Müller-Mitteltal Neuer 18 To. Kippbarer Container Anhänger nakup rabljenega (35.741)

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Zavore: * Zavorna sistema EBS * Naprava za izpust zavor v primeru izrednih razmer za cilindr z vzmetjo * Bobnaste zavore ----Osi: * 2 x 5,5 t BPW osi ----Vzmetenje: * Parabolične vzmeti z izravnalnim mehanizmom ----Vlečna priprava / priključna plošča: * Vlečna priprava, nastavljiva po višini za 300 mm * 40-milimetrska priključna plošča ----Splošni dodatni deli: * Sprednja opora Jost * Zunanje, vroče pocinkane, zložljive opore zadaj * Plastični blatniki * Plastična orodjarna škatla spredaj desno na čelni steni ----Elektrika / osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED-osvetlitev ----Nosilna površina: * Nosilna površina 6,27 m * Primerna za transport kontejnerjev * 50-milimetrski pod iz iglastih plošč * Pred čelno steno je nameščen priključek za poznejšo montažo zaklepov za kontejnerje * Vijolična čelna stena iz gladkih pločevin * Stranske stene iz jeklenih pločevin, trapezno profilirane, z možnostjo zlaganja z vzmetmi za podpiranje * Jeklena zadnja stena, ki se lahko potisne med držala za nakladalno ploščad, ko ni v uporabi, je nameščena notri pred čelno steno * Zadnji nosilci, vijeni ----Pripomočki za pritrditev tovora: * Zunanji okvir z luknjami, oblikovan pod kotom približno 45 stopinj, s silo vlečenja 2 t na vsakih 480 mm * Možna je vgradnja 3-tonskih kljuke za pritrditev tovora na vsakih 600 mm * V kotih spredaj in zadaj po 1 x 6,3-tonska kljuka za pritrditev tovora * Na čelni in končni nosilni nosilci različne luknje za pritrditev tovora s silo 1,2 t ----Nakladalne rampe: * Enodelne, mehanične nakladalne rampe z vzmetmi za delovanje z eno osebo, približno 2.750 x 600 mm (lahko se združijo do 20 mm) * Nakladalni nagib zadaj približno 860 mm ----Pnevmatike: * Pnevmatike: 235/75R17.5 ----Medosna razdalja: * Medosna razdalja: 990 mm ----Barvanje: * Vroče pocinkano podvozje, vlečna priprava, čelna stena, zadnja stena, zadnji nosilci in nakladalne rampe * Barvanje stranskih sten v barvi RAL 9010, čista bela * Barvanje stranskih sten v drugi barvi RAL je mogoče, vendar za doplačilo Bwsdpeq Ra D Esfx Ak Asr ----Informacije: * Pridržujemo si pravico do sprememb in napak * Novo vozilo z garancijo proizvajalca ----Dobavni rok: * Na voljo takoj iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 19.0: Bwsdpfx Akol Th Hwo Ajr ----Braking system: * Wabco EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem compensation unit ----Drawbar / Flange drawbar eye: Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tyre pressure monitoring system ----General fittings: * Jost landing gear at the front * Outboard folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Drop sides made of trapezoidal profile steel sheeting, foldable with tailboard spring assist * Steel rear wall insertable between ramps - holder for storage when not in use in front of headboard * Bolted rear stakes ----Load securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * One 10 t lashing ring in each front and rear corner, various drill holes in the front and rear cross-members for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis centre for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Chassis, drawbar, headboard, rear wall, loading ramps, and folding supports hot-dip galvanized * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL colour available at extra cost * Axles, springs, air tanks, flange drawbar eyes and landing gear painted in a shade of black ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye, height-adjustable by 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights 12/24 Volt ----General Attachments: * Jost landing leg at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Reinforcement package on chassis for drilling rig transport * 50 mm softwood floor, clamped type * Preparation in front of front wall for retrofitting container locks * Bolted smooth plate front wall * Split steel side walls – trapezoidal profile – foldable with central folding stanchion * Steel rear wall slide-in between ramps – bracket for storage in front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * Lashing package: 1 x 10 t UVV lashing ring in each front and rear corner, 2 x 8 t UVV retractable lashing rings each side in the outer frame, various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece slide-in ramps 12 t/pair, ramps approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm Bedpfx Aemi Tmaek Aewr ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, rear flap, folding supports and access ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye and landing leg painted in a shade of black--- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes Bodpfxel Thy Rj Ak Ajwr ----Axles: * 2 x 5.5 t Gigant axle assemblies ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, approx. 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost mechanical landing gear, front * External, hot-dip galvanized folding supports, rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted on front wall outside ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood floor * 20'' container locks mounted at front and rear * Bolted smooth steel front wall * Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side) * 1 x 6.3 t lashing ring fitted in each corner front and rear * Various holes in front and rear transverse beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment integrated in the chassis below the loading area ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Drop side color in RAL 9010 pure white * Side panels can be painted in a RAL color at extra cost ----Info: * New vehicle without registration * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing device ----Drawbar / Flange Hitch Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Fittings: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, fitted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Provisions in front of the bulkhead for retrofitting container locks * Bolt-on 400 mm bulkhead made of smooth sheet * Removable rear stanchions, bolted * Drop sides