick - Weber MT - Westtech - DMS - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco Gbjdpfxoy Nv Ene Acgsl Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We offer the complete Magni range for you! Errors and prior sale excepted. Internal ID: 141072 = Further information = Unladen weight: 689 kg Suitable for: machines for loading and unloading Please contact Marius Herden for more information.

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * External, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right exterior on the bulkhead * Lateral underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet steel bulkhead * Drop sides made of trapezoidal-profiled steel, foldable with drop-side lifting aid * Rear wall made of steel, can be inserted between ramps - storage bracket inside in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Optional installation of 3 t recessed lashing rings every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing ring * Various holes in the front and rear cross members for 1.2 t lashing points * Profifix lashing rail along the center longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm Gsdpfx Aeq Dyvvocgebl ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall * Drop side color in RAL 9010 pure white * Painting of the side walls in any RAL shade available at extra cost ----Information: * --Reinforced and certified body to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 29/2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with compensating unit ----Drawbar / Flange drawbar eye: Gsdpfxervvfle Acgebl * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (tire pressure monitoring system) * LED lighting ----General attachments: * Jost landing leg at the front * Externally mounted, hot-dip galvanized drop-down support legs at the rear * Plastic toolbox, mounted front right on the bulkhead * Side impact protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted bulkhead in smooth sheet metal * Trapezoidal profile steel side walls, foldable with side wall spring assist * Steel rear wall, slidable between the ramps – storage bracket inside the bulkhead when not in use * Screwed-in rear stanchions ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings possible every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and rear cross members for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis (center), lashing option up to LC 3,000 daN ----Ramps: * Single-piece mechanical mesh approach ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed down to 20 mm) * Rear drive-up angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear panel * Side wall color RAL 9010 pure white * Painting of the side walls in a different RAL color available at extra cost ----Information: * --Reinforced and certified construction according to EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 29/2026

Stanje: rabljeno, prevoženi kilometri: 544.347 km, moč: 250 kW (339,91 KM), prva registracija: 01/2000, vrsta goriva: dizel, skupna masa: 17.990 kg, konfiguracija osi: 2 osi, barva: oranžna, vrsta prenosa: mehanski, emisijski razred: euro2, Oprema: pogon na vsa štiri kolesa, žerjav, * Scania P114CB 4x4 pogon na vsa kolesa * 3-stranski kiper s posipalcem soli * Spredaj vzmetenje z listnatimi vzmetmi * Zadaj zračno vzmetenje * Ročni menjalnik s razdelilnikom * FIN: XLEP40004420844 * Tip motorja: 5770175 * KW: 250 * Delovna prostornina: 10.600 ccm * Lastna teža: 11.315 kg * Nosilnost: 6.450 kg * Skupna masa: 17.990 kg * Medosna razdalja: 3.900 mm * Dolžina kiperja: 4,10 m * Širina kiperja: 2,40 m * Dolžina vozila: 7.450 mm * Širina vozila: 2.084 mm * Višina vozila: 3.500 mm * Pnevmatske gume: 315 / 80 R 22,5 * Snežni plug z nastavkom * Zimska oprema * Širina snežnega pluga: 3,60 m * Dvigalo: Hiab 085 * Serijska številka: 0617 * 2 hidravlični podaljški * Daljinsko upravljanje * Leto izdelave: 1999 * Cena brez DDV Gbjdjkq Apwspfx Acgol * Vse informacije brez garancije Tel./WhatsApp:

