Müller-Mitteltal T3 Tiefl., Luft., Schwarzdeckentransporte nakup rabljenega (3.368)

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle units ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at front * Bolt-on, hot-dip galvanized folding supports at rear (external) * Side underrun protection * Plastic quarter mudguards * Plastic toolbox on front right, externally mounted on front wall ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Load Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted bulkhead made of smooth steel sheet * Drop sides made of trapezoidal-profile steel sheet, foldable with sideboard spring lifter * Hot-dip galvanized bolted rear stanchions ----Load Securing: * Perforated outer rail, edged at approx. 45°, with lashing capacity of 2 t every 480 mm * Optional 3 t folding lashing brackets every 600 mm (five lashing rings mounted per side) * One 6.3 t lashing ring in each corner, front and rear * Various bores in front and rear crossmembers for 1.2 t lashing points ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed into the chassis frame under the loading area ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Sideboard colour in RAL 9010 pure white * Painting of side walls in a RAL colour of choice available at extra charge ----Information: * New vehicle, not registered * Subject to errors and prior sale Iedpjl Tilxefx Ag Eeif ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-tonne Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering device ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck display via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing spotlights (switched via reverse gear) * LED lighting ----General fittings: * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame bent at 45°, hole pattern for lashing equipment, lashing force per lashing point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg drop lashing brackets at approx. 600 mm spacing possible – each side is equipped with 12 pcs. 3,000 kg lashing brackets included in delivery * Each side has 5 pockets for 100 x 50 mm stake posts in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum supports: * 3 pcs. galvanised drum supports secured by container locks with side forklift pockets center/center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm Iisdpsx Nli Nefx Ag Esf * Clear width between support arms approx. 1,775 mm, with cross-bracing * Permissible drum weight per cable support 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing drum shaft * Steel drum shaft 76 mm diameter, with centring and rotating ends * 2 locating rings * 2 centring cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for securing the drum against rotation and uncoiling by the customer ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 tonnes GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from week 51/2026

