Faymonville F-S42-1Aca nakup rabljenega (26.189)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Renswoude
953 km
Polovični polnilnik z nizkim nakladanjem
FaymonvilleMULTIMAX | F-S44 | DOUBLE EXTENSION 27000 MM | ...
Pokliči
Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 8.000 kg, dovoljena osna obremenitev (os 3): 8.000 kg, prva registracija: 11/2017, skupna dolžina: 135.000 mm, skupna širina: 2.540 mm, skupna višina: 780 mm, barva: črn, Leto izdelave: 2017, Oprema: ABS, = Dodatne možnosti in oprema =
- Zračno vzmetenje
= Dodatne informacije =
Blsdpfsyx Hwyjx Ab Toh
Konfiguracija osi
Zadnja os 1: Največja osna obremenitev: 8000 kg
Zadnja os 2: Največja osna obremenitev: 8000 kg; Krmiljena
Zadnja os 3: Največja osna obremenitev: 8000 kg; Krmiljena
Zadnja os 4: Največja osna obremenitev: 8000 kg; Krmiljena
Teže
Lastna teža: 14.800 kg
Nosilnost: 42.200 kg
Skupna dovoljena masa: 57.000 kg
Stanje
Tehnično stanje: dobro
Optično stanje: dobro
Poškodbe: nobenih
Finančne informacije
Cena: Na zahtevo
Dodatne informacije
Za več informacij se obrnite na David F Middelman.
Mali oglas
Almelo
914 km
Innenlader
FaymonvilleF-S43-1EJB 9500 mm!
Pokliči
Stanje: rabljeno, barva: rdeča, Leto izdelave: 2016, Faymonville F-S43-1EJB.
Leto izdelave: 2016.
BPW osi, 9 t.
Največja dovoljena masa: 45.000 kg.
Obremenitev na sedlo: 18.000 kg.
Bljdpfx Abeyxldls Teh
EBS ABS ALB.
Hidravlika kompatibilna z NATO.
Hidravlično vzmetenje.
Dolžina: 9500 mm.
Pnevmatike: 385/65R22,5 80%.
ID št.: 521.
Splošni pogoji podjetja Heinhuis veljajo za vse oglase, ponudbe in predračune podjetja Heinhuis, vse dogovore sklenjene s Heinhuis ter za vsa predhodna pogajanja. S kakršnim koli odzivom sprejemate uporabo splošnih pogojev Heinhuis in izjavljate, da ste z njimi seznanjeni. Naše cene so izvozne neto cene.
= Dodatne informacije =
Leto izdelave: 2016
Dovoljena skupna masa: 45.000 kg
= Podatki o podjetju =
Za več informacij:
WhatsApp:
Mali oglas
Almelo
914 km
Priklopnik za platformo
FaymonvilleF-S43-1AAF 7.4 Meter extandable Powersteering!
Pokliči
Stanje: rabljeno, barva: črn, Leto izdelave: 2019, Faymonville F-S43-1AAF.
Leto proizvodnje: 2019.
SAF osovine, 9 tona.
Maksimalna dozvoljena masa: 45.000 kg.
Opterećenje na tovarnički čep: 18.000 kg.
Produživa do 7,4 metra.
Sistem upravljanja snagom - 3 upravljačke osovine.
Vazdušno oslanjanje.
Hidraulika radi na NATO električni sistem.
ABS, EBS, ALB.
Bodpfx Aeyub S Ajb Tolh
Dimenzije poda:
Dužina: 13.550 mm.
Širina: 2.500 mm.
Visina: 1.450 mm.
Visina aluminijumskih stranica: 600 mm.
Visina tovarničkog čepa: 1.250 mm.
Gume: 385/65R22,5, preostalo 70% profila.
ID broj: 489.
Opšti uslovi poslovanja kompanije Heinhuis primenjuju se na sve oglase, ponude i kalkulacije Heinhuis-a, sve ugovore koje Heinhuis zaključuje i pregovore koji ih prethode. Odgovorom na bilo koji način prihvatate primenu opštih uslova poslovanja kompanije Heinhuis i potvrđujete da ste upoznati sa istim. Naše cene su neto izvozničke cene.
= Dodatne informacije =
Godina proizvodnje: 2019
Najveća dozvoljena masa: 44.999 kg
Cena: Na upit
= Informacije o firmi =
Za više informacija:
WhatsApp:
Mali oglas
Legden
847 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEF-S43-1AAF Multimax Tieflader,Radmulden 45 t.
Pokliči
Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi
Bsdjwta Aljpfx Ab Tjlh
* Kolesni jaški
* Hidravlične nakladalne rampe nastavljive po širini
* Zračno vzmetenje
* Razširljiv
* Lastna teža: 11.020 kg
-----Interna številka vozila: 11010----Pridržujemo si pravico do napak in vmesne prodaje.
WhatsApp podpora na voljo!
Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa.
WhatsApp nemščina, angleščina -- WhatsApp nemščina, angleščina, arabščina
Mali oglas
Landsberg am Lech
379 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMAX 510 Flachbett ausziehbar
Pokliči
Stanje: rabljeno, skupna masa: 44.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2018, Unladen weight: 11,800 kg
Width: 12,000 mm
Extendable forward for front loading of coupled flatbed deck
- Gooseneck in compact design
- L x W: 3,900 x 2,480 mm
- Interchangeable 2" king pin
- Integrated hydromechanical steering
- Hydraulic lifting and lowering function, incl. support cylinders
- Rated for a technical fifth wheel load up to 24t
- 4-sided aluminium drop sides
- Steering radius: 2,200 mm
Flatbed Deck
- Lowbed with external tubes
- Flatbed length: 6,750 mm, extendable by 5,500 mm to a total of 12,250 mm
- Flatbed width: 2,550 mm
- Construction height: 200 mm
- Loaded deck height approx. 300 mm with 100 mm ground clearance, or approx. 350 mm with 150 mm ground clearance
- Front coupling claws for connection to gooseneck
2-Axle Chassis
- Chassis in compact design
- Air-suspended chassis (L x W approx. 2,750 x 2,550 mm) incl. lift/lower valve,
with 2 forced-steered axles, BPW make, wheelbase 1,330 mm
- Chassis with wheel well
Brake System
- Dual-line full-wheel pneumatic brake system
- Progressive central lubrication system
Bsdpfsy U Df Hox Ab Telh
- Radio remote control
- Coupled height when loaded: 1,250 mm
- Both axles with hydraulic forced steering
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMAX Trailer MAX 810 Semi-Tieflader 2+6 PA-X
Pokliči
Stanje: novo, največja dovoljena obremenitev: 98.290 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Extract from the equipment. Complete equipment list available upon request.
Gooseneck: MAX810-Hals-V-30-2.70-2{DSR 2 700/ASH 1300->1400}
- Gooseneck hydraulically lift/lowerable as well as detachable.