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 483.588 km, moč: 169 kW (229,78 KM), prva registracija: 12/2003, vrsta goriva: dizel, lastna masa: 11.440 kg, največja dovoljena obremenitev: 7.160 kg, skupna masa: 18.600 kg, velikost pnevmatike: 315/70R22.5, konfiguracija osi: 4x2, medosna razdalja: 3.550 mm, naslednji pregled (TÜV): 11/2026, gorivo: dizel, zavore: retarder, barva: zelen, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 3, vzmetenje: zrak, prostornina tovornega prostora: 14,1 m³, Leto izdelave: 2003, obratovalna teža: 18.600 kg, Oprema: ABS, airbag, centralno zaklepanje, dodatne luči, električno nastavljivo ogledalo, filter saj, hidravlika, kabelska vitla, klimatska naprava, meglenke, nizka raven hrupa, parkirni grelec, popolna servisna zgodovina, registracija tovornjaka, servovolan, tempomat, zapora diferenciala, Model: SCANIA P94DB4X2NB230 with NORBA RL200 14.1m³ Body: NORBA RL200 Volume: 14.1 cubic meters Year of body manufacture: 2014 First registration: 05.12.2003 Mileage: 483,588 km (original) Engine power: 169 kW Hydraulics (PTO) Auxiliary heater Antennae Radio/Cassette/CD/MP3 Air conditioning 1x Air-suspended seat with seat heating, fully adjustable Electric windows Electrically adjustable exterior mirrors Multifunction steering wheel Speed limiter Sun visor Work lights Fog lights High-beam headlights Hazard light Storage box Aluminum fuel tank Emission class: EURO3 Retarder/Intarder/Engine brake Axle configuration: 4x2 Differential lock Wheelbase between axles 1 and 2: 3,550 mm Tire size axle 1 (front): 315/70R22.5 Tire size axle 2 (rear): 315/70R22.5 Air suspension / Air suspension Wheel covers Unladen weight: 11,440 kg Payload: 7,160 kg Gross vehicle weight: 18,600 kg Overall vehicle dimensions (L x H x W): 765 cm x 315 cm x 260 cm Our vehicles are generally offered with valid TÜV and AU in the listings. Usually, these are foreign inspection certificates which are sufficient for the issuance of export plates. For a valid TÜV and AU certificate according to the German standard, please contact us individually. Feel free to contact us for more information and photos via WhatsApp, Telegram, Viber, and Signal. Please call us directly or send us a message via WhatsApp! Deutsch (German): Wir sprechen Deutsch und Englisch, aber Sie können uns gerne in Ihrer Sprache eine Nachricht schicken! English: We speak German and English, but feel free to send us a message in your language! Español (Spanish): Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Português (Portuguese): Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! Français (French): Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue ! Italiano (Italian): Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Русский (Russian): Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! Gbedpey Rz Ukofx Acgsl العربية (Arabic): نحن نتحدث الألمانية والإنجليزية، لكن لا تتردد في إرسال رسالة إلينا بلغتك! دری (Dari): ما به آلمانی و انگلیسی صحبت می‌کنیم، اما می‌توانید پیام خود را به زبان خود برای ما ارسال کنید! Trade-in possible! Net price! We can deliver your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. We can ship the vehicle for you worldwide! Export license plates on request! We support you with export processing, original data confirmation for country homologation, supplier’s declaration, preparation of export documents, and manufacture of customs plates if required. Viewing and test drive possible at any time, also on weekends, by appointment! Disclaimer: The buyer is responsible for independently verifying the condition, dimensions, and equipment of the goods/vehicles. All information is provided without guarantee. Subject to changes, prior sale, and errors.

Stanje: rabljeno, prevoženi kilometri: 29.002 km, moč: 74 kW (100,61 KM), prva registracija: 03/2015, vrsta goriva: dizel, lastna masa: 2 kg, največja dovoljena obremenitev: 2.400 kg, skupna masa: 5.000 kg, konfiguracija osi: 4x4, medosna razdalja: 2.500 mm, zavore: drugo, barva: zelen, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 5, število sedežev: 2, dolžina tovornega prostora: 2.100 mm, širina tovornega prostora: 1.400 mm, višina nakladalnega prostora: 300 mm, obratovalne ure: 5.802 h, Oprema: dodatne luči, filter saj, pogon na vsa štiri kolesa, računalnik na krovu, servovolan, spojka prikolice, zapora diferenciala, žerjav, * German vehicle * One owner * Condition as shown in photos * Only 29,002 km original mileage * Only 5,802 operating hours * Three-way tipper with Fassi crane mounted behind the cab * Fassi crane type F30CY023 * Lifting capacity: 995 kg at 1.85 m | 810 kg at 3.00 m | 580 kg at 4.10 m | 440 kg at 5.20 m | 335 kg at 6.30 m reach * Hook height: 9 m * 5th and 6th hydraulic control circuit * 2 hydraulic outriggers * 2 trailer couplings * Trailer load: 3,500 kg * Tipper body dimensions: Length 2,100 mm - Width 1,400 mm - Height 300 mm * Dücker UNA 200 flail mower available at extra charge * High front wall * Aluminium side panels * Height-adjustable municipal workbench with hydraulic connections * Four-wheel steering * EasyDrive (hydrostatic drive) * Power steering * 2 comfort seats * Rear window * Sliding window * Roof hatch * Differential lock * Municipal lighting and headlights * Rotating beacon lights * Wheelbase: 2,500 mm * Gross vehicle weight: 5,000 kg * Unladen weight: 2,600 kg * Payload: 2,400 kg If a new TÜV inspection is requested, we will be happy to provide an offer via our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new safety inspection (SP), and without new accident prevention inspection (UVV). Further trucks/LKWs can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the item to avoid any misunderstanding regarding its condition and suitability. Viewing and inspections are possible at any time by prior appointment and are expressly encouraged. All specifications are without guarantee. No liability is accepted for any errors or inaccuracies in this offer. The buyer is obliged to independently verify condition and equipment of the goods/vehicles. Gjdpfx Aevhqu Ascgjbl Subject to changes, prior sale, and errors.

