Gradbeni stroji z nizkim nakladalnikom

carrellone ceylan 2assi 10.70m nuovo rampe

Stanje: novo, številka stroja/vozila: 1, lastna masa: 10.200 kg, največja dovoljena obremenitev: 28.800 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, barva: temno rdeča, Leto izdelave: 2021, Oprema: ABS, new Ceylan low loader semi-trailer, factory fresh, 3 axles with 1st liftable and 3rd steering axle, ABS, low bed section 10m long x 85cm high from the ground, total length 13.70m, side pillars, side extensions, Rud hooks 10 tons each, full-width double electro-hydraulic ramps, prearranged for electric winch, WARRANTY - READY FOR IMMEDIATE DELIVERY SUBJECT TO PRIOR SALE, INTERDRIVE SRL - PARMA Cgoloilglnehcdw Djp

Stanje: novo, številka stroja/vozila: 3, lastna masa: 9.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, barva: bela, Leto izdelave: 2022, Oprema: ABS, brand new Ceylan low loader semi-trailers available for immediate delivery, with double electro-hydraulic ramps, extendable outriggers, RUD hooks, 10m bed length, 85cm deck height, also available with grated ramps, EBS, 3 axles (1st liftable, 3rd steering), warranty included – DEALER: INTERDRIVE SRL - PARMA Colohzaq Rjhcdw Djgp

Stanje: novo, številka stroja/vozila: 1, lastna masa: 11.000 kg, največja dovoljena obremenitev: 28.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 870 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, barva: temno rdeča, Leto izdelave: 2020, Oprema: ABS, New Ceylan low-loader trailer, ready for registration. 3 axles, with first axle liftable and third axle steering. Equipped with EBS, full-width double hydraulic ramps, widening devices, winch preparation, loading deck height 87 cm, loading area length 9.95 m, total length 13.65 m. RUD lashing points. Immediate delivery subject to prior sale. Warranty included. Dealer: INTERDRIVE SRL - PARMA. Cgeloh S Aw Rohcdw Dop

Stanje: novo, lastna masa: 9.400 kg, največja dovoljena obremenitev: 29.600 kg, skupna masa: 39.000 kg, dolžina tovornega prostora: 13.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 850 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5, Oprema: ABS, NEW, 3-axle low loader with SAF axles, 3rd axle steering, toolbox on gooseneck, spare wheel carrier, double hydraulic rear ramps 4000 x 800 mm, manually adjustable, 3+3 RUD certified 10-ton lashing rings mounted on 6+6 slots, 2+2 CARTEC certified 8-ton lashing rings on the upper deck, low loading deck height 850 mm, low loading deck length 10,030 mm Cgjlhcsv Upfyedw Dop

