Faymonville Max 510 Flachbett Ausziehbar nakup rabljenega (9.472)

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Hnjdpfey Auhusx Apnep Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: novo, največja dovoljena obremenitev: 37.980 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with approx. 45° beveled front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform (extendable version): * Extendable loading platform with rear chamfer approx. 1,000 mm x 8° * 6 pairs of folding-out lashing rings (LC 5,000 daN) * 3 pairs of folding-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate over the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t static load) Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit is via the standardised EBS interface per ISO 11992. For correct display, the tractor unit must be able to transmit and display these data. Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock activated by reverse gear and manually * Air suspension with lift/lower valve * Axle tools Brake system: * Brake system compliant with EU regulations with EBS-E (2S2M), no connecting lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically shot-blasted after welding with blast wheel machine * Secondary blasting with corundum for optimal coating adhesion * Final painting with 2 layers of 2K topcoat, single colour RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver-grey * Rear section metallized and painted in RAL 9010 (pure white) * Paint system tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights synchronized with the indicator * ASPÖCK-UNIBOX at the front connector rail with sockets: 24N, 24S, & 15-pin according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection rail * 4 chock blocks with holder at the front wall * Mount at the rear of the gooseneck for ALU approach ramps * Galvanized folding supports under the loading platform rear chamfer Hnjdjy Aufmopfx Apnsp * At the gooseneck and on the rear panel, left and right, each with a bracket for warning signs including socket * Load gauge for determining axle loads with load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.500 kg, dovoljena osna obremenitev (os 2): 10.500 kg, dovoljena osna obremenitev (os 3): 10.500 kg, prva registracija: 11/2022, skupna dolžina: 13.900 mm, skupna širina: 2.550 mm, skupna višina: 2.400 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 17.5, medosna razdalja: 2.300 mm, Leto izdelave: 2022, Oprema: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Rear air suspension - Spare wheel = Notes = - Faymonville / Max Trailer 3-axle low loader (Type: MAX100) - Loading platform dimensions: length 930 cm x width 254 cm - Extendable up to: 1280 cm (+350 cm) - Loading height: 91 cm - Lashing rings - Wheel recess - Widening inserts - Gooseneck dimensions: length 252 cm x width 247 cm x height 40 cm - Loading height: 149 cm - 2 ALTEC aluminium loading ramps (Type: VFR120) - Dimensions: length 235 cm x width 47 cm - Maximum incline: 30% (16.5°) - 10.5-ton axles! - 18-tonne fifth wheel pressure! - 49.5 tonnes gross vehicle weight! (Technical) - LIKE NEW CONDITION! - Always stored indoors! - Only 20,000 km driven! = Further Information = Axle configuration Tyre size: 235/75 17.5 Axle brand: BPW Suspension: air suspension Rear axle 1: twin tyres; max. axle load: 10,500 kg; tyre tread left inner: 70%; tyre tread left outer: 70%; tyre tread right inner: 70%; tyre tread right outer: 70% Rear axle 2: twin tyres; max. axle load: 10,500 kg; tyre tread left outer: 80%; tyre tread right outer: 80% Rear axle 3: twin tyres; max. axle load: 10,500 kg; steered; tyre tread left inner: 70%; tyre tread left outer: 70%; tyre tread right inner: 70%; tyre tread right outer: 70% Weights Unladen weight: 10,069 kg Hnjdpfx Aoyztt Tspnsp Payload: 35,931 kg gross vehicle weight: 46,000 kg Maintenance, history and condition Number of owners: 1 APK (MOT equivalent): valid until 11.2026 Technical condition: good Visual condition: good Identification Registration number: OT-87-PP Product Safety Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL

Stanje: novo, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Recesses in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, manufacturer of our choice Axles: * BPW axles, two rigid axles, two self-tracking axles, air suspension, drum brake, with lifting/lowering function * The self-tracking axles can be locked for reversing by electro-magnetic reverse lock via reverse gear or manually * Axle tools Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Premium and durable corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc dust primer * High-quality two-component (2K) topcoat, single colour, RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2-inch king pin * Galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised connection strip at the front * Mount in the rear area of the gooseneck for ALU loading ramps Hnedpfxeyvnfge Apnop * Galvanised folding supports under the rear chamfer of the loading area * Holder for a beacon at the rear of the trailer * On the gooseneck and at the rear end panel, left and right, holders for warning signs including socket * TPMS tyre pressure monitoring system according to ECE R 141 * On the gooseneck, plug-in aluminium side walls and tailgate, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Body length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets recesses in the loading area for a 20' (30') or 40' container * Sliding hooks for aluminium loading ramps at the rear of the vehicle * 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * Galvanised extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with control via TEBS E depending on the current axle load and current loading status * 2 LED reversing lights mounted on the rear end panel * 2 pairs Ferry-