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 18.0: * 3-in-1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm drawbar eye with height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS, display option in the truck via EBS signal (no installation required on the truck side) ----General Attachments: Iodsl Thv Ropfx Ag Eeif * Toolbox made of powder-coated steel sheet, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box made of galvanized sheet metal for container nets, approx. 960 x 300 x 400/450 mm, right side * Plastic bumper buffer at rear * Mechanical drop-down supports at rear ----Load Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with roller recesses in the bogie area * Possible to transport roll-off containers with a length of 5,500–7,000 mm * Pneumatic four-point clamp locking as well as mechanical locking angles at the front in the track, securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. volume of 10 m³ possible * Includes 8 removable tub stops for lateral centering of the tubs; front 4 stops plugged in with pivotable stop * Weld bead as anti-slip coating in the ramp area of the run-up incline ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements to securely fix the tubs * 4 lashing bars per side, cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminium drive-on ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-wheeled and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight up to 20,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. calendar week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment device ----Electrical / Lighting: * LED tail lights * 15-pin power connector * TPMS, display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet, approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear collision protection buffers * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, possible container length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking as well as mechanically insertable stop angles at the front in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 removable skip stops for lateral centering of the skips, front 4 skip stops inserted with pendulum mount * Weld bead as anti-slip coating in the ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips * 4 lashing bars each, cloverleaf design (side) * 1 pair of 13.4 t UVV lashing rings to the front ----Ramps: * 1 pair of aluminum access ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 Ijdpfx Agel Thwce Eeif * Permissible gross weight of 20,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. CW 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lowering system and RtR valve * Smard board for load weight determination * Warning sign packages front & rear * Reflective contour marking tapes on sides and rear * Rotating beacon (removable) at rear * LED lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 flush storage compartments with lids, lockable * Chassis made of high-strength fine-grained steel * Decking above turntable platform: 50 mm softwood, in low-bed platform: 60 mm softwood * Outer planks of access ramps: hardwood * Each side features 4 stake pockets (stakes not included), with simultaneous 2 t lashing points * Lashing package includes: 2 lashing rings 6.4 t, front left and right on main frame of turntable platform * On sides, front & rear, 2 pairs of 13.4 t lashing rings on outer frame; sides each with 4 pairs of 10 t lashing rings, pivoting & lowerable * Loadable in all directions, recessed in the outer frame Ijdpfx Agel Tphre Esif * 2 pairs of 6.4 t lashing rings on the excavator stick rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not in the rear slope) * Extension planks stored left side in a stowage compartment * Excavator stick rest above rear axle to rear slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports, rear * Hydraulic folding ramps with hydraulic tip section approx. 4,650 x 720 mm including lateral hydraulic ramp shift & load holding valve * Load area over turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, ramps, outrigger arms, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air reservoir, and turntable painted in a black tone * Tires: 235/75 R 17.5 * New vehicle, not previously registered, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 30.440 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40,0 ----Zavore: Ijdpfjylfvmex Ag Eoif * Wabco EBS-E (električni zavorni sistem) * Naprava za izredno sprostitev zavor za cilindere vzmetne akumulacije * Bobnaste zavore ----Osi: * 4 x 11 t Gigant osi ----Vzmetenje: * Zračno vzmetenje s sistemom za dvig in spuščanje ter ventilom RtR ----Povezava vlečne glave: * Naravna povezava vlečne glave s 50 mm vtičnico in brezstopenjsko nastavljivo višino ----Elektrika / Osvetlitev: * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikazovanja na zaslonu tovornjaka preko signala EBS - brez namestitve na tovornjaku * SmartBoard kot informacijsko orodje z senzorji tlaka za prikaz obremenitve osi na posamezni skupini osi * 15-polni električni vtič * LED zadnje luči * LED obodna svetila (odstranljiva) zadaj ----Splošni dodatni deli: * Paketi opozorilnih tablic spredaj in zadaj * 2 x orodne omare iz pocinkane in prašno lakirane jeklene pločevine, cca 650 x 300 x 600 mm, na desni strani * Spredaj zaprt plastični blažilnik * Zadaj ravne jeklene zaščitne plošče s ščitnikom proti brizganju (zmanjšanje pršenja) * Stranski zaščitni element ----Površina nizkega nakladalnika: * Podaljšana platforma z vrtljivim podvozkjem za 520 mm, z 45° koti in 3 vgrajenimi predali z pokrovi in ključavnico * Talna obloga nad platformo z vrtljivim podvozkjem iz 50 mm iglasta lesa, v platformi nizkega nakladalnika pa iz 60 mm iglasta lesa * Gumijasta obloga 20 mm namesto lesene talne obloge v območju poti, s skupno dolžino nizke platforme 6.780 mm, vključno z rampo za vožnjo * Gumijasta obloga na rampi za vožnjo na levi in desni strani, dolžina cca 860 mm * Na vsaki strani 4 žepi za opornike (oporniki niso vključeni), skupaj z možnostjo pritrjevanja dveh ton * Okvir, izdelan iz visoko trpežnega finozrnatega jekla ----Šasi: * Šasi iz visoko trpežnega finozrnatega jekla ----Zavarovanje tovora (paket Lasi): Platforma z vrtljivim podvozkjem: * 2 para 13,4 t pritrdilnih točk v zunanjem okvirju platforme z vrtljivim podvozkjem Nizka platforma: * Na vsaki strani 4 pari 10 t pritrdilnih točk na zunanjem okvirju, z možnostjo spuščanja in obremenitve v vse smeri * Na vsaki strani zadaj 2 para 13,4 t pritrdilnih točk, ki se lahko vrtijo ----Rampe: * Gumijasta obloga na zložljivih rampah za vožnjo * Hidravlične zložljive rampe z hidravlično nastavljivim končnim delom, cca 4.650 x 720 mm * Hidravlično stransko premikanje ramp in varnostni ventili za obremenitev ----Zadnja opora: * Hidravlična zadnja opora ----Širitev: * 8 parov pocinkanih zložljivih podaljškov za 3 m skupne širine (vendar ne na zadnji rampi) * Plošče za razširitev, nameščene na levi strani v predelu za shranjevanje ----Nosilec za bager: * Nosilec za bager nad zadnjo osjo do konca rampe za vožnjo, cca D=2.100 mm x Š=740 x V=190 mm * 2 para 13,4 t pritrdilnih točk na nosilcu za bager ----Hidravlika: * Hidravlični razdelilnik pretoka na prikolici (pri hidravlični moči črpalke na tovornjaku, ki je večja od 40 - maks. 120 l/min) ----Dimenzije nakladalnega prostora: * zadnja nakladalna površina: cca 6.780 x 2.520 mm (vključno z 860 mm rampo za vožnjo) * nakladalna površina nad vrtljivim podvozkjem: cca 2.990 x 2.520 mm ----Višina nakladanja: * pribl. 890 mm, +/- 20 mm ----Barvanje: * Stranska in zadnja odsevna pasova * Šasi, vrtljivi podvozek, rampe za vožnjo in zložljivi podaljški, vroče pocinkani * Osi, povezava vlečne glave, zračni rezervoar in vrtljivi podvozek, pobarvani v črno barvo ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized Iijdpfxexptn Dj Ag Eof * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery Time: Available immediately*

