Polpriklopnik kiper

Schmitz Cargobull SKI 24 SL 8.2 Stahl Liftachse

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.636 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.300 mm, prostornina tovornega prostora: 60 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength, aggregate chassis made of ALUMINUM, 140 mm frame height! (max. 39t) Axles and suspension: "Disc brake 22.5", Jost axle assemblies 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with start assist (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension, Wabco Trailerpulse tire pressure monitoring system with ZF wheel-mounted sensors Tires and wheels: 6 wheels with 385/65 R 22.5 tires (manufacturer's choice), Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120, kingpin screwed into a 10 mm thick plate Pjdpfxofakkce Ah Rsgp Landing legs: aluminum drop landing legs, 2 x 10t support load, aluminum pivoting feet used for air suspension Brake system: compliant with E.G. standards, two-line braking system, Wabco EBS electronic system with RSS (Roll Stability Support), spring-actuated braking system acting on two axles with control at the rear, aluminum air tank system, premium modulator Electrical system: compliant with StVZO, with 2 LED five-chamber Aspöck Europoint taillights integrated into aluminum rear, 24V system with 1x 5-pin and 2x 7-pin sockets, LED side marker lights, 2 separate LED work lamps at the rear, 2 LED work lamps at the height of the landing gear, 1 LED work lamp inside front left, operable from outside Superstructure / Body: "Interior fully welded" Front wall load 17,250 dN, rear and side walls 10,250/13,400 dN, aluminum tipper body, side walls made from 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with top and bottom rails, plank profiles inside fully welded, floor as moving floor system installed over 140 mm aluminum cross beams, floor load approx. 7 t/m², cross beams closely spaced (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles beveled, smooth straight rear wall with 2 aluminum swing doors 50/30 mm thick with 4 locking bars integrated into a welded aluminum rear frame mounted in Teflon and stainless steel bearings; following wall made of reinforced top aluminum rail with Kevlar curtain for complete emptying, side brush seal and additional Kevlar side curtain, integrated discharge chute with foldable closing plate at rear left, externally operable, inspection window rear left, 1 sampling gate per rear door (total 2), service door front left Hydraulic system: "Cargo Floor" moving floor system in the floor with hydraulically driven aluminum profiles on aluminum square tubes with approx. 670 PE-HD gliders, approx. 6 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and model to be specified, operating pressure 190–240 bar max., aluminum end pieces welded into the floor, electric controls at rear left with cable remote in a lockable waterproof box Accessories: PVC mudguards with rubber mud flaps, aluminum spare wheel holder, foldable aluminum side underrun protection, 1 tool box approx. 800x460x430 mm plastic, approx. 3.7 m aluminum ladder, roll tarp 680g/m² quality with roll tarpaulin system incl

Stanje: rabljeno, lastna masa: 6.227 kg, največja dovoljena obremenitev: 29.773 kg, skupna masa: 36.000 kg, prva registracija: 10/2024, dolžina tovornega prostora: 10.540 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 2.100 mm, prostornina tovornega prostora: 54 m³, vzmetenje: zrak, barva: siv, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, elektronski program stabilnosti (ESP), Errors and prior sale excepted. All information provided without guarantee. Pjdsvih D Rjpfx Ah Rsgp

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2024, naslednji pregled (TÜV): 11/2025, Oprema: ABS, Schmitz Cargobull SKI 24 SL 10.5 Scrap Tipper Body * FOR RENT * Scrap tipper body 55.5 m³ * SCB axles * Swing doors * Air suspension * Air control system * Lift axle * Sliding tarpaulin (roll tarp) * 3x cross members for stability * Load pressure gauge * Automatic lowering during tipping * ISO air connections with red and yellow coupling heads * 2x 7-pin electrical sockets * 15-pin electrical socket * ABS connection * Platform on the front wall * Folding underrun protection * Disc brakes * LED lights Pgjdpfxjv Ttx Uo Ah Rjp Rental available! Interim sale and errors expressly reserved! Sale exclusively according to our Terms & Conditions. Important Notice – Important Information: Despite careful examination of all details in our offer, errors may occur. In some cases, these are caused by data transmission errors between the various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of section 145 of the German Civil Code (BGB). Rather, it is information for contract negotiation. The information provided here is without guarantee and does not represent warranted characteristics.

