Faymonville F-S42-111A Semi Dieplader/Tieflader/Lowloader nakup rabljenega (33.111)

Stanje: rabljeno, barva: zelen, Leto izdelave: 2015, Faymonville F-S44-1ACA. Letnik: 2015. 10-tonske osi SAF. Teža: 22.250 kg. Nosilnost: 57.750 kg. Maksimalna teža: 80.000 kg. Nosilnost pete: 40.000 kg. EBS ABS ALB. Hidravlični sistem, priključen na tovornjak (NATO). Aluminijaste plošče na prikolici z žabjim vratom. Hidravlično odstranljiva prikolica z žabjim vratom. Zračna vzmet. 5 metrov raztegljiva. Daljinski upravljalnik. Položna površina za bager: 5600 mm x 950 mm. Pnevmatike: 235/75R17,5, 80 %. Dimenzije: Žabji vrat: D: 4900 mm. Š: 2500 mm. V: 1800 mm. Višina pete: 1300 mm. Osnovna ploščad: D: 8000 mm. Š: 2750 mm. V: 500 mm. Debelina tal: 300 mm. Zadnji del prikolice: D: 5600 mm. Š: 2750 mm. V: 1050 mm. Prikolica D-2. Letnik: 2015. 10-tonske osi SAF. Teža: 3650 kg. Maksimalna teža: 36.100 kg. Nosilnost pete: 16.100 kg. Zračna vzmet. Pnevmatike: 235/75R17,5, 70 %. Nemška prikolica! Na voljo 4 kosi! ID št.: 427. Splošni pogoji poslovanja družbe Heinhuis veljajo za vsa oglaševanja, ponudbe in cenitve družbe Heinhuis, za vsa sklenjena sporazuma s strani družbe Heinhuis ter za pogajanja, ki jim sledijo. S kakršnim koli odgovorom se strinjate z veljavnostjo splošnih pogojev poslovanja družbe Heinhuis in potrjujete, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne neto cene. = Več informacij = Letnik: 2015 Lastna teža: 22.250 kg Nosilnost: 57.750 kg Maksimalna dovoljena teža: 80.000 kg Fsdpfx Ajznau Ujlyjgf Raztegljiva nadstavba: Da = Podatki o podjetju = Za več informacij:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2016, Faymonville F-S43-1EJB. Leto: 2016. 9-tonske osi BPW. Maksimalna teža: 45.000 kg. Nosilnost čepa: 18.000 kg. EBS ABS ALB. Hidravlični sistem, primeren za standard NATO. Hidravlično vzmetenje. 9500 mm. Fgedpfx Aljzmt Eweyof Pnevmatike: 385/65R22,5, 80-odstotna obraba. Številka ID: 521. Splošni pogoji poslovanja družbe Heinhuis veljajo za vse oglase, ponudbe in cenitve družbe Heinhuis, za vse pogodbe, ki jih sklene družba Heinhuis, ter za pogovore, ki jim predhodijo. S kakršnim koli odgovorom se strinjate z veljavnostjo splošnih pogojev poslovanja družbe Heinhuis in potrđujete, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne neto cene. = Dodatne informacije = Leto izdelave: 2016 GVW: 45.000 kg = Informacije o podjetju = Za več informacij:

Stanje: rabljeno, barva: črn, Leto izdelave: 2017, Faymonville F-S43-1AAF. Letnik: 2017. Fedpfx Ajza D Ahjlyjgf 9 ton SAF osi. Maksimalna teža: 45.000 kg. Nosilnost priključnega člena: 18.000 kg. Raztegljivost: 7,3 metra. Hidravlično servo krmiljenje, 3 krmiljene osi. Zračna vzmetitev. Daljinski upravljalnik. Priprava za pritrditev kontejnerjev. Dimenzije platforme: D: 13.600 mm. Š: 2550 mm. V: 1350 mm. Višina priključnega člena: 1200 mm. Pnevmatike: 385/65R22,5, 80 %. ID št.: 672. Splošni pogoji poslovanja družbe Heinhuis veljajo za vsa oglaševanja, ponudbe in cenitve družbe Heinhuis, za vsa sklenjena sporazuma s strani družbe Heinhuis in za pogajanja, ki jim sledijo. S kakršnim koli obliko odziva potrdite veljavnost splošnih pogojev poslovanja družbe Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne neto cene. = Dodatne informacije = Letnik: 2017 Maks. dovoljena masa: 45.000 kg Raztegljiva nadstavba: Da = Podatki o podjetju = Za več informacij:

