Müller-Mitteltal Tandem-Tieflader Anhänger Ets-Ta-B 11,9 nakup rabljenega (36.691)

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm ride height via actuating cylinder * Start-assist for maneuvering and forced lowering onto the first axle, controlled via speed-dependent EBS-E electronics (no installation required on the truck side, additionally with cable for control from the tractor) ----Air Suspension: Dedeyfy Rrspfx Acfouu * Air suspension with lowering function via remote control ----Drawbar / Flange Eye: * 50 mm flange bolt towing eye - height adjustable by +77 mm and -33 mm - for 2 t support load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, controlled via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connector cables for agricultural and forestry vehicles * Radio remote power supply 12+24V via tail lamp ----General Attachments: * BPW landing gear at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims * Removable pin-type towing coupling (use permitted only when underrun protection is retracted) * Closed plastic half-shell single mudguards * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, located on the right side * Closed side underrun protection usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine side, from truck/tractor), designed for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right front) with operation via radio remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift unit (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift control via radio remote control * Radio control with fast-lowering only during unloading, not during lifting * Emergency stop switches on both left and right sides * Container bearing with 4 supports on each side and 1 roller each at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main boom lifting * 2 x mechanical drop-down supports at the rear * Certified for 20 t gross weight (2 x 9 t axles) and 2 t nose weight * Note: If the radio control is outside the charging cradle, the service brake must be applied in order to enable the remote operation. Brake couplings must always be connected to allow the hydraulic/pneumatic valves to open * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Finish: * Chassis, drawbar, access step, underrun protection, and drop-down supports hot-dip galvanized * Axles, air reservoir, and landing gear at the front painted black * Palfinger hooklift painted in black/yellow ----Information: * Errors and prior sale excepted * Vehicle is in very good / as-new condition ----Container Dimensions: * Load compartment length: 5,500 mm * Load compartment width: 2,300 mm * Load compartment height: 1,000 mm Information: * Mounting fittings for hook systems available

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-tonne Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering device ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck display via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing spotlights (switched via reverse gear) * LED lighting Duedpfjx Nli Nsx Acfeu ----General fittings: * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame bent at 45°, hole pattern for lashing equipment, lashing force per lashing point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg drop lashing brackets at approx. 600 mm spacing possible – each side is equipped with 12 pcs. 3,000 kg lashing brackets included in delivery * Each side has 5 pockets for 100 x 50 mm stake posts in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum supports: * 3 pcs. galvanised drum supports secured by container locks with side forklift pockets center/center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross-bracing * Permissible drum weight per cable support 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing drum shaft * Steel drum shaft 76 mm diameter, with centring and rotating ends * 2 locating rings * 2 centring cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for securing the drum against rotation and uncoiling by the customer ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 tonnes GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from week 51/2026