Stanje: rabljeno, največja dovoljena obremenitev: 33.707 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 8.912 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 50 m³, skupna širina: 2.550 mm, skupna višina: 3.672 mm, Leto izdelave: 2025, Oprema: ABS, STAS 3-axle Hardox steel tipper 50 cbm "EXTREME" rock tipper First registration 09/2025, condition NEW Pedjxriu Eepfx Ah Rsgp Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body design in width) Unladen weight: 8,293 kg Z-chassis, cranked version Continuous floor panel in 6 mm Hardox steel HB450 4 crusher angles evenly distributed along the entire length of the floor, fully welded Front and side walls made of 5 mm Hardox steel HB450 Inclined front wall, with internal access Deflector plates running the full length of the sidewall (to protect mudguards) Hydraulic tailgate (with swinging function) HYVA tipping cylinder type Alpha, suitable for high and low pressure ALU landing legs, full load capacity 2x pneumatic vibrators mounted beneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lifting axle with starting aid WABCO trailer EBS with RSS anti-skid protection WABCO Smartboard Automatic tipping lowering function Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holders Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available immediately from us with FULL SERVICE RENTAL.

Stanje: novo, največja dovoljena obremenitev: 29.773 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.807 mm, širina tovornega prostora: 2.440 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 52 m³, skupna širina: 2.550 mm, skupna višina: 3.900 mm, Leto izdelave: 2025, Oprema: ABS, * Aluminijasta nadgradnja z dvojnimi vrati * Žito premetavalo * Avtomatska regulacija višine * Orodjarna * Dvigni prva os * Platforma z lestvijo * Rolna ponjava * Zaščita pred podvozjem * Wabco SmartBoard * Osí Schmitz z diskovo zavoro -----* Dimenzija pnevmatike: 385/65R22,5 Pgedpfjyc Rhcex Ah Rjp * Tehnično največja dovoljena masa: 39000 kg * Dovoljena nosilnost: 12000 kg * Lastna masa: 6227 kg * Skupna dolžina: 11060 mm * Potrdilo o ustreznosti (SP): novo vozilo ----Številka vozila/Vehicle: 11770----Pridržana pravica do sprememb in napak----Oglaševanje in različni napisi so bili digitalno odstranjeni.-----Z veseljem vam bomo pri vseh formalnostih, ki nastanejo ob nakupu vozila, nudili pomoč in nasvet. Poročajte nam o vaših željah in predlogih, mi pa bomo poskrbeli za ostalo. Med drugim vam lahko za doplačilo ponudimo naslednje storitve:----* Prevzem vašega starega vozila * Tehnični pregled/odobritev SP * Celovita ureditev za izvoz * Posredovanje pri financiranju * Ureditev izvoznih registracijskih tablic * Prevoz vozil * Registracija vozil * Reševanje in transport vozil ----?VAŠA VTS EKIPA

