Fliegl Dhks 390 Sattelauflieger Stahl-Mulde 24,5M³ nakup rabljenega (2.516)

Stanje: rabljeno, prevoženi kilometri: 1 km, prva registracija: 06/1990, Steel rear tipper body, approx. 17 cbm Fpodovbn Hiopfx Ab Ieh EZ assumed

Stanje: rabljeno, prevoženi kilometri: 1 km, prva registracija: 06/1990, prostornina tovornega prostora: 17 m³, dolžina tovornega prostora: 5.200 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.400 mm, Steel rear tipping trough approx. 17 cbm, subframe Fjdpfxovbn Dzj Ab Isph First registration assumed

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 8.900 kg, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.300 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailored Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Lowbed Semi-Trailer Chassis Steel welded construction, fifth wheel plate with replaceable double kingpin and two kingpin positions 24 t two-speed landing gear, single-sided operation, with straight lower part, without compensating device Rear supports foldable 2 wheel chocks with holders Side underrun protection in aluminium Quarter-shell mudguards in front of and behind the axle assembly 1st pair of wheel recesses recessed after the gooseneck in the lowbed platform area, with ramped entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note: Main beam area 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axle A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note: Main beam area 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader types with precise specifications (if the total height is exceeded). Wheel recess covers sliding out from the main frame, with timber inserts. Extendable widening to 3,000 mm (not in rear ramp slope and not in the bottom of the wheel recesses) Storage compartment for timber planks on the gooseneck, positioned transversely at the front Timber planks 70 mm for widening to 3,000 mm Tie-down points lowloader 2 pairs of ring lashing eyes, each 5 t at the front on the gooseneck 11 pairs of lashing mushrooms recessed into the upper and side outer frame, each 10 t 2 x on the gooseneck, 9 x distributed in the low loader bed, first lashing eye 250 mm from the front and the last max. 250 mm from the rear, distance between lashing eyes not exceeding 1100 mm 8 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 t ring lashing eyes recessed in the floor Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Air suspension Wheels and tyres 235 / 75 R 17.5 to manufacturer’s choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front with raise & lower valve Axle load detection via EBS Canbus signal, for display in the driver’s cab, truck must be correspondingly equipped Vehicle Stability Control System Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin fail-safe sockets at the front 1 x LED beacon with holder, switchable via parking light 2 pairs of warning boards, double, LED illuminated and extendable to 3,000 mm, removable with plug Flooring Gooseneck with steel/chequer plate overlay Storage box embedded in the transition slope to the gooseneck After that, with 70 mm softwood flooring; in the bottom of the wheel recesses and wheel arch area steel/chequer plate overlay Lowloader platform including rear ramp slope 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp securing device below Fsdpji Ri Hcjfx Ab Isph Tailored Transport Solution Configure your Fliegl vehicle according to your individual requireme

Stanje: rabljeno, največja dovoljena obremenitev: 30.400 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, prostornina tovornega prostora: 25 m³, Oprema: ABS, * 4956 - ID vozila za telefonska povpraševanja * ABS, SAF osi, kolutne zavore, zračno vzmetenje dviganje + spuščanje, dvižna os, izpustne podpore, zložljiva zaščita proti podletu, rolo ponjava, alu platišča, podest, prekucni sistem * Pnevmatske gume prva os: 385/65R22,5 (4 / 2 mm) * Pnevmatske gume druga os: 385/65R22,5 (2 / 2 mm) * Pnevmatske gume tretja os: 385/65R22,5 (4 / 9 mm) ----naš e-poštni naslov: Fjdpfxjy U S Snj Ab Ieph     naša storitev za vas:       - pridobitev začasnih ali carinskih tablic       - prevoz / dostava po EU       - carinjenje vozil v tretje države Če imate vprašanja v ruščini, lahko pokličete na naslednjo številko * WhatsApp samo za rusko govoreče: * WhatsApp za angleščino, nemščino in druge jezike:

Stanje: novo, največja dovoljena obremenitev: 30.010 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New vehicle: Fliegl 4-axle low-loader trailer with wheel recesses and split ramps, type VTS 400 RM Lease-purchase offer: Term 48 months, down payment only the VAT, residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low-loader First registration: New vehicle Gross weight: 24,000 kg / 40,000 kg Unladen weight: 9,990 kg Payload: 14,010 kg / 30,010 kg Overall length: 12,000 mm Loading length: total approx. 10,000 mm, gooseneck approx. 2,850 mm, load area including rear bevel approx. 7,150 mm Width: 2,550 mm Loading height: 900 mm Further information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports Wheel chocks with holders Aluminum side underrun protection Rear spray flap across the entire width Half-shell mudguards on 1st and 2nd axle with anti-spray flaps behind each axle, anti-spray flap behind 4th axle Excavator arm recess above the rear axles, extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, and approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator arm recess, lateral on the main frame approx. 300 mm from the front and approx. 200 mm before the rear bevel Spare wheel carrier for 1 spare wheel, upright on the gooseneck right at the front. Spare wheel, make identical to the main tires, steel rim Storage box recessed in the gooseneck floor with lid; dimensions W = 720 mm / L = 520 mm / D = 170 mm 1st pair of wheel recesses after the gooseneck, recessed in the low-bed lane area, ramped for entry, bottom length approx. 1,600 mm, depth approx. 400 mm. Note: Frame in the main beam area is 400 mm higher than the wheel recess 2nd pair of wheel recesses between the axles, recessed in the low-bed lane area, ramped for entry, bottom length approx. 600 mm, depth approx. 300 mm. Note: Frame in the main beam area is 300 mm higher than the wheel recess Extendable width up to 3,000 mm (not extendable in the rear bevel and not in the lower wheel recesses) (track width of the construction equipment or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden planks below the low-bed area 70 mm wooden planks for extension to 3,000 mm Lashing eyes on the low-loader 1 pair of lashing eyes, recessed in the front of the gooseneck, 5 t each 4 pairs of lashing holes in the outer frame, 5 t each (for lashing straps) 8 pairs of lashing rings, integrated on top and side of outer frame, 10 t each Fpedpfstrizkjx Ab Ijh 2 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets integrated in the outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 1 pair of folding lashing eyes, additionally recessed in the floor, 10 t each 1 inside next to the main frame at the start of the low bed 2 pairs of additional folding lashing eyes, 10 t each 1 on the gooseneck (protrudes over edge) 1 behind last axle, recessed in floor Drawbar coupling / turntable trailer hitch Towing bar with certified 50 mm towing eye, towing eye inclined 8° D-value at least 160 kN Axles & suspension BPW drum brake axles "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical front axle load equalization (rocker balance) Wheels and tires 235 / 75 R 17.5" Manufacturer's choi

Stanje: novo, največja dovoljena obremenitev: 30.310 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Gross weight: 40,000 kg Payload: 30,310 kg Unladen weight: 9,690 kg Overall length: 12,000 mm Loading length: 10,000 mm Loading bed: 7,150 mm including 850 mm drive-on slope Loading height: 900 mm 1st pair of wheel recesses after drop in the loading bed, length at bottom approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the loading bed, length at bottom 600 mm, 300 mm deep Extensions to 3,000 mm, warning boards, rotating beacon, comprehensive lashing package 5 pairs of stake pockets in the outer frame Excavator arm recess, 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with raise/lower valve, separately operable Fpsdpfx Ajnzlg Deb Ijh BPW drum brakes Tyres: 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Ramps: 2,800 mm x 750 mm, hydraulically operated Hydraulic lateral displacement Hire purchase offer: term 48 months, residual value 40%, down payment only the VAT on the installments, monthly payment EUR 970.00 net Vehicle available from 11.09.2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121, right next to the main entrance. Further 3-, 4- and 5-axle low loaders new and used available immediately