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: Dodpeylfvmjfx Acfeuu * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2-in-1: Suitable for swap containers (Abrollbehälter) and as low-loader trailer ----Braking System: * EBS electronic braking system * Emergency release facility for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lift and lower system and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * Tire pressure monitoring system, display option in truck via EBS signal (no truck-side installation required) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Tool box, powder-coated steel, approx. 1,000 x 300 x 600 mm * Storage box for container net, galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic buffer bumper * Foldable 'A' sign at the rear ----Loading Platform: * Main frame with raised outer frame to guide swap containers * Steel sheet floor with recesses for rollers in the bogie area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point clamping lock and mechanical plug-in stops in the running channel at the front, securing certificate according to DIN 30722-1 * Weld bead as anti-slip covering in the inclined running area * Mechanical drop-down supports at the rear ----Load Securing: * 1 pair 10 t UVV lashing rings at the front wall carrier * 3 pairs 10 t UVV lashing rings on each side of the outer frame * Each side with 4 x 2 t cloverleaf lashing eyes * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Paintwork: * Chassis, bogie, locking elements, rear drop-supports hot-dip galvanized * Drawbar, axles, and air tanks painted in a black shade ----Additional Info: * New vehicle, no initial registration, full manufacturer warranty * Subject to errors and prior sale * Sample images Dusdpel Tq Nmsfx Acfou ----Delivery Time: * Available approx. from KW 43 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 18.0: * 3-in-1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm drawbar eye with height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS, display option in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Toolbox made of powder-coated steel sheet, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box made of galvanized sheet metal for container nets, approx. 960 x 300 x 400/450 mm, right side * Plastic bumper buffer at rear * Mechanical drop-down supports at rear ----Load Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with roller recesses in the bogie area * Possible to transport roll-off containers with a length of 5,500–7,000 mm * Pneumatic four-point clamp locking as well as mechanical locking angles at the front in the track, securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. volume of 10 m³ possible * Includes 8 removable tub stops for lateral centering of the tubs; front 4 stops plugged in with pivotable stop * Weld bead as anti-slip coating in the ramp area of the run-up incline ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements to securely fix the tubs * 4 lashing bars per side, cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: Dodpfxol Thv Ro Acfjuu * 1 pair of aluminium drive-on ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-wheeled and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight up to 20,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. calendar week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment device ----Electrical / Lighting: * LED tail lights * 15-pin power connector * TPMS, display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet, approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear collision protection buffers * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, possible container length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking as well as mechanically insertable stop angles at the front in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 removable skip stops for lateral centering of the skips, front 4 skip stops inserted with pendulum mount Dedol Thwcopfx Acfsuu * Weld bead as anti-slip coating in the ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips * 4 lashing bars each, cloverleaf design (side) * 1 pair of 13.4 t UVV lashing rings to the front ----Ramps: * 1 pair of aluminum access ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight of 20,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. CW 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area Dedpfxexptn Do Acfouu ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: Available immediately*

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E electronic braking system * Emergency release device for spring-actuated cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x 9 t SAF axles * 1st axle as a lift axle (fully automatic) * Lift axle with +30 mm ride height via actuating cylinder * Start assist function for maneuvering and forced lowering on the first axle - controlled via speed-dependent EBS electronics (no truck-side installation required, additionally equipped with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Eye: * 50 mm flanged drawbar eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights operated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connection cables for agricultural and forestry vehicles * Wireless power supply 12+24 V via tail light ----General Add-on Parts: * BPW support winch at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminum rims * Pin-type towing coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell individual mudguards * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 matte stainless steel toolboxes approx. 650 x 350 x 320 mm mounted on the right side * Enclosed side impact protection can be used as advertising space ----Hydraulics: * Dual-circuit hydraulic connections (engine side from truck / tractor) rated for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted on the right in the front area), operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift unit (Serial No. 100746129, year 2023) * Main frame made of high-strength fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift operation via remote control * Remote control with fast function when lowering, but not when raising * Emergency stop switch on both left and right sides * Container support with 4 supports each side and 1 roller each rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to support lifting of the main arm * 2 x mechanical fall supports at the rear * Approval for 20 t total weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is removed from the docking station, the service brake must be engaged to activate the radio control. Brake connections must remain permanently connected to operate the hydraulic/pneumatic valves * Monitoring system for underrun protection to ensure it is retracted when tipping Duodpfx Aex Dp Amocfsu ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, step, underrun protection, and fall supports hot-dip galvanized * Axles, air tanks, and front support winch painted black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale excepted * Vehicle is in very good / as-new condition ----Container Dimensions: * Load length: 5,500 mm * Load width: 2,300 mm * Load height: 1,000 mm Info: * Mounting brackets for hook systems according to ...