with spring assist ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * 1 x 6.3 t lashing point in each front and rear corner * Various holes in the headboard and rear crossmember for 1.2 t lashing options * Profifix lashing rail centrally positioned along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-on ramps, approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck of over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoirs, landing gear front, and flange hitch eye painted in black shade * Drop sides painted in RAL 9010 pure white Bjdpjrwc R Rjfx Ak Aowr * Painting of the side walls in a RAL color of your choice available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists * Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load Securing: * Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t fold-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm) Bsdpfxoq Dyvys Ak Aewr ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost ----Info: * — Reinforced and certified body according to EN 12642 XL including load securing certificate — * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye Bwjdpfx Akspk D Dqe Asr ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: Bwedspk D D Ujpfx Ak Asr ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Braking System: * EBS Electronic Braking System * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Tow Bar / Flange Towing Eye: * Height-adjustable tow bar, adjustable by 300 mm * Tow bar extension by 250 mm to a total of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * Tire pressure monitoring system (TPMS) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right side of the headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Trapezoidal profiled drop-side walls made of steel, foldable with drop-side spring assist * Steel rear wall insertable between ramp mounts; when not in use, stowed inside in front of the headboard * Bolt-on rear posts * Rear approach angle approx. 860 mm Bwjdepk Dv Rspfx Ak Asr ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing point in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as tow bar, headboard, rear wall, tailgate, and ramps * Side wall color RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall Bsdpopk D Dmofx Ak Aswr * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle units ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at front * Bolt-on, hot-dip galvanized folding supports at rear (external) * Side underrun protection Bwedpfxel Tilxe Ak Aer * Plastic quarter mudguards * Plastic toolbox on front right, externally mounted on front wall ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Load Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted bulkhead made of smooth steel sheet * Drop sides made of trapezoidal-profile steel sheet, foldable with sideboard spring lifter * Hot-dip galvanized bolted rear stanchions ----Load Securing: * Perforated outer rail, edged at approx. 45°, with lashing capacity of 2 t every 480 mm * Optional 3 t folding lashing brackets every 600 mm (five lashing rings mounted per side) * One 6.3 t lashing ring in each corner, front and rear * Various bores in front and rear crossmembers for 1.2 t lashing points ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed into the chassis frame under the loading area ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Sideboard colour in RAL 9010 pure white * Painting of side walls in a RAL colour of choice available at extra charge ----Information: * New vehicle, not registered * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on drawbar eye Bwsdol Th Dmopfx Ak Aor ----General Attachments: * Jost landing gear at the front * Lateral underrun protection * Foldable A-frame shield at the rear ----Electrics / Lighting: * 15-pin power socket * Multi-chamber taillights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding steel plate support 750 x 1,000 mm at the front, incl. 2 interchangeable skip stops at the front, plug-in at 2 positions each * Rear crossmember designed for aluminum loading ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unloaded loading height approx. 710 mm ----Load Securing: * 4 repositionable skip stops, can be placed in 2 positions for lateral centering of skips * Each side with 1 x (13.5 t) UVV tie-down point for securing lashings * 2 ratchet tensioners (spindle adjustment) with balancing chain and quick shortener (tension force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paint / Finish: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a day registration from 06/2024 due to missing tire pressure monitoring system and has not been loaded/used * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-tonne Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering device ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck display via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing spotlights (switched via reverse gear) * LED lighting ----General fittings: * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm Bjdsx Nli Nspfx Ak Ajwr * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame bent at 45°, hole pattern for lashing equipment, lashing force per lashing point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg drop lashing brackets at approx. 600 mm spacing possible – each side is equipped with 12 pcs. 3,000 kg lashing brackets included in delivery * Each side has 5 pockets for 100 x 50 mm stake posts in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum supports: * 3 pcs. galvanised drum supports secured by container locks with side forklift pockets center/center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross-bracing * Permissible drum weight per cable support 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing drum shaft * Steel drum shaft 76 mm diameter, with centring and rotating ends * 2 locating rings * 2 centring cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for securing the drum against rotation and uncoiling by the customer ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 tonnes GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from week 51/2026