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg King Pin Load: 18,000 kg Axle Load: 31,500 kg Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Cgjlhceg Sk Trjdw Djp Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Axle tools included. Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: novo, največja dovoljena obremenitev: 33.440 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.900 mm, skupna širina: 2.550 mm, skupna višina: 3.900 mm, Oprema: ABS, SCHWARZMÜLLER 3-Axle Timber/Stake Semi-Trailer - New Vehicle IMMEDIATE AVAILABILITY!! Tractor Unit Data and Equipment - 4,500 mm maximum distance from tractor unit front edge to king pin center - 2,240 mm minimum clear front space from king pin center - 1,900 mm max. rear swing radius - GCVW (Gross Combination Weight, permitted): 44 t for short and long haul, or with special permit - GVW (Technical): 39 t - Axle group load (technical): 27 t - King pin load (technical): 12 t Dimensions - Frame length: approx. 13,000 mm - Overall width: max. 2,550 mm - Loading height front/rear: approx. 1,340 mm - Trailer in level position at approx. 1,150 mm coupling height - Overall loading height: approx. 1,510 mm Construction - Welded steel frame construction - Lightweight high-strength fine-grain steel chassis - Straight frame design, all stanchion holders mounted on the chassis - Frame height at front: approx. 190 mm (without stanchion holders) - Replaceable 2" king pin - Chassis for coupling height (unloaded) approx. 1,150 to 1,250 mm with air suspension tractor unit - 12 mm phenolic plywood decking between longitudinal beams, bolted, extended to front up to landing legs (protects tractor) and at rear above running gear, flush with top edge of crossmembers - Landing legs, 2 x 12 t, single-side operation (right), force equalization - Reinforced crossbeam for loading/unloading while uncoupled Axle and Suspension - 3x SAF Intradisc Plus Integral axles, disc brakes Ø430 mm (22.5"), 9 t/axle load, reinforced axle bodies, off-road version - Axle spacing: 1,310 + 1,410 mm - Axle lift on 1st axle, automatically raises/lowers dependent on load, with forced lowering and speed-limited start-up assistance (operated via cab button and brake pedal sequence) - 6 x 385/65 R 22.5, 164K steel rims 11.75 x 22.5, ET120 mm, silver Braking System - Brake system as per EC directives 71/320 or ECE R13 - Dual-circuit air brake system as per factory specification - EBS system 2S/2M, one axle sensed - RSS (Roll Stability Support) - Spring-loaded parking brake on 2 axles - Aluminum air tanks - Brake/air connections with 2 individual coupling heads (yellow/red) - EBS/ABS socket at front Air Suspension - Air suspension with raise/lower function - Automatic level set to programmed drive height above 15 km/h - Air bag diameter 360 mm Telematics - SWIT Schwarzmüller Intelligent Telematics, "LOCAL TRAC" package - Axle load display via EBS CAN bus signal, information shown on cab display Superstructure - Extra-strong steel headboard, approx. 2,500 mm high, with 2 strong central supports, top corners chamfered approx. 300 mm/45° - Stanchion holders mounted/adjustable, spacing: approx. 600 mm, then every 2,400 mm - 6 ExTe stanchion holders type 144, bolted clamp fitting - Stanchion tilt approx. 0.8° inward (suitable for sawn timber transport) - 6 pairs ExTe stanchions 144-S with bolted fitting, telescopic (2-piece), max. load per pair 7 t, coated in original signal orange - Telescopic key for stanchion operation - Stanchion load height: max. approx. 2,800 mm - 8 claw guard plates, approx. 200 mm long, fitted between stanchion holders (side) - 6 pairs lashing hooks on stanchion holders Lighting Cjlhcdsn Hrg Row Dsgp - 24V lighting system as per EC directive 76/756/EEC - 2 full LED five-chamber tail lights "Aspöck" with integrated control unit - 2 LED front position lights - 2 rear LED marker lights - Flashing LED side marker lights, activated via indicator signal - 2 license plate lights - 2 x 7-pi

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 07/2016, vzmetenje: zrak, Leto izdelave: 2016, Oprema: dvižna zadnja plošča, Vzmetenje: zračno vzmetenje Zadnja os 1: krmiljena Celhevvwzrocdw Dsgp Zadnja os 2: krmiljena Zadnja os 3: krmiljena Največja dovoljena masa: 48.000 kg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Cena: na zahtevo Za več informacij se obrnite na Davida F Middelmana.

Stanje: novo, prevoženi kilometri: 100 km, moč: 279 kW (379,33 KM), vrsta goriva: dizel, zavore: retarder, barva: črn, vrsta prenosa: samodejen, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, Car transporter for 3 vehicles: Chassis: Scania R380 4x2 * Low frame height * 2 x 395 liter aluminium tanks * Automatic transmission * PTO unit on flywheel * Tyres: 315/60 R22.5 * Retarder * AEB – Advanced Emergency Braking * Disc brakes * Roof spoiler * Sliding roof Truck body for 1 vehicle transport * Platform load area: approx. 533 x 255 cm * Hydraulic cable winch with radio and cable remote control * Body equipped with perforated driving plates * Vehicles can be secured in any position according to DIN (VDI 2700 8.2 certified) * Body hot-dip galvanized Trailer: * BLYSS – Tandem trailer for 2 vehicles or vans * GVWR 18,000 kg * Loading area: approx. 990 x 255 cm * Extendable extension at trailer approx. 150 cm (support leg) * Aluminium loading ramps * 2 x BPW axles * ABS braking system * Trailer is equipped with perforated driving plates * Vehicles can be secured in any position according to DIN (VDI 2700 8.2 certified) * Trailer hot-dip galvanized Load securing equipment also available: * Lashing and tensioning straps * Cargo bars * Safety vests * Transport boxes * Edge protectors * Dunnage bags * Wheel chocks * etc. Financing and leasing available We manufacture bodywork of any size and type for any chassis. Cgjlhcdwjxpz Nce Dop Tarpaulin, GRP sandwich, aluminium. Visit us at: Bodywork – complete vehicles – trailers – consulting – financing Errors and prior sale excepted, no liability for printing or input errors.

Stanje: novo, največja dovoljena obremenitev: 28.660 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2025, Oprema: ABS, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * 22.5" disc brakes * Paver brake with shortened rear mudguards and manual paver switch Axles: * 3 x 9 t BPW axles * 1st lift axle with start-up aid Suspension: * Air suspension with automatic lowering during tipping process (for increased stability, deactivation possible for pavers) Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * 5-chamber tail lights with protective cover Cgolhsr Exzmscdw Dep * 1 x additional LED work light * Flashing side marker lights General Attachments: * Aluminium air tank * Jost telescopic steel landing legs with plate foot (uncoupling only when empty) * 4 m aluminium access ladder, stored on the right side above the mudguards * Enclosed plastic single mudguards * Folding underrun guard * Rear towing eye * Folding access ladder on the front left side * Document box on the front wall Frame: * Chassis made of high-strength fine-grain steel with Meiller-specific torsion cross members Tipping Body: * Half-shell steel rear tipper body (front hydraulic ram with medium working pressure) * Front wall with 600 mm front roof as tarpaulin carrier * Side walls with robust, continuous, inward-sloping top rail * Slanted front and rear wall * Overlapping tailgate with rubber seal and two additional toggle fasteners as well as automatic 2-hook locking system Thickness of bottom, side walls, front and rear wall: * Front wall 4 mm BS 70 steel * Tailgate 4 mm HBW 400 steel * Side walls 4 mm HBW 450 steel * Tailored floor of 5/6 mm Hardox 450 steel Tarpaulin: * Electric sliding tarpaulin – RAL 9006 white aluminium – with switch on chassis and remote control Load volume: * Approx. 25 m³ Saddle height: * Unladen: approx. 1,247 mm * Laden: approx. 1,217 mm Painting: * Chassis painted RAL 7021 black grey * Tipping body in RAL 9006 white aluminium General Information: * Permissible gross weight technically possible up to 39,000 kg * Errors and prior sale reserved * New vehicle with manufacturer's warranty Delivery time: * Immediately available ex works Egestorf on the A7

Stanje: rabljeno, prevoženi kilometri: 716.419 km, moč: 353 kW (479,95 KM), prva registracija: 04/2012, vrsta goriva: dizel, skupna masa: 28.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: zelen, vrsta prenosa: mehanski, emisijski razred: Euro 5, Leto izdelave: 2012, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, Tractor unit MAN TGS 28.480 6X4H lift/steered Euro 5 EEV with retarder Crane: Palfinger PK 33002-EH, 5 hydraulic extensions, with rotator and radio remote control Celhcsqnqxgjdw Degp Condition: very good, regularly serviced, with valid inspection (TÜV) Tyres: 75-95% tread remaining Trailer: Hangler S SAZEL 20-6, 2 axles, 6m base, extendable to 12.65m - 18.65m, both axles steered Condition: very good, with valid inspection (TÜV) Tyres: 60-95% tread remaining Price without trailer: €69,000 Total price: €89,000