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: Dusdpjl Tihujfx Acfju ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary) * LED lighting system 12/24 V * Removable rear LED beacon ----General Accessories: * Mechanical warning plate kit for 3 m total width * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left * Front axle with plastic mudguards, rear with galvanized steel mudguard skirts ----Low Loader Platform: * Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers * Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform * Bamboo wood between the longitudinal beams in front of the excavator arm rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at front corners * 2 x 13.4 t UVV lashing points each at side front and rear corners * 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions) * 4 stake pockets per side with additional 2 t lashing capability each * 1 x 16 t UVV lashing ring on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side) ----Excavator Arm Rest: * Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines ----Paintwork: * Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel Djdpoxf Skpjfx Acfjuu ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2 in 1 = for roll-off containers and as low-bed trailer ----Braking system: * EBS electronic braking system * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 ton axles ----Suspension: * Air suspension with lift and lowering system, including RTR valve ----Drawbar: Duedpfxjl Tpc Aj Acfou * Drawbar, 2,000 mm long with 40 mm towing eye and height adjustment ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V * 15-pin power connector ----General attachments: * Tool box made from powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made from galvanized sheet, 960 x 300 x 450/400 mm * Reflective contour marking tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumper buffers * Foldable rear A-board ----Loading area: * Main frame with raised outer rails to guide the roll-off containers * Steel floor plate with roller recesses in the bogie area * Container length of 5,500 - 7,000 mm possible * Pneumatic 4-way clamp lock, as well as mechanical plug-in stop angles at the front of the guide track, load securing certificate according to DIN 30722-1 * Weld bead as anti-slip coating in the ramp area * Mechanical drop-down supports at the rear ----Load securing: * 1 pair of 10 ton UVV lashing rings at the front on the bulkhead carrier * 3 pairs of 10 ton UVV lashing rings on the outer frame (side) * 4 pairs of 2 ton side lashing eyes with cloverleaf design on each side * 4 x 8 ton recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminum access ramps (10.6 tons/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Chassis, bogie, locking parts, rear drop-down supports hot-dip galvanized * Drawbar, axles, air tanks painted in black ----Information: * New vehicle without first registration, with full manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. week 43 / 2026

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release for spring-actuated cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lowering function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and continuously adjustable height ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck dashboard via EBS signal – no installation required on truck * SmartBoard as infotool with pressure sensors for axle load display per axle group * 15-pin power connector * LED taillights * Removable LED beacon at rear ----General attachments: * Warning plates front & rear * 2 x toolboxes made of galvanized, powder-coated sheet steel approx. 650 x 300 x 600 mm, right side * Closed single plastic mudguards at front * Straight steel spray suppression panels at rear, each with spray suppression * Side underrun protection ----Low-bed platform: * Turntable/platform extension by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and lockable * Flooring on turntable platform made of 50 mm softwood; on low-bed platform made of 60 mm softwood * 20 mm rubber covering instead of timber in drive lane area with a well length of 6,780 mm including sloped ramp * Rubber coating on the ramp left and right, approx. 860 mm length * 4 stake pockets per side (stakes not included) with simultaneous 2 t lashing point capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load securing (Lasi package): Turntable/platform: * 2 pairs of 13.4 t lashing eyes in outer frame of turntable/platform Low-bed: * 4 pairs of 10 t lashing rings per side on the outer frame, foldable and loadable in all directions * 2 pairs of 13.4 t swiveling lashing rings at rear on each side ----Ramps: * Rubber covering on foldable access ramps * Hydraulic folding ramps with hydraulic tip extension approx. 4,650 x 720 mm * Hydraulically lateral ramp shift & load-holding valves ----Rear support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stowed on left side compartment ----Excavator boom trough: Dedpfoylfvgex Acfeuu * Excavator boom trough above rear axle to end of slope approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings at sides in excavator trough ----Hydraulics: * Hydraulic flow divider in trailer (for truck hydraulic pump outlet above 40 up to max. 120 ltr./min.) ----Loading dimensions: * Rear loading platform: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Platform above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape at sides and rear * Chassis, turntable, access ramps and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black tone ----Info: * New vehicle with manufacturer warranty * Errors and prior sale reserved * Sample images may show special equipment ----Lead time: * Vehicle available from approx. week 23/2026

