Rezkanje (gradbeništvo) nakup rabljenega (11)

Stanje: novo, Leto izdelave: 2025, delovna širina: 3.000 mm, Hektar (ha) - Premer rezalnika Ø 760 mm, omogoča globlje rezanje - robustna in tiha spiralna prenava - Prenava, zasnovana za 220 KM - rotor, pogonjen s verigo in opremljen s kaljenimi verižnimi zobniki Djdpfx Aqjzqwpueqokr - pokrov, nameščen na vzmeteh - pokrov natančno prilagojen radiju rezil, kar povzroči manjše prileganje zemlje - brez mrtvih kotov v ohišju - varjene nosilce rezil na gredi rotorja - popolna razdrobljenost zemlje zaradi zamaknjene razporeditve rezil - hidravlična nastavitev za izmet zemlje iz kovinske posode - kamasta sklopka - hidravlično pogonjen valj za pritisk na nasip

Stanje: rabljeno, delovna širina: 3.000 mm, * 4 vrste, vsaka po 75 cm * Na voljo so pokrovi iz nerjavečega jekla/oblikovalniki grebenov Djdpfx Aqezqwkfjqokr * Robustna izvedba za gojenje krompirja in korenja Stanje: Kultivator ima okvaro menjalnika in se zato izrecno prodaja kot okvarjena naprava, naprava za ljubiteljsko uporabo ali vir nadomestnih delov.

Stanje: novo, Seppi M. KASTOR hidravlična naprav za odstranjevanje korenin / DEMO naprava / Letnik: 2023 / Na zalogi in takoj na voljo Cena: 26.290,00 € neto / 31.285,10 € bruto - Širina rezalne plošče: 0,11 m - Premer rezalne plošče: 0,90 m - Skupna širina: 0,88 m - Globina: 1,80 m - Višina: 1,30 m - Teža: 868 kg - Naprava za odstranjevanje korenin za pritrditev na bager - Za odstranjevanje korenin in debel - Reže korenine in debla do globine 50 cm - Za bagre od t - Za pritrditev na različne priključne plošče - Pogon predviden za hidravlični motor, odvisno od pretoka nosilne naprave - Posreden dvojni jermenski pogon z 2 x 5 jermeni - Hidravlično nastavljiv pokrov - Zaščita z dvojnimi verigami - Rotor s 50 fiksnimi orodji s karbidnimi vstavki - Barva: rdeča RAL3020 · antracit RAL7021 OPT 074 Dva aksialna batna hidravlična motorja F12-80 cm³ z varnostnim ventilom - Prostornina v cm³: 2 x 80 - Potreben hidravlični tlak v barih (min-max): 200 - 350 - Potreben hidravlični pretok v l/min (min-max): 140 – 220 Za pogon priporočamo avtonomni hidravlični sistem. Potrebne so 3 hidravlične cevi: dovod, povratni vod in odvod. Za hidravlični pokrov je potreben dodaten dvojno delujoči hidravlični priključek. Naprava je dobavljena brez cevi, priključkov in priključne plošče. Na zalogi imamo številne dodatne priključne plošče (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / itd...) in so takoj na voljo. Na našem skladišču imamo zelo veliko izbiro različnih izdelkov Seppi M., ki so takoj na voljo! Za dodatne informacije se obrnite na nas prek . Po želji vam z veseljem pripravimo tudi ponudbo financiranja. Smo uradni distributer in servisni partner Seppi M. Dkedpfeznru Tjx Aqqsr Smo uradni distributer in servisni partner Magni teleskopskih nakladalcev. Smo uradni distributer in servisni partner DMS. Smo uradni distributer in servisni partner Westtech. Smo uradni distributer in servisni partner JCB gradbenih strojev. Smo uradni distributer in servisni partner Mercedes-Benz. Smo uradni distributer in servisni partner Iveco. Smo uradni distributer in servisni partner Holp. Smo uradni distributer in servisni partner OilQuick. Poleg tega smo z 800 rabljenimi vozili eden največjih trgovcev z gospodarskimi vozili v Nemčiji. Za vas dobavimo celoten program Seppi M! Pridržujemo si pravico do sprememb in napak! = Dodatne informacije = Lastna teža: 868 kg Za dodatne informacije se obrnite na Mariusa Herdena.

Stanje: rabljeno, Leto izdelave: 2020, Za vprašanja glede priključnih strojev vam z veseljem pomaga gospod Herden (telefonska številka: ). KEMROC EXR 60 HD frezalni stroj za obdelavo površin / asfaltni frezalni stroj / frezalni stroj / vključno z adapterjsko ploščo MS10 / leto izdelave: 2020 / na zalogi in na voljo takoj Cena: 23.890,00 € neto / 28.429,10 € bruto Širina frezanja: 600 mm Nastavljiva globina frezanja: 0 – 190 mm Priporočene vrtljaje: 70 – 95 vrt/min Priporočena količina olja pri 100 barih: 150 – 200 l/min Minimalna količina olja: 150 l/min Maksimalna količina olja: 210 l/min Maksimalni hidravlični delovni tlak: 380 bar Navor pri 350 barih: 9.300 Nm Rezna sila pri 350 barih: 28 kN Delovna teža: 1.400 kg Dodpeznrumjfx Aqqekr Število rezalnih plošč: 69 kosov Priporočena teža bagra: 15 – 23 ton Nazivna moč: 80 kW Oprema: - vključno z adapterjsko ploščo MS10 - vključno z rezervnimi rezalnimi ploščami - vključno s hidravličnimi cevmi, glej fotografije - vključno s transportnim podvozjem Na zalogi imamo veliko adapterjskih plošč (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / itd...) in so na voljo takoj. Na našem skladišču imamo zelo veliko izbiro različnih priključnih strojev, ki so na voljo takoj! Gospod Herden (telefonska številka: ) vam z veseljem pomaga. Po želji vam z veseljem pripravimo tudi ponudbo za financiranje. Smo uradni distributer in servisni partner družbe Westtech. Smo uradni distributer in servisni partner družbe Gierking GMT. Smo uradni distributer in servisni partner družbe OilQuick. Smo uradni distributer in servisni partner družbe Weber MT. Smo uradni distributer in servisni partner družbe Holp. Smo uradni distributer in servisni partner družbe DMS. Smo uradni distributer in servisni partner družbe Seppi M. Smo uradni distributer in servisni partner družbe Magni za teleskopske viličarje. Smo uradni distributer in servisni partner družbe JCB za gradbene stroje. Smo uradni distributer in servisni partner družbe Mercedes-Benz. Smo uradni distributer in servisni partner družbe Iveco. Poleg tega smo z 800 rabljenimi vozili eden največjih trgovcev s komercialnimi vozili v Nemčiji. Pridržujemo si pravico do sprememb in napak! Notranja številka: 100439 = Dodatne informacije = Za dodatne informacije se obrnite na Mariusa Herdna.

Stanje: rabljeno, moč: 22 kW (29,91 KM), konfiguracija osi: 4x4, Leto izdelave: 1989, obratovalne ure: 1.031 h, Oprema: pogon na vsa štiri kolesa, Drive: Wheel Unladen weight: 3,855 kg Engine make: Deutz Dodevf Hduopfx Aqqskr For further information, please contact J.A.J. Jansen.

Stanje: rabljeno, konfiguracija osi: 4x4, Leto izdelave: 2002, obratovalne ure: 1.105 h, Oprema: pogon na vsa štiri kolesa, Drive: Wheel Djdoydmz Uopfx Aqqekr Engine brand: Deutz Contact J.A.J. Jansen for further information.

Stanje: rabljeno, moč: 32 kW (43,51 KM), konfiguracija osi: 4x4, Leto izdelave: 1999, obratovalne ure: 1.434 h, Oprema: pogon na vsa štiri kolesa, Drive: Wheel Engine brand: Deutz Contact J.A.J. Jansen for further information. Dkodpfxjuurbyo Aqqer

Stanje: rabljeno, konfiguracija osi: 4x4, Leto izdelave: 1999, obratovalne ure: 1.783 h, Oprema: pogon na vsa štiri kolesa, Drive: Wheel Engine brand: Deutz Dkodpfsydmz Iex Aqqsr Contact J.A.J. Jansen for further information.

Stanje: skoraj kot novo (rabljeno), moč: 250 kW (339,91 KM), barva: bela, skupna masa: 2.900 kg, Stehr Soil Stabilization Mixer SBF 24 L – Year of Manufacture 2022 – Like New Condition For sale is a Stehr SBF 24 L soil stabilization mixer from 2022, in very well-maintained and almost new condition. The machine has only been used for approximately 50 operating hours, exclusively for light soil work (including clay/loamy soil). Its condition speaks for itself – wear parts show minimal wear, with some tools even still retaining the original paint. Technical Data: • Manufacturer: Stehr Baumaschinen GmbH • Model: SBF 24 L • Year: 2022 • Weight: approx. 2,900 kg • Operating pressure: max. 210 bar • Drive: PTO (tractor) • Working width: approx. 2.40 m Features / Condition: • Very low wear (tools, rotor, housing) • Ready for immediate use • Robust design for soil stabilization, lime/cement mixing, etc. • Low maintenance • No known defects Dkodpfx Asyzd Rvoqqsr Special Features: The machine was only briefly used within the owner's company and has since been stored dry and well cared for. Ideal for earthworks, soil improvement, recycling, or road construction. Availability: Available at short notice by arrangement.

Stanje: novo, For inquiries regarding the attachment, Mr. Herden will be happy to assist you by phone. Dkjdpfx Aqeyltvzoqjr Seppi M. KASTOR hyd to / Stump Grinder / NEW / In stock & ready for immediate delivery Price: €27,790.00 net / €33,070.10 gross - Cutting disc width: 0.11 m - Cutting disc diameter: 0.90 m - Overall width: 0.88 m - Depth: 1.80 m - Height: 1.30 m - Weight: 868 kg - Stump grinder for excavator mounting - Designed for removing stumps and tree roots - Grinds stumps and roots to a depth of up to 50 cm - For excavators of xx t (specification missing) - For installation on various mounting plates - Drive intended for hydraulic motor depending on the carrier device's oil flow rate - Indirect double V-belt drive with 2x5 V-belts - Hydraulically adjustable hood - Double chain protection - Rotor with 50 fixed tungsten carbide tools - Color: red RAL3020 · anthracite RAL7021 OPT 074 Two axial piston hydraulic motors F12-80 cm³ with pressure relief valve - Displacement in cm³: 2 x 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow in l/min (min-max): 140 – 220 An autonomous hydraulic system is recommended for operation. Three hydraulic lines are required: supply, return, and drain. Additionally, a double-acting hydraulic connection is needed for the hydraulic hood. The implement is supplied without hoses, connectors, or mounting plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a very large selection of various Seppi M. products ready for immediate delivery in our warehouse! Simply contact us for more information. Upon request, we would be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = Further information = Contact Marius Herden for more details.

Stanje: novo, For questions regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MIDI-KASTOR / 5-15t / Stump Grinder / NEW / in stock & immediately available Price: €15,290.00 net / €18,195.10 gross - Milling disc width: 0.10 m - Milling disc diameter: 0.60 m - Overall width: 0.80 m - Depth: 1.10 m - Height: 1.15 m - Weight: 450 kg - Stump grinder for excavator attachment - For removing stumps and tree roots - Grinds tree stumps and roots up to 30 cm deep - For excavators from 5–15 t - Suitable for installation on various mounting plates - Drive designed for hydraulic motor, depending on carrier's hydraulic flow - Indirect V-belt drive with 5 V-belts - Protection with double chains - Rotor equipped with 32 fixed, carbide-tipped tools - Color: red RAL3020 · anthracite RAL7021 OPT 073 PISTON MOTOR Axial piston hydraulic motor F12-60 cm³ with pressure relief valve - Displacement in cm³: 60 - Required hydraulic pressure in bar (min-max): 200 – 350 - Required hydraulic flow in l/min (min-max): 70 – 100 Djdpfx Ajyl Hggsqqjkr Optional: MS08 adapter plate incl. bolts and installation = €750.00 net An independent hydraulic system is recommended for the drive. Three hydraulic lines are required: supply, return, and drain. The unit is supplied without hoses, fittings, or mounting plate. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We stock a wide range of Seppi M. products, all available for immediate delivery! Contact us simply at / . Upon request, we are happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are the official sales and service partner for Magni telehandlers. We are the official sales and service partner for DMS. We are the official sales and service partner for Westtech. We are the official sales and service partner for JCB construction machines. We are the official sales and service partner for Mercedes-Benz. We are the official sales and service partner for Iveco. We are the official sales and service partner for Holp. We are the official sales and service partner for OilQuick. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Subject to errors and prior sale! = Further information = Contact Marius Herden for more information.