Stanje: rabljeno, prevoženi kilometri: 33.596 km, moč: 74 kW (100,61 KM), prva registracija: 10/2011, vrsta goriva: dizel, lastna masa: 2.700 kg, največja dovoljena obremenitev: 2.300 kg, skupna masa: 5.000 kg, konfiguracija osi: 4x4, medosna razdalja: 2.500 mm, zavore: drugo, barva: zelen, voznikova kabina: drugo, vrsta prenosa: samodejen, emisijski razred: Euro 5, število sedežev: 2, dolžina tovornega prostora: 2.100 mm, širina tovornega prostora: 1.400 mm, višina nakladalnega prostora: 300 mm, obratovalne ure: 5.333 h, Oprema: dodatne luči, filter saj, pogon na vsa štiri kolesa, računalnik na krovu, servovolan, spojka prikolice, zapora diferenciala, žerjav, * German vehicle * One owner * Condition as shown in photos * Only 33,596 km original mileage Gbsdpfx Acjvhqhisgjl * Only 5,333 operating hours * Three-way tipper with Fassi crane mounted behind the cab * Fassi crane model F28B.22 * Lifting capacity: 1.85 m = 995 kg; 3.10 m = 765 kg; 4.30 m = 545 kg; 5.50 m = 395 kg * Hook height: 8 m * 5 + 6 control circuits * 2 hydraulic outriggers * 2 trailer couplings * Trailer load: 3,500 kg * Tipper body dimensions: length = 2,100 mm; width = 1,400 mm; height = 300 mm * Dücker UNA 200 flail mower available at additional cost * High front panel * Aluminum drop sides * Municipal workbench, height-adjustable with hydraulic connections * Four-wheel steering * EasyDrive (hydrostatic drive) * Power steering * 2 comfort seats * Rear window * Sliding window * Roof hatch * Differential lock * Municipal lighting and headlights * Beacon * Wheelbase: 2,500 mm * Gross vehicle weight: 5,000 kg * Unladen weight: 2,700 kg * Payload: 2,300 kg If a new TÜV inspection is required, we are happy to offer a quote through our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new SP and without new UVV inspection. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the item to avoid any misconceptions about condition or suitability for the buyer. Viewing and inspection are possible at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for mistakes or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm, up to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: Gsdpfjv Eq Evox Acgebl * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting ----General Attachments: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Fittings for retrofitting container locks in front of the headboard and rear slope for the transport of 20" containers * Bolted headboard, smooth sheet * Side walls: folding, split once in the middle, made of trapezoidal sheet metal * Steel rear wall, can be inserted between ramp holders, stored in front of the headboard when not in use * Bolted rear stakes ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing ring in each of the front and rear corners * Various holes in headboard and end beam for 1.2 t lashing options * Profifix lashing rail in longitudinal axis, central, for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm clearance) * Rear approach slope approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, headboard, tailgate, folding supports and drive-on ramps hot-dip galvanized * Axles, springs, air tank, flange towing eye and support winch painted in black * Side wall panels painted in a RAL colour of your choice (except special or metallic paints), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Available from approx. week 30 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power plug * LED lighting ----General Fittings: * Support winch at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards Gsdpfxsv D Tcbe Acgobl ----Low Loader Deck: * 50 mm softwood flooring * Preparation before the bulkhead and rear slope for retrofitting container locks for the transport of 20" containers * Bolted bulkhead made of smooth sheet steel * Side walls made of trapezoidal-profiled steel, folding design, divided centrally * Steel rear wall, can be inserted between the ramp brackets, stowed inside in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Slotted outer frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Optionally, installation of 3 t folding lashing rings every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing point * Various holes for 1.2 t lashing options in the bulkhead and rear crossmember * Profifix lashing rail along the centerline for lashing options up to LC 3000 daN ----Ramps: * One-piece mechanical grid approach ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach slope approx. 860 mm chassis height ----Wheelbase: * Wheelbase 1,140 mm ----Paintwork: * Drawbar, bulkhead, rear panel, folding supports, and approach ramps hot-dip galvanized * Axles, springs, air tank, flange drawbar eye, and support winch painted in black * Side wall paint in a RAL color of your choice (special or metallic paints not available), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified construction according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. week 30 / 2026

Stanje: novo, lastna masa: 775 kg, največja dovoljena obremenitev: 2.725 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 750 mm, prostornina tovornega prostora: 7,2 m³, barva: drugo, gradbena višina: 720 mm, delovna širina: 2.080 mm, Manufacturer: Brian James Trailers Type: Car Transport Trailer T Transporter 231-4520-35-2-12 Permissible Gross Weight: 3500 kg, Twin-Axle Payload: 2725 kg Unladen Weight: 775 kg Internal Dimensions: 4500 x 2000 mm Tyres: 195/60 R12C Loading Height: 665 mm Supplied with the following options: - hydraulically tiltable - 2 individual rear ramps, each 2.35 m long - Ramps adjustable to multiple positions - 100 km/h road approval - manual winch incl. spare wheel incl. grip deck incl. LED lighting incl. heavy-duty jockey wheel, foldable incl. coupling head with integrated lock incl. anti-slip perforated steel loading area incl. wooden floor section in the centre incl. storage box with aluminium lid As a Brian James PREMIUM PARTNER we have many models in stock. 5-year chassis warranty. Price includes vehicle registration certificate (Part II and COC papers). We hold a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary number plate. We repair trailers of all makes. Additional accessories available upon request. Technical changes, price adjustments, and errors excepted. No liability is assumed for errors or printing mistakes. Automatic reversing system, rubber torsion axle, loading ramp, tiltable platform, jockey wheel, marker lights, hot-dip galvanisation, braked, including warranty, equipment configurable as required, modifications upon request, multiple lashing options, mesh hooks on underside, V-drawbar hot-dip galvanised, 13-pin plug and reversing lights, durable, anti-slip surface, 5-year chassis warranty. Godpjyw E A Ssfx Acgjbl

Stanje: novo, lastna masa: 690 kg, največja dovoljena obremenitev: 2.310 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 1,7 m³, barva: drugo, gradbena višina: 970 mm, delovna širina: 1.890 mm, Manufacturer: Humbaur Model: Rear Tipper Tandem HUK 303117 Gsdpjx Iv I Tjfx Acgobl Permissible Gross Weight: 3,000 kg Payload: 2,310 kg Unladen Weight: 690 kg Bed Dimensions: 3,140 x 1,750 x 300 mm Tyres: 13-inch Loading Height: 670 mm Load Area Hydraulically Tiltable via Hand Pump Tipping Angle: 45°, with mesh side extension (600 mm) With AkkuFlex pump, enables tipping using a cordless drill Demonstration trailer at a special price - Chassis and tipping platform welded and hot-dip galvanized - Galvanized loading bed (3 mm) - V-groove outer frame with 4 pairs of recessed lashing rings - Sidewalls 300 mm – foldable all around - 13-pin plug and reversing lights - Drawbar latches - Tapered corner stanchions - Automatic jockey wheel - Humbaur multifunction lighting integrated into underride guard - 3-stage telescopic cylinder - Hand pump Price incl. vehicle registration document (registration certificate part II and COC papers) We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we will provide a free transit registration plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical and price changes as well as errors excepted. No liability for mistakes or printing errors. Features: - Automatic reverse mechanism - Rubber suspension axle - Independent wheel suspension - Tiltable load area - Automatic jockey wheel - Marker lights - Galvanized loading bed (3 mm) - Braked - Includes warranty - Chassis and tipping platform welded and hot-dip galvanized - V-groove outer frame with 4 pairs of recessed lashing rings - Sidewalls 300 mm – foldable all around - 13-pin plug and reversing lights - Drawbar latches - Tapered corner stanchions - Humbaur multifunction lighting integrated into underrun protection - 3-stage telescopic cylinder - Hand pump

