Prodajna prikolica

ESSELMANN Hähnchen / Imbiss Verkaufsanhänger

Stanje: novo, skupna masa: 58.000 kg, Leto izdelave: 2026, MAX100 4 A 8.60 U Low Loader Semi-Trailer Technical Specifications Speed: 80 km/h Gross weight: 60,800 kg Fifth-wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Loaded fifth-wheel height: 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck With front corners chamfered at 45° and rear bevel approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area, extendable version with rear bevel approx. 1,000 mm x 8° 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) Hardwood flooring approx. 48 mm thick, checker plate over axles Ramps Tsdpfxog Sk T Do Amujc Two-piece steel ramps One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulically folding ramp sections, hydraulic lifting system and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Tyres 235/75 R 17.5 Braking system in accordance with EU standards with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc-dust primer High-quality 2-component (2K) topcoat, single-color finish in RAL shades of your choice Rear section metallized and painted in RAL 9010 (pure white) Landing Gears: JOST mechanical landing gears with 2-speed gearbox for 24 t Lifting capacity (test load 50 t) Steel structure made of high-strength fine-grain steels. Steel Grades: Steel structure made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrics in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Accessories included: One galvanized steel front wall approx. 400 mm high 2" king pin 4 wheel chocks with holder on the front wall Bracket for a rotating beacon at rear of the trailer SAF axles, two fixed axles, one trailing-steering axle, air-suspended, with drum brake, with lifting/lowering function. Trailing steering axle with electro-magnetic reverse lock, can be activated via reverse gear or manually. Axle tools Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports under the bevel of the loading area Mechanical safety lock for the loading area One spare wheel with holder in front of the front wall Yellow reflective tape along the sides, extension and rear of trailer, in accordance with EU regulations. At the galvanized front connection strip, yellow-red air couplings On gooseneck and rear plate left and right, each with mount for warning plates and socket included Mudflap at trailer rear Manual and documentation On gooseneck, plug-in ALU sideboards and rear wall approx. 2,440 x 400 mm (L x H) The rear galvanized stake pockets are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs WADER container locks in the loading area for a 20', 30' or 40' container (± 30 kg) 6 pairs of stake pockets for plug-in stakes

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 07/2016, vzmetenje: zrak, Leto izdelave: 2016, Oprema: dvižna zadnja plošča, Vzmetenje: zračno vzmetenje Zadnja os 1: krmiljena Zadnja os 2: krmiljena Zadnja os 3: krmiljena Največja dovoljena masa: 48.000 kg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Todpfxevvwzrj Amuoc Cena: na zahtevo Za več informacij se obrnite na Davida F Middelmana.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 11.800 kg, največja dovoljena obremenitev: 25.500 kg, skupna masa: 36.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/1998, dolžina tovornega prostora: 13.300 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 450 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 R 17.5, barva: rdeča, Leto izdelave: 1998, Oprema: ABS, Bertoja extendable low loader, 3 axles with 2nd and 3rd self-steering axles, air suspension, ABS, year 1998, cradle length 5.30m with an additional 3.50m extension, ground clearance 45cm, removable module above the axles, adjustable detachable gooseneck, wired remote control for steering self-steering axles, good condition. DEALER: INTERDRIVE SRL - PARMA. Tsdpfjwg E Rbjx Amujc

Stanje: novo, lastna masa: 1.300 kg, skupna masa: 3.000 kg, dolžina tovornega prostora: 6.200 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 2.300 mm, Leto izdelave: 2025, Prosim, dogovorite si termin za ogled za nakup na kraju samem ali naročite neposredno preko naše spletne trgovine trailershop. PON. – PET. od 08:00 do 12:30 in od 14:00 do 18:00 ali kadar koli preko naše spletne trgovine trailershop. Vsebina in slike so avtorsko zaščitene – logotipi zaščiteni z blagovno znamko 10/25. Slike in vse navedene informacije so nezavezujoče, cena ne vključuje tovora. Močne blagovne znamke pri ANHÄNGERWIRTZ že več kot 34 let. Na zalogi je več kot 850 prikolic, dodatna oprema naprodaj; servis za Anssems – Brian James Trailers – Blyss – Brenderup – Böckmann – Cheval Liberté – Debon – Eduard – HULCO – HENRA – Koch – Martz – Neptun – SARIS – Tomplan – Trailershop – Variant – WM Meyer in še veliko več... Tedpfx Amjxn Up Tousc Prodajna cena za novo blago z garancijo, z možnostjo prikaza DDV-ja. Dostava po vsej državi in v BENELUX. Možen je izvoz v EU po neto ceni in carinjenje (prosimo povprašajte). Razprodaja 10/25.