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flange eye ----General Fittings: * Jost mechanical landing gear at front * Rear: 2 mechanical, hot-dip galvanized drop-down support legs * Plastic toolbox approx. 750 x 350 x 300 mm, fitted on right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking fixtures, plus 2 at the front wall * Steel pallet, 3-way tipping body (continuous sidewalls – without center stanchions – foldable with drop side spring assistance) * Rear stanchions bolted * Combination steel double rear doors, asymmetrically split, can be swung open and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized swing bolt locking and central locking system * Deactivation function for automatic rear wall opening when tipping backwards with open door * 4 mm steel floor plate * Rear ramp carrier rail for drive-on ramps ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t recessed lashing rings per side, fitted in the outer frame ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for vehicles on rubber tires & tracks * Lockable storage compartment for ramps under the loading platform, integrated into the chassis ----Paint Finish: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, and mechanical support legs hot-dip galvanized * Sidewalls and tailgate painted RAL 9010 pure white * Sidewall painting in any RAL color available at extra charge * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Body reinforced with load securing certificate according to EN 12642 XL Bodpfx Aksl Thyxj Aewr * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex-works Egestorf on A7

Stanje: rabljeno, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange towing eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on towing eye ----General attachments: * Jost landing gear at the front * Side underrun protection * Foldable A-panel at the rear ----Electrics / Lighting: * 15-pin power connector Bwodpfjl Th Eyex Ak Ajr * Multi-chamber tail lights ----Superstructure: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding plate cover 750 x 1,000 mm at the front incl. 2 removable skip stops, front in 2 positions * Rear cross member for attaching aluminium ramps, incl. 2 additional drop-down supports at the rear ----Loading edge: * Unloaded loading edge approx. 710 mm ----Load securing: * 4 removable skip stops, can be inserted into 2 positions for lateral centring of the skips * On each side: 1 x (13.5 t) UVV lashing point for attaching tensioning devices * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick-shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * The axles, springs, landing gear, and air tank painted in a black tone ----General information: * Vehicle has a one-day registration in 06/2024, due to missing tyre pressure monitoring system it has not been loaded/used * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf Bwodpjxf Skpofx Ak Aer

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Towing Eye: * Drawbar height-adjustable by 300 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (tire pressure monitoring system with indicator function in the truck via EBS signal—no installation required on the truck side) * LED lighting system * 15-pin electrical connector ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floorboards * Preparation for subsequent installation of 20" container locks at front and rear * Bolted, smooth sheet metal front wall * Side walls made of trapezoidal-profiled steel, foldable with drop-side spring assist * Hot-dip galvanized bolt-on rear stanchions ----Load Securing: Bsdpsndpn Ssfx Ak Ajwr * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing points every 480 mm * Option for 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t securing points ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, stored in a compartment underneath the loading area in the chassis, accessible from the rear ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Entire vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: Bodoxf Skvopfx Ak Ajwr * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power plug * LED tail lights 12/24 V * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required ----General Attachments: * Jost mechanical landing gear at front * 2 mechanical foldable support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted at the front right side of the chassis * Bolted underride guard * Plastic quarter mudguards ----Tipping Platform: * Mesh hooks positioned at the central locking mountings and 2 at the front bulkhead * Steel pallet - 3-way tipper body with reinforced Strong sidewalls (continuous upper sidewalls with internal tube reinforcement – without central stanchions – foldable with sidewall spring lifting device) * Screw-fixed rear stanchions * Combination steel wing doors at rear, 2-leaf, asymmetrically split, can be swung and locked up to 270° (not foldable), with additional swinging frame for automatic tailgate opening during tipping; locking by galvanized rod lock at rear and central lock; deactivation function for automatic tailgate opening during rear tipping with opened wing door * 4 mm fine-grained steel floor plate ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t lashing rings recessed in the outer frame on each side ----Chassis: * Chassis made of fine-grained steel ----Ramps: * Rear mounting track for deployable ramps * 1 pair of aluminium ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps integrated below the loading area in the chassis at the rear ----Tyres: * Tyre size 358/55 R 19.5 ----Painting: * Drawbar, underride guard, rear stanchion, and rear foldable support legs hot-dip galvanized * Axles, springs, air tank, and landing gear painted in black shade * Sidewalls painted in RAL colour of choice (no special or metallic paint) – can be modified up to approx. 6 weeks before completion ----Other Information: * Reinforced body with load securing certificate * Errors and prior sale excepted * Sample images Bsdpox Hm Rcjfx Ak Aewr ----Delivery Time: * Immediately available from calendar week 29/2026

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED rear lights 12/24 V * Tire pressure monitoring system with in-cab display via EBS signal – no truck-side installation required ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted right front of the chassis * Bolted underrun protection * Plastic quarter mudguards ----Tipper Body: * Net hooks mounted at the positions of the central locking as well as 2 pieces on the front wall * Steel pallet 3-way tipper body with reinforced strong side walls (continuous side walls with internal tube reinforcement – without intermediate stakes – drop-down with board wall spring lifter) * Rear uprights bolted * Combination steel swing doors at the rear, two-leaf, asymmetrically split, pivotable and lockable at 270° – not drop-down – with additional pendulum frame for automatic rear wall opening during tipping, locking via galvanized rotary latch at the rear and central locking. Deactivation function for automatic rear wall opening when tipping backwards with open swing door * 4 mm fine-grain steel floor plate ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t lashing rings each side, integrated into the outer frame ----Chassis: * Chassis made from fine-grain steel ----Ramps: * Rear ramp rails for drive-on ramps * 1 pair of aluminium drive-on ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for the ramps integrated into the chassis under the loading bed, accessible from the rear Bedsx Hm Rispfx Ak Aewr ----Tyres: * Tyres 358/55 R 19.5 ----Paintwork: * Drawbar, underrun protection, rear upright, and rear folding supports hot-dip galvanized * Axles, springs, air reservoir, and landing leg painted in black tone * Side walls painted in a RAL colour of your choice (no special or metallic paint) – can be changed up to about 6 weeks before completion ----Information: * Reinforced body with load securing certificate * Errors and prior sale excepted * Sample images ----Delivery time: * Available immediately from CW 29/2026