- Length approx. 3,650 mm.
- For tractor units: 6 x 4 or 8 x 4
- Truck hydraulic connection with flow regulator (20 l/min), including gallows for suspending supply lines. The tank of the tractor unit must hold at least 80 l with MAX Trailer couplings; otherwise, couplings are to be supplied ex works by the customer.
- Gallows with winch for spare wheel on the front of the gooseneck.
- 3.5-inch kingpin
- Steel front wall approx. 400 mm high.
- Removable ALU side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish.
- Control lever on gooseneck protected by a foldable cover.
- Lighting of the controls on the gooseneck with on/off switch.
- One 7-pin socket each on the left and right at the rear of the gooseneck for warning signs.
- Load gauge on the gooseneck for axle load determination at the front and rear chassis.
- BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2.
- Hydraulic connections from the gooseneck to the lowbed with screw couplings.
- Access possibility onto the gooseneck.
- 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery.
Power: 9.5 kW (12.9 HP) at 3000 rpm
Emission level: EU Stage V
Max. hydraulic pressure: 280 bar
Max. flow rate: 21 l/min
Mounted on the gooseneck.
Hydraulic oil tank 100 L
Frame hot-dip galvanized (± 480 kg)
- Hydraulic connecting lines between powerpack and connector plate on the gooseneck.
- Radio remote control:
- Operation of the powerpack, start/stop of the diesel engine.
- Operation of steering, in addition to cable remote, with 2 LED indicators on the receiver for single-track control.
- Operation of gooseneck lifting/lowering
- Operation of suspension lifting/lowering on the chassis
2-axle front bogie: MAX810-Fahrwerk-PA-X-F-2-17.5-1.50-2.75
- Pin-lug coupling at front and rear.
- Length: approx. 2,970 mm
- Chassis width: approx. 2,750 mm
- 1 pair of lashing rings (LC 10,000 daN) in the outer frame.
- 2 pairs of lashing rings (LC 10,000 daN) at the central beam.
- BEKA-MAX central lubrication for a 2-axle chassis with standard grease NLGI-2
- One 7-pin socket each on the left and right at the rear of the front chassis for warning signs.
- Chassis surface with sprayed-on sand coating for slip resistance.
- Extendable widenings by approx. 230 mm on each side for a 2-axle chassis. (± 27 kg)
Loading platform: MAX810-6-A-11.00-17.5-1.50-2.75-PA-X
Bodpfjzbfuhjx Ab Telh
- 6-axle telescopic loading platform with pin-lug coupling at the front and sloped end approx. 500 mm x 8° at the rear.
- Length: approx. 11,000 mm
- Technically extendable by: approx. 7,700 mm
- Axle spacing: approx. 1,500 mm
- 7 pairs of lashing rings along the central beam (LC 10,000 daN)
- Hydraulic coupling pin.
- BEKA-MAX central lubrication for the loading platform with standard grease NLGI-2
- One intermediate table approx. 500 mm long.
- Extendable widenings by approx. 230 mm on each side. (± 276 kg)
- Stake pocket rails for plug-in stakes approx. 100 x 50 mm, mounted transversely in the loading floor of the chassis and platform as per the vehicle diagram.
Accessories
- Reversible marking approx. 1,200 x 400 mm "CONVOI EXCEPTIONN
Mali oglas
Bremen
891 km
Polpriklopnik z nizko nakladalno ploščadjo
FaymonvilleMegamax 2-Achs Tiefbett
Pokliči
Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2022, Leto izdelave: 2022, Faymonville 2-axle lowbed semi-trailer MEGAMAX 2x12 t PA
2 steered axles
Single-extendable, 2 x 12 t pendle axles
Overall length: approx. 13,500 mm
Overall width: approx. 2,550 mm
Neck width: approx. 2,480 mm
Load bed width: approx. 2,550 mm
Chassis width: approx. 2,550 mm
Technically extendable: approx. 4,700 mm
Coupling height (loaded): approx. 1,205 mm
Loading height (max. loaded): approx. 1,005 mm
Load area length: approx. 6,850 mm
Chassis length: approx. 2,600 mm
King pin distance to front: approx. 1,200 mm
Swing radius of tractor unit (rear): approx. 2,300 mm
Swing radius (front): approx. 1,800 mm
Axle spacings: approx. 1,360 mm
Gooseneck:
- Gooseneck in SNT design for optimized load floor length, length approx. 3,750 mm
- Gooseneck hydraulically liftable/lowerable and detachable
- Technical fifth-wheel load: 25,000 kg
Blodpfx Aey Hxd Iob Tjh
Boiler deck:
- Deep-designed extendable boiler deck "SUPER LOW" design
- Length approx. 6,850 mm, with mechanical locking system
Rear chassis:
- Rear chassis with closed outer frame, chequer plate and continuous prism digger recess, approx. 1,250/700 x 505 mm, open at the rear
- PENDLE-AXLE, all axles hydro-mechanically forced-steered
- Burst hose valve on axle compensation cylinder with automated RESET function
- Hydraulic cylinders with shut-off cocks and front pins to secure lifted position
- Technical axle load: 12,000 kg each
- Hydraulic axle levelling
Brake system:
- WABCO brake system, EBS-E according to regulations
Chassis tyres:
- 245/70 R 17.5 3PMS
Metalizing:
- Complete HRM metallization (High Resistance Metallisation)
- Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%)
Painting:
- 6-coat final treatment
- Entire steel structure shot-blasted after welding. One layer of zinc-based primer, one adhesion primer. Final coat with 2 layers of 2K lacquer (acrylic) in a single colour, followed by cavity sealing with special wax
- Trailer colour: RAL 3002 Carmine Red
- Rim colour: Silver Grey
- Side board colour: Natural Aluminum
Steel structure:
- Steel structure made of high-strength fine-grained steels.
- Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690Q/S700MC (yield strength 690MPa)
- MAG welding process according to EN ISO 4063
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEFaymonville MAX 710 Tiefbett 2+4 PA - Baggerbett
Pokliči
Stanje: novo, največja dovoljena obremenitev: 73.540 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website.
Excerpt from the equipment specification. Full equipment details available upon request.