Stanje: rabljeno, največja dovoljena obremenitev: 27.290 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2020, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.853 mm, Oprema: ABS, SDS390 101m³ X-TRA Long Moving Floor SAF Lift Axle * German Semitrailer * 101m³ X-TRA Long Model * SAF axles * Lift axle * Disc brakes * Floor: moving floor with wear plate at the rear made from V2A stainless steel, floor planks made from aluminium, 8 mm floor profile, ribbed design, end caps in aluminium * Tires: 385/55 R 22.5 — 1st axle 9/9 mm, 2nd axle 12/10 mm, 3rd axle 11/9 mm * Empty weight: 7,710 kg * Permissible total weight: 35,000 kg Fedpsrwvl Tjfx Ab Isph * Payload: 27,290 kg * Air suspension * All information subject to change * Further details and criteria on request Additional Service Offerings * Repainting and retrofitting possible * Short-term and export license plates available * Transfer and shipping possible * Assistance with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing available: We cooperate with several leasing companies and can offer every customer the best fitting financing solution. We also often support customers with a weaker credit rating and can connect you with strong leasing partners. * In-house workshop Languages spoken: Polish, English, Russian. Repainting in your desired color is available at our facility with high quality and at a competitive price. Unable to visit and inspect the truck in person? No problem—feel free to appoint an independent surveyor of your choice to perform a technical and visual inspection. Should any defects be found, we can remedy them promptly and professionally in our workshop. Additionally, we offer Europe-wide delivery of your new used truck for an extra fee.

Stanje: rabljeno, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2019, Besuchen Sie unsere Webseite, wo Sie unseren kompletten Fahrzeugbestand mit vielen weiteren Fotos und Informationen in mehreren Sprachen finden. SEL 8332 Fliegl ASS 372 Schwergut Thermomulde mit Abschiebetechnik deutsche Zulassung / 1. Hand Erstzulassung: 21.03.2019 Technisch zulässiges Gesamtgewicht (kg): 40.000 Zulässiges Gesamtgewicht (kg): 40.000 Leergewicht (kg): 8.160 FIN: WGJ133404KM800184 Hauptuntersuchung (HU): 03.2026 BEREIFUNG UND ACHSEN: Bereifung: 385/65 R 22,5 Achs-Konfiguration: 3 BPW-Achsen 1. Achse: Liftachse Luftfederung Scheibenbremsen Aluminiumfelgen WEITERE AUSSTATTUNG: Thermomulde mit Abschiebetechnik FAHRZEUGDOKUMENTE: Fahrzeugschein Fahrzeugbrief COC-Papiere Fpodpex Ep Ibjfx Ab Ioh M. BUFANO (Italienisch, Englisch, Deutsch) J. CORDEIRO (Portugiesisch, Spanisch, Italienisch, Englisch) J. MARJANOVIC (Deutsch, Bosnisch) L. OBODYNSKA (Ukrainisch, Russisch) Wir sprechen: DEUTSCH, ENGLISCH, ITALIENISCH, SPANISCH, PORTUGIESISCH, UKRAINISCH, RUSSISCH, POLNISCH, BOSNISCH Obwohl alle Anstrengungen unternommen wurden, um die Richtigkeit der Angaben zu gewährleisten, können wir keine Gewähr für etwaige Fehler oder Auslassungen übernehmen. Bitte prüfen Sie die bereitgestellten Fotos. Die angegebenen Maße sind Circa-Angaben. Unsere Fahrzeuge werden im IST-Zustand verkauft. Wir laden unsere Kunden herzlich ein, unser Unternehmen zu besuchen und den Zustand der Fahrzeuge persönlich zu begutachten. Zudem bieten wir die Möglichkeit zu einer Probefahrt. Es ist zu beachten, dass die mit dem Fahrzeug gelieferten Batterien die aktuell installierten sind. Sollten Sie neue Batterien wünschen, kontaktieren Sie uns bitte für Preisinformationen.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2015, prostornina tovornega prostora: 55 m³, skupna dolžina: 10.800 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, barva: rdeča, Leto izdelave: 2015, Oprema: ABS, = Additional Options and Accessories = - Electronic Brake System (EBS) - Toolbox - Central lubrication system = Notes = Fliegl tipping trailer 55 cubic meters 3 axles Aluminum body Lifting axle Fpedpeyuyrzefx Ab Ioh Air suspension SAF axles ABS ZSA Roll tarp Platform Combination tailgate Grain discharge chute Tires 60% tread GR 385/65R 22.5 IDNR 362 We look forward to welcoming you for consultation, contract signing, or vehicle pickup at our dealership. Please schedule an appointment. If you are unable to visit our dealership in person, we also offer complete transaction processing via phone/email/WhatsApp/fax. Upon request, we can deliver your new vehicle directly to your door. This means you get the best price, maximum security, and convenience when buying a vehicle. Trade-in We are happy to accept your used vehicle in part exchange. We offer you the option of a digital vehicle evaluation based on your photos without the need to visit the dealership. Our specialized purchasing team guarantees you the highest price. Upon request, we can deliver your new "pre-owned" vehicle throughout Germany directly to your doorstep and pick up your trade-in in return. Financing - Leasing Instant approval and settlement of existing loans. Your specialist partner for passenger cars, vans, commercial vehicles and construction machinery ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial Area) Visit us on our website Over 400 vehicles in stock at all times The details provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment needs to be checked separately if required. The offer generally does not include a new TÜV inspection; we will gladly provide an offer for this from our partner workshop. Subject to error and prior sale. Show less = Further information = Unladen weight: 6,060 kg Payload: 31,940 kg gross vehicle weight: 38,000 kg Body make: Fliegl Tipper direction: Rear Sales price: €17,999, US$20,900