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary) * LED lighting system 12/24 V * Removable rear LED beacon ----General Accessories: * Mechanical warning plate kit for 3 m total width * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left * Front axle with plastic mudguards, rear with galvanized steel mudguard skirts ----Low Loader Platform: * Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers * Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform * Bamboo wood between the longitudinal beams in front of the excavator arm rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at front corners * 2 x 13.4 t UVV lashing points each at side front and rear corners * 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions) * 4 stake pockets per side with additional 2 t lashing capability each * 1 x 16 t UVV lashing ring on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side) ----Excavator Arm Rest: * Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest ----Ramps: Iisdpfx Ajl Tihueg Eof * Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines ----Paintwork: * Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stanje: novo, največja dovoljena obremenitev: 30.440 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40,0 ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Naprava za hitro sprostitev zavore za vzmetne akumulatorske cilindre * Bobnaste zavore ----Osi: * 4 x 11 ton Gigant osi ----Vzmetenje: * Zračno vzmetenje z dvigalom in spuščanjem ter ventilom za ohranjanje višine ----Vlečna naprava: * Naravna vlečna naprava s 50 mm vlečno oglico in nastavljivo višino ----Elektrika / Osvetljava: Iiedeylfvgjpfx Ag Eef * Sistem za nadzor tlaka v pnevmatikah z možnostjo prikazovanja na zaslonu tovornjaka preko signala EBS – brez dodatne namestitve na tovornjaku * SmartBoard kot informacijsko orodje z dajalniki tlaka za prikaz obremenitve osi na vsaki skupini osi * 15-polni vtič * LED zadnje luči * LED luči za osvetlitev vseh strani (odstranljive) zadaj ----Splošni dodatni deli: * Paketi opozorilnih tabel spredaj in zadaj * 2 x orodjna omara iz pocinkane, prašno lakirane jeklene pločevine, približno 650 x 300 x 600 mm, na desni strani * Spredaj zaprt, plastičen, posamični blatnik * Zadaj naravna jeklena ščitnika za blatnike, vsak z zaščito proti brizganju (zmanjševanje brizganja) * Stranski zaščitni sistem ----Nizka platforma: * Podaljšana platforma z vrtljivo podvozi za 520 mm, z 45° koti in 3 vgrajenimi predali z pokrovi, ki se lahko zaklenejo * Talna obloga nad platformo z vrtljivo podvozi iz 50 mm, v nizki platformi pa iz 60 mm iglavca * Gumijasta obloga 20 mm namesto lesene talne obloge na območju teka, z dolžino nizke platforme 6.780 mm, vključno z rampo za vožnjo * Gumijasta obloga na rampi za vožnjo, levo in desno, dolžine približno 860 mm * Na vsaki strani 4 žepi za nosilce (vendar nosilci niso vključeni), hkrati pa omogočajo pritrditev tovora z 2 tonami * Hidravlično nastavljivi stranski raztezniki za 3 m širine (vendar ne na zadnji rampi) * Stranske deske za razširitev, shranjene v predalu * Nosilec za roko bagra nad zadnjo osjo do konca rampe za vožnjo, približno D=2.100 mm x Š=740 x G=190 mm * 2 para pritrdilnih točk 6,4 tone, stransko v nosilcu za roko bagra ----Podvozje: * Podvozje iz visoko trdnega jekla z drobno zrnato strukturo ----Pritrditev tovora (paket Lasi): Platforma z vrtljivo podvozi: * 2 para 13,4-tonske pritrdilne točke v zunanjem okvirju platforme z vrtljivo podvozi Nizka platforma: * Na vsaki strani 4 pare 10-tonske pritrdilne točke na zunanjem okvirju, ki se lahko spustijo in so obremenljive v vse smeri * Na zadnji strani, na vsaki strani 2 para pritrdilnih točk 13,4 tone, vrtljivih ----Rampe: * Gumijasta obloga na zložljivih rampah za vožnjo * Hidravlično zložljive rampe z hidravlično nastavljivim vrhom, približno 4.650 x 720 mm * Hidravlična stranska premika rampe in ventili za zadrževanje tovora ----Zadnji opornik: * Hidravlični zadnji opornik ----Razširitev: * 8 parov pocinkanih zložljivih podaljškov za 3 metre skupne širine (vendar ne na zadnji rampi) * Stranske deske za razširitev, shranjene v predalu ----Nosilec za roko bagra: * hidravlična enota za razdelitev pretoka v prikolici (pri hidravlični moči črpalke v tovornjaku nad 40 - največ 120 l/min) ----Mere za nakladanje: * zadnja nakladalna površina: približno 6.780 x 2.520 mm (vključno z rampo za vožnjo 860 mm) * nakladalna površina nad vrtljivim obročem: približno 2.990 x 2.520 mm ----Višina nakladanja: * približno 890 mm, +/- 20 mm ----Barvanje: * Reflektirajoči obrobni trak na straneh in zadnji strani * Podvozje, vrtljiva platforma, rampe za vožnjo in zložljivi podaljški, vroče pocinkani * Osi, vlečna naprava, zračni rezervoar in vrt