Stanje: rabljeno, barva: modra, Leto izdelave: 2016, Faymonville F-S43-1ABA. Letnik: 2016. 10-tonske osi SAF. Maksimalna teža: 42.000 kg. Nosilnost vlečnega čepa: 18.000 kg. Servo volan na 3 krmilnih osi. Zračna vzmetitev. Fjdpfxoza Afbe Alyjgf Vitli. EBS ABS ALB. Hidravlični sistem, ki deluje na elektriko Duplo. Hidravlični most, ki se spušča od tal do prikolice. Dolžina: 3000 mm. Centralni sistem za mazanje. 2 hidravlična podstavka na zadnji strani. 2-smerne hidravlične rampe: - hidravlična nastavitev od leve proti desni. - dolžina: 2800 + 1700 mm. Dimenzije: Prikolica: D: 3800 mm. Š: 2480 mm. V: 1400 mm. Nosilnost vlečnega čepa: 1150 mm. Platforma: D: 9600 mm. Š: 2550 mm. V: 900 mm. Pnevmatike: 235/75R17,5, 70 %. Nemška prikolica! ID št.: 449. Splošni pogoji poslovanja družbe Heinhuis veljajo za vse oglase, ponudbe in cenitve družbe Heinhuis, vse pogodbe, sklenjene s strani družbe Heinhuis, in pogajanja, ki jim predhodijo. S kakršnim koli odgovorom potrdite veljavnost splošnih pogojev poslovanja družbe Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji. Naše cene so izvozne neto cene. = Več informacij = Letnik: 2016 MVT: 42.000 kg = Podatki o podjetju = Za več informacij:

Stanje: rabljeno, barva: zelen, Leto izdelave: 2015, Faymonville F-S44-1ACA. Letnik: 2015. 10-tonske osi SAF. Teža: 22.250 kg. Nosilnost: 57.750 kg. Maksimalna teža: 80.000 kg. Obremenitev pete: 40.000 kg. Sistem EBS ABS ALB. Hidravlični sistem, priključen na tovornjak (NATO). Aluminijaste deske na prikolici z gooseneck prikolico. Hidravlično snemljiva gooseneck prikolica. Zračno vzmetenje. 5 metrov podaljšljiva. Daljinski upravljalnik. Ploščad za bager: 5600 mm x 950 mm. Pnevmatike: 235/75R17,5, 80 %. Dimenzije: Priklopna prikolica: D: 4900 mm. Š: 2500 mm. V: 1800 mm. Višina pete: 1300 mm. Osnovna plošča: D: 8000 mm. Š: 2750 mm. V: 500 mm. Debelina osnovne plošče: 300 mm. Zadnji del prikolice: D: 5600 mm. Š: 2750 mm. V: 1050 mm. Podvozek D-2. Letnik: 2015. 10-tonske osi SAF. Teža: 3650 kg. Maksimalna teža: 36.100 kg. Obremenitev pete: 16.100 kg. Zračno vzmetenje. Fgodpfx Alsy S Sk Ssyef Pnevmatike: 235/75R17,5, 70 %. Nemška prikolica! Na voljo 4 kosi! Številka: 552. Na vsa oglaševanja, ponudbe in cenitve podjetja Heinhuis, vse pogodbe, sklenjene s podjetjem Heinhuis, in pogajanja, ki jim predhodijo, se uporabljajo splošni pogoji podjetja Heinhuis. S kakršnim koli odgovorom potrdite veljavnost splošnih pogojev podjetja Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji. Naše cene so izvozne neto cene. = Dodatne informacije = Letnik: 2015 Lastna teža: 22.250 kg Nosilnost: 57.750 kg Dovoljena skupna masa: 80.000 kg Podaljšljiva nadstavba: Da Cena: Na povpraševanje = Informacije o podjetju = Za več informacij:

Stanje: rabljeno, barva: črn, Leto izdelave: 2019, Faymonville F-S43-1AAF. Letnik: 2019. 9 ton SAF osi. Največja dovoljena masa: 45.000 kg. Obremenitev pete sklopke: 18.000 kg. 7,4 metra, možnost podaljšanja. Servo volan, 3 vodene osi. Zračna vzmetitev. Hidravlični sistem, deluje na elektriko (NATO standard). ABS EBS ALB. Dimenzije ploščadi: D: 13.550 mm. Š: 2500 mm. Fgjdpfxjzl Efao Alyof V: 1450 mm. V: Aluminijaste strani: 600 mm. Višina pete sklopke: 1250 mm. Pnevmatike: 385/65R22,5, 70 % preostale življenjske dobe. ID št.: 489. Splošni pogoji poslovanja družbe Heinhuis veljajo za vse oglase, ponudbe in cenitve družbe Heinhuis, za vsa sklenjena sporazuma s strani družbe Heinhuis in za pogajanja, ki predhodijo tem sporazumom. S kakršnim koli oblikom odziva se strinjate z veljavnostjo splošnih pogojev poslovanja družbe Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne neto cene. = Dodatne informacije = Letnik: 2019 ZGV: 44.999 kg Cena: Na zahtevo = Informacije o podjetju = Za več informacij:

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2012, skupna dolžina: 13.700 mm, skupna širina: 2.550 mm, skupna višina: 3.300 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2012, Oprema: ABS, = Additional Options and Accessories = - Drum brakes = Remarks = Chassis Diameter of kingpin / fifth wheel: 2 inch Height of kingpin / drawbar: 120 cm Drum brake: ✓ Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Length over axles: 900 cm Platform length: 900 cm Gooseneck length: 360 cm Maximum width: 290 cm (250+20+20) Extendable: × = Further Information = Axle configuration Tire size: 245/70 R17.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Front axle: Twin tires; Tire tread left inside: 40%; Tire tread right inside: 25% Middle axle: Twin tires; Tire tread left inside: 50%; Tire tread right inside: 40% Rear axle: Twin tires; Tire tread left inside: 15%; Tire tread right inside: 25% Fodpfx Aljx U D Aljysgf Weights Unladen weight: 11,000 kg Payload: 37,000 kg Gross vehicle weight: 48,000 kg Identification Registration number: C340521 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2019, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: siv, Leto izdelave: 2019, Faymonville F-S43-1AAF 660 cm podaljšljiv Hidravlične rampe Vitlo Fsdpfezinblsx Alysgf Prisilno krmiljenje = Dodatne informacije = Dimenzije pnevmatik: 245/70R17.5 Vzmetenje: zračno vzmetenje Prednja os: dvojna pnevmatika; krmiljena; profil pnevmatike levo znotraj: 50 %; profil pnevmatike levo zunaj: 50 %; profil pnevmatike desno znotraj: 50 %; profil pnevmatike desno zunaj: 50 % Srednja os: dvojna pnevmatika; krmiljena; profil pnevmatike levo znotraj: 50 %; profil pnevmatike levo zunaj: 50 %; profil pnevmatike desno znotraj: 50 %; profil pnevmatike desno zunaj: 50 % Zadnja os: dvojna pnevmatika; krmiljena; profil pnevmatike levo znotraj: 50 %; profil pnevmatike levo zunaj: 50 %; profil pnevmatike desno znotraj: 50 %; profil pnevmatike desno zunaj: 50 % Lastna masa: 13.500 kg Nosilnost: 47.500 kg Dovoljena skupna masa: 61.000 kg Tipna številka: F-S43-1AAF / PODALJŠLJIV / HIDRAVLIČEN = Podatki o podjetju = VSE CENE SO NETO ZA IZVOZ. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Govorim rusko. Prizadevamo si nuditi točne podatke, vendar iz objavljenih besedil ni mogoče uveljavljati pravic.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, vzmetenje: zrak, velikost pnevmatike: 275/70R22,5, barva: modra, Leto izdelave: 2022, = Dodatne možnosti in dodatna oprema = - Zračna vzmetitev = Opombe = Faymonville F-S43-1AAF. Fgodszgbx Espfx Alyjf Letnik: 2022. 12 ton BPW osi. Teža: 12.780 kg. Nosilnost: 48.220 kg. Maksimalna teža: 61.000 kg. Obremenitev pete: 25.000 kg. Servo volan na 3 krmilnih osi. Hidravlični sistem, združljiv z NATO. EBS ABS ALB. Radijski daljinski upravljalnik. 2 x podaljšljiva: - 7400 mm. - 7600 mm. Skupna dolžina v podaljšanem stanju: 15 metrov! 1. os je dvižna os. Zračna vzmetitev. Orodjarske škatle RVS. Prevlečeno s cinkom. Dimenzije platforme: D: 13.600 mm. Š: 2480 mm. V: 1550 mm. Višina pete: 1250. Pnevmatike: 275/70R22,5, 80 %. ID št.: 495. Splošni pogoji poslovanja podjetja Heinhuis veljajo za vse oglase, ponudbe in cenitve podjetja Heinhuis, za vsa sporazuma, sklenjena s podjetjem Heinhuis, in za pogajanja, ki jim predhodijo. S kakršnim koli odgovorom soglašate z veljavnostjo splošnih pogojev poslovanja podjetja Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne cene, brez davka. = Dodatne informacije = Splošne informacije Letnik: 2022 Konfiguracija osi Velikost pnevmatik: 275/70R22,5 Znamka osi: BPW Vzmetenje: zračna vzmetitev Zadnja os 1: dvojne pnevmatike; dvižna os; maks. obremenitev osi: 12.000 kg; krmilna; profil pnevmatik levo notranji: 80 %; profil pnevmatik levo zunanji: 80 %; profil pnevmatik desno notranji: 80 %; profil pnevmatik desno zunanji: 80 % Zadnja os 2: dvojne pnevmatike; maks. obremenitev osi: 12.000 kg; krmilna; profil pnevmatik levo notranji: 80 %; profil pnevmatik levo zunanji: 80 %; profil pnevmatik desno notranji: 80 %; profil pnevmatik desno zunanji: 80 % Zadnja os 3: dvojne pnevmatike; maks. obremenitev osi: 12.000 kg; krmilna; profil pnevmatik levo notranji: 80 %; profil pnevmatik levo zunanji: 80 %; profil pnevmatik desno notranji: 80 %; profil pnevmatik desno zunanji: 80 % Teže Lastna teža: 12.780 kg Nosilnost: 48.220 kg Maks. dovoljena teža: 61.000 kg Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro = Informacije o podjetju = Za več informacij:

Stanje: rabljeno, lastna masa: 14.995 kg, največja dovoljena obremenitev: 50.805 kg, skupna masa: 65.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Leto izdelave: 2023, obratovalna teža: 14.995 kg, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with rear bevel, approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading platform: - Extendable loading platform with rear bevel, approx. 500 mm x 8° - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 4 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) - 1 intermediate section, 250 mm - Cut-outs in the outer frame of the loading area for inserting tensioning straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, chequer plate over the axles Axles and tyres: - BPW axles with hydro-mechanical forced steering Fodpfx Aov Hr Axelysgf - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - Tyres 235/75 R17.5 Braking system: - Braking system according to EU regulations with EBS-E (4S3M) Accessories included: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings mounted on the galvanized connection strip at the front - 4 chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Remote steering from front and rear via cable remote control with push buttons, including single-track control of the axles - Mounting for ALU ramps at the rear of the gooseneck - Hot-dip galvanized, extendable side extensions, approx. 230 mm per side - European reflector boards (red-yellow) at the rear of the trailer - White reflective tape as per EU standards on the sides, on the extension, and red at the rear - Bracket for warning signs on left/right of gooseneck and rear panel, incl. socket - Galvanized folding supports under the loading platform’s rear bevel - Holder for a beacon at the rear of the trailer - Central lubrication system with 2 BEKAMAX (Pico) pumps, NLGI-2 standard grease and removable cover for the pump - Mud flap at the rear of the trailer - Manual and documentation - On the gooseneck: insertable ALU side boards and rear wall, approx. 2,440 x 400 mm - Removable galvanized stanchions at the rear (body length approx. 2,560 mm) - 4 pairs of WADER container locks recessed in the loading platform for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 8 pairs of pockets for removable stanchions, 100 x 50 mm, in the outer frame of the loading platform - Adjustable hook rails for ALU ramps at the rear of the vehicle - Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition - Four warning panels, extendable approx. 400 mm, approx. 423 x 423 mm, each with position lamp - Mounting on warning panels for beacon - Radio remote control for remote steering in addition to cable remote control, with indicator lights on the receiver for single-track control - Painted-in sand layer on chequer plates, above the king pin and on the loading area for anti-slip protection - 80 km/h speed limit decal at the rear - Load pressure gauge for axle load determination, including load chart

Stanje: novo, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, skupna dolžina: 17.700 mm, skupna širina: 2.990 mm, skupna višina: 3.810 mm, vzmetenje: hidravlika, velikost pnevmatike: 245/70 R17.5 Double Fitted (143/141J), barva: rdeča, Leto izdelave: 2024, Oprema: dvižna zadnja plošča, Color: Red Payload: 100,250 kg Weights: King pin load: 38,000 kg Axle load: 12,000 kg Total axle load: 96,000 kg Gross vehicle weight (GVW): 134,000 kg Unladen weight: 33,750 kg Loading capacity: 100,250 kg Axles: Axle brand: BPW ECO PLUS Hydraulic suspension 7 steered axles (2nd axle rigid) First two axles liftable Drum brakes SN 3020 brakes for ABS, with sensors Tyres: 245/70 R17.5 twin tires Load index 143/141J Dimensions: Length: 17,700 mm Extensions: 19,500 mm Max. extended length: 37,900 mm Loading platform width: 3,990 / 3,450 mm Loading platform height: 1,050 mm +/- 150 mm Height: 3,815 mm Additional information: NATO plug Hydraulically foldable ramps Outriggers + planks for widening the loading platform Electro-hydraulic pump for trailer functions Spare wheel + holder Work lights Rear bumper with lights 2.0” king pin Central lubrication system Lashing rings Wooden loading platform Marker boards for oversize load Remote control = Further information = General information Year of manufacture: 2024 Axle configuration Tyre size: 245/70 R17.5 twin tires (143/141J) Axle brand: BPW ECO PLUS Brakes: drum brakes Suspension: hydraulic suspension Rear axle 1: twin tires; lift axle; max. axle load 12,000 kg; steered; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 2: twin tires; lift axle; max. axle load 12,000 kg; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 3: twin tires; max. axle load 12,000 kg; steered; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 4: twin tires; max. axle load 12,000 kg; steered; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 5: twin tires; max. axle load 12,000 kg; steered; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 6: twin tires; max. axle load 12,000 kg; steered; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 7: twin tires; max. axle load 12,000 kg; steered; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 8: twin tires; max. axle load 12,000 kg; steered; Tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Weights Unladen weight: 33,750 kg Payload: 100,250 kg Gross vehicle weight: 134,000 kg Functional Loading platform height: 105 cm Extendable body: Yes Fgodjuu E Tispfx Alysf Condition General condition: very good Technical condition: very good Visual condition: very good Financial information Price: On request

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.550 mm, skupna dolžina: 13.600 mm, skupna širina: 2.540 mm, skupna višina: 1.550 mm, vzmetenje: zrak, velikost pnevmatike: 275 / 70 R22.5 – Good Year, barva: rdeča, Leto izdelave: 2024, Color: Red Payload: 60,800 kg Extendable Main Features Manufacturer: Faymonville Type: F-S44-1BBY Triple Extendable Flatbed Chassis Number: YAFSR4009S0036724 Year: NEW / Unused Weights/Loading Capacity King pin load: 28,000 kg Axle load: 12,000 kg Total axle load: 48,000 kg Gross Vehicle Weight (GVW): 76,000 kg Unladen weight: 15,200 kg Payload: 60,800 kg Axles Axle Manufacturer: BPW Air suspension All axles with hydraulic steering WABCO braking system with EBS Tyres: 275/70 R22.5 – Goodyear Fgedpfjv I Dqqjx Alyjf Load index: 148/145M Dimensions Length: 13,600 mm Extensions: 7,200 mm + 7,400 mm + 7,600 mm Max. extended length: 35,800 mm Load floor width: 2,540 mm Height: 1,550 mm (+/- 100 mm) Additional Information High-resistance metallisation of the steel structure NATO plug connector Lashing rings Stake pockets Wooden load floor Mechanical landing gear Electro-hydraulic pump for trailer functions Spare wheel Rear bumper with lights King pin 2.0" + 3.5" Central lubrication system with 2 BEKAMAX pumps = Further Information = General Information Year of manufacture: 2024 Axle configuration Tyre size: 275/70 R22.5 – Goodyear Axle brand: BPW Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 3: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 4: Twin tires; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Weights Unladen weight: 15,200 kg Payload: 60,800 kg Gross vehicle weight: 76,000 kg Functional Loading platform height: 155 cm Extendable superstructure: Yes Condition Technical condition: Very good Visual condition: Very good