Stanje: rabljeno, največja dovoljena obremenitev: 44.420 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 11.500 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment. Complete equipment details on request. Loading platform: * Loading bed with approx. 30 mm thick hardwood floor * 9 pairs of folding lashing rings towards the outside (LC 10,000 daN) * 10 pairs of stake pockets in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm Landing gear / Support legs: * Hydraulic landing gear Tyres: * Tyres 385/65 R 22.5 - MICHELIN MULTI High Load 164K TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is carried out via the standardised EBS interface according to ISO 11992. For correct display, the truck must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical capacity 10,000 kg each, first axle hydro-mechanically steered, second axle fixed, and third axle hydro-mechanically forced-steered, mounted on turntable * Air suspension with raise/lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin connectors according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Coating: * Entire steel construction shot-blasted automatically after welding using a turbine blast machine * Second blasting treatment with corundum for optimal adhesion of the coating system * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 9005 Jet Black as per RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver grey * Coating tested by salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Included accessories: * Loading platform with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * DUOMATIK air couplings at the galvanized connection rail at the front * Storage for approx. 1,000 mm plug-in stakes, rear in the central beam * On the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket * White reflective tape in accordance with EU regulations on the sides and red at the rear * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading platform * European reflective plates (red-yellow) at the rear of the trailer * One holder for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * Manual and description on USB stick * BEKAMAX central lubrication system (Pico) with standard grease NLGI-2 and removable pump cover * 4 wheel chocks with holder on the front wall * Steering from the front and rear via cable remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit Hjdpjyu Eu Iefx Apnenp * 6 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of crosswise stake pocket bars mounted in the loading plat

Stanje: novo, največja dovoljena obremenitev: 90.700 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.850 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: Hydraulically lift/lower and detachable gooseneck. Length approx. 3,650 mm. Suitable for tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, fixed hardwood floor approx. 50 mm thick * With drive-over bridge hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm, ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical bolt-lug coupling for attaching a lowbed at the front; rear end traverse * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axle 3-axle front bogie: * PENDULUM AXLES, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shutoff taps and locking pins for securing in raised position * Final painting of axles with 2 coats of single color 2K paint, painted in MB7350 Novagrau * Rated axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tires for front bogie: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLES, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shutoff taps and locking pins for securing in raised position * Final painting of axles with 2 coats of single color 2K paint, painted in MB7350 Novagrau * Rated axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tires for rear bogie: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection * Final painting with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, according to RAL-System 841GL Including accessories: * Steel front wall, approx. 400 mm high * Plug-in aluminum side and rear boards on gooseneck, approx. 400 mm high, anodized * 3.5" kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on gooseneck * Front bogie with separate air connection for air impact wrench * BEKA-MAX central lubrication for one 3-axle bogie * Preparation for bolt-on container positioning for 1 x 20' or 1 x 30' on the outer beams * Without container locks * Brackets on the outer beams for installing foldable extensions * One 7-pin socket left and right, front and rear on rear bogie for warning panels * BEKA-MAX central lubrication for one 5-axle bogie Hodpfsw Tgp Djx Apnsnp * On the rear bogie, socket for cable remote control for steering * Rear bogie with trough * 2 LED reversing lights mounted on rear panel * European reflector boards (red-yellow) on the rear * One mudflap at rear * One LED beacon with bracket left and right on rear cross-member * Two INOX toolboxes 855 x 340 x 390 mm on gooseneck, left and right * 1-circuit...

Stanje: novo, lastna masa: 14.800 kg, največja dovoljena obremenitev: 61.700 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck with rear chamfer of approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear chamfer of approx. 500 mm x 8° • 9 pairs of folding external lashing rings • 1 pair of recessed lashing rings at the front of the loading platform • Cutouts in the outer frame of the loading platform for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate above the axles Landing Legs: • JOST mechanically operated landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd axle fixed, 4th and 5th axle follow-steering • Technical axle load: 12,000 kg • 1st, 4th, and 5th axles with electromagnetic reverse lock, activated via reverse gear or manually • Tyres: 235/75 R 17.5 3PMSF Brake System: • WABCO brake system in accordance with EU regulations including EBS-E (4S3M) Paintwork: • Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer • High-quality single-color two-component (2K) topcoat in MB 7350 Novagrau • Rear section metallized and painted in RAL 9010 (Pure White) Steel Construction: • Steel structure made from high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: • One spare wheel with holder in front of the front wall • 2" king pin • Galvanized steel front wall, approx. 400 mm high • Front galvanized connection strip with yellow-red air couplings • 2 wheel chocks with holders mounted on the front wall • Rear mount on gooseneck for ALU drive-on ramps • Galvanized extendable wideners appx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanized supports under the chamfer of the loading platform • White reflector tape on the sides as per EU regulations, red at the extension and rear • Mounts for warning panels including socket left and right at the gooseneck and rear panel Hjdpfx Asma Hf Ropnonp • Detachable ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • Rear galvanized plug-in stanchions removable (body length approx. 2,560 mm) • 3 pairs of WADER container pockets in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform • Lifting axle on the front axle with TEBS E control according to the current axle load and loading condition • Movable mounting rails for ALU drive-on ramps at the rear of the vehicle • 20 x 20 mm square climbing strips at 200 mm intervals on the outer frame chamfer of the loading platform • BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump cover • Four extendable warning panels approx. 423 x 423 mm with a position light, extendable by approx. 400 mm • Holder for beacon mounted on the warning panels • European reflector plates (red-yellow) on the rear of the trailer • 80 km/h speed limit stickers at rear and both sides • Axle load gauge with load diagram included • HRM Metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure is shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminum 15%) using hot finishing

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Hodpfx Apsiu Er Aonsnp Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full stock of immediately and soon-available vehicles on our website. Selected features listed below. Complete specification available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Load area: * Load area hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tensioning straps (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate surface above the axles Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections. Hydraulic lifting system, hydraulically extendable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout, activated by reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Tyres: * 235/75 R 17.5 3PMSF – Brand of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Wheels in silver-grey Hsdpfx Apeyhkqzsnsnp Included equipment: * 2" kingpin * One galvanized steel front wall, approx. 400 mm high * Grating surface in the gooseneck’s chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the load area’s chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Sand coating applied as slip protection to the checkered plates above the kingpin and loading area * Electro-hydraulic power unit under the rear of the load area * On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The galvanized rear stakes are removable. (Body length approx. 2,560 mm) * One electric cable winch with radio remote control, approx. 5,400 kg line pull, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for guiding the winch cable on the neck without a deflection roller * One galvanized toolbox integrated into the chamfered gooseneck, with opening for winch * Grating surface on gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for approx. 100 x 50 mm slip-in stakes in the outer frame of the loading area * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 7 pairs of... [Text truncated - please provide remaining content for further translation if needed.]