Stanje: novo, lastna masa: 1.040 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: srebrn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3,500 kg Payload: 2,460 kg Unladen Weight: 1,040 kg Bed Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading Platform Hydraulically Tippable with Hand Pump and Electric Pump Tip Angle: Rear 42°, Side 50° - V-drawbar hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized - Tipping bridge made from a single piece of steel - 4-stage hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - 350 mm high side walls made of aluminium, completely removable - Rear flap can be used as a swing tailgate - 6 lashing rings mounted on the bridge floor, each with an 800 kg tie-down capacity, DEKRA-certified - Jockey wheel - Plank compartment prepared for easy retrofit of aluminium ramps - Silver side panels - Parabolic suspension Price includes vehicle registration certificate (Part II and COC documents) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. Upon request, we can provide a free temporary license plate for transfer. We repair trailers of all makes. Additional accessories available upon request. Subject to technical changes, price adjustments, and errors. No liability for mistakes or printing errors. Gbsdpfx Ajwlabxecgol Features: Automatic reversing system, rubber suspension axle, independent wheel suspension, tilting loading area, jockey wheel, marker lights, hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from a single piece of steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminium side walls, completely removable, rear flap can be used as a swing tailgate, 6 lashing rings on the bridge floor (800 kg capacity per ring, DEKRA-certified), plank compartment prepared for easy retrofit of aluminium ramps, silver side panels, parabolic suspension.

Stanje: novo, lastna masa: 1.040 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: črn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Black Edition Gross Vehicle Weight: 3,500 kg Payload: 2,460 kg Unladen Weight: 1,040 kg Internal Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading platform hydraulically tiltable with hand pump and electric pump Tip angle: rear 42°, side 50° - V-drawbar, hot-dip galvanized - Chassis and tipper bed, hot-dip galvanized - Tipper bed made of one-piece steel - 4-stage, hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - Side panels made of aluminium, 350 mm high, fully removable - Rear tailgate with pendulum function - 6 lashing rings mounted on the bed floor, each with a lashing force of 800 kg, Dekra-certified - Support wheel - Plank compartment prepared for easy retrofit of aluminium ramps - Black side panels - Parabolic suspension Price includes registration certificate (part II) and COC documentation We have a large range of trailers by the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Gbedsvtf Nfopfx Acgol On request, we provide a free temporary registration plate for carriage. We service and repair trailers of all manufacturers. Additional accessories on request. Technical changes, price changes, and errors excepted. No liability for errors or misprints. Reversing automatic, rubber suspension axle, independent suspension, tiltable platform, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipper bed made of one-piece steel, 4-stage hard-chromed tipping cylinder, electric and hand pump, 13-pin plug and reversing lights, 350 mm high aluminium removable side panels, pendulum-type rear tailgate, 6 lashing rings (800 kg each, Dekra-certified), preparation for aluminium ramps, black side panels, parabolic suspension.