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function Fgodpfx Ajk Aht Uelysf - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container Fgedpjl Sl Izofx Alyef 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC Fedehlz S Nspfx Alysgf • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Load Area: - Extendable loading area with rear taper approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN) - 5 pairs of folding lashing rings on the outside (LC 5,000 daN) Fgsdpfxjup U Hzj Alysf - 2 pairs of folding lashing rings on the outside (LC 10,000 daN) - 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN) - Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc. Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing - Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tool kit - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Mounts for warning signs left and right at the gooseneck and at the rear, each with socket - One spare wheel - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized front connector strip - 4 wheel chocks - Galvanized, extendable outriggers approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Rear trailer bracket for rotating beacon - Cover plates for bridging the gap between ramps and load area - White reflective tape to EU regulations, sides and on extensions; rear in red - Electro-hydraulic unit installed at the rear beneath the loading area - Ramp control valves mounted on right trailer side - European reflective panels (red-yellow) on rear of trailer - Four extendable warning boards, approx. 423 x 423 mm, with position light - Bracket for rotating beacon on warning boards - Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (structure length approx. 2,560 mm) - 2 pairs of WADER container pockets in loading area for 20ft or 30ft container - 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling - Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection - 80 km/h speed stickers rear and both sides - Load manometer for axle load measurement, including load chart.

Stanje: novo, lastna masa: 10.900 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear bevel approx. 1,000 mm x 6° - Technical king pin load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading platform: - Loading platform, approx. 9,600 mm long with rear taper approx. 900 mm x 6° - Platform area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, with a load capacity of up to approx. 9,000 kg - Grating surface and steel sheet floor approx. 5 mm thick as additional reinforcement on the sloped section of the platform Ramps: - One pair of two-section AXS steel ramps, approx. 4,675 mm long and approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward - Painted sand coating on the outer frame and ramp tips - Flashing lights on the outer sides of the ramp tips with control switch next to the ramp operation panel - Ramp lock in transport position with quick-release fastener Axles, suspension and tires: - BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steerable (trailing) - 1st axle with traction assistance - Operated via brake pedal in the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 - TPMS tire pressure sensors installed on all wheels including spare wheels Brake system: - WABCO EBS-E braking system in accordance with EU regulations Paintwork: - Trailer MB 7350 Novagrau Equipment included: - Removable front steel wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations, except for hydraulic winches - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating with 5 mm steel underlay as additional reinforcement - Painted sand coating - Cutouts in the outer frame of loading platform and lift bed for hooking hydraulic ramp control valves on the right-hand side of the vehicle - 2" king pin - Central lubrication system with 1 pump, brand BEKAMAX - 1 pair of plug-in ALU side boards on the gooseneck, approx. 400 mm high, anodised - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Steel wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - WABCO Smart Board system Fodpfouadk Nsx Alyogf - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, lastna masa: 13.500 kg, največja dovoljena obremenitev: 51.500 kg, skupna masa: 69.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimizing loading platform length, length approx. 3,700 mm Gooseneck rear with chamfering approx. 1,000 mm x 10° Loading Platform: Telescopic loading platform, length approx. 8,800 mm, with rear chamfering approx. 500 mm x 10° Recess in the chamfer as well as into the loading platform to accommodate the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions Supply lines routed protected within the extendable beam, adapting to the respective platform length Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps individually adjustable hydraulically approx. 235 mm to the outside and approx. 215 mm to the inside Axles and Suspension: BPW axles and suspension, two rigid axles, two steering trailing axles Electromagnetic reverse lock, activated via reverse gear and manually Air suspension with lift and lower valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Brake System: WABCO braking system, EBS-E in accordance with EU regulations Lighting System: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Metalizing: Standard HRM metallization of the outer frame Complete steel structure shot-blasted, then visible defined surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) hot-refined Steel Construction: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified as per DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 as per EN ISO 14175 Accessories Included: Front wall made of steel, plug-in, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin 24N connection per ISO-11852, 24S connection per ISO-3731, 15-pin connection per ISO-12098 Round NATO socket on the front connection strip Cable to supply electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and tractor with connector (NATO-NATO) Fodpfxjk Ahuge Alyogf 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches 1 spare wheel with mounting adapter Outer beam of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included One fastening hole in the rear upper area of the gooseneck's outer beam for a screwable lashing ring 1 pair of screw-in lashing rings Approx. 40 mm thick hardwood covering above the gooseneck On the gooseneck, 1 pair of plug-in side aluminium walls, approx. 400 mm high, anodized On the gooseneck, a plug-in aluminium rear wall, approx. 400 mm high, anodized 2" kingpin Gooseneck guide plate for fifth wheel, approx. 500 mm wide 4 wheel chocks with holder Holder for aluminium approach ramps Mechanical landing gear with 2-speed gearbox and crank Continuous hardwood floor approx. 50 mm thick on the loading platform, interrupted between axles Platform locking with conically welded locking profiles every 250 mm incl. tension plate Slotted holes at the front of the loading platform for attachable and adjustable bridging elements 1 intermediate table with recessed platform, approx. 300 mm wide for the draw-out tube with large cross-section, with sheet metal covering Front and rear with slotted holes