Stanje: novo, skupna masa: 2.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.200 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 2.300 mm, Sales Trailer Fanshop Merchandise VHSP 520 black The object shown here is an example of our work and has already been delivered to the customer. As a specialist vehicle manufacturer focusing on custom builds, we design, plan, and construct vehicles according to YOUR specifications. Dimensions, add-ons, interior fittings, color scheme, and technical features can all be tailored to your needs. Questions about feasibility? Send us your list of requirements or a simple sketch and you will receive a detailed quotation with individual pricing. For inquiries, please use 0388. Technical Specifications: * Permissible total weight: 2,500 kg * Internal dimensions: 520 x 220 x 230 cm (LxWxH) * Exterior and interior walls in high-gloss black with black profiles * Chassis: tandem axle, steel/galvanized with 4x extendable support legs, rubber-sprung axles Tjdpfsv Tt Ipjx Amusc * 13-inch tires * Automatic reverse and jockey wheel * Body: polyester sandwich panels (UV-resistant), insulated panel construction * Walls and ceiling approx. 33 mm thick * Sales hatch on the right-hand side (in direction of travel) * Entrance door at the front via drawbar * 2x wall ventilators * 230V/CEE connection * 4x LED light strips along the entire length * Power sockets distributed throughout the interior * Electrically operated advertising front along the full length, controlled by internal switch * Bag shelf * Interior fittings for merchandise sales: counter and wall-mounted work surface with intermediate shelf, partitions and anti-slip edges * Shelf above sales hatch * Glass top with payment rail above sales counter The images may not correspond to the standard specification; technical modifications (e.g. tire sizes) are subject to change.

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks Todpfx Amohlz S Njuec • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: novo, dolžina tovornega prostora: 4.900 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 3.100 mm, Sales Vehicle for Merchandise/Non-Food, Mobile Fan Shop The object shown here is an example of our work and has already been delivered to the customer. As a vehicle manufacturer specializing in bespoke builds, we design, plan, and construct vehicles according to YOUR requirements. Dimensions, attachments, interior fittings, color design, and technical specifications can all be customized according to your preferences. Do you have questions regarding feasibility? Simply send us your list of requirements or a basic sketch and you will receive a detailed quotation with individual pricing. Please refer to code 0131 for inquiries. Technical Data: * Overall dimensions (L/W/H): approx. 4900 x 2400 x 3100 mm (external) * Body: Polyester sandwich panels (UV-resistant), constructed as insulated slatted sections * Walls and roof approx. 33 mm thick * 1 x sales flap on the right side (in direction of travel) with gas struts * 1 x rear entrance door, approx. 650 mm wide, equipped with 1 handle/lock and 2 additional locks * 2 x wall-mounted ventilators * Vehicle lighting: compliant with StVZO, 12 Volt, using the base vehicle’s original lights * Black matt edging strips * Trailer hitch up to 2000 kg * Electrically operated GRP sandwich roof front section Compact Equipment: * Sales counter with glass facing for displaying merchandise/fan items * Hanging rail for textiles/merchandise Tjdpfx Aov T Hnpjmujc * Work surface with intermediate shelf along the wall * Folding counter at the front wall with supporting leg (for T-shirt press) * Fittings/trim profiles in aluminium * LED lighting * 230V/16A external connection, power distribution with RCD circuit breaker * 3 x LED strips in aluminium profiles as ceiling lighting * 4 x double power sockets * Countertop glass shelf approx. 500/180 mm, shelf in Resopal and glass showcase supports Images may not correspond to the standard specification; technical modifications (e.g. tire sizes) are subject to change.

Stanje: novo, skupna masa: 2.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 2.300 mm, Crew Transporter / Ambulance Trailer VHSP 500 The item shown here is an example of our work and has already been delivered to the customer. As vehicle builders specializing in custom constructions, we design, plan, and build vehicles according to YOUR specifications. Dimensions, fittings, interior layout, color design, and technology can all be freely determined. Do you have questions about feasibility? Send us your list of requirements or a simple sketch and you will receive a detailed quotation with individual pricing. Please use #0268 for inquiries. Technical Data: * Trailer Type: VHSP 500 * Permissible Total Weight: 2,500 kg * Internal Dimensions (L/W/H): 500 x 230 x 230 cm * Chassis: Galvanized steel frame * V-drawbar, 2 axles * Premium axles by ALKO * 4 stabilizing supports * Wheels: 175 R14 * Floor: Anti-slip with PVC covering * Body: 33 mm thick walls * Rear entrance door with lock (clear width 1,200 mm) * Side entrance door with lock Todpfx Aev Uhidomuec * 4 ventilation grilles, body framed in white aluminum profiles * Electrical system: 12V * Rear slide-out tray in aluminum, mounted under frame/subframe, approx. 2,500 mm x 1,000 mm Interior Fitting / Furniture: * Opening window DOMETIC S4 900 x 400 mm * 1 bench seat ca. 2,000 x 500 mm with folding lid and upholstered leatherette cushion * 2 tall cabinets/shelves with adjustable shelves at the rear including 3 drawers below (clear height 200 mm) for material storage on the right side wall * Tall cabinet at partition wall on the left with fixed panel for cable routing (e.g. oxygen hose, etc.) * 1 assembly of supplied folding stretcher for left rear wall including wall reinforcements for stretcher mounting * 2 bench seats with cushions and table in front section * 1 under-sink cabinet with superstructure (upper doors) including water supply/boiler/canister/pump etc. Power outlets for chargers in the overhead cabinet. Overhead cabinet lockable. * 4 recessed lashing eyes in the floor * 1 overhead cabinet above the front seating group with upward-opening doors * All furniture made from blockboard panels/laminated panels with Resopal coating, color as required * Wall cladding as polyester panel (per sqm) * Electrical system/540: 230V/16A switch panel, residual-current device, 4x circuit breakers, CEE socket, 6 x double sockets, 4 x LED light strips in aluminum profile, 4 x exterior LED lights as mounted lamps Images may not show standard equipment; technical modifications (e.g., tire sizes) are subject to change.

