Tovornjak s ploščadjo

MAN 26.480 6x4-4 Hydrodrive Fassi Kran F545 Jib

Stanje: novo, prevoženi kilometri: 400 km, moč: 352 kW (478,59 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2026, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, pogon na vsa štiri kolesa, žerjav, Vehicle: MAN TGS 26.480 6x4H-4 BL CH HydroDrive Vehicle type: Flatbed truck and chassis, suitable for crane installation Cab color: black With day registration for 2025 Engine • Type: MAN D2676 LF85 • Power: 352 kW (480 HP) • Torque: 2,400 Nm • Emission standard: Euro 6d Transmission • MAN TipMatic 12-speed automatic • Reinforced single-disk clutch (430 mm) • Drive programs: Efficiency, Manoeuvre, Idle Speed Driving, Rock-Free Mode Chassis • Wheelbase: 3,600 mm • Rear overhang: 1,950 mm • Main axle spacing (between rear and trailing axle): 1,350 mm • Frame height above cab: up to 4,000 mm • Frame longitudinals thickness: 8 mm • Frame end: straight Axles • Front axle: 9,200 kg, steered, HydroDrive without through-drive • Rear axle: 13,000 kg, HY-axle, not steered, no drive-through • Trailing axle: 9,000 kg, steered, liftable, non-driven • Axle ratio: i = 3.70 Air Suspension • Electronically controlled air suspension (ECAS) on trailing axle • Automatic level control • Suspension capacities: FA 9,500 kg / RA 13,000 kg / TA 8,000 kg Brakes • Electronic Brake System (EBS) • ABS, ASR • High-performance engine brake MAN EVBec (multi-stage) • Disc brakes on all axles • Electronic parking brake Tyres and rims • Front axle: 385/55 R22.5, steel rims 11.75x22.5 • Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 • Trailing axle: Michelin 315/70 R22.5, Alcoa matte finish Cab • Type: FN, flexible, narrow, standard roof • Comfort seats: air-suspended, heated, armrest • Multifunction steering wheel • Central locking • Climatronic air conditioning • Comfort lower bed • Storage in seat console and storage compartments • Interior style: Moon Grey • Sun blinds, tilting/sliding roof • Various storage options • USB sockets • LED lighting technology Permissible Loads Chodpsy Sqqqsfx Agtoc • Technical gross weight: 26,000 kg • Axle loads: FA 9,000 kg / RA 11,500 kg / TA 7,500 kg • Technical trailer load: max. 30,000 kg Tanks • Fuel tank: 400 l • AdBlue tank: 60 l Assistance Systems • ESP, ASR, cruise control • Emergency braking assistant • Lane departure warning • Digital tachograph • Advanced navigation system (7 inch) • MAN SmartSelect Bodybuilder Interfaces • Prepared for crane installation • Trailer coupling: RINGFEDER type 4040G150A • Various electric and pneumatic connections Features • HydroDrive: Hydraulic front-wheel drive for more traction • Driver comfort features • Factory interfaces and preparation for municipal, construction, and authority applications as well as flexible bodies ---- FASSI Loader Crane F545RA.2 xe-dynamic Base Unit • Type: F545RA.2 xe-dynamic • CE Directive EN 12999 HD5S2 compliant • Color: RAL 3020 traffic red, cylinder black Slewing Range • Continuous rotation Hydraulics • Double-acting hydraulic cylinders • Piston rods hard-chrome plated Articulation System • Double linkage system with PROLINK • Articulated arm tiltable up to 15° over-centre Overload Protection • Electronic overload shutdown FX500 • FSC stability control • LMB II • Emergency stop and visual alarm Valves & Filters • Pressure relief and load-holding valves • High pressure filter • Separate hydraulic tank 180 l with filter and oil cooler at base Control System • FASSI remote control RCH/RCS • Pressure value display • Danfoss D850 valve block with 4 control valves • Emergency operation Stabilizers • Hydraulically extendable on both sides • Support width: 7.79 m Speed Control • Dynamic control — load-dependent Additional articulation

Stanje: novo, Leto izdelave: 2026, "HD Truck Solutions" OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES AT OUR LOCATION IN PORTA WESTFALICA, GERMANY. FOR ALL CUSTOMERS IN ACUTE NEED SITUATIONS (URGENT CAPACITY EXPANSION OR REPLACEMENT INVESTMENT). Your advantages: Chodpsyntlusfx Agtsc - Fully equipped vehicles ready for immediate use (crane trucks, timber trucks, hooklift tippers) - Immediate availability directly from the manufacturer - Superstructure, assembly, commercial vehicle expertise - Excellent price-performance ratio - Financing options - Trade-in of your used vehicles --- Effer Loading Crane 955-8s + Jib 6s - Control block on crane column, continuous rotation - Hawe 4-function proportional control block with activations - Radio remote control with DISPLAY and function keypad and three-color indicator light column - FPI (Flow Power Increase) multi-step device with automatic control - PROGRESS 2.0 electronic system according to EN12999 with graphic and alphanumeric display panel - Lifting moment control in different working zones, proportional stability monitoring via PROGRESS system - Slewing via gearbox and slewing ring - ETL (Effer Twin Links) double knuckle system - 2nd boom with 10° overbend - Mounting plate for winch up to 3500 daN, mounted beneath the second extension - Durable plastic bushings on crane extensions - Double-acting cylinders with pilot-operated check valves - Extension cylinders equipped with sequence valves, end-of-stroke shock absorbers, and HSS (High Speed System) regeneration valve* - Hydraulic support lift, total width 8710 mm (3200 + 3200 mm) - Outriggers remote-controlled with proportional control - Manual swing-up mechanism for stabilizer legs - Outrigger cylinder feet with ball joints - System prepared for constant pump - High-pressure filter (with spare filter part) - Two-component paint (black painted cylinders in RAL 9005) - Oil tank capacity 260 l, mounted on crane - Load hook with a lifting capacity of 22 t - Mounting kit (for cranes with standard base only) - Oil cooler for pumps with delivery rate up to 130 l/min - CE Declaration of Conformity - Classification according to EN 12999 HC1 S1 HD5 Effer Loading Crane 955-8s (8x extension): 2.92 m = 23,840 kg 4.69 m = 15,720 kg 6.36 m = 11,150 kg 8.13 m = 8,380 kg 10.00 m = 6,575 kg 11.94 m = 5,290 kg 13.98 m = 4,380 kg 16.11 m = 3,720 kg 18.32 m = 3,220 kg 20.58 m = 2,820 kg Jib 6s (6x extension): 23.44 m = 1,380 kg 24.95 m = 1,250 kg 26.63 m = 1,130 kg 28.38 m = 1,030 kg 30.02 m = 955 kg 31.77 m = 850 kg 33.55 m = 720 kg For further questions, our team is available in the following languages: We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski نحن نتكلم العربية = Further Information = Year of manufacture: 2026 General condition: very good Technical condition: very good Visual condition: very good Price: on request

Stanje: novo, prevoženi kilometri: 400 km, moč: 352 kW (478,59 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2026, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, pogon na vsa štiri kolesa, žerjav, Vehicle: MAN TGS 26.480 6x4H-4 BL CH HydroDrive ? Vehicle type: Flatbed truck and chassis, suitable for crane mounting ? Cab color: black With daytime registration 2025 Engine ? Type: MAN D2676 LF85 ? Power: 352 kW (480 HP) ? Torque: 2,400 Nm ? Emission class: Euro 6d Transmission ? MAN TipMatic 12-speed automatic ? Reinforced single-disc clutch (430 mm) ? Driving programs: Efficiency, Manoeuvre, Idle Speed Driving, Rock Free Chassis ? Wheelbase: 3,600 mm ? Rear overhang: 1,950 mm ? Main axle spacing (between rear axle and trailing axle): 1,350 mm ? Frame height above cab: up to 4,000 mm ? Frame longitudinal member thickness: 8 mm ? Frame end: straight Axles ? Front axle: 9,200 kg, steered, HydroDrive without through drive ? Rear axle: 13,000 kg, HY-axle, non-steered, without through drive ? Trailing axle: 9,000 kg, steered, liftable, non-driven ? Axle ratio: i = 3.70 Air Suspension ? Electronically controlled air suspension (ECAS) on trailing axle ? Automatic level control ? Spring load capacities: FA 9,500 kg / RA 13,000 kg / TA 8,000 kg Brakes ? Electronic braking system (EBS) ? ABS, ASR ? High-performance engine brake MAN EVBec (multi-stage) ? Disc brakes on all axles ? Electronic parking brake Tyres and Rims ? Front axle: 385/55 R22.5, steel rims 11.75x22.5 ? Rear axle: Goodyear 315/70 R22.5, steel rims 9.00x22.5 ? Trailing axle: Michelin 315/70 R22.5, Alcoa matte Cab ? Type: FN, flexible, narrow, standard height ? Comfort seats: air-suspended, seat heating, armrest ? Multifunction steering wheel ? Central locking ? Climatronic air conditioning Codpfx Agsy Sqq Dstshc ? Lower comfort bed ? Storage in seat console and storage boxes ? Interior styling: Moon Grey ? Sun roller blinds, sliding roof ? Various storage compartments ? USB ports ? LED lighting technology Permissible Weights ? Technical gross vehicle weight: 26,000 kg ? Axle loads: FA 9,000 kg / RA 11,500 kg / TA 7,500 kg ? Technical towing capacity: max. 30,000 kg Tanks ? Fuel tank: 400 l ? AdBlue tank: 60 l Assistance Systems ? ESP, ASR, cruise control ? Emergency brake assist ? Lane departure warning ? Digital tachograph ? Advanced navigation system (7 inch) ? MAN SmartSelect Body Interfaces ? Preparation for crane mounting ? Trailer coupling: RINGFEDER Type 4040G150A ? Various electrical and pneumatic connections Special features ? HydroDrive: Hydraulic front-wheel drive for increased traction ? Comfort features for the driver ? Factory interfaces and preparation for government, construction, and municipal operations as well as flexible body options ----FASSI Loader Crane F545RA.2 xe-dynamic Base Unit ? Type: F545RA.2 xe-dynamic ? CE Directive EN 12999 HD5S2 compliant ? Color: RAL 3020 traffic red, cylinders black Slewing range ? Continuous rotation Hydraulics ? Double-acting hydraulic cylinders ? Piston rods hard-chromed Joint system ? Double-linkage system with PROLINK ? Articulating arm can be over-extended up to 15° Overload protection ? Electronic overload shutdown FX500 ? FSC stability control ? LMB II ? Emergency cut-off and optical alarm Valves & Filters ? Pressure relief and load-holding valves ? High-pressure filter ? Separate hydraulic tank 180 l with filter and oil cooler at the base Control ? FASSI radio remote control RCH/RCS ? Pressure value display ? Danfoss D850 control block with 4 control valves ? Emergency controls Outrigger ? Hydraulically extendable on both sides ? Outrigger width: 7.79 m Speed control ? Dynamic Control – load-dependent Additional ar

Stanje: novo, največja dovoljena obremenitev: 36.156 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading platform length: 13,600 mm Loaded saddle height: 950–1050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Loading platform: Extendable loading platform with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). Chodpfx Ajg Sk Tvsgtsc 1 pair of lashing rings (LC 10,000 daN). 6 pairs of external foldable lashing rings (LC 5,000 daN). 2 pairs of external foldable lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tension belts, LC 2,000 daN. Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (test load 50 t). Axles: SAF axles: SAF CD air suspension axles with disc brakes (377 mm), featuring lifting/lowering function (ET 120). Trailing steering axles with electromagnetic reversing lock, activated via reverse gear or manually. Axle tools. (± 80 kg) Brake system: Brake system compliant with EU regulations, EBS-E (2S2M), without connecting lines to the tractor unit. Chassis: Chassis made from high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the shot-blasted welded frame provided by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single colour in RAL shade of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Electrical equipment: Electrical system in accordance with EU regulations. LED lighting, 24V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S, & 15-pin. Connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: At the galvanized front connection bar, yellow-red air couplings. 2 wheel chocks with holder. 2" kingpin. Galvanized steel front wall approx. 2,200 mm high (± 105 kg) EN12642-XL. Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer. European reflector plates (red-yellow) on the rear of the trailer. Loading platform with approx. 38 mm thick hardwood floor (± 320 kg). 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform (± 30 kg). 1 spare wheel holder under the loading platform, right side in direction of travel. Tyres 435/50 R 19.5 as selected by manufacturer. One mudflap at the rear of the trailer. Manual and documentation on USB stick. Mounting bracket for revolving warning beacon at the rear of the trailer. On the gooseneck and rear panel left and right, each with a bracket for warning plates with socket. One INOX toolbox, cross-mounted under the loading platform (1,000 x 400 x 2,500 mm) (± 135 kg). 6 pairs of WADER container locks in the loading platform for 1x20’ container, 2x20’ containers or 1x40’ container; an additional locking position is provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes (± 95 kg). Holder for 1,000 mm stakes (± 45 kg).

Stanje: rabljeno, prevoženi kilometri: 462.000 km, moč: 309 kW (420,12 KM), prva registracija: 06/2006, vrsta goriva: dizel, skupna masa: 40.000 kg, zavore: retarder, vrsta prenosa: samodejen, emisijski razred: Euro 4, Oprema: filter saj, žerjav, Žerjav: Retarder, klima, dvižna in krmilna os, Fassi 800 6x hidravlično in flyjib 6x hidravlično, linije za grabilec. Vzmetenje: listno-zračno. Chsdpezhhwkefx Agtec

Stanje: novo, Leto izdelave: 2024, "HD Truck Solutions" OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO FIND THEMSELVES IN AN ACUTE DEMAND SITUATION (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT). Your advantages: - Fully equipped vehicles ready for immediate use (crane trucks / short timber / hooklift) - Immediate availability directly from the manufacturer - Body construction, assembly, commercial vehicle specialist - Best price-performance ratio - Financing options - Trade-in of your used vehicles Crane HIAB X-HiPro 302 E 6 JIB 70 X-4 - 6x hydraulic extension Csdpfx Asynta Ejgtohc - 4x hydraulic extension (jib) - Radio remote control - Hydraulic lines for attachments For further questions, our team is at your disposal in the following languages: Wir sprechen Deutsch We speak English Nous parlons français Noi parliamo italiano Mówimy po polsku Мы говорим по-русски Govorimo Srpskohrvatski = Further information = Year of manufacture: 2024 General condition: very good Technical condition: very good Visual condition: very good Price: On request

Stanje: rabljeno, Leto izdelave: 2024, barva: sivo-črna, lastna masa: 2 kg, vrsta goriva: bencin, vrsta prenosa: mehanski, TITLE: NEW FLATBED CONTAINER WITH REMOVABLE STEEL POSTS AND TWO SIDE BOARDS PER SIDE IN TR5, REAR BOARD IN THREE-WAY FOLDABLE CHEQUERED STEEL (OPENS AS A BOOK, TILTS UPWARDS AND DOWNWARDS) WITH 200 MM BEAMS SUPPORTING THE FLOOR, REINFORCED IN THE MIDDLE WITH A 2.50 MT SECTION ON THE OUTSIDE, LOAD CAPACITY 16,000 kg / 18,000 kg. NO. 5 RETRACTABLE HOOKS ON LEFT SIDE AND NO. 5 ON RIGHT SIDE, PLUS NO. 2 FRONT TIE-DOWN HOOKS ALIGNED WITH THE BEAMS. REF: 24-N-06 TYPE: Flatbed with TR5 C side boards NEW: Yes COVER: No OPENING: Rear triple steel opening and 2+2 side boards DIMENSIONS TOTAL EXTERNAL LENGTH: 7.00 m + 0.20 m of beams Csdpfjvky Anjx Agtohc OUTER BODY WIDTH: 2.55 m FRONT BOARD HEIGHT: 1.60 m + 0.10 m horns REAR BOARD HEIGHT: 1.00 m SIDE BOARD HEIGHT: 0.80 m VOLUME: 14 m³ WEIGHT: 2270 kg BASE: 5 mm smooth steel SIDE WALLS: TR5 COLOUR: RAL 7000 grey Prices shown do not include VAT. Please contact our sales department for a current price comparison and updated terms and conditions. For more information: Loris: 3484773001 URL: #removablespecialists SCARRABILI AURORA Operates in the sales and purchase of industrial and commercial vehicles, specialising mainly in waste management. Specialists in trucks, trailers and hook-lift equipment. A ready-to-deliver fleet of over 50 trucks and more than 150 hook-lift bodies and containers, with or without cranes. E.&O.E. Due to the number of listings and details provided, Aurora advises verifying all information with our sales staff.

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: Codpfoiuy Nljx Agtohc - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function Chsdpfx Agoi Dwlwjtoc - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: rabljeno, Leto izdelave: 2024, barva: sivo-črna, lastna masa: 2 kg, vrsta goriva: bencin, vrsta prenosa: mehanski, TITLE: NEW REMOVABLE PLATFORM CONTAINER WITH TWO SIDE BOARDS PER SIDE IN TR5 AND REAR BOARD IN TRIPLE-OPENING CHEQUERED PLATE STEEL, BOOK OPENING, TILTABLE UPWARDS AND DOWNWARDS. FLOOR RESTING ON 200 MM BEAMS CLAD ON THE OUTER SIDE. REINFORCED IN THE CENTRAL AND FRONT AREAS, AND EXTRA REINFORCEMENT FOR EXCAVATOR OR TRACKED VEHICLE LOADING. NO. 2 FRONT RETRACTABLE HOOKS AND 60 MM HOOK. REF: 24-N-37 TYPE: platform with TR5 side boards NEW: yes COVER: no OPENING: rear triple-opening in steel, and lateral 2 + 2 OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 6.20 m + 0.20 m beam + 0.10 m rear door with hinges INTERNAL/EXTERNAL WIDTH: 2.48 m / 2.55 m FRONT BOARD: 1.50 m REAR BOARD: 1.00 m in chequered plate steel SIDE BOARD: 0.80 m in TR5 CAPACITY: 12 m³ WEIGHT: 2,410 kg FLOOR: 5 + 2 mm chequered plate WALLS: in TR5 COLOUR: red Errors and/or omissions excepted. Prices do not include VAT. Please contact our sales department for up-to-date price and condition quotations. For more information: Loris: +39 348 4773001 URL: #specialistsinremovablebodies AURORA REMOVABLES Csdpfx Agov Aqdaotehc operates in the sale and purchase of industrial and commercial vehicles, specialising mainly in the waste management sector. Specialists in trucks, trailers and hook-lift equipment. With a ready-to-deliver fleet of over 50 trucks and more than 150 containers, hook-lift bodies with and without cranes. E&OE Given the high number of listings and details, Aurora invites you to verify the correctness of posted data with the sales staff.