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm Iiodpfjrwc R Aex Ag Eef * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Fittings: * Aluminum air reservoir * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: Iodpsx Nlkaofx Ag Eeif * Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included * 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included) * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with transverse brace * Maximum drum weight per support 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling ----Loading height: * Approx. 1,040 mm when loaded ----Coating: * Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized * Axles painted in a black shade

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar, 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring system with display capability in the truck dashboard via EBS signal - without truck-side installation - * 15-pin power connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General Fittings: * Aluminium air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun guard ----Platform Bed: * Zurr-fix outer frame, 45° edged with hole pattern for lashing equipment, lashing force per point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – as standard, each side fitted with 12 x 3,000 kg lashing rings * Each side with 5 sockets for stakes 100 x 50 mm in the outer frame – stakes not included in delivery * 30 mm phenolic plywood floor ----Drum Supports: * 3 galvanised drum supports secured via container locks, with lateral forklift pockets, centre-to-centre 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clearance between support arms approx. 1,775 mm, with crossbeam * Maximum drum weight per cable drum support: 6,000 kg * Without drive and without drum brake * Support arm with locking device for securing drum shaft * 76 mm diameter steel drum shaft with centring and rotatable ends * 2 set collars * 2 centring cones made of polyamide * 4 x 3.2 t lashing eyes on support arms for customer-side securing of drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm loaded ----Coating: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black Ijdpfx Agex Nlkgj Ejif ----Information: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. CW 51 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Platform Trailer Available in week 37/2026, Inquiry No.: 31941 Delivery to your address possible * We are happy to provide you with an individual offer * ---- * GVW: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized 400mm front wall * Hardwood excavator bucket rest screwed to the front wall * Unloaded deck height: 930 mm / loaded: 870 mm * One-piece ramps with hot-dip galvanized anti-slip grating, can be pushed together to approx. 20 mm, secured by retaining rods and inclined supports * Ramp lift with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° angled, perforated for lashing devices, lashing capacity per point LC 2000 daN with minimum spacing of 480 mm. Installation of drop lashing rings LC 3000 daN with approx. 600 mm spacing possible) with tight cross bracing, high-web front and rear end sections and access ramp at the rear, hot-dip galvanized * 10 recessed UVV lashing rings LC 3000 daN in the existing hole matrix in the outer frame, additionally * Further lashing options via drill holes (Ø 50 mm, LC 1200 daN) in the front and end beams Isdpozbfmqefx Ag Ejif * Toolbox in front of the front wall * Side marker lights with indicator activation * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * Height-adjustable support winch at the front, foldable supports at the rear * 2 container locks recessed in the front crossmember * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable, 50 mm eye available upon request * 1 LED marker light removable at the rear ---- * Leasing, hire purchase, financing, trade-in possible * e.g. 525 Euro per month over 60 months with no down payment or final residual value ---- * Our business hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside of business hours available by appointment We speak German, English, Polish, French Leasing, financing, trade-in available