Gooseneck:
* Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm
* 2 pairs of fold-out lashing rings on the exterior (LC 5,000 daN)
* 2 pairs of lashing rings on the gooseneck (LC 10,600 daN)
* 1 pair of lashing rings in the center of the gooseneck (LC 10,600 daN)
* Suitable for tractor units 6 x 4 or 8 x 4, 2-axle
Compact front bogie:
* Hook coupling front and rear, length approx. 2,200 mm
* Bogie width: approx. 2,850 mm
Excavator deck:
* Telescopic excavator deck with drive-over deck hooks at the front and pin-eye coupling at the rear
* Base width: approx. 2,850 mm
* Length: approx. 6,650 mm
* Beam height: approx. 400 mm
* Beam width: approx. 1,350 mm
* Loading height approx. 550 mm with ground clearance approx. 150 mm
4-axle rear bogie:
* Mechanical pin-eye coupling at the front for connecting a low-bed trailer
* Rear end cross member, bogie width: approx. 2,850 mm
* Bogie length: approx. 5,480 mm
Oscillating axles, all axles hydro-mechanically forced-steered
* Technical axle load: 14,640 kg per axle (62 km/h)
* Hydraulic axle compensation
Tyres:
* Front bogie: 8 x (manufacturer’s choice; M+S) 285/70 R19.5
* Rear bogie: 16 x (manufacturer’s choice; M+S) 285/70 R19.5
* Load index 150/148J
Paintwork:
* Complete steel structure automatically shot-blasted after welding using a turbine blasting unit. Second abrasive blasting with corundum for optimum coating adhesion
* Full chassis HRM-metalized with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection
* Final coating in 2 layers of 2-component top coat, single color in RAL 3002 carmine red, according to RAL 841GL system
Including the following accessories:
* Steel front wall, approx. 400 mm high
* Plug-in ALU side panels and rear wall on the gooseneck, approx. 400 mm high, anodized finish
* 3.5-inch kingpin
* Truck hydraulic connection with flow controller (20 l/min)
* Overhead support for supply lines; tractor unit tank must hold at least 80 l
* With MAX Trailer coupling pieces; otherwise, couplings to be supplied by the customer ex works
* BEKA-MAX centralized lubrication for gooseneck with standard grease NLGI-2
* Tool kit Art No. 612452
Bodpfsxbmplox Ab Telh
* Multi-coupling hydraulic connections on the gooseneck
* Front bogie with separate air connection for air-powered tools
* BEKA-MAX centralized lubrication for 2-axle bogie with standard grease NLGI-2
* One 7-pin socket each left and right at the rear of the front bogie for warning panels
* Threading option (ø approx. 40 mm) every approx. 500 mm on the outside of the top flange of the excavator deck outer tube for screw rings (LC 16,000 daN)
* Foldable extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm
* BEKA-MAX centralized lubrication for 4-axle bogie with standard grease NLGI-2
* Socket on the rear bogie for cable remote control of rear steering
* Rear bogie with trough
* Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck left and right
* Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery
* Radio remote control:
* Operation of the power pack, start/stop of the diesel engine
* Operation of the rear steering, in addition to cable remote control
* One LED work spotlight each left and
Mali oglas
Essen
835 km
Priklopnik sedeža z delovno ploščadjo
FAYMONVILLEFaymonville Telemax Sattelauflieger - 2fach tele
Pokliči
Stanje: novo, največja dovoljena obremenitev: 42.900 kg, skupna masa: 55.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 29.000 mm, skupna širina: 2.540 mm, Oprema: ABS, The complete inventory of vehicles, including those available for immediate and short-term delivery, can be found on our website.
Extract from the equipment list. Full specifications available upon request.
Loading Platform:
* Gooseneck, length approx. 3,900 mm with central beam
* Loading platform, double extendable, length approx. 9,300 mm
* A support plate, approx. 200 mm wide, is permanently welded to the central beam
* Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the current platform length (except for the supply of the first and second locking positions)
* Technical fifth wheel load: 25,000 kg Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4
* TPMS tire pressure monitoring system in accordance with ECE R 141
* BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables
* Technical axle load: 12,000 kg each, air suspension with lift and lower valve
* 275/70 R 22.5 3PMSF twin tires. Brand at our discretion
* ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets
* 3 kW electro-hydraulic power unit for operating hydraulic functions
* 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable to the outside
* 1 pair of lashing rings at the king pin (LC 10,000 daN) – all other lashing rings (LC 5,000 daN)
* 3 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm
Bodpfoyvnd Nox Ab Tslh
* 1 stake pocket bar mounted transversely on the gooseneck floor for plug-in stakes approx. 100 x 50 mm
* 1x at the rear of the gooseneck
* 2" king pin
* Mechanical landing gear with 2-speed gearbox and crank
* 8 pairs of stake pockets recessed in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm
* 10 pairs of recessed lashing rings in the outer frame of the loading platform, foldable to the outside
* Remote steering from the front and rear via cable remote control, with axle tracking control, no installation required in the tractor unit
* Last axle with air bellows venting activated when parking brake is applied
* Steel front wall, approx. 1,600 mm high, certified design according to EN12642:2016 XL
* Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917)
* 1 LED work light on each side at the landing gear, wired to the tractor unit connection bar
* Approx. 32 mm wooden floor on the gooseneck and the loading platform
* On the large-section extension tube, one locking position every approx. 500 mm
* On the small-section extension tube, one locking position every approx. 1,000 mm, enabling locking at every approx. 500 mm
* Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,500 daN)
* 4 stake pocket bars mounted transversely on the loading platform floor for plug-in stakes approx. 100 x 50 mm
* 4 wheel chocks with holder mounted under the loading platform
* 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in the direction of travel
* 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in the direction of travel
* 1 LED work light each left and right in front of the axles, with wiring
* 2 axle load gauges mounted on the left side including axle load diagram
* 1st axle equipped with automatic lift axle function as well
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMAX810 Semi-Tieflader 2+6 - 2fach tele
Pokliči
Stanje: novo, največja dovoljena obremenitev: 96.500 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 26.900 mm, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.
Excerpt from the equipment list. Full equipment details available upon request.
