Seppi M. Bms 125 Forstmulcher Inkl. Drehmotor / Neu Lage nakup rabljenega (43.865)

Stanje: novo, Leto izdelave: 2024, dolžina zabojnika: 8 čevelj, barva: modra, lastna masa: 630 kg, prostornina tovornega prostora: 9,82 m³, širina tovornega prostora: 2.106 mm, dolžina tovornega prostora: 2.275 mm, višina nakladalnega prostora: 2.050 mm, ✔ SEA AND STORAGE CONTAINERS – all sizes & types, NEW & USED – Direct from the specialist! Nationwide transport within Germany (unloading not included) is already included in the stated price. Container Dimensions: - External dimensions (LxWxH): 2,438 x 2,200 x 2,260 mm - Internal dimensions (LxWxH): 2,275 x 2,106 x 2,050 mm - Door opening (WxH): 2,070 mm x 1,945 mm - Tare weight: 630 kg - Loading volume: 9.82 m³ - Forklift pocket spacing (center-to-center): 950 mm - Clear forklift pocket dimensions (WxH): 355 x 105 mm Load Ratings: - Max. payload: 3,500 kg - Max. floor load: 750 kg/m² - Max. lifting payload at 1.5g: 2,300 kg - Max. stacking weight: 6,500 kg - Max. point load (roof center, 30x30cm): 150 kg - Stackable: up to 3 empty units Corner Castings: - Welded container corners, external dimensions according to ISO standard, thickness 6 mm Roof: Frame construction: - Welded steel profiles, 2.5 or 3 mm thick - Weather lip on front roof beam Covering: - Self-supporting, corrugated steel sheet, 1.2 mm thick Corner Posts: - Front corner posts: 3 mm steel profile - Rear corner posts: 2 mm steel profile Walls: - Vertically corrugated steel sheet, 1.2 mm thick - 4 forced ventilation openings below the roof frame Floor: Frame construction: - Welded steel profiles, 2 to 3 mm thick transverse beams made from U-profiles Forklift pockets: - Steel profiles, 2.5 mm thick Wooden floor: - Coated laminated plywood, 21 mm thick - Water-resistant - Sealed with elastic sealing compound Doors: - Double-leaf door, with all-round special rubber seal - Opening angle approx. 270° Cladding: - Horizontally corrugated steel sheet, 1.2 mm thick Locking: - Special locking mechanisms - Made from galvanized tube and retaining angles, with integrated plastic slide bushings Hinges: - Welded onto door leaf using galvanized and forged hinges Painting: - Eco-friendly, multi-layer coating system with high weather resistance Surface preparation: Ljdpfovf H Hcsx Af Ssrl - Degreasing and zinc phosphating by immersion Primer: - Cathodic dip coating, average thickness 20 µm Top coat (exterior): - High-quality polyester powder coating, av. thickness 70 µm - Interior colour: RAL7035 Light Grey Options: - Paintwork according to CTX-RAL chart - Steel checker plate floor 3 + 1 mm - CTX anti-theft protection - Security package - Electrical installation - 2nd double-leaf door on front side - Sectional door - Window (incl. window grilles) - Personnel door 875 x 2,125 mm - Shelving - Air vent grilles CONTAINER APPLICATIONS: - Additional storage capacity - Material and tool storage - Temporary moving storage - Workshops - Technical rooms and much more. OUR SERVICES: - Container sales: all sizes and types / new and used - Europe-wide delivery by truck / side loader / rail / inland vessel - International forwarding by sea freight - Container repair - Container modification - Container accessories and spare parts All prices are plus VAT. We would be pleased to hear from you. If you have any questions, please do not hesitate to contact us. # Container trade sea containers storage containers overseas containers high cube containers material containers magazine containers site containers construction containers steel containers bar containers kiosk containers workshop containers event containers moving containers archive containers

Stanje: novo, Leto izdelave: 2024, dolžina zabojnika: 10 čevelj, barva: modra, lastna masa: 825 kg, prostornina tovornega prostora: 15,76 m³, širina tovornega prostora: 2.344 mm, dolžina tovornega prostora: 2.831 mm, višina nakladalnega prostora: 2.376 mm, ✔ STORAGE CONTAINERS OF ALL SIZES & TYPES, NEW & USED – DIRECT FROM THE SPECIALIST! Transport within Germany, excluding unloading, is already included in the listed price. Container Specifications: - External dimensions (LxWxH): 2,991 x 2,438 x 2,591 mm - Internal dimensions (LxWxH): 2,831 x 2,344 x 2,376 mm - Door opening (WxH): 2,310 mm x 2,280 mm - Tare weight: 825 kg - Capacity: 15.76 m³ - Fork pocket spacing (center to center): 950 mm - Clearance (WxH): 355x105 mm Load Capacity: - Max. payload: 10,000 kg - Max. point floor load: 1,500 kg/m² - Max. lifting payload at 1.5g: 3,350 kg - Max. stacking weight: 9,500 kg Lsdpovf Hrfofx Af Sorl - Max. roof center point load (30x30cm): 150 kg - Stackable: Up to 3 units empty Corner Castings: - Welded container corners, external dimensions according to ISO standard, 6 mm thick Roof: Frame construction: - Welded steel profiles, 2.5 and 3 mm thick - Weather lip on the front roof beam Covering: - Self-supporting, cross-corrugated steel sheet, 1.2 mm thick Corner Posts: - Front corner post: 3 mm thick steel profile - Rear corner post: 2 mm thick steel profile Walls: - Vertically corrugated steel sheet, 1.2 mm thick - 4 forced ventilation openings arranged under the roof frame Floor: Frame construction: - Welded steel profiles, 2 to 3 mm thick, transverse floor beams in U-profile Fork pockets: - Steel profiles, 2.5 mm thick Wooden floor: - Coated plywood panels, 21 mm thick - Water-resistant - Sealed with elastic sealing compound Doors: - Double-wing door with all-round special rubber seal - Opening radius approx. 270° Cladding: - Horizontally corrugated steel sheet, 1.2 mm thick Locking: - Special locking mechanisms made from galvanized tubing and holding brackets, with integrated plastic sliding bushings Fastening: - Hinges galvanized and forged, welded to the door leaf Paintwork: - Environmentally friendly combined coating system with high weather resistance Pre-treatment: - Degreasing and zinc phosphating via immersion process Primer: - Cathodic dip coating, average layer thickness 20 µm Top coat (outside): - High-quality polyester-based powder coating, average layer thickness 70 µm - Interior color: RAL7035 Light Grey Options: - Paint as per CTX-RAL chart - Floor: checkered steel plate 3+1 mm - CTX anti-burglary protection - Security package - Electrical installation - Second double-wing door at end face - Sectional door - Window (incl. window grille) - Personnel door 875 x 2,125 mm - Shelving - Ventilation grille CONTAINER APPLICATION AREAS: - Additional storage capacity - Material and tool storage - Temporary storage for relocations - Workshops - Technical rooms - And much more OUR SERVICES: - Container sales: all sizes and types / new and used - Europe-wide delivery by truck / sideloader / rail / inland vessel - International freight forwarding by sea - Container repair - Container modification - Container accessories and spare parts All prices are exclusive of VAT. We look forward to hearing from you. If you have any questions, please do not hesitate to contact us.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina zabojnika: 6 čevelj, Ponujamo vam naše povsem nove 6-stopne skladiščne kontejnerje. Barva kontejnerja: antracit RAL 7016 Slike prikazujejo dejansko stanje! Vaše prednosti na prvi pogled: ✔️ Suho skladiščenje. Kontejnerji so odporni na veter in vodo Lrsdpfx Afeypc A Eo Sol ✔️ Varno skladiščenje. Kontejner je zaklenljiv in masiven ✔️ Nov kontejner ✔️ Barva antracit RAL 7016 je pravi privlačilec pogledov! ✔️ Za doplačilo poskrbimo za dostavo! Po želji tudi z razkladanjem. Zunanje mere / notranje mere: Dolžina: 1.822 mm / 1.678 mm Širina: 1.966 mm / 1.880 mm Višina: 1.929 mm / 1.731 mm Teža: pribl. 600 kg Na voljo tudi v svetlo sivi barvi RAL 7035 Veselimo se vašega povpraševanja! Ekipa Globaltainer

Stanje: novo, številka stroja/vozila: ab Lager lieferbar!, lastna masa: 900 kg, največja dovoljena obremenitev: 2.600 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 3.010 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 185/60 R12C, medosna razdalja: 750 mm, Leto izdelave: 2026, Zelo stabilen tristrani kiper, dovoljena skupna masa 3500 kg, visoka nosilnost 2600 kg, tandem osi, Knott osi in naletna zavora, elektrohidravlika s pet-stopenjskim cilindrom, ročna črpalka za nujne primere na vlečnem drogu, stabilen okvir iz vroče pocinkanega jeklenega profila s jekleno dno, vroče pocinkano, 16 pritrdilnih zank okoli podvozja, kanali za nakladalne rampe pod nadgradnjo, aluminijaste stranice, 300 mm, z robustnimi napenjalnimi zapirali, 4 snemljivi vogalni stebrički. Nakladalne rampe, 2900 kg, doplačilo 530,00 EUR neto, niso vključene v ceno. Notranje mere nadgradnje: 3010 mm dolžina, 1850 mm širina, stabilno ojačano podporno kolo, 500 kg, kolo 230 x 80 mm. Zelo robustna izdelava, z TÜV in dokumentacijo, takoj dobavljivo iz zaloge. Lrodpfx Asu Snyzof Sol

Stanje: novo, lastna masa: 920 kg, največja dovoljena obremenitev: 2.580 kg, skupna masa: 3.500 kg, dolžina tovornega prostora: 3.010 mm, širina tovornega prostora: 1.850 mm, višina nakladalnega prostora: 300 mm, vzmetenje: drugo, velikost pnevmatike: 185/60 R 12C, medosna razdalja: 710 mm, Leto izdelave: 2026, Oprema: nalagalnik, Zelo stabilen tristrani kiper, dovoljena skupna masa 3500 kg, visoka nosilnost 2580 kg, tandem os, Knott osi in naletna zavora, elektrohidravlika s 4-stopenjskim cilindrom, ročna zasilna črpalka na ojnici, robusten okvir iz vroče pocinkanih jeklenih profilov s kovinskim dnom, vroče pocinkano, 16 obročev za pritrditev po celotnem obodu okvirja, predali za rampe pod nadgradnjo, aluminijaste stranice, 300 mm, s stabilnimi zapirali, 4 snemljivi vogalni stebri, rešetkasti podaljšek za listje, 600 mm, z vogalnimi stebri in stabilnimi zapirali, nakladalne rampe, 2900 kg, doplačilo 530,00 evrov, neto, niso vključene v ponudbeno ceno. Notranje mere nadgradnje: 3010 mm dolžina, 1850 mm širina, robustno, ojačano oporno kolo, 500 kg, kolo 230 x 80 mm. Zelo stabilna izdelava, z dokumenti TÜV, takoj dobavljivo iz zaloge. Ljdpei R H Iljfx Af Sorl

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina zabojnika: 15 čevelj, Ponujamo vam naše nove 15-ft skladiščne kontejnerje. Vaše prednosti na prvi pogled: ✔️ Suho shranjevanje. Kontejnerji so odporni na veter in vodo. ✔️ Varno shranjevanje. Kontejner je zaklenljiv (Lock Box) in masiven. ✔️ Barva: antracit RAL 7016 / svetlo siva RAL 7035 / stekleno zelena RAL 6007, druge barve na zahtevo ✔️ Novi kontejnerji ✔️ Za doplačilo poskrbimo za dostavo! Po želji tudi z razkladanjem. Zunanje / notranje mere Dolžina: 4.500 mm / 4.300 mm Širina: 2.438 mm / 2.308 mm Višina: 2.591 mm / 2.361 mm Mere vrat Širina: 2.262 mm Ljdpfx Asy Nxvijf Sorl Višina: 2.333 mm Teža Lastna teža: 1.000–1.100 kg Veselimo se vašega povpraševanja! Ekipa Globaltainer

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina zabojnika: 15 čevelj, Ponujamo vam naše nove 15-ft skladiščne kontejnerje. Vaše prednosti na prvi pogled: ✔️ Suho shranjevanje. Kontejnerji so odporni na veter in vodo. ✔️ Varno shranjevanje. Kontejner je zaklenljiv (Lock Box) in masiven. ✔️ Barva: antracit RAL 7016 / svetlo siva RAL 7035 / stekleno zelena RAL 6007, druge barve na zahtevo ✔️ Novi kontejnerji Lodpfoy Nxwyjx Af Serl ✔️ Za doplačilo poskrbimo za dostavo! Po želji tudi z razkladanjem. Zunanje / notranje mere Dolžina: 4.500 mm / 4.300 mm Širina: 2.438 mm / 2.308 mm Višina: 2.591 mm / 2.361 mm Mere vrat Širina: 2.262 mm Višina: 2.333 mm Teža Lastna teža: 1.000–1.100 kg Veselimo se vašega povpraševanja! Ekipa Globaltainer

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina zabojnika: 15 čevelj, Ponujamo vam naše nove 15-ft skladiščne kontejnerje. Vaše prednosti na prvi pogled: ✔️ Suho skladiščenje. Kontejnerji so odporni na veter in vodo ✔️ Varno skladiščenje. Kontejner je zaklenljiv (Lock Box) in masiven. ✔️ Nov kontejner ✔️ Barva: antracit RAL 7016 / svetlo siva RAL 7035 / stekleno zelena RAL 6007 — druge barve po dogovoru ✔️ Za doplačilo poskrbimo za dostavo! Po želji z razkladanjem. Zunanje / notranje mere: Dolžina: 4.500 mm / 4.300 mm Širina: 2.438 mm / 2.308 mm Višina: 2.591 mm / 2.361 mm Lsdpfx Ajy Nx Dtof Sjrl Mere vrat: Širina: 2.262 mm Višina: 2.333 mm Veselimo se vašega povpraševanja! Ekipa Globaltainer

Stanje: novo, dolžina zabojnika: 15 čevelj, Nudimo vam naše nove 15-ft skladiščne kontejnerje. Vaše prednosti na prvi pogled: ✔️ Suho skladiščenje. Kontejnerji so odporni na veter in vodo ✔️ Varno skladiščenje. Kontejner je mogoče zakleniti (Lock Box) in je masiven. ✔️ Barva antracit RAL 7016 / svetlo siva RAL 7035 / stekleno zelena RAL 6007, druge barve po dogovoru ✔️ Nov kontejner ✔️ Za doplačilo poskrbimo tudi za dostavo! Po želji tudi z razkladanjem. Zunanje / notranje mere: Dolžina: 4.500 mm / 4.300 mm Širina: 2.438 mm / 2.308 mm Višina: 2.591 mm / 2.361 mm Mere vrat: Širina: 2.262 mm Višina: 2.333 mm Teža: Lastna teža: 1.000–1.100 kg Veselimo se vašega povpraševanja! Ekipa Globaltainer Lsdpfsww Tptsx Af Serl

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina zabojnika: 15 čevelj, Ponujamo vam naše nove 15-ft skladiščne kontejnerje. Vaše prednosti na prvi pogled: ✔️ Suho shranjevanje. Kontejnerji so odporni na veter in vodo. ✔️ Varno shranjevanje. Kontejner je zaklenljiv (Lock Box) in masiven. ✔️ Barva: antracit RAL 7016 / svetlo siva RAL 7035 / stekleno zelena RAL 6007, druge barve na zahtevo ✔️ Novi kontejnerji ✔️ Za doplačilo poskrbimo za dostavo! Po želji tudi z razkladanjem. Zunanje / notranje mere Dolžina: 4.500 mm / 4.300 mm Širina: 2.438 mm / 2.308 mm Višina: 2.591 mm / 2.361 mm Mere vrat Širina: 2.262 mm Višina: 2.333 mm Teža Lastna teža: 1.000–1.100 kg Veselimo se vašega povpraševanja! Ekipa Globaltainer Ledpfx Afoy Nxwgj Sorl

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, dolžina zabojnika: 15 čevelj, Ponujamo vam naše nove 15-ft skladiščne kontejnerje. Vaše prednosti na prvi pogled: ✔️ Suho shranjevanje. Kontejnerji so odporni na veter in vodo. ✔️ Varno shranjevanje. Kontejner je zaklenljiv (Lock Box) in masiven. ✔️ Barva: antracit RAL 7016 / svetlo siva RAL 7035 / stekleno zelena RAL 6007, druge barve na zahtevo ✔️ Novi kontejnerji ✔️ Za doplačilo poskrbimo za dostavo! Po želji tudi z razkladanjem. Zunanje / notranje mere Lrodey Nx A Ajpfx Af Sel Dolžina: 4.500 mm / 4.300 mm Širina: 2.438 mm / 2.308 mm Višina: 2.591 mm / 2.361 mm Mere vrat Širina: 2.262 mm Višina: 2.333 mm Teža Lastna teža: 1.000–1.100 kg Veselimo se vašega povpraševanja! Ekipa Globaltainer

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, For sale is a new tipper trailer (rear tipper) designed for professional use in construction, commercial, and transport sectors. The trailer stands out thanks to its robust construction, hydraulic tipping function, and versatile application possibilities – ideal for bulk materials, equipment, and construction site materials. 🔧 Technical Data: • Design: Rear tipper • Permissible gross weight: 1,350 kg Lrjdpfjy Dtrzox Af Sel • Payload: approx. 942 kg • Axles: 1 • Braked: Yes • Tyres: 13 inch • Internal dimensions (L x W x H): 256 x 148 x 30 cm • Side wall height: 30 cm • Loading floor: Steel plate • Tipping function: Hydraulic (operated manually) ✅ Features & Specifications: • Robust welded and hot-dip galvanized chassis • Solid V-drawbar, hot-dip galvanized • Hydraulic tipping function for convenient unloading • All four side walls foldable and removable • Detachable corner posts for maximum flexibility • Flat steel loading floor for easy loading (also via forklift) • Lashing points at the corners for secure load securing • Multifunctional lighting mounted protected under the side walls • Automatically folding jockey wheel (Ø 60) as standard 👍 Benefits: • Ideal for bulk materials, soil, gravel, wood, and construction site material • Highly flexible due to fully opening side walls • High stability thanks to professional welded construction • Fast and easy unloading thanks to tipping function • Versatile for everyday commercial use 📦 Availability: • Brand new • Ready for delivery within a few weeks • Short-term delivery possible (subject to availability) 📍 Collection & Delivery: • Collection in 29690 Buchholz (Aller) possible • Nationwide delivery in Germany upon request Your Globaltainer Team

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, barva: sivo-črna, širina tovornega prostora: 2.000 mm, dolžina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 2.000 mm, Small 2m equipment shed with large double doors. Perfectly suited for storing or parking firewood, garden tools, equipment, electrical devices, bicycles, and much more. Thanks to the robust, rust-free base frame, the garden shed can be safely placed on lawns or grass areas. Sturdy yet mobile construction—"in most cases permit-free". As usual from us: 6 prefabricated elements, assembly time depending on size approx. 20 minutes. + Assembly from the inside, so you can place the container directly against a fence, for example + Scope of delivery: - 2m equipment shed Dimensions: 2.14 x 2.02 x 2.09 meters Equipment shed with double doors in Anthracite RAL 7021 (sturdy, hard-wearing floor made of high-quality OSB boards) - Security lock with double cylinder incl. keys - Illustrated assembly instructions - Mounting material for the sheet metal container - 4x crane lifting eyes - Forklift pockets Description: Our top seller among storage sheds. German steel, made in the EU. Ideal for use as a garden hut, tool shed, or wood shelter. This storage solution provides ample space for lawn mowers, bikes, tools, and more. Highest security: The storage container door is secured with two cylinders. No compromises were made on security; robust pin cylinders are used. As a result, there’s no need for additional burglary protection. The floor is made of high-quality, durable OSB panels. The subframe consists of robust, galvanized, and additionally powder-coated steel supports. The frame runs around the entire shed, enabling installation even on uneven surfaces. The ground type doesn’t matter anymore (meadow, field, etc. – installation is now even easier anywhere). The large double door is positioned on the face side (on the 2m side). The shed is both craneable and suitable for forklift handling, making it absolutely mobile and allowing it to be lifted even when stocked, "inside the container," by forklift. Naturally, all containers remain crane-capable at all times. Advantages of LagercontainerXXL storage sheds: Immediate usability after assembly (approx. 15–20 min.) Full mobility: Precise screw guides and just 6 finished elements make assembly and disassembly quick and easy. This process can be repeated several times without loss of quality. Technical Data: Shed dimensions (L x W x H): --> External: 2142 x 2020 x 2088 mm --> Internal: 1872 x 1990 x 1950 mm --> Disassembled: 2022 x 2142 x 400 mm Weight: 315 kg Door (clear passage): approx. 1750 x 1900 mm (double door) Colour: RAL 7021 black-grey / anthracite Maximum load: with crane handling --> 1,500 kg with forklift handling --> Yes max. floor load --> 500 kg/m² max. roof load --> 210 kg/m² Lrsdpfjuyhk Njx Af Ssl Delivery and Assembly: - Delivery is carried out by freight carrier (we will inform you of the exact delivery date and time by phone; you are also welcome to let us know your preferred delivery date without obligation) - The container is delivered disassembled (pre-assembly possible for an extra charge). A forklift is recommended for unloading. Unloading is also possible with two people. When unloading manually, individual elements can be safely unloaded by hand. Assembly: Equipment shed 2m --> Weight 315 kg --> 2 assemblers --> Assembly time approx. 15–20 min.

Stanje: novo, delovna širina: 2.300 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Greentec RM 232 Hedge Mulcher / incl. MS08 Adapter Plate / NEW machine / in stock & immediately available Price: €14,590.00 net / €17,362.10 gross - Working width: 2,300 mm - Number of rotors: 4 units - Number of blades per rotor: 6 units - Max. cutting diameter: 4 cm - Working speed up to: 4 km/h - Required hydraulic connections: 1 x double-acting + 1 x return line (drain oil) - Minimum oil flow: 50 l/min at 180 bar - Weight: 310 kg Delivery without hydraulic hoses and flow divider! Key features: High capacity – Maintain large hedges in no time Unique cutting system – Cuts and shreds branches in one pass Very long service life – Constructed using high-strength steel components The Greentec RM 232 branch cutter is designed for professional use by municipalities, farmers, and contractors. The machine offers a large working width and high operational speed, providing outstanding capacity. Branches are cut and shredded in a single pass. The processed material drops gently onto the ground for decomposition to begin. Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We offer a very wide selection of various Greentec products, all in stock for immediate delivery! Mr. Herden (phone) will gladly assist you. Upon request, we can also provide a financing offer. Lrsdpfx Afey E Ettj Sol We are the official sales and service partner for: - Westtech - OilQuick - Holp - Magni Telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB Construction Machinery - Mercedes-Benz - Iveco Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range! Errors and prior sale excepted! = More information = Please contact Marius Herden for further details.

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at rear * Side underrun protection * Pivoting supports at the rear on chassis frame * Mechanically adjustable warning sign packages front and rear Ledpfsl Thxdex Af Sjrl * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Fold-down (hot-dip galvanized) lid for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm draw eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package (La-Si-Paket) comprising: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into outer frame - in the corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear inclined section) * Extension boards stowed in the center of the loading area * Excavator arm rest over rear axle up to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) * 4-way control block for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unloaded loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unloaded loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tank, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at rear Lredpfel Th Adjx Af Sjl * Side underrun protection * Pivoting supports at the rear on chassis frame * Mechanically adjustable warning sign packages front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Fold-down (hot-dip galvanized) lid for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm draw eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * 4 stake pockets on each side (stakes not included), with simultaneous lashing facility * Load securing package (La-Si-Paket) comprising: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed into outer frame - in the corners rated to 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in rear inclined section) * Extension boards stowed in the center of the loading area * Excavator arm rest over rear axle up to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) * 4-way control block for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unloaded loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unloaded loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tank, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, For inquiries regarding attachments, Mr. Herden will be happy to assist you (by phone: ...). Kinshofer Clamshell Bucket / Two-Shell Grab / Grapple / KM 604 - 350 / NEW Price: €5,300.00 net / €6,307.00 gross Capacity (liters): 350 Width E (mm): 650 Maximum opening (mm): 1,390 Number of teeth: 5 Weight (kg): 240 Closing force (kN): 20 Load capacity (kg): 3,000 - Including bolt-on excavator teeth - Including KM 04 F rotator motor Operating pressure: 26–32 MPa (260–320 bar) at 40 – max. 75 l/min Ljdpeyi Rz Nefx Af Sorl The KM 604 is a practical two-shell grab for daily use – robust, functional, and cost-effective. - Maximum loading height due to compact design with horizontally mounted cylinder. - Long service life thanks to use of knife-edged material with Brinell hardness 500 HB and generously dimensioned bearings. - Synchronized shell movement due to robust, forged compensation linkage. - Bolt-on excavator teeth included as standard. - Excellent digging performance due to high closing force (20 kN at 26 MPa operating pressure). We have a very large selection of various attachments in stock, ready for immediate delivery! Mr. Herden (phone: ...) will be happy to assist you. Financing offers available on request. We are official distribution and service partners for: - Magni telehandlers - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealerships in Germany. Errors and prior sale excepted! = More Information = Intended use: Construction Contact Marius Herden for further information.

Stanje: rabljeno, Leto izdelave: 2024, delovna širina: 85.000 mm, For inquiries regarding the attachment, Mr. Herden is at your service (by phone). Seppi M. H3 085 / Flail Mulcher / Mulcher / incl. MS03 / DEMO unit / in stock & immediately available / Top condition! Price: €7,040.00 net / €8,377.60 gross The mulcher has only been used briefly once! - Working width: 85 cm - Overall width: 97 cm - Depth: 80 cm - Height: 66 cm - Weight: 181 kg Equipment: - incl. MS03 adapter plate - Mulching head for attachment to a hydraulic arm - Mulches grass and brushwood up to 3 cm Ø - For excavators from 2 to 5 tons - Suitable for mounting on various adapter plates - Floating linkage (parallelogram guide) - Indirect drive via three V-belts - Drive prepared for hydraulic motor depending on carrier’s oil flow - Housing made of wear-resistant AR400 steel - Front guard with chains - Rear guard made of rubber - Reinforced support roller with double tapered roller bearing, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flails (standard) - 9 pieces, part no. 150.02.041 OPT 428 Hydraulic gear motor 11cm³ - With flow control valve and DRAIN SAFE TM motor protection valve protects the motor in case of incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 20 - 50 OPT 529 DRAINLESS system with accumulator (NO leakage oil line required!!) - Including hoses and check valve 2 hydraulic lines required: supply and return. No leakage oil! Device is delivered without hoses or connectors. We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. In our warehouse we stock a very large selection of immediately available products by Seppi M.! Lredpoyklntjfx Af Ssl Mr. Herden (phone: ) is happy to assist you. Financing offers available on request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Errors and prior sale excepted! Internal ref: 520013 = More information = Please contact Marius Herden for further information.

Leto izdelave: 2024, stanje: rabljeno, For inquiries regarding the crawler, Mr. Herden is at your service (by phone). Seppi M. MAX 75 HP / 75 hp / Radio-controlled crawler vehicle / Recovery winch / Seppi M. MICROFORST rc 155 forestry mulcher / Seppi M. H 5 rc 175 mulcher / In stock & available immediately Price for crawler without attachments: €126,190.00 net / €150,166.10 gross Standard specifications and features: Dimensions*: - Total width of crawler undercarriage retracted: 1,650 mm - Total width of crawler undercarriage extended: 2,450 mm - Depth: 2,600 mm - Height: 1,250 mm - Track length: 1,570 mm - Track width: 230 mm - Cross/Longitudinal inclination: 55° - Weight (without equipment): 2,200 kg Engine: - Perkins 4-cylinder diesel engine - Output: 55 kW / 75 hp - Torque: 270 Nm at 1,800 rpm - Displacement: 2,200 cc - Cooling with automatic reversible fan (automatic fan cleaning) Drive: Tool Hydraulic System: - High-flow hydraulic circuit (closed circuit) for attachments (double-acting): - Capacity: 93 l/min max. at 2,750 rpm - Pressure: 380 bar Service Hydraulic System: - Low-flow hydraulic circuit for attachments (double-acting): - Capacity: 15 l/min max. at 2,750 rpm - Pressure: 200 bar Vehicle Hydraulic System: - Capacity: 154 l/min max. at 2,750 rpm - Max. pressure: 400 bar Undercarriage: - HIGH GRIP: Stability and ground contact on slopes up to 55° in optimal conditions - Hydraulic track width adjustment: 800 mm (2x400 mm) - AUTO TRACK TENSION: Active automatic track tensioning - Patented anti-derailment protection - Stability and traction thanks to robust tread and large contact area of the tracks Control: - Radio remote control with graphic display (vital machine stats and inclination monitor) - Range: 150 m - Potentiometer for speed control with variable feed from 0 to 100% Lift system: - FLOAT: Lift system with supported floating position (ground pressure control) Standard equipment: - Vehicle with rollover bar - LED headlights - Internal components protected by very robust steel paneling - Underbody protection plate for engine and hydraulics - Color: anthracite RAL7021 | red RAL3020 OPT 573 Bio hydraulic oil OPT 221 Rear forestry guard with recovery winch. Optional: SEPPI M. MICROFORST rc 155 – hydraulic forestry mulcher Price: €23,130.00 net / €27,524.70 gross Optional: SEPPI M. H5 rc 175 – hydraulic mulcher Price: €13,770.00 net / €16,386.30 gross We have a very large selection of various Seppi M. products in stock and available immediately! Mr. Herden (phone) will be happy to assist you. We are happy to provide you with a financing offer upon request. Lrsdpeyfrpgofx Af Ssl We are an official Seppi M. sales and service partner. We supply the entire Seppi M. product range for you! Subject to errors and prior sale! Rental possible = Additional information = New: Yes Please contact Tobias Ebert for more information.

Stanje: novo, moč: 235 kW (319,51 KM), vrsta goriva: dizel, število sedežev: 49, vrsta prenosa: samodejen, barva: bela, zavore: retarder, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, parkirni grelec,

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, RAL7016 ANTHRACITE Nationwide delivery within Germany available for an additional charge! Are you looking for a high-quality, reliable container? Then we have just the right solution for you! Our 20ft container has only completed a single sea voyage and is ready to serve your individual needs. With the following external/internal dimensions: Length: 6,058 mm / 5,898 mm Width: 2,438 mm / 2,350 mm Height: 2,591 mm / 2,390 mm this container offers ample space for your goods, furniture, or whatever you need to transport. Additionally, you have the option to choose the container in various RAL colour shades—with our recommendation being the elegant RAL5010 tone. The price for this container also includes loading, so you don’t have to worry about a thing. Our containers are distributed nationwide across Germany at the following locations: Ledpfx Afeyv Acae Ssrl Aschaffenburg, Bremen, Berlin, Großbeeren, Duisburg, Düsseldorf, Kornwestheim / Stuttgart, Lübeck, Ulm, Neuss, Nuremberg, Munich, Unterföhring, Riesa, and many more. Furthermore, we offer you the possibility to have custom modifications carried out on the container. Whether additional doors, windows, or other adjustments—we can realize your requirements and customize the container exactly to your specifications. Don’t hesitate—secure this premium 20ft container for yourself today! Contact us now for more information or to arrange a viewing appointment. We look forward to assisting you with your transport and storage needs!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, barva: srebrn, širina tovornega prostora: 4.000 mm, dolžina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 2.000 mm, ❇️ Container – Made in Germany! With TÜV Certification ❇️ Available for Immediate Delivery The quick-assembly containers are available in 2 to 6 meters (a 6-meter storage container is equivalent to approx. a 20-foot sea container). The floor is made from high-quality OSB panels. Extremely robust and durable. The containers are equipped with a double door, lever handle, and door lock on the end face. Ledpjxnb Nmofx Af Sorl Containers are suitable for crane and forklift handling: Specially mounted crane lugs on the sides make the containers craneable up to a total weight of 3 tons. Manufactured 100% in Germany. Advantages of LagercontainerXXL containers: - Ready for immediate use after assembly in approx. 30 minutes - Full mobility: The containers feature patented quick-release fasteners, enabling extremely fast assembly and disassembly. This process can be repeated multiple times without loss of quality. - The quick-assembly container is absolutely suitable for industrial and trade applications. - Stackable and assembly-friendly kit with assembly instructions Technical Data: Storage Container Dimensions (L x W x H): --> External: 4100 x 2100 x 2100 mm --> Internal: 3980 x 1980 x 1950 mm --> Dismantled: 4100 x 2100 x 400 mm Weight: 500 kg Door: 1750 x 1890 mm (double-leaf door) Maximum Load: With crane handling --> 1500 kg With forklift handling --> possible Max. floor load --> 500 kg/m² Max. roof load --> 210 kg/m² Delivery and Assembly: - Delivery by freight forwarding company (You will receive the exact delivery date and time by phone; you are welcome to inform us of your preferred delivery date without obligation) - The container is delivered dismantled (assembly available at extra cost). A forklift is recommended for unloading. Unloading by 2 people is also possible. Assembly: Quick-assembly container 4.10 m --> weight 450 kg --> 2 assemblers --> assembly time approx. 30 min In-stock merchandise!!! Delivery throughout Germany! Express delivery available, please inquire. Opening hours: Mon - Fri: 9:00 - 19:00 Sat: 9:00 - 14:00 We have several containers on display that you can view at any time (including Sundays). Elipo GmbH Am Kolba 2 92360 Mühlhausen

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, barva: srebrn, lastna masa: 250 kg, Scope of delivery: - 2m sheet metal container with double door, external dimensions 2.14 x 2.02 x 2.09 meters (durable and resilient floor made of high-quality OSB panels) - Security lock with double cylinder incl. keys - Illustrated assembly instructions - Assembly hardware for the sheet metal container - 4x crane lifting eyes - Forklift pockets Description: Our latest container model for 2025. German steel, Made in EU. Ideal for use as a garden container, tool shed, or wood storage. Also recommended for construction, trades, and agriculture. Maximum security: The storage container door is now secured by two cylinders. No compromises made on security—heavy-duty ball cylinders are used, making any additional anti-burglary device unnecessary. The floor is made from high-quality OSB panels, extremely robust and hard-wearing. The base frame is constructed from solid, galvanized steel beams surrounding the entire container, allowing assembly even on uneven ground. Thus, the type of surface is irrelevant (grass, field, etc.—assembly is easier almost anywhere). The door is located on the end face (on the 2m side). Containers are suitable for crane and forklift handling. This makes the container fully mobile if needed and can be lifted even with inventory inside using a forklift. Naturally, all containers remain crane-compatible. Advantages of LagercontainerXXL sheet metal containers: Immediate usability after assembly in approx. 10-15 minutes. Full mobility: Thanks to precision bolt guides and only 6 pre-fabricated elements, assembly and disassembly is quick and straightforward. This process can be repeated several times without loss of quality. The sheet metal container is absolutely suitable for industrial and trade use. Stackable and user-friendly kit with assembly instructions included. Technical data: Storage container dimensions (L x W x H): --> External: 2140 x 2002 x 2088 mm --> Internal: 1872 x 1990 x 1950 mm --> Flat pack: 2022 x 2142 x 400 mm Weight: 315 kg Door: 1750 x 1900 mm (double leaf/double door) Maximum load: For crane handling --> 1500 kg For forklift handling --> YES Max. floor load --> 500 kg/m² Max. roof load --> 210 kg/m² Delivery and assembly: - Delivery is carried out by freight forwarding company (Exact delivery date and time will be communicated by phone; you can also indicate your preferred date without obligation) - The container is delivered flat-packed (pre-assembly available at extra charge). A forklift is recommended for unloading. Unloading is also possible with 2-4 people. If unloading by hand, the six individual parts can be easily unloaded by hand. Assembly: Rapid-assembly container, 2m --> Weight 315 kg --> 2 installers --> Time required approx. 10-15 min Lrjdpfx Aoxpnccof Ssl

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 19 kW (25,83 KM), vrsta goriva: dizel, lastna masa: 2.850 kg, stanje verige: 95 odstotek, število sedežev: 1, prva registracija: 02/2024, Leto izdelave: 2023, obratovalne ure: 230 h, Oprema: UVV varnostni pregled, dodatne luči, gumene gosenice, hidravlika, hidravlično kladivo, kabina, standardna žlica, Perkins diesel engine (18.4 kW / 25 HP / Stage V emissions) Hammer, shear, and tilt bucket hydraulics (electro-proportional) Bucket/grab changeover valve Selector valve for single-acting (hammer) or double-acting function Dipperstick length: 1,300 mm LED work lights Radio preparation Heating Mechanical quick coupler, Type 03 Lehnhoff system Lrjdjuggkfepfx Af Ssl 1 standard digging bucket of your choice Weight approx. 2,850 kg JCB manufacturer's warranty until 09/2026

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, širina tovornega prostora: 2.100 mm, dolžina tovornega prostora: 5.000 mm, višina nakladalnega prostora: 2.100 mm, Scope of delivery: - 5m steel sheet container with double doors, dimensions 4.88 x 2.14 x 2.09 meters (durable and hard-wearing floor made of high-quality OSB panels) - Security lock with double cylinder, including keys - Illustrated assembly instructions - Assembly material for steel sheet container - 4x crane lifting eyes - Forklift pockets Description: Our latest container model for 2026. German steel, made in the EU. Maximum security: The storage container door is now secured by two cylinders. We did not compromise on security—robust ball cylinder locks are used. This eliminates the need for any additional break-in protection. The floor is made from high-quality OSB panels, providing exceptional stability and durability. The subframe is constructed from robust, galvanized steel beams and runs around the entire container perimeter, allowing for installation on uneven surfaces. The ground condition is no longer an obstacle (meadow, field, etc.—installation is simple anywhere). The door is positioned on the end side (2m side). Containers can be handled by crane or forklift. This makes the container fully mobile if required, and it can be lifted with inventory inside via forklift. Naturally, all containers remain crane-liftable as well. Advantages of LagercontainerXXL steel sheet containers: - Immediate usability after assembly in approx. 20–40 minutes - Full mobility: precise screw guides and only 6 pre-assembled elements make assembly and disassembly quick and easy - This process can be repeated multiple times without loss of quality - The steel sheet container is perfectly suited for industrial and trade applications - Stackable and user-friendly kit with assembly instructions Technical data: Storage container dimensions (L x W x H): - External: 4882 x 2142 x 2088 mm - Internal: 4727 x 1990 x 1950 mm - Flat-packed: 4882 x 2142 x 400 mm Weight: 590 kg Door: 1750 x 1900 mm (double door) Maximum load capacity: - For crane handling: 1,500 kg - For forklift handling: YES - Max. floor load: 500 kg/m² - Max. roof load: 210 kg/m² Ledpjyg Duqsfx Af Sjrl Delivery and assembly: - Delivery is by freight forwarding (You will be informed of the exact delivery date and time by telephone. You are welcome to let us know your preferred date without obligation) - The container is delivered flat-packed (assembly can be provided for an extra charge). A forklift is recommended for unloading, but unloading is also possible with 4 persons. When unloading by hand, each of the 6 elements can be safely moved individually. Assembly: Quick-assembly container 5m → weight 590 kg → 4 assemblers → assembly time approx. 20–40 min