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf Dujdpsrwc R Ajfx Acfsu

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles Dujdpfx Aexf Skvocfeu ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Fittings: * Aluminum air reservoir * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included * 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included) * 30 mm phenolic plywood floor ----Drum Supports: Duodpfxox Nlkas Acfju * 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with transverse brace * Maximum drum weight per support 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling ----Loading height: * Approx. 1,040 mm when loaded ----Coating: * Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized * Axles painted in a black shade

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, TRA-Kombi 18.0: * 3-in-1 solution: suitable for roll-off containers, skip containers, and as a low-loader ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: Djdjwb Rakjpfx Acfouu * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrical / Lighting: * Tire pressure monitoring system (TPMS), display capability in truck via EBS signal (no truck-side installation required) * LED rear lights 12/24 V * 15-pin power connector ----General Attachments: * Tool box made of powder-coated sheet steel * Spare wheel carrier (basket type) on the right side * Closed side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffers * Foldable A-sign at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel deck with recessed rollers in the bogie area * Can transport roll-off containers with a container length of 5,500 – 7,000 mm * Pneumatic 4-point clamp locking and mechanical plug-in stop angles at the front of the guide track * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * Includes 8 repositionable bin stops for lateral centering of the skips, front 4 stops plug-in with pivoting stop * Weld bead as anti-slip coating in the ramp area of the track * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for securing with tensioning elements, 4 cloverleaf-type lashing brackets per side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t recessed lashing eyes per side in the outer frame ----Ramps: * Aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Additional Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egstorf

Stanje: novo, največja dovoljena obremenitev: 13.410 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, prostornina tovornega prostora: 11 m³, Leto izdelave: 2026, * KA-TA-R 18.0 ML Dsdpfxsxl Nkge Acfeuu * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck dashboard via EBS signal (installation on the truck side not required) * 2 x 9 t Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm using offset plate) * Jost landing gears at the front * Folding galvanized steel underrun protection for paver loading * Closed plastic single mudguards * Standing platform on the front wall * Manual sliding tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grained steel * Steel three-way tipper body (side walls with MM profile - continuous without side posts - swinging with manual central locking and drop-down left side wall with board spring lifter) * Tarpaulin similar to RAL 7038 agate grey with side tension by ratchet straps and elastic cords at the front and rear * Front wall platform made of grating with step at drawbar and hand grip on the front wall * Rear wall – made of HBW 400 steel – swinging with automatic 2-claw lock * 5 mm steel floor made of HBW 450 steel * 4 x 3 t recessed and foldable lashing rings per side – integrated into steel floor * Reinforced and certified body according to EN 12642 XL including load securing certificate up to 19 t * Side wall paintwork in your desired RAL color (no special or metallic paintwork) – changeable up to approx. 6 weeks before completion * Axles, air tanks, landing gears, flange towing eye painted in black tone * Chassis, underrun guard and drawbar hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale reserved * Available from approx. week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar, 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring system with display capability in the truck dashboard via EBS signal - without truck-side installation - * 15-pin power connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting Dsdex Nlkgopfx Acfjuu ----General Fittings: * Aluminium air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun guard ----Platform Bed: * Zurr-fix outer frame, 45° edged with hole pattern for lashing equipment, lashing force per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – as standard, each side fitted with 12 x 3,000 kg lashing rings * Each side with 5 sockets for stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanised drum supports secured via container locks, with lateral forklift pockets, centre-to-centre 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clearance between support arms approx. 1,775 mm, with crossbeam * Maximum drum weight per cable drum support: 6,000 kg * Without drive and without drum brake * Support arm with locking device for securing drum shaft * 76 mm diameter steel drum shaft with centring and rotatable ends * 2 set collars * 2 centring cones made of polyamide * 4 x 3.2 t lashing eyes on support arms for customer-side securing of drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm loaded ----Coating: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. CW 51 / 2026

Stanje: novo, Leto izdelave: 2026, New model, now with 9,900 kg gross weight! Cable drum transport trailer. Permissible total weight 9,900 kg, payload approx. 7,000 kg (standard equipment). Hydraulic lifting and lowering of the cable drum from the towing vehicle or via separate engine (4-stroke petrol; 8.1 kW; electric start) with weather protection cover. Hydraulic drum drive with rubber-coated drive rollers. Drum diameter 800–3,000 mm, drum width up to approx. 1,650 mm, centering cones for cable drums. Two-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tires 315-80R22.5, tire pressure monitoring. 40 mm adjustable towing eye, dual-line air brakes, LED lighting 12+24 V. Toolbox, advertising panels in the side underride protection. Fully hot-dip galvanized chassis. New vehicle including factory warranty. Available from approx. calendar week 26-2026. (Archive photos) Duodpfjyyhb Nox Acfsu = Further Information = Unladen weight: 2,900 kg Payload: 7,000 kg gross weight: 9,900 kg Front tires: 315-80R22.5 Country of manufacture: DE Please contact Jan-Marc Schwickert for more information.

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform Trailer Available in week 37/2026, Inquiry No.: 31941 Delivery to your address possible * We are happy to provide you with an individual offer * ---- * GVW: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized 400mm front wall * Hardwood excavator bucket rest screwed to the front wall * Unloaded deck height: 930 mm / loaded: 870 mm * One-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured by retaining rods and inclined supports * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) Dedpfx Acezbfmqefsuu * Perforated outer frame (45° angled, perforated for lashing devices, lashing capacity per point LC 2000 daN with minimum spacing of 480 mm. Installation of drop lashing rings LC 3000 daN with approx. 600 mm spacing possible) with tight cross bracing, high-web front and rear end sections and access ramp at the rear, hot-dip galvanized * 10 recessed UVV lashing rings LC 3000 daN in the existing hole matrix in the outer frame, additionally * Further lashing options via drill holes (Ø 50 mm, LC 1200 daN) in the front and end beams * Toolbox in front of the front wall * Side marker lights with indicator activation * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * Height-adjustable support winch at the front, foldable supports at the rear * 2 container locks recessed in the front crossmember * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable, 50 mm eye available upon request * 1 LED marker light removable at the rear ---- * Leasing, hire purchase, financing, trade-in possible * e.g. 525 Euro per month over 60 months with no down payment or final residual value ---- * Our business hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside of business hours available by appointment We speak German, English, Polish, French Leasing, financing, trade-in available

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2020, naslednji pregled (TÜV): 02/2027, dolžina tovornega prostora: 9.800 mm, širina tovornega prostora: 2.520 mm, Oprema: ABS, * ABS * Zadnje podpore * BPW ECO-Plus osi * Oranžna opozorilna luč * Aluminijasta platišča * Duomatik zračni priključek ----Nadgradnja: Pocinčan nizkopodestni priklopnik (2500+7300 mm)/Višina nakladanja cca 900 mm, zadaj znižan/Naklonska višina cca 770 mm, jeklen/lesen pod in protidrsna prevleka, razširljiv na 3 m, hidravlične nakladalne rampe (zložljive za nizek nakladalni kot) s protidrsno prevleko, tudi hidravlično bočno pomične, pričvrstitveni obroči Duodpsy T Dh Ssfx Acfsu Prodaja le pravnim osebam. PRI IZVOZU JE TREBA PLAČATI SAMO NETO CENO!!!! VSE INFORMACIJE SO BREZ JAMSTVA, VKLJUČNO Z OPREMO IN DODATKI. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji (glejte impressum).