Stanje: novo, lastna masa: 400 kg, skupna masa: 750 kg, dolžina tovornega prostora: 2.450 mm, širina tovornega prostora: 1.300 mm, višina nakladalnega prostora: 1.400 mm, Bei ANHÄNGERWIRTZ sofort viele Modelle online verfügbar Bequem und rund um die Uhr Online kaufen auf Selbst abholen oder liefern lassen. Der online Abholmarkt für Ihren neuen Anhänger bietet starke Markenfabrikate! über 850 Neuanhänger auf Lager über 130 gebrauchte Anhänger ständig im Angebot. unverbindliches Beispiel: Neufahrzeug Topseller KARGO DECKEL TFDL 250.00 U 245X130X140CM HECKTÜREN STÜTZEN (S) 100KM/H 750KG Gbedpsy A S Tnefx Acgsl Deckelanhänger Kargo TFDL 250.00 245x130x140cm 750kg Tieflader Einachser mit V-Deichsel, ungebremst Gummifederachse mit Radstoßdämpfern 100 km/H geeignet, robuster geschlossener Plywoodaufbau weiß, Polydeckel, Hecktüren abschließbar, 6 Zurrmulden im Ladeboden, Zurrschiene Innenwand, Stützrad, Heckstützen..... Verkauf telefonische Bestellannahme zu folgenden Zeiten Mo. - Fr. 08.00 bis 12.30 Uhr und 14.00 bis 18.00 Uhr oder rund um die Uhr über unseren Onlineshop auf Urheberrecht - Markenschutz 04.26 TPPTFDL250.00750

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down side walls made of trapezoidal profiled steel sheets, with drop-side lift assist * Steel rear wall, can be slid in between ramps – storage bracket in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm Gsdsxglibopfx Acgsbl * Option to install 3 t folding lashing rings every 600 mm * In each corner, front and rear: 1 x 6.3 t lashing ring * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Information: * Reinforced and certified superstructure according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 08/2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * 40 mm flange drawbar eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Fold-down side walls made of trapezoidal profiled steel sheets, with drop-side lift assist * Steel rear wall, can be slid in between ramps – storage bracket in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each corner, front and rear: 1 x 6.3 t lashing ring * Various holes in the front and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for single-operator use, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, bulkhead, ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Information: * Reinforced and certified superstructure according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 08/2026 Gbjdpfxjxglh Re Acgol

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 93 kW (126,44 KM), vrsta prenosa: hidrostat, vrsta goriva: dizel, skupna masa: 17.730 kg, lastna masa: 14.500 kg, Leto izdelave: 2019, obratovalne ure: 3.474 h, Oprema: UVV varnostni pregled, dodatne luči, hidravlika, hidravlika prijemala, hidravlično kladivo, kabina, klimatska naprava, nastavljiva roka, pogon na vsa štiri kolesa, računalnik na krovu, Operating weight approx. 16,500 kg TAB adjustable boom, 4 hose rupture protection valves and overload warning device 2.50 m dipper stick Dozer blade on rear axle Control circuit for hydraulic quick coupler including piping on dipper stick Gjdpfxjxugvxj Acgebl 8-piece tires - 10.00-20 off-road tread Full auxiliary piping for hammer, shear, and tilt bucket operation Additional control circuit for hydraulic quick coupler Radio pre-installation with radio Air-suspended and electrically heated comfort seat Rain protection roof 2 additional work lights on cab Grab transport bracket Second storage box on undercarriage Air conditioning system Radio with USB connection / 2 x 12-volt sockets Amber rotating beacon with cab-mounted switch Bucket linkage with 5-ton load hook ATS – advanced tool select automatic tool selection Activated carbon filter for cab fresh air Footrests LED work and auxiliary lights Cover for rear dozer blade cylinder ZF axles BEKAMAX central lubrication system Hydraulic quick coupler HS10 Attachments available at extra cost Very well maintained and fully operational machine from first owner