Stanje: novo, konfiguracija osi: 3 osi, prostornina tovornega prostora: 55 m³, skupna dolžina: 10.520 mm, skupna širina: 2.300 mm, skupna višina: 3.990 mm, vzmetenje: zrak, velikost pnevmatike: 385/65-22,5, barva: zelen, Leto izdelave: 2026, Oprema: ABS, - EBS Brand new at PAVIC. Available immediately! PAVIC 3-Axle 55 m³ Tipper Semi-Trailer with Lift Axle Technical Specifications: Coupling height: 1250 mm Length: approx. 10,522 mm Width: approx. 2,300 mm Height: approx. 2,380 mm Technical axle group load capacity: 27,000 kg Technical kingpin load capacity: 12,000 kg Unladen weight: 8,520 kg CHASSIS: Heavy-duty and particularly durable I-beam main frame, manufactured from high-strength MC700 steel, welded using automated robotic welding process. BODY: Volume: 55 m³ Floor plate: HARDOX450, thickness 5 mm Side walls: HARDOX450, thickness 4 mm Front wall: HARDOX450, thickness 4 mm Tailgate: HARDOX450, thickness 4 mm A resonator / vibrator is installed at the front section underneath the body to loosen solidified bulk material when tipped (see photos). TIPPER BODY: Trough design with hydraulic tailgate. Suitable for agriculture, forestry, recycling (scrap), and more. HYDRAULIC CYLINDER (LIFT): Heavy-duty hydraulic cylinder (brand HYVA – C) single-circuit AXLES: 3 × 9-ton SAF CD axles (BI9–22S) with disc brakes (SBS2220) SUSPENSION: Air suspension. LIFT AXLE: Automatic lift axle on the 1st axle. TYRES: 6 × 385/65R22.5 (premium brand tyres) RIMS: 6 × steel rims BRAKING SYSTEM: WABCO braking system 2-line braking system according to EU regulations EBS 2S/2M Pneumatic parking brake 1 × yellow air coupling 1 × red air coupling 1 × brake pressure valve TPMS (tyre pressure monitoring system) KINGPIN: 1 position, 2” (brand: JOST or SAF) LANDING LEGS: Mechanical aluminium landing legs. Each leg is operated via its own locking mechanism (after coupling). ELECTRICAL SYSTEM: Voltage: 24 V 2 × 7-pin and 1 × 15-pin ISO connections EEC-compliant lighting according to standard: SAE rear lights Side marker lights Brake warning lights Reverse lights Lighting ASPÖCK (EUROPOINT III): 2 combined tail/brake lights (red) 2 combined indicator lights (orange) 1 license plate light ACCESSORIES: 6 × mudguards 2 × mud flaps 2 × reflective strips and reflective plates (rear and sides) 1 × rear underrun protection 2 × wheel chocks with holders 1 × side aluminium guard Pgsdpfxoy N Tngs Ah Rep 1 × toolbox 1 × working platform (painted and bolted) 1 × rolling tarpaulin (incl. mechanical support bow) PAINT WORK: Before painting, surfaces are smoothed and then cleaned. Then: sandblasted to SA 2.5, followed by: 2 coats of primer 2 coats of acrylic top-coat RAL colours: Chassis (KTL): Black Body: Green (similar to RAL 6016 yellow-green) For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. General Information Year of manufacture: 2026 Axle configuration Tyre size: 385/65-22.5 Brakes: Disc brakes Suspension: Air suspension...