Stanje: novo, največja dovoljena obremenitev: 11.050 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-loader Three-way Tipper Trailer with Ramps * NEW VEHICLE Duedoyvxg Iepfx Acfsu * Now immediately available in RAL 9016 Traffic White * Leasing, financing, and trade-in of your old trailer possible * Reference number for inquiries: 11654 * Remote diagnostic unit with display option in the truck via EBS signal * Side marker lights with indicator function * GVW: 14,400 kg, Payload: 11,050 kg * EBS 2S/2M * Galvanized floor, 5m x 2.42m x 0.5m, laser-welded drop sides, swinging, foldable, and removable, prepared for later retrofit of side extension panels * Lockable compartment under the tipping bridge for approach ramps * Incl. 1 pair of aluminium loading ramps, 8t per pair, 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lash rings LC 5000daN at front and rear + 8 lashing eyes LC 3000daN recessed and foldable in the tipper floor (centrally positioned) * Excavator bucket rest made of hardwood * 2-step access in front of front wall (hot-dip galvanized) * Drawbar infinitely height-adjustable, hot-dip galvanized, towing eye 40mm * Wide tires 385/55R 19.5 (4 units), parabolic springs * Net hooks, rear stanchions bolted, hot-dip galvanized * Cables for the rear drop side * Plastic toolbox on the right side of the chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer * Hire purchase price: * e.g. €560 for 60 months with no down payment and no residual value. Offer from our financing partner "FM LeasingPartner." Other terms with/without residual value or down payment possible * Request your personal quote! * We are official Müller-Mitteltal sales partners * Delivery free to your site available with timely order! ----Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 We are also available by appointment outside of these hours We speak German, English, Polish, and French. WhatsApp

Stanje: rabljeno, največja dovoljena obremenitev: 16.950 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2006, naslednji pregled (TÜV): 04/2026, Leto izdelave: 2006, * Müller Mitteltal T3 NG * Low-loader * Ramps * Twin tires * Permissible total weight: 24,000 kg * Unladen weight: 7,050 kg * Payload: 16,950 kg * Tyres: see pictures * BPW axles * Immediately available * Subject to prior sale and errors excepted Do you have any questions? Contact us for prompt advice – also available directly via WhatsApp: We offer: Dusdpfx Acjyv Ug Defou Net purchase for companies within the EU with VAT ID number as well as for customers from non-EU countries. Leasing and financing options. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to the port. All prices listed on classified ad platforms are gross prices and already include the statutory VAT of 19%.

Stanje: rabljeno, največja dovoljena obremenitev: 31.820 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1980, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, skupna višina: 900 mm, Leto izdelave: 1980, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal T4 Low Loader Trailer * SAF axles with drum brakes * Twin tyres * Low bed with extendable loading platform Duedpfx Ajy Skl Iecfou * Hydraulic loading ramps, movable (2 units) * Drive-over gooseneck * Additional rear supports * Turntable construction ----Dimensions & loading area * Loading area approx. 9,800 mm * Loading width: 2,550 - 3,000 mm * Loading height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tyres: 235/75R17.5 ----Vehicle number: 11892----Subject to errors and prior sale----Advertising and various lettering have been digitally removed. -----We are happy to assist you with any formalities arising from the purchase of a vehicle. Simply let us know your requirements and suggestions, and we will take care of the rest. Among other things, we can offer you the following services at an additional cost: ----Trade-in of your old vehicle TÜV/general inspection Complete export processing Financing brokerage Obtaining export license plates Vehicle transport Vehicle registration Recovery and vehicle transport ----Your VTS Team

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, TRA-Kombi 18.0: 3-in-1: Suitable for hooklift containers, skip containers, and as a low loader ----Brakes: * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 tonne axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), display on truck via EBS signal (no truck-side installation required) * LED rear lights 12/24V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated sheet steel * Spare wheel carrier basket, right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Folding A-board at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer rails to guide roll-off containers * Steel floor with roller recesses in the bogie area * For hooklift container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical plug-in stop angles at the front of the track * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip locators for lateral centering of the skips, front 4 locators plug-in with swinging stop * Weld seam as anti-slip surface in the ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for hooking in securing elements for positive and non-positive locking of skips, 4 cloverleaf-type lashing bars per side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t lashing eyes per side flush-mounted in the outer frame ----Ramps: Dsdpjl Tld Iofx Acfjuu * Aluminium approach ramps (10.6 t per pair), 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides & rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight technically up to 20,000 kg * New vehicle, never registered, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egstorf