Gooseneck:
* Hydraulically lift/lowerable and detachable gooseneck, approx. 3,650 mm long
* For tractor units: 6x4 or 8x4
* Truck hydraulic connection with flow control (20 l/min), incl. gantry for supply line suspension; the tractor unit tank must have at least 80 l capacity
* With MAX Trailer coupling units; otherwise, coupling units to be provided ex works by the customer
* Gantry with winch for spare wheel mounted at the front of the gooseneck
* 3.5-inch king pin
* Steel front wall approx. 400 mm high
* Removable aluminium side and rear boards on the gooseneck, approx. 400 mm high, anodised finish
* Control lever on the gooseneck protected by a folding cover
* Operator area lighting at gooseneck, with on/off switch
* One 7-pin socket each at the left and right rear of the gooseneck for warning sign
* BEKA-MAX central lubrication system for one gooseneck with standard NLGI-2 grease
* Hydraulic connections from the gooseneck to the low-bed via screw couplings
* Access steps on the gooseneck
* Four warning panels extendable by approx. 1,000 mm (approx. 423 x 423 mm) each, with one LED position lamp and bracket for beacon
* Mounting adapters for 2 spare wheels
Blsdpfx Abezahp Se Teh
* 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 hp) at 3,000 rpm
* Hydraulic connecting lines between powerpack and connector plate at the gooseneck
* One LED worklight left and right on the rear plate of the gooseneck, individually switchable
* Radio remote control for: - Operating the powerpack, start/stop of diesel engine. - Operating remote steering (in addition to cable remote), with 2 LED indicator lights on receiver for single-track control. - Lift/lower gooseneck. - Lift/lower suspension of running gear
2-axle front module:
* Bolt-eye coupling front and rear. Length: approx. 2,970 mm. Module width: approx. 2,750 mm
* BEKA-MAX central lubrication system for 2-axle module with standard NLGI-2 grease (not connected to steering rods)
* One 7-pin socket each at the left and right rear of the front module for warning signs
* Platform surface with sand coating as slip protection
* Yellow reflective tape in accordance with EU regulations at the sides, on the extension, and at the rear of the trailer
* One 7-pin socket for warning signs, left and right on the front module, in the axle area
* Extendable outriggers approx. 230 mm per side for the 2-axle module
* 1 pair M42 threaded blocks between the axles of the front module
* 1 pair brackets for plug-in warning panels in the stake pockets of the exterior frame of the loading area
Loading platform:
* 6-axle, double telescopic loading platform with bolt-eye coupling at the front and rear chamfer approx. 500 mm x 8°
* Platform length: approx. 11,000 mm
* Technically extendable by: approx. 8,200 + 7,700 mm
* Axle spacing: approx. 1,500 mm
* Base width: approx. 2,750 mm
* Hydraulic coupling pin
* BEKA-MAX central lubrication system for the platform with standard NLGI-2 grease
* Platform surface with sand coating as slip protection
* 11 pairs of recessed lashing rings in the external frame of the loading platform, foldable outwards (LC 10,000 daN)
* Permanently welded intermediate table, approx. 500 mm long
* 1 pa...
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMultimax Plus Satteltieflader Hebebett
Pokliči
Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment features.
Bljdpfsy Auhhsx Ab Teh
Full equipment details available upon request.
GOOSENECK:
* Gooseneck in SNT design for optimizing loading platform length, approx. 3,700 mm long, rear chamfer approx. 1,000 mm x 6°
* For tractor units: 4 x 2 and 6 x 2
* ASPÖCK UNIBOX
* On the gooseneck and rear chamfer: grating floor with 5 mm steel reinforcement
* 2 inch king pin
* Gooseneck guide plate for fifth wheel, approx. 500 mm wide
* Round NATO socket on the front connection rail (Maeler & Kaege VG 96 917)
* One pair of plug-in ALU side boards on gooseneck, approx. 400 mm high, anodized finish
* One LED work light each mounted top left and right on the front wall, operated by on/off switch (control via tractor unit is not possible in this case)
LOADING PLATFORM:
* Platform length approx. 9,600 mm, with rear chamfer approx. 900 mm x 6°
* Platform behind the gooseneck hydraulically liftable/lowerable, length approx. 3,000 mm, load capacity approx. 9,000 kg
* Continuous grating floor on both lift bed and platform with approx. 5 mm steel base as additional reinforcement, suitable for point loads
TYRES:
235/75 R 17.5 3PMSF twin tyres. Brand at our discretion
* TPMS tyre pressure monitoring system in accordance with ECE R 141
AXLES:
* BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steering
* 3rd axle with electro-magnetic reverse lock triggered by reverse gear and manual activation
* 1st axle with start assist
* Technical axle load: 12,000 kg per axle
* Air suspension with lift and lower valve
HYDRAULIC LOADING RAMPS:
* One pair of two-piece AXS steel ramps with grating surface, approx. 4,920 mm long and approx. 900 mm wide
* Hydraulically folding ramp tips
* Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward
* Flashing lights on the outer edges of ramp tips, switch next to ramp controls
* Ramp safety in road position via quick release
* Painted sand coating on ramp frame and ramp tip
* Mechanical drop-leg type supports on the sides of the ramps for stability when docking to unloading ramps
* Ramp operation valves located on the right side of the vehicle
BRAKE SYSTEM:
WABCO EBS-E brake system according to EU regulations
SURFACE TREATMENT:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection
PAINTWORK:
* Trailer in carmine red (RAL 3002)
* Rims silver gray
* Side boards in bare aluminum
* Wheel hubs according to axle manufacturer
* Lamp panel pure white (RAL 9010)
EQUIPMENT:
* Removable front wall made of steel, approx. 1,600 mm high, with supply line connection strip to tractor approx. 1,000 mm from bottom edge of outer frame profile
* Lashing chain fixing options on the inside left and right of the front wall, including aluminum trays below left and right for storing chains or tensioning straps
* Behind the front wall, approx. 12 mm thick DELIGNIT panel, bolted
* 2 additional pairs of bolt-on lashing rings (LC 5,000 daN)
* Electric cable winch, approx. 5,400 kg pull capacity, with radio remote control. Steel cable approx. 24 m long, cable diameter approx. 9.5 mm, including cable pressure roller
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMAX Trailer MAX510 Tiefbett 2x10 t
Pokliči
Stanje: novo, največja dovoljena obremenitev: 30.190 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. The following is an excerpt from the specifications. Complete equipment details available upon request.
Load area:
- Lowbed with external beams, extendable version in SUPER LOW design, length approx. 6,850 mm
- Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking
- Supply lines are protected within the extendable beams and automatically adjust to the current lowbed length
- 5 pairs of lashing rings, foldable outward (LC 10,000 daN)
- 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings
Gooseneck:
- Gooseneck in SNT design to optimize load area length, approx. 3,750 mm
- Gooseneck hydraulically lift/lowerable and detachable
- Technical fifth wheel load: 23,000 kg
- For tractor units: 4x2, 6x2
Rear chassis:
- Rear chassis in short version with closed outer frame and checker plate cover
- Chassis with excavator recess, closed in the rear half to accommodate air tanks
- 2 pairs of lashing rings, foldable outward (LC 5,000 daN)
- 1 pair of lashing rings, foldable outward (LC 10,000 daN)
- 1 pair of lashing rings lying flat, at the front & rear of the chassis (LC 10,000 daN)
Blsdpfoxarl Nsx Ab Teh
Axles:
- BPW axles, hydro-mechanically forced-steered
- Technical axle load: 12,000 kg per axle
- Air suspension with raise/lower valve
Tyres:
- Tyres 245/70 R 17.5 3PMSF, manufacturer of our choice
- Load index (146/146F)
- TPMS tyre pressure monitoring system according to ECE R 141
- Data transmission to tractor via standardized EBS interface (ISO 11992)
- For proper display, the tractor must be capable of transmitting and displaying these data
Braking system:
- Braking system according to EU regulations with EBS-E (2S2M)
Electrical system:
- Electrical system in accordance with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3)
- All LED side marker lights flash with turn indicator
- ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel construction:
- Steel construction of high-strength fine-grain steels
- Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork:
- Entire steel construction automatically shot-blasted after welding
- Second blasting with corundum for optimal coating adhesion
- Complete vehicle chassis coated with HRM metallization using ZINACOR 850 (85% zinc / 15% aluminium) for premium corrosion protection
- Top coat with 2 layers of 2K paint in RAL 3002 carmine red, single-color, according to RAL system 841GL
- Rims in silver
- Rear section metallized and painted in RAL 9010 (pure white)
- No metallic paint possible
- Paint system tested in salt spray test according to ISO 9227-NSS
- Cavity sealing with special wax
Including the following additional equipment:
- 2-inch kingpin
- One galvanized steel front wall, approx. 400 mm high
- Remote-steered axles from front and rear via cable control with pushbuttons, with single-track monitoring (without installation in tractor unit)
- Hydraulic connections from gooseneck to lowbed with multi-coupler instead of threaded couplings
- Electro-hydraulic power unit
- Prepared for installation of bolted container mounts for 1x 20' or 1x 40' container on outer beams
- Without container locks
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLE3-Achs-Tiefbett 3x10 t Außenträger
Pokliči
Stanje: novo, največja dovoljena obremenitev: 36.040 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website.