Stanje: rabljeno, največja dovoljena obremenitev: 7.950 kg, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2010, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna teža: 11.000 kg Lastna teža: 3.050 kg Nosilnost: 7.950 kg Skupna dolžina: 8.100 mm Nakladalna dolžina: skupno cca 6.000 mm Širina: 2.550 mm / nakladalna širina cca 2.470 mm Nakladalna višina: 900 mm Dodatne informacije - po višini nastavljiva vlečna ojnica - podporna noga - stranske stene 400 mm, vzmetene - električno kolo - BPW osi - rešetkaste klančine z vzmetjo, bočno pomične - plezalne letve, zadnja podpora - velik pritrdilni paket Iijdpox E I Utefx Ag Ejf

Stanje: rabljeno, največja dovoljena obremenitev: 8.900 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 12/2011, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Dodatne informacije Iiodpozb Ua Tjfx Ag Eef - Rampske površine z rešetko - Vzmetne rampe - Zložljive podporne noge - LED vzvratne luči - Vzmeti za stranske stene - BPW osi - Stranske stene 400 mm - Uporabna dolžina 6.000 mm vklj. z zadnjim prislonom cca 1.100 mm

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear Iisdpoxmpykofx Ag Ejf * SmartBord infotool installed with pressure sensors for displaying axle group loads * Reflective contour tape on the sides and rear * LED beacon (removable) at the rear * 15-pin electrical connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front enclosed individual plastic mudguards * Rear straight steel mudflaps with spray suppression * Side underrun protection * Extension in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable folding lids (folding lids open towards the rear) * Chassis made from high-strength fine-grain steel * Floor over bogie platform made of 50 mm softwood, and in the low-bed platform made of 60 mm softwood * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t each at the front left and right on the main frame of the bogie platform; one pair of 13.4 t lashing rings at the front and rear sides of outer frame; one pair of 10 t lashing rings on each side foldable and lowerable, loadable in all directions, integrated into the side frame; 5 t bolted lashing rings on the outer frame of the wheel recesses (2 per front wheel recess, 1 per rear); 2 pairs of 6.4 t lashing rings at the excavator stick compartment * 11 pairs of fold-out outriggers for overall width of 3 m (not on the rear incline) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for width-extension planks, steel, mounted crosswise to the loading area in front of the first rear axle * Excavator stick compartment above the rear axle extending to the end of the ramp incline, approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulic extendable tip, approx. 4,650 x 720 mm * Hydraulic sideward ramp displacement * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded deck height approx. 890 mm ± 20 mm (including 860 mm ramp incline) * Chassis, bogie, fold-out outriggers, rear supports, and access ramps fully hot-dip galvanized * Axles, air tanks, and drawbar painted in black shade * Tires: 235/75R17.5 * Vehicle is fully hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – without truck-side installation * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord infotool installed with pressure sensors for total axle load display per axle group * Reflective contour tape on the sides and rear * LED rotating beacon (removable) at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed single plastic mudguards * Straight rear steel mudflaps, each with spray suppression * Side underrun protection * Superstructure in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable folding lids (folding lids opening to the rear) * Chassis made from high-strength fine-grained steel * Floor over the bogie platform made of 50 mm softwood, and 60 mm softwood in the low loader platform * Outer planks of the drive-on ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, 1 pair each of 13.4 t lashing rings at the front and rear outer frame, 1 pair each of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front recess, 1 at the rear), 2 pairs of 6.4 t lashing rings on the excavator stick holder * 11 pairs of folding outriggers for a total width of 3 meters (not at the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the widening boards made of sheet steel, mounted transversely to the loading area in front of the first rear axle * Excavator stick holder above the rear axle up to the end of the approach slope approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on the bogie platform) for transporting wheel loaders with a wheelbase of 3,100 - 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area over the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loading height loaded approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding outriggers, rear drop-down supports, and drive-on ramps galvanised * Axles, air tanks, and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is galvanised * New vehicle with manufacturer’s warranty Iiodpfx Agoxmpydo Eef * Errors and prior sale reserved * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle compensation ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle ----Lighting / Electrics: * TPMS Tire Pressure Monitoring System * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable warning beacon * 15-pin power connector ----General Equipment: * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning panel kits front and rear * VA closed plastic mudguards in front and straight galvanized steel skirts at the rear, each with spray protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Four stake pockets per side (stakes not included), also with lashing function ----Load Securing (La-Si package consisting of): * 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 6 pairs of UVV folding and retractable lashing rings, loadable in all directions and countersunk into the outer frame * 13.4 t at corners, 10 t otherwise ----Widening: Iijdpfel Th Nnex Ag Ejf * 6 pairs of manual folding outrigger arms for 3 m overall width (not on the sloped rear section) * Widening boards stowed in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way hydraulic control unit pre-installed for optional hydraulic side shift of ramps ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (incl. 860 mm entry incline) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Finish: * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Information: * Permissible total weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex stock Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.770 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps * NEW VEHICLE without first registration, * Now immediately available in RAL 7016 Anthracite, Enquiry number: 11653 * Gross weight: 11.9t, Payload: 8.77t * Reinforced and certified body according to EN 12642 XL, incl. load securing certificate * 6.27m x 2.47m x 0.4m steel side walls, laser-welded, drop-down with 2 spring assists * Front wall bolted, smooth sheet metal (hot-dip galvanized) * Rear wall: (hot-dip galvanized), stored in front of the ramps with empty holder behind front wall * Rear stakes bolted (hot-dip galvanized) * 50mm thick softwood floor * 4 UVV lashing rings LC 6300daN, recessed in front and rear cross members * 10 UVV lashing brackets LC 3000daN, recessed in the existing hole pattern in the external frame * Ramps: one-piece with hot-dip galvanized grating, non-slip version * Fixture in front of front wall for retrofitting container locks Isdpfx Asyxbdbsg Esif * Plastic toolbox in front of the front wall * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (4 wheels), parabolic suspension * BPW axles with tyre pressure monitoring * EBS, 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40mm tow eye * 2 LED reversing lights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with indicator function * 1 removable round LED warning beacon, including bracket and installation ---- * Trade-in possible * Financing available through our partners, with or without down payment/residual value, and various terms. Request a quote! ---- * Leasing example from our partner FM LeasingPartner: €485 per month net for 60 months, no down payment, zero final payment. Other terms with or without down payment/residual value possible. Ask us for a quote! We are an authorized MüllerMitteltal dealer! ---- * Our opening times: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours we are available by appointment * We speak German, English, Russian, Polish and French.

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 19.0: ----Brakes: * Wabco EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs – 110 mm wide – with tandem equalisation unit ----Drawbar / Drawbar Eye: Drawbar with 50 mm flange eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tyre monitoring system ----General Attachments: * Jost landing leg at the front * External folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Preparation in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal-profiled steel, foldable with drop side spring lifters * Steel rear wall can be slid in between the ramps – storage bracket inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In front and rear corners, each 1 x 10 t lashing ring; various holes in front wall and rear crossmember for 1.2 t lashing option * Profifix lashing rail centrally positioned along the longitudinal axis, with lashing capacity up to LC 3000 daN ----Ramps: * One-piece mech. grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be compacted to 20 mm) * Rear approach slope approx. 860 mm ----Painting: * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanised * Sideboard painted in RAL 9010 pure white * Painting of the side panels in any RAL colour available at extra cost * Axles, springs, air tank, flange eye and landing leg painted in black ----Info: Iodpfjl Th Hljx Ag Eeif * New vehicle with full manufacturer's warranty * Errors and prior sale subject to change ----Delivery Time: * Available immediately ex-works at Egestorf on the A7

