Nizki nakladalnik

Faymonville 3-Achs-Semi-hydr. Ladebett-hydr. Rampen-Holzbelag

Gooseneck:
• Gooseneck in SNT design for optimizing the loading deck length, approx. 3,700 mm long
• Rear of gooseneck chamfered approx. 1,000 mm x 6°
• Technical fifth wheel load: 18,000 kg
• Suitable for tractor units: 4x2 or 6x2

Loading Platform:
• Loading platform, approx. 9,400 mm long, with rear taper approx. 900 mm x 6°
• Platform behind the gooseneck, hydraulically liftable and lowerable
• Loading platform length approx. 3,000 mm; load capacity approx. 9,000 kg

Ramps:
• 1 pair of two-piece hydraulic steel ramps, approx. 4,350 x 900 mm
• Hardwood covering
• Hydraulically foldable ramp tips
• Ramps can be hydraulically adjusted individually approx. 235 mm outward and approx. 365 mm inward

Axles and Suspension:
• BPW axles and suspension, two rigid axles, one self-steering axle
• Technical axle load: 12,000 kg
• Electromagnetic reverse lock, activatable via reverse gear and manually
• Air suspension with lift and lower valve
• Axle tool

Tyres:
• 235/75 R 17.5 3PMSF, twin tyres
• Load index 143/141J (144/144F)

Brake System:
• Brake system by WABCO EBS-E, complies with EU regulations

Lighting System:
• 24-volt lighting system, "ASPÖCK-NORDIK full LED" (ASS 3)
• Version complies with EU regulations

Metallization:
• Standard HRM metallization (High Resistance Metallization) of the outer frame
• Complete steel structure shot-blasted, then defined visible areas metallized with ZINACOR 850 (zinc 85% - alu 15%) hot coated

Painting:
• 6-layer final treatment:
• Complete steel structure shot-blasted after welding
• One coat of zinc-based primer, one adhesion primer
• Final paintwork: 2 coats of 2-component acrylic paint, single color in nova grey, then cavity sealing with special wax. Rims in silver.

Steel Structure:
• Steel structure made of high-strength fine-grained steels
• Steel grades:
S355J2+N/S355MC (yield strength 355MPa)
S690QL/S700MC (yield strength 690MPa)
Welders certified to DIN-EN 287-1
Welding process: MAG according to EN ISO 4063
Shielding gas M21 according to EN ISO 14175

Accessories included:
• Plug-in steel front wall, approx. 400 mm high
• Connecting strip for supply lines to the tractor unit, installed at the height of the outer frame profile
• ASPÖCK-UNIBOX mounted on the connecting strip at the front with 24N, 24S, and 15-pin sockets
24N connection according to ISO-1185
24S connection according to ISO 3731
15-pin connection according to ISO-12098
• 1 spare wheel with mounting adapter under the loading platform in front of the axles on the right
• Park position on the gooseneck for warning panels when not in use
• Outer carrier of the gooseneck with mounting holes for screw-in lashing rings
First hole approx. 200 mm from the front, then approx. every 400 mm
2 pairs of screw-in lashing rings included (LC 5,000 daN)
• One mounting hole on the rear upper area of the outer carrier of the gooseneck for a screw-in lashing ring
1 pair of screw-in lashing rings included (LC 10,000 daN)
• 1 pair of recessed lashing rings in the centre rear of the gooseneck (LC 5,000 daN)
• 3 pairs of recessed lashing rings inside the gooseneck’s outer carrier (LC 5,000 daN)
• 3 pairs of lashing rings in the centre of the gooseneck (LC 5,000 daN)
• Approx. 40 mm hardwood flooring above the gooseneck
Itedeiuy Npopfx Ab Ujr
• 2” king pin
• On the gooseneck: 1 pair plug-in aluminium side walls, approx. 400 mm high, anodized design
• On the gooseneck: 1 plug-in aluminium rear wall, approx. 400 mm high, anodized ...

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.