Stanje: novo, številka stroja/vozila: Produktpalette, lastna masa: 6.750 kg, največja dovoljena obremenitev: 32.250 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.950 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.150 mm, prostornina tovornega prostora: 50 m³, skupna dolžina: 10.300 mm, skupna širina: 2.550 mm, skupna višina: 3.670 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, stanje pnevmatik: 100 odstotek, Rešitev prevoza po meri Konfigurirajte svoje Fliegl vozilo glede na vaše zahteve. Prikazano vozilo je zgolj primer. Proizvodnja in oprema se izvajata individualno po želji kupca. Dodatne informacije Šasija polprikolice kiper Izjemno fina zrnata jeklena varjena konstrukcija, v osnovni lahki izvedbi, sedelna plošča z zamenljivim kraljevskim zatičem številka 2 Patentan zaobljen sprednji zaključek 24 t, dvorazredni podporni vitel, enostransko upravljanje, z ravnim spodnjim delom, brez kompenzacije pomika Zagozde za kolesa s pritrjevalnikom Preklopna zaščita proti naletu od zadaj Pol-lupinski blatniki Integriran nosilec blatnika z zaščiteno površino proti kamenju Palica za cerado z držalom Vlečna kljuka zadaj Premi in vzmetenje BPW preme z diski s premerom 430 mm Osna/nosilna konstrukcija merjena z laserjem za zmanjšanje obrabe pnevmatik in porabe goriva Zračno vzmetenje 1. os samodejna dvižna os, vključno s prisilnim spuščanjem in pomočjo pri izstavi Vroče cinkan dvižni mehanizem za os z 10-letno garancijo proti prerjavenju Zavorni sistem 2-vodni pnevmatski zavorni sistem, barvno označene cevi za lažje servisiranje Parkirna zavora z vzmetno posodo 2 varni priključni glavi spredaj, brez povezovalne cevi EBS (elektronski zavorni sistem) z vtičnico spredaj, brez povezovalnega kabla Pozor: Priklopno vozilo sme vleči samo vlečno vozilo, ki zagotavlja učinkovitost ABS! Z dvigalnim in spustnim ventilom Sistem za stabilnost vožnje vozila Kolesa in pnevmatike 385/65 R22,5 Jeklena platišča, tovarniško srebrna Sistem za nadzor tlaka v pnevmatikah "RDKS" v skladu z ECE R 141, prikaz na zaslonu v vlečnem vozilu, preko EBS, brez vgradnje v LKW (pogoj: predpriprava v LKW, uporabno samo za osnovno obutev). Elektrika 24 V, večkomorni žarometi, stranske rumene LED luči Stranske rumene LED luči povezane z utripalniki "utripajoče stranske luči" 2 x 7-polne varnostne vtičnice spredaj, brez povezovalnih kablov Hidravlika Nizkotlačni cilinder maks. 170 bar, najmanjša stopnja trdo kromirana, s HDK navojno spojko, fiksni del, NW 48 mm (brez cevi) Upravljanje hidravlike preko pomožnega pogona tovornjaka Korito Jekleno korito iz visoko odpornega HB 400 jekla, poševna sprednja stena z zunanjim nosilcem hidravličnega cilindra. Nosilci za lopato in metlo na zunanji strani sprednje stene. Notranja stran: dostop ob sprednji steni. Stranske stene enotne debeline 3 mm, dno enotne debeline 3 mm Membranska zadnja stena Notranja širina spodaj cca 1440 mm Zadnja stena iz aluminija, nihajno nameščena z "dvojno tečajno spono" in z dvokrilnimi vrati delitev 1/2 do 1/2, zgoraj z vrtljivim nosilcem, vsak vrata s polžastim drsnikom. Stoječa platforma z dostopom, priključna plošča za zrak/elektriko in zavore z velikim delovnim prostorom za najboljšo uporabnost. Prekrivna cerada s stranskim odlaganjem na FR-desno, z centralnim zaklepanjem na FR-levo Registracijska država / tablice Nemčija Homologacija po EG 2007/46 Statična odpornost skladno z EN 12642 Pgjdoi Rizfepfx Ah Rjp 24/7 servisna linija Pripravljeno za enovrstični nosilec registrske tablice Opozorilna tabla po ECE-70 Obrisna označba z odsevnimi trakovi po ECE R 048, ob strani bela in zadaj rdeča Barvanje Okvir: DB 7350 Novagrau "10 let garancije proti predrjavenju" Korito: RAL po želji, enobarvno Prekrivna cerada: RAL 7035 svetlo siva

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.900 mm, prostornina tovornega prostora: 40 m³, Oprema: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle assemblies 22.5" / off-road, 3 x 9-ton axles with air suspension, 1st axle lift with traction aid and electric operation, raise & lower valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with 385/65 R22.5 tires on STEEL rims, 2" king pin bolted into a 10mm plate, mechanical landing gear with single-side operation, braking system per EEC standard, Westinghouse two-line system, spring brakes on two axles and EBS electronic system Wabco with RSS (Roll Stability Support), aluminum air tanks, electrical system per StVZO with two Aspöck five-chamber lights, 24-volt system, aluminum tipper body, Edbro hydraulic system with approx. 2m hydraulic hose, 6 PVC mudguards with rubber mud flaps, lateral underrun protection, rear underrun protection, catwalk on the frame, fully welded, LL rubber seal, spindle locks on the tailgate, prepared for vibrating plate, mud-tight! ADDITIONAL EQUIPMENT AVAILABLE TO ORDER AS REQUESTED COLOR FREELY CHOOSABLE Pgedpfsu Dvw Eox Ah Rsp +590€ delivery costs *Pictures and offers non-binding*