Stanje: novo, prevoženi kilometri: 500 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 3.800 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2024, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Chassis – New Vehicle: – MODEL 2024 - Manufacturer/Type: Volvo FH500 6x2, Wheelbase 3700 mm, VIN: To be provided. - For detailed vehicle equipment, please refer to the attached documents. Gbodpfx Aey Hm E Hjcgel - Oil pump type: LEDUC - Fifth wheel with sliding function and self-lubricating (type Jost JSK), mounted on the subframe - Front support cover with company logo (engraved/smooth steel sheet) Body: Crane interchange system: The superstructure, including the crane, can be dismounted, and a fifth wheel can instead be installed on the chassis. The crane and body can also be used together with the fifth wheel mounted. The vehicle is equipped with two fifth wheels, each longitudinally adjustable. - Mounting/bolting of crane and main outrigger carrier to the subframe. Installation of all hydraulic and electrical connections. Installation position: front - Drop-side body version as steel/welded construction, removable - Approx. length 380 cm, width 248 cm. - Body painted in chassis color (RAL code) - Removable aluminum side boards, Suer brand, 600 mm height, anodized with integrated steps, removable Kinngripp stakes. - Standard platform floor with welded 4 mm steel chequer plate, painted in chassis color (RAL) - 6 retractable lashing rings per side (2,500 daN per ring), in slot pattern profile, flexibly arranged. - 4 x tie-down points for chains (6,500 daN) (2 front, 2 rear on the body) - Heavy-duty front wall with welded frame, welded 4 mm steel sheet, 5 accessory hooks, approx. 1300 mm height, painted steel, with 2 welded folding lashing points for tie-down straps. - Cladding panels and fenders made from aluminum chequer plate (sandblasted, powder-coated, painted) - Multifix stake pockets, 2 rows at approx. 80 cm intervals from the front and rear wall. - Brackets (for support plates, crane pads) made of galvanized steel. - Additional supports mounted underneath the chassis. - Rear underrun guard and extra support installation with hydraulic and electrical connections. - Duomatic and red/yellow connections at the front for semi-trailer and also at the rear for trailer connections - New crane, type FASSI F545 RA 2.27, endless rotation, fully installed, commissioned, and parameterized, 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions. - For detailed crane equipment, please refer to the attached documents. - Series 5450 - Initial TÜV-UVV approval and parameterization of the crane in accordance with technical regulations and load charts from FASSI crane manufacturer. Additional equipment and crane accessories: - 5 crane support pads with brackets, arranged as per manufacturing drawings. - AWC (automatic wire rope length monitoring) - Operating manual, maintenance manual, and crane inspection log Lighting: - 2 LED AS integrated in the front wall - 2 rotating beacons on FH roof - 2 strobe lights in the engine hood - 2 LEDs under the body at the rear (left/right), arrangement as agreed - 4 LED AS, 2 left and 2 right, mounted under the body in the support leg area - 4 yellow LED light strips, 1 on each support leg Further information available on request.

Stanje: novo, prevoženi kilometri: 500 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 3.800 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2024, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Chassis – New Vehicle: – MODEL 2024 - Manufacturer/Type: Volvo FH500 6x2, Wheelbase 3700 mm, VIN: To be provided. - For detailed vehicle equipment, please refer to the attached documents. - Oil pump type: LEDUC - Fifth wheel with sliding function and self-lubricating (type Jost JSK), mounted on the subframe - Front support cover with company logo (engraved/smooth steel sheet) Body: Crane interchange system: The superstructure, including the crane, can be dismounted, and a fifth wheel can instead be installed on the chassis. The crane and body can also be used together with the fifth wheel mounted. The vehicle is equipped with two fifth wheels, each longitudinally adjustable. - Mounting/bolting of crane and main outrigger carrier to the subframe. Installation of all hydraulic and electrical connections. Installation position: front - Drop-side body version as steel/welded construction, removable - Approx. length 380 cm, width 248 cm. Gjdpfxsy Hm Etj Acgjbl - Body painted in chassis color (RAL code) - Removable aluminum side boards, Suer brand, 600 mm height, anodized with integrated steps, removable Kinngripp stakes. - Standard platform floor with welded 4 mm steel chequer plate, painted in chassis color (RAL) - 6 retractable lashing rings per side (2,500 daN per ring), in slot pattern profile, flexibly arranged. - 4 x tie-down points for chains (6,500 daN) (2 front, 2 rear on the body) - Heavy-duty front wall with welded frame, welded 4 mm steel sheet, 5 accessory hooks, approx. 1300 mm height, painted steel, with 2 welded folding lashing points for tie-down straps. - Cladding panels and fenders made from aluminum chequer plate (sandblasted, powder-coated, painted) - Multifix stake pockets, 2 rows at approx. 80 cm intervals from the front and rear wall. - Brackets (for support plates, crane pads) made of galvanized steel. - Additional supports mounted underneath the chassis. - Rear underrun guard and extra support installation with hydraulic and electrical connections. - Duomatic and red/yellow connections at the front for semi-trailer and also at the rear for trailer connections - New crane, type FASSI F545 RA 2.27, endless rotation, fully installed, commissioned, and parameterized, 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions. - For detailed crane equipment, please refer to the attached documents. - Series 5450 - Initial TÜV-UVV approval and parameterization of the crane in accordance with technical regulations and load charts from FASSI crane manufacturer. Additional equipment and crane accessories: - 5 crane support pads with brackets, arranged as per manufacturing drawings. - AWC (automatic wire rope length monitoring) - Operating manual, maintenance manual, and crane inspection log Lighting: - 2 LED AS integrated in the front wall - 2 rotating beacons on FH roof - 2 strobe lights in the engine hood - 2 LEDs under the body at the rear (left/right), arrangement as agreed - 4 LED AS, 2 left and 2 right, mounted under the body in the support leg area - 4 yellow LED light strips, 1 on each support leg Further information available on request.