Stanje: rabljeno, FlexFuse GmbH – vaš partner za vrhunske mobilne prikolice za pripravo in prodajo hrane ter opremo za gostinske obrate, ki jo lahko najamete. Želite uresničiti svojo poslovno idejo na področju kulinarike ali se profesionalno predstaviti na dogodku, festivalu ali ulični zabavi? Z družbo FlexFuse GmbH v Leipzigu boste izkoristili prednosti obsežne in moderne flote vozil, ki ustrezajo najvišjim standardom kakovosti – dopolnjena pa je z široko izbiro profesionalne opreme za gostinske obrate, ki jo lahko najamete. Naše prednosti – vaše koristi: Ekskluzivna flota vozil: sodobne mobilne prikolice za pripravo in prodajo hrane v različnih velikostih in izvedbah. Celovite rešitve na enem mestu: po želji kakovostna oprema za gostinske obrate – od cvrtnikov in žarov do hladilnikov in zamrzovalnikov. Maksimalna prilagodljivost: obdobja najema od nekaj dni do več mesecev. Higienski standardi in varnost: temeljito očiščena, tehnično preverjena in takoj pripravljena za uporabo. Opomba: Uporaba je dovoljena samo na ozemlju Nemčije. Z družbo FlexFuse GmbH ne dobite samo mobilne prikolice za prodajo, ampak tudi prilagojeno celovito rešitev za vaš uspeh – zanesljivo, kakovostno in prilagodljivo vašim potrebam. Kontaktirajte nas zdaj in si zagotovite mobilno prikolico za pripravo in prodajo hrane, ki jo želite, z dodatno opremo za gostinske obrate! Notranje mere približno: 3920 x 2220 x 2170 mm - Zunanje mere približno: 5327 x 2300 x 2820 mm - 1 x okno za prodajo na desni strani v smeri vožnje - Dovoljena skupna masa: 1500 kg - Enosno - Pnevmatike: 13" - 1 x vrata z zaklepom - Stranice iz nerjavečega jekla, delovne površine - Odzračevalna kapuca - 1600 mm - z motorjem, regulatorjem, filtrom - Luč Todpfxszw N D Rs Amusc - Dvojni električni žar - 73 cm - Royal Catering - gladka površina - 2 x 2200 W - Dvojni električni cvrtnik - 2 x 16 l - 6400 W - odtočni ventil - Royal Catering - Električni bain-marie - 1,2 kW - za GN 1/1 z višino 150 mm - z odtočnim ventilom - Hladilna vitrina ECO - 1200x335mm - 5x GN 1/4 - Kombinirani hladilnik/zamrzovalnik Inox

Stanje: dober (rabljeno), konfiguracija osi: > 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2008, dolžina tovornega prostora: 14.890 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 910 mm, skupna dolžina: 14.890 mm, skupna širina: 2.740 mm, skupna višina: 910 mm, medosna razdalja: 12.030 mm, Leto izdelave: 2008, Oprema: dvižna zadnja plošča, Konfiguracija osi Zadnja os 1: dvižna os; največja obremenitev osi: 9000 kg Zadnja os 2: največja obremenitev osi: 9000 kg Zadnja os 3: največja obremenitev osi: 9000 kg Zadnja os 4: največja obremenitev osi: 9000 kg Zadnja os 5: največja obremenitev osi: 9000 kg Todpfezupa Hox Amujc Teže Lastna teža: 17.100 kg Nosilnost: 50.900 kg Največja dovoljena masa: 68.000 kg Funkcionalne lastnosti Višina tovorne površine: 90 cm Stanje Tehnično stanje: dobro Vizualno stanje: dobro Poškodbe: nobene Finančne informacije Cena: na zahtevo Identifikacija Registrska oznaka: ZZ-82-29 Dodatne informacije Za dodatne informacije se obrnite na Davida F. Middelmana.