Stanje: novo, številka stroja/vozila: 195f80ad09517628522e33a91, lastna masa: 7.300 kg, največja dovoljena obremenitev: 16.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Fpsdpfx Aji Ri Rvsb Ieh Rear mudflaps across the entire width Quarter shell fenders in front of 1st axle 1st pair of wheel recesses embedded after the kink in the loading bed area, ramped entry, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the loading bed area, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The frame in the main beam area is 300 mm higher than the wheel recess. Sliding extensions for widening, extendable to 3,000 mm (not in tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Sliding extensions for widening, extendable to 3,000 mm, also at the bottom in the wheel recesses, foldable at the wheel recess extensions (extension not in the tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) 70 mm timber planks for extension to 3,000 mm Tie-down points on low loader 1 pair of lashing cutouts embedded in the longitudinal beam at the front in the kink, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for attaching tie-down straps) 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated at 10 t 1x at the front in the kink 6x in the loading bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points no greater than 1,100 mm Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles & suspension SAF drum brake axles Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-applied parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, LED side marker lights, 2 white position lights at the front 2 white/red lane guidance lights at the rear 2 x 7-pin fail-safe connectors at the front, with connection cable, 1 LED rotating beacon with holder, switched via side light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Front kink with steel/checkered plate covering Storage box embedded in the ramp to the kink, then with 70 mm softwood floor, in the wheel arch area with steel/checkered plate covering Tail ramp with 70 mm softwood floor Low loading area including tail ramp: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring assist Operating Instructions For 10,000 kg axle load an exemption is required, only indivisible loads allowed! The stated gross weight is technically possible, but depending on the type of load, the gross weight may not be achievable within the pe

Stanje: novo, številka stroja/vozila: ede0610378cbe39cc4883251d, lastna masa: 24.000 kg, največja dovoljena obremenitev: 7.550 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Trailer Steel welded construction 1st pair of wheel recesses embedded in the driving lane area after the steel platform, bevelled for entry, approx. 1,400 mm long at the bottom, approx. 400 mm deep. Note! Frame is 400 mm higher in the main beam area than at the wheel recess. If machines are to be transported where overall height must be verified, we request a technical data sheet for the machine types with precise specifications (if overall height is exceeded -> customer is responsible, approval required). Depending on ground clearance under the machines, inserts for the wheel recesses may be required on the customer side. Turntable with robust ball race ring, storage box integrated in the turntable front section Rear supports foldable 2 wheel chocks with holder Aluminium side underrun protection Full-width rear mudflap Extending wideners to 3,000 mm (not in rear bevel area) (The track width of the construction machines or vehicles to be transported must not exceed the outside frame width of 2,550 mm) Central storage compartment for wooden planks on loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes low-loader 3 pairs of 10 t lashing points integrated in the floor at the front incl. 6 pairs of lashing mushrooms recessed on top and at the side in the outer frame, each 10 t 1 x at the gooseneck The remaining distributed between, spacing not greater than 1,200 mm 1 x rear bevel 5 pairs of stake pockets integrated into the outer frame, internal 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly trailer turntable Drawbar with tested 40 mm towing eye Axles & Suspension SAF drum-braked axles Axles/chassis laser aligned to reduce tyre and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings Brake system 2-line compressed air brake system Colour-coded piping for easy service Spring loaded parking brake 2 interchange-proof coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS plug at the front, with connection cable Note: The trailer may only be towed by tractor units which ensure the functionality of ABS! Wheels and tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims in twin arrangement, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED illumination Fedei Ri Ryjpfx Ab Ioph 2 white position lights at front 2 white/red track marker lights at rear 2 x 7-pin interchange-proof plugs at front with connecting cable 1 LED beacon with bracket, switched via parking light (removable lamp) 2 pairs of double warning boards, LED-lit and extendable up to 3,000 mm Floor Front area steel floor, incl. Then with 70 mm softwood floor, in wheel arch area steel/chequer plate covering Rear bevel with 70 mm softwood floor Low-loader deck incl. rear bevel 8,200 mm Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring lifting aid Operating instructions For 10,000 kg axle load, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be achievable while complying with permissible axle/kingpin/saddle loads. (Poor driving and tracking behaviour possible due to incorrect load distribution) Country of registration / Plates Country of registration: Germany incl. With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for two-line number pla