Stanje: novo, lastna masa: 13.250 kg, največja dovoljena obremenitev: 47.550 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 245/70 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings 30 mm thick hardwood flooring Extendable loading platform: Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° 5 pairs of outward-folding lashing rings 3 pairs of outward-folding lashing rings 1 pair of flat lashing rings at the front of the loading area Cut-outs in the outer frame of the loading area for inserting tension straps Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Two-part steel ramps: One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering. Ramp with hydraulically folding and unfolding parts, hydraulic lifting system, and hydraulically adjustable position. Maximum load per pair: 40,000 kg Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool Tires 245/70 R 17.5 Braking system: Braking system according to EU regulations with EBS-E (4S3M) without connecting lines to tractor unit Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer High-quality one-color two-component (2K) top coat in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint not possible Electrical system: Electrical system according to EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connections conforming to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel headboard approx. 400 mm high At the galvanized front connection strip, yellow-red air couplings 4 wheel chocks with holders at the headboard One spare wheel with holder in front of the headboard Electro-hydraulic power unit Rear and front remote steering via cable remote control with push-buttons, with single-track control of the axles Bracket at rear of gooseneck for ALU drive-on ramps European reflector signs (red-yellow) at trailer rear White reflective tape according to EU regulations at the sides, at the extension, and red at the rear At the gooseneck and on the ramps left and right, each with a holder for warning signs including socket One holder for beacon at trailer rear Galvanized folding supports under the loading platform chamfer Ramp operating valves fitted on the right side of the trailer Cover plates to bridge the gap between ramps and loading platform One mudflap at trailer rear Manual and description on USB stick Central lubrication system BEKAMAX (Pico) with general-purpose grease NLGI-2 and removable pump guard On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm Fgjdpfx Alsl Uxdkjyjf The rear galvanized stakes are removable, superstructure length approx. 2,560 mm One INOX toolbox 1,350 x 400 x 400 on the gooseneck, box covers oil filler cap 4 pairs of WADER container pockets in the loading area for a

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Fgodpsh Etf Rofx Alyjf Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: novo, največja dovoljena obremenitev: 38.100 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5 3PMSF, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of fold-out lashing rings 3 pairs of fold-out lashing rings 1 pair of horizontal lashing rings at the front of the loading area Cut-outs in the outer frame of the loading surface for hooking in tension belts Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing legs: JOST landing legs with 2-speed gears for a 24 t lifting capacity Axles and tyres: BPW axles, two axles are fixed, two axles are self-steering, air-suspended, with drum brakes, with lift/lower function The self-steering axles come with an electro-magnetic reverse lock, which is activated via reverse gear or manually Axle toolkit Tyres: 205/65 R17.5 3PMSF Brake system: Fgsdpfxjtphtme Alyof WABCO brake system according to EU regulations with EBS-E Steel construction: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component zinc dust primer High-quality single-colour 2-component top coat in MB 7350 Novagrau No metallic paint possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system acc. to ECE R 141 At the galvanized front connection strip yellow-red air couplings 4 wheel chocks with holder on front wall Bracket at rear of gooseneck for ALU access ramps Galvanized folding supports under the chamfer of the loading surface Mount for a revolving beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tension mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof, sliding forward on ALU roof beam profiles, bolted to the front and rear wall In the loading surface, 3 pairs of sliding stakes Superstructure at rear hydraulically extendable to left and right by approx. 750 mm Sliding roof with upward swinging portal carrier Sliding tarp with 700 mm reserve length, with tension straps at intervals of approx. 600 mm Height to top edge of superstructure approx. 3,960 mm Journeys with the sliding roof open are not permitted and will damage the tarp Mounting rail for ALU access ramps at the rear of the vehicle At the gooseneck and at the rear panel left and right, each with a mount for warning signs incl. socket A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading area Lifting axle on the front axle controlled by TEBS E depending on current axle load and load status Rear structure with closed ALU double-wing doors A sanded, anti-slip paint layer on the checker plates on the gooseneck and on the loading surface BEKAMAX centralized lubrication system with standard grease NLGI-2 and a removable guard around the pump Speed stickers 80 km/h on rear and both sides Load manometer for axle load determination including load chart