Stanje: rabljeno, lastna masa: 8.680 kg, največja dovoljena obremenitev: 31.320 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2018, vzmetenje: drugo, velikost pnevmatike: 235/75R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5, velikost zadnje pnevmatike: 235/75R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Privezne ušesca, ABS, razširitev z opozorilnimi tablami, vozilo se prodaja po naročilu., -- Pridržujemo si pravico do tiskarskih napak, sprememb in napačnih podatkov, vzorčne slike --, Več podatkov na: !, More Details: ! Ijdpfezrqidox Ag Esif

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2008, dolžina tovornega prostora: 12.500 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 12.500 mm, Oprema: ABS, Nizkopodna prikolica iz nemške lasti Ijdpfszu Duxjx Ag Eoif * Tehnična dovoljena masa: 48.000 kg * Lastna teža: 8.750 kg * Zračna vzmetitev * Pnevmatike 235/75 R 17,5 * Globina profila povsod približno 50–60 % * Višina sedla približno 1,35 m * Nakladalna površina 8500 / 3000 mm * Stranske podaljške je mogoče razširiti * ABS * Mehanske dvižne rampe, 1-delna, s sistemom za razbremenitev vzmeti * Stranske plošče za podaljšanje, spredaj in zadaj * Osnova BPW Veljavnost tehničnega pregleda poteka 05.2026 Veljavnost varnostnega pregleda poteka 11.2025

Stanje: rabljeno, največja dovoljena obremenitev: 7.600 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 05/2007, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.442 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2007, Oprema: ABS, Müller Mitteltal, samovozna prikolica s tremi stranmi in aluminijastimi rampami, nastavljiva vlečna priprava, listnate vzmeti, gume: 235/75 R 17,5, jeklene stranske stene, višina 500 mm, dodatna podpora vzmeti, popolnoma odporna proti rji, brez udarcev, prikolica je bila skorajda neuporabljena. Lokacija: 92436 Bruck, Biedermannsiedlung 8, gospod Hinz, e-pošta: hv, WhatsApp: Iisdpfxezuiv Us Ag Eof

Stanje: novo, vzmetenje: drugo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Storage compartment for aluminium ramps, price per compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm, -- printing errors, mistakes and changes reserved, sample images --, For more data see: !, More details: ! Iedpfeztd Nyox Ag Eoif

Stanje: rabljeno, prva registracija: 10/2014, skupna masa: 27.000 kg, lastna masa: 5.100 kg, barva: siv, vrsta prenosa: drugo, emisijski razred: noben, Leto izdelave: 2014, največja dovoljena obremenitev: 21.900 kg, naslednji pregled (TÜV): 03/2027, vzmetenje: jeklo, velikost pnevmatike: 265/70 R19.5, velikost sprednje pnevmatike: 265/70 R19.5, velikost zadnje pnevmatike: 265/70 R19.5, voznikova kabina: drugo, Oprema: ABS, dodatne luči, elektronski program stabilnosti (ESP), meglenke, osvetlitev, registracija tovornjaka, zavorni sistem na stisnjen zrak, šasija, Müller Mitteltal remorque 3 essieux pour conteneurs à benne basculante TM 2 24,0 * Conçue pour 2 conteneurs/bennes de 12 m³ chacun * Timon pneumatique abaissable pour chargement frontal * Point d'arrêt réglable pour la fixation du conteneur * Arrimage manuel avec cliquets * Plancher étanche * Essieux BPW * Suspension à lames * Châssis/cadre galvanisé * Freins à tambour * Plaques d'usure * Phares additionnels * 7 anneaux d'arrimage par côté montés à l'extérieur * Grande caisse à outils * Poids : PTAC - 27 000 kg, Poids à vide - 5 170 kg, Charge utile - 21 830 kg * Véhicule allemand avec papiers allemands !! * 1ère main !! * 1ère mise en circulation : 21.10.2014 * Contrôle technique valable jusqu'à 03/2027 * Contrôle sécurité valable jusqu'à 09/2026 * VIN : WMM00000E0058208 Sous réserve de vente préalable, erreurs et modifications ! Les logos d'entreprise ont été supprimés de certaines photos – merci de demander ! Aucune garantie sur le fonctionnement des équipements supplémentaires ! Contact : Christoph Ott Ijdpfx Aszbbbdog Eeif Tél. + WhatsApp :