Stanje: novo, številka stroja/vozila: 3c70e9a5d82cfb3ada79baf95, lastna masa: 8 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 26 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 205 / 65 r 17,5, Further Information Chassis: Semitrailer Logistics Fine-grained steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, rear bevel approx. 1920 mm, continuous ramp hanging bar at the rear and at the front of the gooseneck, ground rollers at the rear, lowered deck (deep bed) after the step-down up to the axle assembly. Drawing release from the customer required upon order! Pair of lashing mushroom pins recessed on top and side in the outer frame, each rated for 10t Pair of lashing eyes recessed in the outer frame on the gooseneck, each rated for 5t 24t two-speed landing gear, single-sided operation, with straight lower part, without compensating plate Foldable rear support, mounted externally Wheel chocks with holder Side underrun protection – aluminum Rear underrun protection – steel, for EU, where technically possible Quarter-shell mudguards With anti-spray mudflaps according to EU regulations 1 pair of wheel recesses recessed after the gooseneck in the deep-bed lane area, sloped for easier entry. Bottom length approx. 1840 mm, recess depth approx. 200 mm. Second pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than the wheel recess. Detailed technical inspection required upon order. Removable wheel recess covers from the deep bed with hardwood inlays, at rear bevel with hardwood inlays. Electric cable winch, 24 volts, pulling force 5500 kg, mounted in the gooseneck step-down, does not reach into load area, operated by remote control, cable length 35 m × approx. 10 mm, with roller fairlead and detachable guide roller at the rear bevel. Axles & Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto-reset function Wheels and Tires 205/65 R 17.5 tires with 129/127K (132/132G) rating for 8t tire load capacity at max. 90 km/h, preference of manufacturer Steel twin wheels, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 interchangeable coupling heads at front, without connecting line EBS by Haldex, electronic braking system with EBS socket at front, without connecting cable (brake calculation sent to customer for approval, 15.07.2021) Attention: The trailer may only be towed by tractor units that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, display in the driver’s cab possible (truck must be properly prepared, not installed, not a calibrated scale) Electrics 24 volts multi-chamber rear lights, lateral yellow LED lights 2 white position lights at front 2 white/red outline marker lights at rear 2 × 7-pin and 1 × 15-pin interchangeable sockets at front, without connecting cable Floor Gooseneck with steel/checker plate covering Fpodpfx Aoi Ri Hrob Ieh 30 mm phenolic resin plywood floor, in deep bed between main rails In the drive lane area with serrated grating, in wheel recesses with steel/checker plate covering Ramps Pair of aluminum ramps, 3,200 mm long, load capacity 12,000 kg per pair Pair of steel ramps for entry into deep bed Pair of steel ramps for crossing gooseneck Sidewalls Approval / Signage Registration country: Germany With DEKRA inspection and certificate (according to §13 EC-FGV) Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, yellow at sides and red at rear Warning plate as per ECE-70 Paintwork Frame painted RAL 9018 Papyrus White Support feet coated black Attention: Archive ima