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist Bjdsrwc R Aepfx Ak Aswr ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem load equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, on the right-hand side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipper Body: * Net hooks at sides and rear in the central locking compartments, as well as 2 units on the front wall * Steel palletized 3-way tipper body (continuous side walls—without central stanchions—foldable with board spring-lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically divided, can be opened and locked at 270°, not foldable—with additional swinging frame for automatic rear tailgate opening during tipping process; locking via galvanized locking rods and central locking * Deactivation function for automatic rear tailgate operation when tipping backwards with open wing door * 4 mm steel chequer plate floor * Rear mounting rail for loading ramps ----Load Securing: * One 5 t lashing ring per corner * Four 3 t lashing rings each side, recessed into the outer frame Bodpsl Thymsfx Ak Aewr ----Ramps: * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment beneath the loading area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall painting in other RAL color shades available for an additional charge * Axles, springs, flange eye, air tanks, and landing gear painted in black ----Information: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle, without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex works Egestorf on the A7 Motorway

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Fittings: * Aluminum air reservoir * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Flatbed: * Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals * Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included * 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included) * 30 mm phenolic plywood floor Bwodpfx Ajx Nlkaok Aor ----Drum Supports: * 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with transverse brace * Maximum drum weight per support 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 centering cones made of polyamide * 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling ----Loading height: * Approx. 1,040 mm when loaded ----Coating: * Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized * Axles painted in a black shade

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ - TA -R 14.4 ----Brakes: Bwjdpfsx Ipapox Ak Ajr * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating aggregate ----Drawbar / Drawbar Eye: * Drawbar adjustable in height by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flanged drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * LED rotating beacon (removable) at rear ----General Attachments: * Support winch in front * Externally mounted hot-dip galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right, outside at the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation in front of front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Sidewalls made of trapezoidal profile steel sheet, foldable with drop-side spring-assisted lifting device * Steel rear wall can be slid between the ramps – storage bracket for unused rear wall inside by the front wall * Rear stanchions bolted * Rear approach angle approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strips on the inside of ramps * 12 mm thick and 210 mm wide rubber strips on the approach slope and externally on the low-bed platform (from front wall to end sill) ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing rings every 600 mm possible * 1 x 6.3 t lashing ring at each front and rear corner * Various drill holes in front wall and end sill for 1.2 t lashing options ----Ramps: * One-piece mech. grating ramps with spring system for one-man operation, approx. 2,750 x 870 mm (can be compressed to 20 mm) ----Paintwork: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air tank, and flanged drawbar eye painted black * Sidewalls painted RAL 9010 pure white ----Info: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery time: Vehicle is immediately available

Stanje: novo, največja dovoljena obremenitev: 6.810 kg, skupna masa: 9.600 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * EK 9.6 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Flange-Type Towing Eye: * Drawbar as central axle drawbar with 40 mm screw-in towing eye * Continuously adjustable drawbar height with spindle lifting mechanism instead of fixed drawbar ----Coupling Height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal - no installation needed on the truck side * 15-pin power socket * LED tail lights * Flashing side marker lights ----General Attachments: * Front support winch * Closed plastic mudguards * Foldable underrun protection for pavers ----Chassis: Bodpfx Akjw Ndr Ue Aswr * Chassis made from fine-grain steel ----Tipper Body: * Pallet - 3-way tipper body * 700 mm steel front wall * Asymmetrical aluminium side walls - continuous without centre stanchion - folding with overtravel catches and swinging via manual central locking * 800 mm high steel tailgate with automatic opening when tipping rearward * 4 mm Hardox 450 steel floor ----Load Securing: * Two pairs of 3 t folding lashing brackets recessed into the steel floor on each side ----Painting: * Chassis, drawbar, underrun protection hot-dip galvanized * Painting of the tipper body in a RAL colour of your choice (no special or metallic paints) can be changed up to approx. 6 weeks prior to completion ----Information: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 42/2026