Stanje: rabljeno, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 10.149 mm, širina tovornega prostora: 2.325 mm, višina nakladalnega prostora: 2.285 mm, prostornina tovornega prostora: 55 m³, Leto izdelave: 2023, Oprema: ABS, ferroSTAR 54,9 cbm sivo Tip podvozja: Z-šasi Medosna razdalja (mm): 1310-1310 Višina sedla (mm): 1150 Širina šasije (mm): 1400 Širina tovornega prostora (mm): 2325 Tehnično dovoljena skupna masa: 39 = 12 + 9 + 9 + 9 Notranja višina spredaj (mm) (IHF): 2285 Notranja višina zadaj (mm) (IHB): 2285 Prostornina (m³): 54,9 Pgodpjzmcn Ujfx Ah Rjp Skupna širina (mm): 2550 Medosna razdalja (mm) (WB): 6600 Skupna dolžina (mm): 11520,836 Material šasije: Jeklo Dimenzije pnevmatike: 385/65R22.5 Dolžina tovornega prostora (mm): 10149 Proizvajalec osi: SAF Izvedba osi: Intra Izvedba zavor: Kolutne zavore Tip zavore: SAF - SBS 2220 Globina vtiskanja (ET): 120 Možnost 1: prva os z dvigljivo osjo in pomočjo pri speljevanju Aktivacija pomoči pri speljevanju: prek gumba v tovornjaku (vgradnja gumba ni del opreme) in s trikratnim pritiskanjem zavore Zračno vzmetenje ECAS z ventilom za dvigovanje in spuščanje Spuščanje zračnega vzmetenja: Samodejno spuščanje zračnega vzmetenja med nagibanjem, ročno zaklenljivo prek nadzorne plošče (Smartboard), ter stikalo na šasiji Pneumatična spojna glava: Evropska spojna glava tipa Palm Proizvajalec pnevmatik: Izbira proizvajalca Platišča: Jeklena Tip pnevmatik: Za regionalni promet Matice: Odprte Pokrovčki matic: Plastični Podporne noge: Aluminijaste, nameščene spredaj na šasiji, z dvostranskim, individualnim upravljanjem, nosilnost 20 t / par Upravljanje podvozja: Ročno Položaj nadzorne plošče (Smartboard): Na levi strani v smeri vožnje, pred osmi Orodjarna škatla: Na levi strani v smeri vožnje, pred osmi Nosilec za rezervno kolo: Na desni strani v smeri vožnje, pod šasijo Število ščitnikov blata na blatniku: 2 kosa Tip ščitnika blata na blatniku: Clear Pass Proizvajalec razsvetljave: Aspöck Tip razsvetljave: ECOLED II Delovne luči (upravljanje s stikalom): Da Položaj delovnih luči (upravljanje s stikalom): 2 LED zadnji luči za vzvratno vožnjo, nameščeni zadaj na levi in desni strani, na nosilcu luči Položaj delovnih luči (upravljanje s stikalom): 2 LED delovni luči spredaj, nameščeni na levi in desni strani, v območju podpore Proizvajalec nagibnega cilindra: Hyva (STAS, izbira proizvajalca) Tip nagibnega cilindra: Hidravlični cilinder z manjšim ohišjem Kot nagiba: Standardni Model nagibnega cilindra: Hyva - FC 169 Hod nagibnega cilindra: 7130 Hidravlična spojka: Vrtljiva spojka Hidravlična spojka - velikost: 1 Hidravlična spojka - spol: Ženski Hidravlična spojka - cev: 2.100 mm Tip nadzorne plošče (Smartboard): ECAS upravljalna enota Aluminijasta lestev: Z dolžino 2,8 m, nameščena na desni strani v smeri vožnje Nosilec za metlo in lopato: Da Položaj nosilca za metlo in lopato: S po 3 nosilci, nameščen na šasiji na levi strani v smeri vožnje Položaj nosilca za metlo in lopato: Na čelni steni na levi strani v smeri vožnje Manometer za obremenitev: Ø 63 mm - nameščen na armaturni plošči na boku Ščitnik blata za podvozje: Črn z logotipom STAS, nameščen po celotni širini podvozja Montaža ščitnika blata za podvozje: Fleksibilna Plastične podloge: Z dvema plastičnima podlagama, vključno z nosilcem Zračna in električna konzola: Nameščena na desni strani v smeri vožnje Zadnja stena: Tip krilnih vrat A-znak: Zložljiv na zadnji steni, nameščen na desni strani v smeri vožnje Talna plošča: Iz 6 mm HB450 Položaj gumijastih podložk: Nameščene pod vzdolžnimi nosilci talne plošče Čelna stena: Iz 4 mm HB450 Stranska stena: Iz 4/3 mm HB450 Zadnja stena: Iz 4 mm HB450 Število tečajev zadnje stene: 3 pari tečajev Izvedba krilnih vrat: Razdeljena 1/2 na 1/2, z