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 39.400 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, obratovalna teža: 10.600 kg, Oprema: ABS, Gooseneck: - Gooseneck with 30 mm hardwood flooring - Gooseneck at rear in straight version - 3 pairs of lashing rings (LC 5,000 daN) Extendable load floor: - Load floor in extendable configuration - 5 pairs of lashing rings foldable outward - 3 pairs of lashing rings foldable outward - 1 pair of lashing rings laying at the front end of the load floor - Cut-outs in the outer frame of the load floor for attaching tension straps - Approx. 48 mm hardwood flooring, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid axles, two self-steering axles - Air suspension with drum brakes, with lift/lower function - The self-steering axles are equipped with an electromagnetically operated reverse lock, which can be activated via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system compliant with EU regulations with EBS-E (4S3M) Fgodpfxet Ag Uwe Alyof Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, lighting 24 Volt, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - High-quality and durable corrosion protection on the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-colour 2-component (2K) top coat in Novagrau - Rear section metallised and painted in RAL 9010 (Pure White) Included accessories: - One spare wheel with holder in front of the bulkhead - 2" king pin - Galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised connection bar at the front - 4 wheel chocks with holder at the front wall - Galvanised folding supports under the load floor slope - Holder for a warning beacon at the rear of the trailer - Galvanised extensions, extendable by approx. 230 mm per side - White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - European reflective markings (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear, galvanised plug-in side stanchions are removable, length of the body approx. 2,560 mm - 7 pairs of WADER container pockets - 1x 20ft container on the load floor; 1x 40ft container on the load floor; 1x 40ft container above the gooseneck; 2x 20ft container - 7 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm in the outer frame of the load floor - Lift axle on the front axle with control via TEBS E, depending on the current axle load and load condition - Sliding plug-in rail for ALU loading ramps at the rear of the vehicle - Anti-slip sand finish painted on the checker plates on the gooseneck and load floor - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position lamp - Holder for warning beacon on the warning boards - 80 km/h speed stickers at the rear and on both sides - Axle load gauge for determination of axle loads inclu

Stanje: novo, lastna masa: 14.350 kg, največja dovoljena obremenitev: 53.450 kg, skupna masa: 67.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Gooseneck: - Gooseneck in SNT design for optimization of loading bed length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading bed: - Extendable loading bed, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° - A recess in the loading bed and the chamfered section for receiving the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-part steel ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 215 mm inwards - 'Super Grip' 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the rear chamfer of the loading bed - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: - BPW axles and suspension, 1st axle steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire sensors fitted on all wheels, including spares Surface treatment: - Complete steel structure automatically blasted with shot blasting system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K top coat, single colour in MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, with the exception of hydraulic winches - 1 spare wheel - Outer carrier on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings in the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - On top of the gooseneck, approx. 40 mm thick hardwood flooring, above kingpin area with checker plate cover - 2" kingpin - Round NATO socket on front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, fold-out lashing rings in the outer frame of the loading bed - Extendable (galvanized) widenings by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, in front of the axles fully open up to gooseneck cross beam, approx. 700 x 410 mm - Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for wheel recesses, which can also be used as bridging elements for the extension or as widening boards - 1 pair mechanical rear supports - Radio and cable remote control Fgedpfjya E A Nex Alyjf - Lift axle on front axle - Square climbing bars 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° Fgjdpfxsk Af Svo Alyef - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed Fjdpfemfqi Isx Alyogf 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring