Three-way tipper trailerMEILLER
MZDA 18.23, Bordamatik links, seitl. Rollplane
Three-way tipper trailer
MEILLER
MZDA 18.23, Bordamatik links, seitl. Rollplane
Fiksna cena plus DDV
42.900 €
(51.051 € bruto)
Leto izdelave
2026
Stanje
Novo
Lokacija
Egestorf 

Osnovni podatki
Cena in lokacija
Fiksna cena plus DDV
42.900 €
(51.051 € bruto)
- Lokacija prodajalca:
- Eichenstich 12, 21272 Egestorf, Nemčija

Pokliči
Tehnične podrobnosti
Dimenzije in teža
Skupna masa:
18.000 kg
Največja dovoljena obremenitev:
13.320 kg
Dolžina tovornega prostora:
4.900 mm
Širina tovornega prostora:
2.380 mm
Višina nakladalnega prostora:
900 mm
Osi in kolesa
Konfiguracija osi:
2 osi
Varnostne funkcije
ABS
Podrobnosti ponudbe
- ID oglasa:
- A221-45-762
- Referenčna številka:
- 6296
- Posodobitev:
- nazadnje dne 15.09.2026
Opis
Brakes:
* Wabco TEBS-E / ABS (electric braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums
----Axle:
* 2 x 9 ton BPW or SAF axles
----Suspension:
* Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers)
----Electrical System / Lighting:
* Tire Pressure Monitoring System (TPMS)
* 15-pin power connector
* 5-chamber tail lights with protective cover
----Drawbar / Fifth Wheel:
* Curved central tube drawbar with height-adjustable 50 mm fifth wheel (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit)
----General Components:
* Aluminum air tank, welded box-type drawbar
* Front support jack
* Rear underrun protection
* Enclosed plastic mudguards
----Tipping Body:
* Steel 3-sided tipping body with M-Jet side boards
* Continuous side walls - without center supports
* Right side wall pivoting via manual central locking - preparation for long levers and hinges for a folding side wall
* Hydraulically folding left side wall (side board automation)
* Rear tailgate pivoting with automatic cam lock and 150 mm rear gate
* Manual metering device via chain
----Thickness of floor, side walls, front and rear walls:
* Front wall made of 3 mm STEELECT 240 steel
* Side walls with stable, continuous, inward-sloping top rail
Crjdpfx Anozd I Dcsuji
* Side walls and rear gate made of 4 mm STEELECT steel (HBW 400 steel)
* 5 mm bridge floor made of STEELECT steel (HBW 450 steel)
----Roll-over Cover:
Roll-over cover (RAL 9006) with crank handle at the rear and guide rail on the front wall
----
Painting:
* Chassis painted in RAL 7021 black-gray
* Painting of side boards in RAL 9006 white-aluminum
----General Information:
* Vehicle superstructure complies with EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images
----Delivery Time:
* Immediately, from approximately week 37/2026
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
* Wabco TEBS-E / ABS (electric braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums
----Axle:
* 2 x 9 ton BPW or SAF axles
----Suspension:
* Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers)
----Electrical System / Lighting:
* Tire Pressure Monitoring System (TPMS)
* 15-pin power connector
* 5-chamber tail lights with protective cover
----Drawbar / Fifth Wheel:
* Curved central tube drawbar with height-adjustable 50 mm fifth wheel (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit)
----General Components:
* Aluminum air tank, welded box-type drawbar
* Front support jack
* Rear underrun protection
* Enclosed plastic mudguards
----Tipping Body:
* Steel 3-sided tipping body with M-Jet side boards
* Continuous side walls - without center supports
* Right side wall pivoting via manual central locking - preparation for long levers and hinges for a folding side wall
* Hydraulically folding left side wall (side board automation)
* Rear tailgate pivoting with automatic cam lock and 150 mm rear gate
* Manual metering device via chain
----Thickness of floor, side walls, front and rear walls:
* Front wall made of 3 mm STEELECT 240 steel
* Side walls with stable, continuous, inward-sloping top rail
Crjdpfx Anozd I Dcsuji
* Side walls and rear gate made of 4 mm STEELECT steel (HBW 400 steel)
* 5 mm bridge floor made of STEELECT steel (HBW 450 steel)
----Roll-over Cover:
Roll-over cover (RAL 9006) with crank handle at the rear and guide rail on the front wall
----
Painting:
* Chassis painted in RAL 7021 black-gray
* Painting of side boards in RAL 9006 white-aluminum
----General Information:
* Vehicle superstructure complies with EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Sample images
----Delivery Time:
* Immediately, from approximately week 37/2026
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2001
162 Oglasi na spletu
Pošlji povpraševanje
Telefon & Faks
+49 40 33... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake


















