Stanje: novo, prevoženi kilometri: 500 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 3.800 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2024, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Chassis – New Vehicle: – MODEL 2024 - Manufacturer/Type: Volvo FH500 6x2, Wheelbase 3700 mm, VIN: To be provided. - For detailed vehicle equipment, please refer to the attached documents. - Oil pump type: LEDUC - Fifth wheel with sliding function and self-lubricating (type Jost JSK), mounted on the subframe - Front support cover with company logo (engraved/smooth steel sheet) Body: Crane interchange system: The superstructure, including the crane, can be dismounted, and a fifth wheel can instead be installed on the chassis. The crane and body can also be used together with the fifth wheel mounted. The vehicle is equipped with two fifth wheels, each longitudinally adjustable. - Mounting/bolting of crane and main outrigger carrier to the subframe. Installation of all hydraulic and electrical connections. Installation position: front - Drop-side body version as steel/welded construction, removable - Approx. length 380 cm, width 248 cm. - Body painted in chassis color (RAL code) - Removable aluminum side boards, Suer brand, 600 mm height, anodized with integrated steps, removable Kinngripp stakes. - Standard platform floor with welded 4 mm steel chequer plate, painted in chassis color (RAL) - 6 retractable lashing rings per side (2,500 daN per ring), in slot pattern profile, flexibly arranged. - 4 x tie-down points for chains (6,500 daN) (2 front, 2 rear on the body) - Heavy-duty front wall with welded frame, welded 4 mm steel sheet, 5 accessory hooks, approx. 1300 mm height, painted steel, with 2 welded folding lashing points for tie-down straps. - Cladding panels and fenders made from aluminum chequer plate (sandblasted, powder-coated, painted) - Multifix stake pockets, 2 rows at approx. 80 cm intervals from the front and rear wall. Gbjdpsy Hm Eyofx Acgel - Brackets (for support plates, crane pads) made of galvanized steel. - Additional supports mounted underneath the chassis. - Rear underrun guard and extra support installation with hydraulic and electrical connections. - Duomatic and red/yellow connections at the front for semi-trailer and also at the rear for trailer connections - New crane, type FASSI F545 RA 2.27, endless rotation, fully installed, commissioned, and parameterized, 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions. - For detailed crane equipment, please refer to the attached documents. - Series 5450 - Initial TÜV-UVV approval and parameterization of the crane in accordance with technical regulations and load charts from FASSI crane manufacturer. Additional equipment and crane accessories: - 5 crane support pads with brackets, arranged as per manufacturing drawings. - AWC (automatic wire rope length monitoring) - Operating manual, maintenance manual, and crane inspection log Lighting: - 2 LED AS integrated in the front wall - 2 rotating beacons on FH roof - 2 strobe lights in the engine hood - 2 LEDs under the body at the rear (left/right), arrangement as agreed - 4 LED AS, 2 left and 2 right, mounted under the body in the support leg area - 4 yellow LED light strips, 1 on each support leg Further information available on request.

Stanje: rabljeno, prevoženi kilometri: 273.439 km, moč: 118 kW (160,44 KM), prva registracija: 07/1995, skupna masa: 7.490 kg, vrsta prenosa: mehanski, skupna dolžina: 7.700 mm, skupna širina: 2.400 mm, skupna višina: 4.000 mm, Vozilo pelje, zavira, prestavlja – motor deluje brezhibno Dvižna ploščad ne deluje Za mojstre brez tehničnega pregleda (zadnji 10/25) Gsdpfey Eu Nkox Acgobl Odjava 03/26