Fliegl Tts 100 Tandem 5,5 M Tiefbett Anhänger 101 nakup rabljenega (48.134)

Stanje: rabljeno, lastna masa: 3.690 kg, največja dovoljena obremenitev: 9.810 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 09/2019, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.700 mm, prostornina tovornega prostora: 48 m³, vzmetenje: zrak, velikost pnevmatike: 285/70R19,5 148J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 285/70R19,5 148J, velikost zadnje pnevmatike: 285/70R19,5 148J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Lashing points, , -- Printing errors, mistakes and changes reserved, sample images --, More data at: !, More Details: ! Bodpfxjzf Iamo Amtoli

Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.500 mm, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, cargo area length: 6,500 mm. Tyre size: 235/75 R17.5. 1st axle: , 2nd axle: , 3rd axle: . Leaf suspension. 3-axle low-bed trailer with drop-bed DTS-S 300 - Turntable with robust ball bearing ring - Rear supports, foldable - 1 spare wheel carrier for 1 spare wheel, incl. wheel mounting kit - 1 spare wheel, same brand and type as main tyres, steel rim - 1 plastic toolbox - Extendable load width up to 3,000 mm (not in rear slope) - Storage compartment for timber planks in the centre of the low-bed platform - Timber planks, 70 mm, for widening to 3,000 mm Tie-down points on low-bed: - with spring-loaded lifting aid Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Braking system: - Dual-line compressed air brake system - Spring-loaded parking brake Electrics: - 24 Volt, multi-chamber lights, yellow LED side lights - 1 LED beacon with mounting bracket, controlled via parking light (removable beacon) - 2 pairs of warning boards, double LED illuminated, extendable to 3,000 mm Floor: - Storage box recessed into drive-up angle at the drop bed - Then 70 mm softwood floor, steel/chequer plate covering in wheel arch area - Rear slope with 70 mm softwood floor Ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, covered with wood - 1 pair of ring lashing eyes recessed front in drop bed, 10 t - 4 pairs of lashing holes in rear area, 5 t each for tensioning strap hooks - 7 pairs of lashing points recessed top and side in outer frame, 10 t each (1 x front in drop bed, 6 x in low bed) Bledpfstcwkrox Amtei - 5 pairs of stanchion pockets recessed in outer frame, inside 70 x 40 mm (convertible to 5 t ring lashing eyes for extra cost) - 2 additional pairs of folding lashing eyes, 10 t each, 1 x front in drop bed, 1 x behind 3rd axle Axles + suspension: - SAF - Drum brake axles - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalisation

Stanje: rabljeno, lastna masa: 5.300 kg, največja dovoljena obremenitev: 12.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2010, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.900 mm, prostornina tovornega prostora: 52 m³, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 ---/141J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 ---/141J, velikost zadnje pnevmatike: 235/75R17,5 ---/141J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Lashing eyes, -- Typographical errors, mistakes and changes excepted, sample images --, More data at: !, More details: ! Bedpfezhk E Rsx Amteli

Stanje: rabljeno, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2012, Oprema: ABS, *Tautliner *Sistem skozi-nalaganja *Pnevmatike 385/65R22,5 *3 vrste aluminijastih letvic *Zračno vzmetenje z uravnavanjem višine Bsdpfxsypa Ewj Amteli Vse informacije brez jamstva!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.200 kg, največja dovoljena obremenitev: 16.800 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, skupna dolžina: 7.200 mm, skupna širina: 2.550 mm, skupna višina: 1.800 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema potekata individualno po željah kupca. Podvozje – kiper prikolica s centralno osjo Varjena jeklena konstrukcija, neprekinjena nagibna os na zadnjem delu s 100 mm krogličnim ležiščem Tip 210, tehnična skupna masa 21.000 kg (potrebno posebno dovoljenje) Nosilna noga z menjalnikom spredaj Zložljivo zadnje podpiralo 2 zagozdi za kolesa z nosilcem Jekleni podnaletni zaščitni sistem Zadnje brizgalne zaščite po celotni širini (ne v kombinaciji z nosilcem za viličar) Četrtinski blatniki pred in za vsako osjo 1 plastična orodjarna, širina 600 mm / višina 425 mm / globina 460 mm, zaklepna 1 par aluminijastih ramp, dolžina 3440 mm, širina 360 mm, nosilnost na par 8000 kg (nosilna letev za rampe zadaj) Vlečna naprava centralnoosne prikolice Vlečna gred s certificirano 50 mm vlečno uho Osi in vzmetenje BPW diskaste zavorne osi "Lasersko merjenje osi/podvozja" – zmanjšuje obrabo pnevmatik in porabo goriva Razdalja med osmi 1810 mm (tehnična osna obremenitev 10 t) Zračno vzmetenje Zavorni sistem Dvocevni pnevmatski zavorni sistem Barvno označene cevi za enostavno servisiranje Parkirna zavora s povratno vzmetjo 2 zanesljiva priključna nastavka spredaj, z povezovalnimi cevmi do vlečnega vozila 24V EBS (elektronski zavorni sistem) s sprednjim priključkom in povezovalnim kablom Pozor: Priklopno vozilo se lahko vleče le z vlečnim vozilom, ki zagotavlja delovanje ABS! Ventil za dviganje in spuščanje Stabilizacijski sistem vozila Prepoznavanje osne obremenitve prek Canbus signala EBS, za prikaz na zaslonu v kabini voznika, tovornjak mora biti ustrezno pripravljen, brez vgradnje v tovornjak (ni utežene tehtnice) Kolesa in pnevmatike 435/50 R19,5", proizvajalec po izbiri proizvajalca Pnevmatike z oznako 164 K ali J, po izbiri proizvajalca Jeklena platišča, tovarniška srebrna Elektrika 24 V, večkomorne luči, bočna rumena LED osvetlitev 2 beli LED pozicijski luči spredaj 2 bela/rdeča markacijska luč zadaj 2 x 7-polni zanesljivi vtiči spredaj s povezovalnim kablom 1 dodatni LED delovni žaromet zadaj, vklop preko vzvratne luči Hidravlika Tristranski kiper, hidravlična več-batna stiskalnica z omejevalnikom dviga in varovalno vrvjo, Nizkotlačni valj do max. 170 bar, brez dušilke. Po potrebi se dušilka vgradi na tovornjak. (Tovornjak z max. hidravličnim pretokom do 55 l/min) Upravljanje hidravličnega sistema preko pomožnega pogona tovornjaka Hidravlična spojka s SVK-priključkom NW 10/3, vklj. s povezovalno cevjo Kiparska korita Dno iz jeklene pločevine Hardox 450, debeline 4 mm, zadnje kroglično ležišče premera 100 mm Nadgradnja iz jekla, stranske stene preklopne in nihajno vpetje s centralnim zaklepom spodaj Zadnja stena kot nihajna in kot dvokrilna vrata (ni preklopna), z nosilcem za vrata ter bočno zaščitno gumo (ne v kombinaciji s stranicami za zelje ali mrežastim nadstavkom) Vzmet za povratek stranskih sten (ni možno pri preklopni čelni steni) Širina kiper korita: 2420 mm 5 parov varovalnih obročev v tleh, po 5 t po paru Barvanje Stranske stene/kiper korito lakirani v barvi po želji Bjdpfjzd Eynox Amtsli Rešitev transporta po meri Konfigurirajte svoje Fliegl vozilo po vaših zahtevah. Prikazano vozilo je primer. Proizvodnja in oprema sta individualno prilagojeni naročniku.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3.650 kg, največja dovoljena obremenitev: 9.850 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 450 mm, skupna dolžina: 6.900 mm, skupna širina: 2.550 mm, skupna višina: 1.680 mm, vzmetenje: jeklo, velikost pnevmatike: 285/70 R19,5", stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta izvedeni individualno po željah stranke. Šasija centralnoosnega kiper priklopnika Varjena konstrukcija iz jekla, neprekinjena kiperska os na zadku z 80 mm sferičnim ležiščem za kipanje Podporna noga z menjalnikom spredaj Zložljiva zadnja podpora 2 zagozdi z nosilcem Podvozna zaščita iz jekla Zadnji blatniki čez celotno širino Četrtinski blatniki Zaklenljiv shranjevalni prostor za naletne rampe pod tovorno površino 1 plastična orodjarna s polico, b=620/v=360/g=440 mm, zaklepanje z obešanko Opomba! Spuščena stranica se dotika zaboja za shranjevanje. Zaklenljiv shranjevalni prostor za naletne rampe pod tovorno površino Priklopna oprema centralnoosnega priklopnika Priklopna gred s preizkušeno 40 mm vlečno ušeso Priklopna gred nastavljiva po višini s pomočjo vretena, največji razpon nastavljanja 300 mm Osi in vzmetenje SAF bobnaste zavorne osi "Laser izmerjeno podvozje/os" – zmanjša obrabo pnevmatik in porabo goriva Parabolično vzmetenje z vzdrževanjem prostimi gumijasto-jeklenimi ležišči in mehanskim izravnavanjem osnih obremenitev (vzvojno izravnavanje) Bledjzd D Scjpfx Amtji Kolesa in pnevmatike 285 / 70 R 19,5" izbira proizvajalca Jeklena platišča, tovarniško srebrna Zavorni sistem Dvocevni pnevmatski zavorni sistem Vzmetna, parkirna zavora 2 nezaželjeni priključni glavi spredaj z povezovalnimi cevmi do vlečnega vozila, ABS in ALB, s priključkom ABS spredaj, vključno s povezovalnim kablom Pozor: Priklopnik sme vleči le vozilo, ki zagotavlja pravilno delovanje ABS! Elektrika 24 V, večkomorni žarometi, stranske rumene LED luči 2 sprednji beli pozicijski luči 2 zadnji bele/rdeče označevalne luči 2 x 7-pinski nezaželeni vtičnici spredaj, s povezovalnim kablom Hidravlika Trosmerno kiperno ogrodje, večbatna hidravlična stiskalnica z omejevalnikom dviga in varnostno vrvjo, nizkotlačni cilinder do maks. 170 bar, brez dušilke. Po potrebi je treba to dograditi na tovornjak. Upravljanje hidravlike preko dodatnega pogona na tovornjaku Hidravlični priključek s SVK-vtičem NW 10/3, vključno s povezovalno cevjo Kiparska konstrukcija Močna kiper konstrukcija z 4 mm jekleno ploščo, stranske stene jeklene, skozi cele, zložljive in nihajne z osrednjim spodnjim zaklepanjem. Zadnji kotni stebrički odstranljivi. Zadnja stranica zložljiva in nihajna z osrednjim spodnjim zaklepanjem. Dolžina kesona cca 5.000 mm, stranske stene z 6 tečaji spodaj. Vzmeti za vračanje stranic Širina kesona 2.420 mm 5 parov pritrdilnih ušes v tleh, vsaka 5 t Navodila za uporabo Navedena skupna masa je tehnično možna, glede na tovor pa morda ne bo mogoče doseči dovoljene skupne mase ob upoštevanju dovoljenih obremenitev osi/podpore/sedežev Država registracije/Tablice Država registracije: Nemčija z DA Dekra (potrdilo po §13 EG - FGV) 24/7 servisna linija pripravljeno za enovrstni držalo za registrsko tablico Označevanje z odsevnimi trakovi v skladu z ECE R 048, belo ob strani in rdeče zadaj Barvanje Okvir – vroče cinkan, vključno s pasivacijo "15 let jamstva proti prerjavenju" Stranice/ogradje – barvano po izbiri barve Rešitev transporta po meri.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 7.500 kg, največja dovoljena obremenitev: 18.700 kg, skupna masa: 26.200 kg, konfiguracija osi: 2 osi, skupna dolžina: 12.400 mm, skupna širina: 2.550 mm, velikost pnevmatike: 205 / 65 r 17,5, Further Information Chassis: Semitrailer Logistics Fine-grained steel welded construction, fifth wheel plate with interchangeable 2-inch kingpin, rear bevel approx. 1920 mm, continuous ramp hanging bar at the rear and at the front of the gooseneck, ground rollers at the rear, lowered deck (deep bed) after the step-down up to the axle assembly. Drawing release from the customer required upon order! Pair of lashing mushroom pins recessed on top and side in the outer frame, each rated for 10t Pair of lashing eyes recessed in the outer frame on the gooseneck, each rated for 5t 24t two-speed landing gear, single-sided operation, with straight lower part, without compensating plate Foldable rear support, mounted externally Wheel chocks with holder Side underrun protection – aluminum Rear underrun protection – steel, for EU, where technically possible Quarter-shell mudguards Bsdpfoi Ri Hrjx Amteli With anti-spray mudflaps according to EU regulations 1 pair of wheel recesses recessed after the gooseneck in the deep-bed lane area, sloped for easier entry. Bottom length approx. 1840 mm, recess depth approx. 200 mm. Second pair of wheel recesses at rear bevel. Depth approx. 200 mm. Note! Frame in the main beam area is 200 mm higher than the wheel recess. Detailed technical inspection required upon order. Removable wheel recess covers from the deep bed with hardwood inlays, at rear bevel with hardwood inlays. Electric cable winch, 24 volts, pulling force 5500 kg, mounted in the gooseneck step-down, does not reach into load area, operated by remote control, cable length 35 m × approx. 10 mm, with roller fairlead and detachable guide roller at the rear bevel. Axles & Suspension SAF or BPW drum brake axles at our discretion Air suspension with raise & lower valve + auto-reset function Wheels and Tires 205/65 R 17.5 tires with 129/127K (132/132G) rating for 8t tire load capacity at max. 90 km/h, preference of manufacturer Steel twin wheels, factory silver Brake System 2-line compressed air brake system Spring-actuated parking brake 2 interchangeable coupling heads at front, without connecting line EBS by Haldex, electronic braking system with EBS socket at front, without connecting cable (brake calculation sent to customer for approval, 15.07.2021) Attention: The trailer may only be towed by tractor units that ensure ABS effectiveness! Axle load detection via EBS CAN bus signal, display in the driver’s cab possible (truck must be properly prepared, not installed, not a calibrated scale) Electrics 24 volts multi-chamber rear lights, lateral yellow LED lights 2 white position lights at front 2 white/red outline marker lights at rear 2 × 7-pin and 1 × 15-pin interchangeable sockets at front, without connecting cable Floor Gooseneck with steel/checker plate covering 30 mm phenolic resin plywood floor, in deep bed between main rails In the drive lane area with serrated grating, in wheel recesses with steel/checker plate covering Ramps Pair of aluminum ramps, 3,200 mm long, load capacity 12,000 kg per pair Pair of steel ramps for entry into deep bed Pair of steel ramps for crossing gooseneck Sidewalls Approval / Signage Registration country: Germany With DEKRA inspection and certificate (according to §13 EC-FGV) Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, yellow at sides and red at rear Warning plate as per ECE-70 Paintwork Frame painted RAL 9018 Papyrus White Support feet coated black Attention: Archive ima

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT21201012268, lastna masa: 3.240 kg, največja dovoljena obremenitev: 8.560 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, prva registracija: 05/2022, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, skupna dolžina: 6.900 mm, skupna širina: 2.550 mm, skupna višina: 950 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", barva: zelen, Slike so arhivske. Vozilo je lahko še v uporabi! Jeklena varjena konstrukcija, neprekinjena nagibna os zadaj z 80 mm ležaji s kroglami, nosilna noga z menjalnikom spredaj, zložljiva zadnja opora, zagozde za kolesa z nosilcem, jeklena zaščita proti podletu, zadnje blatnike čez celotno širino (ni v kombinaciji z nosilcem za viličarje), četrtinski blatniki, rezervno kolo enakega proizvajalca kot osnovna oprema, jeklena platišča, ločeno, plastična orodjarna z vstavnim dnom, širina 620 mm / višina 360 mm / globina 440 mm, zaklepanje s predvideno obešanko (ključavnica ni vključena v dobavo). Opomba: Stranska stena se v preklopljenem stanju dotika zaboja. Zaklenjen shranjevalni prostor za nalivne rampe pod nakladalno površino, par aluminijastih ramp, dolžina 3000 mm, širina 360 mm, nosilnost na par 8000 kg (pritrdilna letva za rampe zadaj). Vlečna gred s preizkušeno vlečno očesno 40 mm, po višini nastavljiva preko vretena, največji obseg nastavitve 300 mm. BPW bobnaste zavorne osi, osi/vozilo lasersko izmerjene za zmanjšanje obrabe pnevmatik in porabe goriva, parabolične vzmeti z vzdrževanje prostimi jekleno-gumijastimi ležišči in mehanskim izravnavanjem obremenitev osi (nihanje). Dvokrožni zračni zavorni sistem, barvno kodirane cevi za lažje servisiranje, ročna parkirna zavora z vretenom. Integralni zračni rezervoar, ABS in ALB, z ABS vtičem spredaj, s povezovalnim kablom. Pozor: Prikolica sme biti vlečena samo z vozili, ki zagotavljajo delovanje ABS. Duomatic priključek spredaj, s povezovalno cevjo do vlečnega vozila. 24 voltna, večkomorna svetila, bočno rumene LED luči, 2 beli pozicijski luči spredaj, 2 belo/rdeči opozorilni luči zadaj, 1 x 15-polni vtič spredaj s povezovalnim kablom. Trosmerni kiper, hidravlična večbatna črpalka z omejevalnikom hoda in varovalno jeklenico, nizkotlačni cilinder do največ 170 bar, brez dušilca (po potrebi naknadno vgradnja na tovornjak). Hidravlični priključek s SVK vtičem NW 10/3, vključno s povezovalno cevjo, upravljanje hidravlično prek pomožnega pogona tovornjaka. Robusten kiper most s 4 mm jeklenim dnom, nadgradnja s stranskimi jeklenimi stenami, stranske stene polne dolžine, zložljive in nihajne, spodaj centralno zaklepanje. Kotne zagozde zadaj snemljive. Zadnja stena zložljiva in nihajna z centralnim zaklepanjem spodaj. Dolžina kesona cca 5000 mm, stranske stene s 6 spodnjimi tečaji. Vzmeti za povratni zamik stranskih sten (ni možno pri deljenih stranskih stenah), širina kesona 2420 mm, par talnih pritrdilnih obročev, vsak 5 ton. Bsdpfxek E Tdaj Amteli Navodila za uporabo: Navedena skupna masa je tehnično možna; odvisno od tovora skupna masa ob upoštevanju dovoljenih osnih, podpornih in priklopnih mas ni vedno dosegljiva. (Možne slabe vozne lastnosti zaradi nepravilne razporeditve tovora). Država registracije: Nemčija, z Dekra tehničnim pregledom in potrdilom (po §13 EG - FGV), 24/7 servisna linija, pripravljeno za enovrstične nosilce registrskih tablic, obrisna oznaka z odsevnimi trakovi skladno z ECE R 048, bočno bela in zadaj rdeča. Slike so arhivske. Vozilo je lahko še v uporabi!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 4.600 kg, največja dovoljena obremenitev: 13.400 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.370 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 7.200 mm, skupna širina: 2.550 mm, skupna višina: 2.350 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 100 odstotek, Rešitev za prevoz po meri Konfigurirajte svoje vozilo Fliegl v skladu z vašimi zahtevami. Prikazano vozilo je primer. Proizvodnja in oprema se izvajata individualno glede na želje kupca. *Podvozje tandem kesonske prikolice* Varjena jeklena konstrukcija, skozi potekajoča kiper os na zadku s 100 mm ležajem za kiper kroglo, podporna noga z menjalnikom spredaj, preklopna zadnja podpora, zagozde s fiksirnim nosilcem, jekleni stranski zaščitni okvir, četrtinski blatniki pred in za vsako osjo, z antispraj zaščitnimi zavesami za vsako osjo, z zaklenljivim prostorom za aluminijaste nakladalne rampe pod nakladalno površino 1 par aluminijastih ramp, dolžina ca. 3.600 mm, širina 400 mm, nosilnost na par 8.000 kg plastična orodjarna s polico, š=620/v=360/g=440 mm, zaklenljiva s ključavnico *Priklopna naprava tandem prikolice* Vlečna gred s preizkušeno vlečno zanko, *Osi in vzmetenje* BPW bobnaste zavorne osi, zračno vzmetenje z dvižnim/spuščenim ventilom *Kolesa in pnevmatike* 385/55 R 22,5'', po izbiri proizvajalca, jekleni platišči, tovarniško srebrni *Zavorni sistem* Dvovodna zračna zavorna naprava, parkirna zavora z vzmetnim akumulatorjem, 2 varno zamenljiva priključna nastavka spredaj z vodniki do vlečnega vozila, EBS – elektronski zavorni sistem z EBS vtičem spredaj s povezovalnim kablom POZOR: Priklopno vozilo lahko vlečejo le vlečna vozila, ki zagotavljajo učinkovitost ABS sistema! *Elektrika* 24 voltov, večkomorne luči, stranske rumene LED luči 2 bele pozicijske luči spredaj, 2 belo/rdeči sledi zadnje luči 2 x 7-polna varno zamenljiva vtiča spredaj s povezovalnim kablom *Hidravlika* Trosmerni kiper, hidravlična več-batna črpalka z omejevalnikom dviga in varnostno vrvjo, hidravlični priključek s SVK vtičem NW 10/3, vključno s povezovalno cevjo upravljanje preko stranskega pogona na tovornjaku *Kiper nadgradnja* Jekleni pod HB 400, debelina 4 mm, zadnji ležaj za kiper kroglo 100 mm premera jeklene stranice, stranice preklopne in nihajne z centralnim zaklepanjem spodaj. Prednja in stranske stranice ca. 800 mm visoke, zadnja stranica jeklo, ca. 600 mm visoka, kot kombinirana nihajna vrata, povratne vzmeti za stranico 4 para zunanjih pritrdilnih obročev v tleh, vsak po 3 t, 2 para pritrdilnih obročev v tleh, vsak po 5 t *Homologacija / Tablice* Država homologacije: Nemčija s pregledom in poročilom Dekra 24/7 servisna telefonska številka pripravljeno za enovrstni nosilec registrske tablice Bljdpfx Amezcyl Rotoi obroba s svetlobnimi trakovi po ECE R 048, stransko bela, zadaj rdeča opozorilna tabla po ECE - 70 Barva okvir pocinkan ali lakiran po želji kupca stranice/nadgradnja lakirane po želji kupca Rešitev za prevoz po meri Konfigurirajte svoje vozilo Fliegl v skladu z vašimi zahtevami. Prikazano vozilo je primer. Proizvodnja in oprema se izvajata individualno glede na želje kupca.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 3.220 kg, največja dovoljena obremenitev: 8.580 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 450 mm, skupna dolžina: 6.900 mm, skupna širina: 2.550 mm, skupna višina: 1.550 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Transportna rešitev po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta izvedeni individualno po željah stranke. Podvozje Srednjeosni prekucni priklopnik Varjena jeklena konstrukcija, neprekinjena kiper osovina zadaj z 80 mm krogličnim ležajem za kipanje Podpora z menjalniškim nosilcem spredaj Zložljivo zadnje podpiralno stojalo Zaboja za podložne kline z nosilcem Zaščita proti podvozu iz jekla Zadnja brizgalna loputa čez celotno širino (ni v kombinaciji z nosilcem za viličar) Bedpfszcv Stjx Amtsli Četrtinski blatniki iz jekla 1 plastična orodjarna, š = 600 / v = 425 / g = 460 mm, zaklenljiva (ključavnica ni vključena v obseg dobave) Opomba! Stranica v spuščenem stanju zadene v zaboja. Zaklenljiv predal za nakladalne rampe pod nakladalno površino Vlečna naprava srednjeosnega priklopnika Vlečna gred s preizkušeno 40 mm vlečno oko Višinsko nastavljiva vlečna gred s vretenom, maks. območje nastavitve 300 mm Osovine in vzmetenje GFA ali BPW osi po izbiri proizvajalca, s stožčastimi valjčnimi ležaji in S-klačno zavoro "Lasersko merjeno podvozje/osovine" znižuje obrabo pnevmatik in porabo goriva Parabolično vzmetenje z vzdrževanjem prostim jekleno-gumijastim ležajem in mehanskim izenačevalcem osi (nihanje) Kolesa in pnevmatike 235 / 75 R 17,5", proizvajalec po izbiri Jeklena platišča, tovarniško srebrna Zavorni sistem 2-cevni pneumatski zavorni sistem Barvno označene cevi za lažje servisiranje Ročna vretenasta parkirna zavora 24-voltni ABS in ALB, ABS priključek spredaj, z veznim kablom Pozor: Priklopno vozilo sme vleči samo vlečno vozilo, ki zagotavlja delovanje sistema ABS! 2 varnostni zamenljivi spojni glavi spredaj z veznimi cevmi do vlečnega vozila Elektrika 12 do 24 voltov, večkomorni LED luči, stranske rumene LED luči, osvetlitev registracije LED 2 beli pozicijski luči spredaj 2 bela/rdeča sledilna luča zadaj 2 x 7-polni varnostni vtični priključek spredaj z veznimi kabli Dodatni LED delovni reflektorji na zadnjem delu, vklop preko vzratne luči Hidravlika Trosmerni prekucni sistem, hidravlična večbatna stiskalnica z omejevalnikom hoda in varovalno vrvjo Nizkotlačni cilindri do največ 170 barov, brez dušilca. Če je potrebno, le-ta naknadno vgraditi na tovornjak (tovornjak z največjo hidravlično kapaciteto do 55 l/min). Hidravlični priklop z SVK vtičem NW 10/3, vključno z vezno cevjo Upravljanje preko tovornjakovega pomožnega pogona Prekucne ploščadi Stabilna prekucna ploščad z 4 mm jeklenim podom, stranice iz jekla, neprekinjene, preklopne in nihajne z osrednjo spodnjo blokado. Zadnji vogalni stebrički snemljivi. Zadnja stranica preklopna in nihajna, z osrednjo spodnjo blokado. Dolžina transportne ploščadi približno 5.000 mm, stranice spodaj s 6 tečaji Vzmetni mehanizem za vračilo stranic Širina transportne ploščadi 2.420 mm 3 pari talnih pritrdilnih ušes, vsako za 5 ton Barvanje Okvir pocinkan, vključno s pasivacijo "15 let garancije proti prerjavitvi" Stranice/prekucna ploščad: pocinkane ali pobarvane po želji stranke Transportna rešitev po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema sta izvedeni individualno po željah stranke.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 6.950 kg, največja dovoljena obremenitev: 23.050 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 9.350 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Rešitev za prevoz po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je primer. Proizvodnja in oprema se izvajata individualno glede na želje stranke. Šasija prikolice s centralno osjo, gradbena izvedba Varjena konstrukcija iz drobnozrnatega jekla Prednji oporni nogi na menjalniku Bjdpfezcv D Njx Amtsli Hidravlična zadnja podpora Zagozde za kolesa z nosilcem Stranska zaščita iz aluminija brez zaščite proti podvozu Zadnji blatniki čez celotno širino Blatniki pred vsako osjo in antispray-blatniki za vsako osjo Plastična orodjarna, z vmesno polico, š=620/v=360/g=440 mm, zaklepna z obešanko Razširitve izvlečne do 3.000 mm Sredinsko skladišče za lesene deske + lesene deske 70 mm za razširitev na 3.000 mm Privezne točke za nizkonosečo prikolico Vgrajeni obročasti d-vlečni nosilci v zunanjem okviru, vsak 5 t (možnost predelave v cevi za količke) Privezne gobice zgoraj in ob strani v zunanjem okviru, vsak 10 t Vleka centralnoose prikolice Vlečna roka s preizkušeno 50 mm vlečno zanko Osovine in vzmetenje Bobnaste zavore "Lasersko merjene osi/podvozje" - za zmanjšano obrabo pnevmatik in nižjo porabo goriva Zadnja os krmiljena, z avtomatsko blokado pri vzvratni vožnji prek vzvratnega svetila, dodatna blokada na vozilu prek ročnega gumba Zračno vzmetenje 1. os samodejno dvižna os, dodatno ročno spustljiva, upravljanje prek gumba na vozilu Dvig osi pod priporočeno vozno višino, zato ni jamstva za poškodbe pnevmatik Zavorni sistem Dvocevni zračni zavorni sistem, barvno označene cevi za lažje servisiranje Parkirno zavora z vzmetjo 2 nezamenljivi priključni glavi spredaj z povezovalnimi cevmi do vlečnega vozila EBS, Elektronski zavorni sistem z EBS priključkom spredaj, vključno s povezovalnim kablom Opozorilo: Priklopno vozilo sme vleči samo vlečno vozilo, ki zagotavlja delovanje ABS! Z dvigalno/spustnim ventilom Višina vozila v kombinaciji z dvižno osjo: ko je os dvignjena, se višina nakladalne oziroma skupne višine poveča za 50 mm Sistem za stabilnost vozila Trailer Infocenter za prikaz podatkov o vozilu, kot so obremenitev osi, prevožena kilometrina in diagnostična/sporočilna sporočila sistema Prepoznavanje obremenitve osi prek EBS-Canbus signala, prikaz na zaslonu v kabini voznika Kolesa in pnevmatike 235/75 R17,5, znamka po izbiri proizvajalca Jeklena platišča, tovarniško srebrna Električni sistem 24 voltov, večkomorni LED žarometi z uporom, stranske rumene LED luči, osvetlitev registrskih tablic v LED 2 bele pozicijske LED luči spredaj 2 bela/rdeča LED luči za ohranjanje pasu zadaj 2 x 7-polni izmenljivo varni vtiči spredaj s povezovalnim kablom Dodatni LED delovni reflektorji na zadku LED rotacijska luč z nosilcem Opozorilne table osvetljene z LED, izvlečne do 3.000 mm Tla potem 70 mm pod iz mehkega lesa, na območju blatnikov jeklena/rebrasta pločevina Zadnja zaokrožitev s 70 mm mehke lesene talne obloge Nizko nakladalna površina z zadnjo zaokrožitvijo 7.500 mm Nakladalne rampe Jeklene rampe dolžine 2.800 mm, širine 750 mm, bočno premične preoblečene z lesom Hidravlično prek stranskega izhoda pogonskega vozila z dušilko, upravljanje stransko na levi spredaj Hidravlično bočno premikanje nakladalnih ramp, možnost individualnega upravljanja Hidravlična povezava s SVK vtičem NW 10/3, vključno s povezovalno cevjo Rešitev za prevoz po meri

Stanje: rabljeno, največja dovoljena obremenitev: 2.057 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 08/2027, dolžina tovornega prostora: 3.660 mm, širina tovornega prostora: 1.610 mm, * 6978 - ID vozila za telefonska vprašanja * Proizvajalec: Wörmann * Tip: 2700VG * Spuščajoča prikolica, nakladalna površina elektro-hidravlično spuščajoča (zelo majhen vstopni kot), elektrohidravlična črpalka z baterijo spredaj v predalu * Potrdilo/prodaja proizvajalca za 100 km/h * Kroglična sklopka, naletna zavora, podporno kolo * Pneumatike: 195/50R13C (5 / 5 / 5 / 5 mm) ----naš e-poštni naslov: Blsdpfx Amsx Ayrcotji     naša storitev za vas:       - Pridobitev kratkoročnih ali carinskih tablic       - Prevoz/dostava po celotni EU       - Carinjenje vozil v tretje države Če imate vprašanja v ruskem jeziku, lahko pokličete na naslednjo številko * WhatsApp samo za rusko govoreče: * Whatsapp za angleško, nemško in druge jezike:

Stanje: rabljeno, največja dovoljena obremenitev: 2.057 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, prva registracija: 01/2022, naslednji pregled (TÜV): 06/2028, dolžina tovornega prostora: 3.660 mm, širina tovornega prostora: 1.610 mm, * 5788 - ID vozila za telefonska povpraševanja * Proizvajalec: Wörmann * Tip: 2700VG * Spustna prikolica, nakladalna površina električno-hidravlično nastavljiva (zelo majhen nakladalni kot), elektrohidravlična črpalka z baterijo spredaj v shranjevalnem prostoru Bodpox Ayqxefx Amtjli * Potrdilo/prodajaslov proizvajalca za 100 km/h / homologacija * Kroglična sklopka, vzmetna zavora, podporno kolo * Pnevmatske gume: 195/50R13C ( 5 / 4 / 4 / 4 mm ) * Cena brez dvigalne ploščadi! ----naš e-poštni naslov:     naš servis za vas:     - pridobitev začasnih ali izvoznih tablic     - dostava / prevoz po vsej EU     - carinjenje vozil za izvoz v tretje države Če imate vprašanja v ruskem jeziku, lahko pokličete na naslednjo številko * WhatsApp samo za rusko govoreče: * WhatsApp za angleščino, nemščino in druge jezike:

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 14.680 kg, največja dovoljena obremenitev: 35.320 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.300 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 600 mm, skupna dolžina: 15.400 mm, skupna širina: 2.550 mm, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Tailor-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is just an example. Production and equipment are customized to meet each customer’s needs. Chassis Lowbed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2" king pin Blsdpfei Ri Hgox Amtoi 24 t, two-speed landing gear, single-sided operation, with straight base, without shift compensation Rear supports, foldable 2x wheel chocks with holders Aluminum side underrun protection Quarter-shell mudguards in front of and behind axle assembly With splash guards behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted transversely at the front of the gooseneck, with 2 storage trays Extendable widenings up to 3,000 mm (not on rear slope) (the track width of the construction machinery or vehicles to be transported must not exceed the external frame width of 2,550 mm) Storage compartment for wooden beams on the gooseneck, transverse at the front 70 mm wooden beams for extending to 3,000 mm Digger boom recess over the rear axles, extending to the rear, approx. 500 mm wide and approx. 230 mm deep Lashing eyes low loader 3 pairs of lashing eyes rated at 10 t each in front on the gooseneck, 8 pairs at 10 t each in the lowbed, 3 pairs of lashing rails in the track area of the lowbed, 3 pairs of lashing eyes at 10 t each in the axle/rear area Axles and suspension SAF drum brake axles Axles/chassis laser-aligned: reduces tire wear and fuel consumption With steering axle Air suspension Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel twin wheels, factory silver Braking system Two-line compressed air braking system, colored pipes for easier service Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer must only be towed by tractors that ensure ABS functionality! 2 foolproof coupling heads at the front, without connecting line With lift & lower valve, hold function in lower position + auto-reset function Axle load detection via EBS CAN bus signal, for display in the truck cab (truck must be properly prepared, no truck installation, not a certified scale) Vehicle stability system Trailer Info Center, for displaying vehicle data such as axle loads (not a certified scale), mileage, and diagnostics/system messages. Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof sockets at the front 1x additional LED work light at the rear 1x LED beacon with holder, controlled via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Flooring Gooseneck with steel/chequer plate cover 70 mm softwood flooring in the track area, steel/chequer plate in wheel arch area, lowbed left and right in track area hydraulically liftable via truck PTO Rear slope with 70 mm softwood flooring Lowbed length approx. 6,300 mm Side boards 25 mm aluminum hollow section, 400 mm high, insertable at the front and sides of the gooseneck Loading ramps Steel ramps, 2,800 mm long, 750 mm wide Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is for illustrative purposes. Production and equipment will be tailored individually according to customer specifications.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33001012559, lastna masa: 6.250 kg, največja dovoljena obremenitev: 17.750 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.620 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 10.890 mm, skupna širina: 2.550 mm, skupna višina: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5", stanje pnevmatik: 100 odstotek, barva: črn, Chassis Low-bed Trailer: Steel welded construction, turntable with robust ball-bearing slewing ring, foldable rear support, 2 wheel chocks with holder, aluminum side underrun protection, splash guards at the rear across the full width (not compatible with forklift mounting), half-shell mudguards, 1st axle with anti-spray splash guards, anti-spray splash guards behind 2nd and 3rd axles, 1 plastic toolbox with shelving, W=620/H=360/D=440 mm, lockable with padlock, width extensions retractable to 3,000 mm, storage compartment for timber planks in the middle of the load bed, 70 mm timber planks for extension to 3,000 mm, lashing eyes for low-loader, 1 pair of lashing cutouts in the longitudinal beam at the front on the gooseneck recessed (each 10 t.), 4 pairs of lashing holes in the outer frame (each 5 t. load securing strap hooks), 7 pairs of lashing mushrooms, recessed at the top and sides of the outer frame (each 10 t.), 1x front on gooseneck, 6x in well-bed, first lashing eye 250 mm from the front and last a max. of 250 mm from the rear, spacing of the lashing eyes no greater than 1100 mm, 5 pairs of ring lashing eyes recessed in the outer frame (each 5 t., convertible to stake pockets), 2 pairs of additional folding lashing eyes (each 10 t.), 1x on gooseneck (protruding), 1x recessed in the floor behind the last axle, 1 pair of screw-in lashing eyes (each 6.7 t., JDT), with large flange plate incl. thread as counter-holder, at the front on gooseneck. Towing attachment for turntable trailer: drawbar with certified 40 mm towing eye, parking sockets for electrics/ABS and air connections on the drawbar. Axles & Suspension: SAF drum brake axles, 'axle/chassis laser alignment' for reduction of tire wear and fuel consumption, air suspension with raising & lowering valve, controllable separately for front and rear. Wheels and Tires: 235/75 R17.5" Fulda, rims: 6 x steel rims mounted inside in twin arrangement; 6 x polished aluminum rims mounted outside. Brake system: 2-line compressed air brake system, spring-loaded parking brake, trailer info center to display vehicle data such as axle load (not certified scales) and odometer, vehicle driving stability system, axle load detection via EBS CAN bus signal for display on truck cab screen (truck must be suitably pre-equipped), 2 fail-safe coupling heads at front with connecting lines to tractor unit, EBS, electronic braking system with EBS plug at front including connection cable. Bedpfxozaznzj Amtjli Electrics: 24 Volt, multi-chamber LED lights, side yellow LED lighting, license plate lighting in LED, make: Aspöck EcoLED 2 with dynamic indicator premium LED side marker lights, 2 front white position lights in LED, 2 rear white/red lane control lights in LED, 2 x 7-pin fail-safe plugs at the front with connection cable, additional LED work light at rear, 1 LED rotating beacon with bracket, switched via parking light, 2 pairs of LED-illuminated warning signs, extendable to 3,000 mm. Floor: front gooseneck section with steel/chequer plate covering, tool box recessed in the ramped transition to gooseneck, then with 70 mm Siberian larch wood flooring, wheel arch area with steel/chequer plate surface, rear ramp with 70 mm larch wood flooring, low-bed area including rear ramp 6,500 mm, drive-on ramps: steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, additional ramp securing bracket, foldable underneath (for lateral anti-slip - not in combination with hydraulic lateral ramp shift), with wood overlay, spring

Stanje: novo, največja dovoljena obremenitev: 8.220 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, NEW VEHICLE Fliegl Tandem Sliding Curtain Through-loader Tandem Through-loading system with front portal doors Drive-over ramp 2,400 mm wide and 350 mm long Gross weight 11,800 kg Payload 8,220 kg Unladen weight 3,580 kg Overall length 9,450 mm Loading length 7,300 mm Loading width 2,480 mm Bedpfop N Ib Nsx Amtsli Interior height 2,790 mm Loading height 1,000 mm Outer frame with LOAD LOCK profile Foldable rear support Tow eye 40 mm Adjustable drawbar from 1,950 mm to 2,300 mm Air suspension with lift and lower valve Plus pre-carriage/handling from warehouse Wiesmoor EUR 1,280.00 net Lease-purchase offer: Term 48 months, residual value 40%, down payment only the VAT, monthly rate EUR 519.00 net Vehicle is available at short notice from current production. Tarp color can still be selected in some cases.

Stanje: novo, največja dovoljena obremenitev: 8.840 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Overall length: 8,000 mm Loading length: 6,200 mm including rear bevel Additional information: plus delivery/preparation ex-stock location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: central axle trailer Fine-grain steel welded construction Slightly sloped outer frame, new design with "Load-Lock profile" for securing lashing straps Pair of lashing eyes on the outer edge of flooring, each rated 5t: 1 x in the front corners, 1 x in front of and 1 x in the rear bevel 6 pairs of lashing eyes on the outer edge of floor/frame, each rated 5t Bledpfeyl E Dqox Amtei Gear support leg at front Foldable rear support Wheel chocks with holder Aluminium side underrun protection Galvanised steel rear underrun protection Full-width rear mud flap (not in conjunction with forklift mounting) Quarter shell mudguards 1 plastic toolbox, W=600 / H=425 / D=460 mm, lockable Drawbar for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension: GFA or BPW axles as per manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical load compensation (rocker suspension) Brake System: 2-line compressed air brake system Colour-coded line routing for easy servicing Manual spindle parking brake 2 confusion-proof coupling heads at front, with connecting lines to tractor unit 24 volt ABS and ALB, ABS plug at the front with connecting cable Note: The trailer may only be towed by vehicles capable of ensuring ABS functionality! Wheels and Tyres: 235/75 R17.5, make as per manufacturer’s choice Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at front, LED 2 white/red lane marker lights at rear 2 x 7-pin confusion-proof connectors at front, with connection cable Floor: Steel/chequer plate flooring for high point load capacity Note: Slight floor waviness due to welding distortion possible! Platform length approx. 6,200 mm Rear bevel approx. 900 mm Front wall / front corner posts: 25 mm aluminium hollow section, 400 mm high Side walls: 25 mm aluminium hollow section, 400 mm high, foldable and removable Centre posts: Without centre posts Rear wall / rear corner posts: 1 pair of steel posts mounted to the frame with provision for securing loading ramps, entrance width approx. 2,430 mm Loading ramps: Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable With carrying handle on ramps Wooden covering (front end area in steel/chequer plate) With gas strut for one-man operation Operating information: The specified gross weight is technically achievable; however, depending on the type of load, the permitted gross weight may not be reached due to permissible axle/support/kingpin loads. (Poor driving and trailing behaviour due to incorrect load distribution possible) Registration country / plates: Germany With Dekra inspection and certification (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line registration plate holder Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Paintwork: Frame DB 7350 Novagrau Front wall aluminium Side walls anodised aluminium Loading ramps hot-dip galvanized

Stanje: novo, največja dovoljena obremenitev: 10.600 kg, skupna masa: 14.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Vehicle / Body: Tandem trailer First registration: New vehicle Gross vehicle weight: 14,000 kg Unladen weight: 3,400 kg Payload: 10,600 kg Overall length: 8,080 mm Loading length: 6,200 mm incl. rear incline Width: 2,550 mm Loading height: 900 mm Additional information plus pre-carriage / provisioning from stock location 26639 Wiesmoor €1,280.00 / net - Platform width approx.: 2,480 mm - Drawbar length approx.: 1,750 mm Vehicle consists of Chassis: central axle trailer Fine-grain steel welded construction Outer frame slightly inclined, new design with "Load-Lock profile" for lashing strap anchoring 6 pairs of lashing rings outside in the floor/outer frame, each 5t 3 pairs of lashing rings outside in the floor, each 5t 1 at the front corners, 1 before and 1 in the rear incline at the back Landing leg at the front Foldable rear support Wheel chocks with holder Steel underrun protection Rear spray flaps across total width (not in combination with forklift mounting) Quarter-round mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Central axle trailer coupling gear Drawbar with certified 40 mm drawbar eye Drawbar height adjustable via spindle, max. adjustment range 250 mm Axles & suspension Drum brake axles, manufacturer's choice "Axles & running gear laser aligned" – reduces tyre wear and fuel consumption Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17.5" as per manufacturer Steel wheels in twin arrangement, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, with connecting lines to towing vehicle Bsdpfxjy Dzk So Amtsli 24 volts EBS, electronic braking system with EBS plug at the front, with connection cable Notice: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED side marker lights 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable plugs at front, with connection cable Floor Steel / chequer plate floor for high point load capacity Note: Slight floor rippling possible due to welding distortion! Platform length approx. 6,200 mm Rear incline approx. 900 mm Front bulkhead / corner stanchions 25 mm aluminium hollow profile, 400 mm high Sidewalls 25 mm aluminium hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to the frame and with holder for securing the loading ramps, drive-on width approx. 2,430 mm Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally adjustable with handgrip on ramps wooden overlay (tip area steel / chequer plate) gas pressure spring for single-person operation Operating instructions The indicated gross vehicle weight is technically feasible, but depending on cargo, the total weight may not be achievable while complying with the permissible axle, support, and fifth-wheel loads. (Poor driving and trailing behavior may occur due to improper load distribution) Special permit required if maximum train length exceeds 18,750 mm. Country-specific registration regulations must be observed. Country of registration / license plates Country of registration: Germany with Dekra inspection and certificate (as per §13 EC - FGV) 24/7 service hotline pre-installed for single-line license plate holder Conspicuity markings with reflective tape to ECE R 048, white on sides, red at rear Paintwork Frame in DB 7350 Nova grey "10-year warran

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Further Information Plus pre-carriage / provision from storage location 26639 Wiesmoor €1,280.00 net Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing mount Support jack at the front Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mudflap Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Note! Side wall contacts toolbox when folded down. Lockable storage for loading ramps underneath the loading area NO ramps included Drawbar for central axle trailer Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles "Axles/chassis laser measured" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalizer (rocker equalizer) Wheels and Tires 235 / 75 R 17.5" Manufacturer's choice Factory silver steel rims Brake System 2-line air brake system Color-coded lines for easier servicing Manual spindle parking brake Integral air reservoir ABS and ALB, with ABS connector at the front including connecting cable Caution: The trailer may only be towed by towing vehicles that ensure ABS function! 2 tamper-proof coupling heads at the front with connection lines to the truck Bsdpsy Dzlcofx Amtoli Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin tamper-proof plugs at the front with connecting cable Hydraulics Three-way tipper system, hydraulic multi-piston press with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, throttle must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Operation hydraulically via truck PTO Tipper Body Robust tipping body with 4 mm steel floor, steel side wall construction, continuous side walls foldable not pendulum-mounted, without lower central locking. Removable rear corner stanchions. Rear wall foldable and pendulum-mounted, lower central locking. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Drop side retraction springs (not available with split side walls) Platform width 2,420 mm 5 pairs of lashing eyes in the floor, each rated for 5 t Operational Notes The specified total weight is technically possible; depending on the type of load, the total weight may not be achievable while observing the permissible axle/support/kingpin loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of Registration / Plates Country of Registration: Germany With Dekra approval and report (in accordance with §13 EC-FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame hot-dip galvanized including passivation "15-year warranty against rust-through" Side boards/platform RAL 5002 ultramarine blue Note! Platform interior only primed – if painted, special platform version required! Optional: loading ramps €1,280.00 net

Stanje: rabljeno, največja dovoljena obremenitev: 8.470 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, prva registracija: 06/2018, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna teža: 11.800 kg Lastna teža: 3.330 kg Nosilnost: 8.470 kg Bedpfx Amjy Arkasteli Skupna dolžina: 6.950 mm Dolžina nakladalne površine: 5.000 mm Širina: 2.550 mm / Nakladalna širina ca. 2.420 mm Višina nakladanja: ca. 950 mm Dodatne informacije: - Sprednja podporna noga - Zložljivo zadnje podpiralo - Stranice 450 mm - Velik pritrdilni paket - Kadar vroče cinkan, vključno s pasivacijo - Nakladalne rampe opcijsko 1.280,00 €

Stanje: novo, največja dovoljena obremenitev: 8.580 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Further information plus pre-carriage / provision ex storage location 26639 Wiesmoor €1,280.00 / net Chassis: Central axle tipper trailer Steel welded construction, continuous tipping shaft at rear with 80 mm ball bearing mount Gear support leg at the front Foldable rear support 2 wheel chocks with holders Steel underride protection Rear mudflaps across the entire width (not in combination with forklift holder) Quarter-shell mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! Sideboard contacts the toolbox when folded down. Lockable storage compartment for loading ramps under the loading area Central axle trailer drawbar Drawbar with certified 40 mm drawbar eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles & Suspension GFA or BPW axles (manufacturer’s choice), with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation (rocker compensation) Wheels and Tires 235/75 R 17.5" manufacturer’s choice Steel rims, factory silver Braking system 2-line compressed air brake system Color-coded piping for easy service Hand spindle parking brake 24 volt ABS and ALB, front with ABS connector and connecting cable Attention: The trailer may only be towed by towing vehicles that ensure ABS functionality! 2 non-swappable coupling heads at the front, with connecting lines to the towing vehicle Electrics 12 to 24 volts, multi-chamber LED lights, side amber LED lighting, LED license plate lights (Note: certain towing vehicles may cause false diagnostic errors, despite proper function) 2 white position lights at the front 2 white/red lane guidance lights at the rear 2 x 7-pin non-swappable connectors at the front, with connecting cable 1 additional LED work light at the rear, controlled via reversing light Hydraulics Three-way tipper system, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic delivery rate of 55 l/min). Hydraulic connection with SVK plug NW 10/3, including connecting hose Bjdpfoy Dzlisx Amtjli Operation hydraulically via truck PTO Tipper body Robust tipper body with 4 mm steel floor, steel sideboard structure, continuous side panels, foldable and swinging with central locking at the bottom. Rear corner posts plug-in. Rear panel foldable and swinging, with central locking at the bottom. Bed length approx. 5,000 mm, sidewalls with 6 lower hinges. Sideboard retraction springs (not possible with foldable front panel) Bed width 2,420 mm 3 pairs of lashing rings in the floor, each 5 tons Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be achievable within the permissible axle/support/kingpin loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC-FGV) 24/7 Service hotline prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Coating Frame hot-dip galvanized, including passivation "15 years warranty against rust-through" Sideboard/platform RAL 9010 pure white Note!

Stanje: novo, največja dovoljena obremenitev: 8.840 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, New Fliegl tandem low-loader with ramps, model TPS 118 Chassis fully hot-dip galvanized – sidewalls aluminum Vehicle from current production – delivery time approx. two weeks Gross weight: 11,800 kg Empty weight: 2,960 kg Payload: 8,840 kg Total length: 8,000 mm Loading length: 6,200 mm incl. rear slope Width: 2,550 mm Loading height: 900 mm Blsdpfov E Dqlex Amtoi Further information plus pre-carriage / handling from storage location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grain steel welded construction Slightly sloping outer frame, new design with "Load-Lock profile" for lashing strap attachment 3 pairs of lashing rings on the exterior floor, each 5t 1x front corners, 1x in front and 1x in the rear slope at the back Pair of lashing rings on the exterior floor / outer frame, each 5t Support leg at front Foldable rear support 2 wheel chocks with holder Side impact protection aluminum Underrun protection galvanized steel Spray flaps at the rear across the full width (not in conjunction with forklift holder) Quarter-shell fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Drawbar arrangement for central axle trailer Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max adjustment 300 mm Axles + Suspension GFA axles with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load balancing (rocker equalizer) Brake system 2-line compressed air brake system Color-coded line layout for easier servicing Hand spindle parking brake 2 key-proof coupling heads at front, with connection lines to towing vehicle 24 volt ABS and ALB, ABS socket at front, with connecting cable Note: The trailer may only be towed by vehicles that ensure proper ABS functionality! Wheels and Tires 4 x 235/75 R17.5, brand at manufacturer’s discretion 4 steel rims, factory silver Electrics 24 volt, multi-chamber taillights, side yellow LED lighting 2 white position lights at front LED 2 white/red lane marker lights at rear 2 x 7-pin key-proof plugs at front, with connecting cable Floor Steel / checker plate floor for high point load capacity Note: Light floor warping due to welding distortion possible! Platform length: approx. 6,200 mm Rear slope approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 400 mm high Sidewalls 25 mm aluminum hollow profile, 400 mm high, foldable and removable Central stanchions 1 pair of folding stanchions in sidewall height, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions bolted to frame with holder for ramp locking, entry width approx. 2,430 mm Loading ramps 2 steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handgrip on ramps wood-covered (ramp tip with steel/checker plate) gas strut for single-operator handling Paintwork Frame hot-dip galvanized with passivation "15-year warranty against rust-through" Front wall RAL 9006 white aluminum Sidewall RAL 9006 white aluminum Loading ramps hot-dip galvanized Hire purchase offer: 48-month term, down payment only VAT, residual value 40%, monthly installment EUR 350.00

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Further information plus pre-carriage / provision ex stock location 26639 Wiesmoor €1,280.00 net Chassis Central Axle Tipper Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical bearing Bsdpfoy Dzk Eex Amteli Gear support leg at the front Folding rear support 2 wheel chocks with holders Steel underrun protection Full-width rear mudflaps Quarter shell mudguards 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm Note! Side wall touches the toolbox when folded down. Lockable storage compartment for loading ramps under the loading area Central axle drawbar coupling for trailer Drawbar with certified 40 mm draw eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles & Suspension GFA drum brake axles "Axles/chassis laser-aligned" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical load equalization (rocker balancing) Wheels and Tires 235 / 75 R 17.5" manufacturer’s choice Steel rims, factory silver Braking System 2-line pneumatic braking system Color-coded piping for easier maintenance. Manual spindle parking brake ABS and ALB, with ABS connector at front, with connecting cables Warning: The trailer may only be towed by vehicles that ensure effective operation of the ABS! 2 foolproof coupling heads at the front, with connecting lines to the truck Electrics 24 Volt, multichamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof plugs at the front, with connecting cables Hydraulics Three-way tipping system, hydraulic multi-piston press with stroke limitation and safety cable, Low-pressure cylinder up to max. 170 bar, without restrictor. If required, to be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic operation via truck PTO Tipper platform Sturdy tipper body with 4 mm steel floor, steel side boards, continuously hinged and swinging with central locking at the bottom. Removable corner posts at the rear. Rear wall foldable and swinging, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Tailgate retraction springs (not possible with divided side walls) Platform width 2,420 mm 5 pairs of lashing eyes in the floor, each rated for 5 t Operating instructions The stated gross weight is technically possible; depending on the cargo, the gross weight may not be achievable while observing the permissible axle, support, and fifth wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Registration country / plates Registration country: Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Conspicuity marking with reflective strips according to ECE R 048, white on the sides, red on the rear Paintwork Frame hot-dip galvanized including passivation "15-year warranty against corrosion" Side board/platform RAL 9005 deep black Optional loading ramps €1,280.00 net

Stanje: novo, lastna masa: 6.650 kg, največja dovoljena obremenitev: 17.350 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,650 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, - welded steel construction - bogie with heavy-duty ball bearing turntable - foldable rear support - 1 spare wheel holder for 1 spare wheel, with wheel mounting kit - without spare wheel, - 1 plastic toolbox, with shelf, dimensions 620x360x440 mm (w/h/d), lockable with padlock - extendable outriggers up to 3,000 mm (not at rear bevel) - storage compartment for timber planks underneath the low-bed area - 70 mm timber planks for extension to 3,000 mm - 1 pair of recessed lashing rings at the front in the gooseneck, each rated at 5 t - 7 pairs of lashing mushrooms recessed top and side in the outer frame, each rated at 10 t (1 x front in gooseneck, 6 x in low-bed area) - 5 pairs of stake pockets recessed in the outer frame, internal 70x40 mm - 2 additional pairs of folding lashing rings, each 10 t, 1x front in gooseneck, 1x behind 3rd axle - towing bar with 40 mm towing eye and 8° inclined towing eye - SAF drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) - 235/75 R17.5 - twin steel rims, factory silver - dual-circuit compressed air brake system - spring-loaded parking brake ABS and ALB, with socket at front, including connecting cable - 24 volt, multi-chamber lights, side yellow LED lighting - 2 x 7-pin non-interchangeable connectors at front, with connecting cable - 1 LED beacon with holder, operated via parking light (removable lamp) - 2 pairs of double LED warning panels, extendable up to 3,000 mm - gooseneck with steel/chequer plate covering - storage box recessed in the transition slope to gooseneck - followed by 70 mm softwood floor, steel/chequer plate covering in wheel well area - rear slope with 70 mm softwood floor - low-bed area incl. rear slope 6,500 mm - steel ramps 2,800 mm long, 750 mm wide, laterally adjustable, with timber covering - additional ramp safety device Bsdpsyxh Rzsfx Amtjli

Stanje: novo, lastna masa: 6.600 kg, največja dovoljena obremenitev: 17.400 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 10.900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5 (Doppelbereifung), barva: srebrn, vrsta prenosa: mehanski, poraba goriva (mestna vožnja): 1.090 l/100 km, Unladen weight: 6,600 kg, permissible gross weight: 24,000 kg, tyre size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf suspension, weights: Immediate approval technically possible Gross weight: 24,000 kg, 30,000 kg, payload approx.: 17,400 kg, 23,400 kg; unladen weight approx.: 6,600 kg +/- manufacturing tolerance. Dimensions (approx.): Total length 10,900 mm, total width 2,550 mm, gooseneck length 2,180 mm, low bed platform length incl. rear chamfer 6,500 mm, rear chamfer length 950 mm, frame width 2,520 mm, loaded loading height in low bed 860 mm, coupling height 900 mm, drawbar length 1,900 mm. Bodpex Nrp Nefx Amtsli Equipment: - Extendable width up to 3,000 mm (not in rear chamfer), incl. timber planks - SAF drum brake axles - Parabolic suspension - Drawbar with certified 40 mm towing eye - Tyres 235/75 R17.5 - Storage box recessed at the transition to the gooseneck - 1 plastic toolbox with shelf, 620 mm wide / 360 mm high / 440 mm deep - Steel ramps: 2,800 mm long, 750 mm wide, laterally adjustable, timber-coated - Ramps with spring assist - Frame hot-dip galvanised Subject to errors and changes.