Stanje: novo, največja dovoljena obremenitev: 30.050 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.664 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.165 mm, prostornina tovornega prostora: 52 m³, Leto izdelave: 2025, Braking System: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Disc brakes * Brake pad wear indicator (not connected) ----Axles: * 3 x 9 t SAF axles * 1st and 3rd axles are automatic lift axles, controlled via the EBS-E system ----Suspension: * Air suspension with lifting and lowering function (automatic lowering during tipping – can be manually blocked via SmartBoard or by switch on the chassis) ----Electrics / Lighting: * Tire pressure monitoring system (Wabco Trailerpulse) Pgodpfswgg Uzox Ah Rop * Wabco Smart-Board * Start assist activated via button in the truck – no truck-side installation required – as well as by pressing the brake pedal three times * 2 x 7-pin and 1 x 15-pin sockets * Aspöck LED lighting * 2 LED reversing lights (activated via reverse gear) * 1 LED work light each on the side at the support legs ----General Equipment: * Aluminum air tanks * Weweler crank landing gear * Side underrun protection * Folding underrun guard with handle * Speedline Diamond aluminum rims * 1 x plastic toolbox on left side approx. 860 x 520 x 500 mm * Air blow gun with 16 m hose reel in toolbox * Closed single plastic mudguards * 1 dust bag incl. holder on right side * 3m aluminum ladder stored on right above mudguards * Shovel and broom holders on left above mudguards * Load pressure gauge mounted at the front of the chassis * Access steps and standing platform mounted at the front of the frame ----Chassis: * Aluminum chassis frame ----Tipping Body: * Aluminum rear tipping trough – rectangular – with smooth side walls * Hyva hydraulic ram, 250 bar * Straight 4 mm aluminum front wall * Steps mounted on inside of the left front wall of the body * Smooth side walls inside and outside * Double-walled 600 mm sidewall profiles – 30 mm thick – 3 mm inside and 2 mm outside * Side wall profiles continuously welded inside, 90° corners with right-angled profile between floor and side walls – ensures the full floor width can be used * Top rail 90 mm wide * 6 mm wear-resistant aluminum floor with 110 Brinell quality * Combination double-wing rear doors – upright, with double hinges and reinforcement profiles, each with grain shoot and all-round rubber seal * When doors are open, they are fixed by chains to lie flat against the side walls * Fourfold lower door locking hooks automatically open during tipping – can be pneumatically locked using valve on the frame ----Roll Cover: * Roll tarp – in RAL 9005 deep black – with three side tension belts * Trapezoidal tarp support 150 mm high on front wall and rear tailgate ----Load Volume: * Load volume 51.8 m³ ----Fifth Wheel Height: * Fifth wheel height 1,150 mm ----Info: * Superstructure and chassis painted with acrylic paint in RAL 9005 deep black * --Permissible gross weight of 39,000 kg technically possible-- * New vehicle without initial registration, with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf