Prikolica za prevoz konj

MENKE-JANZEN Menke Tandem 3,5 to Vollalu " Neu" Viehanhänger

WS Trucks GmbH: Your Reliable Partner for Commercial Vehicles

Expertise and Service from a Single Source

WS Trucks GmbH is your reliable partner for buying and selling commercial vehicles. With over 25 years of experience, we offer a comprehensive selection of used and new trucks, livestock transporters, refrigerated vehicles, trailers, and semi-trailers.

----
Weights & Dimensions
* Permissible gross weight: 3,500 kg
* Support load: 100 kg
Body dimensions (internal):
* Length: approx. 4,500 mm
* Width: approx. 1,950 mm
* Height: approx. 2,000 mm

----
Chassis & Running Gear
* Welded chassis frame made from aluminium profiles
* Rubber-suspended axle assembly
* Axle load: 2,500 kg per axle
* Axle spacing: 800 mm
* Wheels: 195 R14 C 8PR, 5-bolt
* 4-wheel overrun brake with reverse automatic feature
* Lighting system according to StVZO

----
Drawbar & Support
* V-drawbar with overrun device for ball-type coupling
* Overrun device for max. support load 150 kg
* Automatically folding jockey wheel, static max. 250 kg
* Spare wheel carrier mounted on front wall
* 2 wheel chocks with holder

----
Mudguards & Lighting Carrier
* 2 aluminium mudguards (tandem design), bent from 3 mm thick aluminium sheet
* Lighting carrier made from aluminium, mounted laterally on corner posts
* Shock-protected mounting of rear lights
* Number plate with lighting mounted above on roof frame

----
Body & Walls
* Body structure made from special aluminium extruded profiles
* Side walls made from aluminium hollow chamber profiles
* Smooth interior and exterior wall finish
* Front wall made from aluminium profiles

Floor & Drainage
* Floor made from 30 mm thick aluminium elements
* Surface milled longitudinally and transversely
* Hygiene edge at all ramp and door openings
* 1 water drain with sealing cap in the rear floor area

----
Ventilation & Airing
* Vent openings on both sides above the board edges, approx. 300 mm high
* With 2 manually operated sliding aluminium vents
* Vents can be fixed using a snap lock

----
Doors, Roof & Ramp
* Front wall door without ventilation opening
* Clear door width approx. 800 mm
* Clear door height approx. 1,000 mm
* Roof made from fixed, flat layered plastic panel (honeycomb panel)
* Rear wall as loading ramp, approx. 1,600 mm wide
* Spring-assisted
* Ramp running surface made from aluminium checker plate
* Tread surfaces made from bent steel strips
* 2-piece aluminium ramp railing, approx. 1,200 mm high
* Ramp can be opened as a door
* Ramp running surface coated with Marotan
Fpjdpfxolb Scaj Adrjc

----
Interior & Partitioning System
* Swivelling aluminium partition grid, approx. 1,600 mm high
* Partition entirely made from aluminium
* Each partition grid with 2 integrated hand recesses
* Grid can be secured to side wall when open
* Grid can be placed in front of front wall
* Grid can be installed at any side post and centrally
* 2 rows of aluminium barrier gates, split centrally, behind ramp opening

----
Lighting & Electrics
* Interior lighting:
* 1 LED interior light with protective grid
* Switch for interior light mounted in lamp carrier
* Exterior lighting in accordance with ECE Regulation 48
* Deviations from ECE Regulation 48 only upon request and written agreement
* 2 marker lights on lamp carrier
* 1 LED work light on the right side above the loading ramp
* 13-pin connector

----
Accessories & Finish
* 1 plug-in rear underrun guard, reserved at front wall
* Body colour: RAL 9060 silver
* Floor frame colour: RAL 7016 anthracite grey
* Label

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.