Mini bager

Volvo ECR 48 C

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 3.660 h, = Dodatne možnosti in dodatna oprema = - Ravnalna lopata - Sistem za hitro menjavo orodja - Standardna globoka lopata Pjdpfoy Tw Dyjx Ab Degt = Dodatne informacije = Namen uporabe: gradbeništvo Pogon: gosenice Lastna teža: 4.985 kg Za dodatne informacije se obrnite na Geerta Geuensa.

Stanje: zelo dobro (rabljeno), moč: 11,5 kW (15,64 KM), skupna masa: 1.865 kg, Leto izdelave: 2020, obratovalne ure: 1.300 h, Oprema: hidravlika prijemala, hidravlično kladivo, TAKEUCHI TB 216 Letnik izdelave: 2020 Delovne ure: 1300 Teža: 1865 kg 2x opozorilna bakla Raztegljivo podvozje Priklop za kladivo Pgodpfey Er Auex Ab Dst Priklop za grabež Hitromenjalec ODLIČNO STANJE

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 3.234 h, = Dodatne možnosti in oprema = - Planirna žlica - Hitri priključek - Standardna izkopna žlica Pjdpfszbxdvjx Ab Dsgt = Dodatne informacije = Pogon: Gosenice Lastna teža: 4.985 kg Za več informacij se obrnite na Geerta Geuensa.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 137.500 km, moč: 154,45 kW (209,99 KM), število postelj: 2, število sedežev: 3, vrsta goriva: dizel, vrsta prenosa: mehanski, barva: originalen, prva registracija: 04/1995, proizvajalec šasij: IVECO, model šasije: EUROCARGO, skupna dolžina: 7.300 mm, skupna širina: 2.500 mm, skupna višina: 3.650 mm, konfiguracija osi: 4x4, kapaciteta rezervoarja za gorivo: 200 l, skupna masa: 10.500 kg, lastna masa: 7.500 kg, položaj volana: levo, velikost pnevmatike: 365/80 R20, Leto izdelave: 2019, Oprema: celoletne pnevmatike, dodatne luči, enojna postelja, enoposteljne postelje, klimatska naprava, kopalnica, markiza, meglenke, navigacijski sistem, parkirni grelec, parkirni senzorji, pogon na vsa štiri kolesa, pogradi, popolna servisna zgodovina, prha, registracija vozila, servovolan, sončna elektrarna, spojka prikolice, vgradna kuhinja, vozilo za nekadilce, zapora diferenciala, Po naročilu izdelan in popolnoma opremljen ekspedicijski tovornjak. Pgedpfx Aex N E T Ieb Det

Stanje: rabljeno, 0502 DOSTAVNIK IVECO DAILY Dostavnik Iveco Daily 2016 Kilometri: 416.000 Moč: 107 kW - 145 KM Redno servisiran Prostornina motorja: 2300 ccm Dizel Euro 5B Desna stranska vrata 3 sedeži Ročni menjalnik Dolžina: 360 cm Širina: 175 cm Višina: 200 cm Nosilnost: 1.265 kg * KAROSERIJA ZA OBNOVO NA VEČ TOČKAH * Registrska: FC723JK Pgodpfx Absyi Ai Sj Djt € 5.500 + DDV

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Pgsdpfx Abshlz S Ne Det Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 11.200 h, Različne vidne sledi uporabe. Pgsdpfey Eadasx Ab Dot

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 1.833 h, Nadgradnja: kabina za voznika s popolnim pogledom in ogrevanjem, poravnalni ščit 990/1240x230 mm, širina gosenic pribl. 230 mm, nastavljiva širina osi, 2 dodatna hidravlična priključka, žlica za bager 400 mm z zobmi, največja vlečna sila 32,3 kN, doseg pribl. 3,5 m. Kubota trivaljni dizelski motor D 782, 778 ccm, 9,6 kW, 2 hitrosti vožnje 2,1-3,8 km/h. Prikazani delovni čas: 1.833 h. Prodaja samo pravnim osebam. PRI IZVOZU JE ZA PLAČILO SAMO NETO CENA!!!!! VSI PODATKI BREZ GARANCIJE, POSEBEJ GLEDE OPREME IN PRIBORA. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji (glejte Impresum). Pjdey Dwllspfx Ab Degt

Stanje: rabljeno, prevoženi kilometri: 243.786 km, moč: 96 kW (130,52 KM), prva registracija: 12/2009, vrsta goriva: dizel, skupna masa: 300 kg, barva: bela, vrsta prenosa: mehanski, število sedežev: 9, Leto izdelave: 2009, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, pogon na vsa štiri kolesa, * VW T5 Caravelle Dolga * Klimatska naprava * Tempomat * Navigacija * 2,5 L 93 kW * 243.786 km * Leto izdelave 2009 * 9 sedežev * Servisna knjižica * 2 ključa * Dobro stanje * WV2ZZZ7HZ9H013272 Pgsdpsx Iyhdofx Ab Djt * Delovni čas od ponedeljka do petka 07:30-12:00 13:00-18:00, sobota 07:30-17:00. * E-mail: * Tel/Whatsapp/Viber: Alexandar Ilic * Tel/Whatsapp/Viber angleško: Mladen Ilic

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Dear Sir or Madam, We invite you to familiarize yourself with our offer. Volume discounts are available when purchasing multiple containers. ▪ Mounting brackets for hooklift systems according to DIN 30722-1, fitted with rear external rollers and a subframe made from INP 180 External rollers greaseable and replaceable ▪ Lifting bar Ø 50 mm, hook height 1,570 mm ▪ Container floor made from 5 mm St 37.2 (S235JR) ▪ Side walls made from 3 mm St 37.2 (S235JR) ▪ Rounded transition between floor and side wall ▪ Frame spacing 750 mm ▪ Frame profile U 80 x 50 mm ▪ End profile made from robust round tube Ø 90 mm ▪ Double-winged door with Dutch door lock and lateral safety central locking in accordance with UVV ▪ Door lock fitted with container door opening aid ▪ Continuous hooks for tarpaulins and nets Pjdsyybvtepfx Ab Dogt ▪ Galvanized safety climbing ladder at the front according to UVV ▪ Container primer-coated inside and out, exterior lacquered in a single color (any color from the RAL palette) ▪ Warning labels ▪ Container tested and approved in compliance with DGUV regulations A wide range of configurations is available to adapt the container to the customer’s requirements. We encourage you to request an individual quotation.