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front Hsdpfjw Tpq Dsx Apnonp - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: rabljeno, največja dovoljena obremenitev: 37.535 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Hodpfx Aoxgk U Nspnsnp Loading Platform: * Extendable loading platform with pneumatically actuated locking mechanism * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Follow-up steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Braking System: * Braking system compliant with EU regulations with EBS-E (2S2M) without interconnecting lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and long-lasting corrosion protection for the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-colour top coat finish in RAL 3002 carmine red * Silver rims * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings at the galvanised front connection panel * 4 wheel chocks with holders * 2-inch kingpin * Yellow reflector tape according to EU regulations, at the sides, on the extension, and rear of trailer * European reflector plates (red-yellow) at the rear of the trailer * Loading platform equipped with approx. 30 mm thick wooden floor, enclosed in omega profiles * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted to the inside of the front wall * 1 spare wheel holder under the loading platform, left side in the direction of travel, without spare wheel * 1 mudflap at the rear of the trailer * Manual and description on USB stick * One bracket for a warning beacon at the rear of the trailer * On the gooseneck and rear panel, each left and right, a bracket for warning boards including socket * 80 km/h speed label at rear and on both sides * Load manometer for axle load determination including load diagram * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the loading floor, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * Stainless steel toolbox, approx. 600 x 350 x 600 mm, under the loading platform, left side in direction of travel * 4 pairs of stake pocket rails mounted lengthwise on the loading platform, for plug-in stakes 80 x 50 mm * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading status * 2 LED reverse lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation)

Stanje: novo, največja dovoljena obremenitev: 39.720 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including immediately and short-term available units, can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * With beveled front corners, approx. 45°, and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area * Extendable loading area version * 5 pairs of outward-folding lashing rings (LC 5,000 daN) Hnodpfx Apeu Sd U Uenep * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of lashing rings laid flat at the front of the loading area (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs * JOST (mechanical) with two-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles * BPW axles, two fixed, two self-steering, with drum brakes * Air suspension with raise/lower function * Self-steering axle with electromagnetic reverse lock, activated by reverse gear or manually * Tyres: 205/65 R 17.5 Braking system * Wabco braking system meeting EU regulations with EBS-E (4S3M), without interconnection lines to the tractor unit Steel Construction * Made from high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer * High-grade, single-color two-component (2K) topcoat in RAL 3002 Carmine Red * Rear section metallized and finished in RAL 9010 (Pure White) * Wheels in silver Accessories included * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on galvanized front connection rail * 4 wheel chocks with holder on the front wall * Rear section of the gooseneck with mounting for aluminium ramps * Galvanized folding supports under the rear bevel of the loading area * Bracket for a beacon on the trailer’s rear * Yellow reflective tape on the sides, extension, and rear, in compliance with EU regulations * Holders for warning signs with socket on left and right of gooseneck and rear panel * TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the towing vehicle is via the standardized EBS interface per ISO 11992; for correct display the towing vehicle must be able to receive and display the data * On the gooseneck: clip-on aluminium side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * One galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding brackets for aluminium ramps at the vehicle’s rear * 7 pairs of stake pockets for removable stakes, approx. 100 x 50 mm in the outer frame of the loading area * One galvanized transverse holder under the loading area * Galvanized, extendable outriggers for widening by approx. 230 mm per side * Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full selection of vehicles available for immediate or short-term delivery on our website. Extract from the equipment list. Complete equipment details available on request. Gooseneck: * Gooseneck with beveled corners at the front approx. 45°, and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outward (LC 5,000 daN) * 2 pairs of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, foldable inward at the central beam front (LC 10,000 daN) * Cutouts in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate covering Two-part Steel Ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with grating floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp segments * Hydraulic lifting device, hydraulically movable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated by reversing gear or manually * Air suspension with lift and lower valve Braking System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Tyres: * Tyres 235/75 R 17.5 3PMSF. Brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork with 2 coats of 2-component topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver grey Hnsdsyhkrrjpfx Apnsp Included Accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * Grating floor on gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating floor on platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Electric-hydraulic power pack underneath the rear of the platform * On the gooseneck, aluminum side panels and rear panel, plug-in, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One electric winch with radio remote control, approx. 5,400 kg pulling capacity, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for anchoring winch cable on the gooseneck without pulley * One galvanized toolbox, integrated in the beveled gooseneck with an opening for winch passage * Grating floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm on the outer frame of the platform * Lift axle on the front axle with TEBS E control based on current axle load and loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Stanje: novo, največja dovoljena obremenitev: 52.810 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, featuring vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available upon request. Loading platform: * Platform with approx. 30 mm thick hardwood floor * 10 pairs of hinged external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For proper display, the tractor unit must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical load capacity 12,000 kg each, first axle rigid, all other axles hydro-mechanically force-steered, mounted on turntables * Air suspension with lift and lower valve * Axle tools Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor Steel construction: * Steel structure made of high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (Yield strength 355MPa), S690QL/S700MC (Yield strength 690MPa) Painting: * Entire steel structure automatically shot-blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of two-component topcoat, single colour in RAL 1007 Daffodil Yellow, as per RAL 841GL system * Rear section metallized and painted in RAL 9010 (Pure White) * Rims Silver Grey * Paint system tested in salt spray test according to ISO 9227-NSS * All cavities sealed with special wax Including accessories: * Platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanized front connection strip Hnodpfx Aexttc Ajpnep * At the gooseneck and rear plate left and right one bracket each for warning signs including socket * Steering from front and rear via wired remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes on the outer frame of the platform * Load pressure gauge for axle load determination including load diagram * Lift axle on the front axle controlled by TEBS E * 5 pairs of stake pocket strips across the platform for approx. 100 x 50 mm plug-in stakes * One INOX toolbox 1,200 x 460 x 550 mm, mounted at the front left underneath the platform (in direction of travel) * 1 tow coupling with reinforcement bolted to the rear crossmember * BEKAMAX central lubrication system (Pico) with NLGI-2 standard grease and removable protection for the pump * 2 LED reversing lights mounted on the rear plate * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)

Stanje: novo, moč: 375 kW (509,86 KM), vrsta goriva: dizel, gorivo: dizel, voznikova kabina: drugo, vrsta prenosa: drugo, Reversing camera, heated windscreen, hands-free system, 7-inch touch display bed control, turning assistant, front axle load 8.0 t, axle ratio 2.31, starting warning system, Apple CarPlay & Android Auto, dark dashboard, attention assistant, ComfortPlus equipment package, exterior color Frozen White, tires 385/55 22.5 make Continental / rear axle 315/70 R22.5 make Continental, CB radio antenna, DAB radio, dark interior flooring, ECOTORQ engine - 510 HP, EURO 6e, electric handbrake, electric tipping device, electrohydraulic steering with three driving modes (Comfort, Balance, Direct), simplified installation for alcohol interlock devices, driver's seat - Premium - high-quality Alcantara fabric, vehicle model Ford F-Max GEN 2.0, suspension: front axle leaf, rear axle air suspension, transmission Ford Ecotorq OD transmission - 16-speed automatic - ratio 14.107-0.823:1, rear axle 13 t, includes upper bed, instrument panel 9” color display, Intelligent Speed Limit Assist (ISLA), keyless start, automatic climate control - 3 comfort modes (ECO, Standard, Comfort), LED headlights, multimedia system with 12.4” touchscreen, truck-specific navigation system, new assistance systems: “GSR package” (General Safety Regulation), emergency brake indicator, premium upholstery Alcantara black, wheelbase/variant 3600 mm, tire pressure monitoring system, spare wheel omitted, steel wheels, fifth wheel coupling with coupling height 1100 mm, shoe compartment in entry with rubber sealing, sun blind, sun visor, standard mirrors, spoiler package with roof spoiler and side flaps, auxiliary heating (warm air), sockets (12V/24V), tank: 600 + 450 liters (F-Max standard), tanks with side covers, technology package 5: automatic high beam assistant, active brake assistant with pedestrian detection, ACC with stop-and-go function, active lane keeping assistant, USB ports type A and C, concealed step in the bumper for windscreen/sun visor cleaning, Voith retarder VR 115CT Hnedpoziup Njfx Apnjp Note Despite careful verification of all our price details, errors may still occur. Some of these may be caused by transmission errors within the systems of various platform providers. Human errors on our part are also possible. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Price information cannot be considered part of the contract. If you place particular value on a specific feature listed in our ad, please let us know at the moment of contract conclusion. Thank you for your understanding!

Stanje: novo, moč: 375 kW (509,86 KM), vrsta goriva: dizel, konfiguracija osi: 2 osi, zavore: retarder, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, Ford F-Max 510 CPP ?GEN 2 MCA? For example, the demo vehicle can be leased for 48 months through a "3-Way Leasing" program at €1,399 per month (100,000 km/year) over 48 months / alternatively 60 months via hire purchase at the same monthly rate. COM-FORD 4+0 service contract (e.g. €239/month) including a 4-year full warranty package. 3-way leasing or hire purchase available on request, subject to appropriate creditworthiness. For new orders (not stock or pre-built vehicles), free configuration is directly possible! (e.g. full air suspension, etc.) - Ford Ecotorq 12.7L diesel engine, 510 HP, Euro 6e - Voith retarder - Additional engine brake (400 kW braking power) - Automatic climate control - Auxiliary heater - Dark interior - Classic mirrors - Technology package 4 with ACC - Multimedia system with truck navigation - Radio - Bluetooth hands-free system - Refrigerator box - Lower and upper bunk beds - Electrically operated cab tilt system - 2 external storage compartments - Axle load display - Lane keeping assist, emergency braking assist - Cruise control and speed limiter - LED daytime running lights - Aerodynamics package with roof spoiler and side flaps - Electrohydraulic steering with 3 modes - 3-year full warranty and more (details upon request) Note: Subject to errors and prior sale. No liability for data transmission errors. If you are interested, please contact us directly to discuss your specific requirements. Hnodpoyvxlqsfx Apnsp

Stanje: rabljeno, največja dovoljena obremenitev: 33.525 kg, skupna masa: 46.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2008, Leto izdelave: 2008, Oprema: ABS, Proizvajalec: Kel-Berg / Faymonville Model: 4-osna strojna prikolica z izvlekom 3 m Leto: 2008 Stanje: Dobro Serijska številka: SKBE58S407KE12547 Ref. št.: 7972 Hnjdpfoxa Tdmex Apnsp Datum registracije: 30-04-2008 Bobnasta zavora: ? ABS: ? Zadnje osi: SO F Vzmetenje: Zračno Velikost pnevmatik: 235/75R17,5 Ostalo profila: 30-50% Škatla za orodje: ? Skupna masa: 46000 kg Lastna teža: 12575 kg Nosilnost: 33425 kg Notranja dolžina: 8,75 m / 12,10 m Izvlek: 3 m Prisilno vodene osi: 3+4 Hidravlične rampe: ? Hidravlična zadnja podporna noga: ?

Stanje: rabljeno, največja dovoljena obremenitev: 106.500 kg, skupna masa: 143.200 kg, konfiguracija osi: 3 osi, prva registracija: 06/2023, Weights Speed 80 km/h Fifth-wheel load: 26,000 kg - 35,000 kg Axle load: 8 x 12,000 kg - 14,000 kg Gross permissible weight: 126,000 kg - 143,200 kg Unladen weight: approx. 36,700 kg Gooseneck Dimensions (L x W): 3,755 mm x 2,480 mm Fifth-wheel height (loaded): 1,350 mm Steering radius front/rear: 1,350 mm / 2,750 mm King pin: 3.5'' Fifth-wheel load: 26,000 kg - 35,000 kg Unladen weight: 4,200 kg 3-axle front bogie, single tires 285/70 R 19.5 with pendulum axles, axle load 12–14 t Steering: counter-steering axle arrangement Wheelbase: 1,500 mm Chassis width: 2,850 mm Unladen weight: [please provide if available] Flatbed deck, single telescopic with rear separation point Hodpfx Aswcy Nqepnonp Length x width: 7,000 mm x 2,850 mm, extendable to 3,250 mm Telescopic extension: 4,000 mm Structure height: 350 mm Unladen weight: 10,000 kg Extensions: removable insert panels 5-axle rear prism bogie, single tires 285/70 R 19.5 with pendulum axles, axle load 12–14 t Steering: forced steering Wheelbase: 1,500 mm Chassis width: 2,850 mm Unladen weight: 12,150 kg Radio remote control for all functions Central lubrication system

Stanje: rabljeno, največja dovoljena obremenitev: 25.600 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Izvleček iz opreme. Popolna oprema na zahtevo. Hnodpfxozlmkws Apnjp Gooseneck prikolica Gooseneck prikolica Light, dolžina približno 4.080 mm Gooseneck prikolica s hidravlično dvigovanjem in spuščanjem ter možnostjo izvoza Za SZM: 4 x 2 in 6 x 2 Nižja platforma Nižja platforma, zasnovana kot teleskopska platforma z izrazom spredaj in mehanskim zaklepanjem. Dolžina x širina približno 6.350 mm x 1.300 mm Zadnji voziček Zadnji voziček v kratki izvedbi z zaprtim zunanjim okvirjem in valovito pločevinsko prevleko s prijemalno posodo, ki je v zadnji polovici zaprta za namestitev zračnih rezervoarjev Osi in vzmetenje Osi in vzmetenje BPW, vse osi hidravlično-mehansko sinhronizirano usmerjene. Težna obremenitev osi: 12.000 kg Zračno vzmetenje z ventilom za dvigovanje in spuščanje Orodje za os Pnevmatike 235/75 R 17.5, 3PMSF, dvojne pnevmatike Indeks obremenitve 143/141J (144/144F) Zavorna sistema Zavorni sistem znamke WABCO EBS-E, v skladu z direktivami EU. Brez priključnega kabla za vlačilnik Barvanje 6-plastna končna obdelava Celotna jeklena konstrukcija, po varjenju peskana 1 plast temeljne barve na cinkovi osnovi, 1 plast premaznega sloja Končna barva z 2 plastmi 2-komponentnega laka (akril), enobarvna v barvi RAL 3002 karminsko rdeča, nato zatesnitev votlin s posebnim voskom. Platišča v srebrni barvi Dodatna oprema vključno z: Jeklena sprednja stena, vstavljiva, približno 400 mm visoka Priključna letev za oskrbovalne linije za SZM, pritrjena na višino zunanjega profilnega okvirja Okrogla vtičnica NATO na priključni letev spredaj (Maeler & Kaege VG 96 917) Elektrohidravlična agregat 3 kW za upravljanje hidravličnih operacij, razen hidravličnih vitlov 3 pari vgrajenih pritrdilnih obročev na gooseneck prikolici (nosilnost 5.000 daN) 2 para varjenih pritrdilnih obročev LBS 3 (nosilnost 6.000 daN), spredaj približno 600 mm za sprednjo steno in zadaj na gooseneck prikolici 2 para varjenih pritrdilnih obročev LBS 3 (nosilnost 6.000 daN) na zunanjem okvirju gooseneck prikolice Na gooseneck prikolici 2 para vstavljivih aluminijastih bočnih stranic, približno 400 mm visoke, eloksirana izvedba Na gooseneck prikolici vstavljiva aluminijasta zadnja stranica, približno 400 mm visoka, eloksirana izvedba Nad gooseneck prikolico približno 12 mm debela prevleka iz Delignita 2-palčni kraljevi zatič Hidravlična prečka za podpiranje gooseneck prikolice na SZM ali dodatnem vozičku Zračna priključna točka z zračno pištolo na gooseneck prikolici Možnost dostopa na gooseneck prikolico 2 para vgrajenih utorov za steznike na gooseneck prikolici, za vstavljive steznike približno 100 x 100 mm Na notranji cevi, na zunanji strani, navojne luknje za namestitev vijakov za pritrdilne obroče M24 (nosilnost 8.000 daN) 2 para vijakov za pritrdilne obroče M24 (nosilnost 8.000 daN) vključno z Na zgornjem pasu, na zunanji strani, približno vsakih 1.200 mm možnost pritrditve ø26 mm za vijake (nosilnost 8.000 daN) 10 parov pritrdilnih obročev na zunanjem nosilcu RBS-5 (nosilnost 10.000 daN), pod in med podaljški Zložljivi, izpodrinljivi podaljški, zaklepni na približno 2.550/2.750/3.000 mm, oblazinjene preproge v razdeljeni izvedbi, z leseno prevleko Poševnost spredaj na vozičku, približno 350 mm x 12°, vključno z integriranimi letevami spredaj in zadaj za dodatne bočne deske 2 para pritrdilnih obročev s vzmetjo na prehodu med nižjo platformo in prijemalno posodo (nosilnost 10.000 daN) 3 pari vgrajenih pritrdilnih obročev v zunanjem okvirju vozička, zlož

Stanje: rabljeno, največja dovoljena obremenitev: 35.600 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Izvleček – oprema: Gooseneck prikolica: Gooseneck prikolica v izvedbi SNT za optimizacijo dolžine tovornega prostora, dolžina približno 3.700 mm. Gooseneck prikolica na zadnji strani s poševnim robom približno 1.000 mm x 6°. Težavna obremenitev sedla: 18.000 kg Za SZM (posebno vozilo za prevoz): 4 x 2 in 6 x 2 Tovorni prostor: Raztegljiv tovorni prostor, dolžina približno 9.600 mm, s poševnim robom na zadnji strani približno 900 mm x 6°. Tovorni prostor za gooseneck prikolico je hidravlično dvigljiv in spuščljiv, dolžina približno 3.000 mm. Nosilnost do približno 9.000 kg Rampe: DR-10-900-4920-GR-HV-AXS Par dvodelnih jeklenih ramp AXS s dolžino približno 4.920 mm in širino približno 900 mm. Odprta rešetkasta površina. Hidravlično zložljivi končni deli ramp. Rampe je mogoče posamično hidravlično premikati približno 235 mm navzven in približno 365 mm navznoter. Maksimalna obremenitev in naklon glede na tehnično specifikacijo: C470319 Maksimalni naklon pri spuščenem tovornem prostoru: približno 9° Osi in vzmetenje: Osi in vzmetenje BPW, 1. in 2. os fiksna, 3. os s sistemom sledenja. Težavna obremenitev osi: 12.000 kg Elektro-magnetna blokada za vzvratno vožnjo, aktivira se prek vzvratne prestave in ročno. Zračno vzmetenje z ventilom za dvig in spuščanje. Komplet orodij za osi. Zavorna naprava: Zavorna naprava blagovne znamke WABCO EBS-E v skladu z direktivami EU. Brez povezovalnega kabla za vlečno enoto. Pnevmatike: 235/75 R 17.5 3PMSF, dvojne pnevmatike. Proizvajalec po naši izbiri. Hnjdpozkx Hbofx Apnsp Indeks nosilnosti 143/141J (144/144F) Barvanje: 6-plastna končna obdelava: Celotna jeklena konstrukcija po varjenju peskana. 1 plast osnovne barve na podlagi cinka, 1 plast prajmerja. Končna barva z 2 plastmi 2-komponentne barve (akril), enobarvna v barvi RAL 3002 karmin rdeča, nato zapiranje votlin s posebnim voskom. Platišča v srebrni barvi. Večbarvno in posebno barvanje proti doplačilu. Dodatna oprema (vključno): - ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S in 15-polna. - 24N priključek v skladu s standardom ISO-1185 - 24S priključek v skladu s standardom ISO-3731 - 15-polni priključek v skladu s standardom ISO-12098 - 3 kW elektro-hidravlična enota za upravljanje hidravličnih funkcij, razen hidravličnih vitlov. - Parkirni položaj na gooseneck prikolici za opozorilne table, ko niso v uporabi. - Zunanji nosilec na gooseneck prikolici z luknjami za pritrditev vijakov za pritrdilne obroče. - Prva luknja je približno 200 mm od sprednjega roba, nato približno vsakih 400 mm. - Ena luknja za pritrditev na zadnji zgornji strani zunanjega nosilca gooseneck prikolice za vijak za pritrdilni obroč. - 1 par vijakov za pritrdilne obroče (LC 10.000 daN). - 3 pari vgrajenih pritrdilnih obročev v notranjosti zunanjega nosilca gooseneck prikolice (LC 5.000 daN). - 3 pari vgrajenih pritrdilnih obročev na sredini gooseneck prikolice (LC 5.000 daN). - 1 par vgrajenih pritrdilnih obročev na zadnji strani na sredini gooseneck prikolice (LC 5.000 daN). - Na gooseneck prikolici in poševnem robu rešetkasta površina s približno 5 mm jeklene pločevine za dodatno okrepitev. - 2 palčni kraljevi zatič. - Vodilna plošča na gooseneck prikolici za sedežno ploščo, široka približno 500 mm. - Mehanske podpore sedla z 2-stopenjsko prestavo in ročico. - JOST Modul B - statična preizkusna obremenitev = 50.000 kg - Neprekinjena rešetkasta površina z 5 mm podlago iz jeklene pločevine kot dodatna okrepitev, zasnovana za točkovno obremenitev: - Zaklepanje tovornega prosto

Stanje: rabljeno, konfiguracija osi: 3 osi, Leto izdelave: 2009, Naprodaj je Faymonville MultiMAX 4-osni pol-prikolica nizkoploščad / globoka prikolica iz leta 2009 z dovoljeno skupno maso 71.000 kg. Prikolica ima 4 osi in hidravlične nakladalne rampe. Izjemno primerna je za prevoz gradbenih strojev, delovnih strojev, nakladalnikov, bagrov, goseničarjev in težkih gospodarskih vozil. Proizvajalec: Faymonville Model / Tip: MultiMAX / TL STZ-4AU Vrsta vozila: pol-nizkoploščad / nizkoploščadna polprikolica Prva registracija: 26.02.2009 Št. šasije / VIN: YAFTL409100009798 Število osi: 4 Dovoljena skupna masa: 71.000 kg Lastna masa po homologaciji: 16.800 kg Nosilnost (preračunano): pribl. 54.200 kg Obremenitev na os: 11.500 kg Obremenitev na zatič (pivot): 25.000 kg Dolžina vozila po homologaciji: 17,76 m Širina po homologaciji: 2,76 m Barva: bela / bež 4-osna pol-nizkoploščad Hidravlične nakladalne rampe zadaj Razširljiva nakladalna površina / stranske razširitve Globokonosna izvedba za prevoz strojev Podporne noge spredaj Stranska orodjarna / zaboj za shranjevanje Rezervno kolo na labodjem vratu Privezne točke vzdolž nakladalne površine Robusten jeklen okvir Labodji vrat izvedba Osvetlitev in opozorilne table zadaj Primerna za prevoz težkega tovora in gradbenih strojev Krmarjena os = Dodatne informacije = Hnjdpfx Apjzhu A Hensp Lastna masa: 16.800 kg Nosilnost: 54.200 kg Skupna dovoljena masa: 71.000 kg

Stanje: rabljeno, največja dovoljena obremenitev: 49.900 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, naslednji pregled (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single extendable loading deck, wheel recess, with rear chamfer and loading ramps Dimension B 11,300 mm Unladen weight 15,100 kg STZ-L Gooseneck - robust steel welded construction - formed loading area 3,900 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) - ball-bearing turntable saddle plate with replaceable 2" king pin and adjustable steering wedge - mechanical landing gear at the front Loading Platform - single telescopic, designed as an outer-inner tube construction with a fixed 300 mm section at the front - 300 mm sliding table on the inner tube, movable and lockable - locking of the extension stages via spring-loaded cylinders and conical pins - 1 pair of wheel recesses behind the 1st axle, depth 410 mm Chassis - 4-axle air-suspended chassis -1st axle is liftable and steered - SAF axle assembly, including three hydromechanically forced steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Raise/lower valve as standard for lowering to a minimum of 805 mm, or raising to a maximum of 1,050 mm - Loading height 860 mm - Excavator boom recess 3,850 mm long, 750 mm wide - Wheel recess behind gooseneck 410 mm deep - Wheel recess behind the 1st axle 410 mm deep Rear End - Design: "500 mm rear chamfer" - Short 1,240 mm rear overhang from the center of the last axle - Hydraulic rear support Loading Ramps - 2-piece loading ramps, length 2,855 mm / 1,415 mm, width 890 mm - Hydraulic ramp adjustment Brake System - 2-line, all-wheel compressed air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special Equipment Hnjdpfx Aey Iq Tdepnjp - Wheel recess - Boom recess - Extendable widenings - Central lubrication system "BekaMax" - Electric power unit with radio remote control Technical Data Gooseneck Loading area (LxW): 3,900 x 2,480 mm 1,000 mm slope for Wirtgen machines Coupling height loaded: 1,250 mm Loading Platform Loading area (LxW): 8,800 x 2,550 mm Extendable by 2,800 mm Stepped up to (LxW): 11,600 x 2,550 mm Steering 1st axle liftable and steered 2nd to 4th axle hydromechanically forced steered (dual-circuit steering) Radio remote control Electric power unit

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2022, Leto izdelave: 2022, Faymonville 2-axle lowbed semi-trailer MEGAMAX 2x12 t PA 2 steered axles Single-extendable, 2 x 12 t pendle axles Overall length: approx. 13,500 mm Overall width: approx. 2,550 mm Neck width: approx. 2,480 mm Load bed width: approx. 2,550 mm Chassis width: approx. 2,550 mm Technically extendable: approx. 4,700 mm Coupling height (loaded): approx. 1,205 mm Loading height (max. loaded): approx. 1,005 mm Load area length: approx. 6,850 mm Chassis length: approx. 2,600 mm King pin distance to front: approx. 1,200 mm Swing radius of tractor unit (rear): approx. 2,300 mm Swing radius (front): approx. 1,800 mm Axle spacings: approx. 1,360 mm Gooseneck: - Gooseneck in SNT design for optimized load floor length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth-wheel load: 25,000 kg Boiler deck: - Deep-designed extendable boiler deck "SUPER LOW" design - Length approx. 6,850 mm, with mechanical locking system Rear chassis: - Rear chassis with closed outer frame, chequer plate and continuous prism digger recess, approx. 1,250/700 x 505 mm, open at the rear Hnsdpfjy Hxd Iox Apnjp - PENDLE-AXLE, all axles hydro-mechanically forced-steered - Burst hose valve on axle compensation cylinder with automated RESET function - Hydraulic cylinders with shut-off cocks and front pins to secure lifted position - Technical axle load: 12,000 kg each - Hydraulic axle levelling Brake system: - WABCO brake system, EBS-E according to regulations Chassis tyres: - 245/70 R 17.5 3PMS Metalizing: - Complete HRM metallization (High Resistance Metallisation) - Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%) Painting: - 6-coat final treatment - Entire steel structure shot-blasted after welding. One layer of zinc-based primer, one adhesion primer. Final coat with 2 layers of 2K lacquer (acrylic) in a single colour, followed by cavity sealing with special wax - Trailer colour: RAL 3002 Carmine Red - Rim colour: Silver Grey - Side board colour: Natural Aluminum Steel structure: - Steel structure made of high-strength fine-grained steels. - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690Q/S700MC (yield strength 690MPa) - MAG welding process according to EN ISO 4063

Stanje: novo, največja dovoljena obremenitev: 45.115 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Dodatna vozila na voljo Izvleček iz opreme. Popoln seznam opreme na zahtevo. Tovorna površina: - Tovorna površina z okoli 30 mm debelim trdim lesom - 8 parov zložljivih pritrdilnih obročev (nosilnost LC 10.000 daN) Hedpfx Aezhd Niepnenp Podporne noge: - JOST mehanske podporne noge z dvojnim menjalnikom, dvižna zmogljivost ca. 24 t (preskusna obremenitev ca. 50 t) Pnevmatike: - 385/65 R 22.5 - TPMS sistem za nadzor tlaka v pnevmatikah po standardu ECE R 141. - Prenos podatkov k tovornemu vozilu poteka prek standardiziranega EBS vmesnika (ISO 11992). - Vozilo mora podpirati prikaz in prenos podatkov. Premi in vzmetenje: - BPW-premi, tehnično dovoljene osne obremenitve po 10.000 kg - 1. in 3. os hidro-mehansko prisilno vodeni, nameščeni na vrtljivem ležaju, 2. os toga - Zračno vzmetenje s funkcijo dviga in spusta - Orodje za osi Zavorni sistem: - Wabco zavorni sistem po EU predpisih z EBS-E (4S3M), brez povezovalnih vodov k vlačilcu Električna oprema: - Električna oprema po zahtevah EU, razsvetljava 24 V ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX spredaj s priključki 24N, 24S & 15-polni (po ISO: 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098) Jeklena konstrukcija: - Jeklena konstrukcija iz visoko odpornega finega zrnatega jekla - Kakovost jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa) Barvanje: - Popolna jeklena konstrukcija je po varjenju avtomatsko peskana (s strojnim peskanjem) - Druga obdelava s korundom za boljši oprijem zaščitnih premazov - Končni premaz z dvema slojema 2K barve, enobarvno v RAL 3002 karmin rdeči po standardu RAL 841GL - Zadnji del kovinsko prevlečen in lakiran v RAL 9010 (čista bela) - Platišča v srebrni barvi - Premaz testiran s preskusom v slanem razpršilu po ISO 9227-NSS - Votle dele zaščiteni s posebnim voskom Oprema: - Tovorna površina z okoli 30 mm trdim lesom - 2" King pin - Pocinkana jeklena čelna stena (EN12642-XL), pribl. 1.200 mm visoka - Spredaj rumeno-rdeče pnevmatske spojke na pocinkani priključni letvi - 4 zagozde s pritrjevalom spredaj - Odlagalno mesto za približno 1.000 mm dolge snemljive stranice v osrednjem nosilcu zadaj - Na labodjem vratu in na zadnji plošči levo/desno držalo za opozorilne table vklj. z vtičnico - Rumen odsevni trak po zahtevah EU po obodu in zadaj na priklopniku - 10 parov žepov za vzdolžne stranice (pribl. 100 x 50 mm) v zunanjem okviru - Evropske odsevne table (rdeče-rumene) na zadku priklopnika - Držalo za rotacijsko opozorilno luč na zadku - Blatnik na zadku - Navodila za uporabo in opis na USB ključku - Oznake za maksimalno hitrost 80 km/h zadaj in ob strani - Elektro-hidravlična enota - Vlečna spojka za manevriranje z ojačano nosilno traverso - Manometer za določanje osnih obremenitev vključno z obremenitveno shemo - Centralno mazalni sistem BEKAMAX (Pico) z običajno mastjo NLGI-2 in snemljivim zaščitnim pokrovom - Krmiljenje osi spredaj in zadaj s kablom (daljinsko upravljanje s tipkami), z nadzorom izravnanosti osi (brez namestitve v vlačilcu) - 7 parov pocinkanih snemljivih stranic (pribl. 100 x 50 mm, pribl. 1.000 mm visoke) - 4 prečne vrste žepov za stranice, nameščene prečno v tovorni površini (pribl. 100 x 50 mm) - Spiralni kabel za napajanje elektro-hidravlične enote in/ali električnega vitla (pribl. 35 mm², pribl. 3,5 m dolg, max. 250A) med priklopnikom in vlačilcem z NATO-NATO konektorjem Dostopna lestev...

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. Hnedpfewvzg Rex Apnsp * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)