Hyundai Hl 940 A Inkl. Hydr. Schnellwechsler & Erdschaufel Neu nakup rabljenega (58.496)

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation, rear * Side underrun protection * Rear swing-down supports on chassis frame * Mechanically adjustable warning sign packages, front and rear * Front: closed plastic fenders; rear: straight galvanized steel mudguards, each with spray protection * Reflective contour tape, side and rear * Hinged lid (hot-dip galvanized) for toolbox in the turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at the rear * Tow bar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), each with lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3 m total width (not in the rear taper) * Extension planks stored at the center of the loading area * Excavator arm rest above rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing eyes on the sides of the excavator arm rest) * Hydraulically one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, turntable, tow bar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty Hedpox Ipb Hofx Anmjl * Subject to errors and prior sale * Available immediately ex works Egestorf near the A7

Stanje: novo, For inquiries about the attachment, please contact Mr. Herden (by phone) for assistance. Seppi M. BMS 125 Forestry Mulcher / incl. rotation motor / NEW / in stock and immediately available Price: €35,190.00 net / €41,876.10 gross Working width: 125 cm Overall width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal unit for mulching in hard-to-reach locations such as roadways, riverbanks, steep slopes, or for clearing gas and power lines - Mulches brush and wood up to 30 cm diameter Hjdpfxsyltv Ij Anmjl - For excavators from 13 to 30 t - For mounting on various adapter plates - Drive designed for hydraulic motor depending on the carrier vehicle's oil flow - Indirect V-belt drive with 5 belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front guard with chains - Rear guard with chains - Sandwich-design skid shoes, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools featuring tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, Part No. 19702266 - 33 x MONO TIP V-LOCK, Part No. 19702259 - 1 x MONO EXTREME V-LOCK R, Part No. 19702267 OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow: 80 - 170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood The rotor requires 3 hydraulic lines: feed, return, and drain. A separate hydraulic circuit is needed for the hood. The unit is supplied without hoses and connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and available for immediate delivery. We keep a very large selection of various Seppi M. products in stock and immediately available! Contact us for more information at / . On request, we are pleased to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. program! Errors and prior sale excepted. = More information = Please contact Marius Herden for further information.

Stanje: novo, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (contact number on request). DMS SG9050 Sorting Grab with Rotator / New unit / In stock & available immediately / incl. teeth (bolted) Price: €9,790.00 net / €11,650.10 gross - Bucket width: 500 mm - Volume: 200 L - Weight (without rotator): 320 kg - Rotator weight: 77 kg - Operating pressure: 280 bar - Closing force: 26 kN - Torque: 3,000 Nm - Opening width: 1,721 mm - Excavator class: 6 - 9 t Options: - Cutting edge kit €451.00 net - Pipegrip kit €1,400.00 net - Softgrip kit €880.00 net - MS03 adapter plate: €560.00 net - MS08 adapter plate: €865.00 net We have many more DMS grabs in stock and immediately available! Mr. Herden (contact number on request) will be pleased to assist you. Upon request, we will gladly provide you with a financing offer. We are an official sales and service partner for: - Westtech - Magni telehandlers Hodpfx Aneyltuqemol - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - JCB construction equipment - Mercedes-Benz - Iveco With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete DMS product range for you! Errors and prior sale excepted! = Further Information = Intended use: Construction Please contact Marius Herden for further information.

Stanje: novo, For inquiries regarding attachments, Mr. Herden will be happy to assist you (Tel. available upon request). DMS SG3535 sorting grab with rotator / New unit / In stock & immediately available / incl. teeth (bolt-on) Price: €5,690.00 net / €6,771.10 gross - Shell width: 350 mm - Volume: 50 L - Weight (without rotator): 112 kg - Rotator weight: 29 kg - Operating pressure: 250 bar - Closing force: 16 kN - Torque: 1,200 Nm - Opening width: 976 mm - Excavator class: 2 – 3.5 t Optional: - Cutting edge set: €330.00 net - Pipe grip set: €1,050.00 net - Soft grip set: €660.00 net - MS03 adapter plate: €540.00 net We have many other DMS grabs in stock and available for immediate delivery! Mr. Herden (Tel. upon request) will be glad to assist you. Upon request, we will be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS product range for you! Subject to errors and prior sale! = Additional information = Hodoylttyspfx Anmel Intended use: Construction Please contact Marius Herden for further information.

Stanje: novo, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (via phone). DMS SG2030 Sorting Grab including Rotator / NEW / Unused / in stock & immediately available / including bolt-on teeth Hedpfeyltttjx Anmol Price: €4,390.00 net / €5,224.10 gross - Shell width: 300 mm - Volume: 20 L - Weight (without rotator): 95 kg - Rotator weight: 20 kg - Operating pressure: 220 bar - Closing force: 16 kN - Torque: 1,000 Nm - Maximum opening: 816 mm - Excavator class: 1 – 2 t Options: - Cutting edge set: €292.00 net - Pipegrip set: €990.00 net - Softgrip set: €597.00 net - MS01 adapter plate: €320.00 net - MS03 adapter plate: €540.00 net We stock many other DMS grapples that are immediately available! Mr. Herden (by phone) will be pleased to assist you. We are happy to provide you with a financing offer upon request. We are the official sales and service partner for: - Westtech - Magni telehandlers - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete range of DMS products! Errors and prior sale excepted. = More information = Intended use: Construction For more information, please contact Marius Herden.

Stanje: novo, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). DMS SG22090 Selector Grab / incl. Rotator / new unit / in stock & immediately available / incl. teeth (bolt-on) Price: €18,590.00 net / €22,122.10 gross - Shell width: 900 mm - Volume: 542 L - Weight (without rotator): 897 kg - Rotator weight: 168 kg - Operating pressure: 320 bar - Closing force: 52 kN - Torque: 4,200 Nm - Opening width: 1,900 mm - Excavator class: 17 – 22 t Optional: - Softgrip XL Set: €3,120.00 net - MS10 adapter plate: €2,645.00 net - MS21 adapter plate: €3,185.00 net - OilQuick OQ 70/55 adapter plate (currently mounted): €5,790.00 net We have many more DMS grabs in stock and available for immediate delivery! Mr. Herden (phone) will be happy to assist you. We will gladly provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - Magni telehandlers - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - JCB construction machinery - Mercedes-Benz Hjdpfoykhtlox Anmel - Iveco With over 800 used vehicles, we are also one of Germany’s largest commercial vehicle dealers. We supply the complete DMS program for you! Errors and prior sale excepted! = More Information = Intended use: Construction Please contact Marius Herden for further information.

Stanje: novo, For inquiries about the attachment, Mr. Herden will be happy to assist you (via phone). DMS SG18070 Sorting Grab / incl. Rotator / New device / In stock & immediately available / incl. Bolt-on teeth Price: €16,990 net / €20,218.10 gross - Shell width: 700 mm - Capacity: 384 L - Weight (without rotator): 728 kg - Rotator weight: 164 kg - Operating pressure: 320 bar - Closing force: 50 kN - Torque: 4,200 Nm - Opening width: 1,926 mm - Excavator class: 11 - 18 t Optional: - Softgrip XL set: €3,120 net - MS10 adapter plate: €2,645 net - MS21 adapter plate: €3,185 net We have many more DMS grabs in stock and immediately available! Mr. Herden (phone) is happy to assist you. Upon request, we would also be pleased to provide a financing offer. We are an official sales and service partner for Westtech. We are an official sales and service partner for Magni telehandlers. Hodpfoykhr Ujx Anmel We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB Construction Machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Moreover, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS range for you! Errors and prior sale excepted! = Further information = Intended use: Construction Contact Marius Herden for further details.

Stanje: novo, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). DMS SG12060 incl. Rotator Clamshell Bucket / Sorting Grab / NEW / in stock & immediately available / incl. bolt-on teeth Price: €14,890.00 net / €17,719.10 gross - Shell width: 600 mm - Capacity: 251 L - Weight (without rotator): 642 kg - Rotator weight: 88 kg - Operating pressure: 320 bar - Closing force: 46 kN - Torque: 4,200 Nm - Opening width: 1,830 mm Hodpfx Anjykhr Ismol Optional: - MS08 adapter plate: €865.00 net - MS10 adapter plate: €2,645.00 net - Softgrip XL set: €3,120.00 net We have many more DMS grabs in stock and immediately available! Mr. Herden (Tel. ...) will be happy to assist you. We are happy to provide you with financing options upon request. We are an official sales and service partner for Westtech. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. In addition, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS range for you! Subject to errors and prior sale! = More Information = Application: Construction Please contact Marius Herden for further information.

Stanje: novo, For inquiries regarding the attachment, please contact Mr. Herden (by phone) for assistance. DMS SG6040 Sorting Grab with Rotator / New unit / in stock & immediately available / incl. bolt-on teeth Price: €7,390.00 net / €8,794.10 gross - Shell width: 400 mm - Volume: 70 L - Weight (without rotator): 195 kg - Rotator weight: 52 kg - Operating pressure: 250 bar - Closing force: 20 kN - Torque: 2,500 Nm - Opening width: 1,205 mm - Excavator class: 3.5 – 6 t Optional: - Cutting edge set: €369.00 net Hedpjyi Rz Aefx Anmjl - Pipe grip set: €1,050.00 net - Soft grip set: €660.00 net - MS03 adapter plate: €540.00 net - MS08 adapter plate: €865.00 net We have many other DMS grabs in stock and (ready for) immediate delivery! Mr. Herden (Tel.) will be happy to assist you. Financing offers are available on request. We are an official sales and service partner for Westtech, Magni telehandlers, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., JCB construction machinery, Mercedes-Benz, and Iveco. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete DMS range for you! Subject to errors and prior sale! = More information = Intended use: Construction industry Please contact Marius Herden for further information.

Stanje: rabljeno, številka stroja/vozila: 545, Bucket package in TOP condition: - Ditch cleaning bucket, 2200 mm wide, with rotary actuator Hsdpfx Aei Ilt Nonmjl - Digging bucket, 1600 mm, with teeth - Digging bucket, 1200 mm, with cutting edge Including WINKELBAUER hydraulic quick coupler MultiConnect Suitable, among others, for Kobelco SK300 / SK350

Stanje: novo, Leto izdelave: 2024, dolžina zabojnika: 8 čevelj, barva: modra, lastna masa: 630 kg, prostornina tovornega prostora: 9,82 m³, širina tovornega prostora: 2.106 mm, dolžina tovornega prostora: 2.275 mm, višina nakladalnega prostora: 2.050 mm, ✔ SEA AND STORAGE CONTAINERS – all sizes & types, NEW & USED – Direct from the specialist! Nationwide transport within Germany (unloading not included) is already included in the stated price. Container Dimensions: - External dimensions (LxWxH): 2,438 x 2,200 x 2,260 mm - Internal dimensions (LxWxH): 2,275 x 2,106 x 2,050 mm - Door opening (WxH): 2,070 mm x 1,945 mm - Tare weight: 630 kg - Loading volume: 9.82 m³ - Forklift pocket spacing (center-to-center): 950 mm - Clear forklift pocket dimensions (WxH): 355 x 105 mm Load Ratings: - Max. payload: 3,500 kg - Max. floor load: 750 kg/m² - Max. lifting payload at 1.5g: 2,300 kg - Max. stacking weight: 6,500 kg - Max. point load (roof center, 30x30cm): 150 kg - Stackable: up to 3 empty units Corner Castings: - Welded container corners, external dimensions according to ISO standard, thickness 6 mm Roof: Frame construction: - Welded steel profiles, 2.5 or 3 mm thick - Weather lip on front roof beam Covering: - Self-supporting, corrugated steel sheet, 1.2 mm thick Corner Posts: Hjdevf H Hcjpfx Anmol - Front corner posts: 3 mm steel profile - Rear corner posts: 2 mm steel profile Walls: - Vertically corrugated steel sheet, 1.2 mm thick - 4 forced ventilation openings below the roof frame Floor: Frame construction: - Welded steel profiles, 2 to 3 mm thick transverse beams made from U-profiles Forklift pockets: - Steel profiles, 2.5 mm thick Wooden floor: - Coated laminated plywood, 21 mm thick - Water-resistant - Sealed with elastic sealing compound Doors: - Double-leaf door, with all-round special rubber seal - Opening angle approx. 270° Cladding: - Horizontally corrugated steel sheet, 1.2 mm thick Locking: - Special locking mechanisms - Made from galvanized tube and retaining angles, with integrated plastic slide bushings Hinges: - Welded onto door leaf using galvanized and forged hinges Painting: - Eco-friendly, multi-layer coating system with high weather resistance Surface preparation: - Degreasing and zinc phosphating by immersion Primer: - Cathodic dip coating, average thickness 20 µm Top coat (exterior): - High-quality polyester powder coating, av. thickness 70 µm - Interior colour: RAL7035 Light Grey Options: - Paintwork according to CTX-RAL chart - Steel checker plate floor 3 + 1 mm - CTX anti-theft protection - Security package - Electrical installation - 2nd double-leaf door on front side - Sectional door - Window (incl. window grilles) - Personnel door 875 x 2,125 mm - Shelving - Air vent grilles CONTAINER APPLICATIONS: - Additional storage capacity - Material and tool storage - Temporary moving storage - Workshops - Technical rooms and much more. OUR SERVICES: - Container sales: all sizes and types / new and used - Europe-wide delivery by truck / side loader / rail / inland vessel - International forwarding by sea freight - Container repair - Container modification - Container accessories and spare parts All prices are plus VAT. We would be pleased to hear from you. If you have any questions, please do not hesitate to contact us. # Container trade sea containers storage containers overseas containers high cube containers material containers magazine containers site containers construction containers steel containers bar containers kiosk containers workshop containers event containers moving containers archive containers

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 profile 30.0: * EBS brake system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle load equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Closed plastic mudguards on the front axle and straight galvanized steel fenders at the rear axle, each with spray protection * Reflective contour marking tape on the sides and rear * Foldable lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 15-pin power plug * Four stake pockets on each side (however, no stakes included) with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and integrated into the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear taper) * Widening planks stored in the middle of the loading area * Excavator boom rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator boom rest) * One-piece hydraulic ramps (approx. 3,000 x 720 mm) * 4-way control block for subsequent retrofitting of hydraulic ramp shift * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, and ramps hot-dip galvanized Hjdpfol Thxdsx Anmel * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technical GVW of 30,000 kg possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 18/2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle: enclosed plastic mudguards; rear axle: straight galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Foldable galvanized lid for tool box on turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle Hodel Th Adepfx Anmjl * 15-pin power socket * Four stake pockets per side (stakes not included), each suitable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV folding and lowerable lashing rings (loadable in all directions and recessed in external frame – in corners 13.4 t, otherwise 10 t) * 6 pairs of mechanical folding outriggers for up to 3 m total width (not in rear taper) * Widening planks stored in the center of the loading platform * Digger arm support over rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings laterally in the digger arm support) * Single-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * 4-section valve block for retrofitting hydraulic ramp lateral adjustment * Mechanical lateral ramp shift * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Gross weight of 30,000 kg technically feasible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from CW 18/2026

Stanje: novo, največja dovoljena obremenitev: 31.100 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.410 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.520 mm, Gross weight: 24,000kg / 40,000kg Curb weight: 8,900kg Payload: 15,100kg / 31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm gooseneck, 7,920mm loading deck including rear bevel Width: 2,520mm Loading height: 900mm Further information: plus pre-carriage / provision ex stock location 26639 Wiesmoor: €1,280.00 net Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Foldable rear support Wheel chocks with holder Aluminium side underrun protection Rear mudflaps across the full width (not in combination with forklift holder) Half-shell fenders on 1st and 2nd axles with anti-spray mudflaps behind each axle Anti-spray mudflaps in front of and behind 3rd and 4th axles Excavator arm recess over rear axles to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t each) in the excavator recess at the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the rear bevel 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm Extendable width to 3,000 mm (not in rear bevel) (Track width of machines/vehicles to be transported must not exceed outer frame width of 2,550 mm) Storage compartment for timber planks under low-bed platform 70 mm timber for widening to 3,000 mm Low loader lashing eyes 1 pair of lashing cut-outs at the front longitudinal member in gooseneck, each rated 10 t 4 pairs of lashing holes in the outer frame, each 5 t (lashing strap attachment) 9 pairs of recessed lashing mushrooms in the outer frame, top and side, each 10 t 2 x front on gooseneck 7 x in lowered bed First lashing eye 250 mm from the front, last max. 250 mm from the rear, spacing not greater than 1,100 mm 3 pairs of additional folding lashing eyes, each 10 t: 1 x on gooseneck (protrudes) 1 x at beginning of low bed, recessed in longitudinal rails 1 x behind the last axle, recessed in the floor Trailer tow device Drawbar with certified 50 mm towing eye Hjdpferducpsx Anmol Drawbar height adjustable by spring Axles & suspension Drum brake axles, manufacturer's choice Axles/chassis laser aligned—reduces tire and fuel wear Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation front and rear (equalisation rocking beams) Wheels and tires 235/75 R 17.5" manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake 2 foolproof coupling heads at the front with connection leads to tractor unit 24 Volt ABS and ALB, with ABS connector at front, with connecting cable Note: The trailer may only be towed by tractors supporting ABS function! Electrics 12–24 volt, multi-chamber LED lamps, side yellow LED marker lights, LED license plate lights (note: some tractors may show false diagnostics despite correct function) 2 white position lights at the front, LED 2 white/red lane marker lights at the rear, LED 2 x 7-pin foolproof connectors at the front, with connecting cable 1 LED beacon with holder, switched via position light (removable beacon) 2 pairs of warning plates, double LED illuminated and extendable to 3,000mm Floor Gooseneck front with steel/checker plate covering then approx. 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear bevel with 70 mm softwood floor A

Stanje: novo, Leto izdelave: 2024, dolžina zabojnika: 10 čevelj, barva: modra, lastna masa: 825 kg, prostornina tovornega prostora: 15,76 m³, širina tovornega prostora: 2.344 mm, dolžina tovornega prostora: 2.831 mm, višina nakladalnega prostora: 2.376 mm, ✔ STORAGE CONTAINERS OF ALL SIZES & TYPES, NEW & USED – DIRECT FROM THE SPECIALIST! Transport within Germany, excluding unloading, is already included in the listed price. Container Specifications: - External dimensions (LxWxH): 2,991 x 2,438 x 2,591 mm - Internal dimensions (LxWxH): 2,831 x 2,344 x 2,376 mm - Door opening (WxH): 2,310 mm x 2,280 mm - Tare weight: 825 kg - Capacity: 15.76 m³ - Fork pocket spacing (center to center): 950 mm - Clearance (WxH): 355x105 mm Load Capacity: - Max. payload: 10,000 kg - Max. point floor load: 1,500 kg/m² - Max. lifting payload at 1.5g: 3,350 kg - Max. stacking weight: 9,500 kg - Max. roof center point load (30x30cm): 150 kg - Stackable: Up to 3 units empty Corner Castings: - Welded container corners, external dimensions according to ISO standard, 6 mm thick Roof: Frame construction: - Welded steel profiles, 2.5 and 3 mm thick - Weather lip on the front roof beam Covering: - Self-supporting, cross-corrugated steel sheet, 1.2 mm thick Corner Posts: - Front corner post: 3 mm thick steel profile - Rear corner post: 2 mm thick steel profile Walls: - Vertically corrugated steel sheet, 1.2 mm thick - 4 forced ventilation openings arranged under the roof frame Floor: Frame construction: - Welded steel profiles, 2 to 3 mm thick, transverse floor beams in U-profile Fork pockets: - Steel profiles, 2.5 mm thick Wooden floor: - Coated plywood panels, 21 mm thick - Water-resistant - Sealed with elastic sealing compound Doors: Hedpfx Ansvf Hrfsmjl - Double-wing door with all-round special rubber seal - Opening radius approx. 270° Cladding: - Horizontally corrugated steel sheet, 1.2 mm thick Locking: - Special locking mechanisms made from galvanized tubing and holding brackets, with integrated plastic sliding bushings Fastening: - Hinges galvanized and forged, welded to the door leaf Paintwork: - Environmentally friendly combined coating system with high weather resistance Pre-treatment: - Degreasing and zinc phosphating via immersion process Primer: - Cathodic dip coating, average layer thickness 20 µm Top coat (outside): - High-quality polyester-based powder coating, average layer thickness 70 µm - Interior color: RAL7035 Light Grey Options: - Paint as per CTX-RAL chart - Floor: checkered steel plate 3+1 mm - CTX anti-burglary protection - Security package - Electrical installation - Second double-wing door at end face - Sectional door - Window (incl. window grille) - Personnel door 875 x 2,125 mm - Shelving - Ventilation grille CONTAINER APPLICATION AREAS: - Additional storage capacity - Material and tool storage - Temporary storage for relocations - Workshops - Technical rooms - And much more OUR SERVICES: - Container sales: all sizes and types / new and used - Europe-wide delivery by truck / sideloader / rail / inland vessel - International freight forwarding by sea - Container repair - Container modification - Container accessories and spare parts All prices are exclusive of VAT. We look forward to hearing from you. If you have any questions, please do not hesitate to contact us.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, For sale is a new tipper trailer (rear tipper) designed for professional use in construction, commercial, and transport sectors. The trailer stands out thanks to its robust construction, hydraulic tipping function, and versatile application possibilities – ideal for bulk materials, equipment, and construction site materials. 🔧 Technical Data: • Design: Rear tipper • Permissible gross weight: 1,350 kg • Payload: approx. 942 kg • Axles: 1 • Braked: Yes • Tyres: 13 inch • Internal dimensions (L x W x H): 256 x 148 x 30 cm • Side wall height: 30 cm • Loading floor: Steel plate • Tipping function: Hydraulic (operated manually) ✅ Features & Specifications: • Robust welded and hot-dip galvanized chassis • Solid V-drawbar, hot-dip galvanized • Hydraulic tipping function for convenient unloading • All four side walls foldable and removable • Detachable corner posts for maximum flexibility • Flat steel loading floor for easy loading (also via forklift) • Lashing points at the corners for secure load securing • Multifunctional lighting mounted protected under the side walls • Automatically folding jockey wheel (Ø 60) as standard 👍 Benefits: • Ideal for bulk materials, soil, gravel, wood, and construction site material • Highly flexible due to fully opening side walls • High stability thanks to professional welded construction • Fast and easy unloading thanks to tipping function • Versatile for everyday commercial use 📦 Availability: • Brand new • Ready for delivery within a few weeks • Short-term delivery possible (subject to availability) 📍 Collection & Delivery: Hodpsy Dtrzsfx Anmol • Collection in 29690 Buchholz (Aller) possible • Nationwide delivery in Germany upon request Your Globaltainer Team

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 3.740 h, Oprema: pogon na vsa štiri kolesa, Nastavljiva roka, hidravlični S.W. sistem, nihalna žlica 1480 mm, 2x izkopni žlici cca 550 + 290 mm, upravljanje za kladivo in grabilko, vzvratna kamera, vozilo je lahko polepljeno in/ali označeno z oglaševanjem. SI85163 Naša ponudba je načeloma brez novega TÜV pregleda. Če želite nov TÜV pregled, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Veljajo naši splošni pogoji dobave in plačila. Za ta objekt vam z veseljem pripravimo ponudbo za financiranje ali leasing. Prosimo, kontaktirajte nas! Hjdpfxoxrxi Es Anmel

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 14.695 h, Oprema: pogon na vsa štiri kolesa, WhatsApp: _____ Hyundai HL965/HySW/40 km/h/Air conditioning/Central lubrication Manufacturer: Hyundai Model: HL965 Year of manufacture: 2019 Operating hours: 14,695 h Engine model: Cummins QSL9 Power: 203 kW / 276 HP All-wheel drive Differential lock ROPS/FOPS certified Rear-view camera 360° camera Air-suspended driver's seat Multi-function display ESC (Electronic Stability Control) Air conditioning Window ventilation Central lubrication system High and low gear Max. driving speed: 40 km/h Radio Total weight: 20,100 kg German machine Ready for immediate use Hodpfxoyq Uv He Anmel _____ You can also receive the description in another language by email. Our Services: - Export declaration – Customs clearance – Temporary (yellow) plates – Export (red) plates - Purchase of your used construction machinery or commercial vehicles - Assistance with financing - We offer transport solutions - Inspection and demonstration of the machines Monday to Friday, 9:00–17:00 (Saturday by appointment only) Our machinery inventory is constantly updated and always current on our website. We are also happy to assist you by phone. Sanisa GmbH Otto Hahn Straße 13 35510 Butzbach Tel.: Mobile: This offer is non-binding and subject to prior sale. Errors, omissions and typing mistakes excepted. Sale according to our terms and conditions (AGB).

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta prenosa: samodejen, vrsta goriva: dizel, obratovalna teža: 16.000 kg, velikost pnevmatike: 750/65 R26 BKT, stanje pnevmatik: 95 odstotek, stanje pogona: 95 odstotek, število sedežev: 1, Leto izdelave: 2023, obratovalne ure: 907 h, Oprema: UVV varnostni pregled, dodatne luči, kabina, klimatska naprava, pogon na vsa štiri kolesa, ZF osi 5-stopenjski ZF menjalnik Tehtnica ni primerna za overjanje Vzvratna kamera STVZO homologacija Centralno mazanje Beka Max Hsdpfx Ajyvicmjnmol Hitra menjava, združljiva z Volvom 3. hidravlični krog proporcionalno nastavljiv 2 monitorja LED osvetlitev Pnevmatike 750/65 R26 BKT Agrimax Radio z USB in Bluetooth Zračno vzmeten voznikov sedež

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 1.934 h, 2022 | Hyundai HL975A CVT | Used Wheel Loader | 1934 hours 📍Location: Germany 🚛 Delivery available to your location – Use our shipping calculator to estimate transport costs! 💰 Buy now for EUR 189,500 or make an offer. Payment upon delivery available for a small fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 56 inspection points: 49 approved ✅ 7 imperfections ℹ️ 0 issues ⚠️ 📌 Inspector’s comment: Fully functional and well-presented machine, slight play in the quick coupler and articulation pins, tires need replacement as they are in poor condition, some damage in various places as shown. 📄 Want to see the complete inspection report, extra photos, or a video? Tip: The reference "39199 Equippo" is commonly used for searching detailed information online. Hsdjyq H Saopfx Anmol 💡 Why choose this machine and our service: ✔ Professionally inspected in detail ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Safe and flexible payment methods 🔄 Considering other equipment? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 4.219 h, 2015 | Hyundai HL730-9A | Used Wheel Loader | 4219 Betriebsstunden 📍Standort: Frankreich Hjdpfeywztmjx Anmjl 🚛 Lieferung an Ihren Zielort verfügbar – Nutzen Sie unseren Versandkostenrechner zur Schätzung der Transportkosten! 💰 Sofortkauf für 35.400 EUR oder machen Sie ein Angebot. Zahlung bei Lieferung gegen eine geringe Gebühr möglich (vorbehaltlich Genehmigung)* 👷‍♂️ Unabhängige Begutachtung durch einen externen Experten 54 Inspektionspunkte: 48 genehmigt ✅ 6 mit Mängeln ℹ️ 0 schwerwiegende Probleme ⚠️ 📌 Kommentar des Inspektors: 4 neue Reifen. Die Sicht über die Kameras ist eingeschränkt. Die Schaufel wurde instandgesetzt (geschweißt und neu lackiert). 📄 Möchten Sie den vollständigen Prüfbericht, weitere Fotos oder ein Video sehen? Hinweis: Die Referenz "39531 Equippo" wird häufig zur Online-Recherche verwendet. 💡 Warum diese Maschine und unser Service überzeugen: ✔ Fachgerechte, detaillierte Inspektion ✔ Baustellenzustellung möglich ✔ Geld-zurück-Garantie ✔ Sichere und flexible Zahlungsoptionen 🔄 Suchen Sie andere Maschinen? Wir bieten hilfreiche Tools und Ressourcen für sämtliche Maschinenbesitzer und -bediener – einfach auf unserer Plattform zugänglich.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, obratovalna teža: 15.500 kg, velikost pnevmatike: 20.5-25, stanje pnevmatik: 95 odstotek, stanje pogona: 100 odstotek, prostornina žlice: 3 m³, širina izkopne žlice: 2.750 mm, Leto izdelave: 2021, obratovalne ure: 1.550 h, Oprema: UVV varnostni pregled, dodatne luči, kabina, klimatska naprava, pogon na vsa štiri kolesa, Stroj zelo dobro vzdrževan Hedpfxoygwukj Anmol Žlica z vijačeno obračalno rezilom 3 m³ Centralni sistem mazanja Pfreundt tehtnica WK60 s tiskalnikom Zračno vzmeten voznikov sedež StVZO odobritev v Nemčiji Klimatska naprava Radio z Bluetooth prostoročno funkcijo CB radio Utripajoča luč zadaj Pnevmatike skoraj nove

Stanje: rabljeno, moč: 130 kW (176,75 KM), vrsta goriva: dizel, Leto izdelave: 2015, obratovalne ure: 12.419 h, Hyundai HL 730-9A. Leto izdelave: 2015. Delovne ure: 12.419. Teža: 10.500 kg. Stroj s CE certifikatom. 130 kW. 3. hidravlična funkcija. Največja hitrost: 40 KMH. Kamera. Klimatska naprava. Joystick. 1 žlica. Pnevmatike: 17.5R25, 30% profila. Nemški stroj! ID ŠT.: 85. Na vse oglase, ponudbe in ponudbene predloge podjetja Heinhuis, vse pogodbe, sklenjene s podjetjem Heinhuis ter predhodna pogajanja, veljajo Splošni pogoji poslovanja podjetja Heinhuis. S kakršnokoli obliko odziva sprejmete uporabo Splošnih pogojev podjetja Heinhuis in potrjujete, da ste se z njimi seznanili. Naše cene so izvozne neto cene. Hsdpfxoylpgij Anmel = Dodatne informacije = Leto izdelave: 2015 Lastna teža: 10.500 kg CE certifikat: da Referenčna številka: 85 = Podatki podjetja = Za več informacij: WhatsApp:

Stanje: rabljeno, prva registracija: 06/2016, Leto izdelave: 2016, obratovalne ure: 9.837 h, HYUNDAI HL 730-9 A čelni nakladač z mulčerjem in preklopno žlico, s klimatsko avtomatiko. • Pogona na vsa kolesa (4x4) • Leto izdelave: 2016 Hedpfx Ajwmpfpsnmol • Delovne ure: 9.835 • cca. 27.000 km Dodatna oprema: • Mulcherska grabilna/ preklopna žlica • Volumen žlice: 2 m³ • Moč (kW/KS): 100 / 136 • Delovna teža: 10.500 kg • Skupna teža: 15.500 kg • Zadnji varnostni pregled: 14.11.2022 Druga oprema: • Klimatska avtomatika • Kamera za vzvratno vožnjo • CD-radio • Udoben sedež • Avtomatski / pretvornik menjalnik - Nemški stroj, vedno redno vzdrževan / vsi servisi opravljeni v pooblaščeni delavnici!! - Prva roka! - Pripravljen za uporabo! Možne napake in vmesna prodaja!

Stanje: novo, lastna masa: 6.700 kg, največja dovoljena obremenitev: 25.300 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 25 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, stanje pnevmatik: 100 odstotek, Oprema: ABS, | Schwarzmüller K-serija 2-osni kiper | Prostornina: cca 25m³ | ABS / EBS | 9 t SAF osi z disk zavorami | Popolno zračno vzmetenje | Pnevmatske gume: 385/65 R 22,5 | Jeklena okrogla kesonska nadgradnja | Sprednja delovna ploščad | Lastna masa 6.700 kg | Drsna ponjava Hodpfx Ansywywqomol