Excerpt from the equipment list. Full specification available on request.
Gooseneck:
* Gooseneck in SNT design to optimize loading deck length, approx. 3,750 mm long
* Gooseneck hydraulically liftable/lowerable and detachable
* For tractor units: 6 x 4 or 8 x 4
Bsdpfx Aboy Uwu Ij Telh
Lowbed:
* Lowbed with exterior beams, extendable, SUPER LOW design, approx. 8,000 mm long
* Lowbed with fixed hardwood flooring approx. 40 mm thick and mechanical locking
* Supply lines routed protected within the extendable beams, automatically adapting to the lowbed length
* 7 pairs of folding lashing rings outward (LC 10,000 daN)
* 6 pairs of threaded mounting blocks on the inner beam for screwable RUD rings
Rear chassis:
* Rear chassis with closed outer frame and tread plate cover
* Chassis with excavator recess, closed in the rear half to house air tanks
* 3 pairs of folding lashing rings outward (LC 5,000 daN)
* 1 pair of folding lashing rings outward (LC 10,000 daN)
* 1 pair of horizontal lashing rings, positioned front & rear on the chassis (LC 10,000 daN)
Axles:
* BPW axles and suspension, all axles with hydro-mechanical forced steering
* Technical axle load: 12,000 kg each
* Air suspension with lifting and lowering valve
Tyres:
* Tyres 245/70 R 17.5 3PMSF – manufacturer at choice. Load index (146/146F)
Braking system:
* WABCO braking system according to EU regulations with EBS-E (2S2M)
Coating:
* HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection
* Finished with 2 coats of 2K paint, single-colored in RAL 3002 Carmine Red, per RAL System 841GL
Includes accessories:
* 2-inch kingpin
* One galvanized steel front bulkhead, approx. 400 mm high
* At the galvanized front connection strip, yellow-red air couplings
* Remote axle steering, from front and rear, operated by cable remote control with push buttons, including axle alignment monitoring (without installation on the tractor unit)
* Preparation for bolt-on container lockings to accommodate 1 x 20', 1 x 40', or 1 x 45' container on the outer rails. Without container locks
* Hydraulic connections from gooseneck to lowbed with a multicoupling instead of screw couplings
* Electrohydraulic unit
* Spiral cable (approx. 35 mm², approx. 3.5 m in length, max. 250A) for the power supply to the electrohydraulic unit and/or the electric winch, with plug connection (NATO-NATO) between trailer and tractor unit
* Yellow reflective tape according to EU regulations, on the sides, extension, and at the rear of the trailer
* At the gooseneck front and rear left and right, each with a holder for warning signs, including socket
* Manual and documentation on USB stick
* Central lubrication system with 2 pumps BEKAMAX (Pico) with standard grease NLGI-2 and removable protection for the pumps
* 7 pairs of threaded blocks between the lashing rings under the top flange on the outer rail for mounting screwable RUD rings VLBG-4
* 2nd ride height, approx. 50 mm above standard ride position, selectable via manual control
* On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm)
* Separate air connection with air gun on the gooseneck
* A stainless steel toolbox, INOX, approx. 1,350 x 400 x 400 mm
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Pokliči
Stanje: novo, največja dovoljena obremenitev: 37.680 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the specification. Full specification available on request.
Gooseneck
* With approx. 30 mm thick hardwood flooring; gooseneck in straight design at the rear
* 3 pairs of lashing rings (LC 5,000 daN)
Loading Platform
* Extendable version
* 5 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
* Cut-outs in the outer frame of the loading deck for attaching tension belts (LC 2,000 daN)
* Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Landing Legs
* JOST mechanical landing legs with 2-speed gearbox for lifting capacity approx. 24 t (test load approx. 50 t)
Tyres
* 205/65 R 17.5
Axles
* BPW axles and suspension
* 1st axle rigid, remaining axles hydro-mechanically forced-steered
* Air suspension with lift and lower valve
Brake System
* In accordance with EU regulations, with EBS-E (4S3M), no interconnection lines to the tractor unit
Steel Construction
* Made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork
* Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc-rich primer
* High-quality two-component (2K) topcoat, single-colour RAL 3002 carmine red
* Wheels painted silver
Included Accessories
* 2-inch king pin
* Galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on the galvanised front connection strip
* 4 chocks with holders mounted on the front wall
* Spare wheel holder in front of front wall
* Electro-hydraulic unit
* Remote rear- and front axle steering via cable remote control with push buttons, includes single-track monitoring for axles (no installation in the tractor unit required)
Blodpsv Etx Eofx Ab Tjh
* European reflector boards (red-yellow) at rear of trailer
* Yellow reflective tape complying with EU regulations on the sides, extension and rear
* On gooseneck and rear plate—left and right—each with holder for warning boards including connector
* Mount for rotating beacon at the rear of the trailer
* Galvanized folding supports below the bevel of the loading platform
* Axle load pressure gauge including axle-load diagram
* 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the platform, 1x 40' container above the gooseneck, or 2x 20' containers
* Support bracket with 1 pair of WADER container pockets, kingpin load approx. 20,000 kg
* 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm at the outer frame of the load platform
* Galvanized extensions, extendable by approx. 230 mm per side
* Movable hook-in rails for aluminium drive-on ramps at the rear of the vehicle
* 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN)
* 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
* BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable guard for the pump
* 2 LED reversing lights mounted at the rear
* Acoustic reverse warning signal
* HRM metallisation (High Resistance Metallisation)
Mali oglas
Sittensen
887 km
Polpriklopnik
FAYMONVILLEILO-3 Innenlader, 9.530mm, mehrfach auf Lager
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 34.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2015, dolžina tovornega prostora: 9.530 mm, širina tovornega prostora: 1.565 mm, višina nakladalnega prostora: 1.650 mm, skupna širina: 2.550 mm, skupna višina: 2.800 mm, Oprema: ABS, Betonski notranji nakladač, nakladalna dolžina: 9530 mm, nakladalna širina: 1.565 mm, v nakladalnem prostoru kotni profili za sprejem palet, hidravlično varovanje tovora, po 6 obročev za pritrditev težkih bremen na vsaki strani, zunanji NATO zagonski priključek, ABS, EBS, BPW Eco os(i), bobnaste zavore, podstavki spredaj, vozilo je lahko polepljeno z reklamami in/ali označeno.
Blodpfx Aeymu Iueb Teh
SI86628
Naša ponudba je načeloma brez nove TÜV homologacije. Če želite novo TÜV homologacijo, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno z reklamami in/ali označeno. Veljajo naši splošni pogoji dobave in plačila.
Za ta objekt vam z veseljem pripravimo tudi ponudbo financiranja ali leasinga.
Prosimo, kontaktirajte nas!
Mali oglas
Sittensen
887 km
Polpriklopnik
FAYMONVILLEILO-3 Innenlader, 9.550mm, mehrfach auf Lager
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 34.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2007, dolžina tovornega prostora: 9.550 mm, širina tovornega prostora: 1.570 mm, višina nakladalnega prostora: 1.650 mm, skupna širina: 2.550 mm, skupna višina: 2.800 mm, Oprema: ABS, Notranji nakladalnik za beton, dolžina nakladanja: mm, širina nakladanja: 1.530 mm, v nakladalnem prostoru kotni profili za namestitev palet, hidravlično varovanje tovora, 5x pritrdilni obroči za težke obremenitve na vsaki strani, zunanja zagonska vtičnica NATO, ABS, EBS, BPW Eco os(i), bobnasta zavorna naprava, sprednje podporne noge, vozilo je lahko polepljeno in/ali označeno z oglaševanjem.
SI86625
Naša ponudba je praviloma brez nove TÜV homologacije. Če želite novo TÜV homologacijo, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Veljajo naši splošni pogoji dostave in plačila.
Za ta objekt vam z veseljem pripravimo ponudbo financiranja ali leasinga.
Prosimo, kontaktirajte nas!
Bjdpsymu Inofx Ab Tslh
Mali oglas
Landsberg am Lech
379 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLESTBZ-3VAU-abfahrbarer Hals ausziehbar
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2000, B= 12000 mm
Teža praznog vozila 11300 kg
STZ-V-labudova vrata
pomerajuće unapred za utovar sa prednje strane
zamenjiv 2" - čep/kraljevski zatik
ugrađen hidromehanički sistem upravljanja
hidraulična funkcija podizanja i spuštanja, uključujući cilindar za oslonac
projektovano za tehničko opterećenje sedla do 18 tona
aluminijumske bočne stranice, sa sve četiri strane
radijus zakretanja 2400 mm
Most platforme sa niskim ležajem
dužina ravnog dela 5.000 mm, teleskopski produživa za 2.300 mm
širina ravnog dela 2.550 mm
visina konstrukcije 280 mm
napred kukice za spajanje sa STZ-V-labudovim vratima
2 klinaste rampe za uspon na prednjem delu mosta sa niskim ležajem
visina utovara oko 450 mm
3-osovinski trap
zračno ogibljenje (DxŠ) cca 4.500 x 2.550 mm, uključujući ventil za podizanje i spuštanje,
sa 3 prinudno upravljane osovine,
Proizvođač: SAF, međuosovinski razmak 2x 1.310 mm
Visine vožnje 970 mm
Kočioni sistem dvocevni, pneumatski kočioni sistem na sve točkove
Bsdpfoy Hgh Usx Ab Tjlh
preklopive proširenja u niskom ležaju
visina sedla pod teretom: 1.250 mm
sve 3 osovine hidraulički prinudno upravljane sa funkcijom naknadnog upravljanja
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
FaymonvilleMAX Trailer 3-Achs-Tele-Semi-nachlaufg.
Pokliči
Stanje: rabljeno, lastna masa: 10.350 kg, največja dovoljena obremenitev: 37.650 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2018, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: oranžna, Leto izdelave: 2018, obratovalna teža: 10.350 kg, Oprema: ABS,
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMegamax Tiefbett 2x12 t PA
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 36.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2024, naslednji pregled (TÜV): 10/2026, skupna širina: 2.550 mm, Oprema: ABS, Our entire vehicle inventory, including immediately and soon available vehicles, can be found on our website.
Partial list of equipment. Full equipment details available upon request.
Gooseneck:
* Gooseneck in SNT design to optimize platform length, approx. 3,750 mm long, hydraulically liftable/lowerable and detachable
* Technical fifth-wheel load: 25,000 kg
* Suitable for tractors: 4x2, 6x2, and 6x4
Lowbed:
* Lowbed designed as a telescopic vessel bridge in low-profile construction with front extension and mechanical locking
* Length x width approx. 6,850 mm x 2,540 mm
* Supply lines are protected inside the extendable beams and automatically adjust to the respective lowbed length
Axles and Suspension:
* PENDLE AXLE
* All axles hydro-mechanically forced-steered
* Hose rupture valve on axle compensation
* Cylinders with automatic RESET function
* Hydraulic cylinders fitted with shut-off valves and quick-connect pins for securing in raised position
* Technical axle load: 12,000 kg per axle
* Hydraulic axle compensation
* Tires: 245/70 R 17.5
* Rear chassis with closed outer frame, checker plate cover, continuous prism excavator trough approx. 1,250/700 x 505 mm, open at rear
Braking System:
* WABCO EBS-E braking system compliant with EU regulations, without connection cable to tractor unit
Paintwork:
* Trailer color: RAL 3002 Carmine Red
Included Accessories:
* Detachable steel front wall, approx. 400 mm high
* 3 kW electro-hydraulic power pack for hydraulic functions (excluding hydraulic winches; supply connection installation to the tractor not included)
Blsdpfsx Uvllex Ab Toh
* Outer beams of the gooseneck with mounting holes for bolted lashing rings; first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN)
* 1 lashing ring each left and right on the rear inclination of the gooseneck (LC 6,000 daN)
* 2” king pin
* One locking point approx. every 500 mm on the extension
* 1 pair of steel ramps with climbing strips and locking bolts for bridging the deep-bed hook supports
* 1 lashing ring each left and right on the front cross member (LC 10,000 daN)
* Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the inner beams of the platform
* Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the outer beams of the platform (LC 10,000 daN) on the top flange of the outer beams
* Recesses above the lashing rings
* 1 hanging lashing ring each left and right on the rear cross member (LC 10,000 daN) on the outer beams of the platform
* Preparation for removable load floor
* Hook-in rail at the front of the rear chassis to the lowbed for loose approach ramps
* Chassis with chamfered corners at the rear
* Hook-in rail for loose aluminum approach ramps at the rear traverse of the vehicle
* Remote steering from front and rear via cable remote control with pushbuttons, axle tracking control, no installation in the tractor unit
* Mechanical pin-tab coupling from lowbed to chassis for deck change or addition of extension beams, with electro-pneumatic-hydraulic couplings
* Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917)
* 2 axle load gauges installed on the left side
Including special accessories:
* 1 pair of detachable anodized aluminum side walls on the gooseneck, approx. 400 mm high
* A
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 34.030 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2026, skupna širina: 2.480 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website.
Excerpt from the equipment list. Complete configuration upon request.
Gooseneck:
* Gooseneck with rear bevel, approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick loading area; loading area behind the gooseneck hydraulically raisable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8°
* 6 pairs of fold-out lashing rings (LC 5,000 daN)
* 2 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of inward folding lashing rings on the front central beam (LC 10,000 daN)
* Grating floor C40/4 (point load approx. 2.3 t on an area of ca. 20 x 20 cm) over axles with checker plate covering
Two-piece steel ramps:
* One pair of galvanized, two-piece reinforced steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating floor C40/5 (point load approx. 8 t on an area of ca. 20 x 20 cm)
* Ramp with hydraulically folding and retractable ramp sections and hydraulic lifting device, max. load per pair: 40,000 kg
* In accordance with regulation 1230/2012/EU, ramps shorter than 300 mm do not count towards the vehicle length of 16,500 mm in driving position
Landing gear:
* JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
* Tires 235/75 R 17.5 3PMSF
* TPMS tire pressure monitoring system according to ECE R 141
Axles:
* BPW axles and suspension
* 2 fixed axles, 1 self-steering trailing axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock activated via reverse gear and manually
* Air suspension with lift and lower valve
Braking system:
* WABCO braking system in accordance with EU regulations, with EBS-E (2S2M)
Colours:
* Semi-trailer RAL 3002 carmine red
* Rims silver
* Tarpaulin in RAL 9006 silver
Incl. accessories:
* 1 spare wheel holder under the load bed, right hand side
* 2-inch kingpin
* Galvanized steel front wall
* Yellow-red air couplings at the front galvanized connection rail
* 4 wheel chocks with holder at the front wall
* 3 heights of wooden planks
* Galvanized folding supports under the loading area bevel
* Height-adjustable tarpaulin body, approx. 3,960 mm
* Galvanized front wall with a tensioning system for sliding curtains
* Roof by EDSCHA, height-adjustable by approx. 400 mm, forward slidable on aluminum roof rail profiles (bolted to front and rear wall)
* 3 pairs of movable stakes/restraining pillars in the load bed
Bjdpfx Abjy Nu Hkj Tjlh
* Structure at the rear can be hydraulically widened to the left and right by approx. 750 mm
* Sliding tarpaulin with approx. 700 mm reserve in length, with tensioning straps spaced at approx. 600 mm height
* Upper edge of the body approx. 3,960 mm (loaded)
* Driving with open sliding roof is not permitted and will damage the tarpaulin
* Non-slip sand coating painted on checker plate sheets on the gooseneck and load bed
* Cover plates to bridge the gap between the ramps and loading area
* Electro-hydraulic unit mounted at the rear under the load bed
* Mounting brackets for warning signs on both sides of the gooseneck and ramps, including socket
* Control valves for the ramps on the right side of the semi-trailer
* Grating floor C30/3 in the bevelled area of the gooseneck (point load approx. 2 t on a 20 x 20 cm area)
* Grating floor in the bevelled area of the loading a...
Mali oglas
Hedensted
1.133 km
Priklopnik za platformo
FaymonvilleExtendable / Ausziehbarer auflieger
Pokliči
Stanje: dober (rabljeno), številka stroja/vozila: YAFTL6002R0035345, dolžina tovornega prostora: 14.800 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 9.000 mm, Leto izdelave: 2024, = Dodatne možnosti in oprema =
- Zračno vzmetenje zadaj
- Zračno vzmetenje spredaj
- Bobnasti zavorni sistem
= Dodatne informacije =
Nosilnost: 81.100 kg
Skupna dovoljena masa: 81.100 kg
Tehnično stanje: dobro
Vizualno stanje: dobro
Stanje sprednjih pnevmatik: 60
Sprednje pnevmatike: 245/70 R17.5
Zadnje pnevmatike: 245/70 R17.5
Bsdpox Rtiajfx Ab Tolh
Zadnji pregled: 28.12.2025
Za več informacij kontaktirajte Lastas Sales.
Znak zaupanja
Prodajalci, certificirani pri TruckScout24

Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Planenaufbau
Pokliči
Stanje: novo, največja dovoljena obremenitev: 40.320 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website.
Selection of equipment. Complete specification available on request.
Gooseneck:
* Gooseneck with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick. Loading area with 5 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN)
* Hardwood flooring approx. 48 mm thick, checker plate covering above the axles
Landing Gear:
JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Tyres:
* 205/65 R17.5 tyres – manufacturer of our choice
TPMS:
* TPMS tyre pressure monitoring system in accordance with ECE R 141
Axles:
* BPW axles, two rigid and two self-steering axles
Bledey Aug Dspfx Ab Tjh
* Air suspension with lift/lower function
* Drum brakes
* Self-steering axles with electromagnetic reversing lock, activated via reverse gear or manually
Brake system:
* WABCO brake system compliant with EU regulations and EBS-E (4S3M)
Electrical system:
* Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with indicator
* ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Steel construction:
* Steel structure made of high-strength fine grain steel
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork:
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection
* Trailer colour RAL 3002 Carmine Red
* Rims Silver Grey
* Tarp RAL 9006 (brilliant direct)
Options included:
* At the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket
* 2-inch king pin
* One galvanized steel front wall
* Yellow-red air couplings at the galvanized front connection strip
* 4 wheel chocks with holder on the front wall
* 3 tiers of wooden boards
* Galvanized folding supports under the loading area bevel
* One bracket for a revolving warning light at the rear end of the trailer
* Height-adjustable curtain structure – approx. 3,960 mm?
* Galvanized front wall with tensioning mechanism for sliding curtains. Height adjustable by approx. 400 mm
* Roof brand EDSCHA, can be slid forward on ALU roof profile beams (bolted to front and rear wall)
* 3 pairs of movable stanchions in the loading area
* Body hydraulically extendable to the left and right at the rear by approx. 750 mm
* Sliding roof with fold-up portal beam
* Sliding tarp with 700 mm reserve in length; tie-down straps at approx. 600 mm intervals. Height upper edge of body approx. 3,960 mm (loaded)
* Driving with the sliding roof open is not permitted and will damage the tarp
* Body at the rear closed with anodized ALU swing doors
* Latch-on rail for ALU loading ramps at the rear of the vehicle
* Control valves for hydraulic widening fitted to the right-hand side of the trailer
* White reflective tape as per EU regulations on the sides, red at the rear
* Electro-hydraulic unit under the rear loading area
* One mudguard at the rear of the trailer
* European reflective signs (red-yellow) at the rear of the trailer
* Hand…
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMultimax Satteltieflader (1+2) - nachlaufgelenkt
Pokliči
Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website.
Excerpt from the equipment. Full equipment details available on request.
GOOSENECK:
* Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10°
* For tractor units: 4 x 2, 6 x 2, and 6 x 4
* Steel front bulkhead, removable, approx. 400 mm high
* ASPÖCK-UNIBOX
* 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches
* Approx. 40 mm thick hardwood cover above the gooseneck
* 2-inch kingpin
* Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide
* Receptacle at the rear of the gooseneck for aluminum drive-on ramps
* Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917)
* 4 wheel chocks with holders in front of the bulkhead
* 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail)
EQUIPMENT:
Blodpoy Auh Iofx Ab Tjh
* Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10°
* Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H)
* Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length
* TPMS tire pressure monitoring system according to ECE R 141
* BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following
* 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually
* Technical axle load: 12,000 kg each, air suspension with lift and lower valve
* 235/75 R 17.5 3PMSF twin tires. Make at our discretion
* Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg
* Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction)
* 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements
* Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate
* 1 pair of lashing rings on front crossbeam (LC 10,000 daN)
* 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN)
* 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D)
* Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings)
* 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle
* Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area
* Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings)
* Aluminum elements lockable on the extension beams of the widenings
* 1 pair of mechanical rear supports
* 1st axle with traction aid
* Sandblasted and painted in single color according to RAL code
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMAX110 Semi-Tieflader
Pokliči
Stanje: novo, največja dovoljena obremenitev: 36.590 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website.
Excerpt from equipment specifications. Complete equipment list available on request.
Neck:
* Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick
Loading Area:
* Extendable loading area with rear bevel approx. 1,000 mm x 8°
* 5 pairs of fold-out external lashing rings (LC 5,000 daN)
* 3 pairs of fold-out external lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN)
* Cut-outs in the external frame of the loading area for securing straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, checker plate over the axles
Tyres:
* Tyres 245/70 R 17.5 3PMSF – brand at our discretion. Load index (146/146F)
TPMS:
* TPMS tyre pressure monitoring system compliant with ECE R 141. Data transfer to the tractor unit via the standardised EBS interface according to ISO 11992. For correct display, the tractor unit must support receiving and displaying this data.
Landing Legs:
* JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, all axles hydromechanically forced-steered
* Technical axle load: 12,000 kg per axle
* Air suspension with lifting / lowering valve
* Axle tool
Brake System:
* WABCO brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit
Steel Construction:
* Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical System:
* Electrical system according to EU regulations, 24V lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15 pin. Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Paintwork:
* Complete steel structure is automatically shot-blasted with a centrifugal blasting machine after welding
* Second sandblasting with corundum for optimal adhesion of the coating system
* Final paint with 2 coats of 2K topcoat, single colour in RAL 3002 carmine red, according to RAL system 841GL
* Rims in silver grey
* Rear section metallised and painted in RAL 9010 (pure white)
Accessories:
* 2-inch king pin
* One galvanised steel front wall approx. 400 mm high
* Yellow-red air couplings on the galvanised front connection rail
Bedpfxjy Auifo Ab Telh
* Spare wheel holder in front of the front wall (without spare wheel)
* Electro-hydraulic power pack
* Remote steering front and rear via cable remote control using push buttons, with single-track monitoring of the axles (without installation in the tractor unit)
* Mounting rail for aluminium ramps at the gooseneck with integrated collision protection
* Gooseneck and rear plate each fitted left and right with a bracket for warning boards incl. socket
* Bracket for a rotating beacon at the rear of the trailer
* Galvanised folding supports beneath the loading area’s rear bevel
* 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN)
* Load gauge for determining axle loads including load diagram
* Sanded coating applied to the checker plates on the gooseneck and loading area for slip resistance
* Gooseneck fitted with plug-in aluminium side and rear panels, approx. 2,440 x 400
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 58.860 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website.
Excerpt from the equipment list. Full specification available on request.
Gooseneck:
* Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approx. 30 mm thick
Extendable loading platform:
* Extendable loading platform with rear chamfer approx. 500 mm x 8°
* 8 pairs of outward-folding lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN)
* Hardwood flooring, approx. 48 mm thick; checker plate flooring over the axles
Two-piece steel ramps:
* One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating
* Ramp with hydraulically folding and unfolding ramp sections
* Hydraulic lifting mechanism, hydraulically adjustable
* Maximum load per pair: 50,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm when in driving position
Axles:
* BPW axles and suspension, 1st axle with steering, 2nd and 3rd rigid, 4th and 5th axles trailing-steered, air suspension, with raise/lower function, drum brakes
* Trailing steering axles with electromagnetic reverse lock, activated via reverse gear or manually
* Technical axle load: 12,000 kg each
Tyres:
* Tyres 235/75 R 17.5 3PMSF – make of our choice
TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck via standardized EBS interface according to ISO 11992. For correct display, the truck must be capable of receiving and displaying this data
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Brake system:
* Wabco brake system in compliance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit
Steel structure:
* Steel structure made from high-tensile fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Electrical system:
* Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Paintwork:
* Complete steel structure automatically shot blasted after welding with a blast wheel system
* Second blasting treatment with corundum for optimum adhesion of the coating system
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection
* Final paint finish with two coats of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL
* Rear section metallized and painted in RAL 9010 (pure white)
Including the following additional equipment:
* 2-inch king pin
* One galvanized steel front wall, approx. 400 mm high
* A spare wheel carrier in front of the front wall
Bljdoy Augwjpfx Ab Toh
* Yellow-red air couplings at the galvanized front connection strip
* A bracket for a rotating beacon at the rear of the trailer
* Galvanized supports under the chamfered section of the loading platform
* Super Grip 2 rubber coati
Olajšamo vam iskanje: "faymonville f-s42-1aca"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.



























































































































































































































































