Stanje: novo, lastna masa: 6.111 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, naslednji pregled (TÜV): 05/2026, prostornina tovornega prostora: 25 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, Oprema: ABS, Kögel 3-osna jeklena prekucna prikolica | Drsna ponjava | 25m³, jeklena prekucna prikolica | SAF osi z kolutnimi zavorami | 1. os dvižna | Pnevmatike: 385/65 R22.5 | Pridržujemo si pravico do napak, vnosnih napak in vmesne prodaje. Fpodoyhmfnjpfx Ab Ioh

Stanje: rabljeno, največja dovoljena obremenitev: 23.950 kg, skupna masa: 31.500 kg, konfiguracija osi: 3 osi, prva registracija: 07/1988, prostornina tovornega prostora: 55 m³, Leto izdelave: 1988, Oprema: ABS, Schwarzmüller 3-osni kiper z dvižno osjo, aluminijasta korita 45m³, jeklen okvir s dodatnimi stranicami 55m³ Stanje: zelo dobro Fodpfx Abex Sbu Te Isph Pnevmatike: 40-95%

Stanje: rabljeno, lastna masa: 6.250 kg, največja dovoljena obremenitev: 29.750 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2022, prostornina tovornega prostora: 24 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, registracija tovornjaka, | Kögel SKM24 jekleni prekucnik 24m³ | SAF osi z disk zavorami | zunanja loputa | rolo ponjava | 1. os dvižna | Pnevmatske gume: 385/65 R22,5 | Dno iz 5 mm HB 450 | Loputa iz 4 mm HB 450 | Stranska stena iz jeklene pločevine S700, debeline 4 mm | Pridržujemo si pravico do napak, sprememb in predhodne prodaje. Fjdpfxjzbbb Re Ab Isph

Stanje: rabljeno, največja dovoljena obremenitev: 31.550 kg, skupna masa: 36.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2016, naslednji pregled (TÜV): 06/2026, Lastna teža 5450 kg Zračno vzmetenje Dvižna os BPW osi z bobnastimi zavorami ABS Fedpfx Ajyg Uwvsb Ijph Preklopna zaščita proti podletu Električna ponjava

Stanje: rabljeno, skupna masa: 33.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2004, dolžina tovornega prostora: 7.450 mm, širina tovornega prostora: 2.315 mm, višina nakladalnega prostora: 1.400 mm, prostornina tovornega prostora: 24 m³, Oprema: ABS, Vehicle identification number: VAVSAK2354H194826 ALU TIPPER BODY - STEEL FRAME German MOT (HU) due Unladen weight: 5,350 kg Tipper body dimensions: 7,450 x 2,315 x 1,400 mm Volume: approx. 24 m³ Chute Adjustable support legs with crank BPW axles with drum brakes Air suspension External pendulum tailgate Adjustable underrun protection Fpedpfxszcifmo Ab Ioh Tyres: 385/65 R 22.5 Modifications, prior sale, and errors excepted. The description serves for general identification of the vehicle and does not constitute a guarantee within the meaning of sales law. The details in the purchase contract are binding. Our offer is generally without new TÜV inspection. Should you require a new TÜV inspection, we are happy to provide an offer from our partner workshops! The vehicle may carry advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2015, Oprema: ABS, Identifikacijski broj vozila: WKY3S2139FM031101 Fedpfoyul Riox Ab Ijph NESREĆA, ČELIČNA KIPA ZA OTPAD – Čelični okvir – Čelična kipa Tehnički pregled (Nemačka) do 07/2026 – Bezbednosna provera potrebna Sopstvena težina: 7.560 kg Dimenzije kipera: 10.700 / 10.000 x 2.330 x 2.250 mm – Zapremina: oko 54 m³ BPW Eco Plus osovine sa doboš kočnicama Aluminijumske teleskopske noge Portalna vrata Oštećena pokretna cerada Platforma Podesiva zaštita od podletanja Kutija za alat Pneumatici: 385/65 R 22,5 Aluminijumski točkovi Izmene, međuprodaja i greške su izričito zadržane. Opis služi za opštu identifikaciju vozila i ne predstavlja garanciju u smislu zakona o kupovini. Relevantan je opis prema kupoprodajnom ugovoru. Naša ponuda je uvek bez novog tehničkog pregleda (TÜV). Ukoliko je potreban novi tehnički pregled, rado ćemo Vam dati ponudu naših partnerskih servisa! Vozilo može biti oblepljeno ili obeleženo reklamom. Važe naši opšti uslovi isporuke i plaćanja.

Stanje: rabljeno, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2004, Oprema: ABS, Vehicle ID number: W091103344PC09224 CHKS/HH - FRAME STEEL - BODY ALUMINIUM DE HU 05.2026 – Safety inspection due Unladen weight: 5,650 kg Body dimensions: 7,500 / 7,000 x 2,370 x 1,400 mm Capacity: approx. 24 m³ BPW axles with disc brakes LIFT AXLE WITHOUT drop-down support legs Platform Chute, sliding tarpaulin Swivel tailgate inside with slider Fpjdpfx Aexmn T Njb Ish Adjustable underrun protection Tyres: 385/65 R 22.5 Changes, prior sale and errors are expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense of sale. The description according to the purchase contract shall be decisive. Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops! The vehicle may be covered with advertising stickers and/or lettering. Our general terms of delivery and payment apply.

Stanje: rabljeno, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/1999, Oprema: ABS, Vehicle Identification No.: W09110234XWC09032 with STEEL FLOOR and BODY HEATING German MOT (HU) due Unladen weight: 5,920 kg Body dimensions: 7,500 / 7,050 x 2,300 x 1,500 mm Volume: approx. 23 m³ Fpjdpfewnvgiox Ab Ioh Kingpin: 3.5 inch BPW axles with drum brakes Support legs retractable by crank External pendulum tailgate with hydraulic locking and chute Rear under-run protection MISSING Tyres: 445/65 R 22.5 Specifications, interim sale, and errors are subject to change without notice. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense of sale of goods. The only binding description is the one stated in the purchase contract. Our offer does not include a new roadworthiness inspection (TÜV) by default. If a new TÜV inspection is required, we will gladly obtain an offer from our partner workshops! The vehicle may have advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 32.750 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2017, Leto izdelave: 2017, Oprema: ABS, Fahrzeug-Ident-Nr.: VAVKSK339HZ391656 samodejna ponjava - Marcolin z daljinskim upravljanjem nemški tehnični pregled zapade lastna masa: 6.250 kg Fpjdpfx Abswibfyo Ieh dimenzije korita: 7.600 x 2.330 x 1.650 mm prostornina: cca. 28 m³ BPW Eco Plus osi z BOBNENIMI ZAVORAMI DVIŽNA OS zložljive podporne noge nihajna loputa zunaj nastavljiva zaščita proti podletu pnevmatike: 385/65 R 22,5 Spremembe, vmesna prodaja in napake so izrecno pridržane. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v smislu prava prodaje. Merodajen je opis po kupoprodajni pogodbi. Naša ponudba je načeloma brez novega pregleda TÜV. V primeru želje po novem TÜV pregledu vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko opremljeno z reklamami in/ali napisi. Veljajo naši splošni pogoji prodaje in plačila.

Stanje: rabljeno, največja dovoljena obremenitev: 25.550 kg, skupna masa: 31.500 kg, konfiguracija osi: 2 osi, prva registracija: 04/1992, Oprema: ABS, Vehicle identification number: 8153215940 ALUMINIUM BODY - STEEL FRAME German roadworthiness test (HU) due Unladen weight: 5,950 kg Kingpin: 3.5 inch Fpodot T Iaispfx Ab Ijh Body dimensions: 7,500 x 2,300 x 1,300 mm Volume: approx. 22 m³ Chute BPW axles with drum brakes Air suspension Externally mounted pendulum flap WITHOUT underride guard Tyres: 385/65 R 22.5 Modifications, prior sale and errors excepted. The description serves solely for general identification of the vehicle and does not constitute a warranty in the legal sense of purchase law. The description as stated in the purchase contract is binding. Our offer is generally without a new technical inspection (TÜV). If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops! Vehicle may have advertising stickers and/or decals. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 30.580 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, prostornina tovornega prostora: 33 m³, Oprema: ABS, Langendorf Kiper SKA Okvir: jeklo Korito: aluminij Nosilnost prostora: 33 m³ Fpjdpfoyqdkysx Ab Ieh 3 osi, SAF osi, kolutne zavore, zračno vzmetenje z eno dvižno osjo, stojišče, rolo ponjava, žitni izpust, aluminijasta platišča, ABS. Nosilnost: 30.580 kg Lastna teža: 5.420 kg

Stanje: rabljeno, največja dovoljena obremenitev: 28.850 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2015, dolžina tovornega prostora: 6.834 mm, širina tovornega prostora: 2.333 mm, višina nakladalnega prostora: 1.641 mm, prostornina tovornega prostora: 26 m³, skupna širina: 2.550 mm, skupna višina: 3.360 mm, Oprema: ABS, Reisch RHKS 35/24 SSL steel tipping body, segment trough, 26m³, lift axle Marcolin tarpaulin system – electronic PVC tarpaulin ---->---- Steel tipping body, Gross vehicle weight rating (GVWR): 35,000 kg, Unladen weight: 6,150 kg, Payload: 28,850 kg, Capacity: approx. 26 m³, Analog axle load gauges, Electronic PVC tarpaulin system, Marcolin tarpaulin, 1st axle liftable, Fsdpfx Aoywc Avjb Ieph automatic lowering function, SAF axles, air suspension, disc brakes, 1x rear LED work light, rear folding underrun protection, 2x drop-down supports, shovel and broom holder, 1x left-hand ladder, 1x additional ladder, pendulum tailgate, internally mechanically locked (2-hook locking system), mudguards on all wheels, air line coupling heads (red + yellow), 2x 7-pin electrical sockets, 1x 15-pin electrical socket, ABS, Loading platform dimensions (L x W x H): 6,834 x 2,333 x 1,641 mm, Loading height: approx. 2,941 mm, Overall dimensions (L x W x H): 8,800 x 2,550 x 3,360 mm, Wheelbase: 3,550 x 1,300 x 1,300 mm, Tyres: 385/65R22.5 on steel rims, Tread depth right front: 9 mm, Tread depth right centre: 11 mm, Tread depth right rear: 12 mm, Tread depth left front: 10 mm, Tread depth left centre: 15 mm, Tread depth left rear: 12 mm

Stanje: rabljeno, največja dovoljena obremenitev: 28.850 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2015, dolžina tovornega prostora: 6.834 mm, širina tovornega prostora: 2.333 mm, višina nakladalnega prostora: 1.641 mm, prostornina tovornega prostora: 26 m³, skupna širina: 2.550 mm, skupna višina: 3.360 mm, Oprema: ABS, Reisch RHKS 35/24 SSL Steel Tipper Body Segment Trough 26m³ with Lift Axle Marcolin Cover Electronic PVC Tarpaulin Cover ---->---- Steel tipping body, Permissible gross weight: 35,000 kg Empty weight: 6,150 kg Payload: 28,850 kg Volume: approx. 26 m³ Analog axle load gauges Electronic tarpaulin cover, PVC version Marcolin cover 1st axle liftable Automatic lowering system SAF axles Air suspension Disc brakes 1x LED work light, rear Rear underrun protection, foldable 2x landing legs Shovel and broom holder 1x ladder on the left 1x additional ladder Pendulum tailgate, mechanically locked on the inside (2-hook locking system) Mudguards on all wheels Air supply coupling head (red + yellow) 2x 7-pin connector 1x 15-pin connector ABS Load area dimensions (LxWxH): 6,834 x 2,333 x 1,641 mm Loading height: approx. 2,941 mm External dimensions (LxWxH): 8,800 x 2,550 x 3,360 mm Wheelbase: 3,550 x 1,300 x 1,300 mm Tyres: 385/65R22.5 on steel rims Tread depth, right front tire: 12 mm Tread depth, right center: 13 mm Tread depth, right rear: 11 mm Tread depth, left front: 12 mm Fpodpfsywc A Aex Ab Ish Tread depth, left center: 6 mm Tread depth, left rear: 12 mm